Metrology Products Catalog 2008

Transcription

1 Metrology Products Catalog 2008

2 2

3 Leica Geosystems Metrology Products Catalog 2008

4 Content Leica Geosystems Absolute Trackers 06 Reflector Holders (Hubbs Machines & Manufacturing Inc) 36 Leica Geosystems Laser Tracker Service Contracts 46 Leica Geosystems Industrial Theodolites & Total Stations 50 Leica Geosystems TPS5000 Service Products 73

5 Notes for the Reader 5 Thank you for ordering a copy of the 2008 Leica Geosystems Metrology Products Catalog. This catalog contains the complete range of products and accessories available for Leica Geosystems Absolute Trackers and Leica Geosystems Industrial Theodolites & Total Stations. Regardless of your particular application and the Leica Geosystems Metrology Products you use, we have you covered. Easy-to-interpret diagrams and product illustrations & descriptions let you quickly find what you need for the measurement task at hand. Most items feature a description and a picture. Some items show an example of how to use them in a typical configuration and what benefit they bring. All of our products and accessories offer the same top-notch, no-nonsense design and quality you expect from Leica Geosystems. If you have any questions about our products or accessories, please contact your authorized sales person to receive competent guidance and make an appropriate purchasing decision. Sincerely, Your Leica Geosystems Metrology Products Team

6 6 Content Leica Geosystems Absolute Trackers Basic Instruments Leica Geosystems Absolute Tracker 14 Leica Geosystems Absolute Tracker Controllers 14 Portable CMM Leica T-Probe 15 Accessories 16 Styli & Extensions 17 Leica T-Mac 19 Leica T-Cam with Accessories 20 Leica T-Scan with Accessories 21 Leica Geosystems Absolute Tracker Accessories Laser Tracker Stands 22 Cables & UPS 23 Remote Control Equipment 24 Levelling Equipment 25 Overview Camera Equipment 26 Meteo Station & Accessories 27 Reflectors 28 Leica Reflector Holders 32 Compensation and Field Check Tools 33 Shipping Container and Measuring Cart 35 Reflector Holders (Hubbs Machines & Manufacturing Inc) 36 Legacy Program 44 Leica Geosystems Laser Tracker Service Contracts 46

7 7

8 8 Leica Absolute Tracker Configuration for Standard Tracking Systems U S B A T C ontro lle r

9 9 Pos. Reflectors Reflector Holders and Accessories

10 10 Leica Absolute Tracker Configuration for Probing Systems A T C ontro lle r 90 0 USB

11 11 Pos. Reflectors Reflector Holders and Accessories Leica T-Probe II and Accessories

12 12 Leica Absolute Tracker Configuration for Scanning Systems U S B A T C ontro lle r

13 13 Pos. Reflectors Reflector Holders and Accessories

14 14 Basic Instruments Pos. AT901-B AT901-MR AT901-LR Leica Geosystems Absolute Tracker Leica AT901-LR Absolute Tracker 901-Long Range with Absolute Interferometer (AIFM) (Interferometer = 40 m, ADM 40 m), AT Controller 900, AT Quick Release Mount, shipping container and emscon on-board compensation and open interface software is included. The AT901-LR is compatible with Leica T-Cam LR and other Leica T-Products Leica AT901-MR Absolute Tracker 901-Mid Range with Absolute Interferometer (AIFM) (Interferometer = 25 m, ADM 9 m), AT Controller 900, AT Quick Release Mount, shipping container and emscon on-board compensation and open interface software is included. The Leica AT901-MR is compatible with Leica T-Cam MR and other Leica T-Products Leica AT901-B Absolute Tracker 901-Basic with Absolute Interferometer (AIFM) (Interferometer = 40 m, ADM 40 m), AT Controller 900, AT Quick Release Mount, shipping container and emscon on-board compensation and open interface software is included. Leica Geosystems Absolute Tracker Controller AT Controller 900 The AT Absolute Tracker Controller 900 is compatible with all Leica Geosystems Laser Tracker types except Smart310, LT300/500. For older sensor types the ATC900 will support 3D operations (reflector) only. If Leica T-Products support is required for systems other than from the new AT sensor family then please contact [email protected] std. std. std.

15 Pos. Portable CMM Accessories 15 AT901-MR AT901-B AT901-LR Leica T-Probe 2nd generation Leica T-Probe is a portable CMM solution for armless and wireless probing. The handy and light weight measurement probe with configurable function buttons allows measurements in small and large measurement volumes with minimal preparation time. The measurement range of the Leica T-Probe is up to 15m in all directions. The Leica T-Probe comes with ruby ball stylus d=6mm, Leica T-Probe stylus adaptor, stylus compensation tool, 20m cable, power supply for battery, spare battery and transportation case. L = Set S = System E = Spare part std. = Standard delivery = Option

16 16 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Accessoires Leica T-Probe Styli Kit Recommended stylus kit for Leica T-Probe. Comes with 5 different styli (Scribe stylus r=0.1mm - M2, Ruby ball stylus d=3mm - M5, Ruby ball stylus d=6mm - M5, Ceramic hemispherical stylus d=0.5in - M4, Ceramic hemispherical stylus d=1.0in - M4), 3 styli extensions (100mm - M5 - carbon fibre - stem d=20mm, 200mm - M5 - carbon fibre - stem d=20mm, 40mm - M5 - carbon - stem d=11mm), 2 Leica T-Probe stylus adaptors - M5 with precision quick release for self identification, stylus tools for M2-M3/M4/M5 threaded styli, stylus adaptor M5-M4 and Leica T-Probe styli kit case Leica T-Probe Styli Kit Case for standard configuration (empty) Leica T-Probe stylus adaptor M5 Precision quick release adaptor for Leica T-Probe styli to remove and attach styli without re-calibration. The stylus adaptor has built in intelligence to support stylus self identification Leica T-Probe Holder Optional Leica T-Probe holder for save positioning the Leica T-Probe on workstations and measurements surfaces such as car bodies. 204 opt Cable Leica T-Probe, 10m Cable Leica T-Probe, 20m Leica T-Probe replacement battery 205 opt 206 opt 207 opt Magnetic Leica T-Probe Stylus Compensation Kit Optional for save positioning on magnetic materials to perform stylus compensations T-Probe Stylus Shank Compensation Tool This tool is an accessory for the articles Magnetic T-Probe Stylus Compensation Kit and Leica T-Probe Stylus compensation Kit Stylus Compensation Kit and Leica T-Probe Stylus Compensation Kit

17 Pos. Portable CMM Accessories 17 AT901-MR AT901-B AT901-LR Leica T-Probe Compensation Kit For on-site compensation of Leica T-Probe. It comes with Leica T-Probe reference frame, wedge tool, tripod screw and light duty magnetic holder for 0.5 Red Ring Reflectors. Requires additional 0.5 Red Ring Reflector (corner cube) for compensation process. The Leica T-Probe compensation kit fits into the Leica T-Cam compensation kit shipping container. Styli and Extensions Stylus extension 100mm - M5 - carbon fibre - stem d=20mm Stylus extension 200mm - M5 - carbon fibre - stem d=20mm Stylus extension 400mm - M5 - carbon fibre - stem d=20mm Stylus extension 600mm - M5 - carbon fibre, stem Ø 20mm Stylus extension 40mm - M5 - carbon, stem Ø 11mm Stylus extension 100mm - M5 - carbon, stem Ø 11mm Scribe Stylus r=0.1mm - M Ruby Ball Stylus d=3mm - M Ruby Ball Stylus d=6mm - M Cylindrical Stylus 22.5mm, d=3mm - M Edge Stylus - M5 Comes with edge sphere 0.5, magnetic stylus M5 and compensation sphere 0.5 L = Set S = System E = Spare part std. = Standard delivery = Option

18 18 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Stylus Tool for M2 and M3 threaded styli Stylus Tool for M4 threaded styli Stylus Tool for M5 threaded styli Stylus Adaptor M5 - M Stylus Adaptor M5 - M Stylus Adaptor M4 - M Ceramic Hemispherical Stylus d=0.5in - M4 Ceramic Hemispherical Stylus d=1.0in - M

19 Pos. Portable CMM Accessories 19 AT901-MR AT901-B AT901-LR Leica T-Mac TMC30-B Leica T-Mac basic is a sensor specifically developed to extend the product offerings utilizing the Leica Geosystems 6DOF technology. Leica T-Mac can be used in combination with robots and large machines, especially in high-accuracy positioning applications. Leica T- Mac has can be mounted on a robot or other machines, and its housing already has 4 reflector nests included. These reflector positions can be used to establish a local coordinate system for object orientation or robot alignment. Optionally, a tool exchange interface from Sandvik can be adapted. L = Set S = System E = Spare part std. = Standard delivery = Option

20 20 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Leica T-Cam with Accessories Leica T-Cam LR Leica T-Cam Long Range for up to 15 meter measurement range. It comes with transportation case and cleaning set. Compatible with AT901-LR and LTD800/ Leica T-Cam MR Leica T-Cam Mid Range for up to 9m measurement range. It comes with transportation case and cleaning set. Compatible with Leica AT901-MR and LTD700/ Leica T-Cam Compensation Kit For on-site compensation of Leica T-Cam to Tracker. Requires additional 0.5" Red-Ring Reflector (corner cube) for compensation process. It is recommended to have at least one compensation kit per factory Overview Camera for Leica T-Cam Optional overview camera that can be mounted to Leica T-Cam. It enables save and convenient reflector lock via video image. 224

21 Pos. Portable CMM Accessories 21 AT901-MR AT901-B AT901-LR Leica T-Scan with Accessories Leica T-Scan TS50 Laser Scanner complete - Sensor head with integrated reflectors and connection cable - Transportation Box - Scanner Calibration Files (FD 3.5 ) - Scanner Certifcate - Scanner Cover Laser Power Supply Unit - Separate unit providing power to the Sensor Unit via cables Leica T-Scan Controller Leica T-Scan Interface Kit - Laser Cable (Rack to Laser Power Supply Unit) - Scanner Cable (Rack to Leica T-Scan Controller) - Laser Control Cable (Laser Power Supply Unit - Leica T-Scan Controller) Laser Power Supply Cable (24 Volt) - Trigger Cable (LTC plus to Leica T-Scan Controller) - LED Cable (Rack to Leica T-Scan Controller) - Leica T-Scan Cable (Rack to LTC plus [Probe]) - Sub-D Cable (9-pin, 2 m) - Cross Over Ethernet Cable 1m - Cross Over Ethernet Cable 2 m Leica T-Scan Collect Software Data collection with Leica T-Scan, data collection with Reflector and Leica T-Probe, 3D-Viewer, 2D-Viewer, Profile Viewer, Online-visualisation of measurements, Visualisation of points, meshes or shaded meshes Saving and loading projects, Import and Export 3D-data (points, STL), 3D-transformation of coordinate system alignments, 3D-Filter (Gauss und edge conserving)masking and cutting of 3D-data, 3D-Clipping, Global surface matching of point clouds, 3D-Data reduction (curvature depending or based on volume), Mesh creation, Manipulation of meshes Programmeable and automateable data post processing, Calculation of single and series profiles, Menu to verify accuracy, Menu for calibration, Configurable 2D-gradient filter and optional visualisation of hand scanner High-speed computer for fast data collection and powerful graphical visualization (Pentium 4 Processor with 3.0 GHz, 2 DDRAM 512 MB, Quadro4 Graphics Card) Reference Sphere with certificate Ø 100mm Reference sphere with 100 mm diameter for field check and alignment checks of the Leica T-Scan system Reference Sphere Bar with certificate, 2m Reference bar with 5 spheres at 40cm distance. Each sphere to sphere distance is traceable certified. Diffuse sphere surfaces are special made for scanner measurements. L = Set S = System E = Spare part std. = Standard delivery = Option This accessory is no regular stock item and will be available on customer request only. The typical delivery time is > 3 months.

22 22 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Leica Geosystems Laser Tracker Accessories Following options are compatible with all above listed Leica Geosystems Laser Trackers unless explicitly mentioned Laser Tracker Stands Worlds lightest heavy duty tripod featuring: - Vibration free stand - Light for easy transportation - Large wheels for easy movements - Can be taken apart for transport - Quick release from minutes to seconds AT Stand Extension Base stand extension for AT Absolute Trackers. The AT Stand Extension does not include AT Quick Release Mount, which is required. The AT Stand Extension can be extended either with Stand extension, 380mm (15 ) or Stand extension, 180mm (7 ) Leica Geosystems Laser Tracker Stand The Leica Geosystems Laser Tracker stand is equipped with three levelling screws and shock absorbing wheels AT Quick Release Mount AT Quick release for mounting a AT Absolute Tracker on AT Stand Extension, AT Mounting Plate or any other compatible instrument stand with 3.5 x8 thread adapter AT Mounting Plate Allows to mount the AT Absolute Trackers onto machine beds. The AT Mounting Plate does not include AT Quick Release Mount which is required AT Magnetic Mount Allows to mount the AT Absolute Trackers onto a magnetic surface. The AT Magnetic Mount does not include AT Quick Release Mount and AT Mounting Plate, which is required.

23 Pos. Portable CMM Accessories 23 AT901-MR AT901-B AT901-LR Cables and UPS Industrial cables and Network adapters for LAN as well as UPS units Motor Cable to Leica Geosystems Laser Trackers 10m (33 ) Compatible with any Leica Geosystems Laser Tracker type Sensor Cable to Leica Geosystems Laser Trackers 10m (33 ) Compatible with any Leica Geosystems Laser Tracker type Motor cable to Leica Geosystems Laser Trackers, 5m (16 ) Compatible with any Leica Geosystems Laser Tracker type Sensor Cable to Leica Geosystems Laser Trackers, 5m (16 ) Compatible with any Leica Geosystems Laser Tracker type Elbow Plug set, for motor- and sensor cable, comprising: Elbow Plug, for motor cable, 16 pin Elbow Plug, for sensor cable, 54 pin LAN Cable RJ-45, 5m LAN cable to connenct Laser Tracker with application computer Desktop PC LAN Adapter (10/100 Fast Ethernet PCI adapter, RJ-45 port) Full-duplex operation at both 10 Mbps and 100 Mbps. Comply with PCI Local Bus reversion 2.0/2.1 specification. Support all popular PC network operating systems. Plug and Play Installation, jumper-less board with software configuration program. Single shield RJ45 connector for using at either speed (Category 3, 4, or 5 UTP cable for 10 Mbps Operation, and Category 5 UTP cable for 100 Mbps Operation). Compliant with IEEE BASE-T, IEEE 802.3u 100BASE-TX standards. FCC, CE Certification Wireless Network Adapter for Laptop/Desktop WiFi USB Adapter connects to b/g networks and hotspots. This article is used together with article to establish a network between application computer (Laptop/Desktop) and Laser Tracker (emscon Server). It comes with: USB Adapter for Laptop/Desktop, cradle and instruction sheet. This network configuration (576232/576233) has been tested by Leica Geosystems and ensures system performance. 334 L = Set S = System E = Spare part std. = Standard delivery = Option Wireless Network Adapter for emscon Server WiFi certified Access Point creates high-performance g wireless network. This article is used together with article to establish a network between application computer (Laptop/Desktop) and Leica Geosystems Laser Tracker (emscon Server). It comes with: Access Point for emscon Server, power adapter and instruction sheet. This network configuration (576232/576233) has been tested by Leica Geosystems and ensures system performance.

24 24 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Uninterrupted Power Supply UPS (220 Volt) Power VA/W: 1100/700 Input Voltage Tolerance: 160V/294V adjustable to 150V/294V via supplied UPS-Driver software Frequency: 50/60 HZ Auto-select Output voltage on battery power: 230V (adjustable to 200/220/240V vial supplied UPS-Driver software Dimensions: 44x438x499mm Weight: 16kg Uninterrupted Power Supply UPS (110 Volt) Power VA/W: 1100/700 Input Voltage Tolerance: 92V/138V adjustable to 80V/153V via supplied UPS-Driver software Frequency: 50/60 HZ Auto-select Output voltage on battery power: 120V (adjustable to 100/120/127V vial supplied UPS-Driver software Dimensions: 1.73x17.2x19.6 inch Weight: 35.2 lb 345 Remote Control Equipment Wireless RF Control Approved for: Australia, EU, Czech Republic, Hungary, Malaysia, Mexico, New Zealand, Norway, Philippines, Poland, Russia, Switzerland, Thailand, Hong Kong (Radio Frequency: 40MHz, Range: 30m, plugs into a USB port on a Windows computer) Incl. CD with drivers and templates for Axyz, Metrolog XG and emscon. PCDIMS templates are provide with PCDIMS software CD Wireless IR Control Wireless Infra-Red Control unit for USB port. Compatible with: Windows 98 SE, 2000, ME, XP or higher. Incl. CD with drivers and templates for Axyz, Metrolog XG and emscon. 343

25 Pos. Portable CMM Accessories 25 AT901-MR AT901-B AT901-LR Levelling Equipment High-performing level For measurements against gravity and monitoring stability Ready to measure to specs within minutes (no need for 0-point adjustment) Backward compatibility (except SMART310) NIVEL230, inclination sensor for Laser Tracker with RS232 interface; supports gravity based coordinate measurements, with Producer Inspection. Certificate M NIVEL AT Nivel Adapter Kit The AT Nivel adapter kit is used to mount a Nivel 230 inclination sensor onto the Leica Geosystems AT Laser Tracker to determine the tilt components and to monitor the station Cable, 1.5m (Lemo - Lemo) To connect Leica Geosystems Laser Tracker with NIVEL20 or NIVEL230. L = Set S = System E = Spare part std. = Standard delivery = Option

26 26 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Overview Camera Equipment The unique overview camera allows a quick location of reflectors. While in joystick mode you direct the laser tracker to the point of interest. Thus it becomes an essential accessory for remotely controlled laser trackers Video Cable 10m, BNC / BNC, (AT Controller to View finder video board) Video Grabber DX for Desktop (Axyz only), comprising: 1x Pixel View Model No. PC-CX881P (PCI) 1x Adapter Plug 1x Video cable (10m) 1x Video Grabber Hardware Installation sheet for Axyz Users. For Windows 2000 & Windows XP Video Grabber DX for Notebook (Axyz only), comprising: 1x Notebook Grabber (USB) 1x Adapter plug 1x Video Cable (10m) 1x Video Grabber Hardware Installation sheet for Axyz Users. For Windows 2000 & Windows XP Overview Camera for Leica Geosystems Laser Tracker The optional black/white overview camera mounts on top of the Leica Geosystems Laser Tracker. It enables safe and convenient reflector lock via video image. The camera functionality is supported during the various measuring modes of LTD840, LTD706, LTD709, LTD640, AT901-B, AT901-MR, AT901-LR Laser Trackers, which have the absolute distance meter built in. 365

27 Pos. Portable CMM Accessories 27 AT901-MR AT901-B AT901-LR Meteo Station & Accessories The most precise sensor to monitor and correct the atmospheric conditions. It is an essential accessory for any precision measurements AT MeteoStation The AT MeteoStation has a built-in temperature, humidity and pressure measuring unit. Two external temperature sensors (air temperature/object temperature) can be attached optionally. The meteo station gets connected to the AT Controller via a USB cable. The meteo data is accessible via the emscon Interface. The product consists of: AT MeteoStation, 3m USB cable, HW Manual and Producer Certificate. Parameters: Pressure: min. 500hPa, max. 1100hPa Temperature (int. and ext.): min. -10 C, max.+60 C Rel. Humidity: min. 0%, max. 95% Accuracy: Pressure: ± 1.0 hpa Temperature (int. and ext.) ± 0.3 C Humidity: ± 5% External NTC Temperature Sensor, 2m The external NTC temperature sensor is an accessory for the AT Meteo- Station. The temperature sensor in configured with a 2m cable. It can be used as air- and/or object- sensor. Parameter: Temperature range: C Accuracy: Temperature: ± 0.1 C External NTC Temperature Sensor, 10m The external NTC temperature sensor is an accessory for the AT Meteo- Station. The temperature sensor in configured with a 10m cable. It can be used as air and/or object sensor. Parameter: Temperature range: -20 to +50 C Accuracy: Temperature: ± 0.1 C USB Cable, 3m The USB cable connects the AT MeteoStation with the AT Controller unit AT MeteoStation Calibration Certificate Calibration (DIN ISO 17025) for the AT MeteoStation together with 2 external sensors (if available). The certificate issues: - Rel. Humidity: 50% - Temperature (int./ext.): +20 C (ext.: Possible only when external sensors are available) - Pressure: 700mb to 1200mb L = Set S = System E = Spare part std. = Standard delivery = Option AT MeteoStation Producer Certificate Producer Certificate (DIN ISO 9001) for the AT MeteoStation together with 2 external sensors (if available). The certificate issues: - Rel. Humidity: 53% - Temperature (int./ext.): +20 C (ext.: Possible only when external sensors are available) - Pressure: actual atmosphere

28 28 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Reflectors The widest range of offering for most various applications. All reflectors are optimized for use with Leica Geosystems Laser Tracker: Each Corner Cube reflector is coated to assure the world s best ADM specifications. Applied for: - Standard applications - Dynamic and static measurements Break Resistant Reflector 1.5 (BRR) Break Resistant Reflector with collar, protection cover for optic and certificate, in wooden box Radius: mm ± mm ( in ± in) Centring of optics: < ± mm (< ± in) Shape ball: < ± mm (< ± in) Acceptance angle: ± 30, No limitation due to collar Ball material: Stainless steel, surface-hardened, magnetic Weight: 195 g (6.88 oz) Break Resistant Reflector 0.5 (BRR) Break Resistant Reflector with collar, protection cover for optic and certificate, in wooden box Radius: 6.35 mm ± mm ( in ± in) Centring of optics: < ± mm (< ± in) Shape ball: < ± mm (< ± in) Acceptance angle: ± 30, No limitation due to collar Ball material: Stainless steel, surface-hardened, magnetic Weight: 7 g (0.25 oz) Red-Ring Reflector (RRR) 1.5, ball with hardened steel surface Corner cube reflector with removable ring, protection cover for optic and certificate, in wooden box Radius 0.75 (19.05mm) ±0.0025mm, Centring of optics ±0.006mm Shape ball ±0.0015mm Acceptance angle ±30 Weight 170g Red-Ring Reflector 1.5 (RRR), 2-pack 2 Corner Cube reflectors with removable ring, protection cover for optic and certificate, in wooden box. Radius: mm ± mm ( in ± in) Centring of optics: < ± mm (< ± in) Shape ball: < ± mm (< ± in) Acceptance angle: ± 30, No limitation due to ring Ball material: Stainless steel, surface-hardened, magnetic Weight: 170 g (6.00 oz) 501

29 Pos. Portable CMM Accessories 29 AT901-MR AT901-B AT901-LR Red-Ring Reflector 1.5 (RRR), 5-pack 5 Corner Cube reflectors with removable ring, protection cover for optic and certificate, in storage case. Radius: mm ± mm ( in ± in) Centring of optics: < ± mm (< ± in) Shape ball: < ± mm (< ± in) Acceptance angle: ± 30, No limitation due to ring Ball material: Stainless steel, surface-hardened, magnetic Weight: 170 g (6.00 oz) Red-Ring Reflector 1.5 (RRR), 10-pack 10 Corner Cube reflectors with removable ring, protection cover for optic and certificate, in storage case. Radius: mm ± mm ( in ± in) Centring of optics: < ± mm (< ± in) Shape ball: < ± mm (< ± in) Acceptance angle: ± 30, No limitation due to ring Ball material: Stainless steel, surface-hardened, magnetic Weight: 170 g (6.00 oz) Applied for: - Standard applications - Dynamic and static measurements Red-Ring Reflector (RRR) 0.5, ball with hardened steel surface Corner cube reflector with removable ring, protection cover for optic and certificate, in wooden box Radius 0.25 (6.35mm) ±0.0025mm, Centring of optics ±0.006mm Shape ball ±0.0015mm Acceptance angle ± 30 Weight 5g Red-Ring Reflector 0.5 (RRR), 2-pack 2 Corner Cube reflectors with removable ring, protection cover for optic and certificate, in wooden box Radius: 6.35 mm ± mm ( in ± in) Centring of optics: < ± mm (< ± in) Shape ball: < ± mm (< ± in) Acceptance angle: ± 30, No limitation due to ring Ball material: Stainless steel, surface-hardened, magnetic Weight: 6 g (0.21 oz) 502 L = Set S = System E = Spare part std. = Standard delivery = Option Red-Ring Reflector 0.5 (RRR), 5-pack 5 Corner Cube reflectors with removable ring, protection cover for optic and certificate, in wooden box Radius: 6.35 mm ± mm ( in ± in) Centring of optics: < ± mm (< ± in) Shape ball: < ± mm (< ± in) Acceptance angle: ± 30, No limitation due to ring Ball material: Stainless steel, surface-hardened, magnetic Weight: 6 g (0.21 oz)

30 30 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Red-Ring Reflector 0.5 (RRR), 10-pack 10 Corner Cube reflectors with removable ring, protection cover for optic and certificate, in wooden box Radius: 6.35 mm ± mm ( in ± in) Centring of optics: < ± mm (< ± in) Shape ball: < ± mm (< ± in) Acceptance angle: ± 30, No limitation due to ring Ball material: Stainless steel, surface-hardened, magnetic Weight: 6 g (0.21 oz) Applied for: - Standard applications - Automated inspection Tooling Ball Reflector 0.5 (TBR) Tooling ball glass prism reflector with removable ring, protection cover for optic and certificate, in wooden box Radius ball: 6.35 mm: ± mm ( in ± in) Centring of optics: < ± 0.01 mm (< ± in) Shape ball: < ± mm (< ± in) Acceptance angle: with ring: ± 22, without ring: ± 50 Ball material: Stainless steel, surface-hardened, magnetic Weight: 7 g (0.25 oz) Tooling Ball Reflector 0.5 (TBR), 5-pack 5 Tooling ball glass prism reflector with removable ring, protection cover for optic and certificate, in wooden box Radius ball: 6.35 mm: ± mm ( in ± in) Centring of optics: < ± 0.01 mm (< ± in) Shape ball: < ± mm (< ± in) Acceptance angle: with ring: ± 22, without ring: ± 50 Ball material: Stainless steel, surface-hardened, magnetic Weight: 7 g (0.25 oz) Tooling Ball Reflector 0.5 (TBR), 10-pack 10 Tooling ball glass prism reflector with removable ring, protection cover for optic and certificate, in wooden box Radius ball: 6.35 mm: ± mm ( in ± in) Centring of optics: < ± 0.01 mm (< ± in) Shape ball: < ± mm (< ± in) Acceptance angle: with ring: ± 22, without ring: ± 50 Ball material: Stainless steel, surface-hardened, magnetic Weight: 7 g (0.25 oz) Applied for: - Monitoring fixed installations - Repeatability tests - Relative measurements - Deformation measurements 503

31 Pos. Portable CMM Accessories 31 AT901-MR AT901-B AT901-LR Reflectors for fixed installation (RFI) 0.5, set of 5 pcs., ball with anodized aluminium surface ø 0.5 (12.07mm) Max. acceptance angle ±50 Weight 5g Reflector for Fixed Installations 0.5 (RFI), 10-pack 10 Tooling ball glass prism reflector in wooden box. Radius ball: 6.35 mm ( in) Centring of optics: not applicable Shape ball: not applicable Acceptance angle: ± 50 Ball material: Anodized aluminum, non-magnetic Weight: 3 g (0.11 oz) Applied for: - Robot and machine operations - Dynamic and static measurements Cateye Reflector (CER), ball with hardened steel surface, ø 75mm ( ), ±0.05mm Ball shape ±0.01mm Centring of optics ±0.01mm Max. acceptance angle ±60 Weight 730g Applied for: - Robot and machine operations - Dynamic and static measurements Surface Reflector Kit including: - Surface Reflector with lanyard - Pin Point Stylus - 3 mm Ruby Ball Stylus - Edge Stylus - Initialisation sphere - Manual L = Set S = System E = Spare part std. = Standard delivery = Option

32 32 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Reflectors Holders Starter bolt for tooling ball reflector Sphere fit tool for Cateye reflector Light Duty Magnetic Holder for tooling ball reflectors 0.5

33 Pos. Portable CMM Accessories 33 AT901-MR AT901-B AT901-LR Compensation and Field Check Tools A regular field check plus compensation will keep your system in a perfect condition and will provide a performance to specification Compensation Set for 75mm Reflectors (Cateye), comprising: Precision ball bar, motorized, 2x Magnetic Reflector Support Adapter to ball bar Compensation Set for 1.5 Red Ring Reflectors (Corner cube) Comprising: Precision ball bar, motorized, 2x Magnetic reflector Support, Adapter to ball bar Precision Ball Bar Motorized, with counter weight, without reflector support Adapter to Ball Bar for Tripods with 5/8 Thread Allows to mount a ball bar and a magnetic reflector carrier on a tripod, (ball bar and reflector carrier are not included) IFM Distance Tool To re-determine the birdbath distance for TBR and 1.5 CCR reflectors, 12mm bore holes for reflector supports (supports not included) Tripod Adapter To be used for various alignment or compensation measurements. Thread for tripod 5/8. Bore hole 12mm (supports not included) - Tripod reflector holder for consistent reference point - Drawn to scale - Steel with black oxide finish Aluminium Tripod AT28 With adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and Laser Tracker field check equipment. Instrument height from m ( ft), weight 12kg (26.4 lb) Aluminium Tripod AT21 With adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and Laser Tracker field check equipment. Instrument height from m ( ft), weight 11kg (24.2 lb) L = Set S = System E = Spare part std. = Standard delivery = Option

34 34 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Reference Tool Invar Magnetic Reflector Holder for reflectors in spherical housings ø 1.5 with bolt hole for Magnetic Reflector Holder for reflectors in spherical housings ø 75mm with bolt hole for and Tripod reflector holder for consistent reference point - Drawn to scale - Steel with black oxide finish Mirror Tool to measure distances between 2 points with Laser Tracker using interferometer only. This basic set includes 2 holders with reflector holders for 0.5 and 1.5 (2 units each version and ) This tool can be used also to generate nominal distance values for the planned VDI/VDE standard Reflector Mount Can be mounted on a tripod or fix installed at a stabil location to establish nominal distances for comparison measurements. To support 0.5 and 1.5 CCR s magnetic reflector holders version and are recommended.

35 Pos. Portable CMM Accessories 35 AT901-MR AT901-B AT901-LR Shipping Container and Measuring Cart Both carts and shipping container will provide best storage and transport facilities Measurement Cart rack mounting for a fix installation of controllers,ups and high speed computer. This cart can be used like the regular measuring cart and in addition it can be reconfigured to shuttle cart. L =1.20m, W = 0.70m, H = 1.10m Leica T-Scan Measuring Cart (rack-size) Small 19 rack with wheels, 18 HE height to mount: LTC plus, Cover plate for cable connection, Laser power supply, Leica T-Scan Controller, High speed computer and UPS. L=0.59m, W=0.755m, H=0.845m Shipping Case for Stand and AT Stand Extension The case can be equipped with Leica Geosystems LaserTracker Stand, AT Stand Extension and the Leica Geosystems Laser Tracker Motor & Sensor and Cables (5m or 10m) Rack Mount Light Duty Case The case is a light duty rolling rack unit. It has dual lids and rollerblade type wheels. The rack mount light duty case is versatile and can be equipped with e.g. a AT Controller900 or T-Scan Controller or any other computer equipment, which fits the 4 unit height and 19 width rack system. Exterior Depth: in / cm Exterior Width: in / cm Exterior Height: in / cm Rack Space Units: 4 U Rack Depth (Rail to Lid): in / cm Rack Depth (Rail to Rail): in / cm Lid Depth: 2.25 in / cm Product Weight: 17 lb / kg L = Set S = System E = Spare part std. = Standard delivery = Option

36 36 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Leica Geosystems Laser Tracker 1.5 Reflector Holders Reflector Holder 1.5, offset 24mm, shank Ø 6mm, body Ø 25.4mm, stainless steel Reflector Holder 1.5, offset 24mm, shank Ø 8mm, body Ø 25.4mm, stainless steel Reflector Holder 1.5, offset 24mm, shank Ø 12mm, body Ø 25.4mm, stainless steel Reflector Holder 1.5, offset 25mm, shank Ø 6mm, body Ø 25.4mm, stainless steel Reflector Holder 1.5, offset 25mm, shank Ø 8mm, body Ø 25.4mm, stainless steel Reflector Holder 1.5, offset 25mm, shank Ø 10mm, body Ø 25.4mm, stainless steel Reflector Holder 1.5, offset 25mm, shank Ø 12mm, body Ø 25.4mm, stainless steel Reflector Holder 1.5, offset , shank Ø , body Ø 1.000, stainless steel 1.000"(25.4MM) 3 Point Nest Sphere (Reference) A B

37 Pos. Portable CMM Accessories 37 AT901-MR AT901-B AT901-LR Reflector Holder 1.5, offset 24mm, shankless, body Ø 40.64mm, stainless steel Reflector Holder 1.5, offset 25mm, shankless, body Ø 40.64mm, stainless steel Reflector Holder 1.5, offset , shankless, body Ø , stainless steel Reflector Holder 1.5, offset 24mm, shankless, body Ø 40.64mm, magnetic base, stainless steel Reflector Holder 1.5, offset 25mm, shankless, body Ø 40.64mm, magnetic base, stainless steel Reflector Holder 1.5, offset , shankless, body Ø , magnetic base, stainless steel 3 Point Nest Diameter (40.64 MM) Sphere (Reference) A Edge Reflector Holder 1.5, offset 24mm, stainless steel Edge Reflector Holder 1.5, offset 25mm, stainless steel Edge Reflector Holder 1.5, offset , stainless steel Centerline of Precision (3) Point Nest in Line with Datum "A" W/in +/ Reflector Holders Please send orders to: Hubbs Machine & Manufacturing Inc Rocky Grove Datum "A" P.O. Box 540 Cedar Hill, Missouri USA Tel.: L = Set S = System E = Spare part std. = Standard delivery = Option Offset Diameter Sphere (Reference) Magnet Fax: [email protected]

38 38 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Drift Nest 1.5, offset , aluminum 3 Point Nest Sphere (Reference) ( Reference) Magnet 45 Degree Chamfer Foundation Reflector Holder Point Nest Diameter (Reference) Magnet Removable Brass Cap with O-Ring Seal Medium Knurl Tripod Reflector Holder Point Nest Sphere (Reference) Magnet 1/4" Hole 5/8-11

39 Pos. Portable CMM Accessories 39 AT901-MR AT901-B AT901-LR Leica Lanyard Set 1 (full) Leica Lanyard Set 2 (partial) Leica Geosystems Laser Tracker 0.5 Reflector Holders Reflector Holder 0.5, offset 10mm, shank Ø 5mm, body Ø 12.7mm, stainless steel Reflector Holder 0.5, offset 10mm, shank Ø 6mm, body Ø 12.7mm, stainless steel Reflector Holder 0.5, offset 10mm, shank Ø 8mm, body Ø 12.7mm, stainless steel Reflector Holder 0.5, offset 10mm, shank Ø 10mm, body Ø 0.75, stainless steel Reflector Holder 0.5, offset 10mm, shank Ø 12mm, body Ø 0.75, stainless steel Reflector Holder 0.5, offset 12mm, shank Ø 6mm, body Ø 12.7mm, stainless steel Reflector Holder 0.5, offset 12mm, shank Ø 8mm, body Ø 12.7mm, stainless steel Reflector Holder 0.5, offset 12mm, shank Ø 12mm, body Ø 0.75, stainless steel Reflector Holder 0.5, offset mm, shank Ø , body Ø , stainless steel Reflector Holder 0.5, offset mm, shank Ø , body Ø , stainless steel Reflector Holders C Please send orders to: Hubbs Machine & Manufacturing Inc. A.500 Sphere (Reference) 6282 Rocky Grove P.O. Box 540 Cedar Hill, Missouri USA Tel.: Fax: L = Set S = System E = Spare part std. = Standard delivery = Option B [email protected]

40 40 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Reflector Holder 0.5, offset 10mm, body Ø 12.7mm, shankless, magnetic base, stainless steel Reflector Holder 0.5, Offset 12mm, body Ø 12.7mm, shankless, magnetic base, stainless steel Reflector Holder 0.5, offset , body Ø , shankless, magnetic base, stainless steel.5000+/-.0005" (12.7 MM).500 Diameter Sphere (Reference) on Centerline within +/-.0005" A Magnets Reflector Holder 0.5 Drift Nest, offset , stainless steel.500 Diameter Sphere (Reference).500 +/-.010 Magnet Reflector Holder 0.5 Target Corner, offset , stainless steel Datum "A".5000 Diameter Sphere (Reference) / Magnet Magnet Sphere Reference in line with datum "A" w/in +/-.0005

41 Pos. Portable CMM Accessories 41 AT901-MR AT901-B AT901-LR Magnetic Holder with zero thickness for 0.5 reflectors, steel black oxide finish.500 Sphere (Reference) Magnet Double Vector for TBR, shank Ø , steel black oxide finish.500 Sphere (Reference) 2 Places Heavy Duty Magnetic Holder for TBR.500 Sphere (Reference) Reflector Holders Please send orders to: Hubbs Machine & Manufacturing Inc Rocky Grove P.O. Box 540 Cedar Hill, Missouri USA Tel.: Fax: L = Set S = System E = Spare part std. = Standard delivery = Option [email protected]

42 42 Portable CMM Accessories Pos. AT901-B AT901-MR AT901-LR Miscellaneous Heavy Duty Magnetic Reflector Holder Adaptor, aluminum Slip Fit For 12 MM 36 MM Magnet Foundation Target Insert Medium Knurl 1.0" OD Air Hole.2500 Hole Slip Fit Cap Brass Leica Geosystems Laser Tracker Imperial Reflector Holder Kit consisting of: - 6 x Reflector Holder 0.5 Drift Nest, offset , stainless steel - 1 x Reflector Holder 0.5 Target Corner, offset , stainless steel - 1 x Reflector Holder 0.5, offset mm, shank Ø , body Ø , stainless steel - 1 x Double Vector for TBR, shank Ø , steel black oxide finish - 1 x Reflector Holder 1.5, offset , shank Ø , body Ø 1.000, stainless steel - 1 x Reflector Holder 1.5, offset , shankless, body Ø , stainless steel - 1 x Edge Reflector Holder 1.5, offset , stainless steel - 2 x Tripod Reflector Holder x Drift Nest 1.5, offset , aluminum

43 Pos. Portable CMM Accessories 43 AT901-MR AT901-B AT901-LR Leica Geosystems Laser Tracker Metric Reflector Holder Kit consisting of: - 6 x Reflector Holder 0.5 Drift Nest, offset , stainless steel - 1 x Reflector Holder 0.5, offset 10mm, shank Ø 6mm, body Ø 12.7mm, stainless steel - 1 x Reflector Holder 0.5, offset 10mm, shank Ø 8mm, body Ø 12.7mm, stainless steel - 1 x Reflector Holder 0.5, offset 10mm, shank Ø 12mm, body Ø 0.75, stainless steel - 1 x Reflector Holder 0.5, offset 12mm, shank Ø 6mm, body Ø 12.7mm, stainless steel - 1 x Reflector Holder 0.5, offset 12mm, shank Ø 8mm, body Ø 12.7mm, stainless steel - 1 x Reflector Holder 0.5, offset 12mm, shank Ø 12mm, body Ø 0.75, stainless steel - 1 x Reflector Holder 1.5, offset 25mm, shank Ø 6mm, body Ø 25.4mm, stainless steel - 1 x Reflector Holder 1.5, offset 25mm, shank Ø 8mm, body Ø 25.4mm, stainless steel - 1 x Reflector Holder 1.5, offset 25mm, shank Ø 12mm, body Ø 25.4mm, stainless steel - 1 x Reflector Holder 1.5, offset 25mm, shankless, body Ø 40.64mm, stainless steel - 1 x Edge Reflector Holder 1.5, offset 25mm, stainless steel - 2 x Tripod Reflector Holder x Drift Nest 1.5, offset , aluminum Leica Stand Adaptor Rings Clearanc Bolt Holes for Leica Laser Tracker Head 3 1/2-8 Thread Tapped Holes for Leica tracker Base Reflector Holders Please send orders to: Hubbs Machine & Manufacturing Inc Rocky Grove P.O. Box 540 Cedar Hill, Missouri USA Tel.: Fax: L = Set S = System E = Spare part std. = Standard delivery = Option [email protected]

44 44 Legacy Program Pos. LTD640 LTD706/709 LTD840 For Leica Geosystems Laser Tracker 600/640/700/706/709/800/840 Series Laser Tracker Stands Stand extension, 380mm (15 ) Stand extension for Laser Tracker sensor Stand extension, 180mm (7 ) Stand extension for Leica Geosystems Laser Tracker sensor Mounting plate for Leica Geosystems Laser Tracker Allows to mount the sensor unit onto machine beds etc., requires part number Leica T-Cam Accessories Cable Leica T-Cam, 10m Cable Leica T-Cam, 5m Spare or replacement cable for Leica T-Cam Sync Package for LTCbase / plus Required for Leica T-Cam but also enables synchronization and trigger with external devices. Required for upgrades and for Laser Tracker s delivered before Jan 2005 only. 222 std. std. Levelling Equipment NIVEL Adapter Kit The NIVEL adapter kit is used to mount all NIVEL inclination sensor onto the Leica Geosystems Laser Tracker, compatible with LT(D)640, LTD706, LTD709, LTD

45 Legacy Program 45 LTD706/709 LTD640 Pos. LTD840 For Leica Geosystems Laser Tracker 600/640700/706/709/800/840 Series Meteo Station HM30 Factory Certification Factory Certification for HM30, together with combo-sensor. Certificate issued for humidity, temperature and pressure to the producer s standards, performed by Revue Thommen in Switzerland. To be ordered at your local service centre (or check local possibilities). Shipping Container and Measuring Cart Shipping container for Leica Geosystems Laser Tracker accessories For Leica Geosystems Laser Tracker with LTC base/plus as LTD600, 700, Optional upgrade of measuring cart to use with Leica T-Scan system. The measuring cart have to be upgraded when it will be used with Leica T-Scan system - Ventilator to cool the cart - Cover plate with integrated plugs - Adapter to mount Laser Power Supply Unit L = Set S = System E = Spare part std. = Standard delivery = Option

46 46 Leica Geosystems Laser Tracker Service Contracts Pos. AT901-B AT901-MR AT901-LR Year Warranty Program for Leica Geosystems Laser Tracker A yearly scheduled inspection Traceable re-certification to national standard All parts and labor for repairs (excluding all cables application computers, software and other peripheral hardware) Year Warranty Program for Leica T-Cam and Leica T-Probe Comprises: A yearly scheduled inspection Traceable re-certification to national standard All parts and labor for repairs (excluding all cables application computers, software and other peripheral hardware) Year Warranty Program for Leica T-Scan, Leica T-Cam and Leica T-Probe Comprises: A yearly scheduled inspection Traceable re-certification to national standard All parts and labor for repairs (excluding all cables application computers, software and other peripheral hardware) Gold Contract for Leica Geosystems Laser Tracker Comprises: A fully comprehensive contract, that allows easy budgeting and guaranties that your system is in optimal shape. It includes: A system check A yearly scheduled maintenance Traceable re-certification to national standard All parts and labor for repairs Application and technical telephone support Firmware revision upgrades If Customer prefers the re-certification on-site, maintenance is limited to basic system check Gold Contract for Leica T-Cam and Leica T-Probe Comprises: A fully comprehensive contract, that allows easy budgeting and guaranties that your system is in optimal shape. It includes: A system check A yearly scheduled maintenance Traceable re-certification to national standard All parts and labor for repairs Application and technical telephone support Firmware revision upgrades If Customer prefers the re-certification on-site, maintenance is limited to basic system check Gold Contract for Leica T-Scan, Leica T-Cam and Leica T-Probe Comprises: A fully comprehensive contract, that allows easy budgeting and guaranties that your system is in optimal shape. It includes: A system check A yearly scheduled maintenance Traceable re-certification to national standard All parts and labor for repairs Application and technical telephone support Firmware revision upgrades If Customer prefers the re-certification on-site, maintenance is limited to basic system check

47 Pos. Leica Geosystems Laser Tracker Service Contracts 47 AT901-MR AT901-B AT901-LR Silver Contract for Leica Geosystems Laser Tracker A system check A yearly scheduled maintenance Traceable re-certification to national standard or accuracy measurements, confirmed with an Accuracy Statement Application and technical telephone support Firmware revision upgrades A system status report If Customer prefers the re-certification on-site, maintenance is limited to basic system check. Parts & labor for repairs excluded Silver Contract for Leica T-Cam and Leica T-Probe A system check A yearly scheduled maintenance Traceable re-certification to national standard or accuracy measurements, confirmed with an Accuracy Statement Application and technical telephone support Firmware revision upgrades A system status report If Customer prefers the re-certification on-site, maintenance is limited to basic system check. Parts & labor for repairs excluded Silver Contract for Leica T-Scan. Leica T-Cam and Leica T-Probe Comprises: A system check A yearly scheduled maintenance Traceable re-certification to national standard or accuracy measurements, confirmed with an Accuracy Statement Application and technical telephone support Firmware revision upgrades A system status report If Customer prefers the re-certification on-site, maintenance is limited to basic system check. Parts & labor for repairs excluded On-site services available for all contracts in all EU countries, Switzerland & China. On-site service work charged at a flat rate. Remark: Includes travelling hours and travelling expenses. Only applicable for countries mentioned above Stand-by System Option for Leica Geosystems Laser Tracker Guaranteed availablability whilst your instrument is in service. System comprises of Sensor, LT Controller, cables and/or Leica T-Cam with Leica T-Probe. Available within 24 hours (excluding weekends, public holidays, excluding time for shipment customs clearance) after fault diagnosis or upon request prior to maintenance or re-certification Stand-by System Option Leica T-Cam and Leica T-Probe Guaranteed availablability whilst your instrument is in service. System comprises of Sensor, LT Controller, cables and/or Leica T-Cam with Leica T-Probe. Available within 24 hours (excluding weekends, public holidays, excluding time for shipment customs clearance) after fault diagnosis or upon request prior to maintenance or re-certification. L = Set S = System E = Spare part std. = Standard delivery = Option

48 48 Leica Geosystems Laser Tracker Service Contracts Pos. AT901-B AT901-MR AT901-LR Maintenance & Re-certification for Leica Geosystems Laser Tracker Duration: 2 working days. Comprises: A Maintenance Tracker compensation and, if applicable, a Leica T-Cam-to-tracker compensation Traceable re-certification to national standard or Accuracy measurements confirmed with Leica Geosystems Accuracy Statement A system status report Maintenance & Re-certification for Leica T-Cam and Leica T-Probe Duration: 2 working days. Comprises: A Maintenance Tracker compensation and, if applicable, a Leica T-Cam-to-tracker compensation Traceable re-certification to national standard or Accuracy measurements confirmed with Leica Geosystems Accuracy Statement A system status report Maintenance & Re-certification for Leica T-Cam, Leica T-Probe, Leica T-Scan Duration: 2 working days. Comprises: A Maintenance Tracker compensation and, if applicable, a Leica T-Cam-to-tracker compensation Traceable re-certification to national standard or Accuracy measurements confirmed with Leica Geosystems Accuracy Statement A system status report On-site Re-certification for Leica Geosystems Laser Tracker Duration: 1 working day. Comprises: A system check Tracker compensation and, if applicable a Leica T-Cam-to-tracker compensation Traceable re-certification to national standard or Accuracy measurements confirmed with Leica Geosystems Accuracy Statement Excluding travel expenses and travelling hours On-site Re-certification for Leica T-Cam & T-Probe Duration: 1 working day. Comprises: A system check Tracker compensation and, if applicable a Leica T-Cam-to-tracker compensation Traceable re-certification to national standard or Accuracy measurements confirmed with Leica Geosystems Accuracy Statement Excluding travel expenses and travelling hours On-site Re-certification for Leica T-Cam, Leica T-Probe and Leica T-Scan Duration: 1 working day. Comprises: A system check Tracker compensation and, if applicable a Leica T-Cam-to-tracker compensation Traceable re-certification to national standard or Accuracy measurements confirmed with Leica Geosystems Accuracy Statement Excluding travel expenses and travelling hours Extended Maintenance for Leica Geosystems Laser Tracker Comprises: Extended Maintenance includes full factory maintenance and inspection, an extended system function check, cleaning and touch-up and tuning of the instrument, firmware upgrades. An extended status report and a certificate traceable to national standard is issued. Carried out exclusively at Leica Geosystems Laser Tracker Service Center in Switzerland. Duration: 5 working days after reception of the goods.

49 Pos. Leica Geosystems Laser Tracker Services 49 AT901-MR AT901-B AT901-LR Rental System Leica Geosystems Laser Tracker Rental System Leica Geosystems Laser Tracker incl. Leica T-Cam and Leica T-Probe On weekly basis and subject to availability. On-site services available for all contracts in all EU countries, Switzerland & China Repairs: Re-certification and/or maintenance work does not include repair. If repairs are necessary, the Customer will be notified and informed of the estimated costs (labor and parts) and of necessary repair time, including shipment. Repairs are only carried out after written approval of the repair estimate. Shipment of systems to the designated Leica Geosystems Service Center and return to the Customer is at Customer s expense & sole risk. Planning: At least 4 weeks in advance, Leica Geosystems & Customer agree in writing on an appropriate date for carrying out the services. General Terms and Conditions for the Maintenance and/or Support by Metrology Division of Leica Geosystems apply for all services & contracts. L = Set S = System E = Spare part std. = Standard delivery = Option

50 50 Content Leica Geosystems Industrial Theodolites and Total Stations Basic Instruments Leica Geosystems Industrial Total Stations 52 Leica Geosystems Industrial Theodolite 52 Onboard Software 53 Producer Inspection Certificates 53 Manuals 54 Accessories Remote Control System RCS 55 Memory Cards and Readers 55 Cables and PC-Interfaces 56 Power Supply 58 Batteries & Chargers 59 Optical Accessories for Instrument Telescope 60 Adapter Plate for TM5100A 60 Internal Targets 60 Eyepieces & Filters 60 Autocollimation Accessories 61 Diode Laser DL2 62 External Intensity Controller for all Types of Instruments 63 Internal intensity controller for TDM5005 and TDA5005 only 64 DL2 Compatible Reticules 64 North-Finding Gyroscopes 64 Target Equipment 65 Targets for Multi-Theodolites Systems 65 Reflectors for Total Stations 65 1) Retro reflective tape targets 66 2) Prism Reflectors 68 3) Corner Cube Reflectors 68 4) 360 Reflectors 69 Tripods and Centring Devices 69 Tribrach 69 Aluminium Tripods 69 Wooden Tripods 70 Translation Stages 70 NIVEL230 for levelling 71 Comprehensive Service Contracts 72 Maintenance 73 Re-certification 73 Extended Warranty 74 Stand-by Units 74 CCR Replacement 74

51 51

52 52 Basic Instruments TM5100A TDM5005 TDA5005 Leica Geosystems Industrial Total Stations Leica TDM5005 Motorized Industrial Total Station Industrial keyboard and large illuminated display (8x85 characters LCD) in both faces, compartment for internal battery and PCMCIA memory card, two-axes compensator, servo motor controlled slow motion drives for Hz and V settings, friction coupling, optical sight in both faces, industrial reticule, reticule illumination. Incl. eyepiece FOK73 (32x magnification) 1x GDV3 short range lense for measurement to tape targets (632364), 1x Producer Inspection Certificate M TPS5000 (M) for distance measurements on tape targets (575876) 1x Industrial reticule GSTP25 with concentric circles and central opening for DL2; in shipping container (575692) Not included: AxyzComm Interface or other onboard SW, PCMCIA memory card, battery, tribrach Leica TDA5005 Motorized Industrial Total Station with automatic target recognition Industrial keyboard and large illuminated display (8x85 characters LCD) in both faces, compartment for internal battery and PCMCIA memory card, two-axes compensator, servo motor controlled slow motion drives for Hz and V settings, friction coupling, optical sight in both faces, industrial reticle, reticle illumination. Incl. eyepiece FOK73 (32x magnification) 1x GDV3 short range lense for measurement to tape targets (632364), 1x AP31 aperture for measurements to CCR1.5 reflectors (575873), 1x Producer Inspection Certificate M TPS5000 (M) for distance measurements on tape targets (575876) 1x Producer Inspection Certificate M TPS5000 (M) for distance measurements on Corner Cube Reflector CCR1.5 (575863), 1x Industrial reticle GSTP25 with concentric circles and central opening for DL2 (575692); in shipping container Not included: AxyzComm Interface or other onboard SW, PCMCIA memory card, battery, tribrach Leica Geosystems Industrial Theodolite Leica TM5100A Motorized Industrial Theodolite with pan focal telescope and built-in autocollimation eyepiece Industrial keyboard and large illuminated display (8x85 characters LCD) in both faces, compartment for internal battery and PCMCIA memory card, two-axes compensator, servo motor controlled slow motion drives for Hz and V settings, friction coupling, optical sight in both faces, industrial reticule, reticule illumination. Incl. eyepiece FOK73 (32x magnification) 1x Industrial reticule GSTP24 with concentric circles and central opening for DL2 (575691) 1x SW AxyzComm Interface; in shipping container (575591) Not included: Onboard SW, internal battery, tribrach, PCMCIA memory card, Autocollimation lamp AL51

53 Leica Geosystems Industrial Theodolites & Total Stations Accessories 53 TDM5005 TM5100A TDA5005 Onboard Software AxyzComm Interface Program License for TPS1000/2000/ Man CAT Comm Program License for TPS5000 (also serves as keyboard emulation SW to provide backwards compatibility with T/C2002, T3000 instruments and 3rd party SW) SW DCP05 Basic for Dimensional Control, inclusive DCPCOM for file conversion, with operator s manual, English & German. For TPS 1000/2000/5000 Totalstations SW DCP05 Demo License Not for resale and/or contract work. Available with approval from product management Leica GEO Office Tools for data exchange SW upload and configuration of TPS TPS1000 Program Free-Station Survey TPS1000 Program Local Resection For Surveying SW, please see price list of Surveying & Engineering Division Producer Inspection Certificates All Certificates are traceable to national standards Producer Certificate IMS (O) Producer Inspection Certificate (M) for angles std Producer Inspection Certificate M TPS5000 for distance measurements on Corner Cube Reflector CCR1.5 std. std Producer Inspection Certificate M TPS5000 (M) for distance measurements on tape targets Producer Inspection Certificate M TPS5000 (M) for distance measurement to surveying prisms std. = Standard delivery = Option S&G = Leica Geosystems survey products

54 54 Leica Geosystems Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Manuals Manual TPS1000 System and Programs, English For other languages see S&G price list std. std. std Manual TPS1000 Quick Start, English For other languages see S&G price list std. std. std Manual TPS5000 system (English, German, French in one book) std. std. std User Manual DL2 (English, German, French, Spanish in one book) Manual T-LINK, LINK8, English

55 Leica Geosystems Industrial Theodolites & Total Stations Accessories 55 TDM5005 TM5100A TDA5005 Accessories Remote Control Wireless RF Control Approved for: Australia, EU, Czech Republic, Hungary, Malaysia, Mexico, New Zealand, Norway, Philippines, Poland, Russia, Switzerland, Thailand, Hong Kong (Radio Frequency: 40Mhz, Range: 30m, plugs into a USB port on a Windows computer) incl. CD with drivers and templates for Axyz, Metrolog XG for Leica and emscon Memory Cards and Readers Off-line link via PCMCIA card (e.g. DCP05) S&G PCMCIA SRAM Memory Card, 2 MB (approx. 18,000 data blocks) S&G MCR6 USB Card Reader As an alternative, the operator may also transfer data via serial interface using LGO Tools std. = Standard delivery = Option S&G = Leica Geosystems survey products

56 56 Leica Geosystems Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Cables and PC-Interfaces Cables On-line link to application PC Configuration for single instrument, powered with internal battery Data Cable GEV189, 2m, connects instrument with USB for serial communication (incl. USB electronics). PC driver and user manual included on CD S&G Data Transfer Cable GEV102, 2m, connects instrument and RS232 interface S&G

57 Leica Geosystems Industrial Theodolites & Total Stations Accessories 57 TDM5005 TM5100A TDA Data Transfer Cable 10m, connects instrument and RS232 interface Configuration for single instrument, powered with external battery/ mains S&G Y-Cable GEV58, long, (Lemo 0, Lemo 0, Lemo 1) connects instrument with external power supply T_LINK/GEV208 or battery GEB70/171 and PC (requires additional connector ) or radio link TCPS26B S&G Lemo 0 - RS232 Adapter (9pin female) for and Configuration for multiple instrument, powered with mains S&G Data Cable GEV86, 20 m, connects instrument with external power supply T-LINK/GEV208 or battery GEB70/171 S&G Data Cable GEV52, 1.8m, connects instrument or intensity regulator DL2 with external power supply T-LINK/GEV208 or battery GEB70/171 std. = Standard delivery = Option S&G = Leica Geosystems survey products

58 58 Leica Geosystems Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA Cable Spool for 20m/40m Cables Note: For multi-rs232 adapters on, we recommend Quatech USB adapters such as QSU-100, see also on For each COM port of such multi RS232 adapter, one RS232 cable (9F/9F) is required. Power Supply Mains Power Supply Interface T_LINK (max. total 8 instruments) Power supply unit for TPS, for indoor use only. Input VAC to output 12VDC GEV208, Power supply unit for TPS/GPS, for indoor use only Input VAC to output 12VDC, with connection for power cables S&G

59 Leica Geosystems Industrial Theodolites & Total Stations Accessories 59 TDM5005 TM5100A TDA5005 Batteries & Chargers S&G Internal Battery GEB187, plug-in, nickel-metal-hydride, (Ni-MH), 1.8Ah S&G External Battery GEB171, 12V 8Ah, Ni-MH, rechargeable S&G Charger GKL22, 230V, 50/60Hz, Euro-type plug, charges one battery GEB87, GEB187 or GEB70, normal charge 14 hours S&G Simple Charger GKL22-1, same as GKL22 but with 115 V, 50/60 Hz, and US -type plug S&G GKL221, Charger PRO. To be used with up to two charging adapters GDI221 or GDI222, Charger cable and net adapter included S&G GDI222, Adapter for GKL221 For charging Ni-MH batteries of type GEB121, GEB111,, charger cable included for GEB87, GEB187, GEB77, GEB79, GEB70, GEB71, GEB171 or adapter plate GDI121 std. = Standard delivery = Option S&G = Leica Geosystems survey products

60 60 Leica Geosystems Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Optical Accessories for Instrument Telescope Adapter Plate for TM5100A Active Adapter Plate for TM5100A with power supply (factory fit). USA only Passive Adapter Plate for TM5100A without power supply (factory fit) Internal Targets Internal Target GUS29, for collimation measurements. Factory fit to T3000(A) and TM5100(A) S&G Eyepieces & Filters Eyepiece FOK53, 44x magnification at 10m / 30ft (fitted in serviceshop) S&G GVO13 Objective Sun Filter GFZ3 Diagonal Eyepiece for Telescope, except T Eyepiece GOK6 for steep sights up to 72, rotatable in vertical plane S&G Counterweight for TM5100(A) and T3000(A) if steep angle eyepiece GOK6 is attached GDV3 Short Range Lens for retro targets in container (only replacement, as included in standard delivery of TPS5000 total stations, a re-issue of the certificate M distances is necessary with any new additional lens!) std. std AP31 Aperture (diam = 31mm) for use with TDM/TDA5005 and CCR 1.5 (575875) std.

61 Leica Geosystems Industrial Theodolites & Total Stations Accessories 61 TDM5005 TM5100A TDA5005 Autocollimation Accessories S&G Autocollimation Eyepiece S&G Plug-in Lamp, with cable to battery S&G Battery Box GEB63 for autocollimation eyepiece, without 9V battery AL51 Plug-in Lamp for TM5100A only Autocollimation Mirror GAS1, ø 50mm, in case std. = Standard delivery = Option S&G = Leica Geosystems survey products

62 62 Leica Geosystems Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Diode Laser DL2 Visualizes the line-of-sight by truly non contact means Applied for: - Marking points - Digitizing - Setting-out points by design values - Positioning and alignment - Locating reflectors in remote control mode Configuration for DL2 & instrument power supply via external battery Configuration for DL2 & instrument power supply via interface T_LINK Diode Laser Eyepiece DL2 with manual, in case

63 Leica Geosystems Industrial Theodolites & Total Stations Accessories 63 TDM5005 TM5100A TDA5005 Specifications DL2 Diode Laser Pointer Ambient Conditions Operating temperature -10 C to + 35 C Storage temperature -40 C to + 60 C Humidity 0-95%, non condensing Optic specifications Power output at objective Safety Class 2 Laser Products Eye protection Range on daylight Range in darkness < 1mW Class 2 Laser Product in accordance with: IEC ( ): Safety of Laser Products resp. EN : A11: A2: 2001 Safety of Laser Products Do not stare into the beam or direct it unnecessarily at other persons Integral laser retaining film on beam splitter about 140m about 400m Laser source Wavelength Laser Diode 635mm Dimensions Laser eyepiece with housing 38 x 58 x 25mm Intensity regulator Tilt angle of telescope 98 x 65 x 58mm depending on instrument type (varies with position of DL2) Weight DL2 0.07kg Intensity regulator 0.27kg Counterweight for TM5100(A) and T3000(A) if diode laser DL2/3 is attached External Intensity Controller for all Types of Instruments Intensity regulator Cable, 1m, connects DL2 and intensity regulator Cable GEV63, 1.2m, connects instrument with DL2 intensity regulator std. = Standard delivery = Option S&G = Leica Geosystems survey products

64 64 Leica Geosystems Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Internal intensity controller for TDM5005 and TDA5005 only Conversion Kit DL2 comprising: DM cover (IMS grey) with cable socket and indicating diode, adapter cable between DM - cover and DL2. Factory fitted DL2 Compatible Reticules Reticule GSTP2 for T2002, TPS100 old, TPS1000, TPS5000 with central opening. Retro fit to TM/TDM/5000, TM/TDM/TDA5005 North-Finding Gyroscopes Fully automatic precision surveying gyroscope for North-finding measurements Applied for: - Precision directional measurements, where GPS is inaccessible e.g. - Naval shipbuilding - Tunnelling - Please ask for separate information on Gyromat 3000 by DMT/Germany Technical Data Measuring mode 1 2 Interactive mode Measuring accuracy in mgon 1 10 depends on operation Standard deviationto DIN 18723, ± 1δ Measuring time in minutes (approx.) 10 2 depends on operation Battery capacity for single measurements depends on operation Operating temperature Operating range -20 C to +50 C (-12 C to +45 C calibrated) up to 80 latitude Dimensions and weight GYROMAT 3000 Without Theodolite Transport container Tripod 11,5kg 215mm centering diameter 26kg, 460x460x800mm (LxWxh) 8kg, 300mm diameter

65 Leica Geosystems Industrial Theodolites & Total Stations Accessories 65 TDM5005 TM5100A TDA5005 Target Equipment Targets for Multi-Theodolites Systems Scale Bar 0,9m, carbon fibre, incl. Producer Inspection Certificate, in carrying case Orientation Target (magnetic) Self-adhesive target foils, black/white, ø 23mm, 48 pieces on one sheet Reflectors for Leica Geosystems Total Stations 1) Retro-reflective tape targets for industrial applications 2) Prism reflectors for typical survey applications 3) Corner Cube Reflector for precision measurements 4) 360 Reflector for tracking applications Specifications for Reflectors Default Acceptance Typical accuracy Distance Measurement Distance Offset Angle Range Corner Cube Reflector CCR mm Hz ± mm <600m V ± mm Tape Targets 20 x 20mm 34.4mm ± mm <60m 40 x 40mm 34.4mm ± mm m 60 x 60mm 34.4mm ± mm m Surveying Prisms Prec. Prism GPH1P 0mm ± mm <2500m Miniprism GMP mm ± mm <1000m std. = Standard delivery = Option S&G = Leica Geosystems survey products 360 Prisms GRZ mm Hz 360 2mm <1300m V ± 27 Miniprism GRZ mm Hz mm <500m V ± 27

66 66 Leica Geosystems Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 1) Retro Reflective Tape Targets Inexpensive tape targets available in different design and size Applied for: - Standard applications - Manual measurements Hidden Point rod 0.5m, with tape targets Magnetic Support for hidden point bar, 0.5m Retro Targets, 20x20mm, 20 pieces, self-adhesive (avg. range 2-60m) Retro Targets, 40x40mm 20 pieces, self-adhesive (avg. range m) Retro Targets, 60x60mm 20 pieces, self-adhesive (avg. range m) Ring Shaped Retro Target, 100 pieces ø central aperture = 5mm, ø outside = 26mm, light orange, self-adhesive (avg. range up to 50m) Target-Kit with retro-target on magnetic target, in case, comprising: 20 ring-shaped retro-target, central aperture ø 5mm, outside ø 26mm (575271) 20x retro-target, 20x20mm (635317) 20x retro-target, 40x40mm (635318) 4x RB bases (575776) 1x RBC base (575777) 4x RT3-90 targets (575773) 4x RT3-45 targets (575774) 4x RT3-0 targets (575775)

67 Leica Geosystems Industrial Theodolites & Total Stations Accessories 67 TDM5005 TM5100A TDA Pass Point-Retro Target Set, in case, comprising: 3 swivel targets with retro reflective foils, ø45mm, h=75mm, 3 magnetic bases Roller Alignment Target Fixture, comprising 2 pcs. Floor fixtures 1 pce. Roller fixture 2 pcs. RT3-90 targets (575773) 2 pcs. RT3-45 targets (575774) excl. CCR1.5 reflector (575875) and CCR1.5 supports (576076) RT3-90 Tape target with offset 30mm ± 0.05mm, magnetic. Fits to target base RB and RBC RT3-45 Tape target with offset 30mm ±0.05mm, magnetic, fits to target RB and RBC RT3-0 Tape target with offset 30mm ±0.05mm, magnetic, fits to target base RB and RBC RB Magnetic target base with offset 10mm ±0.05mm, magnetic, fits to tape targets RT RBC Magnetic target base with offset 10mm ±0.05mm, fits to tape targets RT3, with central bolt hole and locating pin std. = Standard delivery = Option S&G = Leica Geosystems survey products

68 68 Leica Geosystems Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 2) Prism Reflectors Glass prism targets for surveying applications Available in different size and centring accuracy Applied for: - Standard applications with fixed target locations - Automatic measurements - Surveying applications For a wider range of prism supports, please ask your Leica Geosystems representative or download catalogue from Circular Prism GPR1 (avg. range up to 2500m) S&G Single Prism Holder GPH1 for GPR1 S&G Miniprism set GMP101 (avg. range up to 1000m) Set with bubble, spike and bag Single Prism Precision Reflector GPH1P (avg. range up to 2500m) S&G 3) Corner Cube Reflectors Air path corner cube in black ( swoxed ) spherical housing Replacement program for broken reflectors available Applied for: - Precision measurements - Automatic measurements - Fully compatible with Leica Geosystems Laser Tracker Reflector CCR 1.5, swoxed (avg. Range up to 600m) For wide range of supports, please consult Leica Geosystems Laser Tracker section

69 Leica Geosystems Industrial Theodolites & Total Stations Accessories 69 TDM5005 TM5100A TDA5005 4) 360 Reflectors Glass prism targets for surveying applications Available in different size and centring accuracy Applied for: - Automatic tracking measurements in Step-and-Go mode For a wider range of prism supports, please ask your Leica Geosystems representative or download catalogue from S&G Prism Reflector GZR121 (avg. range up to 1300m) for typical use with TDA5005 in tracking mode with low accuracy requirements Tripods and Centring Devices Tribrach GDF21-I, industrial tribrach, without optical plummet, light grey GDF22-I, industrial tribrach with optical, plummet, light grey Aluminium Tripods Aluminium Tripod AT21 with adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and laser tracker field check equipment. Instrument height from m, weight 11kg Aluminium Tripod AT28 with adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and laser tracker field check equipment. Instrument height from m, weight 12kg std. = Standard delivery = Option S&G = Leica Geosystems survey products

70 70 Leica Geosystems Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA Tripod Bracket in order to attach accessories (battery, DL2 intensity regulator, Radio Modem) to AT21/28 tripods Wooden Tripods Tripod GST20, telescopic, with accessories. Robust, well-established tripod for general use. Suitable for levels, lasers, Total Stations and GPS. Extendible 180cm (5.9ft), weight 6.4kg (14.1lb) S&G Tripod Base GST4, for setting up GST tripods on smooth surfaces. S&G Translation Stages Precision translation stage to shift instrument along axis Applied to: - Alignment to references - Alignment of instruments and/or targets 1st GMT5 shifts in single direction; a 2nd translation stage is required for orthogonal shifts Measuring Slide GMT5 (single direction) with maximum working range 40mm; least count 0.01mm GAD12 Adapter Set for mounting GMT5 translation stage onto any Leica tribrach; includes tribrach to mount instrument; typical adapter set for theodolites and total stations GAD13 Adapter Set for mounting GMT5 translation stage onto 5/8 thread; includes adapter plate with 5/8 thread to mount instruments; typical adapter set for levels

71 Leica Geosystems Industrial Theodolites & Total Stations Accessories 71 TDM5005 TM5100A TDA5005 NIVEL230 for Levelling Currently, there is not a supported software package for this usage. This information is provided for customers that are interested in creating their own SW solutions, or have existing solutions NIVEL230, inclination sensor for Laser Tracker with RS232 interface Supports gravity-based coordinate measurements, with Producer Inspection Certificate M NIVEL m Power Supply Cable Connects Nivel sensors to power supply unit m Connection Cable. Connects NIVEL230 sensor ports 1 and 2 to PC for data communication etc. Lemo to 9 pin RS232 serial connector Power supply unit for Nivel sensors For indoor use only, input 100V-240VAC Hz, output 12VDC, cable with 5 pin Lemo. No mains cable included Power Cord for Dual Bay Charger GKL24 or Nivel200 Power supply unit, US-Version Power Cord for Dual Bay Charger GKL24 or Nivel200 Power supply unit, EU-Version Power Cord for Dual Bay Charger GKL24 or Nivel200 Power supply unit, UK-Version Power Cord for Dual Bay Charger GKL24 or Nivel200 Power supply unit, AUS-Version Power Cord for Dual Bay Charger GKL24 or Nivel200 Power supply unit, CH-Version std. = Standard delivery = Option S&G = Leica Geosystems survey products

72 72 Comprehensive Service Contracts TM5100A TDM5005 TDA5005 Repairs Re-certification and/or maintenance work does not include repair. If repairs are necessary, the Customer will be notified and informed of the estimated costs (labor and parts) and of necessary repair time, including shipment. Repairs are only carried out at Leica Geosystems Service Center Planning At least 4 weeks in advance, Leica Geosystems and the Customer agree in writing on an appropriate date for carrying out services either on site or at a Service Center

73 Leica Geosystems TPS5000 Service Products 73 TDM5005 TM5100A TDA5005 Maintenance TPS5000 Standard Maintenance Maintenance, accuracy testing and service inspection, Certificate O (compliant within specs). Carried out at Service Center, Heerbrugg. Includes shipping. Excludes repairs (labor & parts), insurance, taxes & duties. Available in years 1, 2 and 3 after initial purchase or after an Extended Maintenance TPS5000 Extended Maintenance Extended maintenance, including greasing and/or replacement of mechanics when needed, accuracy testing and service inspection, Certificate O (compliant within specs). Carried out at Service Center, Heerbrugg. Includes shipping. Excludes repairs (labor & parts), insurance, taxes & duties. Mandatory every 4 th. year after purchase. Re-certification (option to Maintenance) TM5100A Re-certification for Angles Service Inspection Certificate M for Angle Measurements. Carried out at Service Center, Heerbrugg. Only available in combination with Standard or Extended Maintenance TDM5005/TDA5005 Re-certification for Angles Service Inspection Certificate M for Angle Measurements. Carried out at Service Center, Heerbrugg. Only available in combination with Standard or Extended Maintenance TDM5005/TDA5005 Re-certification to CCR1.5 Service Inspection Certificate M for Distance Measurements on Corner Cube Reflector s 1.5. Carried out at Service Center, Heerbrugg. Only available in combination with Standard or Extended Maintenance. std. = Standard delivery = Option S&G = Leica Geosystems survey products L = Set

74 74 Leica Geosystems TPS5000 Service Products TM5100A TDM5005 TDA5005 Extended Warranty TDM5005 & TDA5005 Extended Warranty Extention of Warranty contract covering parts and labor. Duration: 12 months. Can only be offered in combination with a maintenance contract. Limited to max 5 years after delivery of the system. Carried out at Customer Service Center, Heerbrugg. Including shipping, spare parts & labor of main instrument. Excl. insurance, taxes & duties. Ext. Warranty excludes accessories and consumables (batteries, reflectors etc.).tdm5005 & TDA5005 Extended Warranty TM5100A Extended Warranty Extention of Warranty contract covering parts and labor. Duration: 12 months. Can only be offered in combination with a maintenance contract. Limited to max 5 years after delivery of the system. Carried out at Customer Service Center, Heerbrugg. Including shipping, spare parts & labor of main instrument. Excl. insurance, taxes & duties. Ext. Warranty excludes accessories and consumables (batteries, reflectors etc.). Standby Units TDA5005/TM5001A Stand-by Unit A Stand-by Unit can be ordered for the time the instrument is not at disposal of customer due to service or maintenance works. Includes instrument, required onboard software and mutually agreed accessories. Supplied on availability. To be ordered at 2 weeks prior notice. Shipping, insurance and custom expenses excluded. Ordering these Services at [email protected] For details please contact [email protected] at the Central Technical Service in Heerbrugg. General Terms and Conditions for the Maintenance and/or Support by Metrology Division of Leica Geosystems apply for all services & contracts. CCR Replacement Replacement Corner Cube Reflector CCR 1.5 ( swoxed ) Defective part must be returned to Heerbrugg attn. Jacqueline Binkert with Label Parts to be returned, mailto: [email protected]] Ordering these Services at [email protected]. For details please contact [email protected] at the Central Technical Service in Heerbrugg. General Terms and Conditions for the Maintenance and/or Support by Metrology Division of Leica Geosystems apply for all services & contracts. std. = Standard delivery = Option S&G = Leica Geosystems survey products L = Set

75 75

76 76 Whether building the fastest car, the biggest plane or the most precise tooling, you need exact measurements to improve quality and productivity. So when it has to be right, professionals trust Leica Geosystems metrology products to help collect, analyze and present 3-dimensional (3D) data for industrial measurement. Leica Geosystems Metrology is best known for its broad array of control and industrial measurement products, including high-precision industrial theodolites and total stations, laser trackers and 6 Degrees of Freedom-based (6DOF) Portable CMM systems. The latter include the Leica T-Probe handheld armless probe, Leica T-Scan hand-held laser scanner and Leica T-Mac tracking device for automated applications. Leica Geosystems also offers a broad range of 3D metrology software solutions. Those who use the metrology products by Leica Geosystems every day trust them for their dependability, the value they deliver and the world-class service and support that s second to none. Precision, reliability and service from Leica Geosystems metrology products. When it has to be right Copyright 2008 Leica Geosystems AG, Unterentfelden, Switzerland Non contractual pictures. Specifications are given as information and can change without notice. For more information, please contact [email protected] Leica Absolute Tracker Product Brochure Art PCMM System Specifications Leica Absolute Tracker and Leica T-Products Art Leica Geosystems AG Metrology Products Moenchmattweg 5 CH-5035 Unterentfelden Switzerland Phone Fax [email protected]