How To Use A Sequence Processor Module

Size: px
Start display at page:

Download "How To Use A Sequence Processor Module"

Transcription

1 <<Contents>> <<Index>> General Specifications FA-M FA-M Value, Value II (including base, power supply, sequence CPU and DI/O modules) CONTENTS FSC-N FA-M Value... FSC-, FSC- FA-M Value II... Yokogawa Electric Corporation GS M0C-0E Copyright Oct. 00 th Edition: Oct. 00

2 Blank Page

3 <<Content>> <<Index>> General Specifications FSC-N FA-M Value (including base, power supply, sequence CPU and DI/O modules) General The FSC-N (FA-M Value) is a compact programmable controller consisting of the following modules: FBU0-0N base module (with slots) FSP0-0P sequence CPU module (with power supply and memory) FWD-N I/O module (with inputs and outputs) SP0-0P RDY RDY RUN CPU WD-N DC I/O DISPAY CN CN ASSY S BK-0 The FSP0-0P double-slot sequence CPU module is installed in the leftmost slot of the FBU0-0N -slot base module and the FWD-N I/O module in slot. You can install any FA-M I/O modules in slots and. Features Its compact size greatly reduces installation space. The sequence CPU module has a 00-0 VAC universal power supply so that the user doesn't have to worry about the power supply environment when using the FSC-N. The high-speed instruction processing capability of the FSC-N makes it ideal for applications that require high speed response. The use of a structured ladder programming language facilitates programming and maintenance of ladder programs. The sequence CPU module has the personal computer link function to communicate with a higher-level computer or display. The user needs no personal computer link module (FC-N) for this purpose. Programs and data can be saved on an optional ROM pack. PROGRAMMER All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

4 << Content >> <<Index>> Specifications Base module (FBU0-0N) Sequence CPU module * (FSP0-0P) Power supply block Sequence CPU block Item Specification slots free I/O slots (as the sequence CPU and -point I/O modules occupy two slots) Weight 0 g Supply voltage 00-0 V AC, single phase, 0/0 Hz Supply voltage fluctuation range - V AC, 0/0 Hz ± Hz Power consumption VA Inrush current 0 A max. (0 V AC, Ta= ºC) A max. (0 V AC, Ta= ºC) Rated output voltage V DC Rated output current.0 A Insulation resistance MΩ or greater at 00 V DC (between external AC terminals and FG terminal) Dielectric strength 00 V AC for minute (between external AC terminals and FG terminal) FAI-signal contact output Provided on the front terminal block on the power supply block; contact rating: V DC, 0. A (both normally-open and normally-closed terminals available) Allowable common-mode 0 V max. AC or DC voltage of FAI-signal contact (between FAI OUTPUT COM terminal and FG terminal) eakage current 0. ma max. Allowable momentary power failure time 0 ms Noise immunity Immune to noise of up to 00 Vp-p with - s pulse width and -ns rise time at -0 Hz (as measured with a noise simulator). Control mode Stored program, cyclic execution I/O control mode Refreshing method/direct I/O instructions Programming language Structured ladder language, mnemonic language Basic instructions types instructions Application types instructions Instruction Basic instructions μs/instruction processing Application speed instructions 0. μs min./instruction Program size K steps (can be stored in ROM) I/O points 0 points max. program blocks max. Sampling trace No ink to personal computer Yes Monitoring of scan time 0-00 ms variable Internal relay I: 0 points max. Shared relay Extended shared relay ink relay : 0 points Special relay M: 0 points Timer T: points max. (total of internal and external timers and counters) Counter C: points max. (total of internal and external timers and counters) Data register D: 0 points max. File register ink register W: 0 points Special register Z: points Index register V: points Shared register Extended shared register Self-diagnostics Memory error, CPU error, input/output error, syntax check, etc. Devices All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

5 << Content >> <<Index>> Sequence CPU module * (FSP0-0P) Input/Output module (FWD-N) Sequence CPU block Input Block Output Block Item Specification Configuration function (device capacity, data lock-up range at power failure, output when CPU stops, etc.) Constant scan function ( ms to 0 ms) Debugging functions (forced SET/RESET, online edit, scan operation, etc.) Other features Error history function ( records) Date/clock function (year/month/day/hour/minute/second/day of week) Program protection functions ROM programming and data storage Personal computer link function Current consumption 0 ma ( V DC) * dimensions (W) X 00 (H) X. (D) mm Weight 0 g Compliance with safety and EMC standards * U CE EMC Directive C-Tick EMC Framework U0 approved, File No.E0 (Overvoltage Category * II, Pollution Degree * ) EN - Class A, Table (For use in industrial locations) EN -- * EN 0 Class A, Group EN 000--, EN 000--, EN compliance EN 0 Class A, Group compliance Input type DC voltage points points/common points/common Isolation method Photocoupler isolation Rated input voltage V DC Operating voltage 0.-. V DC Rated input current. ma/point ( V DC) Operating ON.0 V DC min.,. ma min. voltage/current OFF. V DC max., 0. ma max. Input OFF ON.0 ms max. ON OFF. ms max. Interrupt No Output type Transistor contact (sink type) points points/common points/common Isolation method Photocoupler isolation Rated load voltage V DC Maximum load current 0. A/point, 0. A/common Output OFF ON.0 ms max. Response ON OFF.0 ms max. Off-time leakage current 0. ma max. Surge protector Zener diode power supply V DC, 0 ma Input/output status indicator it when on (indicates either input or output status by using the selector switch) Current consumption 00 ma ( V DC) connection Two 0-pin connectors Weight 0 g *: When a sequence CPU module is to be used, use the adder Diagram Support Program M, Rev..0 or later. *: The total current dissipated by the modules in slots and must be less than 00 ma. *: For details on conforming modules, see U-approved, CE marking and C-Tick mark-compliant Modules (GS M0C-E) general specification brochure. *: The term Overvoltage Category involves prescriptions on resistance to surge voltage reduction due to lightning and has four categories. Overvoltage Category II applies to systems with rated voltage of 0/0/0V and applies to electrical appliances, portable devices, etc. *: The term Pollution Degree represents the degree of pollution with foreign matter, solid, liquid or gaseous, that may produce a reduction of dielectric strength or surface resistivity in the operating environment of the equipment. Pollution degree refers to an environment where normally only non-conductive pollution occurs but occasionally temporary conductivity caused by condensation is to be expected. *: EN -- is applicable only to FCU0-0S and FCU0-S All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

6 << Content >> <<Index>> Base Module and s FBU0-0N slots (excluding slot for power supply) Dimensions slots (FBU0-0N) O mounting hole (for M mounting screw) (When mounted on module surface).. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

7 << Content >> <<Index>> Sequence CPU Module Components and Functions it when power supply is normal Fail-signal contact output Contact ratings: V DC, 0. A During Normal operation Between FAI and COM Open Between FAI and COM Short Subject to grounding resistance of 00Ω max independently (JIS class D grounding, previously class grounding) Connect to FG and grounded RDY ED (green) During System and Power Failures Short Open FG (Frame Ground) G (ine filter Ground) SP0-0P FAI OUTPUT FAI COM FAI FG G RDY RDY RUN AM ERR CPU CPU module maintenace EDs 00-0 VAC Power supply N INPUT 00-0VAC PROGRAMMER Programming tool interface connector FB000.VSD Terminal Dimensions and s. mm M.. mm FSC -N FSP0-0P FA-M Value (with base, power supply, sequence CPU, and DI/O modules) Sequence CPU module (with power supply and memory) Memory: K steps Dimensions Examples of Applicable Solderless Terminals Vender Japan Solderless Terminal Mfg. Co., td. Nippon Tanshi Co., td. Japan Solderless Terminal Mfg. Co., td. Japan Solderless Terminal Mfg. Co., td. V.-M RAV.-. V.-M V-M Applicable Conductor AWG to (0. to 0. mm ) (Copper wire) AWG to (. to.0 mm ) (Copper wire) Applicable Crimping Torque 0. N m CPU Error Processing Different levels of errors are identified by different EDs on the front panel of the CPU module. ED RDY (READY) Green RUN (RUN) Green AM (AARM) Yellow ERR (ERROR) Red Meaning Major failure (when off): The core hardware cannot run. Example: CPU error Memory error When lit: The user program is running. Minor failure (when lit): The user program can still run in spite of a failure. Example: Power failure Communication error Moderate failure (when lit): The user program cannot start or continue execution. Example: Program error* I/O comparison error* I/O module error* Memory error Sequence processor error Instruction processing error* Scan timeout* *: Minor or moderate failure can be defined in the configuration settings. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

8 << Content >> <<Index>> I/O Module (FWD-N) Internal Circuit Diagram Connections Wire connection method Soldered Connector Type 0 Applicable wire size AWG max. (0. mm max.) Internal bus Bus interface COM ~ COM Applicable Connectors Connection Method Soldered type Solderless type Solderless type Applicable Connector Fujitsu FCN-J00-AU connector FCN-0C00-B connector cover Fujitsu FCN-J00 housing FCN-J-AU contact FCN-0C00-B connector cover Fujitsu FCN-J00-AU / F Display selector IN OUT ~ Operating Environment There is no restriction on the type of CPU modules that can be used with this module. Connection Diagram CN (Input block) COM 0 COM 0 B 0 0 A 0 0 COM 0 COM and s FWD -N V DC input/output Note: See the spare parts in the FA-M Range-free Multi-controller (GS MA0-0E) for information on connectors. Dimensions FWD-N CN (Output block) V COM 0 V COM 0 B 0 0 A V COM 0 0 V COM 0 Note: Viewed from the front of the module. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

9 <<Content>> <<Index>> General Specifications FSC-, FSC- FA-M Value II (including base, power supply, sequence CPU and DI/O modules) General The FSC- or the FSC- (FA-M Value II) is a compact programmable controller consisting of the following modules: FSC-F FBU0-0N (-slot base module) FSP0-0P (sequence CPU module) FWD-F (-point I/O module) FSC-F FBU0-0N (-slot base module) FSP0-0P (sequence CPU module) FWD-F (-point I/O module) FSC-A FBU0-0N (-slot base module) FSP0-0P (sequence CPU module) FXD-F (-point input module) FYD-A (-point output module) FSC-F FBU0-0N (-slot base module) FSP0-SP (sequence CPU module) FWD-F (-point I/O module) FSC-F FBU0-0N (-slot base module) FSP0-SP (sequence CPU module) FWD-F (-point I/O module) FSC-A FBU0-0N (-slot base module) FSP0-SP (sequence CPU module) FXD-F (-point input module) FYD-A (-point output module) FSC-P FBU0-0N (-slot base module) FSP0-SP (sequence CPU module) FWD-P (-point I/O module) FSC-P FBU0-0N (-slot base module) FSP0-SP (Sequence CPU module) FWD-P (-point I/O module, V) SP0-0P RDY RDY RUN CPU PROGRAMMER WD-F DC I/O Features Its compact size greatly reduces installation space. The sequence CPU module has a 00-0 VAC universal power supply so that the user doesn't have to worry about the power supply environment. The high-speed instruction processing capability makes it ideal for applications that require high speed response. The use of a structured ladder programming language facilitates programming and maintenance of ladder programs. The sequence CPU module has the personal computer link function to communicate with a higher-level computer or display. The user needs no personal computer link module (FC-N) for this purpose. Programs and data can be saved on an optional ROM pack. CN CN ASSY S BK-0 Install the FSP0- P sequence CPU module in the leftmost slot of the FBU0-0N base module and the other I/O module(s) in slot (or slots and ). The remaining slot(s) is available for a variety of FA-M I/O modules. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

10 <<Content>> <<Index>> 0 Specifications Specifications for FSC and FSC Base module (FBU0-0N) Sequence CPU module * (FSP0-0P, FSP0-SP) * Item Specification slots free I/O slots (for FSC-F, FSC-F, FSC-F, FSC-F, FSC-P, and FSC-P) (for FSC-A and FSC-A) Weight 0 g Supply voltage 00-0 V AC, single phase, 0/0 Hz Supply voltage fluctuation range - V AC 0/0 Hz Hz Power consumption VA Inrush current 0 A max. (0 V AC, Ta= C) A max. (0 V AC, Ta= C) Rated output voltage V DC Rated output current.0 A Insulation resistance M or greater at 00 V DC (between external AC terminals and FG terminal) Dielectric strength 00 V AC for minute (between external AC terminals and FG terminal) Provided on the front terminal block on the power supply block; FAI-signal contact output contact rating: V DC, 0. A (both normally-open and normally-closed terminals available) Allowable common-mode 0 V max. AC or DC voltage of FAI-signal (between FAI OUTPUT COM terminal and FG terminal) contact eakage current 0. ma max. Allowable momentary power failure time 0 ms Noise immunity Immune to noise of up to 00 Vp-p with - s pulse width and -ns rise time at -0 Hz (as measured with a noise simulator). Control mode Stored program, cyclic execution I/O control mode Refreshing method/direct I/O instructions Programming language Structured ladder language, mnemonic language Basic instructions types instructions Application instructions types Basic Instruction s/instruction instructions Processing Application speed 0. s min./instruction instructions Program size 0K steps (can be stored in ROM) I/O points 0 points max. program blocks max. Sampling trace No ink to personal computer Yes Monitoring of scan time 0-00 ms variable Internal relay I: 0 points max. Shared relay Extended shared relay ink relay : 0 points Special relay M: 0 points Timer T: points max. (total of internal and external timers and counters) Counter C: points max. (total of internal and external timers and counters) Data register D: 0 points max. File register ink register W: 0 points Special register Z: points Index register V: points Shared register Extended shared register Self-diagnostics Memory error, CPU error, input/output error, syntax check, etc. Power Supply Block Sequence CPU Block Device All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

11 <<Content>> <<Index>> Sequence CPU module * (FSP0-0P, FSP0-SP) * Sequence CPU Block Item Specification Configuration function (device capacity, data lock-up range at power failure, output when CPU stops, etc.) Constant scan function ( ms to 0 ms) Debugging functions (forced SET/RESET, online edit, scan operation, etc.) Other features Error history function ( records) Date/clock function (year/month/day/hour/minute/second/day of week) Program protect functions ROM programming and data storage Personal computer link function Current consumption 0 ma ( V DC) * dimensions (W) 00 (H). (D) mm Weight 0 g U0 approved, File No.E0 U (Overvoltage Category * II, Pollution Degree * ) EN - Class A, Table (For use in industrial locations) EMC EN -- * Directive EN 0 Class A, Group CE EN 000--, EN 000--, EN compliance Compliance with safety and EMC standards * ow EN 00- compliance (only for FSC- ) Directive (Overvoltage Category * II, Pollution Degree * ) C-Tick EMC Frame-work EN 0 Class A, Group compliance *: When a sequence CPU module is to be used, use the FA-M programming Tool WideField Rev..0 or later. *: The total current dissipated by the modules in slots to must be less than 00 ma. *: FSP0-0P and FSP0-SP have exactly the same dimensions, internal circuitry and other characteristics, except that FSP0-0P uses M.-screw terminals while FSP0-SP uses M-screw terminals. FSP0-SP is compliant to IEC00- and EN00-, but FSP0-0P is not. * For details on conforming modules, see U-approved, CE marking and C-Tick mark-compliant Modules (GS M0C-E) general specification brochure. *: The term Overvoltage Category involves prescriptions on resistance to surge voltage reduction due to lightning and has four categories. Overvoltage Category II applies to systems with rated voltage of 0/0/0V and applies to electrical appliances, portable devices, etc. *: The term Pollution Degree represents the degree of pollution with foreign matter, solid, liquid or gaseous, that may produce a reduction of dielectric strength or surface resistivity in the operating environment of the equipment. Pollution degree refers to an environment where normally only non-conductive pollution occurs but occasionally temporary conductivity caused by condensation is to be expected. *: EN -- is applicable only to FCU0-0S and FCU0-S FSC-F, FSC-F FWD-F Input Type Points Isolation Method Current DC V DC.mA/point Output Type Transistor contact (sink type) Points Photocoupler isolation Rated oad V DC Maximum oad Current 0.A/point 0.A/common Operating / Input Response Time Current ON OFF OFF ON ON OFF Configu Configu.V DC -rable as -rable as V DC min. max..ma min..0ms.ms 0.mA max. max. or max. or ms.ms Output Response Time OFF ON OFF ON ms max. ms max. Surge Protector Zener diode Power Supply V DC 0mA Connection 0-pin connector Connection 0-pin connector * For CPU error, see Severity of Failures and ED Display of FA-M Range-free Multi-controller (GSMA0-0E). FSC-F, FSC-F FWD-F Input Type Points Isolation Method Current DC V DC.mA/point Output Type Points Transistor contact (sink type) Photocoupler isolation Rated oad V DC Maximum oad Current 0.A/point 0.A/common Operating / Current Input Response Time ON OFF OFF ON ON OFF.V DC V DC min..ma min. max..0ms max..ms max. 0.mA max. Output Response Time OFF ON ms max OFF ON ms max Surge Protector Zener diode Power Supply V DC 0mA Connection 0-pin connector Connection 0-pin connector * For CPU error, see Severity of Failures and ED Display of FA-M Range-free Multi-controller (GSMA0-0E). Points/ points/ common Points/ points/ common Points/ points/ common Points/ points/ common HOD/REST Output When Program Stops Default: RESET Configurable on module basis.* HOD/REST Output When Program Stops Default: RESET Configurable on module basis.* All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

12 <<Content>> <<Index>> FSC-A, FSC-A FXD-F Input Type DC (sink/source type) Points Isolation Method Photocoupler isolation V DC Current.mA/ point V DC Operating / Input Response Time Current ON OFF OFF ON ON OFF Configu Configu V DC min..v DC -rable as -rable as.ma min. max..0ms.ms 0.mA max. max. or max. or ms.ms Connection -point terminal block M. screw Points/ points/ FYD-A Output Type Transistor Contact (sink type) Points Isolation Method Photocoupler isolation -V DC Maximum oad Output Response Time Current OFF ON ON OFF 0.A/point A/common ms max. ms max. Surge Protector Zener diode Power Supply -point terminal block M. screw Connection -V DC 0mA * For CPU error, see Severity of Failures and ED Display of FA-M Range-free Multi-controller (GSMA0-0E). FSC-P, FSC-P FWD-P Input Type DC Output Type Transistor contact (sink type) Points Isolation Method Current V DC.mA/point Points Photocoupler isolation Rated oad V DC Maximum oad Current 0.A/point 0.A/common Operating / Input Response Time Current ON OFF OFF ON ON OFF.VDC VDC min. max.,.0ms max..ms max..ma min. 0.mA max. Output Response Time OFF ON ms max. OFF ON ms max. Surge Protector Active clamp Power Supply V DC ma Connection 0-pin connector Connection 0-pin Connector Points/ points/ common points/ common Points/ points/ common Points/ points/ common HOD/REST Output When Program Stops) Default: RESET Configurable on module basis.* HOD/REST Output When Program Stops) Default: RESET Configurable on module basis.* FWD-P Input Type DC Output Type Transistor contact (sink type) Points Isolation Method Current V DC.mA/point Points Photocoupler isolation Rated oad V DC Maximum oad Current 0.A/point 0.A/common Operating / Input Response Time Current ON OFF OFF ON ON OFF.V DC V DC min. max.,.0ms max..ms max..ma min..0ma max. Output Response Time OFF ON ms max. OFF ON ms max. Surge Protector Active clamp Power Supply V DC ma Connection 0-pin connector Connection 0-pin Connector * For CPU error, see Severity of Failures and ED Display of FA-M Range-free Multi-controller (GSMA0-0E). Base Module and s FBU0-0N slots (excluding slots for power supply) Points/ points/ common Points/ points/ common HOD/REST Output When Program Stops) Default: RESET Configurable on module basis.* Dimensions slots (FBU0-0N) O mounting hole (for M mounting screw) (When mounted on module surface) All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

13 <<Content>> <<Index>> Sequence CPU Module Components and Functions it when the power supply is normal. Fail-signal contact output Contact ratings: V DC, 0. A SP0-0P RDY RDY RUN AM ERR CPU CPU module maintenance EDs Between FAI and COM Between FAI and COM During Normal operation Open Short During System and Power Failures Short Open FAI OUTPUT FAI COM Subject to JIS class grounding FG independently. G Subject to JIS class grounding independently for increased noise immunity. Power supply 00-0 VAC FAI FG G N INPUT 00-0 V AC PROGRAMMER Programming tool interface connector Terminal Dimensions. mm FSP0-0P M.. mm. mm FSP0-SP M. mm Examples of Applicable Solderless Terminals Vender Japan Solderless Terminal Mfg. Co., td. Nippon Tanshi Co., td. Japan Solderless Terminal Mfg. Co., td. Japan Solderless Terminal Mfg. Co., td. V.-M RAV.-. V.-M V-M Applicable Conductor AWG to (0. to 0.mm ) (Copper wire) AWG to (. to.0mm ) (Copper wire) Applicable Crimping Torque FSP0-0P FSP0-SP 0. N m Not available. N m CPU Error Processing Different levels of errors are identified by different EDs on the front panel of the CPU module. ED RDY (READY) Green RUN (RUN) Green AM (AARM) Yellow ERR (ERROR) Red Meaning Major failure (when off): The core hardware cannot run. Example: CPU error Memory error When lit: The user program is running. Minor failure (when lit): The user program can still run in spite of a failure. Example: Power failure Communication error Moderate failure (when lit): The user program cannot start or continue execution. Example: Program error* I/O comparison error* I/O module error* Memory error Sequence processor error Instruction processing error* Scan timeout* *: Minor or moderate error can be selected in the configuration settings. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

14 <<Content>> <<Index>> and s FSC -F -F -A FSP0-0P FA-M Value II (with base, power supply (M. screws), sequence CPU, and DI/O (FWD-F) modules) FA-M Value II (with base, power supply (M. screws), sequence CPU, and DI/O (FWD-F) modules) FA-M Value II (with base, power supply (M. screws), sequence CPU, and DI/O (FXD-F, FYD-A) modules) Sequence CPU Module (with power supply (M. screws) and memory), memory: 0K steps FSC -F -F -A -P -P FSP0 SP FA-M Value II (with base, power supply (M screws), sequence CPU, and DI/O (FWD-F) modules) FA-M Value II (with base, power supply (M screws), sequence CPU, and DI/O (FWD-F) modules) FA-M Value II (with base, power supply (M screws), sequence CPU, and DI/O (FXD-F, FYD-A) modules) FA-M Value II (with base, power supply (M screws), sequence CPU, and DI/O (FWD-P) modules) FA-M Value II (with base, power supply (M screws), sequence CPU, and DI/O (FWD-P) modules) Sequence CPU Module (with power supply (M screws) and memory), memory: 0K steps Dimensions. 00 All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

15 <<Content>> <<Index>> I/O Module (FXD-F) Internal Circuit Diagram Operating Environment There is no restriction on the type of CPU modules that can be used with this module. FXD-F (DC input module) and s ~ COM Bus interface Internal bus FXD -F Dimensions FXD-F DC input (sink/source type) V DC, points Connection Diagram FXD-F (DC input module) COM 0 COM 0 Note: Viewed from the front of the module. Connections Terminal Block Applicable conductor 0. to 0. mm Method of connection Temperature rating Solderless C min. Material Solderless terminal Solderless terminal Crimping torque Applicable solderless terminal Copper For. mm screws 0. N m e.g.: Japan Solderless Terminal Mfg.Co.,td. V.-M V.-M V-M Nippon Tanshi Co., td RAV.-. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

16 <<Content>> <<Index>> I/O Module (FYD-A) Internal Circuit Diagram Operating Environment There is no restriction on the type of CPU modules that can be used with this module. FYD-A (Transistor Output Module) and s Internal bus Bus interface ~ COM FYD -A Dimensions FYD-A TR output sink type - V DC, 0.A, points 0 Connection Diagram FYD-A (Transistor Output Module) COM V 0 COM V 0 Note: Viewed from the front of the module. Connections Terminal Block Applicable conductor 0. to 0. mm Method of connection Temperatule rating Solderless C min. Material Solderless terminal Solderless terminal Crimping torque Applicable solderless terminal Copper For. mm screws 0. N m ex: Japan Solderless Terminal Mfg.Co.,td. V.-M V.-M V-M Nippon Tanshi Co., td RAV.-. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

17 <<Content>> <<Index>> I/O Module (FWD-F) Internal Circuit Diagram Operating Environment This module can be used with the following CPU modules: FSP0-0P and FSP0-SP and s FWD -F V DC input/output Note: See the spare parts in the FA-M Range-free Multi-controller (GS MA0-0E) for information on connectors. Dimensions FWD-F Connection Diagram - - V COM 0 COM 0 B 0 0 A 0 0 V COM 0 COM - - Note: Viewed from the front of the module. Connections Connector Type Wire connection method Applicable wire size Soldered AWG max. (0. mm max.) Applicable Connectors Connection Method Soldered type Solderless type Solderless type Applicable Connector Fujitsu FCN-J00-AU connector FCN-0C00-B connector cover Fujitsu FCN-J00 housing FCN-J-AU contact FCN-0C00-B connector cover Fujitsu FCN-J00-AU / F All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

18 <<Content>> <<Index>> I/O Module (FWD-F) Connections Internal Circuit Diagram Wire connection method Soldered Connector Type 0 Applicable wire size AWG max. (0. mm max.) Internal bus Bus interface COM ~ COM Applicable Connectors Connection Method Soldered type Solderless type Solderless type Applicable Connector Fujitsu FCN-J00-AU connector FCN-0C00-B connector cover Fujitsu FCN-J00 housing FCN-J-AU contact FCN-0C00-B connector cover Fujitsu FCN-J00-AU / F Display selector IN OUT Connection Diagram CN (Input block) COM 0 COM 0 B 0 0 A 0 0 COM 0 COM ~ Operating Environment There is no restriction on the type of CPU modules that can be used with this module. and s FWD -F V DC input/output Note: See the spare parts in the FA-M Range-free Multi-controller (GS MA0-0E) for information on connectors. Dimensions FWD-F CN (Output block) V COM 0 V COM 0 B 0 0 A 0 0 V COM V COM 0 Note: Viewed from the front of the module. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

19 <<Content>> <<Index>> I/O Module (FWD-P) Internal Circuit Diagram Connections Wire connection method Soldered Connector Type Applicable wire size AWG max. (0. mm max.) Applicable Connectors Connection Method Applicable Connector Internal bus ~ Soldered type Solderless type Fujitsu FCN-J00-AU connector FCN-0C00-B connector cover Fujitsu FCN-J00 housing FCN-J-AU contact FCN-0C00-B connector cover Solderless type Fujitsu FCN-J00-AU / F Connection Diagram CN (Input block) COM 0 COM 0 B 0 0 A 0 0 COM 0 COM ~ Operating Environment There is no restriction on the type of CPU modules that can be used with this module. and s V DC input/output FWD -P (with short-circuit protector) Note: See the spare parts in the FA-M Range-free Multi-controller (GS MA0-0E) for information on connectors. Dimensions FWD-P CN (Output block) V COM 0 V COM 0 B 0 0 A 0 0 V COM V COM 0 Note: Viewed from the front of the module. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

20 <<Content>> <<Index>> 0 I/O Module (FWD-P) Internal Circuit Diagram Connections Wire connection method Soldered Connector Type Bus Interface Display selector Overheat protector Overcurrent protector IN OUT Constant voltage circuit Connection Diagram CN (Input block) COM 0 COM 0 B 0 0 A 0 0 COM 0 COM 0 COM - COM - - Applicable wire size AWG max. (0. mm max.) Applicable Connectors Connection Method Soldered type Solderless type Solderless type Applicable Connector Fujitsu FCN-J00-AU connector FCN-0C00-B connector cover Fujitsu FCN-J00 housing FCN-J-AU contact FCN-0C00-B connector cover Fujitsu FCN-J00-AU / F Operating Environment There is no restriction on the type of CPU modules that can be used with this module. and s V DC input/output FWD -P (with short-circuit protector) Note: See the spare parts in the FA-M Range-free Multi-controller (GS MA0-0E) for information on connectors. Dimensions FWD-P CN (Output block) V COM 0 V COM 0 B 0 0 A V 0 COM V 0 COM 0 Note: Viewed from the front of the module. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS M0C-0E Oct

NX safety stand-alone

NX safety stand-alone NX-S@ NX safety stand-alone stand-alone into machine automation Expandable safety system up to 32 safety connections or 63 standard connections controller flexible system lets your freely mix safety I/O

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays

More information

RY2 miniature industrial relays

RY2 miniature industrial relays 6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical

More information

CompactLogix Power Supplies Specifications

CompactLogix Power Supplies Specifications Technical Data CompactLogix Power Supplies Specifications 1768 CompactLogix Power Supplies Catalog Numbers 1768-PA3, 1768-PB3 1769 Compact I/O Power Supplies Catalog Numbers 1769-PA2, 1769-PB2, 1769-PA4,

More information

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage

More information

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils

More information

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only

More information

Ordering Information. Cylindrical Proximity Sensor E2E/E2E2

Ordering Information. Cylindrical Proximity Sensor E2E/E2E2 Cylindrical Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened

More information

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0. 48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according

More information

Single-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable

Single-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window

More information

Fixed - Over/Under voltage limits, (0.75...1.2) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits

Fixed - Over/Under voltage limits, (0.75...1.2) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits Features 71.11.8.230.0010 71.11.8.230.1010 1 - Phase 230 V Over & Under voltage monitoring relays 71.11.8.230.0010 - Fixed Over & Under voltage detection - Link selectable 5 or 10 minute lock-out delay

More information

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application 33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection

More information

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection

More information

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order

More information

Digital input modules

Digital input modules 8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy

More information

CQM1-SF200/CS1W-SF200

CQM1-SF200/CS1W-SF200 Safety Relay Unit ( I/O Unit Type) CQM1-SF200/CS1W-SF200 CSM_CQM1-SF200_CS1W-SF200_DS_E_2_1 A Safety Relay Unit That Functions as a I/O Unit. Less Installation Space and Wiring Required. Safety Relay Unit

More information

Product and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.

Product and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information. Product and Applications Description The power supply units N 125/x2 can supply DC 24 V power from an additional pair of terminals (yellowwhite). This DC 24 V output voltage can be used to power e.g. an

More information

MILLENIUM INSTALLATION MANUAL NTR 735 A. Simple Automation Control Module (MAS)

MILLENIUM INSTALLATION MANUAL NTR 735 A. Simple Automation Control Module (MAS) MILLENIUM Table of contents 1. INTRODUCTION 1 2. HARDWARE DESCRIPTION 2 3. INSTALLATION 5 4. CONNECTION 6 5. USER SAFETY AND PROTECTION OF EQUIPMENT 8 1. Introduction The MILLENIUM series has been designed

More information

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main

More information

TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector

TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Product datasheet Characteristics TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus

More information

DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050

DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050 Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic

More information

40 Series - Miniature PCB/Plug-in relays 8-10 - 16 A. Features 40.31 40.51 40.52

40 Series - Miniature PCB/Plug-in relays 8-10 - 16 A. Features 40.31 40.51 40.52 Features 40.31 40.51 40.52 1 & 2 Pole relay range 40.31-1 Pole 10 A (3.5 mm pin pitch) 40.51-1 Pole 10 A (5 mm pin pitch) 40.52-2 Pole 8 A (5 mm pin pitch) PCB mount - direct or via PCB socket 35 mm rail

More information

49 Series - Relay interface modules 8-10 - 16 A. Features

49 Series - Relay interface modules 8-10 - 16 A. Features Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole

More information

650W Single Output Power Supply

650W Single Output Power Supply AK-650 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to 9% + / 0.5A auxiliary output Intelligent

More information

AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models

AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual

More information

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51 34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in

More information

ABB i-bus KNX Switch Actuator, x-fold, 16/20 A, MDRC SA/S x.16.6.1, 2CDG 110 1xx R0011

ABB i-bus KNX Switch Actuator, x-fold, 16/20 A, MDRC SA/S x.16.6.1, 2CDG 110 1xx R0011 , 2CDG 110 1xx R0011 SA/S 8.16.6.1 2CDC 071 006 S0010 The 16/20 A Switch actuators are modular installation devices in Pro M Design for installation in the distribution board. The devices are especially

More information

Three-phase monitoring relay CM-PFE

Three-phase monitoring relay CM-PFE Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics

More information

48 SERIES Relay interface modules 10 A

48 SERIES Relay interface modules 10 A 48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply

More information

DCS Input/Output Relay Card Series

DCS Input/Output Relay Card Series Input/Output Relay Card Series I/O RELAY CARD (with loopback test function) 8N The 8N series I/O Relay Cards easily and quickly standardize and facilitate installation of the relay board. Loopback test

More information

PSU-U-24V/AC-6A/10/FTA-TR-MC PSAC 0624

PSU-U-24V/AC-6A/10/FTA-TR-MC PSAC 0624 PSU-U-24V/AC-6A/10/FTA-TR-MC PSAC 0624 v.1.0 AC/AC power supply unit Edition: 1 from 24 th October 2008 Supercedes edition: ---------- 10062009 CONTENTS: 1. Technical description. 1.1. General description

More information

HFE1600 Series 1600W 1U Hot Swap Front End Power Supplies

HFE1600 Series 1600W 1U Hot Swap Front End Power Supplies 25.2W/in 3 power density Internal ORing MOSFET & Current Share Climate Savers Computing efficiency standards Up to 8000W in 1U rack Single and dual output 1U racks PMBus option HFE1600 Series 1600W 1U

More information

1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit)

1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit) 000W Single Output Power Supply AK-000 series Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output U profile,

More information

38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.

38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6. 38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC

More information

SIMATIC NET. CP 243-2 AS-Interface Master B C. Preface Contents. Technical Description and Installation Instructions Interface to the User Program

SIMATIC NET. CP 243-2 AS-Interface Master B C. Preface Contents. Technical Description and Installation Instructions Interface to the User Program Preface Contents SIMATIC NET CP 243-2 AS-Interface Master Manual Technical Description and Installation Instructions Interface to the User Program 2 in the S7-200 CPU Access to the Data of the AS-i Slaves

More information

Panel Meters and Controllers Modular Panel Meter Type EDM 35

Panel Meters and Controllers Modular Panel Meter Type EDM 35 Panel Meters and Controllers Modular Panel Meter Type EDM 35 Modular digital panel meter, 3 1/2-digit Indicating or controlling current, voltage, resistance, temperature, tacho or frequency. Easy programming

More information

Smart DeviceNet Remote I/O Terminals

Smart DeviceNet Remote I/O Terminals Smart DeviceNet Remote I/O Terminals ather and Use Information for Effective Preventive Maintenance et more useful data for preventive maintenance when you build cost-effective parallel information systems

More information

COM. port RS232C RS232C RS232C RS485. Thermocouple input. Part number. Not available. Not available. Available. Not available Available RS485.

COM. port RS232C RS232C RS232C RS485. Thermocouple input. Part number. Not available. Not available. Available. Not available Available RS485. Control Unit New Born! Advanced PC! Timer, Counter, Hour meter, Temperature Controller and PC in a Unit Features. 5-character, -line, -color Display Simple characters and numerical values can be displayed.

More information

Switch Mode Power Supply S8VS

Switch Mode Power Supply S8VS Switch Mode Supply S8VS 15/30-W Models Compact, Thin Supplies That Mount Just About Anywhere to Contribute to Control Panel Downsizing Compact, thin size: 22.5 85 96.5 mm (W H D). Three mounting directions

More information

650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power

650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output Forced current sharing at parallel operation Power OK signal

More information

g9sp Programmable Safety controllers compact Stand-Alone Programmable controller NEW! example of System configuration G9SP

g9sp Programmable Safety controllers compact Stand-Alone Programmable controller NEW! example of System configuration G9SP Programmable Safety controllers g9sp G9SP compact Stand-Alone Programmable controller Stand-alone safety controller for small and mid-sized machinery Easy programming for complex safety control Three types

More information

ZC-24DO CANopen I/O Module: 24 Digital Outputs

ZC-24DO CANopen I/O Module: 24 Digital Outputs Z-PC Line EN ZC-24DO CANopen I/O Module: 24 Digital Outputs Installation Manual Contents: - General Specifications - Technical Specifications - Installation Rules - Electrical connections - DIP-switches

More information

RISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features:

RISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features: Application : RISH Master 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network & replaces the multiple analog

More information

MAXIMUM LOAD CURRENT 1 A SN SERIES

MAXIMUM LOAD CURRENT 1 A SN SERIES SOLID STATE RELAY (I/O Module) MAXIMUM LOAD CURRENT 1 A SN SERIES RoHS compliant FEATURES I/O modules for interface between CPU and external input devices or loads Ultra slim and light weight, SIL s type

More information

Rack mounted telephone- and leased line modem for industrial applications

Rack mounted telephone- and leased line modem for industrial applications Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as

More information

Relés e Contatores de Estado Sólido SIRIUS

Relés e Contatores de Estado Sólido SIRIUS Relés e Contatores de Estado Sólido SIRIUS Coletânea de dados técnicos ( product data sheet ) Agosto/212 SSR - 3RF21 22,5 mm Ponto Zero SSR - 3RF2 45 mm Ponto Zero SSR - 3RF22 45 mm Ponto Zero Trifásico

More information

ABB i-bus KNX Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG 110 084 R0011

ABB i-bus KNX Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG 110 084 R0011 , 2CDG 110 084 R0011 2CDC 071 112 F0008 The Fan Coil Actuator is a modular installation device (MDRC) in pro M design. It is intended for installation in the distribution board on 35 mm mounting rails.

More information

Cross-beam scanning system to detect slim objects. 100 mm 3.937 in

Cross-beam scanning system to detect slim objects. 100 mm 3.937 in 891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC

More information

HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.

HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000. NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24

More information

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff

More information

Digital Expansion Modules Specifications

Digital Expansion Modules Specifications S7200 Programmable Controller System anual Digital Expansion odules Specifications Table A11 Digital Expansion odules Order umbers Order umber Expansion odel Digital Inputs Digital Outputs Removable Connector

More information

Memory Card (See note.)

Memory Card (See note.) 1H/G-CPU@@H 1-series Programmable Controllers Indicators Inner Board Compartment An Inner Board can be mounted here. Peripheral Port The peripheral port connects Programming Devices, such as a Programming

More information

How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)

How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply) transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control

More information

Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection

Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!

More information

MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features

MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.

More information

40.3. Control Relays and Timers

40.3. Control Relays and Timers .3 Contents EASY500/700/800 Intelligent Relays........ EASY/MFD Expansion Modules............ MFD Intelligent Relays................... EASY/MFD Communication Modules....... EASY/MFD Power Supplies, Accessories

More information

80 Series - Modular timers 16 A. Features 80.01 80.11

80 Series - Modular timers 16 A. Features 80.01 80.11 80 Series - Modular timers 16 A Features 80.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 80.11 - On-delay, multi-voltage 17.5 mm wide Six time scales from 0.1s to 24h

More information

Multifunction Digital Timer

Multifunction Digital Timer Multifunction Digital Timer 1/16 DIN Timer with Easy-to-use Functions Nine output modes accommodate a wide variety of applications. All parameters set by scroll-through menus accessed from the front panel.

More information

Energy Management Energy Meter Type EM23 DIN

Energy Management Energy Meter Type EM23 DIN Energy Management Energy Meter Type EM23 DIN Class 1 (kwh) according to EN62053-21 Class B (kwh) according to EN50470-3 Class 2 (kvarh) according to EN62053-23 Accuracy ±0.5 RDG (current/voltage) Energy

More information

Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.

Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component. Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on

More information

Adjustment functions for both span and shift have been incorporated

Adjustment functions for both span and shift have been incorporated SENSORS FOR SERIES LED Type Wafer Alignment Sensor FX-0-F FT-F9 FD-F7 EX-F70/F60 M SH-7 FD-L4 M-DW The use of a safe LED light beam now allows for high precision detection with a resolution of 0!m (.8

More information

Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles

Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.

More information

Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)

Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,

More information

Programmable Controller G Series. New. Models

Programmable Controller G Series. New. Models Programmable Controller G Series The IMO G6 is a very compact modular programmable controller offering extremely high performance. It is ideal for all applications from process control to machine control

More information

Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

U-shaped Micro Photoelectric Sensor

U-shaped Micro Photoelectric Sensor SERIES U-shaped Micro Photoelectric Extremely small size enables space saving and quick installation! Extremely small Ultra-small type PM- 24(-R) contributes to the miniaturization of your equipment. Even

More information

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw 4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and

More information

Telephone- and leased line modem for industrial applications TD-36

Telephone- and leased line modem for industrial applications TD-36 Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased

More information

Automation System TROVIS 6400 TROVIS 6493 Compact Controller

Automation System TROVIS 6400 TROVIS 6493 Compact Controller Automation System TROVIS 6400 TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and process plants for general

More information

Small U-shaped Micro Photoelectric Sensor. Enables space saving and quick installation!

Small U-shaped Micro Photoelectric Sensor. Enables space saving and quick installation! 4 Small Micro Photoelectric Amplifier Built-in PM-44 SERIES PM-4 SERIES General terms and conditions... F- selection guide... P.44~ Related Information Glossary of terms / General precautions... P.39~

More information

Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ

Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited

More information

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications. Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description

More information

TPM Product Type 107-D162-NNT 48-channel digital input and 16-channel digital output module with pluggable terminal

TPM Product Type 107-D162-NNT 48-channel digital input and 16-channel digital output module with pluggable terminal Product Type 107-D162-NNT 48-channel digital input and 16-channel digital output module with pluggable terminal Specifications Size: (L122 x W123 x H104 mm) Series Interface: Half duplex RS-485 with transformer

More information

Product and functional description

Product and functional description Product and functional description The KNX / DALI gateway N 141/02 is a 4 MU wide, DINrail mounted KNX device with one DALI interface to which up to 64 DALI actuators (e.g. DALI ballasts) can be connected

More information

Control Devices Catalogue. Control Devices. Preferred and Standard Products

Control Devices Catalogue. Control Devices. Preferred and Standard Products Control Devices Catalogue Control Devices Preferred and Standard Products KOP.J Timer Electronic 22.5 mm Characteristics Mounting KOP.J 22.5 mm mono or multifunction high immunity to interference surface

More information

15 Series - Electronic step relay and dimmer. Features 15.91 15.51 15.81 SERIE

15 Series - Electronic step relay and dimmer. Features 15.91 15.51 15.81 SERIE Series - Electronic step relay and dimmer SERIE Features.91.51.81 Electronic step relay and dimmer for control of lighting levels Suitable for incandescent and halogen lighting loads (with or without transformer

More information

EXTERNAL DIMENSIONS AND PARTS

EXTERNAL DIMENSIONS AND PARTS FX2N-4DA SPECIAL FUNCTION BLOCK USER S GUIDE JY992D65901A This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N-4DA special

More information

RM4TG20 three-phase network control relay RM4-T - range 200..500 V

RM4TG20 three-phase network control relay RM4-T - range 200..500 V Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking

More information

Fieldbus slave modules with I/Os, DIO

Fieldbus slave modules with I/Os, DIO 140 Fieldbus slave modules with I/Os, DIO 1534CF00 1534CH00 1534PF00 1534PH00 1536CH00 1536CL10 1536PH00 1536PL00 Order number 1534CF00 1534CH00 1534PF00 1534PH00 Figure Type SM 153, CANopen slave, DIO

More information

CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@

CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ New Product SYSMAC CP-series CP1E CPU Units CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ The CP1E Package PLCs: Economical, Easy to use, and Efficient The E-type Basic CPU Units provide cost performance and easy

More information

Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1

Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1 Power Supply Unit, Primary Switched, Narrow Design MINI POWER provides: Extra narrow design with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide-range input

More information

1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES

1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled M BASIC 1 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver for manual testing SEV for output voltage < 60 V DC ow-profile casing (21 x 30 mm cross-section) 5-year

More information

Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001

Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001 Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.

More information

3-phase, bidirectional energy meter

3-phase, bidirectional energy meter Data sheet www.sbc-support.com 3-phase, bidirectional energy meter with S0 pulse output Bidirectional energy meter with S0-interface. The S0 interface is a hardware interface for the transmission of measured

More information

Solid State Relays for Heaters

Solid State Relays for Heaters New Product Solid State Relays for Heaters Single-phase G3PE Compact, Slim-profile SSRs with Heat Sinks. Models with No Zero Cross for a Wide Range of Applications. RoHS compliant. Models also available

More information

TX OPEN RS232/485 module

TX OPEN RS232/485 module s 8 185 8185P01 TX-I/O ; DESIGO OPEN TX OPEN RS/485 module for integrating third-party systems and devices to DESIGO (V4 or higher) TXI1.OPEN Platform to integrate third-party systems and devices to the

More information

Silvertel. Ag5200. 1 Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W output power

Silvertel. Ag5200. 1 Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W output power Silvertel V1.1 November 2012 Datasheet Pb 1 Features IEEE802.3at and IEEE802.3af compliant Maximum 30W output power Dual In-Line (DIL) package size 50.6mm (L) x 30mm (W) Overload, short-circuit and thermal

More information

Specifications for EM223 24 VDC 4 In/4 Out and EM223 24 VDC 4 In/4 Relay Out

Specifications for EM223 24 VDC 4 In/4 Out and EM223 24 VDC 4 In/4 Relay Out SIMATIC S7-200 EM223 Digital Combination Modules EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out Table 1 Specifications for EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out EM223 2VDC In/Out 6ES7 2231BF200XA0

More information

PHOENIX CONTACT - 2012-12-14. Features

PHOENIX CONTACT - 2012-12-14. Features Electronic monitoring relay for phase sequence, phase failure, and asymmetry monitoring Data sheet 101748_en_03 1 Description PHOEIX COTACT - 2012-12-14 Features Increasingly higher demands are being placed

More information

ABB i-bus EIB / KNX EIB Monitoring Unit EUB/S 1.1

ABB i-bus EIB / KNX EIB Monitoring Unit EUB/S 1.1 Product Manual ABB i-bus EIB / KNX EIB Monitoring Unit EUB/S 1.1 Intelligent Installation Systems This manual describes the function of the EIB monitoring module EUB/S 1.1 with the Application program

More information

Shutter Actuator Standard, 4-fold, 230 VAC, MDRC RA/S 4.230.1, GH Q631 0076 R0111. ABB i-bus EIB

Shutter Actuator Standard, 4-fold, 230 VAC, MDRC RA/S 4.230.1, GH Q631 0076 R0111. ABB i-bus EIB , GH Q631 0076 R0111 2CDC 071 240 F0003 The Shutter Actuator Standard is used to control a maximum of four independent 230 VAC drives for positioning shutters, blinds, awnings and other hangings as well

More information

Allen-Bradley/Rockwell

Allen-Bradley/Rockwell MANUFACTURER DATA SHEET High Speed Counter Manufacturer: Allen-radley/Rockwell Model Number: 1746-HSCE See www.geomartin.com for additional PDF datasheets Martin Part Number: E-014901-03 VendorPartNumber:

More information

LCD Readout Digital Pressure Switch

LCD Readout Digital Pressure Switch LCD Readout Digital Pressure Switch Series ZSE3 (For )/E3 (For Positive Pressure) For General Pneumatics Easy pressure setting with the digital display RoHS Can be integrated with a vacuum unit, Series

More information

Cable Plug acc. to DIN EN 175301-803, Form A

Cable Plug acc. to DIN EN 175301-803, Form A Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with

More information

4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type code. TBPN-L1-FDIO1-2IOL Ident no. 6814053.

4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type code. TBPN-L1-FDIO1-2IOL Ident no. 6814053. PROFINET slave Integrated Ethernet switch 100 Mbps supported 2 x M12, 4-pin, D-coded, Ethernet fieldbus connection Glass-fiber reinforced housing Shock and vibration tested Potted module electronics Protection

More information

CPU systron S 200 - S 250 - S 250c. systron S 200 - S 250 - S 250c. CPUs to the process modules. Stand-alone PLC

CPU systron S 200 - S 250 - S 250c. systron S 200 - S 250 - S 250c. CPUs to the process modules. Stand-alone PLC E031019 000823 systron S 200 - S 250 - S 250c CPU systron S 200 - S 250 - S 250c 45 mm width Flexible and expandable Easy to use software for bus connection (S 250/ S 250c) CPUs to the process modules

More information