SeptemberMMU. Material ConneXion
|
|
- Louisa Robertson
- 8 years ago
- Views:
Transcription
1 SeptemberMMU As part of our promise to provide our clients with the newest and most innovative materials sourced from around the world, we are pleased to present our monthly Materials Update. Here you will find the latest materials recently voted into our library through a jury selection process, which are now available on our database. These materials can be seen online and onsite at our New York location. Select materials are also available at our international locations; please call or us at any of the addresses listed for more information. Interested in these materials but not a client? Our subscription-based Materials Library is the world s largest library of advanced, innovative and sustainable materials and processes. With new materials added every month, our libraries around the world give you immediate access to 7,500+ materials onsite and online, as well as Material Specialists and Monthly Updates on what s new. Become a member of Material ConneXion today! To find out more about membership levels and benefits, contact us at: or access@materialconnexion.com Material ConneXion New York. Bangkok. Daegu. Milan. Skövde. Tokyo.
2 MC This liquid resin is comprised of urethane and acrylic monomers, which polymerize into rigid polymers when UV cured. For the of functional and visual prototypes, testing and medical components. MC Impact resistant polymer resin in a powdered format for selective laser sintering. The physical durability and strength of this polymer makes it suitable for sporting goods, housings and hinges. MC This PLA (polylactic acid) filament is wellsuited for home use, as low print-temperature polymers such as this have lower power draw and are safer to use. Intended for the 3D printing of toys and prototypes. MC ABS filament for use with filament extrusion 3D printers. This type of polymer provides the ability to print at low temperatures, while offering structural toughness and durability. MC Steel powder for use in direct metal laser sintering machines. Known as a Maraging steel, it has very good mechanical properties and is easily heat treatable, allowing for excellent hardness and strength. MC Stiff engineering plastic offered as a powder for selective laser sintering, an process. For parts which require particular stiffness, a high heat distortion temperature and low abrasive wear. MC Titanium-based metal alloy powder that is used for the selective laser sintering of fully dense engineering parts. Applications include prototypes and parts for aerospace, motorsports and biomedical implants. MC This ceramic filament is designed to be fired into fully ceramic pieces after printing. It is comprised of ceramic powder bound together by a thermoplastic polymer, for use with extrusionbased 3D printers. MC With 91% light transmission, toughness and ductility, this modified butadiene filament offers unique optical and physical properties and bends more than other printing filaments. MC Mineral-filled copolyester in filament form, compatible with machinery. The visual and textural effect can be tuned by adjusting the processing temperature during printing. MC Smooth and soft (soft-touch) film that is 50% more matte than standard matte films and has very good scuff resistance. For use in luxury packaging, book covers, brochures, labels or stationery. MC Smooth and soft film with a metallized effect achieved without the use of metallic inks. Intended for print media, it has excellent ink adhesion without requiring additional primers to protect the ink.
3 MC Decorative veneer fiber cement panel for wall coverings and exterior siding that mimics the look of woven textiles. It is durable, non-combustible and resistant to weathering, impact, rot, warping and shrinkage. MC Fiber cement panel that mimics the texture and color of wooden planks. Offering weight, cost and installationtime savings compared to the real thing. The panels are durable, non-combustible and resistant to weathering. MC Fiber cement panel with an uneven dimpled appearance, simulating the look and feel of concrete blocks, but in an easier to use plank format. Applications include architectural wall panels and exterior siding. MC Decorative veneer fiber cement panel with the rough texture and appearance of stacked stone. Offering weight, cost and installationtime savings compared to the real thing. The panels are durable and resistant to weathering. MC This additive manufacturing process utilizes the combination of powder-bed printing and heat sintering to produce high precision metal parts for the fashion, machinery, aerospace, dental and medical industries. MC Bronze particles in a PLA/PHA polymer blend and a filamnet form for home Fused Deposition Modeling (FDM) machines. This is the first instance of metal in a consumerlevel 3D printing material. MC Filament composed of 70% polylactic acid and 30% pinewood fibers. The filament is intended for additive manufacturing, enabling the creation of parts with the look, feel and aroma of wood. MC Phosphorescent raw material in a PLA/PHA polymer blend and a filament form, compatible with home Fused Deposition Modeling (FDM) machines. For consumer products, parts and novelties. MC A PLA and PHA blend in a filament form for 3D printers. This blend improves on the properties of pure PLA filaments with a reduction in brittleness and a correlated increase in toughness. MC A co-polyester filament with high clarity and improved strength, toughness, melt strength and dimensional stability over PLA. This lowodor material has been optimized for 3D printing. MC Self-lubricating polymer filament for the additive manufacturing of parts that require low friction properties. It is particularly suitable for dirty, underwater or cleanroom environments. MC A conductive filament comprised of carbon nanotube loaded ABS, which can be used in additive manufacturing. This loaded conductive polymer is suitable for electrical conduction and static dissipation.
4 MC A polycarbonate (PC) filament formatted for use with extrusion style 3D printing. This filament is water clear and colorless, and offers high strength, toughness, heat and impact resistance. MC Elastomeric filament comprised of a thermoplastic vulcanizate, a blend of polymers that exhibits some of the properties of vulcanized rubbers. It is intended for the 3D printing of products or parts. MC PLA filament for 3D printing. Usually a rigid polymer, this version features softness, flexibility and elasticity, as well as biodegradability and low temperature processing. MC Thermoplastic polyurethane (TPU) pellets for use with 3D printers, providing the rubbery feel and high flexibility typical of elastomers and allowing for a wider range of functional end products to be printed. MC High-density basket weave textile composed of 100% nylon as twisted multifilament yarns. The yarns keep the filaments together, reduce snagging and increase tensile and tear strength. MC High-density oxford weave textile composed of 100% polyester with a water repellent coating. The fabric is perforated and printed for decorative effect and increased air permeability. MC Dobby weave fabric composed of 100% nylon with a water repellent finish and an aluminized coating for decorative effect. Applications include bags, backpacks and motorsports apparel. MC High-performance polymer filled with carbon fibers. The use of a fiber-reinforced material with an process allows for lightweight, strong components with complex geometries. MC High-performance polymer filaments filled with carbon nanotubes that provide static dissipation, stiffness and tensile strength. For the printing of parts for aerospace, automotive and the engineering industries. MC Filament for additive manufacturing made of self-reinforcing polymer, offering comparable tensile strength, higher compressive strength and a lighter weight than fiber-reinforced composites. MC Nylon filament for. Printed parts made from this material are strong and have sufficient interlayer adhesion such that they can be processed in the same ways as a solid nylon block. MC Glass-like polyester filament with high strength and water clarity for use with 3D printers. It offers optical correctness and properties comparable to nylons, but with the lower processing temperature of PET.
5 MC Filament for extrusion style 3D printing comprised of nylon. This highly durable material exhibits the strength needed for use in functional parts and load bearing parts, even printed living hinges. MC Nylon in a filament format, compatible with extrusion-type 3D printers. Applications include printing of parts for mechanical testing, prosthesis, robotic assemblies and functional prototypes. MC Wood-filled PLA filament with the look, feel and acoustic properties of wood. The rheology of this material has been optimized for 3D printing, as it has a precise and reliable filament diameter. MC Photo-reactive liquid that is polymerized and solidified with exposure to UV light. This material is used with stereolithography additive maufacturing processes and is specially formulated for home use. MC Highly lustrous filament for additive manufacturing composed of PLA and proprietary fillers. Laying down the polymer in continuous layers further enhances the silk-like qualities of the material. MC Filament for additive manufacturing composed of PLA, lignin and proprietary mineral fillers. The material is biodegradable and once 3D printed has a linen-like appearance and feel.
6 Andrew H. Dent, PhD VP Library and Materials Research Material ConneXion T E adent@materialconnexion.com w materialconnexion.com Chompoonuj Weerakitti Director Library and Materials Research Material ConneXion Bangkok T +66 (0) E cweerakitti@materialconnexion.com w materialconnexion.com/th Sun Ah Kim Director Library and Consulting Material ConneXion Daegu T E sakim@materialconnexion.com w materialconnexion.com/kr Micol Costi Director Library and Materials Research Material ConneXion Italia T / E mcosti@materialconnexion.com w materialconnexion.com/it Anders Brietholtz Managing Director Material ConneXion Skövde T +46 (0) E abrietholtz@materialconnexion.com w se.materialconnexion.com A SANDOW Company 1271 Avenue of the Americas 17th Floor New York, NY T F Kumiko Yoshikawa Chief Operating Officer Material ConneXion Tokyo T +81 (0) E kyoshikawa@materialconnexion.com w materialconnexion.com/it materialconnexion.com
Tutorial: Rapid Prototyping Technologies
1. Introduction Tutorial: Rapid Prototyping Technologies Rapid prototyping (RP) is a new manufacturing technique that allows for fast fabrication of computer models designed with three-dimension (3D) computer
More informationNew Advances in Rapid Prototyping using Inkjet-based 3D Printing
New Advances in Rapid Prototyping using Inkjet-based 3D Printing April 2011 Objet Geometries Ltd. DISCLAIMER: Objet Geometries Ltd. ("Objet") does not guarantee the final release and availability of materials,
More informationRapid Prototyping Technologies. May, 2016
Rapid Prototyping Technologies May, 2016 WE HAVE ALL THE NECESSARY TOOLS TO ENSURE THE FINAL SUCCESS OF YOUR PROTOTYPE. Andaltec can help you in all the steps, from the design to fully finished prototype
More informationHow to Effectively Move from 3D Printing to Injection Molding. Tony Holtz Technical Specialist, Proto Labs
How to Effectively Move from 3D Printing to Injection Molding Tony Holtz Technical Specialist, Proto Labs Overview 3D Printing CNC Machining Injection Molding Design Considerations for Injection Molding
More informationRapid Prototyping. Training Objective
Training Objective After watching the program and reviewing this printed material, the viewer will understand the principles and practical applications of Rapid Prototyping. Basic concepts are explained
More informationBrief Report on machines available in the 3D Printers market and their characteristics
Brief Report on machines available in the 3D Printers market and their characteristics by AJIU Asociaciòn de investigacion de la industria del juguete, conexas y afines, Contenido 1. 3D PRINTING... 3 2.
More informationPROCESSING OF VARIOUS MATERIALS
4 PROCESSING OF VARIOUS MATERIALS CHAPTER CONTENTS 4.1 Shaping Processes for Polymers Polymers Manufacturing Processes for Polymers 4.2 Rubber Processing Technology Processing of rubber into finished good
More informationPrototyping Process Choosing the best process for your project
Prototyping Process Choosing the best process for your project Proto Labs, Inc. 5540 Pioneer Creek Dr. Maple Plain, MN 55359 P: (763) 479 3680 F: (763) 479 2679 www.protolabs.com 2009 Proto Labs. All rights
More informationAdvanced Manufacturing Choices
Advanced Manufacturing Choices MAE 195-MAE 156 Spring 2009, Dr. Marc Madou Class 8: Rapid Prototyping By Dr. Miodrag Micic, mmicic@mpbio.com Two Ways for Fabrication: Substractive manufacturing Additive
More informationRAPID PROTOTYPING. Learning Objectives: By the end of the lecture the student should be able to: Explain the fundamentals of Rapid Prototyping
RAPID PROTOTYPING Learning Objectives: By the end of the lecture the student should be able to: Explain the fundamentals of Rapid Prototyping Outline and explain differences of Rapid Prototyping Technologies
More informationAllison Rae Paramount Industries Rhode Island School of Design ID 87. Prototyping Overview
Allison Rae Paramount Industries Rhode Island School of Design ID 87 Prototyping Overview Prototyping for Mechanical Parts Paramount Industries Started as prototyping vendor, then added: Industrial Design
More informationWhether plastic, rubber, wood, metal or ceramic,
Material Guide A practical overview on 3D printing materials Whether plastic, rubber, wood, metal or ceramic, 3D printers can process a wide range of materials. In the following is a brief overview of
More informationGlossary. 3D Animation Using computer software to create and animate a three-dimensional representation of image data.
Glossary # 2D Control Drawing A line drawing showing various views of a product with details such as material, surface finish, volume, tolerances and critical dimensions. 3D Animation Using computer software
More informationRapid prototyping. CAD / lecture. October 5, 2010. TO&I Vermelding onderdeel organisatie
1 Rapid prototyping is: Rapid prototyping is an additive (layered) digital fabrication technology Layers of material are added forming the final 3d physical model The digital data of the virtual 3d model
More informationHow To Build A 3D Model From Scratch
SERVICES AND CAPABILITIES 1. Rapid prototyping What is rapid prototyping? Rapid prototyping (RP) or more recently Free Form Fabrication refers to the fabrication of a physical, three-dimensional part of
More informationNingbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes,
Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes, STEREOLITHOGRAPHY (SLA) Selective Laser Sintering (SLS) RTV MOLDING AND CAST URETHANE PROTOTYPES Tel : +86 574
More informationGLOBAL MANUFACTURING. ARAUJO, Anna Carla AUG, 2015 Mechanical Engineering Department POLI/COPPE/UFRJ
GLOBAL MANUFACTURING ARAUJO, Anna Carla AUG, 2015 Mechanical Engineering Department POLI/COPPE/UFRJ Workpiece Presentation Powder Metallurgy and Additive Manufacturing [#7] Powder Metallurgy PM parts can
More informationAdditive Manufacturing: Processes and Standard Terminology
Additive Manufacturing: Processes and Standard Terminology Gary Coykendall Copyright Edmonds Community College 2012; Permission granted for use and reproduction for educational purposes only. Abstract
More informationChapter 5 POWDER-BASED RAPID PROTOTYPING SYSTEMS
Chapter 5 POWDER-BASED RAPID PROTOTYPING SYSTEMS 5.1 3D SYSTEMS SELECTIVE LASER SINTERING (SLS) 5.1.1 Company 3D Systems Corporation was founded by Charles W. Hull and Raymond S. Freed in 1986. The founding
More informationBENEFITS OF 3D PRINTING VACUUM FORM MOLDS
WHITE PAPER BENEFITS OF 3D PRINTING VACUUM FORM MOLDS AUTHORS COLE HARTMAN (MECHANICAL ENGINEER) & VERONICA DE LA ROSA (INDUSTRIAL DESIGNER) FATHOM is driven by advanced technologies. We leverage our expertise
More informationThe Anatomy of a Label
The Anatomy of a Label Three key elements make up a label: face stock, release liner, and adhesive. Face Stock: Face stock is the material of the label that carries the imprint. The print can be applied
More informationChoosing The Proper Short Cut Fiber for Your Nonwoven Web
Choosing The Proper Short Cut Fiber for Your Nonwoven Web ABSTRACT You have decided that your web needs a synthetic fiber. There are three important factors that have to be considered: generic type, diameter,
More informationMaxCell Technical Manual Design Parameters
MaxCell Technical Manual Design Parameters Breaking Strength by Product Style, lbs Product Style Standard MaxCell Fire Resistant MaxCell Test Method 4 Cell 2,750 2,200 ASTM D 5 Bellcore 5 5.. Cell 2,50
More informationBuilding Owners Guide to a Duro-Last System!
Building Owners Guide to a Duro-Last System Table of Contents Section 1: Introduction to Duro-Last Roofing Systems Section 2: Benefits of a Duro-Last Roofing System Section 3: Comparing a Duro-Last Roof
More informationTool Design and Concurrent Engineering using Rapid Tooling Construction Methods
Section Number 3563 Tool Design and Concurrent Engineering using Rapid Tooling Construction Methods Nicole Hoekstra Engineering Technology Department Western Washington University Abstract Prior to rapid
More informationCOMPOSITE MATERIALS. Asst. Prof. Dr. Ayşe KALEMTAŞ
COMPOSITE MATERIALS Office Hours: Tuesday, 16:30-17:30 akalemtas@mu.edu.tr, akalemtas@gmail.com Phone: +90 252 211 19 17 Metallurgical and Materials Engineering Department ISSUES TO ADDRESS Classification
More informationADVANCED RAW MATERIALS
ADVANCED RAW MATERIALS FOR ADDITIVE MANUFACTURING Octobre 2015 Nouveau matériau polymère flexible pour le procédé d impression 3D par frittage laser WHO WE ARE ADVANC3D Materials is a privately owned and
More informationChoosing optimal rapid manufacturing process for thin-walled products using expert algorithm
Choosing optimal rapid manufacturing process for thin-walled products using expert algorithm Filip Górski, Wiesław Kuczko, Radosław Wichniarek, Adam Dudziak, Maciej Kowalski, Przemysław Zawadzki Poznan
More informationThermoplastic composites
Thermoplastic composites Definition By definition, a thermoplastic is a material based on polymer (macromolecular compound) which can be shaped, in a liquid (viscous) state at a temperature either higher
More informationCharacterization of Polymers Using TGA
application note Characterization of Polymers Using TGA W.J. Sichina, Marketing Manager Introduction Thermogravimetric analysis (TGA) is one of the members of the family of thermal analysis techniques
More information3D Printing & Medical Technology: New Risks & Potential for Liability Joe Coray, Vice President Corey LaFlamme, Assistant Vice President The Hartford
3D Printing & Medical Technology: New Risks & Potential for Liability Joe Coray, Vice President Corey LaFlamme, Assistant Vice President The Hartford http://www.thehartford.com/business-insurance/life-science-insurance
More informationIntroduction: Consumables - Part of the Identification System
Consumables - The Basics A presentation from: Introduction: Consumables - Part of the Identification System You have spent many hours researching, selecting, and getting approval for your new data collection
More informationRAPID PRODUCT DEVELOPMENT
Rapid Product Development and Rapid Prototyping service American Engineering Group (AEG) offer rapid product development service, a rapid and more costeffective solution for manufacturing. Bringing new
More informationProfiles On Display CERTIFIED ISO 9001:2000. Call Toll Free 1.800 279.0991 Canada 800.361.4774 Montreal 514.325.9840 www.plastifab.
From design to delivery Profiles On Display CERTIFIED ISO 9001:2000 Profiles On Display I n d u s t r i e s When Plastifab Industries and the former World Plastics combined their capabilities under one
More information1. Injection Molding (Thermoplastics)
1. Injection Molding (Thermoplastics) l Molding: Injection (thermoplastics) INJECTION MOLDING of thermoplastics is the equivalent of pressure die casting of metals. Molten polymer is injected under high
More informationApplications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT)
I Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT) Table of Content 1 Introduction...1 2 Improved Properties...1 3 Potential Applications...1 3.1 Current / short-term applications...3
More informationAs published in PIM International
As published in PIM International www.pim-international.com 64 Powder Injection Moulding International September 2012 Rapid prototyping of highperformance ceramics opens new opportunities for the CIM industry
More informationDispersion of Synthetic Fibers in Wet-Lay Nonwovens
Dispersion of Synthetic Fibers in Wet-Lay Nonwovens This article was written by James M. Keith, retired Director of Technical Services for MiniFIBERS, and published in the Tappi Journal, Vol. 77, No. 6,
More informationDetermining the Right Molding Process for Part Design
Determining the Right Molding Process for Part Design How RIM Molding Advantages Compare with Traditional Production Technologies Page 2 Introduction This White Paper details the part production processes
More informationDevelopment of an innovative bio-based structural adhesive
Development of an innovative bio-based structural adhesive Blanca Palomo, R&D Engineer blanca.palomo@rescoll.fr RESCOLL Independent research company located in Pessac (33) specialized in technologic innovation
More informationResistance of Plastics to Gamma Irradiation
Elastomers 1 MATERIAL TOLERANCE LEVEL (kgy) COMMENTS Butyl 50 Sheds particulate after irradiation. Ethylene Propylene 100 200 Crosslinks, yellows slightly. Diene Monomer (EPDM) Fluoro Elastomer 50 Avoid
More information3D Printing: The Next Industrial Revolution? A look into the impacts on the aerospace industry
3D Printing: The Next Industrial Revolution? A look into the impacts on the aerospace industry By Alan Kendrick, J.D., Nerac Analyst Additive manufacturing (AM), also referred to as 3D Printing, is a term
More informationChallenges and. Opportunities of. Digital Printing. Andreas Koch Managing Director Digital Division
Challenges and Opportunities of Digital Printing Andreas Koch Managing Director Digital Division Contents Why digital printing? The Marabu way Ink technologies Case study 2 Why digital printing? You can
More informationRadiation Curable Components and Their use in Hard, Scratch Resistant Coating Applications
Radiation Curable Components and Their use in Hard, Scratch Resistant Coating Applications William Schaeffer Steven Tyson Indu Vappala Robert Kensicki Sartomer USA, LLC 502 Thomas Jones Way Exton, PA 19343
More informationDESIGN OF MANUFACTURING SYSTEMS BY RAPID PROTOTYPING TECHNOLOGY APPLICATION
Annals of the University of Petroşani, Mechanical Engineering, 14 (2012), 104-111 104 DESIGN OF MANUFACTURING SYSTEMS BY RAPID PROTOTYPING TECHNOLOGY APPLICATION JOZEF NOVAK-MARCINCIN 1 Abstract: Rapid
More informationDIRECT PRINTING NYLON JACKETS. The Basics
DIRECT PRINTING NYLON JACKETS The Basics . The Nylon Jacket Types of Nylon There are three basic weaves that are commonly used to manufacture nylon jackets or outerwear. These are Taffeta, Satin and Oxford.
More informationWATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12
WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 87 88 GOOD INDUSTRY PRACTICES 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12.1 BACKGROUND Most roofs in Singapore are constructed using reinforced
More informationFused Deposition Modeling: A Technology Evaluation
Fused Deposition Modeling: A Technology Evaluation Todd Grimm T. A. Grimm & Associates, Inc. Selecting the best rapid prototyping process can be challenging. Without hands-on experience, uncovering both
More informationMATERIAL (R)EVOLUTION: ADDITIVE MANUFACTURING
MATERIAL (R)EVOLUTION: ADDITIVE MANUFACTURING 1 TABLE OF CONTENTS Introduction... 4 What is Additive Manufacturing Video... 5 Primary Methods of Additive Manufacturing... 6 State of the Industry... 17
More informationINSULATION FOR PRE-ENGINEERED METAL BUILDINGS. ROXUL SAFE 55 & 65 and ROXUL PLUS MB. Insulation for Pre-Engineered Metal Buildings
INSULATION FOR PRE-ENGINEERED METAL BUILDINGS ROXUL SAFE 55 & 65 and ROXUL PLUS MB Insulation for Pre-Engineered Metal Buildings ROXUL SAFE AND ROXUL PLUS MB Exterior Wall Insulation for Pre-Engineered
More informationColorado State University. Durrell Center Roof Repair
Colorado State University Durrell Center Roof Repair SPECIFICATION: POLYURETHANE FOAM ROOFING l.0 GENERAL REQUIREMENTS The successful application of a polyurethane foam roofing system is dependent upon
More informationPlastics and Polymer Business. Properties enhancement for Plastics
News Letter Vol. 18, issue October-December, 2012 Hyperdispersants and Coupling Agents for Thermoplastics and Thermosets Solplus, Ircolplus and Solsperse hyperdispersants and coupling agents have been
More informationIngeo Fibre Apparel Product Guidelines. Fiber to Fabric. 1. Introduction to Ingeo fibers 2. Fiber to yarn 3. yarn to fabric
Ingeo Fibre Apparel Product Guidelines Fiber to Fabric 1. Introduction to Ingeo fibers 2. Fiber to yarn 3. yarn to fabric Apparel Products 1. Introduction to Ingeo fibers Ingeo fibre The only synthetic
More informationModule 3: Sewer Material Lecture 3: Sewer Material
Module 3: Sewer Material Lecture 3: Sewer Material [NPTEL, IIT Kharagpur, Prof. M.M.Ghangrekar, Department of Civil Engineering Page 1 3.0 SEWER MATERIAL 3.1 Important Factors Considered for Selecting
More informationSelective Laser Sintering of Duraform TM Polyamide with Small-Scale Features
Selective Laser Sintering of Duraform TM Polyamide with Small-Scale Features Vinay Sriram, Kristin Wood, David Bourell and Joseph J Beaman Department of Mechanical Engineering Laboratory of Freeform Fabrication
More informationModule 3 : Sewer Material. Lecture 3 : Sewer Material
1 P age Module 3 : Sewer Material Lecture 3 : Sewer Material 2 P age 3.1 Important Factors Considered for Selecting Material for Sewer Following factors should be considered before selecting material for
More informationENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING. January 24, 2014 06610-1
ENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING January 24, 2014 06610-1 SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS MOLDED GRATING PART 1 - GENERAL 1.1 SCOPE OF WORK A. The CONTRACTOR
More informationCHAPTER I. INTRODUCTION
CHAPTER I. INTRODUCTION 1.1 Background There is a national need to develop asphalt wearing surfaces for modern timber bridges that are not only skid resistant, but also limit the transport of moisture
More informationGood Boards = Results
Section 2: Printed Circuit Board Fabrication & Solderability Good Boards = Results Board fabrication is one aspect of the electronics production industry that SMT assembly engineers often know little about.
More informationElectronic Materials able to detect, amplify and transmit electrical signals in a complex manner are light weight, compact and energy efficient
CHAPTER 1 Knowledge and Comprehension Problems: 1.1 What are the main classes of engineering materials? Answer1.1: Metallic, polymeric, ceramic, composite, and electronic materials are the five main classes.
More informationTable of Contents PART 1 WINDOW SELECTION GUIDE. Window and Door Selection Guide
VOLUME 1 - WINDOWS AND DOORS Window and Door Selection Guide PART 1 WINDOW SELECTION GUIDE WSG-11 PART 2 - PERFORMANCE SPECIFICATIONS Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows
More informationConstruction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
More informationInnovative Polymer Solutions for Wire & Cable
Innovative Polymer Solutions for Wire & Cable A Bit More Amazing Engineered Polymers Industrial Engineered Polymers is more than a leading engineered polymer solutions supplier and manufacturer; it s a
More informationNON-WOVEN COMPOSITE OFFICE PANEL
NON-WOVEN COMPOSITE OFFICE PANEL Patent Number: US7871947 Publication date: 2011-01-18 Applicant(s): Milliken Provided herein is a non-stratified, or homogeneous, non-woven composite having (a) strength-imparting
More informationBuilding Envelope Design by Roxul (BEDR ) FireWall and Roxul Plus MB. Fire Rated Board Insulation for Pre-Engineered Metal Buildings
BUILDING ENVELOPE DESIGN BY ROXUL Building Envelope Design by Roxul (BEDR ) FireWall and Roxul Plus MB Fire Rated Board Insulation for Pre-Engineered Metal Buildings ROXUL FIREWALL & ROXUL PLUS MB Exterior
More informationTwo-Shot Silico e Thermoplastic Medical Molding
Two-Shot Silico e Thermoplastic Medical Molding Author: Sarah J. Voss, Product Specialist, Medical Co-Authors: Mark Simon, Ph. D. Research & Development Manager Danny Ou, Ph D. Research & Development,
More informationTiangang TM BW-10LD (622)
Tiangang TM BW-10LD Oligomeric Hindered Amine Light Stabilizer (HALS) Poly-(N-β-hydroxyethyl-2,2,6,6-tetramethyl-4-hydroxy-piperidyl-succinate) CAS number 65447-77-0 BW-10LD BW-10LD is a highly effective
More informationProfiles for floors of same height Cerfix Projoint
PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 (0)49 8878411 +39 (0)49 8878412 FAX. +39 (0)49-706692 EMAIL: INFO@PROFILPAS.COM s for floors of same height Cerfix Projoint Application
More informationPeel & Seal Self-Stick Roofing Solutions
Peel & Seal Self-Stick Roofing Solutions Ideal for Low Slope Applications Waterproof and Weatherproof Energy Efficient Tough and Durable Versatile, Effective Sealing Around Protrusions Perfect for Vents,
More information15. Silicones in the Plastics Industry G. Shearer, Multibase, a Dow Corning Company, Copley OH (USA)
15. Silicones in the Plastics Industry G. Shearer, Multibase, a Dow Corning Company, Copley OH (USA) Silicones are used in the plastics industry as additives for improving the processing and surface properties
More informationTechnical Services & Capabilities
Technical Services & Capabilities Machining Welding MIG TIG Robotic TIG Friction Stir Welding Solution Heat Treat & Artificial Aging Assemblies & Fabrication Bike Frame Specialists Technical Services Product
More informationENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES. July 1, 2008 Revision 2
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES 1 PART 1 - GENERAL 1.0 GENERAL 1.1 REFERENCES: SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED FIBERGLASS
More informationTech Transfer to Start-up and Manufacturing - Fabrication. Chris Moody
Tech Transfer to Start-up and Manufacturing - Fabrication Chris Moody Fabrication Incubators Business incubators can be just office space with business services and advice or they can provide early manufacturing
More informationBuilding Envelope Design using ROXUL. FIREWALL and ROXUL PLUS MB. Fire Rated Board Insulation for Pre-Engineered Metal Buildings
Building Envelope Design using ROXUL Building Envelope Design using ROXUL (BEDR ) FIREWALL and ROXUL PLUS MB Fire Rated Board Insulation for Pre-Engineered Metal Buildings ROXUL FIREWALL & ROXUL PLUS MB
More informationDECISION SUPPORT SYSTEM IN RAPID PROTOTYPING TECHNOLOGY Arkadiusz Rzucidło, Grzegorz Budzik, Łukasz Przeszłowski
Transactions on Business and Engineering Intelligent Applications 111 DECISION SUPPORT SYSTEM IN RAPID PROTOTYPING TECHNOLOGY Arkadiusz Rzucidło, Grzegorz Budzik, Łukasz Przeszłowski Abstract: Article
More informationDenco Sales Aspire Catalog
Denco Sales Aspire Catalog This catalog is a product reference guide. For more detailed information, inventory availability, pricing, data sheets, printing profiles and more click here to go to the Denco
More informationYour ideas. Our technologies.
Your ideas. Our technologies. For more than a decade, 3M has been a trusted supplier of advanced materials for the solar industry. Our broad range of products and technologies is designed to enhance performance,
More informationInvestigating Methods of Prototyping with ABS
Investigating Methods of Prototyping with ABS Ben Chapman, Shivam Desai, Mark Muraoka, Teodora Vidolova 1 Abstract In this comparative study of the mechanical properties of plastic parts produced by three
More informationTUTOR NOTES. How to use this pack. Rapid prototyping in schools. Definition
TUTOR NOTES How to use this pack This pack is aimed at students studying for both Intermediate 2 and Higher Product Design. Students of other subjects might find it useful, and a Curriculum Map has been
More informationthe runnerless types of molds are explained post molding operations are described the basic methods of applied decoration methods are examined
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of the various plastic finishing processes used in industry and their
More informationFDM Material Properties
Details FDM Standard lead time: Layer thickness: Standard accuracy: Surface finish: Maximum part dimensions: Capacity: Materials: 4-5 days 0.25 mm (for ABS, ABSi) 0.18 0.25 mm (for ABS-M30, ABS-M30i, PC,
More informationThe Prototyping Challenges with Micro Molding: A Comparative Study of Prototyping Methods for Micro Molding Applications
I. The Premise A lot has changed in the last 20+ years. Just two short decades ago our top speed personal computer processors were clocked at 386 MHz, hard drive space and RAM memory were still measured
More informationScience and Technology of Polymers Prof. Basudam Adhikari Department of Materials Science Centre Indian Institute of Technology, Kharagpur
Science and Technology of Polymers Prof. Basudam Adhikari Department of Materials Science Centre Indian Institute of Technology, Kharagpur Lecture - 18 Polymer Products (Refer Slide Time: 00:28) So, good
More informationENTRANCE MATS & GRIDS
152 Rollins Avenue #102 Rockville, MD 20852 800-762-9010 240-780-3309 (f) http://www.americanfloormats.com ENTRANCE MATS & GRIDS PART I - GENERAL 1.01 Summary A. This section includes the following types
More informationJacket crown. Advantage : Crown and Bridge
Crown and Bridge Lecture 1 Dr.Nibras AL-Kuraine Jacket crown It is a type of crown that is formed by a tooth colored material. It is mainly used as a single unit in the anterior quadrant of the mouth.
More information3D PRINTING OF CONTINUOUS FIBER REINFORCED PLASTIC
3D PRINTING OF CONTINUOUS FIBER REINFORCED PLASTIC Masaki NAMIKI 1, Masahito UEDA 1, Akira TODOROKI 2 Yoshiyasu HIRANO 3, Ryosuke MATSUZAKI 4 1 Nihon University, 1-8-14 Kanda-surugadai, Chiyoda, Tokyo,
More informationA STUDY ON BONDING STRENGTH OF POLYMERIC FIBERS TO CEMENTITIOUS MATRIX
CD01-006 A STUDY ON BONDING STRENGTH OF POLYMERIC FIBERS TO CEMENTITIOUS MATRIX H.R. Pakravan 1, M. Jamshidi 2, M. Latifi 3 1 M.Sc. student, Textile Engineering Department, Amirkabir University, Tehran,
More informationGLOBAL MANUFACTURING. ARAUJO, Anna Carla AUG, 2015 Mechanical Engineering Department POLI/COPPE/UFRJ
GLOBAL MANUFACTURING ARAUJO, Anna Carla AUG, 2015 Mechanical Engineering Department POLI/COPPE/UFRJ Changing Schedule: 5-24/8 - Fabrication of Plastic, Ceramics and Composites 6-26/8 Fabrication of Ceramics
More informationChapter 6: Fibers. Fibers. Fibers. Fibers. Fabric. Types of Fibers. Chapter 6. Kendall/Hunt 1
Chapter 6: Wherever he steps, whatever he touches, whatever he leaves even unconsciously, will serve as silent witness against him. Not only his fingerprints or his footprints, but his hair, the fibers
More informationFLEXIBLE CIRCUITS MANUFACTURING
IPC-DVD-37 FLEXIBLE CIRCUITS MANUFACTURING Below is a copy of the narration for DVD-37. The contents of this script were developed by a review group of industry experts and were based on the best available
More informationRetail Price List 2015
Retail Price List 2015 SETTING MORTARS SERVOFLEX TRIO SUPER TEC Flexible Full Transfer Thin Set and Medium Bed Mortar 20 KG Flexible, cement-based thin set and medium bed mortar with polymer additive for
More information30. Hofer Vliesstofftage 2015
30. Hofer Vliesstofftage 2015 Advanced polymer film inspection systems for process analysis and yield optimization full integration into the production Presented by: Dr. Michael Kohlert Mondi Gronau GmbH
More informationCeralink Capabilities and Opportunities
Ceralink Capabilities and Opportunities Dr. Holly Shulman President, Materials Scientist Ceralink Inc. Rensselaer Technology Park 105 Jordan Rd. Troy, New York 12180 holly@ceralink.com www.ceralink.com
More informationHow To Make A Hot Melt Adhesive
Types of Bonding Physically hardening adhesives 2 2 Drying Adhesives They are made of polymers dissolved in solvent (Polychloroprene, Polyurethane) or dispersed in water (white glue based on PVA (Polyvinyl
More informationTriarch Products Over Various Interior Substrates
Triarch products work well over a variety of substrates, both for interior and exterior settings. This document will only discuss interior substrates and is not intended to be a technical discussion of
More informationROHACELL Triple F. Complex shaped PMI Foam Cores for highly efficient FRP Composite
Complex shaped PMI Foam Cores for highly efficient FRP Composite ROHACELL Triple F Sandwich Fabrication for low to - A Novel Particle Foam high volume applications SAMPE tesdr. Kay Brazil Conference 2015
More informationProduction of Wind Tunnel Testing Models with use of Rapid Prototyping Methods
Production of Wind Tunnel Testing Models with use of Rapid Prototyping Methods R. ADELNIA 1, S. DANESHMAND 2, S. AGHANAJAFI 3 Mechanical Group, Majlesi Azad University Isfahan IRAN Abstract: In a time
More informationComposite Materials. Mary P. Shafer. Fabric Development, Inc. Quakertown, PA 18951
Composite Materials Mary P. Shafer Fabric Development, Inc. Quakertown, PA 18951 Composite Material Two inherently different materials that when combined together produce a material with properties that
More informationThis presentation is courtesy of
This presentation is courtesy of Advances in Flexible Packaging Adhesives CPP Expo Presentation September, 2005 Nancy Smith Agenda Basic types/ functions of adhesives used in flexible packaging Laminating
More information