Position switches FR series
|
|
- Felicia Osborne
- 7 years ago
- Views:
Transcription
1 Position switches FR series Selection diagram 01 A A2 A4 05 A5 external rubber gasket external rubber gasket external rubber gasket external rubber gasket external rubber gasket stainless steel round rod square rod fiber glass rod porcelain roller ACTUATORS WITH RESET 01-W 02-W 05-W 0-W -W 0-W 1-W 51-W CONTACT BLOCKS slow action slow action slow action snap action snap action snap action slow action slow action and slow action NO+ NC +1NC 2x() slow action slow action slow action slow action slow action snap action independent closer slow action electronic CONDUIT ENTRY product option Threaded conduit entry PG 1,5 (standard) A PG 11 M1 M16x1,5 M2 Mx1,5 M 1/2 NPT With assembled cable gland for Ø 6 to Ø mm K21 cables range for Ø to Ø mm K25 cables range With M plastic connector assembled and wired K0 K45 4 poles from bottom 8 poles from bottom With M metal connector assembled and wired K K60 8 poles from bottom 4 poles from bottom accessory sold separately 2/ General Catalog 1-
2 0 A stainless steel stainless steel stainless steel external Ø 11 mm Ø mm rope switches Ø mm Ø mm Ø mm rubber gasket roller roller for signalling roller roller roller adjustable lever safety adjustable lever without actuator LOOSE ACTUATORS See page 2/51 52-W 54-W 56-W 5-W 8-W without actuator Code structure Attention! The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office. article options FR 2-1WXGM2K0 Housing FR Suffix polymer housing, one conduit entry 5, snap action 6, slow action, slow action Actuators 01 short plunger 02 roller lever 05 offset roller lever no suffix (standard) with stainless steel roller: - Ø mm for actuator A4, - Ø mm for actuators A2, 02, A5, 05 - Ø mm for actuators 0, 1, 51, 52, 54, 55, 56, 5 with Ø 5 mm polymer roller (see special loose actuators on page 2/52) with Ø mm rubber roller (see special loose actuators on page 2/52) with Ø mm overhanging rubber roller (see special loose actuators on page 2/52) General Catalog 1- Contacts type G Reset hooking W W4 For the complete list of all combinations, please contact our technical office. Threaded conduit entry silver contacts (standard) silver contacts gold plated 1 µm (contact block 2 excluded) External metallic parts X zinc plated steel (standard) stainless steel without reset (standard) simultaneous reset Preinstalled cable gland or connectors simultaneous reset with increased force no cable gland or connector (standard) K21 assembled cable gland (see conduit entry page 2/) K0 4 poles M assembled plastic connector (see conduit entry page 2/) PG 1,5 (standard) A PG 11 M1 M2 M M16x1,5 Mx1,5 1/2 NPT 2/42
3 Position switches FR series Technical data Housing Made of glass-reinforced polymer, self-extinguishing, shock-proof thermoplastic resin and with double insulation One threaded conduit entry Protection degree: IP6 according to EN with cable gland having equal or higher protection degree General data Ambient temperature: from -25 C to +80 C Version for operation in ambient temperature from - C to +80 C on request Max actuation frequency: 600 operations cycles 1 /hour Mechanical endurance: million operations cycles 1 Assembling position: any Driving torque for installation: see pages /1-/ One operation cycle means two movements, one to close and one to open contacts, as foreseen by EN standard. Main data Polymer housing, one conduit entry Protection degree IP6 1 contact blocks available 48 actuators available External stainless steel parts versions M assembled connector versions Silver contacts gold plated versions Markings and quality marks: Approval IMQ: EG6 Approval UL: 18 Approval CCC: Approval EZU: Approval GOST: POCC IT.AB24.B045 Cross section of the conductors (flexible copper wire), 21,,, 4: min. 1 x 0,4 mm 2 (1 x AWG ) max. 2 x 1,5 mm 2 (2 x AWG 16) 5, 6,, 9,, 11,, 1,,, 16, 18: min. 1 x 0,5 mm 2 (1 x AWG ) max. 2 x 2,5 mm 2 (2 x AWG ) Contact block 2: min. 1 x 0,5 mm 2 (1 x AWG ) max. 2 x 1,5 mm 2 (2 x AWG 16) In conformity with standards: IEC , EN , EN , EN 04, IEC 604-1, EN 604-1, EN 88, EN ISO 0-1, EN ISO 0-2, IEC 60529, EN 60529, NFC 6-1, VDE , VDE 011. Approvals: IEC , UL 8, GB In conformity with requirements requested by: Low Voltage Directive 06/95/EC, Machinery Directive 06/42/EC and Electromagnetic Compatibility 04/8/EC. Positive contact opening in conformity with standards: IEC , EN , VDE Installation for safety applications: Use only switches marked with the symbol. The safety circuit must always be connected with the NC contacts (normally closed contacts: 11-, 21- or 1-2) as stated in the standard EN , encl. K, par. 2. The switch must be actuated with at least up to the positive opening travel shown in the travels diagrams on page /6. The switch must be actuated at least with the positive opening force, shown in brackets, underneath each article, near the value of the min. force. If not expressly indicated in this chapter, for the right installation and the correct utilization of all articles see requirements indicated from page /1 to page /. Electrical data Utilization categories without connector with 4 poles M connector Thermal current (Ith): Rated insulation voltage (Ui): A 0 Vac 600 Vdc 0 Vac 0 Vdc (contact blocks 2, 11,,, 21,,, 4) Rated impulse withstand voltage (U imp ): 6 kv 4 kv (contact blocks, 21,,, 4) Conditional shot circuit current: 00 A according to EN Protection against short circuits: fuse A 0 V type am Pollution degree: Thermal current (Ith): 4 A Rated insulation voltage (Ui): 2 Vac 00 Vdc Protection against short circuits: fuse 4 A 0 V type gg Pollution degree: Alternate current: AC (...60 Hz) Ue (V) Ie (A) Direct current: DC1 Ue (V) Ie (A) 6 1,1 0,4 Alternate current: AC (...60 Hz) Ue (V) Ie (A) Direct current: DC1 Ue (V) Ie (A) 4 1,1 0,4 with 8 poles M connector Thermal current (Ith): 2 A Rated insulation voltage (Ui): 0 Vac 6 Vdc Protection against short circuits: fuse 2 A 0 V type gg Pollution degree: Alternate current: AC (...60 Hz) Ue (V) 24 Ie (A) 2 Direct current: DC1 Ue (V) 24 Ie (A) 2 2/4 General Catalog 1-
4 Data type approved by IMQ, CCC and EZU Rated insulation voltage (Ui): 0 Vac 0 Vac (for contact blocks 2, 11,,, 21,,, 4) Thermal current (Ith): A Protection against short circuits: fuse A 0 V type am Rated impulse withstand voltage (U imp ): 6 kv 4 kv (for contact blocks, 21,,, 4) Protection degree: IP6 MV terminals (screw clamps) Pollution degree Utilization category: AC Operation voltage (Ue): 0 Vac ( Hz) Operation current (Ie): A Forms of the contact element: Za, Zb, Za+Za, Y+Y, X+X, Y+Y+X, Y+Y+Y, Y+X+X Positive opening of contacts on contact block 5, 6,, 9, 11, 1,, 16, 18,, 21,,, 4 Data type approved by UL Utilization categories Q00 (69 VA, 5-2 Vdc) A600 ( VA, Vac) Data of the housing type 1, 4X indoor use only,, 1 For all contact blocks except 2 and use 60 or 5 C copper (Cu) conductor and wire size No. - AWG. Terminal tightening torque of,1 lb in (0.8 Nm). For contact blocks 2 and use 60 or 5 C copper (Cu) conductor and wire size No. AWG. Terminal tightening torque of lb in (1.4 Nm). In conformity with standard: UL 8 Please contact our technical service for the list of approved products. In conformity with standards: EN , EN A1:09, fundamental requirements of the Low Voltage Directive 06/95/CE. Please contact our technical service for the list of approved products. Adjustable levers In switches with revolving lever it is possible to adjust the lever with steps for the whole 60 range. The positive movement transmission is always guaranteed thanks to the particular geometrical coupling between the lever and the revolving shaft as prescribed for safety applications by the German standard BG-GS- ET-. Overturning levers It s possible to fasten the lever on switches on straight or reverse side, maintaining the positive coupling. In this way it is possible to obtain two different work plans of the lever. Rotating heads In all switches, it is possible to rotate the head in 90 steps. Working operation of contact block 16 with independent contacts The contact block 16 has two NC contacts, both with positive opening activated independently according to the lever turning direction. Lever turned to left Lever not turned Lever turned to right Contacts diagram Contacts diagram Contacts diagram General Catalog 1-2/44
5 Position switches FR series LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic LO L 1 1 LV LS L L FR 1 FR 601 FR 01 FR 901 FR 01 FR 11 FR 11 FR 1 FR 11 FR 01 FR 1801 FR 01 FR 21 FR 21 FR 1 FR Ø 8 1NO+ NC +1NC 2x() page /5 - type 4 page /6 - group FR 5A1 FR 6A1 FR A1 FR 9A1 FR A1 FR 11A1 FR A1 FR 1A1 FR A1 FR A1 FR 18A1 FR A1 FR 21A1 FR A1 FR A1 Ø Ø 8 1NO+ NC +1NC page /5 - type 4 6 N (25 N ) page /6 - group FR 2 FR 602 FR 02 FR 902 FR 02 FR FR FR 2 FR FR 02 FR 1802 FR 02 FR 22 FR FR 2 FR E2 1NO+ NC +1NC 5.5 2x() page /5 - type 6 N (25 N ) page /6 - group FR 5A2 FR 6A2 FR A2 FR 9A2 FR A2 FR 11A2 FR A2 FR 1A2 FR A2 FR A2 FR 18A2 FR A2 FR 21A2 FR A2 FR 2A2 FR A2 1NO+ NC +1NC 5.5 2x() page /5 - type 4, N (25 N ) page /6 - group 2 With Ø mm stainless steel roller on request (29-5) (1-2) 11 LO L 1 1 LV LS L L FR 5A4 FR 6A4 FR A4 FR 9A4 FR A4 FR 11A4 FR A4 FR 1A4 FR A4 FR A4 FR 18A4 FR A4 FR 21A4 FR A4 FR A4 1NO+ NC +1NC page /5 - type 5 6 N (25 N ) page /6 - group FR 5 FR 605 FR 05 FR 905 FR 05 FR FR FR 5 FR 15 FR 05 FR 1805 FR 05 FR 25 FR 25 FR 5 FR E5.4 1NO+ NC +1NC 2x() page /5 - type 6 N (25 N ) page /6 - group FR 5A5 FR 6A5 FR A5 FR 9A5 FR A5 FR 11A5 FR A5 FR 1A5 FR A5 FR A5 FR 18A5 FR A5 1NO+ FR 21A5 NC FR A5 +1NC FR 2A5 2x() FR A5 page /5 - type 4, N (25 N ) page /6 - group FR FR 60 FR 0 FR 90 FR 0 FR 1 FR 1 FR FR 1 FR 0 FR 180 FR 0 FR 2 FR 2 FR FR E 1NO+ NC +1NC 2x() page /5 - type 4 N (25 N ) page /6 - group Accessories See page 6/1 All measures in the drawings are in mm 2/45 General Catalog 1-
6 Fixed only by threaded head in vertical position LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic LO L 1 1 LV LS L L (29-5) (1-2) FR 5A FR 6A FR A FR 9A FR A FR 11A FR A FR 1A FR A FR A FR 18A FR A 1NO+ FR 21A NC FR A +1NC FR 2A 2x() FR A page /5 - type N (25 N ) page /6 - group FR 8 FR 608 FR 08 FR 908 FR 08 FR 18 FR 18 FR 8 FR 18 FR 08 FR 1808 FR 08 FR FR FR 8 FR E8 Ø 1NO+ NC +1NC 2x() page /5 - type 4 page /6 - group FR 5 FR 6 FR FR 9 FR FR 11 FR FR 1 FR FR FR 18 FR FR 21 FR FR 2 FR Mx1 1NO+ NC +1NC 2x() page /5 - type 4 page /6 - group 1 Ø FR 5 FR 6 FR FR 9 FR FR 11 FR FR 1 FR FR FR 18 FR FR 21 FR FR 2 FR M 18x1 24 1NO+ NC +1NC 2x() page /5 - type 4 page /6 - group 1 Ø 8 4 Ø 11 mm polymer roller Ø mm stainless steel roller M 18x R LO L 1 1 LV LS L L FR 51 FR 61 FR 1 FR 91 FR 1 FR 111 FR 1 FR 11 FR 1 FR 1 FR 181 FR 1 FR 211 FR 1 FR 21 FR 1 1NO+ NC +1NC 2x() page /5 - type 2 page /6 - group 1 FR 5 FR 6 FR FR 9 FR FR 11 FR FR 1 FR FR FR 18 FR FR 21 FR FR 2 FR 1NO+ NC +1NC 2x() page /5 - type 4 page /6 - group 1 FR 5 FR 6 FR FR 9 FR FR 11 FR FR 1 FR FR FR 18 FR FR 21 FR FR 2 FR 1NO+ NC +1NC 2x() page /5 - type 2 page /6 - group 1 FR 5-1 FR 6-1 FR -1 FR 9-1 FR -1 FR 11-1 FR -1 FR 1-1 FR -1 FR -1 FR 18-1 FR -1 FR 21-1 FR -1 FR 2-1 FR -1 1NO+ NC +1NC 2x() page /5 - type 2 page /6 - group 1 Items with code on the green background are available in stock General Catalog 1-2/46
7 2B Position switches FR series Fixed only by threaded head in vertical position LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic LO L 1 1 LV LS L L 92.5 FR 516 FR 616 FR 16 FR 916 FR 16 FR 1116 FR 16 FR 116 FR 16 FR 16 FR 1816 FR 16 FR 2116 FR 16 FR 216 FR 16 1NO+ NC +1NC 2x() page /5 - type 2 page /6 - group FR 51 FR 61 FR 1 FR 91 FR 1 FR 111 FR 1 FR 11 FR 1 FR 1 FR 181 FR 1 FR 211 FR 1 FR 21 FR 1.8 1NO+ NC +1NC 2x() page /5 - type 2 page /6 - group 1 1 Mx1.5 4 FR FR FR FR 18 FR FR 21 FR FR 2 FR Ø 1NO+ NC +1NC 2x() 1 m/s 0,0 Nm page /6 - group FR 521 FR 21 FR 11 FR 1821 FR 21 FR 21 FR 21 FR 1 FR 21 1NO+ NC +1NC 2x() 1 m/s 0,0 Nm page /6 - group 4 Ø 1.2 With Ø mm stainless steel roller on request Other rollers available. See page 2/52 x mm square rod LO L 1 1 LV LS 1I L L FR 525 FR 25 FR FR 1825 FR 25 FR 25 FR 25 FR 5 FR 25 1NO+ NC +1NC 2x() 1 m/s 0, Nm page /6 - group 4 Ø FR FR 60 FR 0 FR 90 FR 0 FR 1 FR 0 FR FR 1 FR 0 FR 160 FR 180 FR 0 FR 2 FR 0 FR 20 FR E NO+ NC +1NC 2x() page /5 - type 1 page /6 - group FR 51 FR 61 FR 1 FR 91 FR 1 FR 111 FR 1 FR 11 FR 1 FR 1 FR 161 FR 181 FR 1 1NO+ FR 211 NC FR 1 +1NC FR 21 2x() FR 1 page /5 - type 1 page /6 - group FR 5 FR 6 FR FR 9 FR FR 11 FR FR 1 FR FR FR 16 FR 18 FR FR 21 FR FR 2 FR xx NO+ NC +1NC 5 2x() 1,5 m/s 0,06 Nm page /6 - group 5 Accessories See page 6/1 2/4 General Catalog 1-
8 Ø mm stainless steel round rod Other rollers available. See page 2/52 Other rollers available. See page 2/52 LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic LO L 1 1 LV LS 1I L L FR 54 FR 64 FR 4 FR 94 FR 4 FR 1 FR 4 FR FR 4 FR 4 FR 164 FR 184 FR 4 FR 2 FR 4 FR 24 FR 4 Ø. 1NO+ NC +1NC x() 1,5 m/s 0,06 Nm page /6 - group FR 5 FR 6 FR FR 9 FR FR 10 FR FR 0 FR FR FR 16 FR 18 FR FR 20 FR FR 2 FR E0 Øx NO+ NC +1NC 5 2x() 1,5 m/s 0,06 Nm page /6 - group FR 551 FR 651 FR 51 FR 951 FR 51 FR 11 FR 51 FR 1 FR 51 FR 51 FR 1651 FR 1851 FR 51 FR 21 FR 51 FR 251 FR.6 1NO+ NC +1NC 54 2x() page /5 - type 1 page /6 - group FR 552 FR 652 FR 52 FR 952 FR 52 FR FR 52 FR 2 FR 52 FR 52 FR 1652 FR 1852 FR 52 1NO+ FR 22 NC FR 52 +1NC FR 252 2x() FR E2 page /5 - type 1 page /6 - group 5 Porcelain roller Other rollers available. See page 2/52 Other rollers available. See page 2/52 Other rollers available. See page 2/52 LO L 1 1 LV LS 1I L L Ø 9 FR 55-E0V9 FR 65-E0V9 FR 5-E0V9 FR 95-E0V9 FR 5-E0V9 FR 5-E0V9 FR -E0V9 FR 5-E0V9 FR 5-E0V9 FR 185-E0V9 FR 5-E0V9 FR 2-E0V9 FR 5-E0V9 FR 25-E0 FR E-E0V NO+ NC +1NC 2x() 0,5 m/s 0,0 Nm (0,25 Nm ) page /6 - group FR 554 FR 654 FR 54 FR 954 FR 54 FR FR 54 FR 4 FR 54 FR 54 FR 1654 FR 1854 FR 54 FR 24 FR 54 FR 254 FR E NO+ NC +1NC 2x() page /5 - type 1 page /6 - group FR 555 FR 655 FR 55 FR 955 FR 55 FR 15 FR 55 FR 5 FR 55 FR 55 FR 1655 FR 1855 FR 55 1NO+ FR 25 NC FR 55 +1NC FR 255 2x() FR E5 page /5 - type 1 page /6 - group FR 556 FR 656 FR 56 FR 956 FR 56 FR 16 FR 56 FR 6 FR 56 FR 56 FR 1656 FR 1856 FR 56 FR 26 FR 56 FR 256 FR E6 29 1NO+ NC +1NC 2x() page /5 - type 1 page /6 - group 5 Items with code on the green background are available in stock Positive opening only with lever adjusted on the max. See page 2/51. General Catalog 1-2/48
9 Position switches FR series Other rollers available. See page 2/52 Fiber glass rod Rope switches for signalling LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic LO L 1 1 LV LS 1I L L FR 55 FR 65 FR 5 FR 95 FR 5 FR 1 FR 5 FR FR 5 FR 5 FR 165 FR 185 FR 5 FR 2 FR 5 FR 25 FR E 1NO+ NC +1NC 2x() page /5 - type 1 page /6 - group X.2 Ø6x0 6.5 FR 569 FR 669 FR 69 FR 969 FR 69 FR 1169 FR 69 FR 169 FR 69 FR 69 FR 1669 FR 1869 FR 69 1NO+ FR 2169 NC FR 69 +1NC FR 269 2x() FR 69 1,5 m/s 0,06 Nm page /6 - group FR 56 FR 66 FR 6 FR 96 FR 6 FR 116 FR 6 FR 16 FR 6 FR 6 FR 186 FR 6 +1NC FR 216 NO FR 6 1NO+ FR 26 2x() 0,5 m/s initial N - final N page /6 - group Position switches FR series with reset Pizzato Elettrica has developed a reset device code W to make perfectly simultaneous the actuator and the contact block tripping. The new device is a block inserted between the switch body and the head, and could be rotated independently from this last one. This new device has following advantages: The reset device integrate in almost all standard actuation head with snap action are no more necessary because the tripping movement is made by the reset device itself The reset device can be rotated independently from the head for the maximum flexibility during the assembling Two driving forces: standard and increased for applications with vibrations Mechanical endurance: 1 million operations cycles. 2(29-5) (1-2) Ø L L L FR 601-W FR 901-W FR 01-W FR 01-W FR 21-W FR 21-W FR 1-W 1NO+ NC +1NC + page /5 - type 4 4,5 N (25 N ) page / - group 1 FR 602-W FR 902-W FR 02-W FR 02-W FR 22-W FR -W FR 2-W 1NO+ NC +1NC + page /5 - type 4 N (25 N ) page / - group 2 FR 605-W FR 905-W FR 05-W FR 05-W FR 25-W FR 25-W FR 5-W 1NO+ NC +1NC + page /5 - type 4 N (25 N ) page / - group 2 FR 60-W FR 90-W FR 0-W FR 0-W FR 2-W FR 2-W FR -W 1NO+ NC +1NC + page /5 - type 2,5 N (25 N ) page / - group Accessories See page 6/1 2/49 General Catalog 1-
10 With Ø mm stainless steel roller on request Other rollers available. See page 2/52 Other rollers available. See page 2/ L L L FR 6-W FR 9-W FR -W FR -W FR 21-W FR -W FR 2-W 4 1NO+ NC +1NC + page /5 - type 2 4,5 N (25 N ) page / - group FR 60-W FR 90-W FR 0-W FR 0-W FR 2-W FR 0-W FR 20-W 2 1NO+ NC +1NC + page /5 - type 1 0,0 Nm (0,25 Nm ) page / - group FR 61-W FR 91-W FR 1-W FR 1-W FR 211-W FR 1-W FR 21-W 2 1NO+ NC +1NC + page /5 - type 1 0,0 Nm (0,25 Nm ) page / - group 4.5 FR 651-W FR 951-W FR 51-W FR 51-W FR 21-W FR 51-W FR 251-W NO+ NC +1NC + page /5 - type 1 0,0 Nm (0,25 Nm ) page / - group 4 Other rollers available. See page 2/52 Other rollers available. See page 2/52 Other rollers available. See page 2/52 Other rollers available. See page 2/ L L L FR 652-W FR 952-W FR 52-W FR 52-W FR 22-W FR 52-W FR 252-W NO+ NC +1NC + page /5 - type 1 0,0 Nm (0,25 Nm ) page / - group FR 654-W FR 954-W FR 54-W FR 54-W FR 24-W FR 54-W FR 254-W NO+ NC +1NC + page /5 - type 1 0,0 Nm (0,25 Nm ) page / - group FR 656-W FR 956-W FR 56-W FR 56-W FR 26-W FR 56-W FR 256-W 2 1NO+ NC +1NC + page /5 - type 1 0,0 Nm (0,25 Nm ) page / - group FR 65-W FR 95-W FR 5-W FR 5-W FR 2-W FR 5-W FR 25-W 2.1 1NO+ NC +1NC + page /5 - type 1 0,0 Nm (0,25 Nm ) page / - group 4 Increased actuating force The switch can be supplied with an increased actuating force (option W4); ideal for applications with vibrations. Actuator Force 01,,, 16 N 02, 05 6 N 0,5 N ,08 Nm Items with code on the green background are available in stock General Catalog 1-2/
11 Position switches FR series Position switches with revolving lever without actuator LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic LO L 1 1 LV LS 1I L L FR 58 FR 68 FR 8 FR 98 FR 8 FR 118 FR 1 FR 18 FR 8 FR 8 FR 168 FR 188 FR 8 1NO+ FR 218 NC FR 8 +1NC FR 2x() FR 8 page /6 - group 5 With manual reset knob.2 FR 68-W FR 98-W FR 8-W FR 8-W FR 218-W FR 8-W FR -W 0.9 1NO+ NC +1NC + 0,0 Nm (0,25 Nm ) page / - group 4 IMPORTANT For safety applications: join only switches and actuators marked with symbol. For more information about safety applications see page /1. Loose actuators IMPORTANT: These loose actuators can be used with items of series FR, FM, FX, FZ, FK only. Polymer roller Ø 18 mm Polymer roller Ø 18 mm Adjustable square rod xx5 mm Flexible rod actuator Adjustable round rod Ø x5 mm Polymer roller Ø mm xx Ø6x Ø Ø x VF LE0 VF L VF LE VF LE4 VF LE VF LE51 Polymer roller Ø mm Porcelain roller Polymer roller Ø mm Adjustable actuator with polymer roller Adjustable safety actuator with polymer roller Polymer roller Ø mm Adjustable fiber glass rod VF LE52 VF LE5 (2) VF LE54 VF LE55 VF LE56 VF LE5 VF LE69 - Only orders for multiple quantities of the packs are accepted. - Actuator VF LE55 suits to safety applications only if adjusted to its max length, as you can see in figure beside. If you need an adjustable lever for safety applications, use the adjustable safety lever VF LE56. - (2) The position switch obtained by assembling the switch FR 8 (e.g. FR 58, FR 68) with the actuator VF LE5 will not present the same travel diagrams and actuating forces as the position switch FR 5-E0V9 (e.g. FR 55-E0V9, FR 65-E0V9...). - The actuator cannot be oriented to inside direction because it will mechanically interfere with the switch head. 9 Accessories See page 6/1 2/51 General Catalog 1-
12 Special loose actuators IMPORTANT: These loose actuators can be used with items of series FR, FM, FX, FZ, FK only. Ø mm stainless steel rollers VF L-1 VF LE51-1 VF LE52-1 VF LE54-1 VF LE55-1 VF LE56-1 VF LE5-1 Ø 5 mm polymer rollers VF L-2 VF LE51-2 VF LE52-2 VF LE54-2 VF LE55-2 VF LE56-2 VF LE5-2 Ø mm rubber rollers VF L-R5 VF LE51-R5 VF LE52-R5 VF LE54-R5 VF LE55-R5 VF LE56-R5 VF LE5-R5 Ø mm rubber rollers Ø mm overhanging rubber rollers VF LE51- VF LE52- VF LE54- VF LE55- VF LE56- VF LE VF LE55-4 VF LE56-4 Items with code on the green background are available in stock General Catalog 1-2/52
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationLC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - 220 V AC coil
Product data sheet Characteristics LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationSafety detection solutions
Presentation, actuator operated etal, types CS A, CS B, CS C and CS E Plastic, double insulated, turret head, types CS P or CS PA or CS TA and CS TE etal, types CS A, CS B, CS C, CS E with or without locking
More information33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
More informationCommand devices Pull-wire emergency stop switches One-side operation ZS 71 range 6.1 6.1.1 6.1.1.1. 312 Schmersal -10 0 10 20 30 40 50 60 70 T [] C
.1.1.1 One-side operation ZS 71 range 40 30 ø10 10 53,5(63)* 6 8 18 24 105 33 56 12 22 M20x1,5 52 17,5 42 15 Features To EN 418 / IEC 60947-5-5 Metal enclosure 2 contacts Small body 2 cable entries M20
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationHS5D. Miniature Interlock Switches First in. Head Removal Detection Function for Safer Performance. First in. the Industry.
y HS5D First in the Industry Miniature Interlock Switches First in the Industry Head Removal Detection Function for Safer Performance (*based on IDEC research, July 09) New Generation Miniature Interlock
More informationNF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101433D0201 28/03/11 NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits.
More informationRM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
More informationElectronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.
More informationElectronic overload relay EF19 and EF45
Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
More informationSafe switching and monitoring Solenoid Interlocks
Safe switching and monitoring Solenoid Interlocks Solenoid locking switches are used on sliding, hinged and removable guard doors that must be closed and locked for operator safety. It is a two part system
More informationSafety dialogue solutions
General Presentation Emergency stop trip wire switches Emergency stop trip wire switches are designed to: b avert hazards (dangerous phenomena) at the earliest possible moment, or to reduce risks which
More informationAF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits
More informationONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
More informationElectronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
More informationDuct Humidity Transmitter
SDC-H Duct Humidity Transmitter Features Replaceable sensor element Humidity measurement for air ducts Minimum and maximum value memory 0 0V, 0 0mA or 0V, 4 0mA measuring signals selectable with jumpers
More informationCommon Features of Electromechanical Switches
Common Features of Electromechanical Switches Switching systems Switching elements lie at the heart of all electromechanical switching devices and must correspond to the respective application. Essentially
More informationRM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More informationR.C.C.B. s two-pole LEXIC
87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...
More informationSystem 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More informationMachine Safety Switches
Machine Switches SI-LS31H Series 31 mm Limit-Switch-Style with Hinged Lever Actuators Features Limit switch design (EN 50047) For use on doors or flaps Positive opening safety contacts (IEC 60947-5-1)
More informationVoltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationSafety automation solutions
Operating principle, characteristics Preventa safety s types XPS AV,, For and switch monitoring Operating principle Safety s XPS AV, and are used for monitoring circuits conforming to standards EN/ISO
More informationPosition Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
More informationType: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description
Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
More informationPendant control stations 6
Characteristics 6 Environment Conformity to standards EN/IEC 6097-5-1 EN/IEC 600-, UL 508, CSA C- n EN/IEC 6097-5-5 and EN/ISO 850 for versions with trigger action Emergency stop Product certifications
More informationRM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters
Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main
More informationType: DILM32 10(24V50HZ) Article No.: 277247
Type: DILM32 10(24V50HZ) Article No.: 277247 Ordering information Rated operational current AC 3 400 V I e A 32 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,
More informationE-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More informationWE-350 Series ¼ Turn Electric Actuator
WE-350 Series ¼ Turn Electric Actuator Operation and Installation Manual Pg 1 (Rev. 020113) Table of Contents 1.0 General 1.1 Pre-Installation Inspection 1.2 Storage 1.3 Features & General Information
More informationType: DILM50(230V50HZ,240V60HZ) Article No.: 277830
Type: DILM50(230V50HZ,240V60HZ) Article No.: 277830 Ordering information Rated operational current AC 3 400 V I e A 50 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase
More informationManual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and
More informationThree-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
More informationRelés e Contatores de Estado Sólido SIRIUS
Relés e Contatores de Estado Sólido SIRIUS Coletânea de dados técnicos ( product data sheet ) Agosto/212 SSR - 3RF21 22,5 mm Ponto Zero SSR - 3RF2 45 mm Ponto Zero SSR - 3RF22 45 mm Ponto Zero Trifásico
More informationAutoLink Three-Phase Sectionalizer Specifications. Scope. General. Applicable Standards. Operating principle
Scope This specification stipulates the minimum requirements for mechanically linked three-phase electronic sectionalizers, for use on outdoor medium voltage overhead lines of 15, 27, and 38 kv. Electronic
More informationThermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
More information49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
More informationVoltage monitoring relays CM-ESS.M For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationType: DILM9 10(24VDC) Article No.: 276705
Type: DILM9 10(24VDC) Article No.: 276705 Ordering information Rated operational current AC 3 400 V I e A 9 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors, 50
More informationOLI. Oil level indicator
OLI Oil level indicator Oil level indicator Unexpected or accidental oil leakages may occur randomly along transformer s lifetime. Clear indication of oil level inside transformer tank and on load tap
More informationType: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
More informationABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.
1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay
More informationSENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications
Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:
More informationOrdering Information. Cylindrical Proximity Sensor E2E/E2E2
Cylindrical Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened
More informationGeneral 1-2-Opto-electronics Safety Switches 4-Emergency
General 1-2-Opto-electronics Safety Switches 4-Emergency Logic Power The Lifeline 4 cable/push button operated system can be installed along or around awkward machinery such as conveyors and provide a
More informationBETA Switching. Switching Devices. 5TT5 8 Insta contactors, AC technology. Overview
BETA Switching Siemens AG 200 5TT5 Insta contactors, AC technology Overview The 5TT5 Insta contactors are equipped with an AC magnetic system and are ideal for use under harsh conditions. The auxiliary
More informationSTEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase
Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff
More informationOperating Instructions
Important information: These instructions contain safety information, read and follow them carefully. Dialight will not accept any responsibility for injury, damage or loss which may occur due to incorrect
More information400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More information48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
More informationTechnicaldata General
Currenttransformer-operatedoverloadrelay,60-90A,1N/O+1N/C Partno. ZW7-90 Articleno. 002618 CatalogNo. XTOT090C3S Deliveryprogramme Product range ZW7 current transformer-operated overload relays Description
More information08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
More informationPressure monitoring equipment for oil-sf 6. bushings, type GOEK
Pressure monitoring equipment for oil-sf 6 bushings, type GOEK Installation and maintenance guide 5693 827-6 en, Rev. 3, 2002-01-30 This document must not be copied without our written permission, and
More informationSOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
More informationDEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050
Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage
More informationDirectory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More informationVario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
More information9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G. January. Catalog
9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G Catalog January 07 Contents Commercial Pressure Switches Pressure Switches b Selection..............................................
More informationRedundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
More information38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More informationContact expander modules
Gertebild ][Bildunterschrift Kontakterweiterungen Contact expansion module for increasing the number of available contacts Approvals Zulassungen Unit features Gertemerkmale Positive-guided relay outputs:
More information38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
More informationElectro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
More informationDigital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
More informationYour Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
More informationTemperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)
Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,
More informationPNOZsigma - Base units
PNOZsigma - Base units Register Login Sensors Control and Communication Electronic monitoring relays Safety Relays PNOZ X PNOZsigma PNOZelog PNOZmulti PNOZpower Configurable control systems Programmable
More informationN20xxA, N34xxA NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING AND 2-POSITION CONTROL
N2xxA, N34xxA NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING AND 2-POSITION CONTROL SPECIFICATIONS Supply voltage N224A / N3424A N223A / N3423A PRODUCT DATA 24 Vac 15%, 5/6 Hz 23 Vac 15%,
More informationInductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
More informationE-STOP relays, safety gate monitors
Unit features Safety features gang engertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
More informationContact expansion modules
Gertebild ][Bildunterschrift Kontakterweiterungen Contact for increasing the number of available contacts Approvals Zulassungen Unit features Gertemerkmale Positive-guided relay outputs: 4 safety contacts
More information2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
More informationE-STOP relays, safety gate monitors
Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Unit features Gertemerkmale Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection
More informationSeries 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
More informationHERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
More informationLEVEL GAUGES WITH MAGNETIC JOINT L 14 - L 22 - L 34
LEVEL GAUGES WITH MAGNETIC JOINT L 14 - L 22 - L 34 2 LEVEL GAUGES WITH MAGNETIC JOINT SIZE Ø 140/220/340 58 58 TYPE LA TYPE LA 14 30 S 22 33 TYPE LA 22-34 NO. HOLES Ø D2 76 O-RING CENTRE OF THE CONSERVATOR
More informationEMO T. Thermal actuator for heating, ventilation and air conditioning systems
EMO T Thermal actuator for heating, ventilation and air conditioning systems Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEEING ADVANTAGE EMO T Description The EMO T thermal
More informationTM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector
Product datasheet Characteristics TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus
More informationWaterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
More information48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
More information3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
More informationPluggable interface relays CR-P Pcb relays
2CDC 293 034 F0004 1 2 4 3 Features 9 different supply s: DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2 c/o (8 A) Cadmium-free contact
More informationI E D C E R T. Net MA N A G E ME N T S Y S T E M ISO 9001: 2000 9105.RAVI. Pendant Stations LADY Series
C E R T I F MA N A G E ME N T I E D Net ISO 9001: 2000 9105.RAVI I S Y S T E M Pendant Stations LADY Series 4.1 Pendant Stations LADY Series - LA type single-row Main Features The new LADY series single-row
More informationE-STOP relays, safety gate monitors
Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Gertemerkmale Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous
More informationE-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Gertemerkmale Positive-guided relay outputs: 3 safety contacts (N/O),
More informationZCK-E65 ZCK-Y51 ZCK-Y71 ZCK-Y61 ZCK-E09 (1) ZCK-E05 ZCK-J404H29
ZCK-E ZCK-E1 ZCK-Y ZCK-Y9 ZCK-E64 ZCK-E6 ZCK-Y1 ZCK-Y3 ZCK-E63 ZCK-Y91 ZCK-E6 ZCK-Y81 ZCK-E69 ZCK-Y71 ZCK-E67 ZCK-E9 (1) ZCK-Y61 ZCK-Y41 ZCK-Y43 ZCK-E6 ZCK-E8 ZCK-Y ZCK-Y ZCK-E619 ZCK-Y11 ZCK-E ZCK-E66
More informationMini Motor Contactor J7KNA Main contactor Accessories Approved Standards Standard Guide No (US,C) Ordering Information tage Model Number Legend gear
Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC
More informationUncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M
Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M The details make the difference MCB S 200/S 200 M A range designed to ensure efficiency and protection
More informationVEO. V4PF480Y/277VSYTK02 Art.Nr.: 2104200. V4PF480Y/277VSYTK02P Art.Nr.: 2104210 TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Temperature monitoring (PTC) Supply voltage 208-480 V AC Supply circuit = measuring circuit 2 change-over contacts Width 45 mm Control
More informationPreventa Machine Safety Products
Preventa Machine Safety Products Catalog 2009 200 Supplement Safety Relay Modules 2 Contents Preventa safety relay modules Selection guide 2 Electrical Ratings 6 Types XPSAC and XPSAXE For Emergency stop
More informationSICONT Limit Switches Type 3SE3 upto 500 VAC, 600 VDC, 10A
s SICONT Limit Switches Type 3SE3 upto 500 VAC, 600 VDC, 10A Introduction The technical and descriptive information on the function, construction and selection of the new types of 3SE3 limit switches is
More informationFerrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
More informationGlenair Military and Industrial Power and Signal Connectors
Glenair Military and Industrial Power and Signal Connectors Series ITS (And FRITS) 5015 Type Reverse Bayonet Connectors Derived from MIL-DTL-5015 and VG95234 Mating mechanism (3 reverse bayonets at 120
More informationCatalogue May 2015. EasyLine XLP Fuse Switch Disconnector 1-2-3-4 pole
Catalogue May 2015 EasyLine XLP Fuse Switch Disconnector 1-2-3-4 pole Contents Introduction 1 Overview 1-pole 2 Overview 2-pole 3 Overview 3-pole 4 Overview 4-pole 5 Electronic Fuse Monitoring 6 Busbar
More informationHL-5000. Economical, Miniature Limit Switch Boasting Rigid Construction. General-purpose Limit Switch. Model Number Structure.
General-purpose Limit Switch CSM DS_E_3_ Economical, Miniature Limit Switch Boasting Rigid Construction The Head, Box, and Cover mate with ridged surfaces to maintain strength. A unique Head structure
More information