Leica Geosystems Metrology Accessories Catalog 2006
Leica Laser Tracker Accessories Catalog 2006
Contents Leica Laser Trackers................... 06 Leica Industrial Theodolites & Total Stations...................... 56 4
Notes for the Reader Thank you for ordering a copy of the 2006 Leica Metrology Accessories Catalog. This catalog contains the complete range of accessories available for Leica Laser Trackers and Leica Industrial Theodolites & Total Stations. Regardless of your particular application and the Leica Metrology products you use from Leica Laser Trackers, Leica Industrial Theodolites & Total Stations and everything in-between we have you covered. Easy-to-interpret diagrams and product illustrations & descriptions let you quickly find the Leica Metrology accessories that are ideally suited for the task at hand. Most items feature a description and a picture. Some accessories show an example of how the items can be used in a typical configuration and what benefit they bring. All of our accessories, just like the rest of the Leica Metrology products, offer the same top-notch, no-nonsense design and quality. If you have any questions about our product accessories, please contact your authorized Leica Metrology sales person to receive competent guidance and make an appropriate purchasing decision. Sincerely, Your Leica Metrology Team
Leica Laser Trackers Leica Laser Tracker Configuration for Standard Tracking Systems............ 08 Leica Laser Tracker Configuration for Probing Systems..................... 10 Leica Laser Tracker Configuration for Scanning Systems................... 12 Universal CMM Accesories Leica T-Probe/T-Probe II................... 14 Leica T-Cam............................ 17 Leica T-Scan............................ 17 Tracker Stands.......................... 18 Cables & UPS.......................... 19 Remote Control Equipment................ 20 Levelling Equipment..................... 21 Overview Camera Equipment.............. 21 Meteo Station & Accessories.............. 22 Leica Reflectors......................... 24 Leica Laser Tracker 1.5 Reflector Holders.... 26 Leica Laser Tracker 0.5 Reflector Holders.... 36 Special Reflector Holders.................. 42 Hidden Point Bars....................... 46 Compensation and Field Check Tools........ 53 Shipping Container and Measuring Cart....... 55 6
Leica Laser Tracker Configuration for Standard Tracking Systems 8
Reflectors 501-510 Reflector Holders and Accessories 601-640 Leica T-Probe/T-Probe II and Accessories 201-219 9
Leica Laser Tracker Configuration for Probing Systems 10
Reflectors 501-510 Reflector Holders and Accessories 601-640 Leica T-Probe/T-Probe II and Accessories 201-219 11
Laser Tracker Configuration for Scanning Systems 12
Reflectors 501-510 Reflector Holders and Accessories 601-640 Leica T-Probe/T-Probe II and Accessories 201-219 13
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Leica T-Probe/T-Probe II 576 231 T-Probe II styli kit Recommended stylus kit for T-Probe II. Comes with 5 different styli (Scribe stylus r=0.1mm - M2, Ruby ball stylus d=3mm - M5, Ruby ball stylus d=6mm - M5, Ceramic hemispherical stylus d=0.5in - M4, Ceramic hemispherical stylus d=1.0in - M4), 3 styli extensions (100mm - M5 - carbon fibre - stem d=20mm, 200mm - M5 - carbon fibre - stem d=20mm, 40mm - M5 - carbon - stem d=11mm), 2 T-Probe II stylus adaptors - M5 with precision quick release for self identification, stylus tools for M2-M3/M4/M5 threaded styli, stylus adaptor M5-M4 and T-Probe II styli kit case. 202 576 211 T-Probe II styli kit case for standard configuration (empty) 202 576 212 T-Probe II stylus adaptor M5 Precision quick release adaptor for T-Probe II styli to remove and attach styli without re-calibration. The stylus adaptor has built in intelligence to support stylus self identification. 203 575 947 T-Probe Holder Optional T-Probe holder for save positioning the T-Probe on workstations and measurements surfaces such as car bodies. 204 575 972 575 973 575 983 Cable T-Probe, 10m Cable T-Probe, 20m T-Probe replacement battery 205 206 207 575 987 Magnetic T-Probe Stylus Compensation Kit Optional for save positioning on magnetic materials to perform stylus compensations. 208 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 14
LTD640 LTD709 LTD840 575 980 Leica T-Probe Compensation Kit For on-site compensation of T-Probe. It comes with T-Probe reference frame, wedge tool, tripod screw and light duty magnetic holder for 0.5 Red Ring Reflectors. Requires additional 0.5 Red Ring Reflector (corner cube) for compensation process. The T-Probe compensation kit fits into the LeicaT-Cam compensation kit shipping container. 209 576 213 576 214 576 215 Stylus extension 100mm - M5 - carbon fibre - stem d=20mm Stylus extension 200mm - M5 - carbon fibre - stem d=20mm Stylus extension 400mm - M5 - carbon fibre - stem d=20mm 210 210 210 576 216 Stylus extension 600mm - M5 - carbon fibre - stem d=20mm 210 576 217 576 218 Stylus extension 40mm - M5 - carbon - stem d=11mm Stylus extension 100mm - M5 - carbon - stem d=11mm 210 210 576 219 Scribe stylus r=0.1mm - M2 215 576 220 Ruby ball stylus d=3mm - M5 215 576 221 Ruby ball stylus d=6mm - M5 215 15
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 222 Edge stylus - M5 Comes with edge sphere 0.5, magnetic stylus M5 and compensation sphere 0.5 216 576 223 Stylus tool for M2 and M3 threaded styli 217 576 224 Stylus tool for M4 threaded styli 217 576 225 Stylus tool for M5 threaded styli 217 576 226 Stylus adaptor M5-M2 217 576 227 Stylus adaptor M5-M4 217 576 228 Stylus adaptor M4-M5 217 576 229 Ceramic hemispherical stylus d=0.5in - M4 218 576 230 Ceramic hemispherical stylus d=1.0in - M4 218 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 16
LTD640 LTD709 LTD840 Leica T-Cam 575 926 Sync Package for LTCbase / plus Required for Leica T-Cam but also enables synchronization and trigger with external devices. Required for upgrades and for Laser Tracker's delivered before Jan 2005 only. 222 E std. std. 575 979 Leica T-Cam compensation kit For on-site compensation of T-Cam to Tracker. Requires additional 0.5 Red-Ring Reflector (corner cube) for compensation process. It is recommended to have at least one compensation kit per factory. It comes with transportation case. 223 575 975 Overview camera for Leica T-Cam Optional overview camera that can be mounted to T-Cam. It enables save and convenient reflector lock via video image. 224 575 924 575 925 Cable T-Cam, 10m Cable T-Cam, 5m 225 225 Leica T-Scan 576 047 Reference Sphere with certificate Ø 100mm Reference sphere with 100 mm diameter for field check and alignment checks of the T-Scan system. 252 576 048 Reference Sphere Bar with certificate, 2m Reference bar with 5 spheres at 40cm distance. Each sphere to sphere distance is traceable certified. Diffuse sphere surfaces are special made for scanner measurements. 253 576 044 High speed computer for fast data collection and powerful graphical visualization (Pentium 4 Processor with 3.0 Ghz; 2 DDRAM 512 MB; Quadro4 Graphics Card) 251 17
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Tracker Stands Worlds lightest heavy duty tripod featuring Vibration free stand Light for easy transportation Large wheels for easy movements Can be taken apart for transport Quick release from minutes to seconds 575 998 Stand extension, 380mm (15) Stand extension for Laser Tracker sensor. 311 575 999 Stand extension, 180mm (7) Stand extension for Laser Tracker sensor. 312 575 997 Leica Tracker stand The Leica Tracker stand is equipped with three levelling screws and shock absorbing wheels. 313 1 575 246 Mounting plate for Laser Tracker. Allows to mount the sensor unit onto machine beds etc., requires part number 575 256. 314 576 106 Leica Stand Adaptor Rings Used to adapt a Leica Laser Tracker to Leica stand or optical instrument stand for quick mounting or removable. Material is hard coat aluminium in black anodized finish. 315 11.0 OUTSIDE DIAMETER 11.0 OUTSIDE DIAMETER METRIC TAPPED HOLE FOR LEICA TRACKER BASE ALL BOLTS (4 PLACES) 7.0 INSIDE DIAMETER CLEARANCE BOLT HOLES FOR LEICA LASER TRACKER HEAD (Metric Mounting Bolt) 3/8-16 TAPPED HOLES FOR CONNECTING SHOULDER BOLTS (4 PLACES).87.87 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 18
LTD640 LTD709 LTD840 576 128 Leica Tracker Horizontal Mount This mount allows the Leica tracker (without T-Cam) to lay securely in the horizontal position in a unique V nest (with or without adapter rings). The mount will fit to the Leica stand or an heavy optical instrument stand with 3/8 thread. Material is hard coat aluminium in black anodized finish. 316 Cables & UPS Industrial cables and Network adapters for LAN as well as UPS units 575 488 575 490 Motor cable to Leica Trackers 10m (33') Motor cable to Leica Trackers, 5m (16') 321 322 575 489 575 491 Sensor cable to Leica Trackers 10m (33') Sensor cable to Leica Trackers, 5m (16') 326 327 575 256 575 247 575 248 Elbow plug set, for motor- and sensor cable, comprising: Elbow plug, for motor cable, 16 pin Elbow plug, for sensor cable, 54 pin 328 L 575 899 LAN cable RJ45, 5m LAN cable to connect Laser Tracker with application computer 331 575 820 LAN board for Desktop PC 332 576 232 Wireless network adapter for Laptop/Desktop WiFi USB Adapter connects to 802.11b/g networks and hotspots. This article is used together with article 576233 to establish a network between application computer (Laptop/Desktop) and Laser Tracker (emscon Server). It comes with: USB Adapter for Laptop/Desktop, cradle and instruction sheet. This network configuration (576232/576233) has been tested by Leica and ensures system performance. 333 19
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 233 Wireless network adapter for emscon Server WiFi certified Access Point creates high-performance 802.11g wireless network. This article is used together with article 576232 to establish a network between application computer (Laptop/Desktop) and Laser Tracker (emscon Server). It comes with: Access Point for emscon Server, power adapter and instruction sheet. This network configuration (576232/576233) has been tested by Leica and ensures system performance. 334 575 992 575 993 Uninterruptible Power Supply UPS (220 Volt) Uninterruptible Power Supply UPS (110 Volt) 344 345 Remote Control Equipment 575 757 Wireless RF Control (EU version) Australia, EU, Czech Republic, Hungary, Malaysia, Mexico, New Zealand, Norway, Philippines, Poland, Russia, Switzerland, Thailand (Radio Frequency: 40MHz, Plugs into a USB port on a Windows computer) Incl. CD with drivers and templates for Axyz, Metrolog XG and emscon. 341 575 781 Wireless RF Control (US version) US, Brazil, Canada, Israel (Radio Frequency: 49Mhz, Plugs into a USB port on a Windows computer) Incl. CD with drivers and templates for Axyz, Metrolog XG and emscon. 342 575 965 Wireless IR Control Wireless Infra-Red Control unit for USB port. Compatible with: Windows 98 SE, 2000, ME, XP or higher. Incl. CD with drivers and templates for Axyz, Metrolog XG and emscon. 343 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 20
LTD640 LTD709 LTD840 Levelling Equipment High-performing level For measurements against gravity and monitoring stability. Ready to measure to specs within minutes (no need for 0-point adjustment) Backward compatibility (except SMART310) 576 000 NIVEL230, inclination sensor for Laser Tracker with RS232 interface; supports gravity based coordinate measurements 351 576 026 NIVEL Adapter Kit The NIVEL adapter kit is used to mount all NIVEL inclination sensor onto the Laser Tracker. Compatible with LT(D)640, LTD706, LTD709, LTD840. 352 802 905 Cable, 1.5m (Lemo - Lemo) To connect Laser Tracker with NIVEL20 or NIVEL230. 353 Overview Camera Equipment The unique overview camera allows a quick location of reflectors. While in joystick mode you direct the tracker to the point of interest. Thus it becomes an essential accessory for remotely controlled trackers. 446 000 Video Cable 10m, BNC / BNC, (LT Controller to 575 785 View finder video board). 361 575 785 View finder video board for desktop PC, incl. Cable, 1.8m. For overview camera with old Axyz versions under Windows NT 362 E 575 882 Video Grabber DX for Desktop (Axyz only), comprising: 1x 730735 Pixel View Model No. PC-CX881P (PCI), 1x 727502 Adapter Plug, 1x 446000 Video cable (10m), 1x 734412 Video Grabber Hardware Installation sheet for Axyz Users. For Windows 2000 & Windows XP 366 21
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 575 883 Video Grabber DX for Notebook (Axyz only), comprising: 1x 734694 Notebook Grabber (USB), 1x 727502 Adapter plug, 1x 446000 Video Cable (10m), 1x 734412 Video Grabber Hardware Installation sheet for Axyz Users. For Windows 2000 & Windows XP 366 575 986 Overview Camera for Laser Tracker The Optional black/white overview camera mounts on top of the Laser Tracker. It enables save and convenient reflector lock via video image. The camera functionality is supported during the various measuring modes of LTD840, LTD706, LTD709, LTD640 Laser Tracker, which has the absolute distance meter, built in. 365 Meteo Station & Accessories The most precise sensor to monitor and correct the atmospheric conditions. It is an essential accessory for any precision measurements. 575 734 Set Meteo Station HM30 with integrated pressure sensor, comprising: Meteo Station HM30, RS232 cable, 9-pole female, 1.5m. Combo-sensor for humidity/temperature with cable 3m. Power supply 100-240VAC/9VD/1150mA with universal plugs for Europe, UK, USA/Japan 401 L 575 736 Meteo Station HM30 402 575 740 Combo-sensor humidity/temperature with cable, 3m 403 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 22
LTD640 LTD709 LTD840 575 755 575 754 Surface temperature sensor PT100, 30cm Mini temperature sensor PT100 404 405 575 758 Power supply, 100-240VAC/9VDC, with universal plugs for Europe, UK, USA/Japan, Australia. 411 575 743 Leather case for meteo station HM30 412 575 737 Cable RS232 for meteo station HM30 421 575 748 575 741 575 749 575 750 575 751 575 752 575 753 Replacement cable to combo-sensor Cable to combo-sensor, 3m Cable to combo-sensor, 5m Cable to combo-sensor, 15m Cable to PT100, 3m Cable to PT100, 5m Cable to PT100, 25m 419 422 423 424 425 426 427 575 738 Multiplexer to connect up to 16 surface temperature sensors (575 755), with cables to HM30. 428 5000 090 HM30 Factory Certification Factory Certification for HM30, together with combosensor. Certificate issued for humidity, temperature and pressure to the producer's standards, performed by Revue Thommen in Switzerland. To be ordered at your local service centre (or check local possibilities). 23
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Reflectors The widest range of offering for most various applications 575 784 Red-Ring Reflector (RRR) 1.5, ball with hardened steel surface. Corner cube reflector with removable ring, protection cover for optic and certificate, in wooden box Radius 0.75 (19.05mm) ±0.0025mm, Centring of optics ±0.006mm Shape ball ±0.0015mm Acceptance angle ±30 Weight 170g Applied for - Standard applications - Dynamic and static measurements 501 575 739 Red-Ring Reflector (RRR) 0.5, ball with hardened steel surface, Corner cube reflector with removable ring, protection cover for optic and certificate, in wooden box Radius 0.25 (6.35mm) ±0.0025mm, Centring of optics ±0.006mm Shape ball ±0.0015mm Acceptance angle ±30 Weight 5g Applied for - Standard applications - Automated inspection 502 575 769 Tooling Ball Reflector (TBR) 0.5, without collar ball with hardened steel surface, ø 0.5 (12.07mm) ±0.01mm, Centring of optics ±0.006mm Shape ball ±0.01mm Max. acceptance angle ±50 (±15 for error budget < 0.01mm) Weight 5g Applied for - Standard applications - Automated inspection 503 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 24
LTD640 LTD709 LTD840 575 770 Tooling Ball Reflector (TBR) 0.5, with collar ball with hardened steel surface, ø 0.5 (12.07mm) ±0.01mm, Centring of optics ±0.006mm. Shape ball ±0.01mm. Max. acceptance angle ±22 (±15 for error budget < 0.01mm) Weight 5g Applied for - Standard applications - Automated inspection 504 575 848 Reflectors for fixed installation (RFI) 0.5, set of 5 pcs., ball with anodized aluminium surface, ø 0.5 (12.07mm), Max. acceptance angle ±50 Weight 5g. Applied for - Monitoring fixed installations - Repeatability tests - Relative measurements - Deformation measurements 505 573 510 Cateye Reflector (CER), ball with hardened steel surface, ø 75mm (2.9528), ±0.05mm Ball shape ±0.01mm Centring of optics ±0.01mm Max. acceptance angle ±60 Weight 730gr Applied for - Robot and machine operations - Dynamic and static measurements 506 575 847 Surface Reflector Kit including: - Surface Reflector with lanyard - Pin Point Stylus - 3 mm Ruby Ball Stylus - Edge Stylus - Initialisation sphere - Manual 507 25
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Laser Tracker 1.5 Reflector Holders 576 083 576 063 576 085 576 084 576 087 576 076 576 088 576 077 576 089 576 086 576 078 576 064 576 090 576 091 Reflector Holder 1.5, Offset H 24mm, Magnetic Base with Shank A Ø 6mm, Negative Rotation Reflector Holder 1.5, Offset H 24mm, Magnetic Base with Shank A Ø 8mm, Negative Rotation Reflector Holder 1.5, Offset H 24mm, Magnetic Base with Shank A Ø 10mm, Negative Rotation Reflector Holder 1.5, Offset H 24mm, Magnetic Base with Shank A Ø 12mm, Negative Rotation Refl. Holder 1.5, 25mm, Ø 5mm, MB, NEGR Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 5mm, Negative Rotation Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 6mm, Negative Rotation Refl. Holder 1.5, 25mm, Ø 7mm, MB, NEGR Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 7mm, Negative Rotation Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 8mm, Negative Rotation Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 9mm, Negative Rotation Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 10mm, Negative Rotation Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 12mm, Negative Rotation Reflector Holder 1.5, Offset H 1.0000, Magnetic Base with Shank A Ø 0.2500, Negative Rotation Reflector Holder 1.5, Offset H 1.000, Magnetic Base with Shank A Ø 0.3125, Negative Rotation Reflector Holder 1.5, Offset H 1.000, Magnetic Base with Shank A Ø 0.3750, Negative Rotation - Greatest amount of negative rotation below horizontal position - Allows for unobstructed 100% clear aperture - Centring and height tolerance within 0.0127mm (0.0005 ) - Steel with black oxide finish 620 620 620 620 620 620 620 620 620 620 620 620 620 620 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 26
1.600 PRECISION (3) P OINT N EST ON C/L OF A DIAMETER WITHIN ±.0005 1.5000 DIAMETER SMR REFERENCE H ±.0005 TO CENTERLINE OF 1.500 SPHERE MAGNET "A" DIAMETER +.0000 -.0005 PATENT PENDING 27
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 082 576 075 576 065 Reflector Holder 1.5, Offset H 24mm, Shankless, Magnetic Base Reflector Holder 1.5, Offset H 25mm, Shankless Magnetic Base Reflector Holder 1.5, Offset H 1.0000, Shankless Magnetic Base - Centring and height tolerance within 0.0127mm (0.0005) - Steel with black oxide finish - Heat-treated and hardened to Rockwell C 53-55 620 620 620 * * * PRECISION (3) POINT NEST ON C/L OF 1.6000 DIAMETER WITHIN +/-.0005 1.5000 DIAMETER SMR REFERENCE H +/-.0005 TO CENTERLINE OF 1.500 SPHERE MAGNET MAGNETS 3/32 45 CHAMFER ON (1) SIDE FOR CLEARANCE OVER INSIDE CORNER RADIUS 1.6000 +/-.0005 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 28
LTD640 LTD709 LTD840 576 066 Reflector Holder 1.5, Offset H 1.0000, with Shank A Ø 0.2500, Body Ø 0.750 - Centring and height tolerance within 0.0127mm (0.0005) - Steel with black oxide finish 620 *.750 DIAMETER 1.500 DIAMETER SPHERE REFERENCE ON CENTERLINE OF SHANK W/IN +/-.0005 H +/-.0005 TO CENTERLINE OF 1.500 SPHERE MAGNET "A" DIAMETER +.0000 -.0005 29
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 097 Edge Reflector Holder 1.5, offset H 25mm 620 576 098 Edge Reflector Holder 1.5, Offset H 1.0000 - Centring and height tolerance within 0.0127mm (0.0005) - Steel with black oxide finish - Heat-treated and hardened to R/C35-55 620 CENTERLINE OF PRECISION (3) POINT NEST IN LINE WITH DATUM "A" WITHIN +/-.0005 DATUM A 1.500 DIAMETER SMR REFERENCE H +/-.0005 TO CENTERLINE OF 1.500 SPHERE MAGNET L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 30
LTD640 LTD709 LTD840 576 099 Edge Reflector Holder 1.5, Offset H 25mm 2-1/4 620 CENTERLINE OF PRECISION (3) POINT NEST IN LINE WITH DATUM "A", DATUM B AND THE SHARP EDGE INTERSECTING POINT WITHIN +/-.0005 * DATUM "A" 1.500 DIAMETER SMR REFERENCE H +/-.0005 TO CENTERLINE OF 1.500 SPHERE MAGNET 1/4 LOCATING QUADRANT * DATUM "B" 31
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 100 Edge Reflector Holder 1.5, Offset H 1.000, 2-1/4 - Centring and height tolerance within 0.0127mm (0.0005 ) - Steel with black oxide finish - Heat-treated and hardened to R/C35-55 - CAUTION: These items will not balance over an edge by themselves but must be securely fastened to prevent reflector from dropping 620 576 101 Drift Nest Neg 1.5, Offset H 1.0000 - Universal target for non-critical reference - Can be glued or bonded to surface - Height tolerance within 0.254mm (0.010 ) - Aluminium with black anodized finish - Hard-coat 620 620 1.500 DIAMETER SMR REFERENCE 1.000 +/-.010 TO CENTERLINE OF 1.500 SPHERE MAGNET L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 32
LTD640 LTD709 LTD840 576 102 Foundation Reflector Holder 1.5 620 - Can be mounted to floor for permanent target reference - Stainless steel (3) POINT NEST FOR LOCATING 1.5 SMR OR OTHER 1.5 SPHERICAL TARGET 1.5000 DIAMETER SMR REFERENCE 1.25 MAGNET MEDIUM KNURL 2.0 REMOVABLE BRASS CAP WITH 0-RING SEAL 2.0 RETAINER 10-32 SCREW WITH O-RING SEAL 33
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 096 Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 10mm, 1.0 Inch Body - Centring and height tolerance within 0.0127mm (0.0005 ) - Steel with black oxide finish 620 1.500 DIAMETER SPHERE REFERENCE ON CENTERLINE OF SHANK W/IN +/-.0005 H +/-.0005 TO CENTERLINE OF 1.500 SPHERE MAGNET (4) PLACE S "A" DIAMETER +.0000 -.0005 1.000 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 34
LTD640 LTD709 LTD840 576 134 Tripod Reflector Holder 1.5 620 - Tripod reflector holder for consistent reference point - Steel with black oxide finish * (3) POINT NEST LOCATING AREA 1.5000 DIAMETER SMR REFERENCE MAGNET 1/4 HOLE 5/8-11 35
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Laser Tracker 0.5 Reflector Holders 576 092 Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 5mm 630 576 070 Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 6mm 630 576 093 Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 7mm 630 576 056 Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 8mm 630 576 094 Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 9mm 630 576 073 Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 10mm 630 576 074 Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 12mm 630 576 067 Reflector Holder 0.5, Offset H 12mm, Magnetic Base with Shank A Ø 6mm 630 576 058 Reflector Holder 0.5, Offset H 12mm, Magnetic Base with Shank A Ø 8mm 630 576 080 Reflector Holder 0.5, Offset H 12mm, Magnetic Base with Shank A Ø 10mm 630 576 081 Reflector Holder 0.5, Offset H 12mm, Magnetic Base with Shank A Ø 12mm 630 576 072 Reflector Holder 0.5, Offset H 20mm, Magnetic Base with Shank A Ø 4.75mm 630 576 059 Reflector Holder 0.5, Offset H 0.5000, Magnetic Base with Shank A Ø 0.2500 630 576 060 Reflector Holder 0.5, Offset H 0.5000, Magnetic Base with Shank A Ø 0.3125 630 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 36
LTD640 LTD709 LTD840 576 095 Reflector Holder 0.5, Offset H 0.5000, Magnetic Base with Shank A Ø 0.3750 630 576 061 Reflector Holder 0.5, Offset H 0.5000, Magnetic Base with Shank A Ø 0.5000 - Centring and height tolerance within 0.0127mm (0.0005 ) - Steel with black oxide finish 630 37
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 057 Reflector Holder 0.5, Offset H10mm, Shankless 630 576 079 576 062 Reflector Holder 0.5, Offset H 12mm, Shankless Reflector Holder 0.5, Offset H 0.5000, Shankless - Centring and height tolerance within 0.0127mm (0.0005 ) - Steel with black oxide finish 630 630.5000 +/-.0005 H +/-.0005 TO CENTERLINE OF.5000 SPHERE.5000 DIAMETER SPHERE REFERENCE ON CENTERLINE OF.5000 INCH BODY WITHIN +/-.0005 MAGNET (2) PLACES L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 38
LTD640 LTD709 LTD840 576 068 Reflector Holder 0.5, Offset 10mm, with Shank Ø 5mm 630 576 069 Reflector Holder 0.5, Offset H 12mm, Shank A Ø 6mm 630 576 051 Reflector Holder 0.5, Offset H 0.3125, Shank A Ø 0.2500 630 576 071 Reflector Holder 0.5, Offset H 0.5000, Shank A Ø 0.1875 630 576 103 Reflector Holder 0.5, Offset H 0.5000, Shank Ø 0.2500 - Centring and height tolerance within 0.0127mm (0.0005 ) - Steel with black oxide finish 630.5000.5000 DIAMETER SPHERE REFERENCE ON CENTERLINE OF SHANK WITHIN +/-.0005 H +/-.0005 TO CENTERLINE OF.500 SPHERE MAGNET "A" DIAMETER +.0000 -.0005 39
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 135 Reflector Holder 0.5 Drift Nest, Offset H 0.5000 - Universal target for non-critical reference - Can be glued to surface - Height tolerance within 0.254mm (0.010 ) - Steel with black oxide finish 630.5000 DIAMETER REFERENCE.500 +/-.010 HEIGHT MAGNET 576 136 Reflector Holder 0.5 Target Corner, Offset H 0.5000 - Centring and height tolerance within 0.0127mm (0.0005 ) - Steel with black oxide finish 630.5000 DIAMETER TBR REFERENCE H +/-.0005 TO CENTERLINE OF.5000 SPHERE MAGNET DATUM A TBR REFERENCE IN LINE WITH DATUM A WITHIN +/-.0005 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 40
LTD640 LTD709 LTD840 576 137 Reflector Holder 0.5, Offset H 0.5000, Shank A Ø 0.2500, Negative Rotation - Centring and height tolerance within 0.0127mm (0.0005 ) - Steel with black oxide finish.5000 DIAMETER TBR REFERENCE ON CENTERLINE WITHIN +/-.0005 H +/-.0005 TO CENTERLINE OF.5000 SPHERE MAGNET "A" DIAMETER +.0000 -.0005 PATENT PENDING 575 771 Magnetic holder with zero thickness for 0.5 reflectors 41
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Special Reflector Holders 576 054 Magnetic Holder Set for Bird Bath - Bird bath adapter for 0.5 and 1.5 reflectors - Compatible with 500/600/700/800 Leica Laser Tracker as well as IFM distance tool - Height tolerance within 0.0127mm (0.0005 ) - Stainless steel 630.5 SPHERE REFERENCE MAGNET 12MM +.0000 -.0005 1.5 SPHERE REFERENCE 25MM +/-.0005 TO CENTERLINE OF 1.500 SPHERE MAGNET 12MM +.0000 -.0005 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 42
LTD640 LTD709 LTD840 576 053 Magnetic Holder 1.5 for Bird Bath - Bird bath adapter for 1.5 reflectors - Compatible with 500/600/700/800 Leica Laser Tracker as well as IFM distance tool - Height tolerance within 0.0127mm (0.0005 ) - Stainless steel 1.5 SPHERE REFERENCE 630 25MM +/-.0005 TO CENTERLINE OF 1.500 SPHERE MAGNET 640 12MM +/-.0005 575 778 Starter bolt for tooling ball reflector 0.5 576 052 Heavy Duty Magnetic Holder for tooling ball reflectors 0.5 576 127 Light Duty Magnetic Holder for tooling ball reflectors 0.5 43
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 055 Heavy Duty Magnetic Reflector Holder Adaptor for supports with shank Ø 12mm - Universal magnetic holder for critical temporary references whilst field check or as common point for move station - Hard anodized aluminium SLIP FIT FOR 12MM +/-.0005 640 36MM 640 MAGNET MAGNET SAVER 640 640 576 104 Leica Lanyard Set 1 (full) for safe handling of 1.5 reflectors 576 105 Leica Lanyard Set 2 (partial) for safe handling of 1.5 reflectors L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 44
LTD640 LTD709 LTD840 576 107 Track and Punch SMR Nest 1.5 - Allows a 1.5 reflector to be tracked and positioned into a position, then a light tap with a small hammer on the striker will produce a small accurately located center punch mark. LANYARD PORT BASE MAGNET 3 PLACES A A (3) POINT NEST FOR LOCATING SPHERICALLY MOUNTED RETRO REFLECTOR OFFSET: 2 INCH BODY DIAMETER: 2-1/2 INCHES, KNURLED PUNCH: HARDENED TO 58-62 ROCKWELL FEATURES: SMR IS ABLE TO ROTATE UP 90 DEGREES SMR IS HELD IN PLACE BY A MAGNET AND/RETAINER IF DESIRED LANYARD PORT IS LOCATED ON SIDE OF THE BODY STRIKER 1.5000 DIAMETER SMR REFERENCE 2.0 +/-.01 MAGNET ALUMINUM BODY BLACK, HARD COAT FINISH PATENT PENDING ( SECTION A ) MAGNET 3 PLACES 45
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Hidden Point Bars Typical accessories for Laser Tracker without T-Probe to measure hidden points by a) dynamic sphere measurement => hidden point = sphere centre b) measuring two stationary points 575 854 Sphere fit tool for Cateye reflector 640 576 108 Bar Extension, Length 3.000, Shank Ø 0.2500 640.2500 "A" +.0000/-.0005 BEX - 1 ONLY +.0003 NYLON SET SCREW +.0000 -.0000.2500 -.0005 BEX-3 BEX-5 BEX-10 1.000 +/-.0005.45 6-32 (2) PLACES TAPPED HOLE 3.000 +/-.0005 5.000 +/-.0005 10.000 +/-.0005 576 109 576 110 576 111 Bar Extension, Length 5.000, Shank Ø 0.2500 Bar Extension, Length 10.000, Shank Ø 0.2500 Bar Extension, Length 1.000, Shank Ø 6mm 640 640 640 576 112 576 113 576 138 Bar Extension, Length 1.000, Shank Ø 8mm Bar Extension, Length 1.000, Shank Ø 10mm Bar Extension, Length 1.000, Shank Ø 0.1875 640 640 640 576 139 576 140 Bar Extension, Length 1.000, Shank Ø 0.3125 Bar Extension, Length 1.000, Shank Ø 0.3750 640 640 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 46
LTD640 LTD709 LTD840 576 114 Reflector Holder 0.5, Hidden Point Bar Adaptor - Assembles with different bar extension lengths and holds an 0.5 reflector on centreline - Steel with black oxide finish 640.2500 +.0003 -.0000 NYLON SET SCREW TAPPED 6/32 (2 PLACES) 2.500 +/-.0005 AIR HOLE MAGNET INSERT.500 DIAMETER SMR (REFERENCE), ON CENTERLINE WITHIN +/-.0005.5000 +/-.0005.2500 +.0000 -.0005 576 115 Hidden Point Bar Holder - For adapting a hidden point or bar extension to a magnetic base for support - Steel with black oxide finish 640 BRASS THUMB SCREW.375 1/2 SLIP FIT FOR HIDDEN POINT BARS AND BAR EXTENSIONS 47
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 116 Sphere Fit Adaptor - Adapts onto the end of a bar extension similar to a hard point, and allows the user to locate a conical nest around a construction ball in order to generate a sphere fit routine - Steel with black oxide finish 640 1.000 +/-.0005.500.2500 +.0003 -.0000.5000 DIAMETER CONSTRUCTION BALL REFERENCE NOT INCLUDED INTERNAL 6-32 SET SCREW FOR MOUNTING TO BAR EXTENSION 576 117 Hard Point - Adapts onto the end of a bar extension or hidden point bar, and allows the user to locate scribe lines or surfaces - Hardened to R/C 53-55 - Steel with black oxide finish 640 INTERNAL 6-32 SET SCREW 1.000 +/-.0005 60.500.2500 DIA. +.0005 -.0000 *.005 -.007 FLAT ON END OF POINT L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 48
LTD640 LTD709 LTD840 576 129 Tooling Ball Adaptor - Mounts to hidden point bar or bar extension similar to hard point - Connects to a construction ball and allows for 90 rotation 640 6-32 SCREW (FOR MOUNTING TO HPB or BEX).500 DIAMETER CONSTRUCTION BALL REFERENCE NOT INCLUDED C/L B-BALL CONCAVE RADIAL NEST THIS SIDE CONICAL NEST THIS SIDE 576 130 Tooling Ball 0.5, Ball Ø 0.5000, Shank Ø 0.2500 640.5000 DIAMETER BALL.5000 +/-.0005.2500 +.0000 -.0005 49
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 118 576 119 576 120 576 121 Liner Bushing, Shank Ø 10mm Liner Bushing, Shank Ø 12mm Liner Bushing, Shank Ø 0.3750 Liner Bushing, Shank Ø 0.5000 - Adapts standard 0.2500 shank to holes of other diameter - Centring and height tolerance within 0.0127mm (0.0005 ) - Steel with black oxide finish 640 640 640 640.2000 +/-.0005.45.2500 +.0003 -. 0000 A +.0000 -. 0005 576 122 Foundation Target Insert - Mounts to concrete floor foundations for permanent targeting reference 640 SLIP FIT REMOVABLE BRASS CAP 7/8".2500 HOLE OPTICAL TARGET (REFERENCE) 1/4" 10/32 X 1" FLAT HEAD SOCKET HEAD CAP SCREW RETAINER AIR HOLE SEALED PLUG 10-32 TAP MEDIUM KNURL 1-1/4" BRASS 1.0 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 50
LTD640 LTD709 LTD840 576 131 Double Vector for TBR, Shank Ø 0.2500 - Holds two 0.5 reflectors on centreline and critical offsets to represent the centreline and direction of a hole - Centring and height tolerance within 0.0127mm (0.0005 ) - Steel with black oxide finish 640.5000 DIAMETER SMR REFERENCE 2 PLACES 1.5625 +/-.0005.3125 +/-.0005 640.5000 DIAMETER SPHERES ON CENTERLINE OF "A" DIAMETER WITHIN + /-.0005 "A" DIA. +.0000 -.0005 576 132 90 Degree Adaptor, Offset 0.5000, Shaft Ø 0.25 - Represents the same centreline and height as a 0.5 tooling ball. - Accepts a hidden point bar assembly - Needed to project a 90 to a point that is obstructed from view - Centring and height tolerance within 0.0127mm (0.0005 ) - Steel with black oxide finish 640 51
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 576 133 Sphere Hidden Point Adaptor 1.5 - Accepts a bar extension or other 0.25 Shank - Allows for hidden point or sphere fit routine in 1.5 support that is hidden from view - Height tolerance within 0.0127mm (0.0005 ) - Ball shape to +0.0/-0.0127mm (0.0005 ) - Steel with black oxide finish 640 6-32 TAPPED HOLE (2) PLACES 1.5 SPHERE +.0000/-.0005 420 STAINLESS STEEL HARDENED TO R/C 53-55.7500 +/-.0005 NYLON SET SCREW 576 123 Leica Hidden Point Bar Kit for TBR (USA) consisting of: 576110, 576109, 576108, 576138, 576139, 576140, 576115, 576116, 576114, 4x 576117, 576129, 576132, 576127, 576133, 576103, 576130, 1 lot of Assembly Screws 640 L 576 124 Leica Hidden Point Bar Kit for TBR (EURO) consisting of: 576110, 576109, 576108, 576111, 576112, 576113, 576115, 576116, 576114, 4x 576117, 576129, 576132, 576127, 576133, 576103, 576130, 1 lot of Assembly Screws 640 L 576 125 Leica Laser Tracker - Reflector Holder Kit (USA) consisting of: 576110, 576109, 576130, 576117, 576116, 576120, 576121, 576135, 576136, 576137, 576131, 576064, 576065, 576098, 2x 576134, 6x 576101, 1 lot of Assembly Screws 640 L L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 52
LTD640 LTD709 LTD840 576 126 Leica Laser Tracker - Reflector Holder Kit (EURO) consisting of: 576110, 576109, 576130, 576117, 576116, 576118, 576119, 2x 576134, 3x 576101, 576064, 576077, 576075, 576097, 1 lot of Assembly Screws 640 L Compensation and Field Check Tools A regular field check plus compensation will keep your system in a perfect condition and will provide a performance to specification. 575 479 Compensation Set for 75mm Reflectors (Cateye), comprising: 575 415 Precision ball bar, motorized, 2x 803728 Magnetic Reflector Support 575 090 Adapter to ball bar 651 L 575 480 Compensation Set for 1.5 Red Ring Reflectors (Corner cube), comprising: 575 415 Precision ball bar, motorized, 2x 804 011 Magnetic reflector Support, 575 090 Adapter to ball bar 652 L 575 415 Precision ball bar, motorized, with counter weight, without reflector support. 653 575 090 Adapter to ball bar for tripods with 5/8 thread. Allows to mount a ball bar and a magnetic reflector carrier on a tripod, (ball bar and reflector carrier are not included). 654 575 836 IFM distance tool To re-determine the birdbath distance for TBR and 1.5 CCR reflectors, 12mm bore holes for reflector supports (supports not included). 655 575 837 Tripod adapter To be used for various alignment or compensation measurements. Thread for tripod 5/8. Bore hole 12mm (supports not included) - Tripod reflector holder for consistent reference point 656 53
Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 575 484 Aluminum tripod AT28, with adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and laser tracker field check equipment. Instrument height from 1.4 2.8m (4.6 9.2 ft), weight 12kg (26.4 lb) 661 575 483 Aluminum tripod AT21, with adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and laser tracker field check equipment.. Instrument height from 1.4 2.1m (4.6 6.9 ft), weight 11kg (24.2 lb) 662 574 550 Reference tool invar 665 804 011 Magnetic Reflector Holder for reflectors in spherical housings, ø 1.5 with bolt hole for 575 497 666 803 728 Magnetic Reflector Holder, for reflectors in spherical housings, ø 75mm with bolt hole for 575 497and 575 599. - Tripod reflector holder for consistent reference point 666 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 54
LTD640 LTD709 LTD840 Shipping Container and Measuring Cart Both cars and shipping container will provide best stowage and transport facilities no matter where the equipment need to travel to 575 995 Measurement Cart rack mounting for a fix installation of controllers,ups and high speed computer. This cart can be used like the regular measuring cart and in addition it can be reconfigured to shuttle cart. L =1.20m, W = 0.70m, H = 1.10m 701 576 045 Optional upgrade of measuring cart (757937) to use with T-Scan system. The measuring cart 575937 have to be upgraded when it will be used with T-Scan system - Ventilator to cool the cart - Cover plate with integrated plugs - Adapter to mount Laser Power Supply Unit 702 576 046 T-Scan measuring cart (rack-size) Small 19 rack with wheels, 18 HE height to mount: LTC plus, Cover plate for cable connection, Laser power supply, T-Scan Controller, High speed computer and UPS 703 575 939 Shipping container for tracker accessories. For Tracker with LTC base/plus 704 55
Industrial Theodolites & Total Stations Remote Control System RCS Radio Link & Remote Control............... 58 Remote Control System................... 59 Specifications RCS1100 Remote Control Unit... 60 Memory Cards and Readers Off-line link via PCMCIA (DCP05 & Axyz-CDM)..................... 61 Accessories, Cables and PC-Interfaces Cables - On-line link to application PC........ 62 Cables - DL2........................... 63 Cables - Remote Control System............ 64 Power Supplies and Batteries Mains Power Supply...................... 65 Batteries.............................. 65 Battery Chargers........................ 65 Optical Accessories for Instrumental Telescope Internal Targets......................... 66 Eyepieces and Filters..................... 66 Autocollimation Accessories.............. 67 North-Finding Gyroscopes Specifications Gyromat 2000............... 68 Diode Laser DL2........................ 69 Specifications DL2 Diode Laser Pointer....... 70 External Intensity Controller for all Types of Instruments.............. 71 Internal Intensity controller for TDM5005 and TDA5005 only............ 71 DL2 Compatible Reticules................. 71 Target Equipment Targets for Multi-Theodolites Systems........ 73 Reflectors for Total Stations............... 74 Specifications for Reflectors............... 74 1. Retro Reflective Tape Targets............ 75 2. Prism Reflectors....................... 78 3. Corner Cube Reflectors................. 79 4. 360 Reflectors....................... 79 Tribrach............................... 79 Aluminum Tripods....................... 80 Wooden Tripods......................... 80 Translation Stages....................... 81 Meteo Station & Accessories............... 81 56
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Radio Link & Remote Control System RCS Configuration with wireless radio modem and registration via remote control. Applied for - Radio modem for communication range >20m - RFcontrol to allow single operator and record from point of interest 575 757 Wireless RF Control (EU version) Australia, EU, Czech Republic, Hungary, Malaysia, Mexico, New Zealand, Norway, Philippines, Poland, Russia, Switzerland, Thailand (Radio Frequency: 40Mhz, Plugs into a USB port on a Windows computer. Incl. CD with drivers and templates for Axyz, Metrolog XG and emscon. 575 781 Wireless RF Control (US version) US, Brazil, Canada, Israel (Radio Frequency: 49Mhz, Plugs into a USB port on a Windows computer)incl. CD with drivers and templates for Axyz, Metrolog XG and emscon. Std. = Standard delivery Opt. = Option 58
Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 663 288 TCPS26B base radio modem, with antenna, software diskette and carrier for instrument 663 289 TCPS26R remote radio modem, with antenna, software diskette and carrier for PC (RS232) 667 085 Transport container for TCPS26 radio modem Configuration with control unit with 1:1 instrument user interface Truly single-operator system Fits to TDA5005 with onboard software (i.e. offline mode) Applied for - Measurement control from point of interest - Large part inspection & assembly 667 380 RCS1100 Standard Set comprising: RCS1100 controller with radio module/antenna, holder, soft bag, user manual, 1 TCPS26B base radio modem, 1 short Y- cable, 1 Lemo 0 - RS232 adapter. Not included: external battery GEB70/71 for TCPS26B, battery GEB111 with charger GKL111 59
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 667 381 RCS1100 Advanced Set comprising: RCS1100 controller with radio module/antenna, holder, user manual, 1 TCPS26B base radio modem, 1 short Y-cable, 1 Lemo 0 - RS232 adapter, 1 GEB 111 battery, 1 GKL 111 charger, 2 Antenna holder, 1 cont Not included: external battery GEB70/71 for TCPS26B Specifications RCS1100 Remore Control Unit Verify with Leica Geosystems Metrology if RCS1100 is approved in your country Method Transmission Frequency spectrum High frequency power (ERP) via integrated Radio Modem 2 447-2 483 MHz adjustable by manufacturer 100 mw Dimensions & Weight Weight w/o battery 0.77 kg Ambient Conditions Operating range Operating temperature Storage temperature Dust/Water (IEC 60529) Humidity up to 600 m (2 000 ft) under average conditions -20 C to + 50 C (-4 F to 122 F) -40 C to + 70 C (-40 F to 158 F) IP54 0-95%, non condensing Std. = Standard delivery Opt. = Option 60
Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Memory Cards and Readers Off-line link via PCMCIA card (DCP05 & Axyz-CDM) 639 948 PCMCIA SRAM memory card, 512 KB (approx. 4,500 data blocks) 639 949 PCMCIA SRAM memory card, 2 MB (approx. 18,000 data blocks) 743 119 MCR6 USB card reader As an alternative, the operator may also transfer data via serial interface using LGO Tools 61
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Accessories, Cables and PC Interfaces Cables On-line link to application PC Configuration for single instrument, powered with internal battery 734 700 Data cable GEV189, 2m, connects instrument with USB for serial communication (incl. USB electronics); PC driver and user manual included on CD 563 625 Data transfer cable GEV102, 2m, connects instrument and RS232 interface 574 948 Data transfer cable 10m, connects instrument and RS232 interface Configuration for single instrument, powered with external battery/mains Std. = Standard delivery Opt. = Option 62
Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 409 684 Y-cable GEV58, long, (Lemo 0, Lemo 0, Lemo 1) connects instrument with external power supply T_LINK/GEV208 or battery GEB70/171 and PC (requires additional connector 707 525) or radio link TCPS26B 707 525 Lemo 0 - RS232 adapter (9pin female) for 409 684 and 707 135 Configuration for multiple instrument, powered with mains 527 497 Data cable GEV86, 20 m, connects instrument with external power supply T-LINK/GEV208 or battery GEB70/171 409 678 Data cable GEV52, 1.8m, connects instrument or intensity regulator DL2 with external power supply T-LINK/GEV208 or battery GEB70/171 575 819 Moxa C104 H/PCI, 4xRS232, for Desktop PC's (for up to 4 instruments online), including RS232 9F gender changer. 800 497 Cable spool for 20m/40m cables Cables - DL2 574 834 Cable, 1m,connects DL2 and intensity regulator 407 678 Cable GEV63, 1.2m, connects instrument with DL2 intensity regulator 63
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Cables - Remote Control System 409 684 Y-cable GEV58, long, (Lemo 0, Lemo 0, Lemo 1) connects instrument with external power supply T_LINK/GEV208 or battery GEB70/171 and PC (requires additional connector 707 525) or radio link TCPS26B 707 135 Y-cable GEV137, short, (Lemo 0, Lemo 0, Lemo 1) connects instrument with external power supply T_LINK/GEV208 or battery GEB70/171 and PC (requires additional connector 707 525) or radio link TCPS26B 707 525 Lemo 0 RS232 adapter (9pin female) for 409 684 and 707 135 Std. = Standard delivery Opt. = Option 64
Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Power Supplies and Batteries Power Supply Units 575 427 Interface T_LINK (max. total 8 instruments) Power supply unit for TPS, for indoor use only. Input 94-265VAC to output 12VDC opt 749 279 GEV208, Power supply unit for TPS/GPS, for indoor use only; input 100-240VAC to output 12VDC, with connection for power cables Batteries 667 123 Camcorder battery GEB121, nickel-metal-hydride (Ni-MH), 6V/4.2Ah (for RCS1100). 667 147 Internal battery GEB187, plug-in, nickel-metal-hydride, (Ni-MH), 1.8Ah. 402 210 Small external battery GEB70, 12V 2Ah NiCd, rechargeable 727 367 External battery GEB171, 12V 8Ah, Ni-MH, rechargeable Battery Chargers 636 983 Charger GKL22, 230V, 50/60Hz, Euro-type plug, charges one battery GEB87, GEB187 or GEB70, normal charge 14 hours 639 959 Simple charger GKL22-1, same as GKL22 but with 115 V, 50/60 Hz, and US -type plug 734 753 GKL112, Charger BASIC, for Ni-MH batteries GEB121 and GEB111, car adapter cable and net adapter included 733 271 GKL221, Charger PRO. To be used with up to two charging adapters GDI221 or GDI222, Charger cable and net adapter included 65
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 733 322 GDI222, Adapter for GKL221 for charging Ni-MH batteries of type GEB121, GEB111,, charger cable included for GEB87, GEB187, GEB77, GEB79, GEB70, GEB71, GEB171 or adapter plate GDI121. Optical Accesories for Instrumental Telescope Internal Targets 433 472 Internal target GUS29 for collimation measurements; factory fit to T3000(A) and TM5100A Eyepieces & Filters 377 802 Eyepiece FOK53, 44x magnification at 10m / 30ft (fitted in service-shop) 743 504 GVO13 objective sun-filter 734 514 GFZ3 Diagonal eyepiece for telescope, except T100 376 236 Eyepiece GOK6 for steep sights up to 72, rotatable in vertical plane 712 504 Counterweight for TM5100(A) and T3000(A) if steep angle eyepiece GOK6 is attached 632 364 GDV3 short range lens for retro targets in container (only replacement, as included in standard delivery of TPS5000 total stations, a re-issue of the certificate M distances is necessary with any new additional lens!) std. std. 575 873 AP31 aperture (diam = 31mm) for use with TDM/TDA5005 and CCR 1.5 (575 875) std. Std. = Standard delivery Opt. = Option 66
Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Autocollimation Accessories 199 899 Autocollimation eyepiece 394 787 Plug-in lamp, with cable to battery. 394 792 Battery box GEB63 for autocollimation eyepiece, without 9V battery 575 725 AL51 plug-in lamp for TM5100A only 392 368 Autocollimation mirror GAS1, ø 50mm, in case 67
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories North Finding Gyroscopes Fully automatic precision surveying gyroscope for north finding measurements Applied for - Precision directional measurements, where GPS is inaccessible e.g. - Naval shipbuilding - Tunnelling - Please ask for separate information on Gyromat 2000 by DMT/Germany Specifications Gyromat 2000 by DMT/Germany Accuracy Measuring mode 1 3 2 Measuring accuracy 3 (1 mgon) 16 (5 mgon) 32 (10 mgon) Measuring time (apx.) 10 min. 5 min. 2 min. No. of measurements 20 30 40 Ambient Conditions Operating range Operating temperature up to 80 latitude -20 C to + 50 C (-4 F to 122 F) Dimensions & Weight Weight w/o instrument Height w/o instrument Tripod 11 kg 215 mm 8 kg 1 000 mm Std. = Standard delivery Opt. = Option 68
Article No. Description Industrial Theodolites & Total Stations Accessories Diode Laser DL2 Visualizes the line-of-sight by truly non contact means Applied for - Marking points - Digitizing - Setting-out points by design values - Positioning and alignment - Locating reflectors in remote control mode Configuration for DL2 & instrument power supply via external battery Configuration for DL2 & instrument power supply via interface T_LINK 69
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 574 822 Diode Laser Eyepiece DL2 with manual, in case Specifications DL2 Diode Laser Pointer Ambient Conditions Operating temperature Storage temperature Humidity -10 C to + 35 C (-14 F to 95 F) -40 C to + 60 C (-40 F to 140 F) 0-95%, non condensing Optic specifications Power output at objective Safety Class 2 Laser Products Eye protection Range on daylight Range in darkness Laser source Wavelength < 1 mw Class 2 Laser Product in accordance with: IEC 60825-1 (2001-08): Safety of Laser Products resp. EN 60825-1: 1994 + A11: 1996 + A2: 2001 Safety of Laser Products Do not stare into the beam or direct it unnecessarily at other persons Integral laser retaining film on beam splitter about 140 m (460 ft) about 400 m (1 300 ft) Laser Diode 635 mm Dimensions Laser eyepiece with housing Intensity regulator Tilt angle of telescope 38 x 58 x 25 mm 98 x 65 x 58 mm depending on instrument type (varies with position of DL2) Weight DL2 Intensity regulator 0.07 kg 0.27 kg Laser Radiation Do not stare into beam Class 2 Laser Product according to IEC Pο 0.95 mw λ = 620-690 nm 723 231 Counterweight for TM5100(A) and T3000(A) if diode laser DL2/3 is attached Std. = Standard delivery Opt. = Option 70
Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 External Intensity Controller for all Types of Instruments 574 835 Intensity regulator 574 834 Cable, 1m, connects DL2 and intensity regulator 407 678 Cable GEV63, 1.2m, connects instrument with DL2 intensity regulator 575 498 Tripod bracket in order to attach accessories (battery, DL2 intensity regulator, Radio Modem) to AT21/28 tripods 409 678 Data cable GEV52, 1.8m, connects instrument or intensity regulator DL2 with external power supply T-LINK/GEV208 or battery GEB70/171 527 497 Data cable GEV86, 20 m, connects instrument with external power supply T-LINK/GEV208 or battery GEB70/171 Internal intensity controller for TDM5005 and TDA5005 only 573 447 Conversion kit DL2 comprising: DM cover (IMS grey) with cable socket and indicating diode, adapter cable between DM - cover and DL2; factory fitted DL2 Compatible Reticules 376 555 Reticule GSTP2 for T2002, TPS100 old, TPS1000, TPS5000 with central opening. Retro fit to TM/TDM/5000, TM/TDM/TDA5005 71
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 575 691 Industrial reticule GSTP24 with concentric circles and central opening for DL2/3; retro fit to T/TC2002, TM/TDM5000 std. std. 575 692 Industrial reticule GSTP25 std. with concentric circles and central opening for DL2/3; retro fit to T3000(A) Std. = Standard delivery Opt. = Option 72
Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Target Equipment Targets for Multi-Theodolites Systems 800 742 Scale bar 0,9m, carbon fibre, incl. Producer Inspection Certificate, in carrying case. 574 681 Orientation Target (magnetic) 571 549 Self-adhesive target foils, black/white, ø 23mm, 48 pieces on one sheet 800 805 Magnetic corner target, ø 30mm, 10mm high Note: By sting a ring shaped target (e.g. 575 271) onto this target, it makes a total station target 73
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories Reflectors for Total Stations 1) Retro-reflective tape targets for industrial applications 2) Prism reflectors for typical survey applications 3) Corner Cube Reflector for precision measurements 4) 360 Reflector for tracking applications Specifications for Reflectors Type Add. Accept. Typ. Typ. Constant Angle Accur. Range Corner Cube Reflector CCR 1.5 35.5 mm 1) Hz ± 10 0.2 mm 2) <600 m (2 000 ft) V ± 20 0.3 mm 4) Tape Targets 20 x 20 mm 34.4 mm 1) ± 42 0.5 mm 2) <60 m (200 ft) 40 x 40 mm 34.4 mm 1) ± 42 0.5 mm 2) 20-120 m (65-400 ft) 60 x 60 mm 34.4 mm 1) ± 42 0.5 mm 2) 60-180 m (200-600 ft) Surveying Prisms Prec. Prism GPH1P 0 mm ± 30 0.3 mm 2) <2 500 m (8 200 ft) Miniprism GMP101 17.5 mm ± 30 0.5 mm <1 000 m (3 300 ft) 360 Prisms GRZ121 23.1 mm Hz 360 2 mm 4) <1 300 m (4 300 ft) V ± 27 Miniprism GRZ101 30.0 mm Hz 360 1.5 mm 4) <500 m (1 650 ft) V ± 27 1) Each TDM5005 and TDA5005 comes with Producer Inspection Certificate (in accordance with ISO17123), that states the individual offset. 2) 1 sigma distance measuring accuracy (in accordance with ISO17123). 3) Under average conditions with a single reflector in manual measurement mode. 4) Point accuracy (1 sigma) Std. = Standard delivery Opt. = Option 74
Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 1) Retro Reflective Tape Targets Inexpensive tape targets available in different design and size Applied for - Standard applications - Manual measurements 574 999 Hidden point bar 0.5m, with tape targets 573 487 Magnetic support for hidden point bar, 0.5m 635 317 Retro targets, 20x20mm, 20 pieces, self-adhesive (avg. range 2-60m) 635 318 Retro targets, 40x40mm, 20 pieces, self-adhesive (avg. range 20-120m) 635 319 Retro targets, 60x60mm, 20 pieces, self-adhesive (avg. range 60-180m) 575 271 Ring shaped retro target, 100 pieces, ø central aperture = 5mm, ø outside = 26mm, light orange, self-adhesive (avg. range up to 50m) 574 998 Target-kit with retro-target on magnetic target, in case, comprising: 20 ring-shaped retro-target, central aperture ø 5mm, outside ø 26mm (575 271), 20x retro-target, 20x20mm (635 317) 20x retro-target, 40x40mm (635 318), 4x RB bases (575 776), 1x RBC base (575 777), 4x RT3-90 targets (575 773), 4x RT3-45 targets (575 774), 4x RT3-0 targets (575 775). 575 088 Pass point-retro target set, in case, comprising: 3 swivel targets with retro reflective foils, ø45mm, h=75mm, 3 magnetic bases 75
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 575 940 Roller Alignment target fixture, comprising 2 pcs. Floor fixtures 1 pce. Roller fixture 2 pcs. RT3-90 targets (575 773), 2 pcs. RT3-45 targets (575 774), excl. CCR1.5 reflector (575 875) and CCR1.5 supports (576076) 575 101 Retro target, magnetic, 10 pcs., format 40x40x1mm, (20-120m). 575 773 RT3-90, Tape target with offset 30mm ± 0.05mm, magnetic. Fits to target base RB and RBC 575 774 RT3-45, Tape target with offset 30mm ±0.05mm, magnetic, fits to target RB and RBC 575 775 RT3-0, Tape target with offset 30mm ±0.05mm, magnetic, fits to target base RB and RBC 575 776 RB, Magnetic target base with offset 10mm ±0.05mm, magnetic, fits to tape targets RT3 Std. = Standard delivery Opt. = Option 76
Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 575 777 RBC, Magnetic target base with offset 10mm ±0.05mm, fits to tape targets RT3, with central bolt hole and locating pin 77
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 2) Prism Reflectors Glass prism targets for surveying applications Available in different size and centring accuracy Applied for - Standard applications with fixed target locations - Automatic measurements - Surveying applications For a wider range of prism supports, please ask your Leica representative or download Catalogue from http://downloads.leica-geosystems.com/ downloads/areas/zz/construction/accessories/index.htm 362 830 Circular prism GPR1 (avg. range up to 2,500m) 362 820 Single prism holder GPH1 for GPR1 641 662 Mini-prism set GMP101 (avg. range up to 1,000m) Set with bubble, spike and bag 555 631 Single prism precision reflector GPH1P (avg. range up to 2500m) Std. = Standard delivery Opt. = Option 78
Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 3) Corner Cube Reflectors Air path corner cube in black (swoxed) spherical housing Replacement program for broken reflectors available Applied for - Precision measurements - Automatic measurements - Fully compatible with Leica Laser Tracker 575 875 Reflector CCR 1.5, swoxed (avg. range up to 600m) For wide range of supports, please consult Laser Tracker section 4) 360 Reflectors Glass prism targets for surveying applications Available in different size and centring accuracy Applied for - Automatic tracking measurements in Step-and-Go mode For a wider range of prism supports, please ask your Leica representative or download Catalogue from http://downloads.leica-geosystems.com/ downloads/areas/zz/construction/accessories/index.htm 667 399 360 prism reflector GZR121 (avg. range up to 1,300m) for typical use with TDA5005 in tracking mode with low accuracy requirements Tribrach 575 459 GDF21-I, industrial tribrach, without optical plummet, light grey 575 733 GDF22-I, industrial tribrach with optical, plummet, light grey 79
Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Aluminum Tripods 575 483 Aluminum tripod AT21, with adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and laser tracker field check equipment.. Instrument height from 1.4 2.1m (4.6 6.9 ft), weight 11kg (24.2 lb) 575 484 Aluminum tripod AT28, with adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and laser tracker field check equipment. Instrument height from 1.4 2.8m (4.6 9.2 ft), weight 12kg (26.4 lb) 575 498 Tripod bracket in order to attach accessories (battery, DL2 intensity regulator, Radio Modem) to AT21/28 tripods. Wooden Tripods 296 632 Tripod GST20, telescopic, with accessories. Robust, well-established tripod for general use. Suitable for levels, lasers, Total Stations and GPS. Extendible 180cm (5.9ft), weight 6.4kg (14.1lb) 332 200 Tripod base GST4, for setting up GST tripods on smooth surfaces Std. = Standard delivery Opt. = Option 80
Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Translation Stages Precision translation stage to shift instrument along axis Applied to - Alignment to references - Alignment of instruments and/or targets 1st GMT5 shifts in single direction; a 2nd translation stage is required for orthogonal shifts 417 677 Measuring slide GMT5 (single direction) with maximum working range 40mm; least count 0.01mm. 417 678 GAD12 Adapter set for mounting GMT5 translation stage onto any Leica tribrach; includes tribrach to mount instrument; typical adapter set for theodolites and total stations. 417 679 GAD13 Adapter set for mounting GMT5 translation stage onto 5/8 thread; includes adapter plate with 5/8 thread to mount instruments; typical adapter set for levels. Meteo Stations & Accessories The most precise sensor to monitor and correct the atmospheric conditions. It is an essential accessory for any precision measurements. 575 734 Set Meteo Station HM30 with integrated pressure sensor, comprising: Meteo Station HM30, RS232 cable, 9pole female, 1.5m. Combo-sensor for humidity/temperature with cable 3m. Power supply 100-240VAC/9VD/1150mA with universal plugs for Europe, UK, USA/Japan For wide range of accessories, please consult Laser Tracker section 81
Whether building the fastest car, the biggest plane, or the most precise tooling, you need exact measurements to improve quality and productivity. So when it has to be right, professionals trust Leica Geosystems Metrology to help collect, analyze, and present 3-dimensional (3D) data for industrial measurement. Leica Geosystems Metrology is best known for its broad array of control and industrial measurement products including laser trackers, Local Positioning Technology (LPT) based systems, hand-held scanners, 3D software and high-precision total stations. Those who use Leica Metrology products every day trust them for their dependability, the value they deliver, and the world-class service & support that's second to none. Precision, reliability and service from Leica Geosystems Metrology. When it has to be right. 2006 Copyright Leica Geosystems AG, Unterentfelden, Switzerland 751789 2.06. Printed in Switzerland. Leica Geosystems AG Moenchmattweg 5 CH-5035 Unterentfelden Switzerland Phone +41 62 737 67 67 info.metrology@leica-geosystems.com www.leica-geosystems.com/metrology - when it has to be right
A technological company - Instop, S.L.U. es desde el año 1997 el proveedor de soluciones globales en el campo de la topografía para todos los profesionales de nuestro país - www.instop.es es el primer portal en la red y la mas completa pagina web dedicada al mundo de la topografía y la construcción - Somos una empresa dinámica dedicada al servicio personalizado al cliente - Instop es el distribuidor mas importante de Leica Geosystems en nuestro país. - Somos la primera empresa del sector en alquiler de maquinaria para topografía. INSTOP S.L.U. C/ Narcís Monturiol, 14 Pol. Ind. Plans d Arau 08787 La Pobla de Claramunt - Barcelona Tel. +34 902 93 02 82 Fax +34 93 805 55 98 www.instop.es