LLB-OCMFM 2000 PORTABLE DOPPLER AREA-VELOCITY FLOWMETER

Transcription

1 LLB-OCMFM 2000 PORTABLE DOPPLER AREA-VELOCITY FLOWMETER System for flow measurement, data acquisition and transmission for wastewater with long battery life With Long Life Battery Open Channel Flow Meter 2000 (LLB-OCMFM2000) BM Tecnologie Industriali developed and introduced in Open Channel Flow Measurement Market a revolutionary ALL IN ONE flow meter. LLB-OCMFM2000 is a double channel area-velocity flow meter that uses doppler wedge or pipe sensors, it has a rechargeable battery LiFePOH4 40 Ah lasting up to 2 months and can be powered by a fixed universal power supply too. It acquires data on an internal 4 Mb memory (266,44 acquisitions) and on an external 4GB pen drive: the acquired data, together with the alarms and the diagnostics can be sent remotely through a built-in GSM / GPRS modem. The IP67 protection grade of the main unit and the IP68 protection grade of the sensors complete the excellent performances of this flow meter. The advanced configuration menu can guide in a few steps, through a display and a keyboard or using software HydroFlux, even a few experienced operator about how to use LLB-OCMFM2000. This device can be used in channel of any shape and dimension thanks to the possibility of interfacing simultaneously to two measuring sensors. By using two sensors, it is also possible to monitor two different channels simultaneously. Analog and Digital inputs complete the features of this excellent measuring device. Via Praimbole LIMENA (PD) Main Features Main Applications Flow, Level, Fluid Temperature measurement Protection IP67 Battery life: up to year, expandable with external battery pack Compact and easy to install Digital and analog input Data acquisition on internal memory and USB Pen Drive Data transmission via GPRS/GSM/SMS to a remote system Software HydroFlux for data management and configuration Measurement in sewer networks Spillway Survey Serach for Extraneous Water Industrial discharge monitoring Calibration of Numerical Models Measurement campaigns on Long and Short Periods in Sewer Basins Stationary Measuring stations if no power supply is available Pumping Station Control Waste Water Treatment Plants Industrial Process Monitoring Monitoring of Irrigation or Drainage channels Tel. +39 (0) Fax +39 (0)

2 Working Principle A beam of ultrasonic waves at F Doppler frequency is sent through the fluid in order to measure its flow rate. The ultrasonic beam is reflected by Doppler frequency F2. The difference between F and F2 frequency is used to determine the velocity of suspended reflecting particles and therefore the velocity of the fluid which flow rate has to be measured. This device determines the Doppler frequency of each single group of reflecting particles by measuring how long the Doppler pulses last. Every frequency is saved (limit value 4 Hz=7mSec. Doppler pulse) in a very short time and a huge number of frequencies are saved in order to create a statistics analysis of frequencies. Values are then examined by a processor in order to calculate the average velocity every 0 seconds. A statistics evaluation of Doppler frequencies uses two table: a table of frequencies and an index table of frequencies. The frequencies range is divided into 72 groups and each group is located in a table. The frequencies ranges start from group zero, including frequencies below 4 Hz, up to group 72, including frequencies above 5000 Hz. As long as the frequencies are saved in the first table, they are saved in the index table too. The index table allows a continuous search of the highest frequency range and its identification. The groups with frequencies closest to the peak values are used to determine the average velocity. The average velocity is used to calculate the instantaneous flow rate. Three different working modes: *Minimum flow rate: if the level is below 6.5 cm, the device does not consider the velocity values, but applies a mathematical hydraulic formula including just the level values to calculate the flow rate. *Standard flow rate/area-velocity: if the level is higher than 6.5 cm, the device considers both velocity and level values to calculate the flow rate. *Maximum flow rate: if the pipe or channel is completely full, the device deletes all the level values it saved and to calculate the flow rate, it uses the maximum level determined by the initial geometrical settings (it considers the biggest pipe/channel section). Via Praimbole LIMENA (PD) Tel. +39 (0) Fax +39 (0)

3 Technical Features I/O Flow sensor inputs Digitals Inputs Analog Inputs Serial port POWER SUPPLY Internal Battery Extern Consumption ACQUISITION DATA MEMORY Flash USB Pen Drive REAL TIME CLOCK Real Time Clock MODEM and SIM CARD Bandwidth Functions ELECTRONIC UNIT Inputs for 2 x Doppler sensors with integrated level measurement 4 opto-isolated digital inputs 0-24V: - alarm input - totalizer input for external pulse flow meter - input for starting acquisition by external event - input for direct transition from intermittent to continuous acquisition analog input 0 0V analog input ma RS232, RS485 ModBus LiFePOH - 40Ah Low tension: 24V AC/DC High tension by AC/DC converter: V AC ~ 60/50Hz Max in transmission: 3,2V Min. in low power 3,2V 4 MB records 4GB Buffered with internal battery QuadBand GSM: 900/800 e 850/900 MHz SMS, GSM, GPRS Standard Compatible with controls AT standard e SIM Holder Antenna DISPLAY e KEYBOARD Number of characters Menu languages No. of keys ENVIRONMENTAL Temperature Protection MECHANICAL Case/Material Size and weight COMPLIANCE STANDARDS Compatibility / Electromagnetic Immunity External access Magnetic base, with,5 m cable 2 lines x 20 digits, Backlit with adjustable contrast Italian and English 2 alphanumeric keys, 8 function keys -0 C ~ +50 C (4 F ~ 04 F) IP67 Black Case - PA66 loaded L430 x P330 x H70 mm - 0 Kg (batteries included) EN : 2005 Via Praimbole LIMENA (PD) Tel. +39 (0) Fax +39 (0)

4 Tecnica Features LLB - OCMFM 2000 Technical Features INSTALLATION Wedge sensors Pipe Sensors Hydraulic conditions MEASURABLE FLUIDS Type Pressure Temperature VELOCITY SENSOR DOPPLER TYPE Frequency Measuring range Precision Drift MEASURING SENSORS Installation on channel bottom. For open channels with regular or irregular shape, small and medium. Insertion sensors. For any type of pipe. The upstream straight section must be greater than 0 diameters, the downstream section should be greater than 5 diameters Water or any fluid chemically compatible with sensors materials. At least 00 ppm, suspended particles > 0,06 mm Max. 4 bar -0 C~ +50 C MHz Long Time Error 0% Material Cable length Protection +/- 6 mt/sec +/- % of read value or +/ mt/sec 00% stable Polyurethane, Stainless Steel.447, Epoxy Standard: 30 mt; On request: up to 00 mt IP68 HYDROSTATIC LEVEL SENSOR BUILT-IN Measuring Range Precision Drift mm.w.c. < 0.5% of measuring range 0.75% of measuring range max. Via Praimbole LIMENA (PD) Tel. +39 (0) Fax +39 (0)

5 Standard Equipment STANDARD EQUIPMENT LLB-OCMFM2000 Quantity Description Code Transit time flowmeter, type: LLB-OCMFM2000 Rechargeable Batteries 40 Ah USB Port - RS232 - Modem GSM/GPRS Internal memory records - analog input - 4 digital inputs Doppler Sensor Wedge type with integrated level measurement, type: KDO-KP L-0 Temp.: C Velocity Range: +/- 6 mt/sec Level Range: mm.w.c. cable length 30 mt - IP68 Mounting collar for wedge sensors type: PCM0-RMS For pipes DN Material: AISI 36 Serial cable RS232, type: CS232-2,5-OCMFM2000 Complete with quick connectors IP68- Length: 2,5 m Junction Box for external power supply and battery charger, type: JB-220/24-OCMFM2000 Complete with quick connectors Cable length: 2 m Switching adjustable power supply, type: LLAS-000-OCMFM2000 With plug connector for Junction Box Battery Charger for LLB-PTTFM2000, type: BCH-40AH-OCMFM2000 Input: 0-240V AC with connector for Junction Box USB Pen Drive case, IP68, type: CPD-USB-OCMFM2000 Material: Black PVC - 2 m outgoing cable with connector IP68 Complete with USB Pen Drive: 4GB Antenna GSM 900/800, magnetic base, type: ABM-,5-OCMFM2000 With,5 m cable and IP68 connector Dehumidification system in silica gel, type: SD-OCMFM2000 USB/RS232 converter, type: IDATA USB-SER-2 With 450mm cable length Universal adapter for plugs, type: SWA00 Configuration and data management Software: HydroFlux User Manual Via Praimbole LIMENA (PD) Tel. +39 (0) Fax +39 (0)

6 Accessories and Spare Parts ACCESSORIES FOR LLB-OCMFM 2000 Description Extra Doppler Sensor Wedge type, with integrated level measurement, type: KDO-KP L-0 Temp.: C Velocity Range: +/- 6 mt/sec Level Range: mm.w.c. cable length 30 mt IP68 Doppler Pipe Sensor Insertion type: KDA-R Temp.: C Velocity Range: +/- 6 mt/sec Dimensions: 35 x 300 mm Fixing ogive with adjustable connection /2G Cable length 20 mt IP68 Extension for pipe sensors, type: EXT-70-NFP / POA Dimensions: 35 x 70 mm Connection PG 3,5 Material: AISI36 Ball valve for pipe sensors, for for on-load tapping, type: B / IM9022 Connections: ½ G F Material: AISI 36 Extra Mounting collar for wedge sensors type: PCM0-RMS For pipes DN Material: AISI 36 Telescopic Rod in aluminium, type: OCP0ZTELESKOP00 Suitable for using the wedge sensors for a short period Max. Extension 5.5 mt External battery 40Ah for LLB-OCMFM 2000, type: EPB-40Ah-OCMFM2000 IP67 Capacity: 40 Ah External battery 80Ah for LLB-OCMFM 2000, type: EPB-80Ah-OCMFM2000 IP67 Capacity: 80 Ah External Modem Dual Band GPRS Cinterion, type: TC35i Including magnetic antenna, power supply 230 VAC/2 VDC 000mA and converter RS232/USB Junction Box for external digital inputs PTTFM2000, type: JB-4DI-OCMFM2000 With 2 mt cable connector Code Absorbent Micro filter with silica gel, type: MFGS-OCMFM2000 USB Pen Drive, type: PM4G-USB-OCMFM2000 Capacity: 4 GB USB Pen Drive holder IP68: MCPD-USB SPARE PARTS FOR LLB-OCMFM 2000 Description Code Via Praimbole LIMENA (PD) Tel. +39 (0) Fax +39 (0)

7 Ordering Code LLB - OCMFM x - x x x x x x x x - x DATA TRANSMISSION GSM-GPRS - USB Pen Drive (standard) BlueTooth (available soon) WI-Fi (available soon) FLOW SENSORS Sensor Wedge type - velocity/ level : KDO-KP L-0 (standard) Sensore 2 Wedge type - velocity/ level : KDO-KP L-0 (optional) Sensore 2 insertion type (pipe sensor) - velocity: KDA-R (optional) CABLE LENGTH 30 m (standard) 0 Enter the number of extensions, 5 mt each OPTIONS Mounting Collar for Sebsor 2 Wedge type PCM0 RMS Extension for Insertion sensor EXT-70-NFP/P0A Ball Valve B/IM9022 Telescopic Rod OCP0ZTELESKOP00 External Battery 40 Ah EPB-40Ah-PTTFM2000 External Battery 80 Ah EPB-80Ah-PTTFM2000 External Modem GSM TC35i Junction Box JB-4DI-PTTFM2000 ANTENNA,5 m cable length (standard) 5 m cable 2 0 m cable 3 5 m cable 4 Via Praimbole LIMENA (PD) Tel. +39 (0) Fax +39 (0)

8 Dimensions LLB-OCMFM mm 330 mm 70 mm Via Praimbole LIMENA (PD) Tel. +39 (0) Fax +39 (0)

9 Dimensions SENSORS Via Praimbole LIMENA (PD) Tel. +39 (0) Fax +39 (0)

10 Software HydroFlux Software Software to manage the data downloaded from LLB-OCMFM 2000 Data displayed in tables and charts. Water Balance for Leak Detection. HydroFlux is a software developed for configuration, download and import of data from LLB-OCMFM2000 and the automatic analysis of flow rate and pressure data. You can create measurement stations to which bind the data downloaded from a LLB-OCMFM2000. It is possible to display the data in tables or charts, for a simultaneous visualization of their trends. Volumes Data Display General description Via Praimbole LIMENA (PD) Tel. +39 (0) Fax +39 (0)