DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE. November 15-19, 2015 Pittsburgh, PA, USA. Technical Program
|
|
|
- Trevor Harrison
- 8 years ago
- Views:
Transcription
1 DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE November 15-19, 2015 Pittsburgh, PA, USA Technical Program
2 Corrosion Policy Track: Topic: Corrosion Management T.S. NAVAIR Corrosion & Wear Science & Technology (S & T) Roadmap Updating & implementing the USAF Corrosion Prevention & Control Strategic Plan Exemplary Case Studies in Materials Protection of Military Equipment Topic: Corrosion Prevention & Control Strategies T.S. Modernization of Assault Amphibious Vehicles Test & Evaluation of Corrosion-Mitigating Covers Topic: Technology, Transitions & Evaluations: Practices & Testing Subsession Protection of Corrosion Under Paint by Nondestructive Methods Brake Fluid Development & Testing Topic: Technology, Transitions & Evaluations: Products Subsession High Temperature Resistant Thermal Spray Nonskid Coatings Improved Wiring Harness Design Topic: Education, Training & Fleet Support T.S. Corrosion & Environmental Degradation Awareness for Junior Military Officers Development of Standard Skill package for NAVAIR Corrosion & Wear Corrosion Science Track: Topic: Corrosion Modeling- General Models Subsession Computational Design of Material Systems Operating in a Corrosive Environment Mechanistic Modeling of Biocorrosion Predicting Corrosion & Durability Impact on material & Coating Choice on Military Procurement Topic: Corrosion Modeling- Material Specific Subsession Modeling the Atmospheric Corrosion of Aircraft Aluminum Alloys Modeling Studies to Determine Critical Conditions for Stainless Steel Pitting & Repassivation DoD Conference Technical Program 1
3 Topic: Corrosion Fundamentals T.S. De-Sensitization of AA5456 Alloy Plate with Pulsed Electron Beam The Influence of Acidic conditions in Erosion-Corrosion Behaviour of UNS G10400 & UNS S32760 Topic: Corrosion Inhibitors T.S. Corrosion Protection In & Beyond an Adhesive Bondline The Effect of Corrosion Inhibitors on the Corrosion Fatique of Aircraft Aluminum Alloys Student Research in Progress- Subsession A Concurrent Student Poster Sessions: Milton Levy Corrosion Science Category Robert Ferrara Corrosion Engineering Category Richard Kinzie Applied Corrosion Technology Category Thursday Morning Technical Session Agenda Student Research in Progress- Subsession B Thursday Afternoon Technical Session Agenda Student Research in Progress- Subsession C Corrosion Technology Track I: Topic: Accelerated & Outdoor Exposure Testing-Metallics Subsession Improved Accelerated Corrosion Testing of Steel & AA5083 Environment Assisted Cracking Measurements in Accelerated & Outdoor Corrosion Tests Topic: Accelerated & Outdoor Exposure Testing-Coatings Subsession Optimization of Accelerated Weathering Protocols Based on Service Environment Humidity Conditions A Comparative Study of Two Coating Systems Exposed for 2 Years in the Field & in Accelerated Atmosphere Chambers Topic: Corrosion Monitoring & Assessment T.S. - I Detection Methodologies for Early on-start Corrosion of Metal Structures Field Testing of a Corrosion Prediction Health management System for Military Aircraft Aircraft Corrosion Monitoring & Data Visualization Techniques for Condition Based Maintenance DoD Conference Technical Program 2
4 Topic: Corrosion Monitoring & Assessment T.S. - II Measurements for Enhanced Materials Corrosion Testing Portable Electrochemical Impedance Spectroscopy as a Coating Health Monitor Topic: Environmental Degradation of Advanced & Traditional Engineering Materials Overviews of Corrosion of Synthetic Materials: Metallic & Polymeric Composite Materials Overviews of Corrosion of Natural Materials: Concrete, Asphalt & Wood Corrosion Technology Track II: Topic: Paints and Coatings- Primers Subsession Reducing Stress-Corrosion Cracking with an Aluminum-Rich Primer Non-Chromate Aerosol Touchup of Aerospace Primers Topic: Paints and Coatings- Systems Subsession USN Coating Systems Compilation Study Bondable Flourinated Barrier Coatings on Oxidized Magnesium Surfaces for Corrosion Protection Single-Component Polysiloxane Topcoats for Navy Surface Ships & Aircraft Topic: Paints and Coatings- Special Coatings subsession SuperHydrophobic Post Treatment & Coating Extenders for Improved Asset Sustainability Testing & Evaluation of Multifunctional Smart Coatings Topic: Surface Preparation & Pretreatments T.S. Advances in surface Preparation Standards Impact of Pretreatments on AA2024-T351 Corrosion Protection by Magnesium Rich, Non-Chrome Primer Facilities and Infrastructures Track: Topic: Materials for Facilities & Infrastructures Geopolymer Mortar Liner System for Corrosion Protection & Rehabilitation of Storm Water Piping Advanced Fiber Reinforced Polymer Composites for Corrosion Mitigation in Infrastructure DoD Conference Technical Program 3
5 Facilities and Infrastructures Track continued : Topic: Protective Coatings and Treatments for Facilities & Infrastructures Selecting the Appropriate Coating for Facilities and Infrastructures Protective Treatments for New & Existing Concrete to Mitigate Corrosion Corrosion Resistant Materials Track: Thursday Morning Technical Session Agenda Topic: Corrosion Resistant Metallic Alloys T.S. Corrosion Response of Hybrid Friction Stir Weld Repairs of AA2139 Nanocrystalline Cobalt Phosphorous Coatings as a Hard Chrome Replacement Thursday Afternoon Technical Session Agenda Topic: Corrosion Resistant Ceramics, Non-Metals & Composites T.S. Non-Corrosive CFRP Reinforcement for USA Bridges DoD Conference Technical Program 4
ENVIRONMENTAL EFFECTS ON COATINGS
ENVIRONMENTAL EFFECTS ON COATINGS Surfaces exposed to the environment, may be damaged by elements such as water, snow, ice, heat, dirt, smog, humidity, brake dust, grime, salts, chemical attack, and acid
Using StrongPIPE Hybrid FRP for PCCP Rehab in Miami-Dade System
Using StrongPIPE Hybrid FRP for PCCP Rehab in Miami-Dade System Luis Aguiar Miami-Dade Water & Sewer Department Anna Pridmore, PhD Structural Technologies PROJECT BACKGROUND Miami-Dade Water & Sewer Department
SOLVING SECONDARY CONTAINMENT PROBLEMS
SOLVING SECONDARY CONTAINMENT PROBLEMS CEILCOTE CORROSION CONTROL PRODUCTS Leadership in Corrosion Problem Solving CEILCOTE As the pioneer and technological leader in polymer linings, coatings and flooring
Phosphoric Acid Anodized Aluminum Honeycomb
Phosphoric Acid Anodized Aluminum Honeycomb Description 02 and 06 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges. The HexWeb CR-PAA
Anodizing Reference Guide
Anodizing Reference Guide Type Thickness Type II Conventional coatings produced 1.8µ-25.4µ from sulfuric acid bath Type I A Conventional coatings produced 0.5µ-7.6µ (microns) from chromic acid bath Type
Alodine. EC 2 ElectroCeramic Coating. Engineered for the Forces of Nature
Alodine EC 2 ElectroCeramic Coating Alodine EC 2 ElectroCeramic Coating 2 www.henkelec2.com TABLE OF CONTENTS INTRODUCTION 3 AEROSPACE 4 ARCHITECTURAL COMPONENTS 6 AUTOMOTIVE ENGINES AND COMPONENTS 8 COOKWARE
Rehabilitation of corroded pipelines and pipes with FibaRoll
Rehabilitation of corroded pipelines and pipes with FibaRoll Available exclusively from FTi Ltd Adheres to steel High tensile strength High flexural strength Corrosion protection Cost effective Simple
STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM Installed in Pre-engineered Steel Buildings Provides Lowest Cost Construction Method for CORROSIVE AND WET Environments PREFERRED SOLUTIONS, INC.
PMCap Local Thin Area Repair and Restoration Component. for Pressure Retaining Items
by Paul S. Manzon President and John K. Wiedemann Vice President, Engineering PMC Engineering Solutions, Inc. 272 Grubb Rd. Pottstown, PA 19465 ABSTRACT A common method of pressure boundary repair for
- - - - Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner
The Kelly Klosure pre-framed modular panel has 4 components that are factory finished to create an easy and versatile bolt-together system in the field. Steel Panel Frame Exterior Steel Sheeting Optional
09990 MOLD REMEDIATION, LEAD-BASED PAINT ABATEMENT AND ENCASEMENT OF ASBESTOS
09990 MOLD REMEDIATION, LEAD-BASED PAINT ABATEMENT AND ENCASEMENT OF ASBESTOS PDS SE-160 01-2006 1. PRODUCT NAME SE-160 Clear Surface Coating (water-based copolymer) Specialty Elastomeric Topcoat 2. MANUFACTURER
Heat Exchanger Thin Film Foul Release Applications Corrosion Resistant Protective Coatings Grit Blast Surface Prep of Tubular Equipment
Heat Exchanger Thin Film Foul Release Applications Corrosion Resistant Protective Coatings Grit Blast Surface Prep of Tubular Equipment Non-Destructive Examination Heat Exchanger Mechanical Repair Services
Vapor Corrosion Inhibitors (VCIs) for Storage Tanks Corrosion Controlled Cost Controlled
Vapor Corrosion Inhibitors (VCIs) for Storage Tanks Corrosion Controlled Cost Controlled Presented by Kelly Baker, Zerust Oil & Gas Efim Lyublinski, Monique Posner, Terry Natale, Yefim Vaks, Ronnie Singh
Corrosion in offshore wind energy. a major issue. Harald van der Mijle Meijer
Corrosion in offshore wind energy a major issue Harald van der Mijle Meijer Corrosion in offshore wind energy A major issue Introduction TNO Den Helder What are the relevant types of corrosion? How to
Handling Corrosive or Abrasive Liquids
Handling Corrosive or Abrasive Liquids Defining abrasion and corrosion An abrasive liquid is one that has particles in it. Some, like inks, have very fine particles, while others, like some paints, contain
AdMaS centre Structure of the centre: Development of Advanced Building Materials Development of Advanced Structures and Technologies
AdMaS centre (Advanced Materials, Structures and Technologies) is modern science centre and complex civil engineering research institution affiliated to the Faculty of Civil Engineering, Brno University
CATHODIC PROTECTION SYSTEM DESIGN
CATHODIC PROTECTION SYSTEM DESIGN Presented By DENIS L ROSSI P.E. CORROSION ENGINEER New England C P Inc. Corrosion Fundamentals What is corrosion? It is defined as the degradation or deterioration of
MARTIN TESTING LABORATORIES (MTL) PAINTS AND COATINGS TESTING CAPABILITIES
Liquid Coating Properties Composition VOC Content, ASTM D2369 Water Content, ASTM D4017 Physical Properties Calculating Physical Constants of Coatings, ASTM D5201 Density, ASTM D1475 Flash Point, ASTM
Aircraft Cleanability and Corrosion Issues 26 February 2008. Craig Matzdorf NAVAIR
Aircraft Cleanability and Corrosion Issues 26 February 2008 Craig Matzdorf NAVAIR Report Documentation Page Form Approved OMB No. 0704-0188 Public reporting burden for the collection of information is
ZINCROLYTE VS DUPLEX 700
TEST REPORT Date: 03-05-2012 Reference: Duroc NV Corrosion Protection Moerelei 149 2610 Antwerp Belgium Written by: Ing. Martijn Wirken - mw@duroc.be ZINCROLYTE VS DUPLEX 700 This document is not legally
Building Owners Guide to a Duro-Last System!
Building Owners Guide to a Duro-Last System Table of Contents Section 1: Introduction to Duro-Last Roofing Systems Section 2: Benefits of a Duro-Last Roofing System Section 3: Comparing a Duro-Last Roof
Polyurea Coatings in Secondary Containment with National Technical Approval. Jürgen Magner Kiwa Polymer Institut Flörsheim / Germany
Polyurea Coatings in Secondary Containment with National Technical Approval Jürgen Magner Kiwa Polymer Institut Flörsheim / Germany concrete substrate high rack tanks organic coating secondary containment
family of products is really Reichhold s answer to the growing need to meet more stringent regulations and performance requirements.
Alkyd performance. Water cleanup. Beckosol AQ is a new platform of low VOC alkyd latex resins made from renewable resources. We take conventional alkyd chemistry and emulsify it in water to deliver a unique
SECTION 05 7360 ALUMINUM HANDRAIL AND RAILING SYSTEMS WITH DECORATIVE METAL PANEL INFILLS
1 SECTION 05 7360 ALUMINUM HANDRAIL AND RAILING SYSTEMS WITH DECORATIVE METAL PANEL INFILLS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and
Introduction to Standards and Nondestructive Testing of Industrial Materials
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. KEY CONCEPTS 17 Introduction to Standards and Nondestructive Testing of Industrial Materials
RESIDENTIAL ROOFING & RE-ROOFING, ROOF VENTILATION AND ROOF SHEATHING REQUIREMENTS MICHIGAN RESIDENTIAL CODE 2000
RESIDENTIAL ROOFING & RE-ROOFING, ROOF VENTILATION AND ROOF SHEATHING REQUIREMENTS MICHIGAN RESIDENTIAL CODE 2000 SECTION R905 REQUIREMENTS FOR ROOF COVERINGS R905.1 Roof covering application. Roof coverings
Alodine EC 2 The Principle of Protection
White Paper Alodine EC 2 The Principle of Protection Providing cost effective protection and improvement for aluminum parts used in extreme environments Contact American Trim, LLC 1005 W. Grand Ave. Lima,
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES. July 1, 2008 Revision 2
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES 1 PART 1 - GENERAL 1.0 GENERAL 1.1 REFERENCES: SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED FIBERGLASS
Radioactive Waste Storage Facility and Tank System Design Criteria Standards
UCRL-AR-133355 Rev 1 Radioactive Waste Storage Facility and Tank System Design Criteria Standards John Wood Rich Michalik Karen Doiron May 1999 DISCLAIMER This document was prepared as an account of work
CLICKBOND FASTENER OVERVIEW:
Infastech Pty Ltd A.B.N. 98 000 482 986 A.C.N. 000 482 986 891 Wellington Road, Rowville, Victoria, 3178 Telephone: (03) 9765 6400 Fax (03) 9765 6444 CLICKBOND FASTENER OVERVIEW: The CLICKBOND fastening
Specifications for Programs: 737, 747, 757, 767, 777, 787
= Performed by GKN BAC 5000 AN General Sealing 6-262, 6-265, 6-267, 6-270 PSD for 787 Only: 6-242, 6-269, 6-271 PSD for 777 Only: 6-261,6-264, 6-266, 6-269, 6-271 BAC 5004 L Installation of Permanent Fasteners
Atomic Structure. Atoms consist of: Nucleus: Electrons Atom is electrically balanced equal electrons and protons. Protons Neutrons
Basics of Corrosion Performance Metals Sacrificial anode manufacturer Specialize in aluminum alloy anodes All products made in the USA (Berks county, PA) ISO9001/2001 Certified Quality System Also traditional
Adhesive bonding technology. Adhesive bonding in transportation construction. Intelligent solutions for transportation construction
Adhesive bonding technology Adhesive bonding in transportation construction Intelligent solutions for transportation construction Content New opportunities in 1 transportation construction Reliable bonding
External Wrapping of Steel Riser Pipe. Case Study HJ3 CS200902
External Wrapping of Steel Riser Pipe Case Study HJ3 CS200902 Introduction Refineries process a wide variety of petroleum products. As part of the process, they rely on cooling towers, which recycle water
STADIUM Software Overview. Durability and Service Life of Concrete Structures
STADIUM Software Overview Durability and Service Life of Concrete Structures Eric Samson Cementitious Barriers Partnership SIMCO Technologies Inc. August 2014 Who we are SIMCO is a specialized engineering
Are these noise cancelling devices needed to make your chiller quiet??
Are these noise cancelling devices needed to make your chiller quiet?? Not on this chiller! Some sound barriers should never be broken. Government authorities recommend that exposure to loud noise over
Electronic Materials able to detect, amplify and transmit electrical signals in a complex manner are light weight, compact and energy efficient
CHAPTER 1 Knowledge and Comprehension Problems: 1.1 What are the main classes of engineering materials? Answer1.1: Metallic, polymeric, ceramic, composite, and electronic materials are the five main classes.
2009-12-23 ICS: 93.160. Strengthening retrofitting of reinforced concrete structures by gluing of fibre reinforced polymeric fabrics (FRP fabrics)
36888 ежглеяис тгс йубеямгсеыс (теувос еутеяо) 20091223 ICS: 93160 150114010801:2009 H HELLENIC CHNICAL SPECIFICATION (FRP ) Strengthening retrofitting of reinforced concrete structures by gluing of fibre
Crimp Tooling Where Form Meets Function
Crimp Tooling Where Form Meets Function Quality, cost, and throughput are key attributes for any production process. The crimp termination process is no exception. Many variables contribute to the results.
GENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,
Dissimilar Metal Corrosion
PDHonline Course S118 (1 PDH) Dissimilar Metal Corrosion Instructor: D. Matthew Stuart, P.E., S.E., F.ASCE, F.SEI, SECB, MgtEng 2013 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
HSE Information Sheet. Advice on acceptance criteria for damaged Passive Fire Protection (PFP) Coatings. Offshore Information Sheet No.
HSE Information Sheet Advice on acceptance criteria for damaged Passive Fire Protection (PFP) Coatings Offshore Information Sheet No. 12/2007 Introduction...2 Background...2 Additional information...3
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended
The use of Keronite surface treatment technology in the automotive industry
The use of Keronite surface treatment technology in the automotive industry Lars Olrik Keronite International Ltd 2006 International Conference on GREEN SURFACING TECHNOLOGY 18 July 2006 The Keronite mission
Meeting the Challenge of Pipeline Emergency Repair
Meeting the Challenge of Pipeline Emergency Repair Michael R. McReynolds, PE, SE 1 Tao Peng, PE, SE 2 ABSTRACTS The Metropolitan Water District of Southern California (MWD) is the nation s largest provider
New Cable Tie Type Classifications
1 New Cable Tie Type Classifications UL 62275 United States CSA C22.2 No. 62275 Canada NMX-J-623-ANCE Mexico Technically Equivalent to IEC 62275 All cable ties are not created equal!!! With an increasing
Alternative Fuels. Overview
Alternative Fuels Overview 01 our COMPAny TRANSFORMATIONAL GROWTH in value-added steel processing, pressure cylinders and heavy equipment cab manufacturing. For fiscal 2014, the Company had $3.1 billion
BELZONA KNOW-HOW VALVES, PIPES AND FITTINGS BELZONA VPF SYSTEM SELECTOR BELZONA KNOW-HOW FOR VALVES, PIPES AND FITTINGS
KNOW-HOW FOR THE REPAIR, RENOVATION AND RECLAMATION OF VALVES, PIPES AND FITTINGS B E L Z O N A V P F VPF SYSTEM SELECTOR FOR VALVES, PIPES AND FITTINGS SYSTEM Belzona VPF-1 Belzona VPF-2 Belzona VPF-3
and LUMINOUS CHEMICAL VAPOR DEPOSITION INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A.
LUMINOUS CHEMICAL VAPOR DEPOSITION and INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A. MARCEL MARCEL DEKKER. NEW YORK DEKKER Contents Preface iii Part I.
ALLOY C276 DATA SHEET
ALLOY C276 DATA SHEET //// Alloy C276 (UNS designation N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy known for its corrosion resistance in a wide range of aggressive media. It is one of the
Additive Manufacturing applications in Aerospace, Automotive, Robotics and beyond
Additive Manufacturing applications in Aerospace, Automotive, Robotics and beyond JGIF 2015 Tokio, 9th of November 2015 Joachim Zettler Airbus Apworks GmbH Airbus APWorks Founded in 2013 A perfectly harmonized
Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete
Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete Ming-Gin Lee 1,a, Yi-Shuo Huang 1,b 1 Department of Construction Engineering, Chaoyang University of Technology,Taichung
ATI 2205 ATI 2205. Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)
ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly
Gas Turbine Metallurgy, Coatings and Repair Technology Workshop May 2 nd, 2010
Gas Turbine Metallurgy, Coatings and Repair Technology Workshop May 2 nd, 2010 ITSC 2010 Singapore May 3-5, 2010 Fairmont Singapore Raffles City Convention Centre Course Instructors Jeff Smith Materials
CLEAN 1. Cleaning and Degreasing Agents. Universal cleaning and degreasing agent
Cleaning and Degreasing Agents CLEAN 1 1 02.0020 Universal cleaning and degreasing agent Specifications: Unique degreasing and cleaning capability Strong enough product flow during application Dries quickly,
LIFE CYCLE COST. The measurement of coating performance must be viewed from two perspectives Laboratory Conditions versus Real World Conditions.
Prospective water tank owners have a multitude of options and details when planning the construction of a new storage tank. The following Comparison illustrates the differences between both Bolted Steel
Sapa: SECTION 05520 ARCHITECTURAL ALUMINUM HANDRAILS AND RAILINGS
PART 1 GENERAL Sapa: SECTION 05520 ARCHITECTURAL ALUMINUM HANDRAILS AND RAILINGS 1.1 SECTION INCLUDES A. Aluminum and Glass Handrails B. Aluminum Railings 1.2 RELATED SECTIONS A. Section 05700 - Ornamental
Advanced Surface Repair Capabilities
m Advanced Surface Repair Capabilities 1 m Moog is a global designer, manufacturer and integrator of precision motion control products and systems. Over the past 60 years, we have developed a reputation
Departments and Specializations
Departments and Specializations Department Post Specialization Areas Aerospace Engineering: Only candidates with a clear focus on one or more of the specified areas will be considered Experimental Structural
Durability and Service Life
Chapter 7 Durability and Service Life Lester H. Gabriel, Ph.D., P.E. DURABILITY AND SERVICE LIFE Durability of Drainage Pipes Durability is the property to resist erosion, material degradation and subsequent
COMMERCIALIZATION Brochure
COMMERCIALIZATION Brochure United States small businesses are the engine of innovation and economic stability and will undoubtedly be a major factor in our economic recovery. Each year small businesses
Structural Failures Cost Lives and Time
Structural Failures Cost Lives and Time Recent failures of storage bins, silos and other structures highlight the need to increase awareness of hazards associated with these structures. Since 2010, one
SPREFIX SPRAY INSULATION _ in the marine market.
SPREFIX SPRAY INSULATION _ in the marine market. A self-adhesive glass or stone wool, sprayed directly onto surface.. Easily applied to wood, steel, plastic or other surfaces without any mechanical fasteners
Structural Testing of GeoPolymer Pipe/Culvert Lining
Structural Testing of GeoPolymer Pipe/Culvert Lining Joseph Royer, Ph.D. October 27 th, 2015 What is a GeoPolymer? Not a Plastic Not HDPE/PVC/Epoxy Looks and feels like cement Workability Material Properties
Prestressed Concrete Pipe Fitness for Service and Repair
Prestressed Concrete Pipe Fitness for Service and Repair Rasko Ojdrovic rpojdrovic@sgh.com 781-907-9231 IAEA - EPRI 15 October 2014 www.sgh.com SGH Pipeline Experience More than 25 years of research, analysis,
Hexavalent Chrome Removal in Aircraft Painting Schemes
Technical Workshop C3P & NASA 2007 Escola Superior de Tecnologia do Mar Peniche, Portugal Hexavalent Chrome Removal in Aircraft Painting Schemes Joana Vide Pereira - C3P November 9, 2007 Scope Aeronautical
Bridge Type Selection
Bridge Type Selection The major consideration for bridge type selection for bridges on the State Aid system is initial cost. Future maintenance costs, construction time, and location are considered when
R&D Services Knowledge transfer
R&D Services Knowledge transfer Training Offer - November 2009 OCAS : a joint venture between ArcelorMittal and the Flemish Region R&D Knowledge transfer - Scope Market-oriented knowledge transfer in the
Waterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries
Waterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries Introduction Wastewater of petrochemical industries and refineries contains high amounts of emulsified aliphatic or
CULVERT AND STORM SEWER PIPE MATERIAL POLICY ON FEDERALLY FUNDED LOCAL AGENCY PROJECTS UPDATED March 2013
CULVERT AND STORM SEWER PIPE MATERIAL POLICY ON FEDERALLY FUNDED LOCAL AGENCY PROJECTS UPDATED March 2013 Background Section 5514, a final rule for SAFETEA-LU was issued on November 15, 2006 and became
Best Available Technology for Sodium Hypochlorite Storage Tanks
Best Available Technology for Sodium Hypochlorite Storage Tanks Michael G. Stevens, Senior Staff Scientist, Ashland Inc. Paul Cohen, Diamond Fiberglass ABSTRACT Sodium hypochlorite disinfection has become
A SHORT INTRODUCTION TO CORROSION AND ITS CONTROL
A SHORT INTRODUCTION TO CORROSION AND ITS CONTROL CORROSION OF METALS AND ITS PREVENTION WHAT IS CORROSION Corrosion is the deterioration of materials by chemical interaction with their environment. The
STRAIN GAGE INSTALLATION HOLE DRILLING
Via Delle Calandre 63 50041 Calenzano (Florence) Italy Tel: +39.055.8826-302 Fax: -303 www.sintechnology.com info@sintechnology.com STRAIN GAGE INSTALLATION HOLE DRILLING How to install strain gages for
WATERPROOFING OF WET ROOMS
WATERPROOFING OF WET ROOMS Waterproofing under tiles For longterm enjoyment of a wetroom area a complete and resistant waterproofing system is an important precondition. Most tiles are by themselves waterproof
Zero (VOC) Structural Epoxy Rehabilitation of Steel and Concrete Tanks, Pipes and Structures
Zero (VOC) Structural Epoxy Rehabilitation of Steel and Concrete Tanks, Pipes and Structures Danny R. Warren Warren Environmental, Inc. P.O. Box 1206 Carver, MA 02330 ABSTRACT The effects of time and environmental
Projects and R&D activities
Projects and R&D activities J.M. Jimenez On behalf of the Vacuum, Surface and Coatings Group (VSC) Vacuum, Surface and Coatings group* Mandate Design, construction, operation, maintenance and upgrade of
Houston Plating & Coatings
Houston Plating & Coatings Electroless Nickel SBN QPQ TM Teflon Coating Polyurethane Multi-Coat Epoxy System Dry Film Lubricant Phosphate and Oil Xylan Fluoropolymer Molybdenum Disulfide Houston Plating
Chapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
June 2007 CHAPTER 7 - CULVERTS 7.0 CHAPTER 7 - CULVERTS 7.1 GENERAL
7.0 7.1 GENERAL For the purpose of this manual, culverts are defined as structures that are completely surrounded by soil and located below the surface of the roadway parallel to the general direction
Nigerian Journal of Technology, Vol. 23, No. 1, March 2004 Enetanya 10 CORROSION RESPONSE OF LOW CARBON STEEL IN TROPICAL ROAD MUD
Nigerian Journal of Technology, Vol. 23, No. 1, March 2004 Enetanya 10 CORROSION RESPONSE OF LOW CARBON STEEL IN TROPICAL ROAD MUD A.N.Enetanya Department of Mechanical Engineering, University of Nigeria,
High Performance PSA in Sheet Membrane in Water Protection
High Performance PSA in Sheet Membrane in Water Protection Xia Cao, Senior R&D Chemist, W. R. Grace, Cambridge MA 02140 Jyoti Seth, Strategic Program Leader, W. R. Grace, Cambridge MA 02140 Concrete is
DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS
DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS NOTICE TO BIDDERS BID FORM INSTRUCTIONS TO BIDDERS CONTRACTOR S BID FOR PUBLIC WORK - FORM 96 MINORITY AND WOMEN S BUSINESS ENTERPRISE PARTICIPATION
Precision components from start to finish. Excellence. in performance-critical machining & fabrications
Precision components from start to finish Excellence in performance-critical machining & fabrications Leading precision machining technology... Fully integrated solutions Facilities and capabilities The
HexWeb CR III Corrosion Resistant Specification Grade Aluminum Honeycomb
Corrosion Resistant Specification Grade Aluminum Honeycomb Description 5052 and 5056 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges.
Oil and Gas Pipeline Design, Maintenance and Repair
Oil and Gas Pipeline Design, Maintenance and Repair Dr. Abdel-Alim Hashem Professor of Petroleum Engineering Mining, Petroleum & Metallurgical Eng. Dept. Faculty of Engineering Cairo University aelsayed@mail.eng.cu.edu.eg
07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying
Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 27 C calculated IED (2010/75/EU) (calculated)
Approved 402;2521 1 2521 zinc epoxy ^(ValidationDate). 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms
INDIAN STANDARDS (BIS) ON WELDING
** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding
INDEPENDENTS AIL RET 2012
RETAIL INDEPENDENTS 2012 Contents Introducing 2 new colours to the Hammerite range: Direct To Rust Metal Paint 4-5 Metalcare - Task Specific Products 6-7 Metalcare - Primers & Converters 8-9 Muted Clay
How To Make A Hot Melt Adhesive
Types of Bonding Physically hardening adhesives 2 2 Drying Adhesives They are made of polymers dissolved in solvent (Polychloroprene, Polyurethane) or dispersed in water (white glue based on PVA (Polyvinyl
High Performance Coating Systems THIOKOL. P r i m a r y a n d S e c o n d a r y C o n t a i n m e n t
THIOKOL High Performance Coating Systems FNEC 2515 RLP 2378+ P r i m a r y a n d S e c o n d a r y C o n t a i n m e n t The name THIOKOL has long been synonymous with elastomeric polysulfide based coatings
Profiles for floors of same height Cerfix Projoint
PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 (0)49 8878411 +39 (0)49 8878412 FAX. +39 (0)49-706692 EMAIL: INFO@PROFILPAS.COM s for floors of same height Cerfix Projoint Application
Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 34 C IED (2010/75/EU) (calculated)
408;21800;21820;21740;21760;21840 1,2 408 unsaturated vinyl ester ^(ValidationDate). 1 Product description This is a glass flake reinforced unsaturated vinyl ester coating. It is an ultra high build, extremely
1. PECVD in ORGANOSILICON FED PLASMAS
F. FRACASSI Department of Chemistry, University of Bari (Italy) Plasma Solution srl SURFACE MODIFICATION OF POLYMERS AND METALS WITH LOW TEMPERATURE PLASMA OUTLINE METAL TREATMENTS 1 low pressure PECVD
Surface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment
Surface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment Whatever You Rebuild, Repair and Protect...... Find the Right Solution! Henkel's Solutions for all Surface Engineering Needs
COMPOSITE MATERIALS. Asst. Prof. Dr. Ayşe KALEMTAŞ
COMPOSITE MATERIALS Office Hours: Tuesday, 16:30-17:30 akalemtas@mu.edu.tr, akalemtas@gmail.com Phone: +90 252 211 19 17 Metallurgical and Materials Engineering Department ISSUES TO ADDRESS Classification
Wecryl Waterproofing System under surfacing supplied by others
Brief description The Wecryl waterproofing system allows a high-quality, seamless and crack-bridging waterproofing layer to be installed under loose-laid or bonded surfacing supplied by others (stone slabs,
Removable Insulation Blankets from A to Z
Removable Insulation Blankets from A to Z At first glance, making up a removable insulation blanket seems somewhat simple take some insulation, put some mesh on one side, a cover on the other, sew them
Pressure Vessel Assessment Report
Project Information Client: Total Energy Location: Blackwell OK Date: 7/23/2013 Contact: Integrity Mgmt. Advisor: Chuck Easterbrooks - API 510 #2212 Cc: API / UT Inspector: Robert Van Pelt-API 510# 40899
BILL OF QUANTITY FOR THE WORK OF "REPAIRING OF CIVIL & PLUMBING WORKS INSIDE AND OUTSIDE OF THE WORKSHOP"
BILL OF QUANTITY FOR THE WORK OF "REPAIRING OF CIVIL & PLUMBING WORKS INSIDE AND OUTSIDE OF THE WORKSHOP" Sl. 1 DISMANTLING WORK 1.1 Stripping off worn out plaster (outside and inside) and raking out joints