Public Training Schedule 2015
|
|
|
- Lindsay Griffin
- 8 years ago
- Views:
Transcription
1 ISO 9001:2008 Quality Management Systems 1 2, (English ver.) 1 3, , Internal Auditor 2 4, Internal Auditor (English ver.) 2 5, Internal Auditor (ISO 9001 basic knowledge for a beginner) 2 5, Effective QMR 2 4, Genius DCC 1 2, CAR Writing (Practical workshop) 1 3, Internal Audit Techniques (Practical workshop) 1 3, ISO/DIS 9001:2014 Quality Management Systems 1 900/1, ISO 9001:2015 Quality Management Systems 1 2, , Internal Auditor 2 4, Internal Auditor 2 5, Effective QMR 2 4, Genius DCC 1 2, ISO 14001:2004 Environmental Management Systems 1 2, , Internal Auditor 2 4, Internal Auditor 1 4, Effective EMR 2 4, Genius DCC 1 2, Environmental Aspect Identification and Evaluation (Theory & workshop) 1 3, Environmental Laws 1 3,
2 ISO/DIS 14001:2014 Environmental Management Systems 1 900/1, ISO 14001:2015 Environmental Management Systems 1 2, , Internal Auditor 2 4, Internal Auditor 1 4, Effective EMR 2 4, Genius DCC 1 2, Environmental Laws 1 3, ISO/DIS 9001:2014 Quality Management Systems and ISO/DIS 14001:2014 Environmental Management Systems 0.5 2, OHSAS 18001:2007 Occupational Health & Safety Management Systems Introduction and Implementation 1 2, , Internal Auditor 2 4, Internal Auditor (required any kind of ISO Management System/Internal Auditor qualified) Hazard Identification and Risk Assessment (Theory & workshop) 1 4, , Integrated Management Systems of ISO 9001 and ISO of ISO 9001 and ISO (Japanese ver.) of ISO and OHSAS of ISO 9001, ISO and OHSAS of ISO 9001, ISO and OHSAS Internal Auditor of ISO 9001 and ISO Internal Auditor of ISO and OHSAS , , , , , , ,
3 Integrated Management Systems Internal Auditor of ISO 9001, ISO and OHSAS , Effective QMR and EMR 2 4, Effective EMR and SMR 2 4, Effective QMR, EMR and SMR 3 6, ISO/TS 16949:2009 Automotive Management Systems 2 4, Internal Auditor 2 4, Advanced Product Quality Planning (APQP) 2nd Edition and Control Plan and Product Part Approval Process (PPAP) 4th Edition Failure Mode and Effects Analysis (FMEA) 4th Edition Statistical Process Control (SPC) 2nd Edition Measurement System Analysis (MSA) 4th Edition 2 4, , , , VDA-Verband der Automobilindustrie Overview Process Technique for VDA 6.3 VDA 6.3-Module A+Module BI-General Basics for Process Auditors VDA 6.3 for serial production 1 6, , VDA 6.3-Module E-Qualification as Process Auditor in the Product Life Cycle with Certificated Examination 5 65, ISO 31000:2009 Risk Management Principles and Guidelines 2 6, Application of Risk Management Systems 1 4, ISO 22301:2012 Business Continuity Management Systems 0.5 2, Internal Auditor 1 4, ISO 50001:2011 Energy Management Systems Introduction and Requirements 1 2,
4 ISO 50001:2011 Energy Management Systems 0.5 2, Internal Auditor 2 4, Internal Auditor (required any kind of ISO Management System/Internal Auditor qualified) ISO/IEC 17025:2005 Laboratory and Measurement Systems 1 4, , Internal Auditor 2 4, Genius DCC 2 4, Acceptance Sampling Technique 1 3, Measurement and Calibration Introduction to Equipment Calibration 1 2, Calibration Method and Technique 1 2, Metrology and Measuring Devices 2 4, Calibration Certificate Reading 2 4, ISO 13485:2003 Medical Devices-Quality Management Systems Requirements and Implementation 2 6, Internal Auditor 3 7, Process Validation 2 6, ISO 14971:2007 Medical Devices-Application of Risk Management to Medical Devices Risk Management 1 5, ISO 26000:2010 Social Responsibility Introduction and Awareness 2 4, SA 8000 Social Accountability 1 2, Internal Auditor 2 4, Genius DCC 1 2, BSCI-Business Social Compliance Initiative Requirements 1 3, EICC-The Electronic Industry Citizenship Coalition Code of Conduct Requirements 1 3,
5 TLS 8001 Thai Labor Standard 1 2, Internal Auditor 1 2, GMP (Good Manufacturing Practice) & HACCP (Hazard Analysis and Critical Control Point) Introduction and Implementation 2 4, Internal Auditor 2 4, Genius DCC 2 4, ISO 22000:2010 Food Safety Management Systems 1 3, Requirements, Interpretation and Internal Auditor 1 4, Internal Auditor 2 4, FSSC 22000:2010 Food Safety Management Systems 1 3, Requirements, Interpretation and Internal Auditor (required ISO 22000/Internal Auditor qualified) 1 4, Internal Auditor 2 4, BRC-The British Retail Consortium Issue 6 2 5, AS 9100 (Rev. C) Aerospace Standard Overview and Implementation 2 7, Overview and Implementation (English ver.) 2 8, Internal Auditor 2 7, Internal Auditor (English ver.) 2 8, IRIS International Railway Industrial Standard 1 4, Productivity 5S Awareness 1 2, Why-Why Analysis 1 2, Quality and Problem Solving Quality Control Circle (QCC) 2 4,
6 Quality and Problem Solving QC 7 Tools 2 4, Cost of Quality 2 4, Cost of Poor Quality 1 3, Root Cause Analysis and Corrective/Preventive Technique Corrective and Preventive Action by 8D Technique 1 2, , Introduction to Six Sigma 1 2, Management Key Performance Indicator (KPI) 1 3, Kaizen Tools 1 2, Wastes Reduction 1 2, Balanced Scorecard 1 3, Supervisor Development and Teamwork The Role and Responsibility of Supervisor 2 4, , Leadership Development 1 3, Train the Trainer 2 6, On the Job Training (OJT) 2 4, Job Coaching and Ordering Technique 2 4, Problem Solving and Decision Making 2 4, Manufacturing Management Just-In-Time (JIT) 2 4, Lean Manufacturing 2 4, Toyota Production System (TPS) 2 4, Remark: *Training fee is excluded VAT 7%. Training on your site Please call for quoting or as contact below 18/F, Tararom Business Tower, 2445/36-38 New Petchburi Road, Bangkapi, Huay Kwang, Bangkok More Information and Reservation: Professional Training Tel Ext. 161 K. Ruethai Fax , ruethai.thammatien@tuv.com Hat Yai Office: K. Wilailak Tel wilailak.intana@tuv.com
2015 SGS MALAYSIA PUBLIC TRAINING SCHEDULE
SGS Always 2015 SGS MALAYSIA PUBLIC TRAINING SCHEDULE Provide experts who are real practitioners in their professional fields as tutors and facilitators. We constantly review, monitor and evaluate our
Training Schedule for 2016/2017 CERTIFIED COURSES
S I N G A P O R E Q U A L I T Y I N S T I T U T E Website: www.sqi.org.sg Email: enquiries@sqi.org.sg Our World Partner in Quality Training Schedule for 2016/2017 CERTIFIED COURSES Course Day / Hour Commencement
Sam TQM Consultants. Organization Profile. NO-162/1, S2, Ganesh Flats, Ponniamman Koil Street, Karpagambal Nagar, Madhananthapuram, Porur,
Sam TQM Consultants Organization Profile NO-162/1, S2, Ganesh Flats, Ponniamman Koil Street, Karpagambal Nagar, Madhananthapuram, Porur, Chennai- 125, Tamil Nadu, India. Phone: 044-65555590,65681477 Mobile:
COURSES & WORKSHOPS. Foreign Investment, Innovation Management, Food Safety, Certifiable Management Systems, R&D Business
COURSES & WORKSHOPS Foreign Investment, Innovation Management, Food Safety, Certifiable Management Systems, R&D Business INTRODUCTION "We design and implement courses and workshops tailor made to your
Bureau of Standards Jamaica Quarterly Training Schedule July - September 2015
Bureau of Standards Jamaica Quarterly Training Schedule July - September 2015 () The mission of the BSJ Training unit is to promote a culture of quality within the Jamaican society, by providing high and
ISO 17025. Laboratory Quality Management. ISO 17025 Course Descriptions. training@qsiamerica.com www.qsiamerica.com
ISO 17025 Laboratory Quality Management ISO 17025 Course Descriptions - Fundamentals Course Pg.2 - Documentation & Implementation Course Pg.3 - Auditor Course Pg.4 - Lead Auditor Course Pg.5 - Other Standards
The Adoption of Management Systems Standards & Best Practices in Malaysia (Current and Future Trend)
Nang Yan Business Journal 1.1 2012 Paper #: 2-05 P- 105 The Adoption of Management Systems Standards & Best Practices in Malaysia (Current and Future Trend) Dr. Mohd Azman Idris SGM, SIRIM Training Services,
Enrolment in the training course and exam for auditors of accredited bodies certified to ISO/TS 16949
Enrolment in the training course and exam for auditors of accredited bodies certified to ISO/TS 16949 Preliminary remarks Only the official contact persons of the accredited certification bodies are authorized
Knowledge. Further excellence. Learning & Development Solutions. sgs academy
Knowledge transformation Skills retention Further excellence behaviour enhanced performance expertise Ability HOW CAN YOU AND YOUR BUSINESS GET THE RIGHT TRAINING TO CONTINUOUSLY DEVELOP? SGS Academy Malaysia
Management. Systems, Inc. ISO 9001. Fall 2015 / Winter 2016. Your Management Systems Solutions Provider ISO 14001 ISO 50001 ISO 13485 ISO 17025
Fall 2015 / Winter 2016 Management Systems, Inc. ISO 9001 ISO 14001 ISO 50001 ISO 13485 ISO 17025 ISO/TS 29001 ISO 31000 TS 16949 OHSAS 18001 AS9100 AS9110 FSSC 22000 ISO 22301 Your Management Systems
MANAGEMENT SYSTEM PUBLIC TRAINING SCHEDULE
MANAGEMENT SYSTEM PUBLIC TRAINING SCHEDULE JANUARY JUNE 2015 NO COURSE TITLE CODE DAYS QUALITY 1 2 3 HOT! ISO 9001:2008 or/lead or Course (IRCA Cert. Course.No.: A 17038) HOT! QMS Interpretation and Documentation
TÜV SÜD Akademie Trainings and certificates on international standards
TÜV SÜD Akademie Trainings and certificates on international standards Management Systems Name Duration All participants gain a TÜV SÜD Akademie certificate. Special types of certificates: Modular qualification
FSSC 22000-Q. Certification module for food quality in compliance with ISO 9001:2008. Quality module REQUIREMENTS
FSSC 22000-Q Certification module for food quality in compliance with ISO 9001:2008 Quality module REQUIREMENTS Foundation for Food Safety Certification Gorinchem, The Netherlands: 2015 Version Control
2014 Course Offerings
628 Greene Road Woodridge, IL 60517 Ò Since 1986 The great thing in this world is not so much where we stand, as in what direction we are moving. Oliver Wendell Holmes Consulting Training Assessments ISO
QMS: Quality Management Systems
Heribert Nuhn Dahlienweg 2 D-56587-Strassenhaus Tel.: (49) 02634-9560 71 FAX.: (49) 02634-9560 72 Mobil.: (49) 0171 315 77 68 U@AOL.com : Quality Management Systems Seminars: Awareness Seminars ISO/ TS
Training Prospectus. Sri Lanka Standards Institution 1
Sri Lanka Standards Institution 1 PROSPECTUS FOR TRAINING PROGRAMMES JAN DEC Training Division Sri Lanka Standards Institution No.17, Victoria Place, Elvitigala Mawatha, Colombo 08. Telephone Fax E-mail
DESIGNED FOR QUALITY ASSURANCE
DESIGNED FOR QUALITY ASSURANCE DESIGNED FOR QUALITY ASSURANCE Executive Summary Quality can be defined as fitness for use as defined by the customer. A quality product or service contributes to customer
The Fulfillment of AS 9100 Rev C Requirements by EnterpriseIQ
The Fulfillment of AS 9100 Rev C Requirements by EnterpriseIQ Manufacturers have worked to meet the stringent requirements of AS9100 for decades; the recent introduction of Revision C has further expanded
Understanding AIAG Sub-tier Supplier Management (CQI-19) DRIVING WORLDWIDE BUSINESS EXCELLENCE
Understanding AIAG Sub-tier Supplier Management (CQI-19) DRIVING WORLDWIDE BUSINESS EXCELLENCE 2014Omnex, Inc. 325 East Eisenhower Parkway, Suite 4 Ann Arbor, MI 48108 734-761-4940 This publication is
Lean Manufacturing Practitioner Training
Lean Manufacturing Practitioner Training Eliminate waste and maximize customer value kpmg.com/eastafrica/mc Lean Manufacturing Practitioner Training Lean Manufacturing is a way to eliminate waste, reduce
TÜV AUSTRIA CERT GMBH. Your partner for certifications and operational safety
TÜV AUSTRIA CERT GMBH Your partner for certifications and operational safety Independent quality certification and legal security from a single source Certificates as objective proof of quality, legal
Quality Manual 102 1. 19 MAR 03 Rev P EC 0990 1677 02
2003 Tyco Electronics Corporation Harrisburg, PA All International Rights Reserved Indicates change Quality Manual 102 1 19 MAR 03 Rev P EC 0990 1677 02 CONTENTS 1. SCOPE.......................................................................
FMEA and HACCP: A comparison. Steve Murphy Marc Schaeffers
FMEA and HACCP: A comparison Steve Murphy Marc Schaeffers FMEA and HACCP: A comparison Introduction FMEA and Control planning is being used more and more in industry. In the food industry companies use
THE MODERN THEORY OF THE TOYOTA PRODUCTION SYSTEM
THE MODERN THEORY OF THE TOYOTA PRODUCTION SYSTEM A SYSTE Phillip Marksberry, PhD, PE /O\ CRC Press yc**" J Taylor & Francis Group V^_,/ Boca Raton London NewYork CRC Press is an imprint of the Taylor
UNDERSTANDING THE FSSC 22000 FOOD SAFETY SYSTEM CERTIFICATION STANDARD
UNDERSTANDING THE FSSC 22000 FOOD SAFETY SYSTEM CERTIFICATION STANDARD A WHITE PAPER ON THE CHALLENGES, IMPACTS AND OPPORTUNITIES CONTAINED IN FSSC 22000 FEBRUARY 2010 AUTHORS Supreeya Sansawat Global
TÜV RHEINLAND. TRAINING & CONSULTING. Developing People. Strengthening Businesses. Training, Consulting, HR Services, Information
TÜV RHEINLAND. TRAINING & CONSULTING Developing People. Strengthening Businesses. Training, Consulting, HR Services, Information In search for excellence. Professional training by TÜV Rheinland. Quality
EVERYTHING IS POSSIBLE Services for all fields of quality management
EVERYTHING IS POSSIBLE Services for all fields of quality management Quality Service www.zeppelin-qm.com WE CREATE SOLUTIONS Zeppelin Quality Service With its long tradition, Zeppelin has gained a good
ISO 9001:2015 Draft International Standard Overview. Carmine Liuzzi Industry Leader SAI Global Assurance Services, Training & Improvement Solutions
ISO 9001:2015 Draft International Standard Overview Carmine Liuzzi Industry Leader SAI Global Assurance Services, Training & Improvement Solutions Presenters Carmine Liuzzi Industry Leader Training & Improvement
Copyright Quexx International Ltd. 1992-2010. (Press Space Bar) Quexx
1-page Report Copyright International Ltd. 1992-2010 (Press Space Bar) Concise Reports and A3 Concise reports are the cornerstone of effective corporate communication. A3 is a basic standard tool of any
GCERT BALTIC JSC. Tel.: +370 682 16 335 info@gcert.lt, www.gcerti.com www.gcert.eu Vilnius, Lithuania GCERT BALTIC JSC. ISO certification and training
Tel.: +370 682 16 335 info@gcert.lt, www.gcerti.com www.gcert.eu Vilnius, Lithuania GCERT BALTIC JSC GCERT BALTIC JSC - certification and training service provider. We provide Auditors and Management Systems
BRC Food Safety Management System Implementation Workbook
We have written this workbook to assist in the implementation of your BRC food safety management system. The workbook is divided into 8 steps that are designed to assist you in implementing your food safety
ISO 22000 Food Safety Management System
This is an ideal package for Food Manufacturers looking to meet International Food Safety Standards. This system meets the requirements of International Standard ISO 22000:2005 for Food Safety Management
Management System Procedure. 4.06 30 004 N 4/01/2012 2 of 14
4.06 30 004 N 4/01/2012 2 of 14 TABLE OF CONTENTS 1. Introduction 1.1 Policy and Vision 1.2 Purpose 1.3 Scope 1.4 Responsibility 2. Quality System Requirements 2.1 ISO/TS 16949: 2009 and Alternatives 2.2
GLB QM 02. Supplier Quality Manual 03. 7/11/12 Supplier Quality 1 of 18. Revision Level. Issue Date Issuing Department Page
7/11/12 Supplier Quality 1 of 18 7/11/12 Supplier Quality 2 of 18 Table of Contents 1.0 Introduction 3 2.0 Manual 4 2.1 Application 4 2.2 Quality Management System of the Supplier 4 2.3 Quality Management
TRAINING TITLE: Internal Auditing Workshop (WORK-008)
TRAINING TITLE: Internal Auditing Workshop (WORK-008) OVERVIEW: GMP regulations worldwide as well as FDA and ICH guidances require that companies have in place an internal quality audit program. Auditing
Integrating Social Responsibility with Quality and Environmental Management Systems
Integrating Social Responsibility with Quality and Environmental Management Systems Chad Kymal Omnex, Inc. Pathways to Social Responsibility Conference Session Number: Speaker Bio Chad Kymal is the CTO
Training & Services Brochure
Training & Services Brochure Improving the quality of life of all South Africans South African Quality Ins tute Tel: (012) 349 5006 Fax: (012) 349 1232 vanessa@saqi.co.za www.saqi.co.za SAQI Mission &
Supplier quality guideline. VOSS Automotive Group Issue 02.06.2014 Rev00
Supplier quality guideline VOSS Automotive Group Issue 02.06.2014 Rev00 Table of Contents 1. General requirements 1.1 Scope of application 1.2 Quality objectives 1.3 Quality management system 1.4 Supplier
Business improvement workshops
Business improvement workshops Performance Workshops Meet the challenge to improve performance After attending a SR Operational Boot Camp put on by the Strategic Business Services Division we immediately
Quality Risk Management Training
IHS OPERATIONAL EXCELLENCE & RISK MANAGEMENT Quality Risk Management Training Identify, analyze, mitigate and monitor quality risks and hazards across your organization. These training programs leverage
quality, health & safety and environment training and consulting
quality, health & safety and environment training and consulting QUALMS Group QHSE Training & Consulting is a leading business services provider of applied; Quality, Food Safety, Occupational Health &
Introduction. Cooper Standard Global Supplier Quality Manual Page 2 of 11
Global Supplier Quality Manual Revision 3 Introduction 1. Purpose: This manual has been created for Cooper Standard s (CS) Production, Prototype and Service Suppliers. The manual includes all CS locations
Master Degree Programs
Master Degree Programs Special degree programs jointly offered by PIQC and Group of Colleges with world-class curricula and teaching Leading the Modern Quality Movement in Pakistan Quality Masters in Quality
What Are the Differences?
Comparison between the MSA manual and VDA Volume 5 What Are the Differences? MSA is short for Measurement Systems Analysis. This document was first published by the Automotive Industry Action Group (AIAG)
MassMEP Course Descriptions for Workforce Training Fund Manufacturing Consortium Grants MANUFACTURING CONSORTIUM TRAINING COURSES
MANUFACTURING CONSORTIUM TRAINING COURSES Shown below are the course descriptions tentatively scheduled for the 2013/2014 Southern Worcester County Manufacturing Consortium. Basic Manufacturing Skills
January 2016 December 2016
January 2016 December 2016 2016 is just around the corner! So where will the year take you? With just a month to the year end, you should be well on your way to meet the forecasts set for 2016. Have your
Lean Specialist Certification Program
Lean Specialist Certification Program ADVANCED INNOVATION GROUP PRO EXCELLENCE Lean Specialist Certification Program Certification from AIGPE has upheld the highest standards in the field of quality excellence
VDA6.3 Process Audit Webinar 1 st April 2014. Paul Hardiman Qualified VDA6.3 trainer
VDA6.3 Process Audit Webinar 1 st April 2014 Paul Hardiman Qualified VDA6.3 trainer During presentations (11:00 11:30) everyone will be muted so that only the presenter will be heard. The presentation
Lean Management. KAIZEN Training of Trainers. KAIZEN Facilitators Guide Page to.
Lean Management KAIZEN Training of Trainers KAIZEN Facilitators Guide Page to. Objectives of the session At the end of the session, trainees are able to: 1) Understand the philosophy on lean management
Quality, Environmental, Health and Safety Manual Toshiba International Corporation
Quality, Environmental, Health and Safety Manual Toshiba International Corporation Doc. No. QEHS 001 Rev. 19 (12/12) Title: Prepared By: Revision No.: Table of Contents and Cross Reference Ken Mori/Homer
The Centre for Environmental Management (CEM) offers the following Environmental and Occupational Health & Safety Management Courses
Schedule 2016 Course dates 2016 Rev 2016-40 Page 1 of 10 Course Dates 2016 Internal Box 150, Private Bag X6001, Potchefstroom, South Africa 2520 Centre for Environmental Management Tel: +27 (0) 18 299-2714
The Company Comercializadora del Centro Bonanza, S.A. de C.V. (BONANZA)
The Company Comercializadora del Centro Bonanza, S.A. de C.V. (BONANZA) is located in Villa de Pozos, SLP Mexico. BONANZA was founded in 2003 and began operations in 2005. While BONANZA s start up of operations
AIAG BRIEFIING OCTOBER 16, 2015 LANG WARE DIRECTOR - SUPPLY CHAIN
AIAG BRIEFIING OCTOBER 16, 2015 LANG WARE DIRECTOR - SUPPLY CHAIN AIAG at-a-glance Globally recognized trade association founded in 1982 Where professionals volunteer to work on streamlining industry processes
Terms and Conditions of Certification TUV Rheinland of North America
Terms Conditions of Certification TUV Rheinl of North America I. General Terms Conditions of Certification 1. Scope 1.1 These Terms Conditions of Certification apply to the agreed certification services
GE Power Electronics Business Total Quality Management for Suppliers
GE Power Electronics Business Total Quality Author: Reviewers: Contributors: Alessandro A. Cervone Technical Manager Component & Reliability Engineering Alicia Scott Title Erika Nannis Title Robert Roessler
Education and Development for Transformation Lean/Six Sigma Curriculum
Education and Development for Transformation Lean/Six Sigma Curriculum Curriculum Syllabus Version 5.0 May 2015 Education and Development for Transformation: Lean/Six Sigma Curriculum GP Strategies Operational
PIETER HAASBROEK SENIOR MANAGER SABS RSA
PIETER HAASBROEK SENIOR MANAGER SABS RSA INTRODUCTION SABS OVERVIEW State owned company (established 1945) Mandated by the Standards Act 2008 (Act 8 of 2008) Employ 1200 people Head Office, Regional offices
Operations Management and Lean Six Sigma. Presented by: David Muncaster Manager, CI and CSAT Staples Advantage Canada
Operations Management and Lean Six Sigma Presented by: David Muncaster Manager, CI and CSAT Staples Advantage Canada Who is this guy standing up in front of you? Manager, Continuous Improvement and CSAT
Management System Certification/Registration Rules 9th Edition, Revised on March 20, 2015 Effective from April 1, 2015
Management System Certification/Registration Rules 9th Edition, Revised on March 20, 2015 Effective from April 1, 2015 Management Systems Sector, Japan Quality Assurance Organization Introduction This
Supplier Quality Requirements Document (SQRD)
Supplier Quality Requirements Document (SQRD) Products and specifications are subject to change without notice. Page 1 of 19 Table of Contents 1.0 Purpose... 4 2.0 Scope... 4 3.0 Responsibility... 4 4.0
Comparison ISO/TS 16949 (1999) to VDA 6.1 (1998)
1 APPLICABILITY VDA 6.1: Section: 3.1; 7 new: In addition to the applicability for supplier sites for production, services and their subcontractors for: products and production materials, or services like
SCHEDULE COURSES. Your future, Our Goal. Dubai Branch +971 4818 7227, 7228 +971 4818 7280 +971 5665 40257. info@almashreqbh.com www.almashreqbh.
COURSES SCHEDULE 2015 Dubai Branch Your future, Our Goal AlMashreqBH T F M E W +971 4818 7227, 7228 +971 4818 7280 +971 5665 40257 info@almashreqbh.com www.almashreqbh.com The leading Training Provider
Achieve ISO Certification
Achieve ISO Certification Risk Management & Compliance Services Main UK Office 020 3432 2854 Midlands Office 01332 896 478 Wales & West Office 029 2000 4623 Assent 1st Floor, 120 London Road, Benfleet,
Business Improvement. Intro. The shining of the compass metal needle. The one leading all the individual units of the fleet toward the same goal.
Business Improvement The shining of the compass metal needle. The one leading all the individual units of the fleet toward the same goal. Intro Symbol is a leading service provider and trainer in process
2015 Training Program
2015 Training Program Implementing BRC Course BRC Conversion Course - Issue 6 to 7 HACCP Training Course SQF Training Course Microbiology & Food Safety Course 2015 Implementing the BRC Global Standard
Training for Business and Industry
O a k l a n d C o m m u n i t y C o l l e g e Training for Business and Industry Learn from the Leaders. O a k l a n d C o m m u n i t y C o l l e g e Training for Business and Industry Learn from the
Case Study NEW WEI SAN INDUSTRIAL CO., LTD. (NWS)
Case Study NEW WEI SAN INDUSTRIAL CO., LTD. (NWS) Integrated System for Quality, Production and Traceability Management Integrated System for Quality, Production and Traceability Management IBS:MES in
How To Train For Business
TRAINING BROCHURE 2015 Sales Training International Limited www.salestrainingint.com / Tel: 0845 8901 701 Contents About Sales Training International... 2 Training Courses... 3 Leadership and Management...
BRC Food Safety and Quality Management System. New Issue 7
New Issue 7 This is an ideal package for Food Manufacturers looking to meet BRC Global Standard for Food Safety (Issue 7 2015) for Food Safety Quality Management Systems. Our BRC Food Safety Quality Management
GRADUATE CERTIFICATE IN GOOD MANUFACTURING PRACTICE (GMP) Plan your career for tomorrow and you will be ahead of your competitors
GRADUATE CERTIFICATE IN GOOD MANUFACTURING PRACTICE (GMP) Plan your career for tomorrow and you will be ahead of your competitors This course is a distance-learning program that will culminate in a Graduate
The Body of Quality Knowledge
Introduction According to Dr. Juran every profession needs a body of knowledge as one of the foundations that defines the profession and provides the basis for regulation of the profession. The Body of
Website : www.sgsina.ir Mobile: 0918 811 2283
Website : wwwsgsinair Mobile: 0918 811 2283 Email: info@sgsinair es_babaee@yahoocom 13920820 System Gostar Sina co(esbabaei) : Improvement 5S Measurement 5S 5S 5S 5S Identify waste 13920820 System Gostar
MS/ MPhil Degree Programs
Degree Programs Special degree programs jointly offered by PIQC and Group of Colleges with world-class curricula and teaching Leading the Modern Quality Movement in Pakistan Quality Quality is an emerging
MSS40111 Certificate IV in Sustainable Operations
MSS40111 Certificate IV in Sustainable Operations Release: 2 MSS40111 Certificate IV in Sustainable Operations Modification History Release 2: Imported competitive manufacturing units replaced with competitive
The Evolution of ISO 9000 Software
Information and communication technologies and Quality software: from recording nonconformities to managing for performance management system Implementation The number of ISO 9000 software support packages
ARTICLE IN PRESS. LeanThinking. journalhomepage:www.thinkinglean.com/ijlt. Driving Value in The Upstream Chain Management Through Lean Principles
InternationalJournalofLeanThinkingVolume2,Isue2(December2011) LeanThinking journalhomepage:www.thinkinglean.com/ijlt Driving Value in The Upstream Chain Management Through Lean Principles Marc Helmold
Ford Motor Company Customer-Specific Requirements
Ford Motor Company Customer-Specific Requirements For Use With ISO/TS 16949 Per ISO/TS 16949, an "organization" is the manufacturing facility being registered to ISO/TS 16949. The sub-tier supplier is
MANAGEMENT SYSTEMS APPLICABLE TO THE SOUTH AFRICAN WINE INDUSTRY
MANAGEMENT SYSTEMS APPLICABLE TO THE SOUTH AFRICAN WINE INDUSTRY Compiled by: Adele Louw & Lourens van Schoor ENVIROSCIENTIFIC On behalf of: THE SOUTH AFRICAN WINE & SPIRIT BOARD April 2011 Reviewed by:
Introduction to Quality Systems
Introduction to Quality Systems An NTMA Technology Team Member Training Program Intro to Quality Quality systems are methodologies in which a manufacturer must establish and follow a system to help ensure
List of training programmes (FMM Institute JOHOR branch)
List of training programmes (FMM Institute JOHOR branch) Please tick ( ) or write down the number of the participants who would like to attend the required programme(s) at the appropriate boxes. 1. Management
How to Upgrade SPICE-Compliant Processes for Functional Safety
How to Upgrade SPICE-Compliant Processes for Functional Safety Dr. Erwin Petry KUGLER MAAG CIE GmbH Leibnizstraße 11 70806 Kornwestheim Germany Mobile: +49 173 67 87 337 Tel: +49 7154-1796-222 Fax: +49
TABLE OF CONTENTS CHAPTER NO. TITLE PAGE NO. LIST OF TABLES LIST OF FIGURES LIST OF SYMBOLS AND ABBREVIATIONS
vii TABLE OF CONTENTS CHAPTER NO. TITLE PAGE NO. ABSTRACT LIST OF TABLES LIST OF FIGURES LIST OF SYMBOLS AND ABBREVIATIONS iii xi xiv xvii 1 INTRODUCTION 1 1.1 INTRODUCTION 1 1.2 PROBLEM DEFINITION 4 1.3
LEAN TECHNIQUES. Some of Our Lean Courses: --How to Implement Lean in Small Companies --Flow control/management
One Sunny Hill, Oxford, MA 01540 Phone: 1-877-987-3801 Email: info@qpsinc.com LEAN TECHNIQUES ARE YOU LOOKING TO LEAD THE INDUSTRY? For Manufacturing or Service Does your company: - Have adequate profitability
Root Cause Analysis & Systemic Corrective Action
Root Cause Analysis & Systemic Corrective Action Presented by Shannon Craddock of Perry Johnson Registrars, Inc. July 2012 Today s s Agenda Why are we doing this? Audit Finding Actions Taken to Correct
Section 4. Salary by ASQ and RABQSA Certification
PART 1. REGULAR EMPLOYEE RESULTS Section 4. Salary by ASQ and RABQSA Certification FIGURE 1 Percentage of Respondents Holding ASQ Certifications ASQ certification quality engineer 23.9 quality auditor
4/23/2015. Compare and Contrast Process Improvement Methodologies including Six Sigma and Lean
Managing Process Change Rose Romeo, PhD, FACB Compare and Contrast Process Improvement Methodologies including Six Sigma and Lean Evaluate Case Study (Six Sigma & Lean) Organization Personnel Planning
CCP Recruitment 2015 Salary Survey
CCP Recruitment 2015 Salary Survey Technical & Engineering 2 Pharmaceutical & Medical Devices 3 Accountancy Industry & Support 4 Office Administration 4 Human Resources & Training 5 Supply Chain 6 Information
BUREAU VERITAS TRAINING Sharpening your business edge through training
BUREAU VERITAS TRAINING Sharpening your business edge through training ABOUT US BVC is the global leader in accredited training courses on management systems and provides training on management systems
MSc Total Quality Management & Performance Excellence E543
MSc Total Quality Management & Performance Excellence E543 1. Aims and Objectives Total Quality Management is recognised as an important concept which cuts across all sectors of activities, be it in, public,
Taking the pain out of Risk and Compliance Management Systems. Presented by Andrew Batten 23 April 2015
Taking the pain out of Risk and Compliance Management Systems Presented by Andrew Batten 23 April 2015 Operational Improvement Technology Solutions Providing consultancy services Gap assessments Food standard
Tailoring your Quality Management System in a Competitive Marketplace Heather Driscoll Infor Presales Business Solutions Consultant
Tailoring your Quality Management System in a Competitive Marketplace Heather Driscoll Infor Presales Business Solutions Consultant Copyright 2007 Infor. All rights reserved. www.infor.com. 2 Copyright
Food Safety. Management Systems. Scope of Accreditation
Publication Reference EA-3/11 M: 2009 Food Safety Management Systems Scope of Accreditation PURPOSE This document outlines the EA policy for accreditation bodies when processing accreditation to certification
Textiles. Supervisory Skills in Garment Manufacturing. Leadership for Supervisors. Industrial Engineering A Tool for Productivity Improvement
Textiles Supervisory Skills in Garment Manufacturing Leadership for Supervisors Industrial Engineering A Tool for Productivity Improvement Clothing Production Management Achieving Quality on the Production
Quality System Overview
Quality System Overview Agenda Agenda ISO Registration Flow Down Requirements Governance Contract Supplier Quality Performance Inspection Quality Assurance : Project Verification Compliance CE Marking
Lean Six Sigma for Healthcare
Lean for Healthcare Yellow Belt Green Belt Black Belt Lean Fundamentals Advanced Lean for Healthcare The Lean for Healthcare Yellow Belt program is designed to provide a basic introducti to Lean Six Sigma
Body of Knowledge for Six Sigma Lean Sensei
Body of Knowledge for Six Sigma Lean Sensei What to Prepare For: The following is the Lean Six Sigma Certification Body of Knowledge that the exam will cover. We strongly encourage you to study and prepare
Intelligent development tools Design methods and tools Functional safety
Intelligent development tools Design methods and tools Functional safety Flanders DRIVE Index: Flanders DRIVE 1 Importance of functional safety 2 Functional safety for mechatronic systems 4 Global functional
Budgeting, Planning and Management Reporting Budgeting, Forecasting and Business Planning Building Confidence and Self Esteem Building Effective
MANAGEMENT COURSES Active Listening Skills Administration & Office Management Administrative Management Advanced Accounting Advanced Accounting & Finance Advanced Construction Management, Contracting &