MACHINERY AND EQUIPMENT

Save this PDF as:

Size: px
Start display at page:

Download "MACHINERY AND EQUIPMENT"

Transcription

1

2 РЕКЛАМА

3 JVC «Uz CLAAS Agro» Grain Combain «DOMINATOR 130» Characteristics Engine Manfacturer Type Number/volume of cylinders Total power (by EWG 80/1296) Available capacity (by ECE R24) Fuel tank volume Cutter Modification and width of capture Distance between cutter and screw Inclined chamber Frequency of cutting Threshing drum Stone catching tray Thrashing drum width Trashing drum diameter Thrashing rdum rotation speed Grain bunker Volume Cutter length Width Hight with cabit Wheel base E clearance: at 18, PR and 11,5/80-15,3 till basement till hanger of air blower Combine track (regulated stepwise): front at 18,4-30R1 rear stiff steering axle at 11,5/80-15,3 at 12,5/80-18 relocatable steering axle at 11,5/80-15,3 Weight PERKINS Perkins 1006-T6 In-line 6/6 l 112 kw (152 h.p.) 104 kw (141 h.p.) 200 l С-420 (4.27 m) 580 mm Chain trasporter 1 060/min. Serial mm 450 mm rpm l (about 2.5 t of wheat) mm mm mm +435 mm +460 mm mm mm mm mm mm mm kg Grain combine «TUCANO 430» Characteristics Engine Manufacturer Type Number/volume of cylinders Engine power (ECE R 120) Nominal speed Fuel tank volume Standard cutting Modification and width of capture Distance between cutter and screw Frequency of cutting Cutter VARIO Modification and width of capture Distance between screw and regime apparatus Threshing drum Thrashing drum width Trashing drum diameter Thrashing drum rotation speed Grain bunker Volume Delivery elevator rotary angle Output of delivery Separation Number of strawshaker keys Number of strawshaker steps Strawshaker length Strawshaker area Separation area Weight Weight (might differ based on equipment) without cutter, breaker and straw-spreader Tires Front Rear Chassis 4 TRAC Mercedes Benz OM 906 LA In-line 6/6,4 l 190 kw (258 h.p.) rpm 500 l C900(9,12m), C750(7,50m), C660(6,68 m), C600(6,07 m), 580 mm 1 120/min. C540(5,46 m), C490(4,92m), C430(4,32m), C370(3,71m) V 660 (6,68 м) mm, for rape mm mm 450 mm rpm l 98 degrees 75 l/sec 5 4 4,4 m 5,8 m2 7,26 m2 434, Buyuk Ipak Yoli street, Mirzo Ulugbek district, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Fax: (99871) , kg 620/75 R /70 R 24 41

4 Furrow Ploughing Tractor «ARION 630С» Tractor «AXION 850» Characteristics Engine Manufacturer DPS Number of cylinder/type 6/T Swept volume sm3 Nominal speed rpm Power at nominla speed 107/145 kw/h.p. Max. power 114/155 kw/h.p. Max. power at turning speed kw/h.p. Sustained power 550 kw/h.p. Engine speed at max. torque rpm Max. torque 630 Нм Fuel tank capacity 280 l Gearbox Max. speed 40 km/h Number of gears 4 Number of gear groups with electronic control 4 Number of gears (V/R) 16/16 Rear hinge Maximum payload kg Length Wheelbase mm Distance between rear axle and lower arm mm Length (with front ballast and coupling) mm Hight Rear wheels 20,8 R 38 Front wheels 16,9 R 28 Center of rear axle - upper bead of cabin mm Total hight mm Weight Without ballast kg Ballast max. weight of factory production 804 kg Load distribution with ballast 50/50 % Max. permitted mass (option 40 km/h) kg Characteristics Engine Manufacturer DPS Number of cylinder/type 6/TI Swept volume sm3 Nominal speed rpm Power at nominla speed 171/233 kw/h.p. Max. power 175/238 kw/h.p. Max. power at turning speed rpm Sustained power 600 rpm Engine speed at max. torque rpm Max. torque Нм Fuel tank capacity 503 l Gearbox Max. speed 40 km/h Number of gears 6 Number of gear groups with electronic control 4 Number of gears (forward, back) 24/24 Hydraulic system Delivery at nominal speed, standard (option) 110 (150) l/min Max. working pressure 200 bar Number of hydraulic distributor s sections EH (min. - max.) 3-8 Number of hydrodistributor s mechnical sections (min. - max.) 3-4 Rear hinge Maximum towing capacity kg Stroke 850 mm Front hinge Lifting force 3,3/5,4 t Hydraulic plugs max. 5 Dimensions Rear wheels 620/70 R 42 Front wheels 480/70 R 30 Total hight mm Center of rear axle upper edge of cabin mm Wheel base mm Distance between rear axle and lower arm 1353 mm Length (with front ballast and coupling) mm Weight Rear wheels 580/70 R 42 Front wheels 480/70 R 30 Mass wihout ballast kg Max. front ballast without front lifter kg Weight distributio with balast 50/50 % Maximum permitted total mass (version 40 km/h) kg 42

5 Furrow ploughing tractor «AXOS 340C» Baler «МАРКАНТ 55» Characteristics Technical specifications Engine Manufacturer PERKINS Number of cylinders/type 4/T Cylinder capacity sm3 Cylinder stripping and diameter 105/127 mm Power at nominal speed. 75/102 kw/h.p. Power at nominal rated speed 74/100 kw/h.p. Nominal speed rpm Turns at maximum operating torque rpm Maximum torque 410 Нм Fuel tank capacity 145 l Gear box Manufacturer CLAAS Max. speed 40 km/h Mechanical gear 5 Number of gears (V/R) 10/10 Rear hinge Max. payload kg Dimensions (standard tires) Rear wheels 16.9 R 38 Front wheels 13.6 R 28 Hight with lowered roof mm Distance from center of rear axle till edge of cover 1 761mm Length Wheel base mm Total length (without mounted front systems) mm Total length (with front weights and rear coupling) mm Weight Weights without brackets for weight and ballast kg Ballast weight with factory brackets kg Ballast weight distribution 47/53 % Total permissible weight (with max.load) kg Characteristics Capture width 1,65 mm Delivering bodies: internal capturers external capturers with 3 teeth with 2 teeth Number of pistone strokes per minute 93 Pressing channel dimensions (width х hight) 460 x 360 mm Bale length 0,40 1,10 m Tractor power, not less than 33/45 kw/h.p. Number of tying-in machines 2 Box bobbin for tying-in string 6 Serial bars set: right left Dimensions of slope tray Width Hight Track width Weight Additional supplies are available for: 10,0/ PR 11,5/80 15,3 6 PR 5,45 m 2,54 m 1,41 m 2,19 m kg - Rotating towing handle with hydraulic circuit (dual operation); - Lifting mechnisms for hydraulic colelctor (single operation); - Supporting wheel for collector 43

6 JSC «Tashkent Tractor Plant» 434, Buyuk Ipak Yuli street, Mirzo Ulugbek district, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) HS code Appearance Universal ploughing tractor ТТЗ Towing class - 1,4 Axle configuration - 4К2 Engine capacity - 59,6 kw (81 h.p.) Construction mass kg Dimensions: length mm, width mm, hight mm Cotton tractor ТТЗ Tractor, tipper trailer 2ПТС-4-793А-03А Double deck semitrailer for transportation of cars (Autotrailer) Towing class - 1,4 Axle confirguration - 3К2 Engine capacity - 59, 6 kw (81 h.p.) Construction mass kg Dimensions: length mm, width mm, hight mm Payload kg Mass with patched on sides kg Inclination of lifted platform - 50 degrees Wheel track mm TSh : Semitrailer for transportation of containers TSh : Excavator with blade ТТЗ-2302 Road repairing machine МДР-82 Cesspool, tractor drawn machine ТАМ-4 Irrigating, drawn machine ТСМ-3,45 Operational weight kg Engine capacity - 57,4 kw Highest travel speed - 20 km/h Dimensions: length mm, width mm, hight mm Towing class - 2,0 Wheel track mm Max. towing force of driving stroke - 50 kn Operational weight kg Dimensions: length mm, width mm, hight mm Cet capacity of water tank - 4,1 m 3 Pumping pressure - 0,06 MPa Dimensions: length mm, width mm, hight mm Nominal tank capacity - 3,45 m 3 Pump flow rate - 50 m 3 Pump pressure - 0,29 MPa Beehive transportation pavillion АХР-36 Number of transported beehives - 36 p. Weight of transported load kg FE LLC «AGROMACHHOLDING-TASHKENT» 4a, Abay street, Shayhontahur disctrict, Tashkent city, Republic of Uzbekistan Tel.: (99871) ion starts Caterpillars

7 JSC TZ «Compressor» 116, Usta-Shirin street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Purpose Oil-based filtering element TSh :2005 Fuel-based filtering element TSh :2005 Air-based filtering element TSh :2005 Low capacity, piston, compressor units TSh :2006 To be installed fluid and air cleaning systems fr internal combustion engines LLC «Chust Mash» 46, Chustiy street, Chust city, Namangan region, Republic of Uzbekistan Tel.: (99869) , Fax: (99869) HS code Graphite brushes for electric engines ГОСТ Brush holder for praphite brushes ГОСТ Twin-gripper bearing puller ГОСТ Mortise cylinder lock ГОСТ JSC «Dalvarzin tamirlash zavodi» Dalvarzin settlement, Bekebad district, Tashkent region, Republic of Uzbekistan Tel.: (99870) , Fax: (99870) Purpose Harrow БЗС-1,0 Soil ripper in agriculture Center hoe Soil processing in agriculture CASE combaines blade Spare parts for tractor pools EC «Bukhorotamirlash» 1, Kh. O. Mokhitobon street, Bukhara city, Bukhara region, Republic of Uzbekistan Tel.: (99865) Fax: (99865) Tip НКУ 547 Cultivator wheel KmХ 110 Tip ККО 503 Moldboard П-401 Cultivator pawl КД 924 Harrow tooth БЗС-1,6 Chisel pawl НКУ 474 Brake drum JSC «Bukhara Maintenance-Mechanical Plant» 2, S. Yureneva street, Bukhara city, Bukhara region, Republic of Uzbekistan Tel.: (99865) Fax: (99865) Designation Spare parts for boring, oil-gas production, geo-exploration equipment, restoration of units and parts, steel works, gray cast iron products In compliance with technical requirements of the plant NHC«Uzbekneftegas» JVC «Bakhtselmash» 2, Sh. Rashidov street, Bakht city, Syrdarya district, Syrdarya region, Republic of Uzbekistan Tel.: (99867) HS code Mineral firtilizers spreader РМУ-0,5 TSh :2007 Plough share

8 JVC «Karshiradiator» 27, Khamza street, Beshkent city, Kashkadarya region, Republic of Uzbekistan Tel.: (99875) , Fax: (99875) Different modification radiators TSh :2009 JSC «Plant Agregatniy» 117, Usta-Shirin street, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Fax: (99871) Pic. 1 Pic. 2 Pic. 3 Pic. 4 Pic. 5 HS code Appearance Cotton, ventilator spraying machine ОВХ 600 Tsh : Pic. 1 Rotor mower -1,5Г Tsh : Pic. 2 Cotton seeder СЧХ-4Б Tsh : Pic. 3 Mineral fertilizer broadcaster Tsh : Cotton dresser PChM-4Б Pic. 4 Chisel plow 270/ Pic. 5 LLC «Khorazmmahsustuzatish» 61, Tasj=hauzskaya street, Urgench city, Khorezm region, Republic of Uzbekistan Tel.: (99862) Fax: (99862) Side box Bearing cap Клаас Hub Т CVT disk Клаас Brake drum Body С1 Tightening body Б/р Lowshare / Tightening body М/р Chain gear z =7, 9 Клаас , Pressure plate Б/Р Runner ПГ-35 Cap б/кар Hammer Клаас Hub bolt Jack case с1 Runner АНП В Trailer hub Sleeve ПГ-35 Bearing body Клаас Sleeve СНП АНП Dump Квернеланд JSC «Kokand Mechanical Plant» 1, Kogozgarlik street, Kokand city, Ferghana region, Republic of Uzbekistan Tel.: (99873) Fax: (99873) HS code Underground liquefied gas tank of 5 m³ capacity. TSh :2006 Household gas tanks ГОСТ Pump rods TSh : Stopcock, 2-3 move Bushings TSh : Pistons TSh : Pins УМК TSh :

9 РЕКЛАМА

10

11 LLC «TTEMZ» 1, Ziyolilar street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) HS code Crane truck КС-55724А TSh : Crane truck КС-4574-М TSh : Crane truck КС-3577 TSh : Tower crane КБ-403А TSh : Auto-tower for crane manipulator KmУ SCS 335 TSh : Auto-tower for crane manipulator KmУ SCS 736 TSh : Tank lorry for process water and techncial fluids АЦТВ-4, АЦТВ-8, АЦТВ-12 TSh : Tank lorry - gasoline tanker for milk and potable water АЦСН-8, АЦСН-10 TSh : Tank lorry for milk and potable Автоцистерна для молока и питьевой воды АЦПВ-4, АЦПВ- 8, АЦПВ JSC «Toshkishlokmash» 2, Khamza street, Khamza district, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Designation Presowing leveler TEA-10 TSh :2005 Soil processing equipment Heavy, cotton, tooth harrow БЗТХ-1 TSh :2001 Chemicals sprayer КП-40Т TSh :2006 Plant protection chemicals spraying equipment Cotton harvesting machine МХ-1,8 TSh :2007 Mechanized cotton harvesting Cotton harvesting machine МХ-2,4 TSh :2007 LLC «RUSART» 92, Sayram ave., Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Saw gin 5ДП-130М ОСТ Тst Unversal ginner unit УХК-М ОСТ Тst Uniflow fibercleaner 1ВП-М ОСТ Тst Saw linter 5ЛП-М ОСТ Тst Cotton fiber condensor 5КВ ОСТ Тst Roller gin ДВ1-М ОСТ Тst JSC «Chirchikselmash» , A. Navoi ave., Chirchik city, Tashkent region, Republic of Uzbekistan Tel.: (99870) Fax: (99870) HS code Universal cotton cultivator КХУ-4Б Tsh : Universal chisel-cultivator ЧКУ-4А Tsh : Universal ditcher-leveler КЗУ-0,3Д Tsh : Ridger ГХ-4 Tsh : Harrow БО Plough ПН-3-30 Tsh : Plough ПНЯ

12 JSC «Uzbekhittash» 8, Mendeleeva street, chirchik city, Tashkent region, Republic of Uzbekistan Tel.: (99870) Fax: (99870) Electric motor hydraulic pump package, type ЦНС 300/600 Согласно ГОСТ и ТУ Centrifugal explosion-protected medium pressure fans TSh :2002 Centrifugal high pressure fans TSh :2006 Electric motor hydraulic pump package, chemical type Х TSh :2004 Electric motor hydraulic pump package, type К TSh :1995 Electric motor hydraulic pump package, faecal, type НФГ TSh :2005 Electric motor hydraulic pump package, semisubmersible, type НПП TSh :2005 Electric motor hydraulic pump package, type Д TSh :2005 Electric motor hydraulic pump package, type НЦСГА TSh :2001 Multistage gas turbo-compressors TSh :1996 Air and gas turbo-compressors TSh :1997 Single-stage air turbo-compressors TSh :1997 Single-stage gas turbo-compressors одноступенчатые TSh :1998 Gas turbo-compressor TSh :2002 Liquid packed ring pumps, vacuum TSh :1996 Oil-flooded screw compressors Oil-free compressors Piston compressor Mobile screw compressors Stationary screw compressors LLC «Neftgazkipavtomatika» 107A, Amir Temur street, Tashkent city, Republic of Uzbekistan 107А Tel.: (99871) , Fax: (99871) Painting unit with electrical drive Painting unit with benzine drive Painting unit with pneumatic drive Wrenches with hydraulic impulse/with angular screwdriver head, polishing and cutting tool Association «Uzagromashservis» 4a, Abay street, Tashkent city, Republic of Uzbekistan Tel.: (99871) capacity from 2,2 up to 180 kw; pressure from 7,5 to 13 bar; output from 240 till l/min capacity from 1,5 to 55 kw; pressure from 4 to 13 bar; output from 126 till 9800 l/min capacity from 3 to 7,5 kw; pressure from 10 to 15 bar; output from 367 till 1210 l/min output from 2,0 m³/min and up to 27 m³/min; pressure from 7 till 14 bar average operating pressure bar; average output 1,6 l/min output from 2.4 to 9,5 l/min; average operating pressure bar output from 1,1 to 15 l/min; average operating pressure bar Spare parts for cultivators and chezels Согласно ГОСТ и ТУ Spare parts for harrow Согласно ГОСТ и ТУ Spare parts for ploughs Согласно ГОСТ и ТУ Cotton cultivators, repaired TSh :2001 Tractor trailers, repaired TSh :2001 Two-level ploughs, mounted and towed TSh :2001 Cotton Seeder, repaired TSh :2001 Plants chemical protection machiines and their assembly, repaired TSh :2001 Grain combine Case and its components, repaired TSh :2001 Special combines and their assemblies, repaired TSh :2001 Rotor mowers and breakers and their assemblies, отремонтированные TSh :2001 Mobile pumping stations and their assemblies, repaired TSh :

13 JVC «SPZ-BEARINGS» 3, Karasu street, Akhunboboev city, Andijan region, Republic of Uzbekistan Tel.: (99874) , Fax: (99874) Bearing 3652 (22352) roller type, radial-spherical, with cylindric hole ГОСТ Bearing 322 (6322) roller type, radial, single-row, with cylindric hole Bearing roller type, double row, with conical hole CIS standards compliant Bearing 8240 roller type, radial-thrust JSC «Andijan Research-Testing Plant» 87, Navoi street, Andijan city, Andijan region, Republic of Uzbekistan Tel.: (99874) Fax: (99874) Назначение Boring pump piston rod F-1600 KSt :2007 Boring pump piston valve F-1600 KSt :2007 Solid boring pump pistons KSt :2007 JSC «Uzbekkishlokmash» 160, Dj. Obidova street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Spare parts for boring machines and equipment Grain pneumatic seeder PDE-5.4 TSh :2005 Cotton modular seeders СМХ-4 TSh :2005 Straw skewing and stacking machines МСУ-2,0 TSh :2006 JSC «SUVMASH» 13, Khusayn Baykaro street, Bektemir district, Tashkent city, Republic of Uzbekistan Tel.: (99871) , , Fax: (99871) Pumping station А40ГЦ-0,55/21 ТSh :2006 Pumping station СНЭ 200/5 ТSh :2008 Pumping station А50ГО-0,5/10 ТSh :2009 Pumping station А30ГЦ-0,3/7 ТSh :2006 Borehole type, electric motor hydraulic pump package «ЭЦВ» TSh :2002, TSh :2003 Centrifugical units of double-sided inlet, type «Д» TSh :2002 Electric motor hydraulic pump packages, type «К» ТSh :2009 Semisubmerged mobile unit УПП200/5 Tsh :2001 Centrifugical console singe-stage soil pump ГрУ 400/20 Tsh :2009 Control cabinets «АСКАД» Tsh :2001 Pump Д TSh :2002 Pump impeller ОПВ5-110 ГОСТ LLC «Tegirmon novvoykhona jihozlari» 37A, Nigora street, YangiObod ave., Tashkent city, Republic of Uzbekistan Tel.: (99871) , Fax: (99871) Length,m 8,12,16; Width,mm 850; Hight, mm 1600; Mobile belt conveyor ПЛТ-8,12,16 Belt width,mm 500; Electric powered drive; Electric motor, kw-4; rph-1000 Pinion gears for rolling units Z from 18 till 58 Pulley 400-4Б Diameter, mm 400; Width,mm 82; Number of flutes - 4 Cyclon cell system 4БЦШ 4БЦШ

14 JSC «Uzbekugol» 1, Istiklol street, Angren city, Tashkent region, Republic of Uzbekistan Tel.: (99870) , Fax: (99870) , HS code Spare parts for open-mine excavator ЭKg-12,5 (15), ЭKg-4,6Б (5А), ЭKg-8И (4У), ЭШ-10/ Spare parts for reduction gear РЛКУ-250, РМ-1000 экскаватору ЭKg-4,6Б (5А) Spare parts for reducer of scraper conveyor СП-63, СП-63М, 1С Spare parts for for reducer of taped conveyor 1Л Spare parts for tippler cars (dumpcar) 2ВС Spare parts for centrifugal pumps ЦНС Spare parts for material mining equipment Screw conveyor, diameter 300, 450 mm Cotton flat-belt conveyor, grade ТХЛ600Б, 8ТХСБ Seed flat-belt conveyor, grade 4 ТЛСБ Elevator 1 ЭХС Elevator ЭС-14м, modernized Air-cleaning whirler, 6 cube JSC «Samarkandhlopkomash» 14, Uzbekskiy trakt street, Chupon-ota ave., Samarkand city, Samarkand region, Republic of Uzbekistan Tel.: (99866) Fax: (99866) LLC «Podyomnik» output t/h, for seeds - 12, sor - 4; flight rotation speed rpm; - stalled capacity kw; length, mm ; hight, mm - 525; width, mm output t/h - 12; drive pulley rotation speed 160 rpm; installed capacity 4 kw; length, mm ; hight, mm 1310; width, mm 650 output t/h - 10; drive pulley rotation speed 160 rpm; installed capacity 4 kw; length, mm ; hight, mm 830; width, mm 500 output t/h for cotton 22, seeds - 38; drive pulley rotation speed 112 rpm; installed capacity 4 kw; length, mm 1836; hight, mm ; width, mm 500 output t/h for cotton 8, seeds - 14; drive pulley rotation speed 112 rpm; installed capacity 4 kw; length, mm 1650; hight, mm ; width, mm 500 output 6m 3 /h; dustcatching effect 88 %; installed capacity 1,1 kw; length, mm 4050; hight, mm 7310 JSC «Kugaytamirlash» Kugay settlement, Khamza c/c, Uchkurganskiy district, Namangan region, Republic of Uzbekistan Tel.: (99869) Purpose Big scalper Case С6 Parts to agricultural machinery Case Small scalper Case С5 Parts to agricultural machinery Case 45, Zebo Shamsutdinova street, Khamza district, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Special electrical bridge cranes: TSh :2005 а) magnetic, payload 10 tn б) magnetic-claw, payload 5 tn в) claw, payload from 5 to 10 tn г) with two trolleys, payload tn д) magnetic, payload tn (with two trolleys) Electrical bridge hook cranes, payload 5-20/5 tn TSh :95 Electrical hook gantry cranes, payload up to 25 tn, with span up to 32 m TSh :95 Stationary electrical console cranes, payload 1-2 tn КSt :2005 Manual gantry cranes, payload 1,5 tn TSh :2004 Single-girder, underslung, bridge cranes, payload from 1,0 up to 5,0 tn ГОСТ

15

16

17 LLC «Kompressor pnevmotehnika» 16, Usta Shirin street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Compressors ВР-8/2,5 TSh :2007 Compressor station ПР-8/0,7 TSh :2007 JSC «VMKV-Agromash» 210, Sultanali Mashkhadiy street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Stalk breaker with spreader, mounted СИ-3,6 TSh :2000 Pumping equipment spare parts Rotor and pumps capital repair LLC «SUVMET» 23, Namanganskaya street, Chust city, Namangan region, Republic of Uzbekistan Tel.: (99869) JVC LLC «RULE ASIAN MARKETING» 66/14, Sh. Rashidov ave., Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) High pressure tube ГОСТ LLC «GRINTEK» Electric motor capital repair Bitumen felt РКППЗ-350 Ulugbek settlement, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Combined filter for water ФБК-1-23 TSh :2006 JVC LLC «UzCasemash» 2, Akhangara highway, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Universal pneumatic seeder Case 1200 TSh :2005 JSC «SUVSANOATMASH» 120, Usta Shirin street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Mobile, container building ТSh : 2008 Trailer heavy duty ЦП:ИН 5006 TSh : 2008 Drainage pipes flusher, trailer type ПДТП 200 TSh :2006 Screw hoists, model В-83 with manual drive TSh 46-24: 1998 Screw hoists, model В 83 with electric drive TSh 46-23: 1998 Fuel tanker cistern, calibrated АЗС ПЦ- 4,0 2ПТС TSh :

18 JVC «AGRIHIM» 210, S. Mashkhadiy street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Unversal sprayer UCH-150, UCH-200 TSh :2005 Knapsack, pneumatic sprayer with motor ОРПД-12М TSh :2001 Sprayer-car with motor ОДК «Карриола» TSh :2004 Blower sprayer, universal VP-1 TSh :2006 Manual sprayer ОП-201 «Леонора» TSh :2001 LLC «Ok-Yer ХХI» 1, U. Yusupova street, Kuygan-yer city, Andijan district, Andijan region, Republic of Uzbekistan Tel.: (99874) Fax: (99874) Press collector of straw ППС-1,6 Б TSh :2007 JSC «Kattakurgon yog moy» 121, D. Ishbekova street, Kattakurgan city, Samarkand region, Republic of Uzbekistan Tel.: (99866) Fax: (99866) HS code Pouring crane СКТ 10 TSh 86-14: LLC «Magnit PKTs» 64, Gurlenskaya street, Magnit city, Amudarya region, Karakalpakstan Tel.: (99861) , Spare parts for agricultural machinery Spare parts for farming machines LLC «DAICHI AGROMACHINE» b/n, Dashtobod makhalla, Zaamin district, Djizzak region, Republic of Uzbekistan Tel.: (99871) JSC «Urgenchkorttash» 26, Khankinskaya street, Urgench city, Khorezm region, Republic of Uzbekistan Tel.: (99862) Fax: (99862) Mounted plough TSh :2004, TSh :2006, TSh :2007 Mounted two-level plough ПЧ TSh :2004 Stubble breaker ЧК-4М TSh :2004 Cultivator-plantfeeder, universal four-lane КУ 4 ВМ TSh :2004 Semi-mounted mower, double beam КДП-4,0 TSh :2005 Mounted mower КОС-2,1 и 1,5 TSh :2005 Self-dump rake ГП-6,0 TSh :2005 АООТ «Uskunakuruvchi» 1, Urtaaul street, Zangiata district, Tashkent region, Republic of Uzbekistan Tel.: (99870) Ploughs and their components TSh :2007

19 PE «Navoi Engineering Plant» 2, Navoi city, Navoi region, Republic of Uzbekistan Tel.: (99879) Fax: (99879) Screw-cutting lathe. Model 1М63НФ1 and its modifications ТУ Screw-cutting lathe. Model 16К40, 16К40П, 16К40Ф101, 16К40ПФ101 and their modifications ТУ (Россия) Special desk drilling machine. Model 21Н16 and its modifications TSh :2007 Vertical boring-mill machine. Model НФ630 and its modifications TSh :2003 Double-sided snagging grinding machine. Model 3Н340 TSh :2002 Covered, metallic electrodes for hand arc welding and pad welding ГОСТ Электроды сварочные нержавеющие ГОСТ Filters of Akvatex Filters of Kinetico Filter loads Softeners of Kinetico Loads for softeners Fuel, oil, air and cabin filters Company AKVATEX Co., Ltd 125, Gavhar street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) FE «SDK Group And» Purpose Decontaminators of Trojan UVMax Water heaters Swimming pool filters Swimming pool accessories Fountains 63, Erkent street, Shakhrikhan city, Andijan region, Republic of Uzbekistan Tel.: (99871) Fax: (99871) LLC «USTA-AVIA» Airport, Raykhon street, Sergeli district, Republic of Uzbekistan For different types of vehicles and agricultural machines Tel.: (99871) Fax: (99871) Gaseous noise unit АШГ-1 TSh :2006 SPE LLC «ANIKS» 50, Lutfiy street, Yakkasaray district, Tashkent city, Republic of Uzbekistan Tel.: (99871) , (99890) Polymer bottle blowing machine TSh :2007 LLC «ABT RESURS SERVIS» 84, Yalangach ave., Tashkent city, Republic of Uzbekistan Tel.: (99871) , Fax: (99871) , Mechanical water cleaning filter TSh :2008 Sorption water cleaning filter TSh :2008 Ion-exchange water cleaning filter TSh :2008 Water decontaminators TSh :2008 Mechanical water cleaning filter WP TSh :

20 LLC «Chirchik Kommunal Servis» 1, Kh. Maksudoova street, chirchik city, Tashkent region, Republic of Uzbekistan Tel.: (99870) , Fax: (99870) Pic. 1 Pic. 2 Pic. 3 Pic. 4 Appearance Heating boilers from 15 kw up to kw Modular heating unit from 100 kw up to kw Modern hothouse complexes Equipment for oil and gas, and chemical industries Mine drilling tools Die nipple Д-50 ГОСТ Chisel bit К105 TSh :1998 Bit КДГ-40 TSh :2008 Bit КТ-76Т TSh :2008 Bit КТ-93 Т TSh :2008 КТ-132Т TSh :2004 Plugged bit III 93 КЦВ TSh :2003 Plugged bit III 76 КЦВ TSh :2003 Plugged bit ДШВГ Elevator ЭН-12,5 TSh :2008 Capblock М50/12,5 TSh :2008 БРС-50 БРС-100 Pipe grip КШ-50 TSh :2008 Bell jar А76 ГОСТ Amortizator-rotary swivel TSh :2006 Lock ЗН-50 TSh :2003 Lock ЗН-63,5 TSh :2003 Safety clutch МТБ-50 ГОСТ Adapting pipe П-50/73 ТУ Adapting pipe П-50/108 ТУ Nipple Д 127 ГОСТ Other equipment JSC «GEOBURTEXNIKA» Boilers operate on natural gas, liquid fuel, solid fuel, electricity, equiped with injection and blowing torches Operates on all types of fuel, equipped with pumps, automatics, management control devices, pipelines, etc. Metal frame, film coating, automated system of drip irrigation, heating system, boiler equipment, shadowing, infeed СО, spray irrigation, fogging, automated ventilation Different tanks, filters, separators, heat exchangers, sediment boxes, sound attenuators, etc. 104, Usta Shirin street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Fan ВО TSh :2004 Fan ВЦ-4-75 ТУ Уз Pic. 1 Pic. 2 Pic. 3 Pic. 4 PE «Sultanov G.N.» 27a, Djun-arik street, Sergeli district, Tashkent city, Republic of Uzbekistan Tel.: (99870) Polymersand tiling production equipment TSh :2006

21 РЕКЛАМА

22

23 SE «Navoi Mining Metallurgical Plant» 27, Navoi street, Navoi city, Navoi region, Republic of Uzbekistan Tel.: (99879) , Fax: (99879) , Pic. 1 Pic. 2 Pic. 3 Pic. 4 Pic. 5 Pic. 6 Pic. 7 Pic. 8 Pic. 9 Pic. 10 HS code Appearance Turning lathe НТ-250М Тsh : Pic. 1 Boring mill НФ-630 Тsh : Pic. 2 Drilling mill 21Н16 Тsh : Pic. 3 Rough-grinding machine 3Н340 Тsh : Pic. 4 Turning lathe 1М63Н (16К40) ТУ Pic. 5 Wood processing machine СДУ Pic. 6 Pump НС 5Гр-8м Pic. 7 Pump 8Гр-8Т Pic. 8 Two-level mounted plough ПНЯ Pic. 9 Optional equipment , , Pic. 10 LLC «KOMPRESSOR AZIA» 116, Usta Shirin street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Screw compressor units TSh :2007 Compressors ВР-8/2,5 TSh :2007 Compressor station ПР-8/0,7 TSh :2007 PMNU «VEN-KON» Irvadan settlement, Namangan district, Namangan region, Republic of Uzbekistan Tel.: (99869) Fax: (99869) HS code Round, rectangular air conduits and trimmers ТSh : Air cleaning filters ТSh : JSC «Temirchi» 49, Djarkurganskaya street, Khamza district, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Fax: (99871) Spare parts for technological eqiupment, roofing 61

24 JSC «Uzpakhtamash» 92, Tyulpanovskiy pass, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Fax: (99871) , HS code Cotton cleaning equipment ТУ, Tst Grain crusher ТУ,Tst Fan ВЦ-10 ТУ,Tst SC «Pakhtamash-remont-servis» 92, Tyulpanovskiy pass, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Fax: (99871) , Capital and mid-life repair of metalcutters of different types and their components Compressor, reducer and other units repair Spare parts for metalcutters, compressors and reducers Axis up to 4 meters and up to 500 mm diameter ion and testing of steel lifting beckets of different types and dimensions SC «Pakhtamash-instrument» Tyulpanovskiy pass, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Fax: (99871) , ion Fur processor and accessories Wheels, axis and bosses Instruments and accessories Roofing production equipment Calibration rollers Mark punches Caps and flanges Harrows Plates and clippers SC «Pakhtamash-detal» 92, Tyulpanovskiy pass, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Fax: (99871) , ion Reducers ХПП Reducers ПЧ-100 Reducers ХПП Variators ИВР-1 SC «Pakhtamash-quyma» 92, Tyulpanovskiy pass, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Fax: (99871) , Foundry of high-precision parts from cast iron and aluminium. PE «Havo tozalagich» 1o, Proyektnaya street, Kokand city, Ferghana region, Republic of Uzbekistan Tel.: (99873) Filter elements KSt :2007

25 SE «Geology of uranium and rare-earth metals» 7a, Navoi street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Blade chipper ДЗЛ-118 Roller saddles d-60mm Blade chipper ДЗЛ-132 Valve saddles НБ-32 Blade chipper ДЗЛ-151 Valves НБ-32 Blade chipper ДЗЛ-220 Wash tube ВС-12.5 Solid bit.сп. М2-93 Triangle driving stem Solid bit.сп. М2-112 Driving stem primer Solid bit.сп. М2-132 Stem threading d-50mm Locks 3Н-50 (right) Adapting tubes П 50/50 Boring pipe socket 50mm ПМЗ -50/3-50 п.7 Die nipple of 50mm diameter (right) ППТ -60,3/3-50 п.11 Die nipple of 50mm diameter (left) ПМЗ -63,5/3-121 п.17 Three-way cock ПП -3-50/3-63,5 п.23 Pump liner 11ГР НТ-50/Т-50 п.30 Pump rod НБ-32 Projectile manufacturing КВС Primer claw БИ-174 Column pipe cutting - 89mm Adapting pipes 50/89, 50/108 Locks ЗН-63,5, ЗН-42, ЗН-95 Interlock -50 (left) Boring heads КТ-76Т, КТ-112Т, КТ-93Т LLC «MET PROV STRОY» 151A, Gavkhar street, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Mobile housing units (caravan trailers) TSh :2010 PE «Samarkand Likoservis» 180, Pendjikentskaya street, Samarkand city, Samarkand region, Republic of Uzbekistan Tel.: (99866) Fax: (99866) Glass fiber blade TSh :2010 LLC «GULISTON STANDART STORY» 12, Chorbakirskaya street, Bukhara city, Bukhara region, Republic of Uzbekistan Tel.: (99865) Fax: (99865) Injection and diffusion gas torches TSh :2011 PE «Dallakyan Seyran Mikhaylovich» 18, 2nd blind alley, Buz Bozor street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Gaskets for ginning machines TSh :2011 SE «ENERGOQURILISHINDUSTRIA» b/n, Iskander settlement, Bostanlik district, Tashkent region, Republic of Uzbekistan Tel.: (99870) , High voltage electrical tower bodies, conical, reinforced concrete, centrifugical, strained KSt :

26 JSC «Tekhnolog» 52, Asaka street, Mirzo-Ulugbek district, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Coumpound pipe КХУ-27 Tsh :2010 Cone KmХ-032 Tsh :2010 Seed bunker, capacity 42, 90 l Tsh :2010 Tank body Tsh :2010 Automated production line of braces patterning cotton fiber Модификация Different technological equipment for marble processing Мод. КРС-001, ОСА-002, РШ-00 ion of cotton harvesting machine Spare parts for farming machines Wood processing equipment Installation of unbalanced-throw screeen ГИЛ-42 SE «Tekhnolog-Zenker» 52, Asaka street, Mirzo Ulugbek district, Tashkent city, Republic of Uzbekistan Tel.: (99871) HS code Drill rod СБУ Bore bit КНШ System elements with crossroad partitions SE «Tekhnolog-Metaliz» 52, Asaka street, Mirzo Ulugbek district, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) HS code Cesspool emptier V-4,12 cub.m. Tsh : Potable water transportation cistern V-4,12 cub.m, 7,9 cub.m Tsh : Equipment for water distribution vehicle Tsh : Plough-brush, washing-distibution equipment for КДМ Tsh : Automatic-semipress for exhaust net Tsh : Dump truck equipment, based on MAN SE «Technolog-Stan» 210, S, Mashkhodiy street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Automated buckle production line for cotton bailing Modification Different technological equipment for marble processing Мод. КРС-001, ОСА-002, РШ-00 ion of cotton harvesting machines Spare parts for agro farming machines Wood processing equipment Installation of unbalanced-throw screen ГИЛ-42 SE «Technolog-Techplast» 284, Karasarayskaya street, Almazar district, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Telescopic fetilizer pipeline КХУ-27 Tsh :2010 Cup KmХ-032 Tsh :2010 Seed bunker, of 42, 90 l capacity Tsh :2010 Body of the tank Tsh :2010

27 SE «Tekhnologmash» 284, Karasarayskaya street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) HS code Body of distribution reduction gear ХМ Grinding bodies for cement production SE «Sakhovat» 20, Nayman street, Andijan city, andijan region, Republic of Uzbekistan Tel.: (99871) HS code ТормоBrake pads ЛБУ-1200, А-50М, УПА-60/80, АК-60 ТУ Clutch friction facing ТУ Stuffing glands 1,0-150х 180-1, 1,2-160х 190 ГОСТ Centrifugical pump rubber piston НЦ-320 LLC «GAUCH» 52, Asaka street, Mirzo Ulugbek district. Tashkent city , Republic of Uzbekistan Tel.: 8 (371) , Fax: 8 (371) , Cylindric, conical hydraulic cyclone lining ГЦ-380 ПО НМЗ Tsh :2008 Hydraulic cyclone inset (sand attachment) ГЦ 380 ПО НМЗ Tsh :2008 Sand, upper discharge, input nipples, conical part insets, hydraulic cyclones branches Tsh :2008 Scalp crashers panels of different cell sizes Tsh :2008 Pump intake and drive lining "WARMAN FFY-10/8 АН" Tsh :2008 Cups, beckets, barrels, brasses, membranes ГОСТ , , Hydraulic cyclone feeding nipple Tsh :2008 Cuffs for self-dumping wagons 689х653х20; ВС-65 Tsh :2008 Different size cuffs (310х354; 650х720; 420х480; 240х290; 190х230; 355х420; cup shape) Tsh :2008 Feltings for flaking Picа Tsh :2008 Basic and additional shafts and couch Tsh :2008 Rollers for typographic works Tsh :2008 Abrasive instrument (crushers, segments) ТУ Уз Gas-static and hydro-static pressing shell Tsh :2008 Polyurethane collars of flow section size ДУ 50 till ДУ 1400 Tsh :2008 Ring gaskets of hydraulic systems of heavy load open-mine machinery Tsh :2008 Branch for caoline and phosphorite ores enrichment hydraulic cyclone units Tsh :2008 Sand attachment Tsh :2008 Scrabs for cleaning stuck ore from conveyor belts Tsh :2008 Cups for oil-gas pipeline cleaning pistons Tsh :2008 Elastic clutches for driving devices (electric motor-reducer) Tsh :2008 Polyurethane cover pump linings, impellers Tsh :2008 LLC «DYUREM-FAB» 4, A. akhmatova street, Sergeli district, Tashkent city, Republic of Uzbekistan, Tel.: (99871) Fax: 8 (371) Powder poratble fire extinguishers ОП-(Х)-АВСЕ- Х TSh :2006 JSC «Uzbek horticulture-grape machine plant» Gulistan local community, Tashkent region, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Universal, wide-cut, garden ripper КСЛ-5А TSh :

28 LLC «Commercial World» 6, «Business Incubator» Mukimi street, Mubarek city, Kashkadarya region, Republic of Uzbekistan Tel.: (99875) , Fax: (99875) Engineering machines Types of machines Repairing deadlines, approximate, in months Capital repair Turning lathe 1М95; 1616; 1Е61; 1Е95 and of similar type 1 1К62; 1К625;1К62Д;16К20; 16К25 and of similar type 1 1М63; 163 and of similar type 2 1А64; 1М64; 16К40; 1М65; 165; 1Д65 and of similar type 2,5 Pipe-threading machine 9М14; 1Н983, and of similar type 3 Mid-term repair Merry-go-round machine 1510; 1512; 1525; 1531 and of similar type 3 Boring machine 2А420; 2Б697; 2А613; 2А614 and of similar type 2 Drilling machine 2Н125; 2А125; 2С132; 2Н135 and of similar type 0,5 2А554; 2М55; 2М75 and of similar type 1 Grinding machine 3701; 3Г71; 3Г71М; 3Б724 and of similar type 2 Miller 6Р82; 6Р83; 6М80; 6М83Г and of similar type 1 6Н10; 6Р12; 6М13Л; 6550 and of similar type 2 6А73П; 675М; ФУС 32 and of similar type 2 JVC «DEKLA» 5, Sugali ots, street, Chilanzar fistrict, Tashkent city, Republic of Uzbekistan Tel.: (99871) Powder fire extinguisher, injected TSh :2002 ООО «ЕТЕК» 7/23, TTZ-4, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: 8 (371) Axial-blow blower В06-300(ВО );В ;ВМП;ВС;СВМ TSh :2000 Centrifugal fan ВЦ4-75(ВР86-77); ВЦ4-46(ВР300-45); ВР6(ВЦ5; ВЦ9; ВЦП); ВР132-30(ВДН); ВКРМ TSh :2006 SPE «INSTAL» 12, Dj. Ostanova street, Bektemir district, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: 8 (371) Gas-pipe, steam boilers КПа from 0,1 up to 10 t/h capacity TSh :2005 LLC «VISTA RIM» 86, B. Mirabadskaya street, Yakkasaray district, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Mechanical auxanometer According to ГОСТ and ТУ LLC «ELDAS» 7, Khalklar Dustligi street, Shayhontohur district, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Control shutoff sealing device ELDA-1 TSh :

29 UE «TPNSU» 314, Uygur street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Surface heating piping elements for steam boilers, water boilers, and exhaust-heat boilers TSh :2001 Gase-air heater kg-11,63 Гн/М; Kg-11,63 Gc/M; (KgМ-10) TSh :2005 Gas-mazut heat generator ТГ-11,63 Гс/М TSh :2007 Medium pressure, exploision-proof radial fans TSh :2002 High pressure, centrifugical fans TSh :2006 Chemical electric pump units, type Х TSh :2004 Chemical electric pump units, type К TSh :1995 Faecal electric pump units, type НФГ TSh :2005 Semisubmersible electric pump units, type НПП TSh :2005* Electric pump unit, type Д TSh :2005 Electric pump unit, type НЦСГА TSh :2001 Multi-stage gaseous turbo-compressors TSh :1996 Single-stage air turbo-compressors TSh :1997 Single-stage gaseous turbo-compressors TSh :1998 Gaseous turbo-compressors TSh :2002* Liquid-packed ring, vacuum pumps TSh :1996 Mini-cooling stack LLC «Energomash» 3a, Kh. Maksudova street, chirchik city, Tashkent region, Republic of Uzbekistan Tel.: (99870) Fax: (99870) Console pumps, type «К» TSh :2004 Chemical pumps, type «Х», «АХ» TSh :2004 Sanitary pumps, type «СМ» TSh :2004 Stage chamber pump, type «ЦНС», «ЦНСг» TSh :2004 Chemical, semisubmersible pumps, type «АХП», «ХП», «ТХИ» TSh :2004 Rotodynamic pumps, type «Д» TSh :2004 Spare parts for pumps, type «Х», «АХП», «ЦНС», «ЦНСг» LLC «Agromashtamir IIB» 1, Urtaaul street, Zangi-ota district, Tashkent region, Republic of Uzbekistan Tel.: (99870) Rubber, high pressure branch hose with metallic braid TSh :2005 Запасные части к зерновым и хлопковым сеялкам TSh :2005 LLC «Shovot Podshipniki» 5, Zavodskaya street, Shavat district, Khorezm region, Republic of Uzbekistan Tel.: (99862) Fax: (99862) Bearings ГОСТ LLC «Agromakhsustuzatishsozlash» 61, Tashauzskaya street, Urgench city, Khorezm region, Republic of Uzbekistan Tel.: (99862) Fax: (99862) Spare parts for agricultural machinery (combines, tractors) 67

30 SPA «ELXOLDING» 36, Gagarin street, Samarkand city, Samarkand region, Republic of Uzbekistan Tel.: (99866) , Fax: (99866) Drying cabinet for fruits, vegetables and root crops Fans for poultry factories Incubator ЭЛ/И 126 Calorifer-oven (furnice)кн-50/400 Nominal power of alternate current 50 Hz V± 10%; Power consumed from the grid not more than - 23 kw; Maximum temperature in drying chambers 90 C; Number of pallets in each chamber - 15 Dimensions, mm - 500х530х580; Number of eggs on one pallet - 42; Number of pallets - 3; holding capacity, eggs - 126; Voltage V; Type of furnivce - КН-50/КН-250; Heated volume( cub.m.) 50/400; Heat power (EF/H) /12000; Combustion volume (m.cub.) - 0,06/0,285; Weight (kg) - 39/69; Dimensions ( l.w.h.) - 500х370х400/700х480х600 LLC «Margilon tamirlash mekhanika» 2, G. Kurbonov street, Gishtmon settlement, Kushtepa district, Ferghana region, Republic of Uzbekistan Tel.: (99873) Tabs КО and КРХ 90 Tip НКУ-547 Plough share Pump ККО-503 LLC «APEKS-LITERA» 1, Niyazbek yoli street, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Fax: (99871) Waste water bio-treatment units TSh :2010 JSC «Agrotekhtamirlash» 4A, Abay street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Spike-tooth harrow, repaired TSh :2010 LLC «AUTOPROM TECHNOLOGY» Airport, Raykhon street, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Pallet carts TSh :2010 LLC «GLOBAL TRADE» 2, A. Khodjaeva street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Grinding cylinders and facing ceramic riverting TSh :2011 PE «BUZURGMEXR SAVDOGAR» 1, Shimoliy street, 1st small pass, Namangan city, Namangan region, Republic of Uzbekistan Tel.: (99869) Heater for premises TSh :2011

31 LLC «AVS AGRO VATANPARVAR» 1a, Arsanay street, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Food dispensing equipment "PIONER" TSh :2011 LLC «KATYANOV DMITRIY» 176, Akhsikat street, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Net production machine «РАБИЦА» TSh :2011 PE «Elektr Mexanik Ta`mir Ishlab Chiqarish» Ishobod local community, Namangan district, Namangan region, Republic of Uzbekistan Tel.: (99869) Concole pumps, type «К» and «Km» TSh :2011 Bitumen pumps «ДС-125» TSh :2011 LLC «MAXSUS METAL SANOAT» Severnaya industrial zone, Namangan city, Namangan region, Republic of Uzbekistan Tel.: (99869) High pressure tanks for compressed national gas to be installed on vehicles TSh :2011 LLC «EKORAVNAQ» 270, Karasaray street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Biogas units БГУ TSh :2011 LLC «Samarkand Boring Instrument» 7, Universitetskiy blv., Samarkand city, Samarkand region, Republic of Uzbekistan Tel.: (99866) , Exploration drilling boring heads, type 01А3, 01А4.02И3,02И4, 03Р3.03Р4.05И3 TSh :2011 LLC «Kattakurgan pakhtamash» 183, Navoi street, Kattakurgan city, Samarkand region, Republic of Uzbekistan Tel.: (99866) Spike-tooth harrow БЗ-1 TSh :2011 LLC «IRMASH-PLYUS» 4, Industrialnaya street, Andijan city, Andijan region, Republic of Uzbekistan Tel.: (99874) , Ditcher МК-16 TSh :

32 PE «HАМ-ТЕРМ» 3, 8th of March street, Namangan city, Namangan region, Republic of Uzbekistan Tel.: (99869) , Industrial electroheating equipment LLC «Traktor Tamirlash Korkhonasi» 174, N. Kholmatova street, Margilan city, Ferghana region, Republic of Uzbekistan Tel.: (99873) , Spare parts for agricultural machinery for plant growing and maintenance needs PF «FERUM» 290, Mustakillik street, Ferghana city, Ferghana region, Republic of Uzbekistan Tel.: (99873) Gas distribution points, household and industrial PE «SAFFAI» 273, Parpashabof street, Kokand city, Ferghana region, Republic of Uzbekistan Tel.: (99873) Technological textile equipment and its spare parts JVC LLC «KOKAND HARKOV NASOS» 1, Kogozgarlik street, Kokand city, Ferghana region, Republic of Uzbekistan Tel.: (99873) , Centrifugical pumps, steam and driving-piston Centrifugical pumps Centrifugical pumps LLC «Savdotexnikamontaj» 40, E. Marakhimova street, Tashkent city, Republic of Uzbekistan Tel.: (99871) Centrifugical feed pumps Spare parts for pumps maintenance needs Spare parts for centrifugical down pumps to produce oil Ventilator, film cooling tower, type ГПВ TSh :2005 LLC «XOSIYATLIK» 49, Lutfiy street, Tashkent city, Republic of Uzbekistan Tel.: (99871) , Centrifugical fire pump ПН-40 TSh :2010 LLC «METALGAZ» 32, Chilanzar-12, Tashkent city, Republic of Uzbekistan Tel.: (99871) Fax: (99871) Gas filters TSh :2010

Manual piston sampler...m 11

Manual piston sampler...m 11 SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr

More information

Rail 001 112 2 Canvas, folding top 001 101 3 Rear panel 001 102 4 Stip in window, left 001 106 dto. right 001 107

Rail 001 112 2 Canvas, folding top 001 101 3 Rear panel 001 102 4 Stip in window, left 001 106 dto. right 001 107 U 411 1 Rear view mirror, round, metall 13cm Ø 002 045 2 Raised airintake 002 060 3 Side panelling, front, left 002 030 Side panelling, front, right 002 031 4 Panelling left 002 051 dto. right 002 052

More information

Highly flexible couplings

Highly flexible couplings Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations

More information

2010 APPLICATION REFERENCE GUIDE

2010 APPLICATION REFERENCE GUIDE 2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE

More information

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no. 5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model

More information

Heavy Duty Equipment Mechanic (Class Code 3743) Task List. Inspection and Diagnosis

Heavy Duty Equipment Mechanic (Class Code 3743) Task List. Inspection and Diagnosis Heavy Duty Equipment Mechanic (Class Code 3743) Task List Inspection and Diagnosis In order to verify complaints and determine malfunctions a Heavy Duty Mechanic: 1. Reads operators written trouble reports,

More information

MAN - MERCEDES - BENZ

MAN - MERCEDES - BENZ SAYFA: 1 10100 10102 10103 355 353 06 15 355 353 03 15 346 353 08 15 AXLE GEAR AXLE GEAR AXLE (WITH BUSHING TYPE) (WITH BUSHING TYPE) (WITH BUSHING TYPE) 2521 2517-2521-2622 10104 10105 10106 308 350 00

More information

AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District

AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District Repairs and overhauls automobiles, buses, trucks, and other automotive vehicles: Examines vehicle and discusses with customer or

More information

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com. IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation

More information

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical

More information

REMOVAL AND INSTALLATION

REMOVAL AND INSTALLATION 303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214

More information

ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION

ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION SC ELECTROPUTERE SA SC ELECTROPUTERE SA 1. Vision, Mission, Values SC ELECTROPUTERE SA 2. LOCATION Craiova: Located in the South West of the country,

More information

1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55

1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951

More information

Unit A: General Agricultural Machinery. Lesson 1: Machinery and Equipment

Unit A: General Agricultural Machinery. Lesson 1: Machinery and Equipment Unit A: General Agricultural Machinery Lesson 1: Machinery and Equipment Student Learning Objectives: Instruction in this lesson should result in students achieving the following objectives: 1. Explain

More information

DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)

DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH) Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt

More information

Kobelco Extended Warranty Program. www.kobelco-europe.com

Kobelco Extended Warranty Program. www.kobelco-europe.com Kobelco Extended Warranty Program www.kobelco-europe.com Kobelco Extended Warranty is a convenient, value added way to give your Kobelco customers added security and peace of mind. Benefits of the Kobelco

More information

4" SUBMERSIBLE PUMPS

4 SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 50/60 HZ Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant

More information

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS 18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre

More information

DISC HARROWS IN X-ARRANGEMENT FOR TRACTORS FROM 90 TO 300 HP

DISC HARROWS IN X-ARRANGEMENT FOR TRACTORS FROM 90 TO 300 HP SPERBER I ECOTRAK BUSSARD I SEEADLER DISC HARROWS IN X-ARRANGEMENT FOR TRACTORS FROM 90 TO 300 HP SPERBER BUSSARD SEEADLER ECOTRAK DISC HARROWS WITH REAR WHEEL AXLE www.rabe-gb.de STUBBLE CULTIVATION Todays

More information

PLM series Permanent load lifting magnets

PLM series Permanent load lifting magnets Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever

More information

46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis

46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression

More information

FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R

FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP Designated Trade: Level 1 2 3 4 Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK under the appropriate

More information

New Jeep Cherokee Technical specifications

New Jeep Cherokee Technical specifications New Jeep Cherokee Technical specifications Specifications are based on the latest product information available at the time of publication. All dimensions are in millimeters at curb weight and with standard

More information

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496

More information

Fig 1 Power Transmission system of Tractor

Fig 1 Power Transmission system of Tractor POWER TRANSMISSION SYSTEM Transmission is a speed reducing mechanism, equipped with several gears (Fig. 1). It may be called a sequence of gears and shafts, through which the engine power is transmitted

More information

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431

More information

2. Crane standing on firm, horizontal ground.

2. Crane standing on firm, horizontal ground. The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom

More information

18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS

18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS 18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels

More information

Product catalogue, pipe and sewer cleaning systems

Product catalogue, pipe and sewer cleaning systems Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes

More information

JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220

JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated

More information

ENGINE POWERED 5-10t. ~ r"." - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100

ENGINE POWERED 5-10t. ~ r. - )5 F-ii'iii;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 HELl ENGINE POWERED 5-10t I; ~ r"." d- - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 STANDARD SPECIFICATION Manufacturer HUI HELl ca., LTD. Model CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 Load Capacity

More information

MACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)

MACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04) MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer

More information

EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING Revised for ACCESS TO APPRENTICESHIP

EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING Revised for ACCESS TO APPRENTICESHIP EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING for ACCESS TO APPRENTICESHIP SCIENCE SKILLS SIMPLE MACHINES & MECHANICAL ADVANTAGE AN ACADEMIC SKILLS MANUAL for The Construction Trades: Mechanical

More information

Cooking at the Speed of light!

Cooking at the Speed of light! Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide

More information

SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06

SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06 SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz

More information

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity

More information

1300 MAXTRAK SPECIFICATION

1300 MAXTRAK SPECIFICATION CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having

More information

Waste Oil Handling, Spill Containment & Lighting

Waste Oil Handling, Spill Containment & Lighting 58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile Waste Oil Drainer & Extractor Drains and/or extracts waste oil from cars and light commercial vehicles Drain bowl capacity of 20

More information

What can I do with a major in Diesel Technology?

What can I do with a major in Diesel Technology? Lewis-Clark State College offers one and two year certificates, A.A.S. and B.A.S Degrees in Diesel Technology through the Technical and Industrial Division. You can learn more about the Technical and Industrial

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

VERTICAL TURBINE AND PROPELLER PUMPS

VERTICAL TURBINE AND PROPELLER PUMPS VERTICAL TURBINE AND PROPELLER PUMPS INTRODUCTION Vertical Turbine and Propeller Pumps Model 7000 Series Turbine Pump Model 800 Series Axial Flow Propeller Pump Model 800 Series Mixed Flow Propeller Pump

More information

Unit 24: Applications of Pneumatics and Hydraulics

Unit 24: Applications of Pneumatics and Hydraulics Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive

More information

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation

More information

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK

More information

CLASSIFICATION SYSTEM BY FIELD AND SUB-FIELD OF EXPERTISE SUPPLIERS REGISTRY OF GOODS AND SERVICES ENAP GROUP OF COMPANIES I. Suppliers are classified in three groups: Classification Equipments, materials

More information

Unit 24: Applications of Pneumatics and Hydraulics

Unit 24: Applications of Pneumatics and Hydraulics Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 3 HYDRAULIC AND PNEUMATIC MOTORS The material needed for outcome 2 is very extensive

More information

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK

More information

GRU Purchasing Material Group Codes

GRU Purchasing Material Group Codes Title Code Trees and shrubs 10161500 Floral plants 10161600 Non flowering plants 10161800 Fertilizers and plant nutrients and herbicides 10170000 Pest control products 10190000 Minerals and ores and metals

More information

STEERING SYSTEM - POWER

STEERING SYSTEM - POWER STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and

More information

SAMPLE TEST QUESTIONS STEAMFITTER/PIPEFITTER - ITA WEBSITE

SAMPLE TEST QUESTIONS STEAMFITTER/PIPEFITTER - ITA WEBSITE 1 Which tool is used to correct internal hi-low when preparing a 4-in. steel pipe for welding? A. 4-in. grinder with cutting disc. B. Mini-grinder with flapper disc. C. Pencil grinder with cone stone.

More information

Front axle components, overview

Front axle components, overview just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,

More information

EQUIPMENT LIST. Your. www.1rentaldepot.com Hours Monday Friday 7:00 a.m. 5:00 p.m. Saturday 8:00 a.m. 12:00 noon. Partner in the Planning

EQUIPMENT LIST. Your. www.1rentaldepot.com Hours Monday Friday 7:00 a.m. 5:00 p.m. Saturday 8:00 a.m. 12:00 noon. Partner in the Planning www.1rentaldepot.com Hours Monday Friday 7:00 a.m. 5:00 p.m. Saturday 8:00 a.m. 12:00 noon Saint Petersburg 4895 34 th Street North (727) 528-1588 EQUIPMENT LIST Your Partner in the Planning for all Your

More information

GEET Fuel Processor Plans

GEET Fuel Processor Plans GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very

More information

FOREWORD. Right and left as used throughout this manual are determined by facing the direction the machine will travel when in use.

FOREWORD. Right and left as used throughout this manual are determined by facing the direction the machine will travel when in use. FOREWORD The purpose of this manual is to assist you in operating and maintaining your Flail mower. Read it carefully before operating and maintaining the Flail mower, it furnishes the specifications,

More information

ELECTRIC PERISTALTIC MORTAR POINTING PUMP

ELECTRIC PERISTALTIC MORTAR POINTING PUMP ELECTRIC PERISTALTIC MORTAR POINTING PUMP pointing gun & control valve ACF405 PERISTALTIC PuMP hopper feed roller & tube pump for refurbishment & repair trades heritage & conservation bridge & underground

More information

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single

More information

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product

More information

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @

More information

PART 2 FORKLIFT HYDRAULIC SYSTEM

PART 2 FORKLIFT HYDRAULIC SYSTEM PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity

More information

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47) 47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997 Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47

More information

CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100

CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100 CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL

More information

SPACIOUS CABIN TEMPERATURE TELESCOPIC

SPACIOUS CABIN TEMPERATURE TELESCOPIC THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce

More information

Current state of plant Functioning as a peak and emergency centre. Statistics Accumulated operating hours:

Current state of plant Functioning as a peak and emergency centre. Statistics Accumulated operating hours: Current state of plant Functioning as a peak and emergency centre Statistics Accumulated operating hours: D1-2-3-6-7: 43000 to 48000 hrs D4-5: 53000 to 57000 hrs D8: 33000 hrs Layout of the plant Index:

More information

Operating Instructions Drill rig DRU160

Operating Instructions Drill rig DRU160 Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested

More information

BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)

BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056

More information

HYDRAULIC EXCAVATOR. ZAXIS-2 series

HYDRAULIC EXCAVATOR. ZAXIS-2 series ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable

More information

6-years/75,000 miles Comprehensive coverage Subsequent Owner Warranty $100 Deductible

6-years/75,000 miles Comprehensive coverage Subsequent Owner Warranty $100 Deductible LINCOLN PREMIER LIMITED WARRANTY 6-years/75,000 miles Comprehensive coverage Subsequent Owner Warranty $100 Deductible Comprehensive Coverage Because Lincoln has always been a brand you can trust and respect,

More information

FEMA's SCHEDULE OF EQUIPMENT RATES

FEMA's SCHEDULE OF EQUIPMENT RATES DEPARTMENT OF HOMELAND SECURITY FEDERAL EMERGENCY MANAGEMENT AGENCY RECOVERY DIRECTORATE PUBLIC ASSISTANCE DIVISION WASHINGTON, D.C. 20472 The rates on this Schedule of Rates are for applicant-owned equipment

More information

Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages

Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages 2448LSG_P1 R4/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.

More information

1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2

1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2 TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION

More information

367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.

367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube. PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection

More information

MERCEDES FIRST EDITION - 2013

MERCEDES FIRST EDITION - 2013 FIRST EDITION - 2013 CONTENTS Accessories... 1 Hydraulic Jacks Air Intake... 2 Air Filter Charger Charging System Intake Charger Hose Intake Manifold Intake Pipe Air Filter Intercooler Charger Aircondition...

More information

MOTOR VEHICLE MECHANIC REPAIR CATEGORIES

MOTOR VEHICLE MECHANIC REPAIR CATEGORIES Chapter 8: Motor Vehicle Mechanic Repair Categories Page 1 CHAPTER 8 MOTOR VEHICLE MECHANIC REPAIR CATEGORIES Section 8-1 REQUIREMENT Section 10 of the Motor Vehicle Service and Repair Act (MCL 257.1310)

More information

Competition 4 & 6 suspension Lift Toyota Landcruiser & nissan patrol

Competition 4 & 6 suspension Lift Toyota Landcruiser & nissan patrol Competition 4 & 6 suspension Lift Toyota Landcruiser & nissan patrol Competition suspension Product Guidelines Guidelines for sale and recommendation of 4 (100mm) and 6 (150mm) Lifts for Toyota Landcruiser

More information

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br

More information

SJT / SJM / SJP Large Vertical Pumps

SJT / SJM / SJP Large Vertical Pumps SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP

More information

COMMERCIAL GAS DRYER

COMMERCIAL GAS DRYER COMMERCIAL GAS DRYER MODELS CGD8990XW0 4 12 Litho In U.S.A. (CMS) (psw) c 2012 WHIRLPOOL CORPORATION Part No. Rev. B TOP AND CONSOLE PARTS 2 TOP AND CONSOLE PARTS 1 Literature Parts W10184516 Installation

More information

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003

More information

Cooling system components, removing and installing

Cooling system components, removing and installing Engine BHW Cooling system components, removing and installing Page 1 / 24 19-1 Cooling system components, removing and installing Warning! When doing any repair work, especially in the engine compartment,

More information

mounted reversible ploughs ploughs packers

mounted reversible ploughs ploughs packers Ploughs mounted reversible ploughs ploughs packers Albatros SUPER-ALBATROS Kormoran Marabu Untergrundpacker Ploughs for all the requirements and conditions of use www.rabe-gb.de Ploughs INHALTSVERZEICHNIS

More information

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION

More information

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm

More information

REGISTRATION OF INTEREST

REGISTRATION OF INTEREST A B C Adhesives and Sealants Advertising Air Cargo Transport Air Conditioners Air Conditioning Installation or Maintenance or Repair Services Air Filters Ambulance Services Arborist Services Architectural

More information

Slide the new steering column shaft through the steering column from the driver compartment.

Slide the new steering column shaft through the steering column from the driver compartment. Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.

More information

Vibration and Noise Information

Vibration and Noise Information Author TOOJH Rev(1) Product Ergonomics & Industrial Design 9 Jan -14 Page 1(25) Vibration and Noise Information VIBRATION AND NOISE INFORMATION... 1 INTRODUCTION... 2 GENERAL INFORMATION VALID FOR MOST

More information

DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)

DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)

More information

Wynn s Extended Care

Wynn s Extended Care Wynn s Extended Care Every car deserves to receive the very best care... especially yours. How Do You Keep Your Reliable Transportation Reliable? Count on Wynn s Because Wynn s has been caring for cars

More information

UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING

UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING Introduction to Automobile Engineering Structure 1.1 Introduction Objectives 1.2 Definition 1.3 Classification of Vehicles 1.4 Layout of an Automobile Chassis

More information

Engine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator

Engine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator The Strobe light checks the unit for: Balance of operating machinery RPM of motors, engine pulleys, fans, etc. Observe belt slippage Strobe light will stop action at speeds from 200 to 6000 RPM 204-1890

More information

Topics of the Presentation

Topics of the Presentation Drill Rig Safety Topics of the Presentation Personnel safety and monitoring PPE Health (Drugs and Alcohol) Drill Rig operation Safe set up procedures Safe operation of machine Safety related accidents

More information

RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01

RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01 SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER : CONTACT PERSON : DATE : E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK

More information

32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw

32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw ,QGXVWULDO#*HQHUDWRU 32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw Generator set consisting of engine and alternator mounted

More information

Boiler Plan II Table of Contents

Boiler Plan II Table of Contents Cover Page Table Of Contents Introduction Parts List Additional Materials Assembly instructions Drawings 1-15 Boiler Plan II Table of Contents Introduction This will be a very rewarding project, if you

More information

32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw

32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw ,1'8675,$/#*(16(7 6HULHV#'9#448 32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw Generator set consisting of engine and alternator mounted

More information