MEZŐKÖVESDI BÚTORIPARI KFT Founded: 1951

Transcription

1 Contact person: Laszlo Persze Date: Side: 1/17 Dear Sir/Madam! Let me thank you for your kind interest in our products. First of all I would like to share some information about our company: The settlement s joiner masters established the legal predecessor of our company in Hungary (Europe)- Mezőkövesd Joiner Association- in This form was transformed into Ltd. (Private Limited Company) in October, As far as the content of our product structure is concerned, the production of office-, hotel-, library- financial institution- and non-series interior design appointments is determinative. We produce serial and non-serial items as well. The annual budget is app USD. The company s more than half-century-old past and the continuous reformation is the guarantee that in our produced furniture the 60-yearold professional experience is mixed with our ages most modern achievements and life philosophy. We apply raw materials using continuously the results of the recent researches to produce our innovative products. The ergonomic and functional changes are continuous; we always take allowances for the results of the latest researches and the optimisation of the interior trends. According to our view, if the extant traditional professional skill is mixed with the recent manufacturing technology, as a result we get an up-to-date qualitative product with a reliable service background. Consequently, for over 60 years the catchwords of our company have been: Quality, Reliability, and Design. However, technological progress has motivated us to complete the above-mentioned words with a new one: Environment. As a result, beside the quality control system ISO 9001:2000 which provides a perfect guarantee -, our company is operating the ISO14001 environmental control system as well. It is a proper guarantee that the environmental load of our products is low (environmental friendly) and they don t pollute our Earth at a higher level than necessary. International researches proved that during the working hours the achievement could be increased (38 %) by proper choice of office furniture. In addition these people feel themselves more comfortable in their spare time as well and outstanding tiredness can be observed in less cases. So, the aim was to figure out such kind of furniture that are ergonomically perfect, fulfil the requirements of modern design and forms, and are made of environment-friendly materials. Therefore we use materials produced according to the results of the newest researches, work together with enteriour designers and develop new products. Our office furniture products can be divided into three separate parts: Melamine (made of melamine face chipboards) furniture (Collection: Jupiter, Pluto, Talisman Plus, Manager Plus, Venus) Veneer or HPL furniture - high quality, real wood and veneer (Minister, President, Emerald, Quarz, Renaissance, Squart) Painted furniture a unique, hand made work that is produced with real wood

2 Contact person: Laszlo Persze Date: Side: 2/17 The other profile of the company is export trade. We also specialised in shop furniture producing. Owing to our special skilled workers and our continuous and upto-date trend following, we are able to produce any kind of shop furniture according to personal demands. We have the capacity to form extra surfaces, we produce special shaped MDF plates with extra high gloss painting, arched surfaces covered with HPL, any sort of metal accessories, furnishings made of brass, glass-shelves, glass-vitrines. Thanks to all the factors mentioned above we cooperate successfully with the UMDASCH Shopfitting Group for ages. Our planning, producing and transport standards satisfy the demands of the Hungarian and EU standards. We use CAD / CAM systems during the planning process, the preparation and manufacturing. Financially the firm is stable (qualified level A the best), since the establishment there wasn t any debt for creditors. We have won the Hungarian public procurement for many years, which means that we have the right to refurbish every organisation in the state sector in Hungary. Owing to these factors, nearly every leading institutions of Hungary are our customers. We produced office furniture for example for the Parliament, the Hungarian Counter Terrorism Centre and other state institutions, libraries, hotels, banks, educational institutions and post offices. Because of our company s philosophy, and to take the social responsibility one of our most important mission is to teach the next generation and give them a possible future vision! We cooperate with the local school, and we teach almost all of the trainee, so we train our second line. We produced shop furniture for numerous huge chain stores in the field of food, fashion, jewellery and perfumes, but according to our obligation of secrecy we cannot tell the names of these stores. Our customers are returning buyers; they consider us as correct, accurate, reliable partners. They are our references to our reputation! We have never had any lost litigation during the past 62 years. Thank you for your patience to read this introduction. I hope that this letter and the references arouse your interest and in the future we can welcome you as a new partner.

3 Contact person: Laszlo Persze Date: Side: 3/17 For further information please visit our web site: If you have any questions, please contact us with confidence. Kindest regards, Laszlo Persze

4 Contact person: Laszlo Persze Date: Side: 4/17 Plants and workshops: We have 9 workshops separated each other. A. Board working shop B. Stock C. Fitting shop D. Wood shop E. Workshop for finishing F. Packaging G. Maintance depot H. Trainee center I. Office

5 Contact person: Laszlo Persze Date: Side: 5/17 A. Board working shop with centralised air dust collector system. It is a 900 m 2 workshop, where all of the machines for the panel working are. The elements inside the factory can move with the assistance of roller conveyor system. Machines: 1. 1 pc Panel Sizing Centre, Model: Holzma HPL380 Capacity app: 400 m 2 /shift 2. 1 pc Vertical panel saw. Model: Holzher Capacity app: 144 m 2 /shift

6 Contact person: Laszlo Persze Date: Side: 6/ pcs Beam saw. Model: Altendorf F45 Capacity app: 85 m 2 /shift/machine 4. 2 pcs CNC Machining Centres- Routing, Drilling. Modell: Rover A and Rover B Capacity app: m 2 /shift/machine 5. 1 pc CNC Machining Centre- Routing, Drilling and Edgebanding. Modell: Homag BAZ322. Capacity app: m 2 /shift

7 Contact person: Laszlo Persze Date: Side: 7/ pcs linear Edgebandings. Modells: Brandt and IMA Capacity app: 4800 meter/shift/machine 7. 2pcs throughfeed multiple drilling machines. Modells: Biesse Techno7 and Detel D7. Capacity app.: 600 m 2 /shift/machine 8. 4 pcs Spindle moulders. Model: various Capacity app: 1500 meters/shift/machine

8 Contact person: Laszlo Persze Date: Side: 8/17 B. Stock We have 450 m2 stock, where we are able to storage app m 2 basic materials. The basic material is moved by forklift, Model: Linde.

9 Contact person: Laszlo Persze Date: Side: 9/17 C. Fitting shop We have 2pcs of Fitting shop. The first is 1250 m 2, the second 300 m 2. They are fraught with compressed air system, and a different kind of hand tools, for example drilling machines, edge banders, routers, and so on.

10 Contact person: Laszlo Persze Date: Side: 10/17 D. Wood shop with centralised air dust suction system. It is a 540 m 2 workshop, where the basic joiner machines, presses, and the machines for the wood working are. Machines: 1. 2 pcs hot presses. Models: Italpresse XL8 and Tiger Tm pc Bending press.

11 Contact person: Laszlo Persze Date: Side: 11/ pcs Band saw. Models: various pc Auger. Model: Bacci 5. 1 pc Mortiser. Model: Bacci TSG 2T 6. 1 pc Multiple drilling Machine Model: SAG pc drilling machine. Model: Evig pc Wide belt sander. Model: SCM Sandya 10

12 Contact person: Laszlo Persze Date: Side: 12/ pcs Belt sanders. Model: Volpato pc Copying wood turning lathe. Model: Brevettata pc 5 head moulding machine pc Multiple rip saw. Model: Kinematic.

13 Contact person: Laszlo Persze Date: Side: 13/ pc Surface planer. Model: Borsodi pcs Thicknes planer. Model: Borsodi and Technomax S pc Glue spreader. Model: Orma pc hidraulised veneer cutter. Model: Ofod DodaI pc veneer sewing machine. Model: KUPER pc copying router. Model: SAG pc Ingafűrész

14 Contact person: Laszlo Persze Date: Side: 14/17 E. Workshop for finishing This workshop is 160 m 2. There is separated 3 parts: Sanding room- spraying and drying capsule- room for robot and drying. Machines: 1. Spraying robot. Model: Cefla Falcioni Kleenspray

15 Contact person: Laszlo Persze Date: Side: 15/17 2. Spraying and drying capsule F. Packaging We have 200 m 2 packaging room, where we have different type of packaging and transport machines: 1. Cartoon folder machine 2. Banding machine 3. Hand forklift 4. Automatic pallet packaging

16 Contact person: Laszlo Persze Date: Side: 16/17 G. Maintance depot Our maintance depot is 50 m 2, and equipped all of the tools and machines, which need for the basic repair. H. Trainee center The trainee center has 450 m 2, and we teach app.60 students / year. The students get the theoretical instruction in the school, and we show them, how to do it in the real word.

17 Contact person: Laszlo Persze Date: Side: 17/17 I. Office We have 474 m 2 office area, where the offices, showroom and meeting room are.