Signal lamps. General information 3-2

Transcription

1 Signal lamps Page General information - 2 Signal lamps with integrated LED - 5 Signal lamps with integrated LED, 5 mm - 6 Signal lamps with integrated LED, 7.0 mm - 12 Signal lamps with integrated LED, 9.1 mm - 14 Signal lamps with integrated LED, 10 mm - 18 Signal lamps with integrated lamp - 21 Signal lamps with integrated filament lamp, 5 mm - 22 Signal lamps with integrated filament/neon lamp, 7 mm - 24 Signal lamps with integrated filament/neon lamp, 10 mm - 26 Signal lamps with integrated filament/neon lamp, 10 mm - 28 Signal lamps with integrated filament/neon lamp, 14 mm - 2 Signal lamps with lamp socket - 5 Signal lamps with lamp socket W 2 x 4.6d, 9.1 mm - 6 Signal lamps with lamp socket T 4.6, 9.1 mm - 8 Signal lamps with lamp socket T 5.5, 11.1 mm - 40 Signal lamps with lamp socket BA 9s (MBC/MCC), 16.2 mm - 42 Signal lamps with lamp socket E 10 (MES), 16.2 mm - 44 Signal lamps with lamp socket BA 9s (MBC/MCC), 18.2 mm - 48 Signal lamps with lamp socket E 14, 22. mm - 50 Signal lamps with lamp socket E 14, 0.5 mm - 52 Signal lamps with lamp socket BA 15d, 0.5 mm - 56 Panel mounting sockets - 59 Panel mounting sockets W 2 x 4.6d - 60 Panel mounting sockets, tubular lamp holders - 62 Panel mounting sockets BA 15d - 64 Signal lamps - 1

2 Signal lamps General information Signal s with integral lamps/leds The solde lamps/leds without base cannot be replaced. Signal s with lamp socket An integral lamp socket allows replacement of lamps/leds of the appropriate type. Filament operating life Operating life specifications refer to AC voltage operation. If operated with DC voltage, these values are uced by 40%. Standard mounting dimensions We recommend use of mounting hole diameters 16, 22 and 0 mm, as these comply with international standard recommendations and DIN standards. Limit values The voltage specified as the limit value is the standard insulating voltage for the signal lamps. The permitted ambient temperatures are always specified in conjunction with the maximum power of the lamps used, and the signal lamp should be located outside of the space subject to increased temperature. Color and lenses transparent = clear, grooved on inner surface for better light diffusion opaque = translucent but not clear CE-Conformity The CE-Conformity of the products of Chapter Signal s can be divided into the following groups corresponding to the Low-Voltage Directives 72/2/EWG: All products with voltage > 50 V For these components the Low-Voltage Directive 7/2/ EWG aplies. All products with voltage < 50 V No directive applies for these components. EMC-Law The components of this catalogue are within the meaning of the law concerning the electromagnetic conformity (= EMC-Law) basic components as, for ex., switches, signal lamps or like and, therefore, do not fall within the scope of the EMC-Law. Declaration of conformity Declarations of conformity for all concerned products are available and can be delive upon request. Please always state the exact order reference of the desi product. Marking The marking will be corresponding to the Low-Voltage Directive 7/2/EWG resp. the Directive CE-Marking 9/68/EWG either on the packing or on the product itself. - 2 Signal lamps

3 Signal lamps Lens colour suitability for illumination Lens color transparent Filament lamps limited good good Suitable for: Neon lamps good good good Lens colour opaque Filament lamps Suitable for: Neon lamps good limited* limited not suitable blue limited limited* blue limited not suitable *Neon glow lamps are well suitable white limited good good not suitable not suitable not suitable Neon lamps Neon lamps may glow on a short time after having been switched off, for example in combination with long wires. To avoid this, a parallel resistor with 1,2 MΩ 1 / 4 W, can be used. Engraving and Hot Stamping Custom-made legend inserts, photographic film inserts or customer-specific inserts. Standard font DIN 0 640, thin Type size* in mm Line thickness in mm 0,5 type setting A or narrow-spaced semi-bold type E, however, with rounded ends of characters. Lens colour transparent: 4 0,5 and 5 0,6,, blue 6 0,7 opaque: 8 0, ,5 1,2 black and dark grey white,,, blue and light grey Standard colour combinations Legend white white white black black *The selected type size depends on text length and lens size. Signal lamps -

4 Signal lamps with integrated LED General data Signal lamps with integral LED, mounting hole diameter from 5 to 10 mm. The mm specification in the product name indicates the appropriate mounting hole diameter of the signal lamps. Content Signal lamps with integrated LED, 5 mm - 6 Signal lamps with integrated LED, 5 mm, protruding LED - 7 Signal lamps with integrated LED, 5 mm, round protruding lens - 8 Signal lamps with integrated LED, 5 mm, round flush lens - 9 Signal lamps with integrated LED, 5 mm, triangular flush lens - 10 Integr. LED Signal lamps with integrated LED, 7.0 mm - 12 Signal lamps with integrated LED, 7.0 mm, round protruding lens - 1 Signal lamps with integrated LED, 9.1 mm - 14 Signal lamps with integrated LED, 9.1 mm, round lens - 15 Signal lamps with integrated LED, 9.1 mm, round protruding lens - 16 Signal lamps with integrated LED, 10 mm - 18 Signal lamps with integrated LED, 10 mm, protruding LED - 19 Signal lamps with integrated LED, 10 mm, round lens - 20 Signal lamps Stock items are marked - 5

5 Signal lamps with integrated LED Signal lamps with integrated LED, 5 mm Pict.: blue Technical data Integr. LED General information Form of lens Colour of lens Diameter of collar Dimensions Length of collar Overall height Mounting depth Mechanical design Mounting Terminals socket 5 mm pressing into hole solder terminals no Electrical characteristics Operating voltage U B Forward voltage U F at 25 C at 10 ma forward current 2.2 V Reverse voltage U R at 25 C V Forward current, I F at 25 C Reverse current I R at 25 C 100 µa Power dissipation P tot at 25 C max. 120 mw Other specifications Degree of protection from front side Weight IP g Operating voltage U B : DC voltage from 5 to 28 V A suitable series resistor is installed in the unit; versions without series resistor must be fitted with an external one. External resistor: RV = (UB - UF ):IF Recommended ratings of external resistors: - for 5-7 V = 0 Ω 0.25 W - for V = 1.1 kω 0.25 W - for V = 2.4 kω 0.5 W - 6 Stock items are marked Signal lamps

6 Signal lamps with integrated LED Signal lamps with integrated LED, 5 mm, protruding LED Pict.: Integrated currency resistor Operating voltage U B Forward current, Colour of lens I F at 25 C Order no. no according to series max. 20 ma LED transparent /0000 resistor 5-28 V no according to series max. 20 ma LED transparent /0000 resistor 5-28 V no according to series max. 20 ma LED transparent /0000 resistor 5-28 V yes V 8-12 ma LED transparent /0000 yes V 8-12 ma LED transparent /0000 yes V 8-12 ma LED transparent /0000 Technical data see page - 6 Long terminal is anode. Integr. LED Signal lamps Stock items are marked - 7

7 Signal lamps with integrated LED Signal lamps with integrated LED, 5 mm, round protruding lens Pict.: Integrated currency resistor Operating voltage U B Forward current, Colour of lens I F at 25 C Order no. no according to series max. 20 ma LED transparent /101 resistor 5-28 V no according to series max. 20 ma LED transparent /150 resistor 5-28 V no according to series max. 20 ma LED transparent /1402 resistor 5-28 V yes V 8-12 ma LED transparent /101 yes V 8-12 ma LED transparent /150 Integr. LED yes V 8-12 ma LED transparent /1402 yes V 8-12 ma LED super bright transparent /100 yes V 8-12 ma LED super bright transparent /1400 Technical data see page - 6 Long terminal is anode. - 8 Stock items are marked Signal lamps

8 Signal lamps with integrated LED Signal lamps with integrated LED, 5 mm, round flush lens Pict.: Integrated currency resistor Operating voltage U B Forward current, Colour of lens I F at 25 C Order no. no according to series max. 20 ma LED transparent /101 resistor 5-28 V no according to series max. 20 ma LED transparent /150 resistor 5-28 V no according to series max. 20 ma LED transparent /1402 resistor 5-28 V yes V 8-12 ma LED transparent /101 yes V 8-12 ma LED transparent /150 yes V 8-12 ma LED transparent /1402 yes V 8-12 ma LED super bright transparent /100 yes V 8-12 ma LED super bright transparent /1400 Technical data see page - 6 Long terminal is anode. * Without series resistor, mounting depth = 18 mm. Integr. LED Signal lamps Stock items are marked - 9

9 Signal lamps with integrated LED Signal lamps with integrated LED, 5 mm, triangular flush lens Pict.: blue Integrated currency resistor Operating voltage U B Forward current, Colour of lens I F at 25 C Order no. no according to series max. 20 ma LED transparent /101 resistor 5-28 V no according to series max. 20 ma LED transparent /150 resistor 5-28 V no according to series max. 20 ma LED transparent /1402 resistor 5-28 V yes V 8-12 ma LED transparent /101 yes V 8-12 ma LED transparent /150 Integr. LED yes V 8-12 ma LED transparent /1402 yes V 8-12 ma LED super bright transparent /100 yes V 8-12 ma LED super bright transparent /1400 Technical data see page - 6 Long terminal is anode. * Without series resistor, mounting depth = 18 mm Stock items are marked Signal lamps

10 Signal lamps with integrated LED Signal lamps with integrated LED, 7.0 mm Pict.: Technical data Integr. LED General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth Mechanical design Mounting Terminals socket round protruding 8.5 mm 5 mm 27.5 mm 7.0 mm pressing into hole solder terminals no Electrical characteristics Operating voltage U B V Forward voltage U F at 25 C at 20 ma forward current 2.4 V Reverse current I R at 25 C V Forward current, I F max. 20 ma Reverse current I R at 25 C 100 µa Power dissipation P tot at 25 C max. 120 mw Light intensity Other specifications Degree of protection from front side IP40-12 Stock items are marked Signal lamps

11 Signal lamps with integrated LED Signal lamps with integrated LED, 7.0 mm, round protruding lens Pict.: Operating voltage U B Forward current, I F Colour of lens Light intensity Order no V max. 20 ma LED white transparent 400 mcd / V max. 20 ma LED transparent 200 mcd / V max. 20 ma LED transparent 200 mcd / V max. 20 ma LED transparent 1000 mcd / V max. 20 ma LED blue transparent blue 00 mcd /1600 Technical data see page - 12 Integr. LED Signal lamps Stock items are marked - 1

12 Signal lamps with integrated LED Signal lamps with integrated LED, 9.1 mm Pict.: Technical data Integr. LED General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth Mechanical design Mounting Terminals socket round protruding 11 mm 0.5 mm 9.1 mm ring nut solder terminals no Electrical characteristics Operating voltage U B V Forward voltage U F at 25 C at 20 ma forward current 2.4 V Reverse voltage U R at 25 C V Reverse current I R at 25 C 100 µa Power dissipation P tot at 25 C max. 120 mw Light intensity at 20 ma Other specifications Degree of protection from front side Weight IP40 1 g Accessories Signal lamps with integrated LED, 9.1 mm Description Photo Order no. Page Fixing spanner M 9, M / Stock items are marked Signal lamps

13 Signal lamps with integrated LED Signal lamps with integrated LED, 9.1 mm, round lens Pict.: Operating voltage U B Light intensity at 20 ma Colour of lens Order no V 200 mcd LED super bright transparent / V 1000 mcd LED super bright transparent / V 200 mcd LED super bright transparent / V 00 mcd LED super bright blue transparent blue / V 400 mcd LED super bright white transparent / V LED transparent /1509 Technical data see page - 14 Accessories: Fixing spanner M 9, M 10: /0105 With integrated series resistor. Other voltages on request. Integr. LED Signal lamps Stock items are marked - 15

14 Signal lamps with integrated LED Signal lamps with integrated LED, 9.1 mm, round protruding lens Pict.: Operating voltage U B Light intensity at 20 ma Colour of lens Order no V 200 mcd LED super bright transparent / V 1000 mcd LED super bright transparent / V 200 mcd LED super bright transparent / V 00 mcd LED super bright blue transparent blue / V 400 mcd LED super bright white transparent / V LED transparent /150 Technical data see page - 14 With integrated series resistor. Other voltages on request. Integr. LED - 16 Stock items are marked Signal lamps

15 Signal lamps with integrated LED Signal lamps with integrated LED, 10 mm Pict.: Einbauöffung Technical data Integr. LED General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth Mechanical design Mounting Terminals socket 12.5 mm 0.5 mm 10 mm pressing into hole quick connector 2.8 x 0.8 tin-plated no Electrical characteristics Operating voltage U B Forward voltage U F at 25 C at 20 ma forward current 2.4 V Reverse voltage U R at 25 C V Forward current, I F Reverse current I R at 25 C 100 µa Power dissipation P tot at 25 C max. 120 mw Light intensity Protecting diode Other specifications Degree of protection from front side Weight IP g Operating voltage U B : DC voltage from 6-28 V A suitable series resistor is installed in the unit; the version without resistor must be fitted with an external one. A version with an additional protective diode is available to protect the LED against any voltage peaks. External resistor: R V = (U B - U F ) : I F Recommended ratings of external resistors: - for 6-7 V = 0 Ω 0.25 W - for V = 680 Ω 0.5 W - for V = 1500 Ω 1 W - 18 Stock items are marked Signal lamps

16 Signal lamps with integrated LED Signal lamps with integrated LED, 10 mm, protruding LED Pict.: Integrated currency resistor Einbauöffung Protecting diode Operating voltage U B Forward current, I F Light intensity Order no. no yes according to series max. 20 ma LED 1000 mcd /0000 resistor 6-28 V no yes according to series max. 20 ma LED 1000 mcd /0000 resistor 6-28 V no yes according to series max. 20 ma LED 200 mcd /0000 resistor 6-28 V no no according to series max. 20 ma LED 200 mcd /0000 resistor 6-28 V no no according to series max. 20 ma LED 1000 mcd /0000 resistor 6-28 V no no according to series max. 20 ma LED 200 mcd /0000 resistor 6-28 V yes yes V ma LED 200 mcd /0000 yes yes V ma LED 1000 mcd /0000 yes yes V ma LED 200 mcd /0000 yes no V ma LED 200 mcd /0000 Integr. LED yes no V ma LED 1000 mcd /0000 yes no V ma LED 200 mcd /0000 Technical data see page - 18 Signal lamps Stock items are marked - 19

17 Signal lamps with integrated LED Signal lamps with integrated LED, 10 mm, round lens Pict.: Integrated currency resistor Einbauöffung Protecting diode Operating Forward current, I F Light voltage U B intensity Order no. yes yes V ma LED 200 mcd /1000 yes yes V ma LED 200 mcd /100 yes yes V ma LED 1000 mcd /1000 yes yes V ma LED 1000 mcd /1500 yes yes V ma LED 200 mcd /1000 Integr. LED yes yes V ma LED 200 mcd /1400 yes yes V LED blue 00 mcd /1000 yes yes V LED blue 00 mcd /1600 yes yes V LED white 400 mcd /1000 yes no V ma LED 200 mcd /1000 yes no V ma LED 200 mcd /100 yes no V ma LED 1000 mcd /1000 yes no V ma LED 1000 mcd /1500 yes no V ma LED 200 mcd /1000 yes no V ma LED 200 mcd /1400 yes no V LED blue 00 mcd /1000 yes no V LED blue 00 mcd /1600 yes no V LED white 400 mcd /1000 Technical data see page - 18 Other voltages on request Stock items are marked Signal lamps

18 Signal lamps with integrated lamp General data Signal lamps with integral filament lamp, neon lamp or neon glow lamp. For mounting hole diameters from 5 to 14 mm. The mm specification in the product name indicates the appropriate mounting hole diameter of the signal lamps. Content Signal lamps with integrated filament lamp, 5 mm - 22 Signal lamps with integrated filament lamp, 5 mm, round lens - 22 Signal lamps with integrated filament lamp, 5 mm, square lens - 2 Signal lamps with integrated filament lamp, 5 mm, triangular lens - 2 Signal lamps with integrated filament/neon lamp, 7 mm - 24 Signal lamps with integrated filament/neon lamp, 7 mm, solder terminals - 25 Integr. Signal lamps with integrated filament/neon lamp, 10 mm - 26 Signal lamps with integrated filament/neon lamp, 10 mm, round lens - 27 Signal lamps with integrated filament/neon lamp, 10 mm - 28 Signal lamps with integrated filament/neon lamp, 10 mm, round lens - 29 Signal lamps with integrated filament/neon lamp, 10 mm, square lens - 0 Signal lamps with integrated filament/neon lamp, 10 mm, lens in arrow shape - 1 Signal lamps with integrated filament/neon lamp, 14 mm - 2 Signal lamps with integrated filament lamp, 14 mm, round lens, 28 V - 2 Signal lamps with integrated neon lamp, 14 mm, round lens, 20 V - Signal lamps Stock items are marked - 21

19 Signal lamps with integrated lamp Signal lamps with integrated filament lamp, 5 mm Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Length of collar Width of collar Overall height Mounting depth 1 mm 18 mm 5 mm Electrical characteristics Voltage Power Other specifications Operating life Degree of protection from front side Weight 24 V 0.45 W h IP40 0. g Mechanical design Mounting Terminals socket pressing into hole solder terminals no filament lamp Integr. Signal lamps with integrated filament lamp, 5 mm, round lens Pict.: Voltage Power Operating life Colour of lens Order no. 24 V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent blue /1601 Technical data see page Stock items are marked Signal lamps

20 Signal lamps with integrated lamp Signal lamps with integrated filament lamp, 5 mm, square lens Pict.: Voltage Power Operating life Colour of lens Order no. 24 V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent blue /1601 Technical data see page - 22 Signal lamps with integrated filament lamp, 5 mm, triangular lens Integr. Pict.: blue Voltage Power Operating life Colour of lens Order no. 24 V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent / V 0.45 W filament lamp h transparent blue /1601 Technical data see page - 22 Signal lamps Stock items are marked - 2

21 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp, 7 mm Pict.: Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth Mechanical design Mounting Terminals socket round 8.5 mm 5 mm 7 mm pressing into hole no Electrical characteristics Voltage Power Other specifications Operating life Degree of protection from front side Weight Approvals neon lamp versions h IP g VDE T85,SEV T85, FEMKO T85 b. 0.5 ma Integr Stock items are marked Signal lamps

22 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp, 7 mm, solder terminals Pict.: Voltage Power Terminals Operating life Colour of lens Order no. 24 V 0.84 W solder filament lamp h transparent terminals 24 V 0.84 W solder filament lamp h transparent terminals 24 V 0.84 W solder filament lamp h transparent terminals 24 V 0.84 W solder filament lamp h transparent terminals 20 V solder neon lamp transparent terminals 20 V solder neon lamp transparent terminals 20 V solder terminals neon lamp transparent Technical data see page - 24 Other voltages on request / / / / / / /1402 Integr. Signal lamps Stock items are marked - 25

23 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp, 10 mm Pict.: blue Panel cut-out Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Length of collar Width of collar Overall height Mounting depth Mechanical design Mounting Terminals socket 1.2 mm 2 mm 10 mm pressing into hole quick connector 2.8 x 0.8 tin-plated no Electrical characteristics Voltage Power Other specifications Operating life Degree of protection from front side Weight Approvals neon lamp (T= C) h IP g VDE (85) at 1.5 W, VDE (120) at 1.6 ma Integr Stock items are marked Signal lamps

24 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp, 10 mm, round lens Pict.: blue Panel cut-out Voltage Power Operating life Colour of lens Order no. 28 V 1.2 W filament lamp h transparent / V 1.2 W filament lamp h transparent / V 1.2 W filament lamp h transparent / V 1.2 W filament lamp h transparent / V 1.2 W filament lamp h transparent blue / V neon lamp transparent / V neon lamp transparent / V neon lamp transparent /1402 Technical data see page - 26 Integr. Signal lamps Stock items are marked - 27

25 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp, 10 mm Panel cut-out Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Length of collar Width of collar Overall height Mounting depth Mechanical design Mounting Terminals socket mm 0 mm 10 mm pressing into hole no Electrical characteristics Voltage Power Other specifications Operating life Degree of protection from front side IP40 Weight 2.5 g Approvals filament lamp (T = 85 C) SEV Approvals neon lamp (T = 120 C) VDE, SEV Integr Stock items are marked Signal lamps

26 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp, 10 mm, round lens Pict.: Panel cut-out Voltage Power Terminals Operating life Colour of lens Order no. 14 V 1.2 W filament quick connector h opaque /0214 white 14 V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent /1601 blue 28 V 1.2 W filament quick connector h opaque /0214 white 28 V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent /1601 blue 20 V neon lamp quick connector transparent / x 0.8 tin-plated 20 V neon lamp quick connector transparent / x 0.8 tin-plated 20 V neon lamp quick connector transparent / x 0.8 tin-plated 20 V neon lamp quick connector 2.8 x 0.8 tin-plated transparent /1502 Integr. Technical data see page - 28 Other voltages and versions with connection cable on request. Signal lamps Stock items are marked - 29

27 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp, 10 mm, square lens Pict.: Panel cut-out Voltage Power Terminals Operating life Colour of lens Order no. Integr. 14 V 1.2 W filament quick connector h opaque /0214 white 14 V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent /1601 blue 28 V 1.2 W filament quick connector h opaque /0214 white 28 V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent /1601 blue 20 V neon lamp quick connector transparent / x 0.8 tin-plated 20 V neon lamp quick connector transparent / x 0.8 tin-plated 20 V neon lamp quick connector transparent / x 0.8 tin-plated 20 V neon lamp quick connector 2.8 x 0.8 tin-plated transparent /1502 Technical data see page - 28 Other voltages and versions with connection cable on request. - 0 Stock items are marked Signal lamps

28 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp, 10 mm, lens in arrow shape Pict.: Panel cut-out Voltage Power Terminals Operating life Colour of lens Order no. 14 V 1.2 W filament quick connector h opaque /0214 white 14 V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent /1601 blue 28 V 1.2 W filament quick connector h opaque /0214 white 28 V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent / V 1.2 W filament quick connector h transparent /1601 blue 20 V neon lamp quick connector transparent / x 0.8 tin-plated 20 V neon lamp quick connector transparent / x 0.8 tin-plated 20 V neon lamp quick connector transparent / x 0.8 tin-plated 20 V neon lamp quick connector 2.8 x 0.8 tin-plated transparent /1502 Integr. Technical data see page - 28 Other voltages and versions with connection cable on request. Signal lamps Stock items are marked - 1

29 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp, 14 mm Panel cut-out Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Length of collar Width of collar Overall height Mounting depth Mechanical design Mounting Terminals socket 4 mm 14 mm pressing into hole no Electrical characteristics Voltage Power 1.2 W Other specifications Operating life Degree of protection from front side IP40 Weight 5 g Approvals at 1.5 ma (T 85 C) VDE, SEV, FEMKO, DEMKO Integr. Signal lamps with integrated filament lamp, 14 mm, round lens, 28 V Pict.: blue Panel cut-out Voltage Power Terminals Operating life Colour of lens Order no. 28 V 1.2 W filament lamp quick connector 2.8 x 0.8 tin-plated 28 V 1.2 W filament quick connector 28 V 1.2 W filament quick connector 28 V 1.2 W filament quick connector 28 V 1.2 W filament quick connector Technical data see page h transparent h transparent h transparent h transparent h transparent blue / / / / / Stock items are marked Signal lamps

30 Signal lamps with integrated lamp Signal lamps with integrated neon lamp, 14 mm, round lens, 20 V Pict.: Panel cut-out Voltage Power Terminals Operating life Colour of lens Order no. 20 V 1.2 W neon lamp quick connector transparent / x 0.8 tin-plated 20 V 1.2 W neon lamp quick connector transparent / x 0.8 tin-plated 20 V 1.2 W neon lamp quick connector transparent / x 0.8 tin-plated 20 V 1.2 W neon lamp quick connector 2.8 x 0.8 tin-plated transparent /1502 Technical data see page - 2 Integr. Signal lamps Stock items are marked -

31 Signal lamps with lamp socket General data Signal lamps with lamp socket. The standard illumination is by a filament lamp; illumination with LED is available on request. The mm specification in the product name indicates the appropriate mounting hole diameter of the signal lamps. For further signal lamps, refer to the "8 mm" and "LUMOTAST" pushbutton ranges as well as the signal indicators of the "RAFIX" control component ranges. Content Signal lamps with lamp socket W 2 x 4.6d, 9.1 mm - 6 Signal lamps with lamp socket W 2 x 4.6d, 9.1 mm, round lens - 7 Signal lamps with lamp socket T 4.6, 9.1 mm - 8 Signal lamps with lamp socket T 4.6, 9.1 mm, round lens - 9 Signal lamps with lamp socket T 4.6, 9.1 mm, round lens - 9 Signal lamps with lamp socket T 5.5, 11.1 mm - 40 Signal lamps with lamp socket T 5.5, 11.1 mm, round lens - 41 Signal lamps with lamp socket BA 9s (MBC/MCC), 16.2 mm - 42 Signal lamps with lamp socket BA 9s (MBC/MCC), 16.2 mm, round lens - 4 Signal lamps with lamp socket BA 9s (MBC/MCC), 16.2 mm, round lens - 4 With Socket Signal lamps with lamp socket E 10 (MES), 16.2 mm - 44 Signal lamps with lamp socket E 10 (MES), 16.2 mm, round lens - 45 Signal lamps with lamp socket E 10 (MES), 16.2 mm, round lens - 45 Signal lamps with lamp socket E 10 (MES), 16.2 mm, round lens - 46 Signal lamps with lamp socket BA 9s (MBC/MCC), 18.2 mm - 48 Signal lamps with lamp socket BA 9s (MBC/MCC), 18.2 mm, round lens - 49 Signal lamps with lamp socket E 14, 22. mm - 50 Signal lamps with lamp socket E 14, IP40, 22. mm - 51 Signal lamps with lamp socket E 14, 22. mm, screw-on lens, IP40-51 Signal lamps with lamp socket E 14, 0.5 mm - 52 Signal lamps with lamp socket E 14, IP40, 0.5 mm - 5 Signal lamps with lamp socket E 14, IP40, 0.5 mm - 5 Signal lamps with lamp socket E 14, IP40, 0.5 mm - 54 Signal lamps with lamp socket BA 15d, 0.5 mm - 56 Signal lamps with lamp socket BA 15d, IP40, 0.5 mm - 57 Signal lamps with lamp socket BA 15d, IP40, 0.5 mm - 58 Signal lamps with lamp socket BA 15d, IP40, 0.5 mm - 58 Signal lamps Stock items are marked - 5

32 Signal lamps with lamp socket Signal lamps with lamp socket W 2 x 4.6d, 9.1 mm Pict.: Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth Mechanical design Mounting Terminals round 11 mm 7 mm 25.5 mm 9.1 mm ring nut quick connector A 2.8 x 0.5 tin-plated socket W 2 x 4.6d filament lamp Electrical characteristics Voltage Power Other specifications Degree of protection from front side Weight 42 V 1.2 W IP40 1 g Accessories Signal lamps with lamp socket W 2 x 4.6d, 9.1 mm With Socket Description Photo Order no. Page Filament lamp, W 2 x 4.6d base, 24-0 V / Filament lamp, W 2 x 4.6d base, 60 V / Filament lamp, W 2 x 4.6d base, 48 V / Filament lamp, W 2 x 4.6d base, 24 V / Filament lamp, W 2 x 4.6d base, 12 V / Filament lamp, W 2 x 4.6d base, 6 V / Protective sleeve made of Buna N (NBR), 7 x /0100 Fixing spanner M 9, M / Stock items are marked Signal lamps

33 Signal lamps with lamp socket Signal lamps with lamp socket W 2 x 4.6d, 9.1 mm, round lens Pict.: Voltage Power Colour of lens Order no. complete Order no. single parts Housing Lens 42 V 1.2 W filament lamp transparent / / / V 1.2 W filament lamp transparent / / / V 1.2 W filament lamp transparent / / / V 1.2 W filament lamp transparent / / / V 1.2 W filament lamp transparent blue / / /1601 Technical data see page - 6 Please order luminous elements separately. With Socket Signal lamps Stock items are marked - 7

34 Signal lamps with lamp socket Signal lamps with lamp socket T 4.6, 9.1 mm Pict.: Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth 11 mm 0.5 mm 9.1 mm Mechanical design Mounting ring nut Terminals solder terminals socket T 4.6 filament lamp Electrical characteristics Voltage Power Other specifications Degree of protection from front side Weight 42 V 1 W IP40 1 g Accessories Signal lamps with lamp socket T 4.6, 9.1 mm With Socket Description Photo Order no. Page Filament lamp, T 4.6 base, 12 V / Filament lamp, T 4.6 base, 24 V / Fixing spanner M 9, M / Stock items are marked Signal lamps

35 Signal lamps with lamp socket Signal lamps with lamp socket T 4.6, 9.1 mm, round lens Pict.: Voltage socket Colour of lens Order no. complete Order no. single parts Housing Lens 42 V T 4.6 filament lamp transparent / / / V T 4.6 filament lamp transparent / / / V T 4.6 filament lamp transparent / / / V T 4.6 filament lamp transparent / / /1510 Technical data see page - 8 Please order luminous elements separately. Signal lamps with lamp socket T 4.6, 9.1 mm, round lens Pict.: Voltage socket Colour of lens Order no. complete Order no. single parts Housing Lens With Socket 42 V T 4.6 filament lamp transparent / / / V T 4.6 filament lamp transparent / / / V T 4.6 filament lamp transparent / / / V T 4.6 filament lamp transparent / / /1502 Technical data see page - 8 Please order luminous elements separately. Signal lamps Stock items are marked - 9

36 Signal lamps with lamp socket Signal lamps with lamp socket T 5.5, 11.1 mm Pict.: Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth round protruding 1 mm 8 mm 42.5 mm 11.1 mm Mechanical design Mounting ring nut Terminals solder terminals socket T 5.5 DIN filament lamp Electrical characteristics Voltage Power Other specifications Degree of protection from front side Weight 42 V 1.2 W IP g Accessories Signal lamps with lamp socket T 5.5, 11.1 mm With Socket Description Photo Order no. Page Filament lamp, T 5.5 base, 24 V / Protective sleeve made of Buna N (NBR), 8 x /0100 Fixing spanner M 11, M / Stock items are marked Signal lamps

37 Signal lamps with lamp socket Signal lamps with lamp socket T 5.5, 11.1 mm, round lens Pict.: Voltage Power Colour of lens Order no. complete Order no. single parts Housing Lens 42 V 1.2 W filament lamp transparent / / / V 1.2 W filament lamp transparent / / / V 1.2 W filament lamp transparent / / / V 1.2 W filament lamp transparent / / /1502 Technical data see page - 40 Please order luminous elements separately. With Socket Signal lamps Stock items are marked - 41

38 Signal lamps with lamp socket Signal lamps with lamp socket BA 9s (MBC/MCC), 16.2 mm Pict.: Panel cut-out Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth Mechanical design Mounting Terminals socket 45.8 mm 16.2 mm ring nut quick-connect terminals for 2x 2.8x0.8 mm tin-plated BA 9 s filament lamp Electrical characteristics Voltage Power Other specifications Degree of protection from front side Weight Approvals 250 V 2 W 10 g SEV at 2 W Accessories Signal lamps with lamp socket BA 9s (MBC/MCC), 16.2 mm With Socket Description Photo Order no. Page Protective sleeve for terminals made of Buna N (NBR) /0100 Fixing spanner M 15, M / Stock items are marked Signal lamps

39 Signal lamps with lamp socket Signal lamps with lamp socket BA 9s (MBC/MCC), 16.2 mm, round lens Pict.: Voltage Power Degree of protection from front side Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens 250 V 2 W IP40 transparent / / / V 2 W IP40 transparent / / / V 2 W IP40 transparent / / / V 2 W IP40 transparent / / /1502 Technical data see page - 42 Accessories: Filament lamp, BA 9s base (MBC/MCC), V: /0000 Filament lamp, BA 9s base (MBC/MCC), 24-0 V: /0000 Filament lamp, BA 9s base (MBC/MCC), V: /0000 Signal lamps with lamp socket BA 9s (MBC/MCC), 16.2 mm, round lens Pict.: Voltage Power Degree of protection from front side Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens With Socket 250 V 2 W IP65 transparent / / / V 2 W IP65 transparent / / / V 2 W IP65 transparent / / / V 2 W IP65 transparent / / /1502 Technical data see page - 42 Accessories: Filament lamp, BA 9s base (MBC/MCC), V: /0000 Filament lamp, BA 9s base (MBC/MCC), 24-0 V: /0000 Signal lamps Stock items are marked - 4

40 Signal lamps with lamp socket Signal lamps with lamp socket E 10 (MES), 16.2 mm Pict.: Screw terminals, Panel cut-out Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth round 20 mm 16.2 mm Mechanical design Mounting ring nut Terminals socket E 10 filament lamp Electrical characteristics Voltage Power Other specifications Degree of protection from front side Weight Approvals at 2W (T= C) 250 V 2 W IP40 11 g VDE Accessories Signal lamps with lamp socket E 10 (MES), 16.2 mm With Socket Description Photo Order no. Page Filament lamp, E 10 (MES) base, 24-0 V / Filament lamp, E 10 (MES) base, V / Protective sleeve for terminals /0100 Fixing spanner M 15, M / Stock items are marked Signal lamps

41 Signal lamps with lamp socket Signal lamps with lamp socket E 10 (MES), 16.2 mm, round lens Pict.: Voltage Power Terminals Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated Technical data see page - 44 transparent transparent transparent transparent transparent blue Approval: VDE, SEV T70 C. Versions with 2.8 x 0.8 quick-connect terminals available on request / / / / / / / / / / / / / / /1601 Signal lamps with lamp socket E 10 (MES), 16.2 mm, round lens With Socket Pict.: Screw terminals, Voltage Power Terminals Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated Technical data see page - 44 Approval: VDE, SEV T70 C. transparent transparent transparent transparent transparent blue / / / / / / / / / / / / / / /1601 Signal lamps Stock items are marked - 45

42 Signal lamps with lamp socket Signal lamps with lamp socket E 10 (MES), 16.2 mm, round lens Pict.: Screw terminals, Voltage Power Terminals Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated 250 V 2 W screw terminals nickel-plated Technical data see page - 44 Approval: VDE, SEV T70 C. transparent transparent transparent transparent transparent blue / / / / / / / / / / / / / / /1601 With Socket - 46 Stock items are marked Signal lamps

43 Signal lamps with lamp socket Signal lamps with lamp socket BA 9s (MBC/MCC), 18.2 mm Pict.: Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth Mechanical design Mounting Terminals socket round 22 mm 14 mm 47 mm 18.2 mm ring nut quick-connect terminals for 2x 2.8x0.8 mm tin-plated BA 9 s filament lamp Electrical characteristics Voltage Power Other specifications Degree of protection from front side Weight Approvals 250 V 2 W IP65 22 g VDE T120 C bei 2 W Accessories Signal lamps with lamp socket BA 9s (MBC/MCC), 18.2 mm With Socket Description Photo Order no. Page Filament lamp, BA 9s base (MBC/MCC), V / Filament lamp, BA 9s base (MBC/MCC), 24-0 V / Filament lamp, BA 9s base (MBC/MCC), V / Protective sleeve for terminals made of Buna N (NBR) / Stock items are marked Signal lamps

44 Signal lamps with lamp socket Signal lamps with lamp socket BA 9s (MBC/MCC), 18.2 mm, round lens Pict.: Voltage Power Colour of lens Order no. complete Order no. single parts Housing Lens 250 V 2 W filament lamp transparent / / / V 2 W filament lamp transparent / / / V 2 W filament lamp transparent / / / V 2 W filament lamp transparent / / /1502 Technical data see page - 48 Please order luminous elements separately. When ordering as single parts, please add 1 x sealing ring /0100 for each signal lamp to your order. With Socket Signal lamps Stock items are marked - 49

45 Signal lamps with lamp socket Signal lamps with lamp socket E 14, 22. mm Pict.: Panel cut-out Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth round 28 mm 14 mm 46 mm 22. mm Mechanical design Mounting ring nut Terminals socket E 14 filament lamp Electrical characteristics Voltage Power Other specifications Degree of protection from front side Weight Approvals 1W (T100 C) Approvals 2W (T85 C) 250 V 2 W 21 g VDE VDE, DEMKO, NEMKO Accessories Signal lamps with lamp socket E 14, 22. mm Description Photo Order no. Page With Socket Filament lamp, E 14 base, 24-0 V / Sealing ring for IP / Protection against contact to VBG / Protective sleeve for terminals made of Buna N (NBR) /0100 Fixing spanner M 20, M 22, for ring nut / Stock items are marked Signal lamps

46 Signal lamps with lamp socket Signal lamps with lamp socket E 14, IP40, 22. mm Pict.: Voltage Degree of protection from front side Terminals Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens 250 V IP40 screw terminals brass nickel-plated 250 V IP40 screw terminals brass nickel-plated 250 V IP40 screw terminals brass nickel-plated 250 V IP40 screw terminals brass nickel-plated Technical data see page - 50 transparent transparent transparent transparent / / / / / / / / / / / /1502 Signal lamps with lamp socket E 14, 22. mm, screw-on lens, IP40 Pict.: Voltage Degree of protection from front side Terminals 250 V IP40 screw terminals brass nickel-plated 250 V IP40 screw terminals brass nickel-plated 250 V IP40 screw terminals brass nickel-plated 250 V IP40 screw terminals brass nickel-plated Technical data see page - 50 Panel cut-out Colour of lens Order no. complete Order no. single parts transparent transparent transparent transparent Housing Lens / / / / / / / / / / / /1502 With Socket Signal lamps Stock items are marked - 51

47 Signal lamps with lamp socket Signal lamps with lamp socket E 14, 0.5 mm Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth Mechanical design Mounting Terminals round 6 mm 58 mm 0.5 mm ring nut screw-terminals and quick-connect terminals for 2 x 2.8 x 0.8 mm socket E 14 filament lamp Electrical characteristics Voltage Power Other specifications Degree of protection from front side Weight 250 V 5 W 40 g Accessories Signal lamps with lamp socket E 14, 0.5 mm With Socket Description Photo Order no. Page Protection against contact to VBG / Protective sleeve for terminals /0100 Fixing spanner M 25, M / Stock items are marked Signal lamps

48 Signal lamps with lamp socket Signal lamps with lamp socket E 14, IP40, 0.5 mm Pict.: Voltage Power Degree of protection from front side Colour of lens Order no. complete Order no. single parts Housing Lens 250 V 5 W IP40 transparent / / / V 5 W IP40 transparent / / / V 5 W IP40 transparent / / / V 5 W IP40 transparent / / /1502 Technical data see page - 52 Accessories: Filament lamp, E 14 base, 24-0 V: /0000 Filament lamp, E 14 base, 24 V: /0000 Filament lamp, E 14 base, V: /0000 Single-wire screw terminal with clamp: 2 x 0.75 to 2.5 mm 2, stranded core with wire end sleeve: 2 x 0.75 to 1.5 mm 2, quick-connect terminal suitable for 2 x 2.8 x 0.8 tin-plated for soldering. Signal lamps with lamp socket E 14, IP40, 0.5 mm With Socket Pict.: Voltage Power Degree of protection from front side Colour of lens Order no. complete Order no. single parts Housing Lens 250 V 5 W IP40 transparent / / / V 5 W IP40 transparent / / / V 5 W IP40 transparent / / / V 5 W IP40 transparent / / /1502 Technical data see page - 52 Accessories: Filament lamp, E 14 base, 24-0 V: /0000 Filament lamp, E 14 base, 24 V: /0000 Filament lamp, E 14 base, V: /0000 Single-wire screw terminal with clamp: 2 x 0.75 to 2.5 mm 2, stranded core with wire end sleeve: 2 x 0.75 to 1.5 mm 2, quick-connect terminal suitable for 2 x 2.8 x 0.8 tin-plated for soldering. Signal lamps Stock items are marked - 5

49 Signal lamps with lamp socket Signal lamps with lamp socket E 14, IP40, 0.5 mm Pict.: Voltage Power Degree of protection from front side Colour of lens Order no. complete Order no. single parts Housing Lens 250 V 5 W IP40 transparent / / / V 5 W IP40 transparent / / / V 5 W IP40 transparent / / / V 5 W IP40 transparent / / /1502 Technical data see page - 52 Accessories: Filament lamp, E 14 base, 24-0 V: /0000 Filament lamp, E 14 base, V: /0000 Single-wire screw terminal with clamp: 2 x 0.75 to 2.5 mm 2, stranded core with wire end sleeve: 2 x 0.75 to 1.5 mm 2, quick-connect terminal suitable for 2 x 2.8 x 0.8 tin-plated for soldering. With Socket - 54 Stock items are marked Signal lamps