13th Multiphase Flow Conference and Short Course: Simulation, Experiment and Application Dresden, November 2015
|
|
- Leo Strickland
- 8 years ago
- Views:
Transcription
1 Tuesday, 24 November 2015 Short Course on Multiphase Flows 08:30 09:15 Registration 09:15 09:25 D. Lucas Rossendorf Welcome 09:25 10:20 G. Scheuerer ANSYS Germany, Otterfing Mathematical Models for Multiphase Flows: Overview & Basic Equations 10:20 10:30 10:30 11:35 T. Esch ANSYS Germany, Otterfing Lagrangian Two-Phase Flow Modelling 11:35 11:45 11:45 12:50 U. Hampel 12:50 14:00 Measurement Techniques and Experimental Investigations for Multiphase Flows 14:00 15:05 G. Scheuerer ANSYS Germany, Otterfing Eulerian Multiphase Flow Modelling: Phase Interaction Models 15:05 15:15 15:15 16:20 E. Krepper 16:20 16:30 Rossendorf Interfacial Heat and Mass Transfer Models 16:30 17:30 T. Esch & G. Scheuerer ANSYS Germany, Otterfing Practical Demonstration of Eulerian & Lagrangian CFD Simulation 17:30 18:15 All 18:15 Discussion, Questions & Answers Transfer to Dresden 19:00 Short Course Restaurant "Schillergarten"
2 Wednesday, 25 November Multiphase Flow Conference - Session 1 Short Course on Multiphase Flows - Simulation Branch 09:00 09:50 E. Krepper 09:50 10:00 10:00 10:50 T. Höhne 10:50 11:00 11:00 12:00 D. Lucas 12:00 13:00 Dispersed Flow Modelling - Multiple-Size Group Modelling - MUSIG Stratified & Segregated Flow Modellig - Interfacial Area Density Models - AIAD Multi-Scale Modelling Techniques - GENTOP Short Course on Multiphase Flows - Experimental Branch 09:00 12:00 U. Hampel & E. Schleicher Interactive Seminar on the Application of Two-Phase Flow Measuring Techniques - Wire-Mesh Sensors & Gamma CT 12:00 13:00
3 12:30 13:00 Registration Conference Wednesday, 25 November Multiphase Flow Conference - Session 1 G. Scheuerer ANSYS Germany, Otterfing 13:00 13:10 G. Gerbeth 13:10 14:00 T. Sattelmayer Technische Universität München, München Welcome Keynote - Shortfalls and Improvements in CFD Modelling of Critical Heat Flux 14:00 14:30 E. Menter General Electric, Garching Two-Phase Flow Modelling in Helico-Axial Pumps 14:30 15:00 S. Ketterl 15:30 15:50 Universität der Bundeswehr München, Neubiberg Towards Large Eddy Simulation of Liquid Jet Atomization: DNS and a-priori Subgrid Analysis D. Lucas Multiphase Flow Conference - Session 2 15:50 16:40 N. G. Deen Technische Universiteit Eindhoven, Eindhoven Keynote: Bubbles on the Cutting Edge, or How to Intensify Bubble Columns 16:40 17:10 S. Waldeck Universität Bremen, Bremen Multiphase Investigation of Intensive Quenching with Waterjets 17:15 19:00 19:00 20:00 22:30 Visit of the Experimental Institute of Fluid Dynamics Transfer to Dresden Conference Restaurant "Sophienkeller"
4 Thursday, 26 November 2015 E. Krepper Multiphase Flow Conference - Session 3 08:30 09:00 N. Vogl SMS Group, Düsseldorf Multiphase Flow Simulation of a Steelmaking Ladle 09:00 09:30 H. Yang Forschungszentrum Jülich, Jülich Modeling Liquid Metal Droplet Collisions in the Slag Cleaning Process 09:30 10:00 C. Boffa 10:00 10:15 Technische Universität München, München A 1D Multiphase Mixture Model for Flows in Porous Media: Model Development Multiphase Flow Conference - Session 4 T. Esch ANSYS Germany, Otterfing 10:15 10:45 K. Amend 10:45 11:15 P. S. Weber 11:15 11:45 J. Kim 11:45 12:15 S. Meyer FES, Zwickau Universität der Bundeswehr München, Neubiberg Technische Universität Darmstadt, Darmstadt Seoul National University of Science and Technology, Seoul Influence of the Contact Angle Model on Gravity-Driven Water Films An ALE Interface Tracking Method for Species Transfer of Rising Bubbles Numerical Simulation of Upward Bubbly Pipe Flows Using Two-Fluid Models Multiphase CFD-Analysis for Filling of an Automotive SCR Tank System under Extreme Conditions with ANSYS Fluent as an Alternative to Tests for Trend Analysis and Optimization 12:15 13:15
5 T. Höhne Multiphase Flow Conference - Session 5 13:15 13:45 M. Momeni Grundfos Holding, Bjerringbro On Site Electrochlorination 13:45 14:15 G. M. Osnaya Chavero 14:15 14:45 P. Bartsch Instituto Politécnico Nacional, Ciudad de Mexico Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart 14:45 15:15 M. Salehi Technische Universität Berlin, Berlin CFD Modeling of a Liquid-Solid Downflow Fluidized Bed Bioreactor Flow Field and Heat Transfer in Moving Bed Heat Exchangers A Continuous Model Approach and Experimental Comparison CFD Simulation of Bubbling Fluidized Bed: The Effect of Wall Boundary Conditions on Solid Flow Behaviour 15:15 15:30 R. Rzehak 15:30 16:00 D. Bauer Technische Universität Bergakademie Freiberg, Freiberg Characterisation of a Cavitating Pipe Flow Using X-Ray Computed Tomography (CT) 16:00 16:30 J. Schlottke MAHLE Behr, Stuttgart Investigation of a Viscous Coupling using CFD Validated by Enhanced Tomographics Imaging Techniques 16:30 17:00 T. Frank ANSYS Germany, Otterfing Investigation of the Hydraulic Flip Phenomenon for Diesel Fuel Cavitation in a Planar Injection Nozzle 17:00 Farewell
Computational Fluid Dynamics (CFD) and Multiphase Flow Modelling. Associate Professor Britt M. Halvorsen (Dr. Ing) Amaranath S.
Computational Fluid Dynamics (CFD) and Multiphase Flow Modelling Associate Professor Britt M. Halvorsen (Dr. Ing) Amaranath S. Kumara (PhD Student), PO. Box 203, N-3901, N Porsgrunn, Norway What is CFD?
More informationComputational Fluid Dynamic Modeling Applications
Computational Fluid Dynamic Modeling Applications Canadian Heavy Oil Conference Dr. Marvin Weiss What is CFD Computational Fluid Dynamics Colorful Fluid Dynamics Colors For Directors Carefully Fitted Data
More informationQualification of Thermal hydraulic codes within NURESIM D. Bestion (CEA, France)
Qualification of Thermal hydraulic codes within NURESIM D. Bestion (CEA, France) The thermalhydraulic codes used for nuclear safety applications Validation and Verification of codes Validation of system
More informationME6130 An introduction to CFD 1-1
ME6130 An introduction to CFD 1-1 What is CFD? Computational fluid dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
More informationCFD simulation of fibre material transport in a PWR core under loss of coolant conditions
CFD simulation of fibre material transport in a PWR core under loss of coolant conditions T. Höhne, A. Grahn, S. Kliem Forschungszentrum Dresden- Rossendorf (FZD) Institut für Sicherheitsforschung Postfach
More informationCFD Simulation of Subcooled Flow Boiling using OpenFOAM
Research Article International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347-5161 2014 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet CFD
More informationC3: LIMMCAST: Modelling of steel casting. Helmholtz-Zentrum Dresden-Rossendorf (HZDR), D-01314 Dresden 2
C3: LIMMCAST: Modelling of steel casting S. Eckert 1, R. Schwarze 2 1 Helmholtz-Zentrum Dresden-Rossendorf (HZDR), D-01314 Dresden 2 TU Bergakademie Freiberg, Inst. für Mechanik und Fluiddynamik, D-09599
More informationEuler-Euler and Euler-Lagrange Modeling of Wood Gasification in Fluidized Beds
Euler-Euler and Euler-Lagrange Modeling of Wood Gasification in Fluidized Beds Michael Oevermann Stephan Gerber Frank Behrendt Berlin Institute of Technology Faculty III: School of Process Sciences and
More informationLARGE EDDY SIMULATIONS FOR DISPERSED BUBBLY FLOWS. T. Ma, T. Ziegenhein, D. Lucas, E. Krepper
CFD4NRS-5, Zürich, Switzerland September 09-11, 2014 LARGE EDDY SIMULATIONS FOR DISPERSED BUBBLY FLOWS T. Ma, T. Ziegenhein, D. Lucas, E. Krepper Helmholtz-Zentrum Dresden-Rossendorf Institute of Fluid
More informationRESEARCH PROJECTS. For more information about our research projects please contact us at: info@naisengineering.com
RESEARCH PROJECTS For more information about our research projects please contact us at: info@naisengineering.com Or visit our web site at: www.naisengineering.com 2 Setup of 1D Model for the Simulation
More informationModelling and Computation of Compressible Liquid Flows with Phase Transition
JASS 2009 - Joint Advanced Student School, Saint Petersburg, 29. 03. - 07. 04. 2009 Modelling and Simulation in Multidisciplinary Engineering Modelling and Computation of Compressible Liquid Flows with
More informationFlow Assurance & Operability
Flow Assurance & Operability Erosion due to sand production Date Business Name Overview 1. What causes erosion? 2. Sand production and transport 3. Sand management 4. Instrumentation / monitoring of sand
More informationLecture 14 - Multiphase Flows. Applied Computational Fluid Dynamics
Lecture 14 - Multiphase Flows Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (2002-2006) Fluent Inc. (2002) 1 Definitions Multiphase flow is simultaneous
More informationADVANCED TOOL FOR FLUID DYNAMICS- CFD AND ITS APPLICATIONS IN AUTOMOTIVE, AERODYNAMICS AND MACHINE INDUSTRY
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 2, March-April 2016, pp. 177 186, Article ID: IJMET_07_02_019 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=2
More informationTwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations
TwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations 05.06.2014 Dipl.-Ing. Jan Hesse, Dr. Andreas Spille-Kohoff CFX Berlin Software GmbH Karl-Marx-Allee 90 A 10243
More informationIntroduction to CFD Analysis
Introduction to CFD Analysis Introductory FLUENT Training 2006 ANSYS, Inc. All rights reserved. 2006 ANSYS, Inc. All rights reserved. 2-2 What is CFD? Computational fluid dynamics (CFD) is the science
More informationMultiphase Flow - Appendices
Discovery Laboratory Multiphase Flow - Appendices 1. Creating a Mesh 1.1. What is a geometry? The geometry used in a CFD simulation defines the problem domain and boundaries; it is the area (2D) or volume
More informationCHEMICAL ENGINEERING AND CHEMICAL PROCESS TECHNOLOGY - Vol. I - Interphase Mass Transfer - A. Burghardt
INTERPHASE MASS TRANSFER A. Burghardt Institute of Chemical Engineering, Polish Academy of Sciences, Poland Keywords: Turbulent flow, turbulent mass flux, eddy viscosity, eddy diffusivity, Prandtl mixing
More informationIntroduction to CFD Analysis
Introduction to CFD Analysis 2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
More informationExpress Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology
Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry
More informationCFD Analysis Of Multi-Phase Flow And Its Measurements
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 9, Issue 4 (Nov. - Dec. 2013), PP 30-37 CFD Analysis Of Multi-Phase Flow And Its Measurements C
More informationDevelopment and Validation of Bubble Breakup and Coalescence Constitutive Models for the One-Group Interfacial Area Transport Equation
TECHNISCHE UNIVERSITÄT MÜNCHEN Lehrstuhl für Nukleartechnik Development and Validation of Bubble Breakup and Coalescence Constitutive Models for the One-Group Interfacial Area Transport Equation Filippo
More informationA Common Engine Platform for Engine LES Development and Validation
A Common Engine Platform for Engine LES Development and Validation Volker Sick, D. Reuss, P. Abraham, A. Alharbi, O. Almagri, & H. Chen University of Michigan, Ann Arbor, MI, USA Chris Rutland & Y. Zhang,
More informationFLUID MECHANICS IM0235 DIFFERENTIAL EQUATIONS - CB0235 2014_1
COURSE CODE INTENSITY PRE-REQUISITE CO-REQUISITE CREDITS ACTUALIZATION DATE FLUID MECHANICS IM0235 3 LECTURE HOURS PER WEEK 48 HOURS CLASSROOM ON 16 WEEKS, 32 HOURS LABORATORY, 112 HOURS OF INDEPENDENT
More informationFluid Dynamic Optimization of Flat Sheet Membrane Modules Movement of Bubbles in Vertical Channels
A publication of 151 CHEMICAL ENGINEERING TRANSACTIONS VOL. 32, 213 Chief Editors: Sauro Pierucci, Jiří J. Klemeš Copyright 213, AIDIC Servizi S.r.l., ISBN 978-88-9568-23-5; ISSN 1974-9791 The Italian
More informationPrimary Breakup Model Considering Spray Core Development. Center of Smart Interfaces, Technische Universitaet Darmstadt, D-64287 Darmstadt
, 23rd Annual Conference on Liquid Atomization and Spray Systems, Brno, Czech Republic, September 2010 Fabian Fischer *1, B. Heine 1 and C. Tropea 2 1 Corporate Research, Robert Bosch GmbH, D-70839 Gerlingen
More informationModeling and Simulations of Cavitating and Bubbly Flows
Muon Collider/Neutrino Factory Collaboration Meeting Riverside, California, January 27-31, 2004 Modeling and Simulations of Cavitating and Bubbly Flows Roman Samulyak Tianshi Lu, Yarema Prykarpatskyy Center
More informationCompressible Flows with Condensation and Cavitation - Modelling and Computation of Dynamic Phase Transition of Vapour and Liquids
JASS 2008 - Joint Advanced Student School, Saint Petersburg, 9. - 19.3.2008 Modelling and Simulation in Multidisciplinary Engineering Compressible Flows with Condensation and Cavitation - Modelling and
More information3. Prescribe boundary conditions at all boundary Zones:
CFD ANALYSIS OF CHANGE IN SHAPE OF SUCTION MANIFOLD TO IMPROVE PERFORMANCE OF THE CENTRIFUGAL PUMP ABSTRACT Mr. Suraj K. Patil PG Student, Department of Mechanical Engineering /BIGCE, Solapur University,
More informationLecture 16 - Free Surface Flows. Applied Computational Fluid Dynamics
Lecture 16 - Free Surface Flows Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (2002-2006) Fluent Inc. (2002) 1 Example: spinning bowl Example: flow in
More informationModeling and Simulation of Complex Multiphase Flows in the Pharmaceutical Industry
SIMNET Days 2010 Februar 10, 2010 Modeling and Simulation of Complex Multiphase Flows in the Pharmaceutical Industry D. Suzzi a, G. Toschkoff a, S. Radl a,b, Th. Hörmann a, M. Schaffer a, D. Machold a,
More informationHollow Cone Spray Characterization and Integral Modeling
Technische Universität München Institut für Energietechnik Lehrstuhl für Thermodynamik Hollow Cone Spray Characterization and Integral Modeling Peter Bollweg Vollständiger Abdruck der von der Fakultät
More informationwalberla: A software framework for CFD applications on 300.000 Compute Cores
walberla: A software framework for CFD applications on 300.000 Compute Cores J. Götz (LSS Erlangen, jan.goetz@cs.fau.de), K. Iglberger, S. Donath, C. Feichtinger, U. Rüde Lehrstuhl für Informatik 10 (Systemsimulation)
More informationUNIVERSITY OF MODENA & REGGIO EMILIA
Luca Montorsi Personal information CURRICULUM VITAE Address Office: via Amendola 2, Pad. Morselli - Telephone Office: +39 0522 523 502 Fax Office: +39 0522 522 609 E-mail Nationality Italian Date of birth
More informationCustomer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved.
Lecture 2 Introduction to CFD Methodology Introduction to ANSYS FLUENT L2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions,
More informationCFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER
International Journal of Advancements in Research & Technology, Volume 1, Issue2, July-2012 1 CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER ABSTRACT (1) Mr. Mainak Bhaumik M.E. (Thermal Engg.)
More informationAdaptation and validation of OpenFOAM CFD-solvers for nuclear safety related flow simulations
Adaptation and validation of OpenFOAM CFD-solvers for nuclear safety related flow simulations SAFIR2010 Seminar, 10.-11.3.2011, Espoo Juho Peltola, Timo Pättikangas (VTT) Tomas Brockmann, Timo Siikonen
More informationInvestigations on Slags under Gasification Process Conditions
Zentrum für Innovationskompetenz: Virtual High Temperature Conversion Investigations on Slags under Gasification Process Conditions Daniel Schwitalla, Arne Bronsch, Stefan Guhl 6th International Freiberg
More informationA. Hyll and V. Horák * Department of Mechanical Engineering, Faculty of Military Technology, University of Defence, Brno, Czech Republic
AiMT Advances in Military Technology Vol. 8, No. 1, June 2013 Aerodynamic Characteristics of Multi-Element Iced Airfoil CFD Simulation A. Hyll and V. Horák * Department of Mechanical Engineering, Faculty
More informationLaboratory scale electrical resistivity measurements to monitor the heat propagation within porous media for low enthalpy geothermal applications
32 CONVEGNO NAZIONALE 19-21 Novembre 2013 TRIESTE Laboratory scale electrical resistivity measurements to monitor the heat propagation within porous media for low enthalpy geothermal applications N. Giordano
More informationHYBRID ROCKET TECHNOLOGY IN THE FRAME OF THE ITALIAN HYPROB PROGRAM
8 th European Symposium on Aerothermodynamics for space vehicles HYBRID ROCKET TECHNOLOGY IN THE FRAME OF THE ITALIAN HYPROB PROGRAM M. Di Clemente, R. Votta, G. Ranuzzi, F. Ferrigno March 4, 2015 Outline
More informationO.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM. Darmstadt, 27.06.2012
O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM Darmstadt, 27.06.2012 Michael Ehlen IB Fischer CFD+engineering GmbH Lipowskystr. 12 81373 München Tel. 089/74118743 Fax 089/74118749
More informationMobile Machines UPDATE Use HYDAC Expertise to avoid Air in Hydraulic Systems
Mobile Machines UPDATE Use HYDAC Expertise to avoid Air in Hydraulic Systems The Problem: Smaller hydraulic tanks are a cause of air in oil Current requirements for mobile machines Emission Standards Energy
More informationSimulation to Analyze Two Models of Agitation System in Quench Process
20 th European Symposium on Computer Aided Process Engineering ESCAPE20 S. Pierucci and G. Buzzi Ferraris (Editors) 2010 Elsevier B.V. All rights reserved. Simulation to Analyze Two Models of Agitation
More informationCFD Code Validation Against Stratified Air-Water Flow Experimental Data
CFD Code Validation Against Stratified Air-Water Flow F. Terzuoli, M.C. Galassi, D. Mazzini, F. D Auria University of Pisa Department of Mechanics, Nuclear and Production Engineering Via Diotisalvi 2,
More informationIntroduction to Computational Fluid Dynamics (CFD) for Combustion. www.reaction-eng.com (801) 364-6925
Introduction to Computational Fluid Dynamics (CFD) for Combustion www.reaction-eng.com (801) 364-6925 What is CFD? CFD stands for Computational Fluid Dynamics CFD uses computers to represent (or model)
More informationLecture 6 - Boundary Conditions. Applied Computational Fluid Dynamics
Lecture 6 - Boundary Conditions Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (2002-2006) Fluent Inc. (2002) 1 Outline Overview. Inlet and outlet boundaries.
More informationFlow measurement using Wire-Mesh Sensor technique
Flow measurement using Wire-Mesh Sensor technique Dr. Arto Ylönen / LUT Nordic-Gen4 Seminar September 4-5, 2014 Lappeenranta, Finland Contents Introduction Applications of Wire-Mesh Sensor technique Examples
More informationS.L. Chang, S.A. Lottes, C.Q. Zhou,** B. Golchert, and M. Petrick
3 -- 3 CFD CODE DEVELOPMENT FOR PERFORMANCE EVALUATION OF A PILOT-SCALE FCC RISER REACTOR* S.L. Chang, S.A. Lottes, C.Q. Zhou,** B. Golchert, and M. Petrick Ekergy Systems Division Argonne National Laboratory
More informationNumerical Simulation of Thermal Stratification in Cold Legs by Using OpenFOAM
Progress in NUCLEAR SCIENCE and TECHNOLOGY, Vol. 2, pp.107-113 (2011) ARTICLE Numerical Simulation of Thermal Stratification in Cold Legs by Using OpenFOAM Jiejin CAI *, and Tadashi WATANABE Japan Atomic
More informationNumerical Simulations of Pulsed-Air Mixing Technology using Multiphase Computational Fluid Dynamics Methods
Numerical Simulations of Pulsed-Air Mixing Technology using Multiphase Computational Fluid Dynamics Methods Rinaldo G. Galdamez, Stephen Wood, Seckin Gokaltun Florida International University, Applied
More informationTHE NUMERICAL SIMULATION CONFERENCE
EXHIBITION & SPONSORSHIP PROGRAM THE NUMERICAL SIMULATION CONFERENCE ANSYS CONFERENCE & 33 rd CADFEM USERS MEETING 2015 CONVERGENCE EXHIBITION & SPONSORSHIP PROGRAM THE NUMERICAL SIMULATION CONFERENCE
More information5.2. Vaporizers - Types and Usage
5.2. Vaporizers - Types and Usage 5.2.1. General Vaporizers are constructed in numerous designs and operated in many modes. Depending upon the service application the design, construction, inspection,
More informationCFD MODELLING OF HYDRODYNAMICS IN SUPERCRITICAL FLUID EXTRACTION SYSTEMS
14 th European Conference on Mixing Warszawa, 10-13 September 2012 CFD MODELLING OF HYDRODYNAMICS IN SUPERCRITICAL FLUID EXTRACTION SYSTEMS Jan Krzysztoforski, Marek Henczka Warsaw University of Technology,
More informationModel of a flow in intersecting microchannels. Denis Semyonov
Model of a flow in intersecting microchannels Denis Semyonov LUT 2012 Content Objectives Motivation Model implementation Simulation Results Conclusion Objectives A flow and a reaction model is required
More informationCFD Simulation of HSDI Engine Combustion Using VECTIS
CFD Simulation of HSDI Engine Combustion Using VECTIS G. Li, S.M. Sapsford Ricardo Consulting Engineer s Ltd., Shoreham-by-Sea, UK ABSTRACT As part of the VECTIS code validation programme, CFD simulations
More informationCCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future
. CCTech TM Simulation is The Future ICEM-CFD & FLUENT Software Training Course Brochure About. CCTech Established in 2006 by alumni of IIT Bombay. Our motive is to establish a knowledge centric organization
More information14 DRIFT FLUX MODELS
14 DRIFT FLUX MODELS 14.1 INTRODUCTION In this chapter we consider a class of models of multiphase flows in which the relative motion between the phases is governed by a particular subset of the flow parameters.
More informationContents. Microfluidics - Jens Ducrée Physics: Fluid Dynamics 1
Contents 1. Introduction 2. Fluids 3. Physics of Microfluidic Systems 4. Microfabrication Technologies 5. Flow Control 6. Micropumps 7. Sensors 8. Ink-Jet Technology 9. Liquid Handling 10.Microarrays 11.Microreactors
More informationDimensional analysis is a method for reducing the number and complexity of experimental variables that affect a given physical phenomena.
Dimensional Analysis and Similarity Dimensional analysis is very useful for planning, presentation, and interpretation of experimental data. As discussed previously, most practical fluid mechanics problems
More informationCONVERGE Features, Capabilities and Applications
CONVERGE Features, Capabilities and Applications CONVERGE CONVERGE The industry leading CFD code for complex geometries with moving boundaries. Start using CONVERGE and never make a CFD mesh again. CONVERGE
More informationExperimentation and Computational Fluid Dynamics Modelling of Roughness Effects in Flexible Pipelines
Experimentation and Computational Fluid Dynamics Modelling of Roughness Effects in Flexible Pipelines Sophie Yin Jeremy Leggoe School of Mechanical and Chemical Engineering Daniel Teng Paul Pickering CEED
More informationBrennstoffzellen in der Luftfahrt
Brennstoffzellen in der Luftfahrt Deutsches Zentrum für Luft und Raumfahrt Institut für Technische Thermodynamik Pfaffenwaldring 38-48, D-70569 Stuttgart, Sven Schmidt, Josef Kallo, Andreas Friedrich,
More informationSimulation of Water-in-Oil Emulsion Flow with OpenFOAM using Validated Coalescence and Breakage Models
Simulation of Water-in-Oil Emulsion Flow with OpenFOAM using Validated Coalescence and Breakage Models Gabriel G. S. Ferreira*, Jovani L. Favero*, Luiz Fernando L. R. Silva +, Paulo L. C. Lage* Laboratório
More informationThermische Speicherung von Solarenergie
Thermische Speicherung von Solarenergie Dr. Thomas Bauer Institut für Technische Thermodynamik Stuttgart, Köln 15. Kölner Sonnenkolloquium, 12.6.2012 www.dlr.de/tt Slide 2 > 15. Kölner Sonnenkolloquium
More informationCondensation of Moist Air in Heat Exchanger Using CFD
Condensation of Moist Air in Heat Exchanger Using CFD Jan Barák, Karel Fraňa, Jörg Stiller Abstract This work presents results of moist air condensation in heat exchanger. It describes theoretical knowledge
More informationThe soot and scale problems
Dr. Albrecht Kaupp Page 1 The soot and scale problems Issue Soot and scale do not only increase energy consumption but are as well a major cause of tube failure. Learning Objectives Understanding the implications
More informationA comparison of heterogenous and homogenous models of two-phase transonic compressible
Home Search Collections Journals About Contact us My IOPscience A comparison of heterogenous and homogenous models of two-phase transonic compressible CO 2 flow through a heat pump ejector This content
More informationCHAPTER 4 CFD ANALYSIS OF THE MIXER
98 CHAPTER 4 CFD ANALYSIS OF THE MIXER This section presents CFD results for the venturi-jet mixer and compares the predicted mixing pattern with the present experimental results and correlation results
More information4.What is the appropriate dimensionless parameter to use in comparing flow types? YOUR ANSWER: The Reynolds Number, Re.
CHAPTER 08 1. What is most likely to be the main driving force in pipe flow? A. Gravity B. A pressure gradient C. Vacuum 2.What is a general description of the flow rate in laminar flow? A. Small B. Large
More informationFully Automatic In-cylinder Workflow Using HEEDS / es-ice / STAR-CD
Fully Automatic In-cylinder Workflow Using HEEDS / es-ice / STAR-CD Simon Fischer Senior ICE Application Support Engineer CD-adapco Nuremberg Office Gerald Schmidt Director/Powertrain - CD-adapco New York
More informationHeat Transfer Prof. Dr. Ale Kumar Ghosal Department of Chemical Engineering Indian Institute of Technology, Guwahati
Heat Transfer Prof. Dr. Ale Kumar Ghosal Department of Chemical Engineering Indian Institute of Technology, Guwahati Module No. # 04 Convective Heat Transfer Lecture No. # 03 Heat Transfer Correlation
More informationDevelopment and Modelling of 3 rd Generation Gasification Concepts for Low Grade Coals
Institute of Energy Process Engineering and Chemical Engineering Development and Modelling of 3 rd Generation Gasification Concepts for Low Grade Coals Martin Gräbner, Alexander Laugwitz, Bernd Meyer International
More informationENGINEERING SIMULATION TAKES FLIGHT
ENGINEERING SIMULATION TAKES FLIGHT Parker Aerospace uses ANSYS technology to reduce time and costs as well as risk in the design of aircraft systems. By Carsten Mehring, CFD Technology Lead, Parker Aerospace,
More informationSimulation of a base case for future IGCC concepts with CO 2 capture
Simulation of a base case for future IGCC concepts with CO 2 capture Christian Kunze, Hartmut Spliethoff Institute for Energy Systems TU München for 4 th Clean Coal Technology Conference 2009 18 20 May,
More informationWelcoming and Registration Keynote Lecture: The development of the Common Rail in Apulia Mario Ricco CRF, MEDIS
1st edition Bari, 21-25 September 2015 Provisional Program September 21 Morning Afternoon Welcoming and Registration Keynote Lecture: The development of e Common Rail in Apulia Mario Ricco CRF, MEDIS Computational
More informationModeling of Earth Surface Dynamics and Related Problems Using OpenFOAM
CSDMS 2013 Meeting Modeling of Earth Surface Dynamics and Related Problems Using OpenFOAM Xiaofeng Liu, Ph.D., P.E. Assistant Professor Department of Civil and Environmental Engineering University of Texas
More informationDesign and Analysis of Engine Cooling Fan
International Journal of Current Engineering and Technology ISSN 2277-4106 2014 INPRESSCO. All Rights Reserved. Available at http://inpressco.com/category/ijcet Research Article Design and Analysis of
More information2005 WJTA American Waterjet Conference August 21-23, 2005 Houston, Texas Paper SAFE WATERJET CLEANING OF STEEL PROCESS LINES
25 WJTA American Waterjet Conference August 21-23, 25 Houston, Texas Paper SAFE WATERJET CLEANING OF STEEL PROCESS LINES D. Wright, J. Wolgamott, G. Zink StoneAge, Inc. Durango, Colorado, U.S.A. ABSTRACT
More informationCASL-U-2013-0193-000
L3:THM.CFD.P7.06 Implementation and validation of the new RPI boiling models using STAR-CCM+ as CFD Platform Victor Petrov, Annalisa Manera UMICH September 30, 2013 EXECUTIVE SUMMARY This milestone is
More informationBusiness Ethics and Risk Management
ARBEITSGRUPPE FÜR WIRTSCHAFTSETHIK UND WIRTSCHAFTSKULTUR DER DEUTSCHEN GESELLSCHAFT FÜR PHILOSOPHIE WORKING GROUP BUSINESS ETHICS AND BUSINESS CULTURE, GERMAN PHILOSOPHICAL ASSOCIATION IN COOPERATION WITH
More informationTurbulence Modeling in CFD Simulation of Intake Manifold for a 4 Cylinder Engine
HEFAT2012 9 th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 16 18 July 2012 Malta Turbulence Modeling in CFD Simulation of Intake Manifold for a 4 Cylinder Engine Dr MK
More informationGraduate Schools, Doctoral Programmes and Research Training Groups at TU9 Universities
The alliance of the leading Institutes of in Germany RWTH Aachen TU Berlin TU Braunschweig Leibniz Universität Hannover Graduate Schools, Doctoral Programmes and Research Training Groups at TU9 Universities
More informationLES SIMULATION OF A DEVOLATILIZATION EXPERIMENT ON THE IPFR FACILITY
LES SIMULATION OF A DEVOLATILIZATION EXPERIMENT ON THE IPFR FACILITY F. Donato*, G. Rossi**, B. Favini**, E. Giacomazzi*, D. Cecere* F.R. Picchia*, N.M.S. Arcidiacono filippo.donato@enea.it * ENEA-UTTEI/COMSO
More informationCFD Based Air Flow and Contamination Modeling of Subway Stations
CFD Based Air Flow and Contamination Modeling of Subway Stations Greg Byrne Center for Nonlinear Science, Georgia Institute of Technology Fernando Camelli Center for Computational Fluid Dynamics, George
More informationCFD Modelling of Wet Flue Gas Desulphurization (WFGD) Unit: A New Era of Process System Control and Optimization
CFD Modelling of Wet Flue Gas Desulphurization (WFGD) Unit: A New Era of Process System Control and Optimization A. Arif, R. C. Everson, H. W. J. P. Neomagus Emission Control North-West University, Potchefstroom
More informationAerodynamic Department Institute of Aviation. Adam Dziubiński CFD group FLUENT
Adam Dziubiński CFD group IoA FLUENT Content Fluent CFD software 1. Short description of main features of Fluent 2. Examples of usage in CESAR Analysis of flow around an airfoil with a flap: VZLU + ILL4xx
More informationCurriculum Structure for Master of Engineering in Mechanical Engineering Degree Program (2013) Chiang Mai University Plan A1 Degree Requirements
Curriculum Structure for Master of Engineering in Mechanical Engineering Degree Program (2013) Chiang Mai University Plan A1 Degree Requirements Total: 36 credits Curriculum Structure: A. Thesis 36 credits
More informationDIPE: DETERMINATION OF INPUT PARAMETERS UNCERTAINTIES METHODOLOGY APPLIED TO CATHARE V2.5_1 THERMAL-HYDRAULICS CODE
5th International Conference on Nuclear Engineering Nagoya, Japan, April 22-26, 27 ICONE5-224 DIPE: DETERMINATION OF INPUT PARAMETERS UNCERTAINTIES METHODOLOGY APPLIED TO CATHARE V2.5_ THERMAL-HYDRAULICS
More informationGraduate Courses in Mechanical Engineering
Graduate Courses in Mechanical Engineering MEEG 501 ADVANCED MECHANICAL ENGINEERING ANALYSIS An advanced, unified approach to the solution of mechanical engineering problems, with emphasis on the formulation
More informationINTERNATIONAL JOURNAL OF RESEARCH IN AERONAUTICAL AND MECHANICAL ENGINEERING
ISSN (ONLINE): 2321-3051 INTERNATIONAL JOURNAL OF RESEARCH IN AERONAUTICAL AND MECHANICAL ENGINEERING Study of forced convection heat transfer With DAQ & ANSYS First Authors Moopanar karthikeyan 1, Raote
More informationNUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES
Vol. XX 2012 No. 4 28 34 J. ŠIMIČEK O. HUBOVÁ NUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES Jozef ŠIMIČEK email: jozef.simicek@stuba.sk Research field: Statics and Dynamics Fluids mechanics
More informationUse of OpenFoam in a CFD analysis of a finger type slug catcher. Dynaflow Conference 2011 January 13 2011, Rotterdam, the Netherlands
Use of OpenFoam in a CFD analysis of a finger type slug catcher Dynaflow Conference 2011 January 13 2011, Rotterdam, the Netherlands Agenda Project background Analytical analysis of two-phase flow regimes
More informationMinor losses include head losses through/past hydrants, couplers, valves,
Lecture 10 Minor Losses & Pressure Requirements I. Minor Losses Minor (or fitting, or local ) hydraulic losses along pipes can often be estimated as a function of the velocity head of the water within
More informationCOURSE PROGRAM. Isolato 47 - Politecnico di Bari. in Bari, Italy. September 21-24, 2015. Grande Albergo delle Nazioni.
COURSE PROGRAM Isolato 47 - Politecnico di Bari in Bari, Italy September 21-24, 2015 Grande Albergo delle Nazioni in Bari, Italy BARI AUTOMOTIVE SUMMER SCHOOL Centro Studi Componenti per Veicoli SpA (BOSCH
More informationExtension of the OpenFOAM CFD tool set for modelling multiphase flow
Extension of the OpenFOAM CFD tool set for modelling multiphase flow Ridhwaan Suliman Johan Heyns Oliver Oxtoby Advanced Computational Methods Research Group, CSIR South Africa CHPC National Meeting, Durban,
More informationCBE 6333, R. Levicky 1 Review of Fluid Mechanics Terminology
CBE 6333, R. Levicky 1 Review of Fluid Mechanics Terminology The Continuum Hypothesis: We will regard macroscopic behavior of fluids as if the fluids are perfectly continuous in structure. In reality,
More informationVALIDATION, MODELING, AND SCALE-UP OF CHEMICAL LOOPING COMBUSTION WITH OXYGEN UNCOUPLING
VALIDATION, MODELING, AND SCALE-UP OF CHEMICAL LOOPING COMBUSTION WITH OXYGEN UNCOUPLING A research program funded by the University of Wyoming School of Energy Resources Executive Summary Principal Investigator:
More informationDevelopment of Ventilation Strategy in Diesel Engine Power Plant by Using CFD Modelling
Development of Ventilation Strategy in Diesel Engine Power Plant by Using CFD Modelling Panu Mustakallio and Risto Kosonen Halton Oy, Haltonintie 1-3, 47400 Kausala, Finland E-mail: panu.mustakallio@halton.com
More informationVerfahrenstechnik und Chemieingenieurwesen
Verfahrenstechnik und Chemieingenieurwesen Qualification Frames and Curricula for Degree Courses for Process Engineering, Chemical Engineering and Biomolecular or Bioprocess Engineering at Universities
More information