Ceramic Component Solutions

Transcription

1 RoHS/REACH Compliance Ceramic Component Solutions AC Safety Certified High Voltage SM High Capacitance High emperature EMI Filters (X2Y ) ICC ow ES SMPS Stacks High Voltage Radials Precision Power Resistors Power Inductors Planar Array Discoidal CapStrate Custom Solutions

2 YOUR ECHNOOGY PARNER he mission of the Johanson Companies is to translate our customer needs into quality electronic components, produced in factories that are models of excellence, supported by innovative service. ith over 30 years of experience, Johanson Dielectrics provides both standard and custom technology solutions tailored to your specific electronic applications. Our standard product range includes High Voltage and AC Safety Capacitors providing solutions for ighting, I and Business Equipment designs. Our X2Y Capacitor line provides advanced EMI filtering and IC decoupling solutions and our High Capacitance anceram products provide the highest capacitance values in the smallest cases sizes. Customized solutions in the areas of High emperature and High AC power ceramic capacitors are available to customers who require a partnered technology solution. Johanson Dielectrics design and manufacturing operations are located in Sylmar, California and Zhoaqing, PRC. Our quality minded management system utilizes continuous improvement programs focused on increased product reliability, manufacturing through-put, and product performance. Our broad experience, applications support, and responsive service enhance our ability to drive down your total cost of procurement and speed your time to market. HIGH FREQUENCY CERAMIC SOUIONS Johanson echnology Inc., Camarillo CA. Products include High Q Capacitors, Ceramic and irewound Chip Inductors, and a broad range of CC based RF IPCs such as Antennas, Filters, Baluns, Couplers, Matched Filter Baluns, etc. Johanson Dielectrics, Inc. reserves the right to make design and price changes without notice. All sales are subject to the Johanson terms and conditions, including a limited warranty and remedies for nonconforming goods or defective goods. Download the Johanson terms and conditions from our website at 2

3 INDEX OF PRODUCS SURFACE MOUN CERAMIC CAPACIORS Ceramic Capacitor Prototyping Kits 4-5 High Voltage Capacitors 250-6,000 VDC 6-7 Safety Capacitors 250 VAC, Y2, Y3, Japan Standard 8-9 EMI - X2Y Filter & Decoupling Capacitors ow Inductance Capacitors 14 Chip Feedthru Filter Capacitors 15 High emperature C Capacitors High Capacitance anceram Capacitors SM Multi-layer Ceramic Capacitors VDC EADED CERAMIC CAPACIORS SMPS Stacked Capacitors, 125 C & 200 C versions Mini-SMPS Stacked Capacitors BME Mini SMPS Capacitors Switch-mode Radial eaded Capacitors High Voltage Radial eaded Capacitors, 125 C, 200 C, 250 C versions PRECISION POER RESISORS Resistor irewound Precision Resistor irewound Precision SM Resistor irewound High Power Rating Resistor irewound Chasis Mount Resistor hin Film Precision Resistor hin Film Current Sense Resistor High Power ow Inductance Resistor hick Film, High emperature Resistor Metal Element Current Sense Resistor Power hin Film POER INDUCORS Semi-shielded (Coated) PANAR CAPACIORS & CUSOM CERAMIC SOUIONS Planar Array Capacitors CAPSRAE & CUSOMER CERAMIC SOUIONS CapStrate & Customer Ceramic Solutions PAR NUMBER, DIEECRIC, PACKAGING SPECIFICAIONS Capacitor General Electrical Characteristics and PN breakdown 70 Capacitor Packaging, Power Inductor, Semi-Shielded (Coated) Packaging CERIFICAIONS & CORPORAE RESPONSIBIIY Certifications & Corporate Responsibility

4 CERAMIC CAPACIOR ENGINEERING DESIGN KIS Johanson Dielectrics, Inc. offers a variety of multi-layer chip capacitor sample kits for proto-type design work. Each kit is grouped by type, size, or voltage and contains a selection of popular values and tolerances. he chips are individually packaged in labeled plastic compartments for easy access. he general range of kit contents is described below. Specific part number details may be found at Ceramic Chip Capacitor Kit P/N: S piece sample assortment of selected values from 1.0pF to 0.22µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty VDC VDC NP0, X7R,Y5V 1.0pF to 0.22µF 50 pcs 1400 pcs 0603 Ceramic Chip Capacitor Kit P/N: S piece sample assortment of selected values from 1.0pF to 0.22µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty VDC - 16 VDC NP0, X7R,Y5V 10pF to 0.22µF 50 pcs 1400 pcs 0805 Ceramic Chip Capacitor Kit P/N: S piece sample assortment of selected values from 1.0pF to 0.47µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty VDC - 16 VDC NP0, X7R 10pF to 0.47µF 50 pcs 1400 pcs ANCERAM HIGH CAPACIANCE Ceramic Chip Capacitor Kit P/N: S-AN-X5R 500 piece sample assortment of selected values from 1.0µF to 100µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty 0402, 0603, , VDC VDC X5R 1.0µF - 100µF pcs 500 pcs 500 VDC Ceramic Chip Capacitor Kit P/N: S piece sample assortment of selected values from 33pF to 0.1µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty VDC NP0, X7R 33pF to 0.1µF pcs 400 pcs 1000 VDC Ceramic Chip Capacitor Kit P/N: S-1KV 400 piece sample assortment of selected values from 22pF to 0.1µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty VDC NP0, X7R 22pF to 0.1µF pcs 400 pcs Johanson may from time-time adjust actual kit contents based on design demand trends. Check the Johanson web site for design kit updates and kit content changes. 4

5 CERAMIC CAPACIOR ENGINEERING DESIGN KIS 2000 VDC Ceramic Chip Capacitor Kit P/N: S-2KV 300 piece sample assortment of selected values from 22pF to 0.022µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty VDC NP0, X7R 22pF to 0.022µF pcs 300 pcs X2/Y3 SAFEY CERIFIED Ceramic Chip Capacitor Kit P/N: S-SY3 240 piece sample assortment of selected values from 10pF to 1500 pf Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty KV DC / 250 AC NP0, X7R 10pF to 1500 pf 20 pcs 240 pcs X1/Y2 SAFEY CERIFIED Ceramic Chip Capacitor Kit P/N: S-SY2 200 piece sample assortment of selected values from 10pF to 2200 pf Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty KV DC / 250 AC NP0, X7R 10pF to 2200pF 20 pcs 200 pcs X2Y EMI FIER Capacitor Kit Size P/N: S-X07CBK 600 piece sample assortment of selected values from 1.0pF to 0.01µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty VDC NP0, X7R 1.0pF to 0.01µF 50 pcs 600 pcs X2Y EMI FIER Capacitor Kit Size P/N: S-X14CBK 700 piece sample assortment of selected values from 1.0pF to 0.01µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty VDC NP0, X7R 1.0pF to 0.01µF 50 pcs 700 pcs X2Y POER BYPASS Capacitor Kit Size P/N: S-X14-PBP 300 piece sample assortment of selected values from 1.0nF to 1.0µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty VDC X7R, X5R 1.0nF to 1.0µF 20 pcs 300 pcs X2Y EMI FIER Capacitor Kit Size P/N: S-X15-EMI 300 piece sample assortment of selected values from 1.0pF to 0.01µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty VDC NP0, X7R 1.0pF to 0.01µF 20 pcs 300 pcs X2Y DC MOOR FIER Capacitor Kit P/N: S-X2Y-MR 300 piece sample assortment of selected values from 0.10µF to 0.47µF Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value otal Qty VDC X7R 0.10µF to 0.47µF 30 pcs 300 pcs Johanson may from time-time adjust actual kit contents based on design demand trends. Check the Johanson web site for design kit updates and kit content changes. 5

6 HIGH VOAGE SURFACE MOUN MCCS 250-6,000 VDC hese high voltage capacitors feature a special internal electrode design which reduces voltage concentrations by distributing voltage gradients throughout the entire capacitor. his unique design also affords increased capacitance values in a given case size and voltage rating. he capacitors are designed and manufactured to the general requirement of EIA198 and are subjected to a 100% electrical testing making them well suited for a wide variety of telecommunication, commercial, and industrial applications. APPICAIONS Analog & Digital Modems ighting Ballast Circuits DC-DC Converters AN/AN Interface Voltage Multipliers Back-lighting Inverters Polyterm soft termination option for demanding environments & processes available on select parts, please contact the factory. CASE SIZE CAPACIANCE SEECION JDI /EIA R15/0805 E/B R18/1206 E/B S41/1210 E/B R29/1808 E/B RAED NP0 DIEECRIC X7R DIEECRIC INCHES (MM) VOAGE MINIMUM MAXIMUM MINIMUM MAXIMUM.080 ±.010 (2.03 ±.25) 250 VDC pf µf.050 ±.010 (1.27 ±.25) 500 VDC 10 pf 680 pf 1000 pf µf.055 Max. (1.40) 630 VDC 10 pf 560 pf 1000 pf 6800 pf.020 ±.010 (0.51±.25) 1000 VDC 10 pf 390 pf 100 pf 2700 pf.125 ± ± Max..020 ± ± ± Max..020 ± ± ± Max..020 ±.010 (3.18 ±.25) (1.57 ±.25) (1.70) (0.51±.25) (3.18 ±.25) (2.41 ±.25) (2.03) (0.51±.25) (4.70 ±.51) (2.03 ±.25) (2.16) (0.51±.25) 250 VDC pf µf 500 VDC 10 pf 1500 pf 1000 pf µf 630 VDC 10 pf 1200 pf 1000 pf µf 1000 VDC 10 pf 1000 pf 100 pf µf 2000 VDC 10 pf 220 pf 100 pf 4700 pf 3000 VDC 10 pf 82 pf 100 pf 1000 pf 250 VDC pf µf 500 VDC 10 pf 3900 pf 1000 pf µf 630 VDC 10 pf 2700 pf 1000 pf µf 1000 VDC 10 pf 1800 pf 100 pf µf 2000 VDC 10 pf 560 pf 100 pf 4700 pf 3000 VDC 10 pf 220 pf 100 pf 1000 pf 500 VDC 10 pf 4700 pf 1000 pf µf 630 VDC 10 pf 3300 pf 1000 pf µf 1000 VDC 1.0 pf 2200 pf 100 pf µf 2000 VDC 1.0 pf 820 pf 100 pf µf 3000 VDC 1.0 pf 470 pf 100 pf 3300 pf 4000 VDC 1.0 pf 180 pf 100 pf 1800 pf 5000 VDC 1.0 pf 75 pf 47 pf 390 pf 6000 VDC 1.0 pf 75 pf 47 pf 150 pf Available cap. values include these significant retma values and their multiples: ( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown. 6

7 HIGH VOAGE SURFACE MOUN MCCS 250-6,000 VDC CASE SIZE CAPACIANCE SEECION JDI /EIA S43 / 1812 S49 / 1825 S47 / 2220 S48 / 2225 E/B E/B E/B E/B RAED NP0 DIEECRIC X7R DIEECRIC INCHES (MM) VOAGE MINIMUM MAXIMUM MINIMUM MAXIMUM 250 VDC µf uf 500 VDC 100 pf 8200 pf 1000 pf uf 630 VDC 100 pf 6800 pf 1000 pf µf.177 ±.012 (4.50 ±.30) 1000 VDC 10 pf 5600 pf 1000 pf µf.125 ±.010 (3.18 ±.25) 2000 VDC 10 pf 1800 pf 100 pf µf.110 Max. (2.80).025 ±.015 (0.64±.38) 3000 VDC 10 pf 1000 pf 100 pf 4700 pf 4000 VDC 10 pf 390 pf 100 pf 1200 pf 5000 VDC 10 pf 150 pf 100 pf 820 pf 6000 VDC 10 pf 150 pf 10 pf 330 pf.180 ± ± Max..025 ± ± ± Max..025 ± ± ± Max..025 ±.015 (4.57 ±.25) (6.35 ±.25) (3.56) (0.64±.38) (5.72 ±.38) (5.08 ±.38) (3.81) (0.64±.38) (5.72 ±.25) (6.48 ±.38) (4.06) (0.64±.38) 500 VDC 100 pf µf 0.01 µf µf 630 VDC 100 pf µf 0.01 µf µf 1000 VDC 10 pf µf 1000 pf µf 2000 VDC 10 pf 5600 pf 100 pf µf 3000 VDC 10 pf 2200 pf 100 pf 8200 pf 4000 VDC 10 pf 1200 pf 100 pf 2200 pf 5000 VDC 10 pf 390 pf 100 pf 1500 pf 6000 VDC 10 pf 390 pf 100 pf 820 pf 500 VDC 1000 pf µf 0.01 µf µf 630 VDC 1000 pf µf 0.01 µf µf 1000 VDC 100 pf µf 1000 pf µf 2000 VDC 100 pf 5600 pf 1000 pf µf 3000 VDC 10 pf 2700 pf 100 pf µf 4000 VDC 10 pf 1500 pf 100 pf 2700 pf 5000 VDC 10 pf 470 pf 100 pf 1500 pf 6000 VDC 10 pf 470 pf 100 pf 820 pf 500 VDC 1000 pf µf 0.01 µf µf 630 VDC 1000 pf µf 0.01 µf µf 1000 VDC 100 pf µf 1000 pf µf 2000 VDC 100 pf 8200 pf 1000 pf µf 3000 VDC 10 pf 3300 pf 100 pf µf 4000 VDC 10 pf 1800 pf 100 pf 3300 pf 5000 VDC 10 pf 470 pf 100 pf 2700 pf 6000 VDC 10 pf 470 pf 100 pf 1200 pf Available cap. values include these significant retma values and their multiples: ( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown. EECRICA CHARACERISICS E/B Meets the standard NP0 & X7R dielectric specifications listed on page 71 DIEECRIC IHSANDING VOAGE DV = 1.5 X rated VDC for ratings VDC, DV = 1.2 X rated VDC for ratings 1,000 VDC NOE: Capacitors may require a surface coating to prevent external arcing. Solder mask should not be used beneath capacitors. For more information see JDI ech Note Surface Arc Season HO O ORDER HIGH VOAGE SURFACE MOUN P/N written: 202R18102KV4E 202 R K V 4 E VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 501 = 500 V 631 = 630 V 102 = 1000 V 202 = 2000 V 302 = 3000 V 402 = 4000 V 502 = 5000 V 602 = 6000 V R15 = 0805 R18 = 1206 R29 = 1808 S41 = 1210 S43 = 1812 S47 = 2220 S48 = 2225 S49 = 1825 N = NP0 = X7R 1st two digits are significant; third digit denotes number of zeros. 102 = 1000 pf 104 = 0.10 µf J = ± 5% K = ± 10% M = ± 20% V = NI Barrier with 100% Sn Plating (Matte) F = Polyterm flexible termination = SnPb 4 = Unmarked 6 = EIA Code E = Embossed 7 = Punched 7 No code = bulk ape specs. per EIA RS

8 AC SAFEY CAPACIORS Johanson Dielectrics ype SC ceramic chip capacitors are designed for AC voltage surge and lightning protection in lineto-ground interface applications in computer networks, modem, facsimile and other equipment. Johanson s safety capacitor offering includes four different case sizes and NP0 and X7R dielectric materials. hese devices are surface mount ready with barrier terminations and tape and reel packaging. Information on capacitor safety ratings and certification details may be found below. E/B Polyterm soft termination option for demanding environments & processes available on select parts, please contact the factory. SAFEY RAING VOAGE RAING IHSANDING VOAGE IMPUSE VOAGE CASE SIZE JOHANSON ORDERING P/N X2 250 VAC 1,500 VAC N/A R29 V3E-****-SC SANDARDS: IEC/EN :2013, EN U CERIFICAIONS: UV Rheinland R U File E X2 250 VAC 1,500 VAC N/A S43 V3E-****-SC SANDARDS: IEC/EN :2013, EN 60950:2001 CERIFICAIONS: UV Rheinland R X1/Y2 250 VAC 1,500 VAC 5,000 V R29 V3E-****-SC SANDARDS: IEC/EN :2013 U CERIFICAIONS: UV Rheinland R / U File E X1/Y2 250 VAC 1,500 VAC 5,000 V R30 V3E-****-SC SANDARDS: IEC/EN :2013 U CERIFICAIONS: UV Rheinland R U File: E X1/Y2 250 VAC 1,500 VAC 5,000 V S47 V3E-****-SC SANDARDS: IEC/EN :2013 U CERIFICAIONS: UV Rheinland R U File: E X Capacitors are defined as suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. Y Capacitors are defined as suitable for use in situations where failure of the capacitor could lead to danger of electric shock. 8

9 AC SAFEY CAPACIORS SAFEY CERIFIED R29 / 1808 X2 S43 / 1812 X2 R29 / 1808 X1/Y2 S43 / 1812 X1/Y2 R30 / 2211 X1/Y2 S47 / 2220 X1/Y2 E/B E/B E/B E/B E/B E/B INCHES.185 ± ± Max..020 ± ± ± Max..025 ± ± ± Max..012 ± ± ± Max..025 ± ± ± Max..020 ± ± ± Max..025 ±.015 (MM) (4.70 ±.38) (2.03 ±.25) (2.16) (0.51±.25) (4.45 ±.25) (3.18 ±.25) (2.92) (0.64±.38) (4.70 ±.38) (2.03 ±.38) (2.16) (0.30±.38) (4.45 ±.25) (3.18 ±.25) (2.92) (0.64±.38) 5.72 ±.40) (2.80 ±.25) (2.92) (0.51±.25) (5.72 ±.38) (5.08 ±.38) (3.81) (0.64±.38) 5 pf 10 pf 12 pf 15 pf 18 pf 22 pf 27 pf 33 pf 47 pf 56 pf 68 pf 100 pf 120 pf 150 pf 180 pf 220 pf 270 pf 330 pf 470 pf 560 pf 680 pf 1000 pf 1200 pf 1500 pf 1800 pf 2200 pf 2700 pf 3300 pf 4700 pf DIEECRIC NP0 X7R HO O ORDER AC SAFEY CAPACIORS P/N written: 302R29102MV3E- **** -SC 502 R M V 3 E - **** -SC VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING YPE 302 = 250VAC [2500V Impulse] 502 = 250VAC [5000V Impulse] R29=1808 R30=2211 S43=1812 S47=2220 AC2=2220 N = NP0 = X7R 1st two digits are significant; third digit denotes number of zeros, R = decimal. 102 = 1000 pf 104 = 0.10 µf 5R0 = 5.0pF J = ± 5% K = ± 10% M = ± 20% V = NI Barrier with 100% Sn Plating (Matte) F = Polyterm flexible termination 3 = Required Safety Mark E = Embossed 7 No code = bulk ape specs. per EIA RS481 SC = Safety Certified 9

10 X2Y FIER & DECOUPING CAPACIORS X2Y filter capacitors employ a unique, patented low inductance design featuring two balanced capacitors that are immune to temperature, voltage and aging performance differences. hese components offer superior decoupling and EMI filtering performance, virtually eliminate parasitics, and can replace multiple capacitors and inductors saving board space and reducing assembly costs. ADVANAGES One device for EMI suppression or decoupling Replace up to 7 components with one X2Y Differential and common mode attenuation Matched capacitance line to ground, both lines ow inductance due to cancellation effect APPICAIONS Amplifier Filter & Decoupling High Speed Data Filtering EMC I/O Filtering FPGA / ASIC / µ-p Decoupling DDR Memory Decoupling EMI Filtering (1 Y-Cap.) <10pF 10pF 22pF 27pF 33pF 47pF 100pF 220pF 470pF 1000pF 1500pF 2200pF 4700pF.010µF.015µF.022µF.039µF.047µF 0.10µF 0.18µF 0.22µF 0.33µF 0.40µF 0.47µF 1.0µF Power Bypass (2 Y-Caps.) <20pF 20pF 44pF 54pF 66pF 94pF 200pF 440pF 940pF 2000pF 3000pF 4400pF 9400pF.020µF.030µF.044µF.078µF.094µF 0.20µF 0.36µF 0.44µF 0.68µF 0.80µF 0.94µF 2.0µF SIZE CAP. CODE XRX (X07) NP X7R NP (X14) X7R X5R (X15) NP X7R NP0 VOAGE (X18 RAINGS X7R 6.3 = 6.3 VDC = 10 VDC 1210 (X41) X7R 16 = 16 VDC = 25 VDC 1410 (X44) X7R 50 = 50 VDC = 100 VDC 1812 (X43) X7R 500 = 500 VDC Contact factory for part combinations not shown. Filtering capacitance is specified as ine-to-ground ( erminal A or B to G) Power Bypass capacitance is specified Power-to-Ground (A + B to G) Rated voltage is from line to ground in Circuit 1, power to ground in Circuit 2. HO O ORDER X2Y CAPACIORS P/N written: 101X14102MV4 100 X M V 4 VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 6R3 = 6.3 V 100 = 10 V 160 = 16 V 250 = 25 V 500 = 50 V 101 = 100 V 501 = 500 V X07 = 0402 X14 = 0603 X15 = 0805 X18 = 1206 X41 = 1210 X44 = 1410 X43 = 1812 N = NP0 = X7R X = X5R 1st two digits are significant; third digit denotes number of zeros, R = decimal. 102 = 1000 pf 104 = 0.10 µf 5R6 = 5.6pF M = ± 20% * D = ± 0.50 pf *Values < 10 pf only V = NI Barrier with 100% in Plating (Matte) F = Polyterm flexible termination = SnPb 4 = Unmarked (Not available) E = Embossed 7 = Punched 7 No code = bulk ape specs. per EIA RS481 X2Y technology patents and registered trademark under license from X2Y AENUAORS, C 10

11 X2Y FIER & DECOUPING CAPACIORS EMI Filtering S21 Signal-to-Ground Power Bypass S21 Power-to-Ground abeled capacitance values below follow the P/N order code (single Y cap value) Effective capacitance measured in Circuit 2 is 2X of the labled single Y cap value. 10.0Ω 10.0Ω 1.00Ω 0.10Ω Approximate Impedance (Ω) 1.00Ω 0.10Ω Approximate Impedance (Ω) 0.01Ω 0.01Ω EECRICA CHARACERISICS NP0 X7R X5R EMPERAURE COEFFICIEN: 0±30ppm/ C (-55 to +125 C) ±15% (-55 to +125 C) ±15% (-55 to +85 C) Vrated 100VDC: DV = 2.5 X VDC, 25 C, 50mA max. Vrated = 500VDC: DV = 1.5 X VDC, DIEECRIC SRENGH: 25 C, 50mA max. DISSIPAION FACOR: INSUAION RESISANCE 25 C, VDC) ES CONDIIONS: OHER: 0.1% max. VDC 50 VDC: 2.5% max. VDC = 25 VDC: 3.5% max. VDC = VDC: 5.0% max. VDC = 6.3 VDC: 10% max. C 0.047µF: 1000 ΩF or 100 GΩ, whichever is less C> 0.047µF: 500 ΩF or 10 GΩ, whichever is less C > 100 pf; 1kHz ±50Hz; 1.0±0.2 VRMS 1.0±0.2 Vrms C 100 pf; 1Mhz ±50kHz; 1.0±0.2 VRMS See page 70 for additional dielectric specifications. VDC 50 VDC: 5% max. VDC 25 VDC: 10% max. CB Equivalent Circuits Cross-sectional View Dimensional View A G CB EB G1 B CASE SIZE ± ± max ± EB ± CB G2 A G B 0402 (X07) 0603 (X14) 0805 (X15) 1206 (X18) 1210 (X41) 1410 (X44) 1812 (X43) IN MM IN MM IN MM IN MM IN MM IN MM IN MM ± ± max ± ± ± ± max ± ± ± ± max ± ± ± ± max ± ± ± ± max ± ± ± ± max ± ± ± ± max ± ± ± ± max ± ± EB ± ± max ± ± ± ± max ± ± ± ± max ± ± ± ± max ± ± ± ± max ± ±

12 X2Y FIER & DECOUPING CAPACIORS HE X2Y DESIGN - A BAANCED, O ES, CAPACIOR CIRCUI he X2Y capacitor design starts with standard 2 terminal MC capacitor s opposing electrode sets, A & B, and adds a third electrode set (G) which surround each A & B electrode. he result is a highly vesatile three node capacitive circuit containing two tightly matched, low inductance capacitors in a compact, four-terminal SM chip. EMI FIERING: he X2Y component contains two shunt or line-to-ground Y capacitors. Ultra-low ES (equivalent series inductance) and tightly matched inductance of these capacitors provides unequaled high frequency Common-Mode noise filtering with low noise mode conversion. X2Y components reduce EMI emissions far better than unbalanced discrete shunt capacitors or series inductive filters. Differential signal loss is determined by the cut off frequency of the single line-to-ground (Y) capacitor value of an X2Y. POER BYPASS / DECOUPING For Power Bypass applications, X2Ys two Y capacitors are connected in parallel. his doubles the total capacitance and reduces their mounted inductance by 80% or 1/5th the mounted inductance of similar sized MC capacitors enabling high-performance bypass networks with far fewer components and vias. ow ES delivers improved High Frequency performance into the GHz range. GSM RFI AENUAION IN AUDIO & ANAOG GSM handsets transmit in the 850 and 1850 MHz bands using a DMA pulse rate of 217Hz. hese signals cause the GSM buzz heard in a wide range of audio products from headphones to concert hall PA systems or silent signal errors created in medical, industrial process control, and security applications. esting was conducted where an 840MHz GSM handset signal was delivered to the inputs of three different amplifier test circuit configurations shown below whose outputs were measured on a HF spectrum analyzer. 1) No input filter, 2 discrete MC 100nF power bypass caps. 2) 2 discrete MC 1nF input filter, 2 discrete MC 100nF power bypass caps. 3) A single X2Y 1nF input filter, a single X2Y 100nF power bypass cap. X2Y configuration provided a nearly flat response above the ambient and up to 10 db imrpoved rejection than the conventional MCC configuration. AMPIFIER INPU FIER EXAMPE In this example, a single Johanson X2Y component was used to filter noise at the input of a DC instrumentation amplifier. his reduced component count by 3-to-1 and costs by over 70% vs. conventional filter components that included 1% film Y-capacitors. Parameter X2Y Discrete Comments 10nF 10nF, 220 pf DC offset shift < 0.1 µv < 0.1 µv Referred to input Common mode rejection 91 db 92 db Source: Analog Devices, A Designer s Guide to Instrumentation Amplifiers (2nd Edition) by Charles Kitchin and ew Counts 12

13 X2Y FIER & DECOUPING CAPACIORS COMMON MODE CHOKE REPACEMEN Superior High Frequency Emissions Reduction Smaller Sizes, ighter eight No Current imitation Vibration Resistant No Saturation Concerns See our website for a detailed application note with component test comparisons and circuit emissions measurements. Measured Common Mode Rejection PARAE CAPACIOR SOUION A common design practice is to parallel decade capacitance values to extend the high frequency performance of the filter network. his causes an unintended and often over-looked effect of anti-resonant peaks in the filter networks combined impedance. X2Y s very low mounted inductance allows designers to use a single, higher value part and completely avoid the antiresonance problem. he impedance graph on right shows the combined mounted impedance of a 1nF, 10nF & 100nF 0402 MC in parrallel in RED. he MC networks anti-resonance peaks are nearly 10 times the desired impedance. A 100nF and 47nF X2Y are plotted in BUE and GREEN. (he total capacitance of X2Y (Circuit 2) is twice the value, or 200nF and 98nF in this example.) he sigle X2Y is clearly superior to the three paralleled MCs. X2Y HIGH PERFORMANCE POER BYPASS - IMPROVE PERFORMANCE, REDUCE SPACE & VIAS Actual measured performance of two high performance SerDes FPGA designs demonstrate how a 13 component X2Y bypass network significantly out performs a 38 component MC network. For more information see

14 O INDUCANCE CHIP CAPACIORS (ICC) ICC capacitors are specially designed to exhibit lower inductance by altering the aspect ratio of the terminations. he smaller current loop length results in Equivalent Series Inductance (ES) that is typically 60% lower then standard MCs of the same size. his ES improvement is extremely advantageous in the high frequency power decoupling of high speed digital MPU, FPGA, DSP, etc.. FEAURES ow Inductance High Series Resonant Frequency Sn-Pb and Polyterm ermination Options Surface Mount Small Size RoHS Compliant MC ICC CASE SIZE AVAIABE CAPACIANCE JDI EIA MM DIEECRIC 10nF 22nF 47nF 0.10uF 0.22uF 0.47uF 1.00uF 2.2uF 4.7uF 10uF B B B X7R 25V 25V 25V 16V 6.3V X5R 10V 10V 6.3V 6.3V 6.3V X7R 50V 50V 25V 25V 16V 6.3V 6.3V X5R 10V 10V 6.3V X7R 50V 50V 50V 50V 25V 16V 6.3V X5R 10V 10V 6.3V 6.3V Please visit our website for complete specifications HO O ORDER ICC CAPACIORS P/N written: 101X14102MV4 100 B14 X 224 M V 4 VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 6R3 = 6.3 V 100 = 10 V 160 = 16 V 250 = 25 V 500 = 50 V B14 = 0306 B15 = 0508 B18 = 0612 = X7R X = X5R 1st two digits are significant; third digit denotes number of zeros 103 = 0.01 µf (10NF) 104 = 0.10 µf M = ± 20% *Values < 10 pf only V = NI Barrier with 100% in Plating (Matte) = SnPb 4 = Unmarked (Not available) E = Embossed 7 = Punched 7 No code = bulk ape specs. per EIA RS

15 CHIP FIER / FEED-HRU CAPACIORS Our Feed-hru Capacitors provide excellent EMI, I/O & Power ine filtering exhibiting much lower inductance than standard SM capacitors which results in broader frequency response. hese are Precious Metal Electrode (PME) products with higher current ratings than comparable Base Metal Electrode (BME) parts. FEAURES 1 Amp Current Rating ow Inductance, High SRF Surface Mount Non-polarized Sn-Pb and Polyterm Options APPICAIONS DC Power ine EMI Filter RF Immunity FIlter RF Amplifier Gain Filter CASE SIZE AVAIABE CAPACIANCE JDI EIA MM DIEECRIC 22pF 47pF 100pF 220pF 470pF 1.0nF 2.2nF 4.7nF 10nF 22nF 47nF 100nF 220nF F F F NP0 50V 50V 50V 50V X7R 25V 25V 25V 25V 25V 25V 25V NP0 50V 50V 50V 50V 50V X7R 50V 50V 50V 50V 50V 50V 50V NP0 100V 100V 100V 100V 100V 100V X7R 50V 50V 50V 50V 50V 50V 50V Please visit our website for complete specifications HO O ORDER CHIP FIER / FEED-HRU P/N written: 250F14103YV4E 250 F Y V 4 E VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 250 = 25 V 500 = 50 V 101 = 100 V 201 = 200 V F14 = 0603 F15 = 0805 F18 = 1206 N = NP0 = X7R 1st two digits are significant; third digit denotes number of zeros. 102 = 1000 pf 103 = 0.01 µf 104 = 0.10 µf K = ± 10% M = ± 20% Y = + 50% -20% V = Ni Barrier w/ 100% Sn Plating = Ni Barrier w/ 95%Sn/5%Pb Plating 4 = Unmarked (Not available) E =Embossed 7 =Punched 7 No code = bulk ape specs. per EIA RS

16 HIGH EMPERAURE SURFACE MOUN MCCS 200 C Johanson s high temperature MCC series exhibit stable performance across an extended operating temperature range of -55 C to +200 C. Both Class I and Class II parts are available with DC voltage ratings of 50,100 and 200V satisfying a wide range of demanding applications. FEAURES APPICAIONS Stable 200 C Operation Deep Hole Drilling Electronics Compact SMD Chip High emperature Modules Polyterm ermination Option Industrial Equipment Sn-Pb ermination Option Automotive Avionics EECRICA CHARACERISICS NP0 X7R OPERAING RANGE: -55 to +200 C -55 to +200 C EMPERAURE COEFFICIEN: 0±30ppm/ C (-55to+125 C) 0±15% (-55to+125 C) 200 C CAP. DROP: -0.5% max. -45% max. DISSIPAION FACOR: (0.1%) max (2.0%) max. AGING RAE: None <1.0% per decade INSUAION RESISANCE: IHSANDING VOAGE: ES CONDIIONS: 25 C IR >100GΩ or 1000ΩF (whichever 200 C IR >1ΩF or 100MΩ is less) 2.5 X VDC for ratings 200 VDC 1.5 X VDC for ratings VDC C > 100 pf; 1kHz ±50Hz; 1.0±0.2 VRMS C 100 pf; 1Mhz ±50kHz; 1.0±0.2 VRMS X7R emp. Only X7R emp. & Rated Voltage (100%) NP0 emp. & Rated Voltage (100%) MECHANICA CHARACERISICS 07/ / /0805 E/B E/B E/B Inches (mm).040 ±.004 (1.02 ±.10).020 ±.004 (0.51 ±.10).025 Max. (0.64).008±.004 (.20±.10) Inches (mm).063 ±.008 (1.60 ±.20).032 ±.008 (0.81 ±.20).035 Max. (0.89).010±.005 (.25±.13) Inches (mm).080 ±.010 (2.03 ±.25).050 ±.010 (1.27 ±.25).055 Max. (1.40).020±.010 (0.51±.25 ) RAED NP0 DIEECRIC X7R DIEECRIC VOAGE MINIMUM MAXIMUM MINIMUM MAXIMUM 25 VDC 10 pf 270 pf 100 pf 4700 pf 50 VDC 10 pf 120 pf 100 pf 1500 pf 100 VDC 10 pf 82 pf 10 pf 390 pf 200 VDC 10 pf 50 pf 10 pf 100 pf 25 VDC 10 pf 820 pf 1000 pf µf 50 VDC 10 pf 330 pf 1000 pf µf 100 VDC 10 pf 220 pf 100 pf 2200 pf 200 VDC 10 pf 120 pf 100 pf 560 pf 25 VDC 100 pf 2200 pf 1000 pf µf 50 VDC 100 pf 1500 pf 1000 pf µf 100 VDC 100 pf 1000 pf 1000 pf µf 200 VDC 10 pf 680 pf 100 pf 2200 pf 16

17 HIGH EMPERAURE SURFACE MOUN MCCS 200 C MECHANICA CHARACERISICS 18/ / / / /2225 E/B E/B E/B E/B E/B Inches (mm).125 ±.010 (3.17 ±.25).062 ±.010 (1.57 ±.25).067 Max. (1.70).020±.010 (0.51±.25 ) Inches (mm).125 ±.010 (3.18 ±.25).095 ±.010 (2.41 ±.25).090 Max. (2.28).020±.010 (0.51±.25 ) Inches (mm).175 ±.010 (4.45 ±.25).125 ±.010 (3.17 ±.25).110 Max. (2.80).025±.015 (0.64±.38) Inches (mm).180 ±.010 (4.57 ±.25).250 ±.010 (6.35 ±.25).140 Max. (3.56).025±.015 (0.64±.38) Inches (mm).225 ±.010 (5.72 ±.25).255 ±.015 (6.48 ±.38).160 Max. (4.06).025±.015 (0.64±.38) RAED NP0 DIEECRIC X7R DIEECRIC VOAGE MINIMUM MAXIMUM MINIMUM MAXIMUM 25 VDC 100 pf 6800 pf 1000 pf µf 50 VDC 100 pf 3300 pf 1000 pf µf 100 VDC 100 pf 2200 pf 1000 pf µf 200 VDC 100 pf 1500 pf 1000 pf 5600 pf 25 VDC 1000 pf µf µf µf 50 VDC 1000 pf 5600 pf µf µf 100 VDC 100 pf 4700 pf µf µf 200 VDC 100 pf 3300 pf µf µf 25 VDC 1000 pf µf µf µf 50 VDC 1000 pf µf µf µf 100 VDC 1000 pf µf µf µf 200 VDC 1000 pf 8200 pf µf µf 25 VDC 1000 pf µf 0.10 µf µf 50 VDC 1000 pf µf 0.10 µf µf 100 VDC 1000 pf µf 0.10 µf µf 200 VDC 1000 pf µf 0.10 µf µf 25 VDC 1000 pf µf 0.10 µf µf 50 VDC 1000 pf µf 0.10 µf µf 100 VDC 1000 pf µf 0.10 µf µf 200 VDC 1000 pf µf 0.10 µf µf E/B HO O ORDER 200 C MCCS P/N written: KV4E K V 4 E VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 250 = 25 V 500 = 50 V 101 = 100 V 201 = 200 V 07 = = = = = = = = 2225 N = NP0 = X7R 1st two digits are significant; third digit denotes number of zeros. 102 = 1000 pf 103 = 0.01 µf 104 = 0.10 µf NP0 J = ± 5% K = ± 10% X7R K = ± 10% M = ± 20% V = Ni Barrier w/ 100% Sn Plating (150 C) = Ni Barrier w/ 95%Sn/5%Pb Plating (150 C) E = Ni Barrier w/ 100% Sn Plating (180 C) P = Palladium Silver Pd-Ag (200 C) 4 = Unmarked (Not available) E = Embossed 7 = Punched 7 No code = bulk ape specs. per EIA RS

18 ANCERAM CHIP CAPACIORS ANCERAM chip capacitors can replace tantalum capacitors in many applications and offer several key advantages over traditional tantalums. Because ANCERAM capacitors exhibit extremely low ESR, equivalent circuit performance can often be achieved using considerably lower capacitance values. ow DC leakage reduces current drain, extending the battery life of portable products. ANCERAM high DC breakdown voltage ratings offer improved reliability and eliminate large voltage de-rating common when designing with tantalums. ADVANAGES ow ESR Higher Surge Voltage Reduced CHIP Size Higher Insulation Resistance ow DC eakage Non-polarized Devices Improved Reliability Higher Ripple Current APPICAIONS Switching Power Supply Smoothing (Input/Output) DC/DC Converter Smoothing (Input/Output) Backlighting Inverters General Digital Circuits HO O ORDER ANCERAM Part number written: 100R15X106MV4E 100 R15 X 106 M V 4 E VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 6R3 = 6.3 V 100 = 10 V 160 = 16 V 250 = 25 V 500 = 50 V 101 = 100 V See Chart = X7R X = X5R 1st two digits are significant; third digit denotes number of zeros. 105 = 1.00 µf 476 = 47.0 µf 107 = 100 µf K = ±10% M = ±20% V = Nickel Barrier with 100% in Plating (Matte) = SnPb* (*available on select parts) 4 = Unmarked Code ype Reel E Plastic 7 Paper 7 ape specifications conform to EIA RS

19 ANCERAM CHIP CAPACIORS DIEECRIC (X7R) X (X5R) E/B CASE SIZE CAPACIANCE SEECION EIA / JDI INCHES (mm) VDC 1.0 µf 2.2 µf 3.3 µf 4.7 µf 10 µf 22 µf 47 µf 100 µf 0402 R R R R S S43 EB EB EB EB EB EB.040 ± ± Max..008 ± ± ± Max..010± ± ± Max..020± ± ± Max ± ± Max ± ± Max..035 ±.020 (1.02 ±.10) (0.51 ±.10) (0.64) (0.20±.10) (1.60 ±.20) (0.81 ±.20) (0.89) (.25±.13) (2.03 ±.25) (1.27 ±.25) (1.52) (0.51±.25 ) (3.17 ±.35) (1.57 ±.25) (1.78) ( ) (3.20 ±.40) (2.50 ±.30) (2.8) ( ) (4.50 ±.40) (3.20 ±.38) (3.55) (0.89 ±0.51) X X X X X X X X EECRICA CHARACERISICS DIEECRIC: X7R X5R EMPERAURE COEFFICIEN: ±15% (-55 to +125 C) ±15% (-55 to +85 C) DISSIPAION FACOR: For 50 VDC: 5% max. For 35 VDC: 10% max. For 50 VDC: 5% max. For 35 VDC: 10% max. INSUAION RESISANCE 25 C, VDC) DIEECRIC SRENGH: ES CONDIIONS: OHER: 100 ΩF or 10 GΩ, whichever is less 2.5 X VDC, 25 C, 50mA max. Capacitance values 10 µf: 1.0±0.2 Vrms Capacitance values > 10 µf: 0.5V±0.1 Vrms See page 70 for additional dielectric specifications. 19

20 SURFACE MOUN MCCS VDC CASE SIZE JDI Inches (mm) Voltage 0R5 XRX AVAIABE CAPACIANCE CODE R ± ± ±.001 EB.006 ±.002 (0603) (0.60 ±.03) (0.30 ±.03) (0.30 ±.03) (0.15±.05) 25V 16V 10V R ± ± Max. EB.008 ±.004 (1005) (1.02 ±.10) (0.51 ±.10) (0.64) (0.20±.10) 50V 25V 16V 10V R ± ± Max. EB.010±.005 (1608) (1.60 ±.20) (0.81 ±.20) (0.89) (.25±.13) 200V 100V 50V 25V 16V R ± ± Max. EB.020±.010 (2012) (2.03 ±.25) (1.27 ±.25) (1.27) (0.51±.25 ) 200V 100V 50V 25V 16V R ± ± Max. EB.020 ±.010 (3216) (3.17 ±.25) (1.57 ±.25) (1.27) (0.51 ±.25) 200V 100V 50V 25V S ± ± Max. EB.020 ±.010 (3224) (3.18 ±.25) (2.41 ±.25) (1.65) (0.51 ±.25) 200V 100V 50V 25V NP0 X7R X5R 16V S ± ± Max. EB.025 ±.015 (4532) (4.45 ±.25) (3.17 ±.25) (2.16) (0.64 ±.38) 200V 100V 50V 25V E/B 0R5 XRX HO O ORDER - SURFACE MOUN MCC Part number written: 100R07104KV4E 100 R K V 4 E VOAGE SERIES/SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 100 = 10 V DC 160 = 16 V DC 250 = 25 V DC 500 = 50 V DC 101 = 100 V DC 201 = 200 V DC R05 = 0201 R07 = 0402 R14 = 0603 R15 = 0805 R18 = 1206 S41 = 1210 S43 = 1812 N = NP0 = X7R X = X5R 1st two digits are significant; third digit denotes number of zeros, R = decimal. 5R6 = 5.6 pf 100 = 10 pf 102 = 1,000 pf 474 = 0.47 µf * B = ± 0.10 pf * C = ± 0.25 pf * D = ± 0.50 pf * F = ± 1 % * G = ± 2% * J = ± 5% * K = ± 10% * M = ± 20% *Values < 10 pf only V = Nickel Barrier with 100% in Plating (Matte) = SnPb 3 = Special 4 = Unmarked 6 = EIA Code* *Not available on sizes 0402 E = Embossed 7 = Punched 7 U = Embossed 13 R = Punched 13 No code = bulk ape specifications on page 48. Not all tape styles are available on all parts. 20

21 SURFACE MOUN MCCS VDC AVAIABE CAPACIANCE CODE Voltage CASE SIZE NP0 X7R X5R 25V 16V 10V 0201 R05 50V 25V 16V 10V 0402 R07 200V 100V 50V 25V 0603 R14 16V 200V See anceram High Capacitance Series for values 1.0µF 100V 50V 25V 16V 200V 100V 50V 25V 0805 R R18 200V 100V 50V 25V 1210 S41 16V 200V 100V 50V 25V 1812 S EECRICA CHARACERISICS Please refer to page 70 of the catalog or

22 SACKED SMPS CERAMIC CAPACIORS Stacked Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ES (equivalent series inductance) making them well suited for high power and high frequency applications where tantalum or aluminum electrolytic capacitors may not be suitable. he P-Series feature mechanical and pin-out configurations per DSCC and drawings while the E-Series feature mechanical and pin-out configurations more common in European design applications. KEY FEAURES P-Series Approved to DSCC Drawings & MI-PRF New -Series 200 C for downhole tools and aircraft engine control applications. E-Series Common European ead Styles available to MI-PRF requirements. NP0 & X7R Dielectrics, 50 to 500 VDC Ratings ow ESR / ow ES, Ideal for SMPS Filtering Applications Custom Sizes, Voltages, and Values Available D E B A CASE SIZE.250" MIN F.055" ± " ±.002 SRAIGH EAD.100" YP-EAD J-EAD.100" MAX.025" MIN.020" ±.002 C D E B A.050" min.070" ± " min.250" MIN.100" MAX.025" MIN.100" YP.055" ± " ±.002 F.010" ±.002 C.070" ±.010 HO O ORDER SACKED.050" SMPS min.050" min Part number written: 201P03275KJ4H 201 P K J 4 H VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 500 = 50 V 101 = 100 V 201 = 200 V 501 = 500 V See Chart N = NP0 B = BX = X7R 1st two digits are significant; third digit denotes number of zeros. 101 = 100 pf 102 = 1000 pf 103 = 0.01 µf 105 = 1.00 µf J = ±5% K= ±10% = ±15% M = ±20% N = ±30% Z = +80% -20% P = +100% -0% J = J eads (formed in) K = J eads with reduced height of.045 ±.010 = eads (formed out) M = eads with reduced height of.045 ±.010 N = Straight ead 4 = Standard 3 = Specified = ape and Reel H = High Reliability testing per customer requirements S = Special Part 22

23 SACKED SMPS CERAMIC CAPACIORS P-SERIES DSCC SYE X7R CAPACIANCE / VOAGE SEECION CASE SIZE CHIP AYERS EADS /SIDE MECHANICA SIZE RANGE (IN.) X7R MAX CAPACIANCE (µf) ENGH (D) IDH (E) MAX (B) 50V 100V 200V 500V P P P P P P P P P P P P Please refer to our website for complete offering including NP0 & BX capacitance ranges. NE 200 C -SERIES CAPACIANCE / VOAGE SEECION CASE SIZE CHIP AYERS EADS /SIDE MECHANICA SIZE RANGE (IN.) MAX CAPACIANCE (µf) ENGH (D) IDH (E) MAX (B) 50V 100V 200V Please refer to our website for complete offering including NP0 capacitance ranges. E-SERIES EUROPEAN SYE X7R CAPACIANCE / VOAGE SEECION CASE SIZE CHIP AYERS EADS /SIDE MECHANICA SIZE RANGE (MM) X7R MAX CAPACIANCE (µf) ENGH (D) IDH (E) MAX (B) 50V 100V 200V 500V E E E E E E E E E E Please refer to our website for complete offering including NP0 & BX capacitance ranges. 23

24 MINI SICH-MODE CAPACIORS JDI s Mini Switch-Mode ceramic capacitors combine the advantages of high capacitance found in tantalum capacitors with very low ESR performance of ceramic capacitors. he J and lead configurations replace 1825 and 2225 SM chips to provide stress relief and prevent cracking due to thermal cycling or mechanical board flexing. Another plus of the J-lead style is that this configuration allows use of the same solder lands as the SM chips. See the Stacked Switch-Mode section for larger values. See also the echnical Notes on soldering and handling and suggested solder lands. FEAURES High Capacitance, Small Size ow ESR/ES eadframe reduces thermal & mechanical stress due to board flexure and CE mismatch APPICAIONS DC-DC Converters Power Supply Input & Output Filters CAPACIANCE SEECION SIZE EIA CHIP NP0 Max Capacitance (uf) X7R Max Capacitance (uf) CODE SIZE 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V P P P P P P P P

25 MINI SICH-MODE CAPACIORS CASE SIZE DIMENSIONS APPICABE O A SIZES: IN. MM H ± C YP P ± h p c h p c h p c h p c DIMENSIONS APPICABE O SPECIFIC SIZES: P08 P09 P28 P29 P38 P39 P48 P49 IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM MAX MAX MAX Note: J-ead and -ead options are available on all sizes above EECRICA CHARACERISICS DIEECRIC: NP0 X7R EMPERAURE COEFFICIEN: 0 ±30ppm/ C (-55 to +125 C) ±15% (-55 to +125 C) DISSIPAION FACOR: 0.1% max. 2.5% max. AGING: None -2.5% per decade hour INSUAION RESISANCE 25 C, VDC) 1000 ΩF or 100 GΩ, whichever is less 500 ΩF or 50 GΩ, whichever is less DIEECRIC SRENGH: ES CONDIIONS: OHER: For 500V Ratings: 750VDC, 25ºC, 50mA max For 200V Ratings: 2xVDC, 25ºC, 50mA max For V Ratings: 2.5xVDC, 25ºC, 50mA max 1kHz ±50Hz;1.0±0.2 VRMS See page 70 for additional dielectric specifications. HO O ORDER - MINI SICHMODE Part number written: 500P28395KJ4U 500 P K J 4 U VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 250 = 25 V 500 = 50 V 101 = 100 V 201 = 200 V 501 = 500 V See Chart N = NP0 = X7R 1st two digits are significant; third digit denotes number of zeros. 103 = 0.01 μf 105 = 1.0 μf 106 = 10 uf J = ±5% K = ±10% M = ±20% Z = +80% -20% J = J eads (formed in) = eads (formed out) 3 = Standard 4 = Unmarked U = ape and Reel 16mm, 13 Reel NONE = Bulk pack H = High Reliability testing per customer requirements S = Special Part 25

26 BME MINI SICH-MODE CAPACIORS his new series of miniature switchmode power supply filter capacitors uses BME (Base Metal Electrode) construction to achieve % capacitance increases and component size reductions compared to their PME (Precious Metal Electrode) counterparts per the comparison examples below. BME Size / Capacitance Comparison echnology Chips Volts Max. Cap. PME 1x V 1.2µF BME 1x V 4.7µF PME 2x V 4.4µF BME 2x V 10µF FEAURES High Capacitance, Small SIze ow ESR/ES eadframe reduces thermal & mechanical stress due to board flexure and CE mismatch Green / ROHS Compliant APPICAIONS DC-DC Converters Power Supply Input & Output Filters High Capacitance Applications here Increased Reliability is Required CAPACIANCE / VOAGE CASE SIZE / PAR NUMBER CAPACIANCE DC VOAGE SIZE P0A SIZE P07 SIZE P2A SIZE P27 RAING RAING 1812 SINGE SACK 2220 SINGE SACK 1812 DOUBE SACK 2220 DOUBE SACK 2.2 µf 100V 101P0A225MJ4U+RC 4.7 µf 50V 500P0A475MJ4U+RC 4.7 µf 100V 101P07475MJ4U+RC 101P2A475MJ4U+RC 10 µf 50V 500P07106MJ4U+RC 500P2A106MJ4U+RC 10 µf 100V H 101P27106MJ4U+RC 22 µf 50V h1 500P27226MJ4U+RC Dimensions Applicable to specific sizes: Dimensions Applicable to all sizes: IN. MM H1 YP C YP P1 YP P2 ± IN. MM IN. MM IN. MM p1 IN. MM c p2 MAX: MAX: H MAX: H h1 p1 p2 c H h1 p1 p2 c H 26 h1

27 BME MINI SICH-MODE CAPACIORS YPICA APPICAION: DC-DC CONVERER INPU & OUPU FIERING Input Filter Capacitor Output Filter Capacitor Controller EECRICA CHARACERISICS OPERAING RANGE: -55 to +125 C EMPERAURE COEFFICIEN: X7R, ±15% DISSIPAION FACOR: AGING RAE: INSUAION RESISANCE: IHSANDING VOAGE: (2.0%) max. <2.5% per decade 25 C IR >100GΩ or 1000 ΩF whichever is less 2.5 X VDC for 50 VDC 2.0 X VDC for 100 VDC ES CONDIIONS: 1kHz ±50Hz; 1.0±0.2 VRMS, 25 C HO O ORDER - BME MINI SICH-MODE Part number written: 500P07106MJ4U+RC 500 P M J 4 U +RC VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING ROHS CODE 500 = 50 V 101 = 100 V See Chart = X7R 1st two digits are significant; third digit denotes number of zeros. 225 = 2.2 μf 106 = 10 uf M = ±20% J = J eads (formed in) 4 = Unmarked U = Embossed ape 13 Reel per EIA RS481 +RC = RoHS Compliant 27

28 SICH-MODE RADIA EADED CAPACIORS KEY FEAURES Rated orking Voltages from 25 to 500 VDC Rugged Epoxy Coating Offers Increased Protection Hi-Rel Screened Versions Available Custom Sizes, Voltages, and Values Available ADVANAGES Power Supplies Voltage Multipliers Data Isolation Surge Protection Industrial Control Circuits Custom Applications CASE SIZE H03 H04 H05 H06 H S D H S D H S D H S D RAED NP0 CAPACIANCE (MAX.) X7R CAPACIANCE (MAX.) IN. (MM) VOAGE VAUE CODE VAUE CODE 25 VDC.070 µf µf max. (7.62 max.).300 max. (7.62 max.) 50 VDC.060 µf µf max. (5.08 max.) 100 VDC.050 µf µf nom. (5.08 nom.) 200 VDC.040 µf µf nom. (.510 nom.) 500 VDC.020 µf µf VDC.120 µf µf max. (10.2 max.).400 max. (10.2 max.) 50 VDC.100 µf µf max. (5.08 max.) 100 VDC.082 µf µf nom. (5.08 nom.) 200 VDC.050 µf µf nom. (.510 nom.) 500 VDC.030 µf µf VDC.240 µf µf max. (12.7 max.).500 max. (12.7 max.) 50 VDC.200 µf µf max. (5.08 max.) 100 VDC.180 µf µf nom. (10.2 nom.) 200 VDC.110 µf µf nom. (.635 nom.) 500 VDC.070 µf µf VDC.750 µf µf max. (22.1 max.).600 max. (15.2 max.) 50 VDC.620 µf µf max. (5.08 max.) 100 VDC.560 µf µf nom. (20.1 nom.) 200 VDC.360 µf µf nom. (.813 nom.) 500 VDC.240 µf µf

29 SICH-MODE RADIA EADED CAPACIORS CASE SIZE H07 H08 H09 H10 H S D H S D H S D H S D RAED NP0 CAPACIANCE (MAX.) X7R CAPACIANCE (MAX.) IN. (MM) VOAGE VAUE CODE VAUE CODE 25 VDC.680 µf µf max. (27.9 max.).600 max. (15.2 max.) 50 VDC.560 µf µf max. (5.08 max.) 100 VDC.470 µf µf nom. (24.9 nom.) 200 VDC.330 µf µf nom. (.813 nom.) 500 VDC.200 µf µf VDC 1.20 µf µf max. (27.9 max.).600 max. (15.2 max.) 50 VDC 1.10 µf µf max. (8.89 max.) 100 VDC.820 µf µf nom. (24.9 nom.) 200 VDC.470 µf µf nom. (.813 nom.) 500 VDC.300 µf µf VDC.450 µf µf max. (17 max.).540 max. (13.7 max.) 50 VDC.360 µf µf max. (5.08 max.) 100 VDC.330 µf µf nom. (14.6 nom.) 200 VDC.240 µf µf nom. (.635 nom.) 500 VDC.180 µf µf VDC 1.00 µf µf max. (23.6 max.).720 max. (18.3 max.) 50 VDC.900 µf µf max. (6.35 max.) 100 VDC.750 µf µf nom. (20.3 nom.) 200 VDC.470 µf µf nom. (.813 nom.) 500 VDC.300 µf µf 585 H NOE: ead lengths are typically 1.25 for orders in bulk packaging. eads are typically 1.00 for tape and reel packaging. ape and reel packaging comes in 1000 piece reels. S Meniscus Height.050" Max HO O ORDER SICH-MODE RADIAS Part number written: 201H07105KQ4 201 H K Q 4 VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 250 = 25 V 500 = 50 V 101 = 100 V 201 = 200 V 501 = 500 V See Chart N = NP0 = X7R 1st two digits are significant; third digit denotes number of zeros. 101 = 100 pf 102 = 1000 pf 103 = 0.01 µf 105 = 1.00 µf J = ± 5% K = ± 10% M = ± 20% Z = +80% -20% Q = eaded & Encapsulated 4 = Standard 3 = Specified = ape and Reel H = High Rel esting per customer requirements S = Special Part 29

30 HIGH VOAGE RADIA EADED CAPACIORS KEY FEAURES Rated orking Voltages from 500 to 5000 VDC Rugged Epoxy Coating Offers Increased Protection Compact MC Designs Smaller han Film or Disc NE 200 C Versions Available for Oil & Geophysical ool, Aircraft Engine Control Applications DSCC Drawing & Other Screened Versions Available ADVANAGES Power Supplies Voltage Multipliers Data Isolation Surge Protection Industrial Control Circuits Custom Applications CASE SIZE H42 H47 H51 H62 H66 H S D H S D H S D H S D H S D RAED NP0 CAPACIANCE (MAX.) X7R CAPACIANCE (MAX.) IN. (MM) VOAGE VAUE CODE VAUE CODE Max Max Max ± ± Max Max Max ± ± Max Max Max ± ± Max Max Max ± ± Max Max Max ± ±.002 (6.35 Max) (5.59 Max) (6.86 Max) (4.32 ±0.76) (0.64 ±0.05) (9.40 Max) (7.62 Max) (6.86 Max) (6.99 ±0.76) (0.64 ±0.05) (12.0 Max) (10.2 Max) (8.13 Max) (9.53 ±0.76) (0.64 ±0.05) (14.5 Max) (12.7 Max) (8.13 Max) (12.1 ±0.76) (0.64 ±0.05) (17.0 Max) (15.2 Max) (8.13 Max) (14.6 ±0.76) (0.64 ±0.05) 500 VDC 4700 pf µf VDC 1500 pf µf VDC 680 pf pf VDC 330 pf pf VDC 150 pf pf VDC 100 pf pf VDC.022 µf µf VDC 3300 pf µf VDC 1500 pf µf VDC 680 pf µf VDC 330 pf pf VDC 220 pf pf VDC.056 µf µf VDC 4700 pf µf VDC 3300 pf µf VDC 1500 pf µf VDC 1000 pf µf VDC 470 pf pf VDC.100 µf µf VDC.010 µf µf VDC 6800 pf µf VDC 3300 pf µf VDC 2200 pf µf VDC 1000 pf µf VDC.150 µf µf VDC.015 µf µf VDC.010 µf µf VDC 4700 pf µf VDC 3300 pf µf VDC 2200 pf µf

31 HIGH VOAGE RADIA EADED CAPACIORS CASE SIZE H70 H72 H80 H S D H S D H S D RAED NP0 CAPACIANCE (MAX.) X7R CAPACIANCE (MAX.) IN. (MM) VOAGE VAUE CODE VAUE CODE Max Max Max ± ± Max Max Max ± ± Max Max Max ± ±.002 (19.6 Max) (18.3 Max) (8.13 Max) (17.1 ±0.76) (0.64 ±0.05) (22.1 Max) (19.1 Max) (8.13 Max) (19.7 ±0.76) (0.64 ±0.05) (36.8 Max) (18.3 Max) (8.13 Max) (34.9 ±0.76) (.064 ±0.05) 500 VDC.220 µf µf VDC.022 µf µf VDC.015 µf µf VDC 6800 pf µf VDC 4700 pf µf VDC 3300 pf µf VDC.330 µf µf VDC.100 µf µf VDC.056 µf µf VDC.033 µf µf VDC.010 µf µf VDC 6800 pf µf VDC.470 µf µf VDC.150 µf µf VDC.082 µf µf VDC.047 µf µf VDC.015 µf µf VDC.010 µf µf 683 -SERIES 200 C Johanson also offers two different series of high temperature radial leaded capacitors for 200 C. hese components feature rugged premolded cases with Hi-emp epoxy fill. he 200 C line is offered in voltage ratings of 25V to 4KV and maximum capacitance loss of -0.5% in NP0 and -45% in X7R. he line is offered in voltage ratings of 50V & 100V with maximum capacitance loss of -1.5% in NP0 and -55% in X7R. Please visit our website for complete component selection & specifications S H Meniscus Height.050" Max APPICAIONS Oil ell ogging (Downhole) Geophysical Probes Jet Engine Controls NOE: ead lengths are typically 1.25 for orders in bulk packaging. eads are typically 1.00 for tape and reel packaging. ape and reel packaging comes in 1000 piece reels. HO O ORDER HIGH VOAGE RADIAS Part number written: 102H42101KQ4 102 H K Q 4 VOAGE SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 501 = 500 V 102 = 1000 V 202 = 2000 V 302 = 3000 V 402 = 4000 V 502 = 5000 V See Chart N = NP0 = X7R 1st two digits are significant; third digit denotes number of zeros. 102 = 1000 pf 103 = 0.01 µf 105 = 1.00 µf J = ± 5% K = ± 10% M = ± 20% Z = +80% -20% Q = eaded & Encapsulated 4 = Standard 3 = Specified = ape and Reel H = High Rel esting per customer requirements S = Special Part 31

32 RESISOR IREOUND PRECISION RP SERIES KEY FEAURES emperature Coefficients of ± 2ppm/ºC emperature Range -55 C to +145 C Resistance to 6 Mega-Ohms Resistance olerance starting at ± 0.005% ong erm Stability / 100ppm/year High CR Available - Platinum & Balco ire Matched Resistance Sets to ± and ± 0.5 ppm/ºc 100% Acceptance ested Options available: ide CR Range, High Stability and Fast Rise ime PRODUC SUMMARY APPICAIONS Smart Grid Metering Power Inverters Engine Sensors emperature Sensors PRODUC SERIES (RP) RESISANCE (Ω) POER RAING () OERANCE 1 EMPERAURE COEFFICIEN EMPERAURE RANGE 1 Radial Up to 1M to ± 0.005% to 1% >100 Ω : ± 10ppm/ C 10 Ω to100 Ω : ± 20ppm/ C - 55ºC to + 145ºC Axial Up to 6M 0.06 to 2.00 <10 Ω : ± 30ppm/ C 1 See Power Derating Curve AVAIABE OPIONS (Consult Factory) Power Derating Curve ide CR Range: ow and High C 180 configurations from -20ppm/ºC to +6000ppm/ºC. 160 Down to 1ppm/ºC available. 140 High Stability: High stability version with maximum 120 resistance change of ± 20ppm/year under normal 100 conditions. 80 Fast Rise ime: ow reactance design for fast rise 60 time and extended frequency response. 40 Special esting Requirements 20 Special Pulse Requirements Ambient emperature ( C) HO O ORDER RP A01 038K0 F S RESISOR IREOUND PRECISION PACKAGE CODE, AS, VOAGE Rated Power ( % ) EMPERAURE COEFFICIEN OF RESISANCE (CR) 1% / 0.5% / 0.1% olerance 0.05% / 0.02% olerance 0.01% olerance 0.005% olerance RESISANCE OERANCE PACKING Radial = ± 10ppm/ºC 0R038 = 0.038Ω B01, 0.125, 150Vmax U = ± 20ppm/ºC 003K8 = 3.8KΩ B02, 0.250, 150Vmax S = ± 30ppm/ºC 038K0 = 38.0KΩ Axial Z = special 380K0 = 380.0KΩ A01, 0.06, 75Vmax 003M8 = 3.8MΩ A02, 0.08, 100Vmax etter denotes decimal place. See able R = decimal., K 10 3, M 10 6 Remaining 4 digits are significant or placeholders * For in/ead coated leads, add -Pb to part number Example P/N: RPA01038K0FS is Resistor irewound Precision 0.06, 75V, ±10ppm/ C 38.0KΩ, ±1.0%, bulk V = ± 0.005% = ± 0.01% Q = ± 0.02% A = ± 0.05% B = ± 0.1% F = ± 1.0% S = Bulk = ape & Reel 32

33 RESISOR IREOUND PRECISION RP SERIES RADIA Package Code B01 B02 B03 B04 Max Resistance (Ω) 500k 750k 500k 1M Max orking Voltage (V) Power Rating () Dimensions Inches [mm] AXIA idth ±0.010 [±0.25mm] Height ±0.025 [±0.64mm] ength ±0.010 [±0.25mm] ead Diameter 1 ±0.002 [±0.05mm] ead Spacing ±0.015 [±0.4mm] * Moisture Sensitivity evel: MS [3.56] [6.35] [6.86] [0.81] [3.18] [3.81] [6.86] [13.72] [0.81] [6.35] [2.59] [8.13] [7.62] [0.64] [3.81] [4.06] [13.34] [14.86] [0.81] [10.16] Radial Dimensions 1 ead ength 1.00 [25.40mm] Min Axial Dimensions 2 ead ength 1.50 [38.10mm] Min Package Code A01 A02 A03 A04 A05 A06 A07 A08 A09 A10 A11 A12 Max Resistance (Ω) 75k 150k 150k 250k 250k 400k 500k 500k 750k 750k 1M 1M Max orking Voltage (V) Power Rating () Dimensions Inches [mm] ength ±0.025 [±0.64mm] Diameter ±0.005 [±0.13mm] ead Diameter 2 ±0.002 [±0.05mm] [5.33] [2.54] [0.51] [6.60] [3.18] [0.51] [6.60] [3.18] [0.64] [9.53] [3.18] [0.51] [7.92] [3.96] [0.51] [6.35] [4.75] [0.64] [7.49] [4.75] [0.64] [6.35] [6.35] [0.64] [9.53] [4.75] [0.64] [11.43] [4.75] [0.64] [9.53] [6.35] [0.81] [9.53] [6.35] [0.64] Package Code A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 Max Resistance (Ω) 1M 1.2M 1.2M 2.5M 2.5M 3.8M 3.8M 6M 6M 6M 6M Max orking Voltage (V) Power Rating () Dimensions Inches [mm] ength ±0.025 [±0.64mm] Diameter ±0.005 [±0.13mm] ead Diameter 2 ±0.002 [±0.05mm] [11.81] [5.33] [0.64] [12.70] [6.35] [0.81] * Moisture Sensitivity evel: MS-1 his datasheet is subject to change without notice [12.70] [6.35] [0.64] [19.05] [6.35] [0.81] [19.05] [6.35] [0.64] [12.70] [9.53] [0.81] [19.05] [9.53] [0.81] [25.40] [9.53] [0.81] [25.40] [12.70] [0.81] [38.10] [12.70] [0.81] [50.80] [12.70] [0.81] 33

34 RESISOR IREOUND PRECISION SM RF SERIES KEY FEAURES Resistance from to 50kOhms Precision, Flame Proof and Pulse ithstanding olerance to ± 0.01% High Power to 4 atts Flame Resistant U 94V-0 Superior Surge Handling Capability High emperature Rating up to 275º ow emperature Coefficient to ± 20ppm/ºO Non-Inductive indings available PRODUC SUMMARY APPICAIONS Motor Control Braking Systems Power Supplies Pressure ransducers PRODUC SERIES (RF) RESISANCE RANGE (Ω) 1 POER RAING 70 ºC C to C to 3k 1 C to 15k 2 C to 25k 3 C to 50k 4 D to D to DIEECRIC SRENGH 1000 VAC 500 VAC 1 For non-inductive windings, divide max resistance by 2 OERANCE ± 0.01% to ± 5% ± 0.1% to ± 5% EMPERAURE COEFFICIEN >10 Ω : ± 20ppm/ C 1 Ω to 10 Ω : ± 50ppmºC <1 Ω : Call Factory ± 200ppm/ C Call Factory For ower 120 EMPERAURE RANGE - 55 C to C Power Derating Curve INSUAION RESISANCE >1000 MOhms / Dry Maximum orking Voltage = AVAIABE OPIONS (Consult Factory) Special esting Requirements Special Pulse Requirements Rated Power (%) HO O ORDER Ambient emperature (ºC) RF N C4 U 380R0 B E RESISOR IREOUND SM INDINGS S = Standard N = Non- Inductive PACKAGE CODE, AS, RESISANCE C1, 0.5, [0.01 to 400]Ω C2, 1.0, [0.005 to 3k]Ω C3, 2.0, [0.01 to 15k]Ω C4, 3.0, [0.01 to 25k] Ω C5, 4.0, [0.01 to 50k]Ω EMPERAURE COEFFICIEN OF RESISANCE (CR) U = ± 20ppm/ºC Q= ± 50PPM/ºC = ± 200ppm/ºC Z = special RESISANCE OERANCE PACKING 0R038 = 0.038Ω 003K8 = 3.8KΩ 038K0 = 38.0KΩ 380K0 = 380.0KΩ 003M8 = 3.8M Ω etter denotes decimal place. R = decimal., K 10 3, M 10 6 Remaining 4 digits are significant placeholders = ± 0.01% Q = ± 0.02% A = ± 0.05% B = ± 0.1% F = ± 1.0% J = ± 5.0% E = Embossed ape & Reel D1, 1.0, [0.005 to 0.05]Ω * For in/ead coated leads, D2, 2.0, [0.005 to 0.07]Ω add - Pb to part number Example P/N: RFNC4U380R0BE is Resistor irewound Precision SM Non-Inductive, 3.0, ±20ppm/ C, 380Ω, ±0.1%, embossed tape & reel 34

35 RESISOR IREOUND PRECISION SM RF SERIES MECHANICA CHARACERISICS ead hickness [.015mm] olerances ±0.002 [±0.05mm] Package Code C1 C2 C3 C4 C5 D1 D2 Dimensions Inches [mm] Stand-Off Inches [mm] Solder Pad Inches [mm] A (olerances) ±0.015 [±0.4mm] B (olerances) ±0.015 [±0.4mm] C (olerances) ±0.015 [±0.4mm] D (olerances) ±0.015 [±0.4mm] F (olerances) ±0.015 [±0.4mm] E (olerances) ±0.015 [±0.4mm] Height (olerances) ±0.005 [±0.13mm] idth (olerances) ±0.015 [±0.4mm] Height (olerances) ±0.015 [±0.4mm] ength (olerances) ±0.015 [±0.4mm] [4.83] [6.60] [11.43] [15.83] [20.83] [6.60] [11.43] 0.130[ 3.30] [3.94] [6.35] 0.270[6.86] [7.49] [3.94] [6.35] [2.79] [3.18] [4.57] [6.35] [7.75] [2.54] [2.54] [1.52] 0.070[1.78] [3.05] [3.05] [3.81] [1.78] [3.05] [1.02] [1.78] [2.54] [3.43] [4.83] [1.78] [2.54] [2.54] [3.05] [4.83] [3.81] [6.22] [3.05] [4.83] [0.13] [0.13] [0.13] [0.13] [0.13] [0.13] [0.13] [1.57] [2.44] [3.81] [5.08] [5.59] [2.44] [3.81] [2.54] [3.81] [5.08] [5.59] [6.35] [3.81] [5.08] [6.35] [8.56] [13.72] [17.78] [22.86] [8.56] [13.72] ENVIRONMENA PERFORMANCE Environmental Performance (MI-SD 202) oad ife Moisture Resistance Dielectric Storage Shock hermal Shock 5X Overload (5s) Resistance to Heat Solder (260C, 10s) DR Maximum ±1% Ω ±0.5% Ω ±0.5% Ω PACKAGING INFORMAION Package Code C1 C2 C3 C4 C5 D1 D2 Reel/ape idth [mm] Small arge Humidity Packaging Notes: Moisture Barrier Bags (MBB) are used to package surface mount components. hese bags include a dessicant and a Humidity Indicator Card to monitor humidity levels. All bags are marked with Moisture-Sensitive Identification abels. A Moisture Sensitivity evel (MS) rating of 2 (1-year floor life) applies to the Johanson RF Series. his datasheet is subject to change without notice. 35

36 RESISOR IREOUND HIGH POER RAING RH SERIES KEY FEAURES Excellent Pulse Handling Resistance olerances to ± 0.01% Resistance from 0.02 to 260kOhms MI-R-26 / MI-R Power Ratings ow CR: ± 20ppm/ ºC Standard Non-Inductive indings available APPICAIONS HDVC Systems Braking Systems Power Supplies Fluid Heater PRODUC SUMMARY PRODUC SERIES (RH) POER RAING () Miniature Axial 1 to 15 Axial 0.1 to 15 HO O ORDER DIEECRIC SRENGH 500 VAC: E01, E02, E03, E04, E05, E VAC: All Others 500 VAC: F01, F02, F03, F04, F05, F06, F VAC: All Others OERANCE ± 0.01% to ± 10% (1% Standard) EMPERAURE COEFFICIEN >10 Ω : ± 20ppm/ C 1 Ω to 10 Ω : ± 50ppm/ C <1 Ω : Call Factory EMPERAURE RANGE -55 C to C Characteristic U: -55 C to C Characteristic V: -55 C to C RH S E02 U 003K8 F S RESISOR IREOUND HIGH POER INDINGS PACKAGE CODE, AS, RESISANCE OPERAING EMPERAURE EMPERAURE COEFFICIEN OF RESISANCE (CR) RESISANCE OERANCE PACKING S = Standard N = Non- Inductive Miniature Axial E01, 1.0, 33Vmax E02, 1.0, 33Vmax Axial F01, 0.1, 8.5Vmax F02, 0.4, 20Vmax See able = -55ºC to +250ºC U = -55ºC to +275ºC V = -55ºC to +350ºC U = ± 20ppm/ C Q = ± 50ppm/ C Z = Special 0R038 = 0.038Ω 003K8 = 3.8KΩ 038K0 = 38.0KΩ 380K0 = 380.0KΩ 003M8 = 3.8MΩ etter denotes decimal place. R = decimal., K 10 3, M 10 6 Remaining 4 digits are significant or placeholders. = ± 0.01% Q= ± 0.02% A= ± 0.05% B= ± 0.1% F= ± 1.0% J= ± 5.0% K= ± 10.0% S = Bulk = ape & Reel Example P/N: RHSE02U003K8FS is Resistor irewound High Power, Standard, 1.0, 33V, -55ºC to +250ºC, ±20ppm/ºC, 3.8KΩ, ±1.0%, bulk * For in/ead coated leads, add "- Pb" to part number 36

37 RESISOR IREOUND HIGH POER RAING RH SERIES MINIAURE AXIA Package Code E01 E02 E03 E04 E05 E06 E07 E08 E09 Max Resistance (Ω) 1 3.4k 3.4k 7.5k 7.5k 10k 10k 12.5k 25k 32k Max orking Voltage (V) Power Rating () Dimensions Inches [mm] A ±0.062 [±1.57mm] B ±0.031 [±0.79mm] C 2 ±0.002 [±0.05mm] MI-R-26 / MI-R [6.35] [2.16] [0.51] R-81 RR [6.35] [2.16] [0.64] R-81 RR [7.92] [1.98] [0.51] RR [7.92] [1.98] [0.64] RR [10.31] [2.39] [0.64] R-80 RR [10.31] [2.39] [0.51] R-80 RR [8.89] [3.96] [0.81] [14.22] [4.75] [0.81] [12.70] [5.54] [1.02] Package Code E10 E11 E12 E13 Max Resistance (Ω) 1 50k 95k 150k 260k Max orking Voltage (V) Power Rating () Dimensions Inches [mm] A ±0.062 [±1.57mm] B ±0.031 [±0.79mm] C 2 ±0.002 [±0.05mm] MI-R-26 / MI-R [15.88] [6.35] [1.02] [22.23] [7.92] [1.02] R [30.99] [7.92] [1.02] 1 For non-inductive windings / divide maximum resistance by 2 2 ead Diameter: 18 AG = 0.040" / 20 AG = /22 AG = 0.025" / 24 AG = 0.020" [45.21] [9.53] [1.02] Rated Power ( % ) Power Derating Curve Ambient emperature ( C) 37

38 RESISOR IREOUND HIGH POER RAING RH SERIES AXIA Package Code F01 F02 F03 F04 F05 F06 F07 F08 F09 F10 Max Resistance (Ω) k 2.5k 7.5k 7.5k 10k 10k 12.5k 22k 22k Max orking Voltage (V) Power Rating () Dimensions Inches [mm] U V A ±0.062 [±1.57mm] B ±0.031 [±0.79mm] C 2 ±0.002 [±0.05mm] [3.81] [1.98] [0.45] [6.35] [2.39] [0.51] [6.35] [2.39] [0.64] [8.38] [2.39] [0.51] MI-R-26 / MI-R R-70 R-70 R-69 R [8.38] [2.39] [0.64] [10.31] [2.39] [0.51] [10.31] [2.39] [0.64] [8.89] [3.96] [0.81] [12.70] [4.75] [0.81] [14.22] [4.75] [0.81] Package Code F11 F12 F13 F14 F15 F16 F17 F18 F19 F20 Max Resistance (Ω) 1 40k 40k 30k 45k 45k 91k 65k 95k 150k 100k Max orking Voltage (V) Power Rating () Dimensions Inches [mm] U V A ±0.062 [±1.57mm] B ±0.031 [±0.79mm] C 2 ±0.002 [±0.05mm] [12.70] [6.35] [1.02] [12.70] [6.35] [0.81] [12.70] [5.08] [0.81] [17.15] [6.68] [1.02] [17.15] [6.68] [0.81] [22.23] [7.92] [1.02] [24.64] [6.35] [0.81] [26.04] MI-R-26 / MI-R R-74 R [7.92] [1.02] [34.93] [9.52] [1.02] [35.56] [7.92] [0.81] Package Code F21 F22 F23 Max Resistance (Ω) 1 154k 260k 320k Max orking Voltage (V) Power Rating () Dimensions Inches [mm] U V A ±0.062 [±1.57mm] B ±0.031 [±0.79mm] C 2 ±0.002 [±0.05mm] MI-R-26 / MI-R [30.99] [7.92] [1.02] [45.21] [9.52] [1.02] R [45.95] [12.95] [1.27] 1 For non-inductive windings / divide maximum resistance by 2 2 ead Diameter: 18 AG = 0.040" / 20 AG = / 22 AG = 0.025" / 24 AG = 0.020" / 25 AG = 0.018" Rated Power ( % ) Power Derating Curve CHAR U CHAR V Ambient emperature ( C) 38

39 RESISOR IREOUND HIGH POER RAING RH SERIES ENVIRONMENA PERFORMANCE Environmental Performance (MI-SD 202) DR Miniature Axial Axial - Characteristic U Axial - Characteristic V Vibration ±0.1 % Ω ±0.1% Ω ±0.2% Ω oad ife o 1% Depending on Resistance Value and Size ± 1% Ω ±3% Ω Moisture Resistance ±0.2 % Ω ±0.2% Ω ±2% Ω Dielectric ±0.2 % Ω ±0.2% Ω ±0.2% Ω Storage ±0.2 % Ω ±0.2% Ω ±2% Ω Shock ±0.1 % Ω ±0.1% Ω ±0.2% Ω hermal Shock ±0.2 % Ω ±0.2% Ω ±2% Ω 5X Overload (5s) ±0.2 % Ω ±0.2% Ω ±2% Ω CONSRUCION NOES: Centerless ground ceramic core inned copper or copperweld leads All welded terminations High emperature / trivalent / inorganic silicone coating PACKAGING INFORMAION MINIAURE AXIA: Bulk Only AXIA: Package Code F01 F02 F03 F04 F05 F06 F07 F08 F09 F10 F11 F12 F13 Bulk " Reel Bulk Only. 12" Reel No &R " Reel Package Code F14 F15 F16 F17 F18 F19 F20 F21 F22 Bulk " Reel N/A N/A N/A 500 N/A N/A N/A N/A N/A 12" Reel " Reel * Moisture Sensitivity evel: MS-1 AVAIABE OPIONS (Consult Factory) Special esting Requirements Special Pulse Requirements his datasheet is subject to change without notice. 39

40 RESISOR IREOUND CHASIS MOUN RC SERIES KEY FEAURES Resistances from to 250kOhms olerance to ± 0.01% High emperature: -55ºC to +275ºC ow CR: ± 20ppm/ ºC Power Rating 5 to 300 atts Excellent Pulse Handling Non-Inductive windings available Four erminal Versions Available (Call Factory) APPICAIONS Motor Control Braking Systems elding X-Ray PRODUC SUMMARY PRODUC SERIES (RC) RESISANCE RANGE (Ω) 1 POER RAING 25ºC) FREE AIR COMMERCIA MI DIEECRIC SRENGH G to 22K a 5 a 1500 VAC G to 47K a 10 a 1500 VAC G to 90K b 20 b 2500 VAC G to 250K c 30 c 3500 VAC OERANCE: ± 0.01 to ± 10% (1% Standard) AVAIABE OPIONS (Consult Factory) Special esting Requirements Special Pulse Requirements EMPERAURE COEFFICIEN >10 Ω: ± 20ppm/ºC 1 Ω to 10 Ω: ± 50ppm/ºC <1Ω: Call Factory EMPERAURE RANGE - 55ºC to + 275ºC 1 For non-inductive windings, divide maximum resistance by 2 a Heatsink required: [1.0] Aluminum Plate, 129 in 2 [832 cm 2] or equiv. b Heatsink required: [1.0] Aluminum Plate, 167 in 2 [1077 cm 2] or equiv. c Heatsink required: [1.5] Aluminum Plate, 291 in 2 [1877 cm 2] or equiv. d Heatsink required: [3.2] Aluminum Plate, 294in 2 [1896cm 2] or equiv. e Heatsink required: [3.2] Aluminum Plate, 895 in 2 [5780 cm 2] or equiv. HO O ORDER RC N G1 U 003K8 F S RESISOR IRE- OUND CHASIS MOUN INDINGS PACKAGE CODE, AS (COMMERCIA), RESISANCE EMPERAURE COEFFICIEN OF RESISANCE (CR) RESISANCE OERANCE PACKING S = Standard N = Non-Inductive G1, 7.5, [0.01 to 22k]Ω G2, 12.5, [0.01 to 47k]Ω G3, 25.0, [0.01 to 90k]Ω G4, 50.0, [0.01 to 250k]Ω U = ± 20ppm/ C Q = ± 50ppm/ C Z = Special 038R0 = 38Ω 003K8 = 3.8KΩ 038K0 = 38.0KΩ 380K0 = 380.0KΩ 003M8 = 3.8MΩ etter denotes decimal place. R = decimal., K 10 3, M 10 6 Remaining 4 digits are significant or placeholders. = ± 0.01% Q= ± 0.02% A= ± 0.05% B= ± 0.1% F= ± 1.0% J= ± 5.0% K= ± 10.0% S = Bulk Example P/N: RCNG1U003K8FS is Resistor irewound Chasis Mount, Non-Inductive, 7.5, ±20ppm/ºC, 3.8KΩ, ±1.0%, bulk * For in/ead coated leads, add "- Pb" to part number. 40

41 RESISOR IREOUND CHASIS MOUN RC SERIES MECHANICA CHARACERISICS Package Code G1 G2 G3 G4 Dimensions Inches [mm] A (olerances) ±0.005 [±0.13 mm] [11.28] [14.27] [18.26] [39.70] B (olerances) ±0.005 [±0.13 mm] [12.45] [15.88] [19.84] [21.44] C (olerances) ±0.031 [±0.79 mm] [15.24] [19.05] [26.97] [49.99] D (olerances) ±0.062 [±1.57 mm] [28.58] [33.53] [47.50] [70.10] E (olerances) ±0.015 [±0.38 mm] [8.48] [10.92] [13.46] [15.62] F (olerances) ±0.015 [±0.38 mm] [16.41] [20.32] [27.43] [28.96] G (olerances) ±0.015 [±0.38 mm] [8.13] [10.16] [14.22] [15.62] H (olerances) ±0.010 [±0.25 mm] [1.65] [1.91] [2.16] [2.16] J (olerances) ±0.010 [±0.25 mm] [3.56] [4.83] [6.60] [7.62] K (olerances) ±0.010 [±0.25 mm] [1.98] [2.36] [4.37] [4.98] (olerances) ±0.005 [±0.13 mm] [2.36] [2.36] [3.18] [3.18] M (olerances) ±0.015 [±0.38 mm] [1.98] [2.60] [3.18] [3.18] N (olerances) ±0.006 [±0.15 mm] [1.27] [2.03] [2.03] [2.03] O (olerances) ±0.062 [±1.57 mm] [6.76] [7.93] [11.13] [11.13] P (olerances) ±0.031 [±0.79 mm] [6.22] [7.92] [9.93] [10.72] Q (olerances) ±0.002 [±0.05 mm] [1.30] [2.49] [2.49] [2.49] R (olerances) ±0.031 [±0.79 mm] [2.16] [4.06] [4.70] [4.70] MI-R / MI-R RER-60 / RE-60 RER-65 / RE-65 RER-70 / RE-70 RER-75 / RE

42 RESISOR IREOUND CHASIS MOUN RC SERIES ENVIRONMENA PERFORMANCE Environmental Performance (MI-SD 202) Vibration oad ife Moisture Resistance Dielectric Storage Shock hermal Shock 5X Overload (5s) DR ± 0.1 % Ω ± 1% Ω ± 0.2 % Ω ± 0.2 % Ω ± 0.2 % Ω ± 0.1 % Ω ± 0.2 % Ω ± 0.2 % Ω CONSRUCION NOES: Centerless ground ceramic core inned copper or copperweld leads All welded terminations High emperature epoxy molding compound Anodized aluminum housing * Moisture Sensitivity evel: MS-1 Power Derating Curve Rated Power ( % ) G1 & G2 G3 G4 Mounted on Heatsink Free-Air Derating: G1, G2, G3, G Ambient emperature ( C) his datasheet is subject to change without notice. 42

43 RESISOR HIN FIM PRECISION RNP SERIES KEY FEAURES Resistances from 1 Ohm to 3M Ohms Resistance olerances to ± 0.01% Power Rating 0.06 to 0.75 watts CR s up to ± 5ppm/ºC Operating emperature: - 55ºC to 155ºC Available in sizes 0402,0603, 0805, 1206, 2010, 2512 APPICAIONS Motor Control Precision Scales Smart Grid Metering emperature Sensors PRODUC SUMMARY PACKAGE SIZE SANDARD POER RAING (PAGE 44) HIGH POER RAING (PAGE 45) RESISANCE RANGE (Ω) POER RAING () A 70ºC RESISANCE RANGE (Ω) POER RAING () A 70ºC K M M M M M M M M M K Power Derating Curve AVAIABE OPIONS (Consult Factory) Special esting Requirements Rated Power ( % ) HO O ORDER Ambient emperature ( C) RNP 14 H 003K8 B RESISOR HIN FIM PRECISION PACKAGE CODE POER RAING EMPERAURE COEFFICIEN OF RESISANCE (CR) RESISANCE OERANCE PACKING = = = = = = 2512 S = Standard H = High Power X = ± 5ppm/ C = ± 10ppm/ C V = ± 15ppm/ºC = ± 25ppm/ºC Q = ± 50ppmºC 038R0 = 38Ω 003K8 = 3.8KΩ 038K0 = 38.0KΩ 380K0 = 380.0KΩ 003M8 = 3.8MΩ etter denotes decimal place. R = decimal., K 10 3, M 10 6 Remaining 4 digits are significant or placeholders. = ± 0.01% A = ± 0.05% B = ± 0.1% C = ± 0.25% D = ± 0.5% F = ±1.0% = Paper ape Example P/N: RNP14H003K8BE is Resistor hin Film Precision, 0603 size, high power rating, ±10ppm/ºC, 3.8KΩ, ±0.1%, embossed tape & reel 43

44 RESISOR HIN FIM PRECISION RNP SERIES SANDARD POER RAING SPECIFICAIONS Standard Package Size Size 0402 (RNP07S) Size 0603 (RNP14S) Size 0805 (RNP15S) Max orking Voltage (V) 1 25V 50V 100V Max Overload Voltage (V) 2 50V 100V 200V Power Rating () at 70ºC CR PPM/ C ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50 ±0.01% olerance ±0.05% olerance 49.9Ω to 12KΩ Ω to 100KΩ Ω to 12KΩ 4.7Ω to 332KΩ 24.9Ω to 200KΩ - 4.7Ω to 1MΩ Resistance Range (Ω) ±0.1% olerance ±0.25% olerance ±0.5% olerance ±1% olerance 49.9Ω to 4.99KΩ 49.9Ω to 60KΩ 49.9Ω to 69.8KΩ 10Ω to 255KΩ 4.7Ω to 511KΩ 24.9Ω to 15KΩ 4.7Ω to 511KΩ 4.7Ω to 1MΩ 1Ω to 1MΩ 1Ω to 24.9Ω to 30KΩ 4.7Ω to 1MΩ 4.7Ω to 2MΩ 1Ω to 2MΩ Standard Package Size Size 1206 (RNP18S) Size 2010 (RNP19S) Size 2512 (RNP20S) Max orking Voltage (V) 1 150V 150V 150V Max Overload Voltage (V) 2 300V 300V 300V Power Rating () at 70ºC CR PPM/ C ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50 ±0.01% olerance 24.9Ω to 499KΩ Ω to 499KΩ Ω to 499KΩ - ±0.05% olerance 4.7Ω to 1MΩ 4.7Ω to 1MΩ 4.7Ω to 1MΩ Resistance Range (Ω) ±0.1% olerance ±0.25% olerance 24.9Ω to 49.9KΩ 4.7Ω to 1MΩ 4.7Ω to 2.49MΩ 24.9Ω to 100KΩ 4.7Ω to 1MΩ 4.7Ω to 3MΩ 24.9Ω to 100KΩ 4.7Ω to 1MΩ 4.7Ω to 3MΩ ±0.5% olerance 1Ω to 2.49MΩ 1Ω to 3MΩ 1Ω to 3MΩ ±1% olerance 1 orking Voltage = ( P * R ) or MAX isted, whichever is lower. 2 Overload Voltage = 2.5 * ( P * R ) or MAX isted, whichever is lower. 44

45 RESISOR HIN FIM PRECISION RNP SERIES HIGH POER RAINGS SPECIFICAIONS High Power Package Size Size 0603 (RNP14H) Size 0805 (RNP15H) Size 1206 (RNP18H) Max orking Voltage (V) 1 75V 150V 200V Max Overload Voltage (V) 2 150V 300V 400V Power Rating () at 70ºC CR PPM/ C ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50 ±0.01% olerance 24.9Ω to 100KΩ 24.9 to 200K 24.9Ω to 499KΩ ±0.05% olerance 4.7Ω to 332KΩ 4.7Ω to 511KΩ Resistance Range (Ω) ±0.1% olerance ±0.25% olerance ±0.5% olerance 24.9Ω to 15KΩ 4.7Ω to 332KΩ 4.7Ω to 1MΩ 24.9Ω to 30KΩ 4.7Ω to 511KΩ 4.7Ω to 1MΩ 4.7Ω to1 MΩ 1Ω to 1MΩ 24.9Ω to 4.7Ω to 1MΩ ±1% olerance High Power Package Size Size 2010 (RNP19H) Size 2512 (RNP20H) Max orking Voltage (V) 1 200V 200V Max Overload Voltage (V) 2 400V 400V Power Rating () at 70ºC CR PPM/ C ±5 ±10 ±15 ±25 ±50 ±10 ±15 ±25 ±50 ±0.01% olerance 24.9Ω to 499KΩ 24.9Ω to 2KΩ Resistance Range (Ω) ±0.05% olerance ±0.1% olerance ±0.25% olerance 24.9Ω to 49.9KΩ 4.7Ω to 1MΩ 4.7Ω to 2KΩ ±0.5% olerance 1Ω to 2KΩ ±1% olerance 1 orking Voltage = ( P * R ) or MAX isted, whichever is lower. 2 Overload Voltage = 2.5 * ( P * R ) or MAX isted, whichever is lower. 45

46 RESISOR HIN FIM PRECISION RNP SERIES MECHANICA CHARACERISICS Package Size (ength) Inches [mm] (idth) Inches [mm] Dimensions (hickness) Inches [mm] EB (End Band) Inches [mm] [1.02] 0.02 [0.51] [0.30] [0.18] [1.52] 0.03 [0.76] [0.46] [0.30] [2.03] 0.05 [1.27] [0.56] [0.30] [3.05] 0.06 [1.52] [0.56] [0.41] [4.83] 0.09 [2.29] [0.56] [0.58] [6.35] 0.12 [3.05] [0.56] [0.58] ENVIRONMENA CHARACERISICS est olerance <0.05% Requirement olerance >0.05% Conditions Bending Strength DR±0.05% DR±0.2% Bending amplitude 3mm for 10 seconds Resistance to Soldering Heat DR±0.05% DR±0.2% 260±5 C for 10 seconds hermal Shock DR±0.05% DR±0.25% -55 C~150 C, 100 cycles Insulation Resistance >1000 MΩ Apply 100VDC for 1 minute CR As Spec. +25/-55/+25/+125/+25 C Solderability 95% min coverage 245±5 C for 3 seconds Damp Heat ith oad oad ife ow emperature Operation Short ime Overload DR±0.05% DR±0.05% DR±0.05% DR±0.05% * Moisture Sensitivity evel: MS-1 his datasheet is subject to change without notice. DR±0.5% (For High Power Rating) >7kΩD R±0.5% DR±0.5% (For High Power Rating) DR±0.5% (For High Power Rating) DR±0.2% (For High Power Rating) DR±0.3% DR±0.2% DR±0.2% DR±0.2% 40±2 C, 90~95% R.H. Max. working voltage for 1000 hrs with 1.5 hrs ON and 0.5 hrs OFF 70±2 C, Max. working voltage for 1000 hrs with 1.5 hrs ON and 0.5 hrs OFF 1 hour, -65 C, followed by 45 minutes of RCV RCV*2.5 or Max. overload voltage for 5 seconds 46

47 RESISOR HIN FIM CURREN SENSE RNC SERIES KEY FEAURES Resistances from 0.5 mohms to 15 mohms Resistance olerances to ± 1% Customized Resistance available Power Rating up to 3 atts CR s to ± 50 ppm/ ºC Available in sizes 1206 / 2010 / 2512 APPICAIONS Engine Sensors Surge Protection Data Recorders emperature Sensors PRODUC SUMMARY PRODUC SERIES (RNC) Maximum Operating Current = HO O ORDER 1 11, 12, 13, 14, 15 mω - coating is green 2 6.5, 7, 8, 9, 10 mω at 50ppm - coating is green 3 All values contain green coating RNC 20 E N R00075 F E RESISOR HIN FIM CURREN SENSE PACKAGE CODE POER RAING () at 80ºC PACKAGE SIZE RESISANCES (mω) CR (ppm/ºc) RNC18A ± 50 ± 200 (0.5 mω) RNC19B ± 50 ± 100 (0.5 mω) 0.5, 0.75, 1, 1.5, 2, 11, 12, 13, 14, 15 ± 50 RNC20A , 6.5, 7 ± 75 4, 5, 10 ± , 3 ± , 0.75, 1, 1.5, 2, 6.5, 7, 8, 9, 10 ± 50 RNC20C , 6.5, 7 ± 75 4, 5, 10 ± , 3 ± 150 RNC20D , 4.5, 5, 6 ± , 0.75 ± 100 RNC20E , 1.5, 2, 2.5, 3, 3.5 ± 50 POER RAING, AS EMPERAURE COEFFICIEN OF RESISANCE (CR) OERANCES 1% 3% 5% EMPERAURE RANGE -55ºC to +170ºC RESISANCE OERANCE PACKING 18 = = = 2512 A = 1.0 B = 1.5 C = 2.0 D = 2.5 E = 3.0 Q = ± 50ppm/ C P = ± 75ppm/ C N = ± 100ppm/ºC M = ±150ppm/ºC = ± 200ppm/ºC R00075 = Ω (0.75mΩ) 0R0005 = Ω (0.5mΩ) 00R001 = 0.001Ω (1mΩ) 0R0015 = Ω (1.5mΩ) etter denotes decimal place. R = decimal., K 10 3, M 10 6 Remaining 5 digits are significant or placeholders. F = ± 1.0% H = ± 3.0% J = ± 5.0% E = Embossed ape & Reel Example P/N: RNC20ENR00075F is Resistor hin Film Current Sense, size 2512, 3.0, ±100ppm/ºC, Ω (0.75mΩ), ±1.0%, embossed tape & reel 47

48 RESISOR HIN FIM CURREN SENSE RNC SERIES EECRICA & MECHANICA CHARACERISICS Package Code RNC18 (Size1206) RNC19 (Size 2010) RNC20 (Size 2512) RNC20 w/green Coating (Size 2512) Power Rating () to 3 Resistance Value (Ω) (ength) [mm] (idth) [mm] (hickness) [mm] EB (End Band) [mm] ± ± ± ± ± ± ± ±0.25 1, 4, 5, ± ± ± ±0.25 2, 3, ± ± ± ±0.25 7, 8, ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ±0.25 2, 6, 7, ± ± ± ± ± ± ± ±0.25 4, ± ± ± ±0.25 9, ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ±0.25 1, 5, ± ± ± ± , 6.5, ± ± ± ±0.25 2, ± ± ± ±0.25 4, ± ± ± ± to ± ± ± ±

49 RESISOR HIN FIM CURREN SENSE RNC SERIES 120 Power Derating Curve Rated Power ( % ) Ambient emperature ( C) SPECIFICAIONS est Black Coating Specification Green Coating est Method Solderability 95% min. coverage 245 ±5 C for 3 seconds emperature Coefficient of Resistance As Spec. +25/-55/+25/+125/+25 C Dry Heat ± 1.0% ± 1.0% at +170 C for 1000 hrs oad ife ± 1.0% ± 1.0% 70 ±2 C, Max. working voltage for 1000 hrs with 1.5 hrs ON and 0.5 hrs OFF Short ime Overload ± 0.5% ± 1.0% 5x rated power for 5 seconds Resistance to Soldering Heat ± 0.5% ± 1.0% 260 ±5 C for 10 seconds hermal Shock ± 0.5% ± (0.5% Ω) -55 C ~ 150 C, 100 cycles Note: Green coating cannot be used in solder bath PACKAGING INFORMAION Package Code RNC18 (Reel Size 1206) RNC19 (Reel Size 2010) Quantity 2000 RNC20 (Reel Size 2512) ype * Moisture Sensitivity evel: MS-1 Embossed ape AVAIABE OPIONS (Consult Factory) Special esting Requirements his datasheet is subject to change without notice. 49

50 RESISOR HIGH POER O INDUCANCE RHX SERIES KEY FEAURES Resistances from 51k Ohms High Stability Film Resistance Elements Rated Power of 35, 50 and 100 atts O-220 and O-247 Housing Resistance tolerance of ± 0.1% or ± 1% ow Inductance of < 10nH for RHXH1 and RHXH2, <50nH for RHXH3 APPICAIONS Power Inverters Power Supplies Engine Sensors emperature Sensors PRODUC SUMMARY PRODUC SERIES (RHX) RESISANCE RANGE (Ω) 3 POER RAING () MIN MAX HEASINK 1 FREE AIR 2 HERMA RESISANCE RHXH K ºC/ RHXH K C/ RHXH K C/ OERANCES ± 1% ( R 0.1Ω ) ± 5% ± 1% ( R 0.1Ω ) ± 5% ± 1% ( R 0.10Ω ) ± 5% 1 Power Rating based on 25ºC Flange emperature 2 Power Rating based on 25ºC Ambient emperature 3 Contact Factory for Higher or ower Values AVAIABE OPIONS (Consult Factory) Special esting Requirements EMPERAURE COEFFICIENS: ± 50ppm/ C ( R 10Ω ) ± 100ppm/ C ( 0.1Ω R < 10Ω ) ± 250ppm/ C ( R < 0.1Ω ) HO O ORDER RHX H2 Q 038K0 F 4 RESISOR HIGH POER O INDUCANCE PACKAGE CODE EMPERAURE COEFFICIEN OF RESISANCE (CR) RESISANCE OERANCE PACKING H1, 35, O-220 H2, 50, O-220 H3, 100, O-247 Q = ± 50ppm/ C N = ± 100ppm/ºC K = ±250ppm/ºC 0R038 = 0.038Ω 003K8 = 3.8KΩ 038K0 = 38.0KΩ 380K0 = 380.0KΩ 003M8 = 3.8MΩ etter denotes decimal place. R = decimal., K 10 3, M 10 6 Remaining 4 digits are significant or placeholders. F = ± 1.0% (R 0.1Ω) J = ± 5.0% 4 = ube Example P/N: RHXH2Q038K0F4 is Resistor High Power ow Inductance, 50 O-220, ±50ppm/ºC, 38.0KΩ, ±1.0%, tube * in/ead coated leads, add "- Pb" on part number 50

51 RESISOR HIGH POER O INDUCANCE RHX SERIES ENVIRONMENA CHARACERISICS Electrical Characteristics RHXH1 & RHXH2 Values RHXH3 Value Maxiumum Current 25A - Inductance <10nH ( At the Standoff ) - Insulation Resistance >1000 Megohm >1000 Megohm Dielectric Strength 2000 VAC 2500 VAC emperature Range -55 C to +155 C -55 C to +155 C 120 Power Derating Curve Rated Power ( % ) Backplate emperature ( C) RHXH1 & RHXH2 POER RAING NOES: H1 and H2 High Power ow Inductance Resistors must be attached to a suitable heatsink. ithout a heatsink, the maximum power rating is 1. he maximum internal resistor temperature is 155 C. Use the following formula to specify an appropriate heatsink: RHXH3 POER RAING NOES: H3 High Power ow Inductance Resistors must be attached to a suitable heatsink. he maximum internal resistor temperature is 155 C. Use the following formula to specify appropriate heatsink: here: R qh = hermal Resistance of Heatsink ( C/ ) R qr = hermal Resistance of Resistor ( C/ ) MAX = Maximum emperature of Resistor ( C ) A = Ambient emperature of Heatsink ( C ) P = Power hrough Resistor ( ) 51

52 RESISOR HIGH POER O INDUCANCE RHX SERIES MECHANICA CHARACERISICS RHXH1 & RHXH2 MOUNING NOES: H1 and H2 High Power ow Inductance Resistors must be attached to a suitable heatsink. Use thermal grease to mount resistor to a clean, flat surface. Use a compression washer to provide 150 to 300 pounds ( 665 to 1330N ) of mounting force. orque mounting screw to 8 in-lbs ( 0.9 N-m ). Mounting tab is isolated from both pins. RHXH3 MOUNING NOES: H3 High Power ow Inductance Resistors must be attached to a suitable heatsink. Use thermal grease to mount resistor to a clean, flat surface. Use a compression washer to provide 150 to 300 pounds ( 665 to 1330N ) of mounting force. orque mounting screw to 8 in-lbs ( 0.9 N-m ). Back plate is isolated from both pins. ENVIRONMENA CHARACERISICS Environmental Performance RHXH1 DR RHXH2 RHXH3 est Conditions Humidity Resistance ±1% Ω 40 C, 90-95% RH, DC 0.1, 1000 hr oad ife ±1% Ω 25 C, 90 min ON, 30 min OFF, 1000 hr emperature Cycle ±0.25% Ω -55 C for 30 min, +155 C for 30 min, 1000 hr Vibration ±0.25% Ω IEC Solder Heat ±0.1% Ω +350 C, 3s * Moisture Sensitivity evel: MS-1 his datasheet is subject to change without notice. 52

53 RESISOR HICK FIM, HIGH EMPERAURE RKS SERIES KEY FEAURES Resistances from 10m to 1Ohms Resistance olerances to ± 0.25% Power Rating 0.05 to 2 atts Non-Magnetic CR s to ± 25ppm/ºC Special High emperature Version to 300ºC High Value hick Film Resistance Element Available in sizes 0420, 0603, 0805, 1206, 1210, 2512, 4020 PRODUC SUMMARY APPICAIONS Engine Sensors Surge Protection Data Recorders emperature Sensors PRODUC SERIES (RKS) SIZE POER RAING ORKING VOAGE (VAC) EMPERAURE () 1 RIMMED UNRIMMED (> 5%) RANGE 2 RKS RKS RKS RKS RKS RKS C to C (Standard Version) - 55 C to C (High emperature Version CR valid + 25 C to C ) RKS Solder Pads must have sufficient heat conduction 2 See Power Derating Curve EMPERAURE COEFFICIEN: ± 25ppm/ºC to ± 3000ppm/ºC OERANCE RANGE: ± 0.25% to ± 30% AVAIABE OPIONS (Consult Factory) Special esting Requirements Power Derating Curve Example P/N: RKS21N038M0KE is Resistor hick Film, size 4020, -55ºC to + 300ºC, ±100ppm/ºC, 38.0MΩ, ±10.0%, embossed tape & reel Rated Power ( % ) Standard High emp HO O ORDER Ambient emperature ( C) RKS 21 N 038M0 K E RESISOR HICK FIM PACKAGE CODE 07 = = = = = = = 4020 OPERAING EMPERAURE S = -55ºC to + 155ºC = -55ºC to + 300ºC EMPERAURE COEFFICIEN OF RESISANCE (CR) = ± 25ppm/ºC Q = ± 50ppm/ C N = ± 100ppm/ºC K = ± 250ppm/ºC J = ± 500ppm/ºC H = ± 1000ppm/ºC G = ± 2000ppm/ºC F = ± 3000ppm/ºC RESISANCE OERANCE PACKING 038M0= 38.0MΩ 380M0 = 380MΩ = 3.86Ω = 386Ω 0010 = 1.0Ω etter denotes decimal place. M 10 6, G 10 9, Remaining 4 digits are significant or placeholders. C = ± 0.25% D = ± 0.50% F = ± 1.0% G = ± 2.0% J = ± 5.0% K = ± 10.0% M = ± 20.0% N = ± 30.0% E = Embossed ape & Reel 53

54 RESISOR HICK FIM, HIGH EMPERAURE RKS SERIES EECRICA CHARACERISICS Package Size 0402 olerances Available ( % ) emperature Coefficients Available ( ± ppm/ C ) 2 Voltage Coefficients Available ( ppm / V ) 2 Resistance Ranges ( ) 10M - 100M >100M - 500M >500M - 1G >1G - 10G >10G - 100G >100G to 20% 50, ppm/V 5% to 20% 100, ppm/V 5% to 20% 250, ppm/V 10% to 30% 1000, ppm/V 10% to 30% 2000, ppm/V Contact Factory to 20% 50, ppm/V 2% to 20% 100, ppm/V 5% to 20% 250, ppm/V 5% to 30% 500, ppm/V 10% to 30% 2000, ppm/V Contact Factory to 20% 50, ppm/V 2% to 20% 100, ppm/V 5% to 20% 250, ppm/V 5% to 20% 500, ppm/V 10% to 30% 1000, ppm/V % to 20% 25, 50, ppm/V 2% to 20% 50, 100, ppm/V 5% to 20% 100, ppm/V 5% to 20% 500, ppm/V 10% to 30% 1000, ppm/V % to 20% 25, 50, ppm/V 2% to 20% 50, 100, ppm/V 5% to 20% 100, ppm/V 5% to 20% 250, ppm/V 5% to 20% 500, ppm/V 10% to 30% 1000, ppm/V 0.5% to 20% , 50, ppm/V 1% to 20% 25, 50, ppm/V 1% to 20% 100, ppm/V 2% to 20% 100, ppm/V 5% to 20% 250, ppm/V 10% to 30% 500, ppm/V 0.25% to 10% , 50, ppm/V 0.5% to 20% 25, 50, ppm/V 1% to 20% 25, 50, ppm/V 2% to 20% 50, ppm/V 5% to 30% 100, ppm/V 10% to 30% 500, ppm/V 1 CR in ppm/k; +25 C to +125 C; CR below standard CR (highest value) and values >100G; +25 C to +85 C 2 VCR: typical values, all negative, not for all CR values available ENVIRONMENA CHARACERISICS Specification Value Solderability 250 C, 3s Max Soldering emperature 260 C, 10s Climatic Category 55 / 155 / 56 Max DR ong erm Stability <1 G 1 G - 10 G >10 G Storage 125 C, 1000h <1% <2% <5% oad ife 70 C, 1000h <0.5% <1% <2% Maximum Voltage, 1000h <0.5% <1% <2% 54

55 RESISOR HICK FIM, HIGH EMPERAURE RKS SERIES MECHANICA CHARACERISICS Dimensions Package Size (ength) Inches [mm] (idth) Inches [mm] (hickness) Inches [mm] EB (End Band) Inches [mm] ±0.002 [ 0.95 ±0.05 ] ±0.002 [ 0.48 ±0.10 / ] ±0.002 [ 0.3 ±0.05 ] / [ / ] / [ / ] / [ / ] / [ / ] / [ / -0.1 ] / [ / ] / [ / ] / [ / ] / [ / -0.1 ] / [ / ] / [ / ] / [ / ] / [ / -0.1 ] / [ / ] / [ / ] / [ / ] ±0.008 [ 0.8 ±0.2 ] / [ / ] / [ / ] / [ / ] ±0.008 [ 0.9 ±0.2 ] / [ / ] / [ / ] / [ / ] ±0.008 [ 0.9 ±0.2 ] PACKAGING INFORMAION Bulk or Blistertape to IEC ape width 8mm / Reel Diameter 180 or 330mm Minimum quantity Bulk / 100 pieces per value (30 pieces per value for sizes 4020 and 2512) Minimum quantity ape & Reel / 500 pieces per value (Note: Except size 0402 / 1000 pieces per value) * Moisture Sensitivity evel: MS-1 his datasheet is subject to change without notice. 55

56 RESISOR MEA EEMEN CURREN SENSE RMC SERIES KEY FEAURES Resistances from to Ohms ow Inductance (<10nH) olerances to ± 1% Resistance ire CR: ± 20ppm/ºC For Current Sensing and Shunt Applications All elded Construction Economical Bare Metal Element APPICAIONS Base Station Power Inverters Current Sensing ightning Pulse Survival PRODUC SUMMARY PRODUC SERIES (RMC) POER 85ºC () RESISANCE (Ω) 1 OERANCES J , 0.01, 0.02, 0.025, 0.03, 0.04, 0.05, 0.1 ± 1% / ± 5% J , 0.01, 0.015, 0.02, 0.025, 0.03, 0.04, 0.05, 0.1 ± 1% / ± 5% J , 0.01, 0.015, 0.02, 0.025, 0.03, 0.05, 0.1 ± 1% / ± 5% 1 Contact Factory for other resistances 120 Power Derating Curve 100 AVAIABE OPIONS (Consult Factory) Special esting Requirements Rated Power ( % ) HO O ORDER Ambient emperature ( C) RMC J2 U 0R005 F S RESISOR MEA EEMEN CURREN SENSE PACKAGE CODE, AS EMPERAURE COEFFICIEN OF RESISANCE (CR) RESISANCE OERANCE PACKING J1, 1.0 J2, 3.0 J3, 5.0 U = ± 20ppm/ºC 0R005 = 0.005Ω (5mΩ) 0R025 = 0.025Ω (25mΩ) 00R05 = 0.05Ω (50mΩ) 000R1 = 0.1Ω (100mΩ) F = ± 1.0% J = ± 5.0% S = Bulk etter denotes decimal place. R = decimal., K 10 3, M 10 6 Remaining 4 digits are significant or placeholders. Example P/N: RMCJ2U0R005FS is Resistor Metal Element Current Sense, 3.0, ±20ppm/ºC, 0.005Ω, ±1.0%, bulk * For in/ead coated leads, add "- Pb" to part number 56

57 RESISOR MEA EEMEN CURREN SENSE RMC SERIES MECHANICA CHARACERISICS Package Code J1 J2 J3 H [5.08] (olerances) ±0.100" [±2.54mm] 1.0 [25.40mm] Max 1.0 [25.40mm] Max Dimensions Inches [mm] (olerances) / [+1.02 / 0.51mm] D (olerances) ±0.002 [±0.05mm] (olerances) / [+0.25 / -0.13mm] A (olerances) ±0.030 [±0.8mm] [11.43mm] [15.24mm] [20.32mm] [1.02mm] [1.02mm] [1.02mm] [1.65mm] [1.65mm] [1.65mm] [3.18mm] [3.18mm] [3.18mm] PACKAGING INFORMAION Package Code J1 J2 J3 Standard Package Quantities 250 (Bulk Only) * Moisture Sensitivity evel: MS-1 his datasheet is subject to change without notice. 57

58 RESISOR POER HIN FIM RHF SERIES KEY FEAURES Resistances from 0.01 Ohm to 51K Ohms ow Stability to 1% Resistance olerances to ± 1% CR to ± 50ppm/ºC Power Rating to 35 att Solder Reflow Secure at 260ºC / 20s O-263 Housing (D-Pak) Isolated Back Plate APPICAIONS Power Inverters Braking Systems ighting (ED) Power Supplies PRODUC RANGE SUMMARY POER RAING 1 (with heatsink) 35 RESISANCE RANGE (Ω) EMPERAURE COEFFICIEN 0.01 to Ω ± 250 ppm/ºc ± 5% OERANCE RANGE to 9.9 Ω ± 100 ppm/ºc ± 1% / ± 5% 10 to 51K Ω ± 50 ppm/ºc ± 1% OPERING EMPERAURE RANGE -55ºC to+155ºc 1 2 on simple solder pad 2 Consult factory for other tolerances not listed HO O ORDER RHF H4 Q 038K0 RESISOR POER HIN FIM PACKAGE CODE AS EMPERAURE COEFFICIEN OF RESISANCE (CR) RESISANCE OERANCE PACKING F E RHF H4, 35, O-263 Q = ± 50 ppm/ºc N = ± 100 ppm/ºc K = ±250 ppm/ºc 0R038 = 0.038Ω 003K8 = 3.8KΩ 038K0 = 38.0KΩ F = ± 1.0% J = ± 5.0% E = Embossed ape & Reel Example P/N: RHFH4Q038K0FE is Resistor Power hin, 35, ±50ppm/ºC, 38.0KΩ, ±1.0%, embossed tape & reel *For in/ead coated leads, add -Pb to part numbers 58

59 RESISOR POER HIN FIM RHF SERIES MECHANICA CHARACERISICS Dimensions Units A B C D E F G H J K mm tol. (± mm) inches tol. (± inches) SPECIFICAIONS Specifications Values Resistor Material hin Film erminals 2 Power Rating (with heatsink) 35 ( 2 on Simple Solder Pad ) Inductance 8.4 nh Resistance Range 0.01 to 0.099Ω 0.1 to 9.9Ω 10 to 51KΩ emperature Coefficient ±250 ppm/ C ±100 ppm/ C ±50 ppm/ C olerances (contact factory for other values) ± 5% ±1% / ±5% ±1% Operating emperature -55 C to 155 C hermal Resistance Rthj-c 3.3 K/ Max Operating Voltage 500V Voltage Proof 2.0kV DC Insulation Resistance Over 1,000 MΩ oad ife ±1% 90 min ON, 30 min OFF, ºC Humidity ±1% 90-95% RH, 0.1, ºC emperature Cycle ±0.25% -55ºC for 30 min, +155ºC for 30 min, 5 cycles Solder Heat ±0.1% 350ºC ±5C for 3 seconds Vibration ±0.25% IEC Moisture Sensitivity evel: MS

60 RESISOR POER HIN FIM RHF SERIES POER RAING NOES: RHF Resistors must be attached to a suitable heatsink. he maximum internal resistor temperature is 175 C. Use the following formula to specify appropriate heatsink: here: R qh = hermal Resistance of Heatsink ( K/ ) R qr = hermal Resistance of Resistor ( K/ ) MAX = Maximum emperature of Resistor ( C ) A = Ambient emperature of Heatsink ( C ) P = Power hrough Resistor ( ) Power (% Nominal) Power Derating Curve emperature of the Backplate ( C) oad life test will be necessary in actual equipment his datasheet is subject to change without notice. 60

61 POER INDUCORS, SEMI-SHIEDED (COAED) PC SERIES he Semi-shielded Power Inductor PC Series are low profile and high current power inductors. Several dimensions are offered. KEY FEAURES High Current Performance Small and ow Profile Inductors Magnetic shielding Available for automatic mounting in tape and reel package APPICAIONS DC/DC Converter Power Supplies Industrial Data Storage Devices Consumer Electronics PRODUC RANGE SUMMARY SIZE CODE INDUCANCE RANGE HO O ORDER RAED CURREN RANGE BASED ON INDUCANCE CHANGE RAED CURREN RANGE BASED ON EMPERAURE RISE DC RESISANCE RANGE OPERING EMPERURE RANGE μh A A 60 mω mω -25ºC to +120ºC μh A A 50 mω Ω μh A A 45 mω mω μh A A 28 mω mω μh A A 16 mω mω -40ºC to +125ºC μh A A 12 mω mω μh A A 15 mω mω μh A A 10 mω mω Consult Factory for values not listed in the product range ES FREQUENCY: 100KHz, 1V SORAGE EMPERAURE: -10ºC to +40ºC, humidity 30 to 70% R.H. MOISURE SENSIIVIY EVE: MS Including self-generated heat Electrical Schematic: No Polarity PC R2 M E 1 INDUCOR POER SEMI-SHIEDED SIZE CODE INDUCANCE OERANCE PACKING PC (Coated) R68 = 0.68 μh 2R2 = 2.2 μh 220 = 22 μh 221 = 220 μh See chart M = ± 20% N = ± 30% E = Embossed ape & Reel Example P/N: PC30152R2ME is semi-shielded power inductor 2.2 μh, 3015 size, ±20%, embossed tape & reel 61

62 POER INDUCORS, SEMI-SHIEDED (COAED) PC SERIES 2410 SIZE Units Inches mm max ± ±0.004 Part Number 100KHz, 1V *1 Rated Current Based *2 Rated Current Based on Inductance Change on emperature Rise DC Resistance DC Resistance olerance PC2410R68NE 0.68 μh, ±30% 2.60 A 2.50 A 60 mω ±30% PC24101R0NE 1.0 μh, ±30% 2.00 A 1.90 A 70 mω ±30% PC24101R5ME 1.5 μh, ±20% 1.50 A 1.50 A 110 mω ±20% PC24102R2ME 2.2 μh, ±20% 1.30 A 1.20 A 140 mω ±20% PC24103R3ME 3.3 μh, ±20% 1.05 A 1.00 A 220 mω ±20% PC24104R7ME 4.7 μh, ±20% 0.92 A 0.90 A 290 mω ±20% PC24106R8ME 6.8 μh, ±20% 0.75 A 0.65 A 410 mω ±20% PC ME 10.0 μh, ±20% 0.60 A 0.55 A 690 mω ±20% PC ME 15.0 μh, ±20% 0.50 A 0.45 A 1020 mω ±20% PC ME 22.0 μh, ±20% 0.40 A 0.40 A 1470 mω ±20% 3010 SIZE Part Number 2.40 ± ± Units Inches mm ±0.004 ± ±0.004 ±0.10 max Not marked Not marked 100KHz, 1V Rated Current Based *1 on Inductance Change Part Material 1 Ferrite Core Ni-Zn Ferrite 2 Copper ire Cu / P180 Grd 1 3 ermination Ag / Ni / Sn Adhesive Silicon Base Resin 4 Magnetic Powder Ni-Zn Ferrite Part Material 1 Ferrite Core Ni-Zn Ferrite 2 Copper ire Cu / P180 Grd 1 3 ermination Ag / Ni / Sn Adhesive Silicon Base Resin 4 Magnetic Powder Ni-Zn Ferrite Rated Current Based *2 on emperature Rise DC Resistance DC Resistance olerance PC30101R0NE 1.0 μh, ±30% 2.30 A 2.30 A 50 mω ±25% PC30101R2NE 1.2 μh, ±30% 1.90 A 2.10 A 62 mω ±30% PC30101R5NE 1.5 μh, ±30% 1.65 A 2.00 A 70 mω ±30% PC30102R2ME 2.2 μh, ±20% 1.30 A 1.90 A 80 mω ±20% PC30103R3ME 3.3 μh, ±20% 1.05 A 1.80 A 130 mω ±20% PC30104R7ME 4.7 μh, ±20% 0.85 A 1.70 A 175 mω ±20% PC30106R8ME 6.8 μh, ±20% 0.70 A 1.30 A 260 mω ±20% PC ME 10.0 μh, ±20% 0.60 A 0.90 A 350 mω ±20% PC ME 15.0 μh, ±20% 0.50 A 0.80 A 510 mω ±20% PC ME 22.0 μh, ±20% 0.40 A 0.70 A 780 mω ±20% PC ME 33.0 μh, ±20% 0.32 A 0.50 A 1.10 Ω ±20% PC ME 47.0 μh, ±20% 0.28 A 0.35 A 1.60 Ω ±20% PC ME μh, ±20% 0.15 A 0.18 A 5.00 Ω ±20% *1. Idc1: Based on inductance change (Δ/o: -30%) *2. Idc2: Based on temperature rise (Δ: 40ºC YP.) Notes: Inductance is measured in HP-4285A Precision CR Meter. RDC measured in DU-5011 milli ohm meter (or equivalent). 62

63 POER INDUCORS, SEMI-SHIEDED (COAED) PC SERIES 3012 SIZE Units Inches mm max ± ±0.004 Part Number 3015 SIZE 100KHz, 1V *1 Rated Current Based *2 Rated Current Based on Inductance Change on emperature Rise DC Resistance DC Resistance olerance PC30121R0NE 1.0 μh, ±30% 1.90 A 1.71 A 45 mω ±20% PC30121R5NE 1.5 μh, ±30% 1.50 A 1.60 A 55 mω ±20% PC30122R2ME 2.2 μh, ±20% 1.25 A 1.37 A 60 mω ±20% PC30122R7ME 2.7 μh, ±20% 1.20 A 1.30 A 90 mω ±20% PC30123R3ME 3.3 μh, ±20% 1.05 A 1.21 A 90 mω ±20% PC30124R7ME 4.7 μh, ±20% 0.90 A 1.06 A 150 mω ±20% PC30126R8ME 6.8 μh, ±20% 0.70 A 0.89 A 190 mω ±20% PC ME 10.0 μh, ±20% 0.60 A 0.72 A 270 mω ±20% PC ME 15.0 μh, ±20% 0.50 A 0.57 A 450 mω ±20% PC ME 22.0 μh, ±20% 0.40 A 0.50 A 550 mω ±20% PC ME 33.0 μh, ±20% 0.30 A 0.41 A 900 mω ±20% PC ME 47.0 μh, ±20% 0.23 A 0.35 A 1250 mω ±20% Part Number 3.00 ± ± Units Inches mm ±0.004 ± ±0.004 ±0.10 max Not marked Not marked 100KHz, 1V Part Material 1 Ferrite Core Ni-Zn Ferrite 2 Copper ire Cu / P180 Grd 1 3 erminals Ag / Ni / Sn *1 Rated Current Based *2 Rated Current Based on Inductance Change on emperature Rise DC Resistance DC Resistance olerance PC30151R0NE 1.0 μh, ±30% 2.30 A 2.30 A 28 mω ±30% PC30151R5NE 1.5 μh, ±30% 2.10 A 2.10 A 37 mω ±30% PC30152R2ME 2.2 μh, ±20% 1.62 A 2.00 A 58 mω ±20% PC30152R7ME 2.7 μh, ±20% 1.50 A 1.95 A 60 mω ±20% PC30153R3ME 3.3 μh, ±20% 1.35 A 1.80 A 75 mω ±20% PC30154R7ME 4.7 μh, ±20% 1.20 A 1.60 A 100 mω ±20% PC30155R6ME 5.6 μh, ±20% 1.00 A 1.40 A 120 mω ±20% PC30156R8ME 6.8 μh, ±20% 0.97 A 1.30 A 150 mω ±20% PC ME 10.0 μh, ±20% 0.80 A 1.10 A 220 mω ±20% PC ME 15.0 μh, ±20% 0.65 A 1.00 A 300 mω ±20% 4 Adhesive Magnetic Powder Silicon Base Resin Ni-Zn Ferrite Part Material 1 Ferrite Core Ni-Zn Ferrite 2 Copper ire Cu / P180 Grd 1 3 ermination Ag / Ni / Sn Adhesive Silicon Base Resin 4 Magnetic Powder Ni-Zn Ferrite *1. Idc1: Based on inductance change (Δ/o: -30%) *2. Idc2: Based on temperature rise (Δ: 40ºC YP.) Notes: Inductance is measured in HP-4285A Precision CR Meter. RDC measured in DU-5011 milli ohm meter (or equivalent). 63

64 POER INDUCORS, SEMI-SHIEDED (COAED) PC SERIES 3015 SIZE (CONINUED) Part Number 4018 SIZE 100KHz, 1V *1 Rated Current Based *2 Rated Current Based on Inductance Change on emperature Rise DC Resistance DC Resistance olerance PC ME 18.0 μh, ±20% 0.57 A 0.90 A 410 mω ±20% PC ME 22.0 μh, ±20% 0.55 A 0.80 A 475 mω ±20% PC ME 33.0 μh, ±20% 0.45 A 0.70 A 650 mω ±20% PC ME 39.0 μh, ±20% 0.40 A 0.50 A 850 mω ±20% PC ME 47.0 μh, ±20% 0.35 A 0.45 A 1100 mω ±20% PC ME 68.0 μh, ±20% 0.30 A 0.35 A 1700 mω ±20% PC ME 82.0 μh, ±20% 0.27 A 0.32 A 1900 mω ±20% PC ME μh, ±20% 0.25 A 0.30 A 2100 mω ±20% max Units Inches mm ±0.008 ± ±0.008 ±0.20 (R82-2R7) (3R3-221) Marked Part Material 1 Ferrite Core Ni-Zn Ferrite 2 Copper ire Cu / P180 Grd 1 3 ermination Ag / Ni / Sn 4 Adhesive Magnetic Powder Silicon Base Resin Ni-Zn Ferrite Part Number 100KHz, 1V *1 Rated Current Based *2 Rated Current Based on Inductance Change on emperature Rise DC Resistance DC Resistance olerance PC4018R82NE 0.82 μh, ±30% 4.20 A 4.00 A 16 mω ±30% R82 PC40181R0NE 1.0 μh, ±30% 4.70 A 3.70 A 19 mω ±30% 1R0 PC40181R2NE 1.2 μh, ±30% 4.00 A 3.50 A 21 mω ±30% 1R2 PC40181R5NE 1.5 μh, ±30% 3.50 A 3.10 A 27 mω ±30% 1R5 PC40182R2ME 2.2 μh, ±20% 3.00 A 2.90 A 37 mω ±20% 2R2 PC40182R7ME 2.7 μh, ±20% 2.40 A 2.30 A 43 mω ±20% 2R7 PC40183R3ME 3.3 μh, ±20% 2.30 A 2.20 A 55 mω ±20% 3R3 PC40184R7ME 4.7 μh, ±20% 2.00 A 1.90 A 70 mω ±20% 4R7 PC40186R8ME 6.8 μh, ±20% 1.60 A 1.50 A 98 mω ±20% 6R8 PC ME 10.0 μh, ±20% 1.40 A 1.30 A 150 mω ±20% 100 PC ME 15.0 μh, ±20% 1.10 A 1.00 A 220 mω ±20% 150 PC ME 22.0 μh, ±20% 0.95 A 0.90 A 290 mω ±20% 220 PC ME 33.0 μh, ±20% 0.75 A 0.70 A 460 mω ±20% 330 PC ME 47.0 μh, ±20% 0.62 A 0.60 A 650 mω ±20% 470 PC ME 68.0 μh, ±20% 0.50 A 0.50 A 940 mω ±20% 680 PC ME μh, ±20% 0.45 A 0.42 A 1330 mω ±20% 101 PC ME μh, ±20% 0.35 A 0.32 A 2000 mω ±20% 151 PC ME μh, ±20% 0.30 A 0.28 A 2960 mω ±20% 221 Marking *1. Idc1: Based on inductance change (Δ/o: -30%) *2. Idc2: Based on temperature rise (Δ: 40ºC YP.) Notes: Inductance is measured in HP-4285A Precision CR Meter. RDC measured in DU-5011 milli ohm meter (or equivalent). 64

65 POER INDUCORS, SEMI-SHIEDED (COAED) PC SERIES 4025 SIZE Units Inches mm max ± ±0.008 Part Number 100KHz, 1V *1 Rated Current Based *2 Rated Current Based on Inductance Change on emperature Rise DC Resistance DC Resistance olerance PC40251R0NE 1.0 μh, ±30% 3.00 A 3.00 A 12 mω ±30% 1R0 PC40251R2NE 1.2 μh, ±30% 2.75 A 2.75 A 18 mω ±30% 1R2 PC40252R2NE 2.2 μh, ±30% 2.10 A 2.10 A 22 mω ±30% 2R2 PC40253R3ME 3.3 μh, ±20% 1.60 A 1.60 A 30 mω ±20% 3R3 PC40254R7ME 4.7 μh, ±20% 1.40 A 1.40 A 40 mω ±20% 4R7 PC40256R8ME 6.8 μh, ±20% 1.20 A 1.20 A 70 mω ±20% 6R8 PC ME 10.0 μh, ±20% 0.97 A 0.97 A 85 mω ±20% 100 PC ME 15.0 μh, ±20% 0.77 A 0.77 A 120 mω ±20% 150 PC ME 22.0 μh, ±20% 0.67 A 0.67 A 195 mω ±20% 220 PC ME 33.0 μh, ±20% 0.50 A 0.50 A 305 mω ±20% 330 PC ME 47.0 μh, ±20% 0.40 A 0.40 A 495 mω ±20% 470 PC ME 68.0 μh, ±20% 0.35 A 0.35 A 710 mω ±20% 680 PC ME μh, ±20% 0.30 A 0.30 A 1000 mω ±20% 101 PC ME μh, ±20% 0.22 A 0.22 A 1600 mω ±20% 151 PC ME μh, ±20% 0.20 A 0.20 A 2300 mω ±20% SERIES Part Number 4.00 ± ± Units Inches mm ±0.008 ± ±0.008 ±0.20 max Marked Marked 100KHz, 1V *1 Rated Current Based *2 Rated Current Based on Inductance Change on emperature Rise DC Resistance DC Resistance olerance PC50401R5NE 1.5 μh, ±30% 6.00 A 3.60 A 15 mω ±20% 1R5 PC50402R2NE 2.2 μh, ±30% 4.60 A 3.50 A 17 mω ±20% 2R2 PC50403R3ME 3.3 μh, ±20% 3.80 A 3.30 A 22 mω ±20% 3R3 PC50404R7ME 4.7 μh, ±20% 3.30 A 3.10 A 29 mω ±20% 4R7 PC50406R8ME 6.8 μh, ±20% 2.60 A 2.30 A 49 mω ±20% 6R8 PC50408R2ME 8.2 μh, ±20% 2.40 A 2.20 A 54 mω ±20% 8R2 PC ME 10.0 μh, ±20% 2.30 A 2.10 A 56 mω ±20% 100 Part Material 1 Ferrite Core Ni-Zn Ferrite 2 Copper ire Cu / P180 Grd 1 3 erminals Ag / Ni / Sn 4 Adhesive Magnetic Powder Silicon Base Resin Ni-Zn Ferrite Part Material 1 Ferrite Core Ni-Zn Ferrite 2 Copper ire Cu / P180 Grd 1 3 ermination Ag / Ni / Sn Adhesive Silicon Base Resin 4 Magnetic Powder Ni-Zn Ferrite Marking Marking *1. Idc1: Based on inductance change (Δ/o: -30%) *2. Idc2: Based on temperature rise (Δ: 40ºC YP.) Notes: Inductance is measured in HP-4285A Precision CR Meter. RDC measured in DU-5011 milli ohm meter (or equivalent). 65

66 POER INDUCORS, SEMI-SHIEDED (COAED) PC SERIES 5040 SIZE (CONINUED) Part Number 100KHz, 1V *1 Rated Current Based *2 Rated Current Based on Inductance Change on emperature Rise DC Resistance DC Resistance olerance PC ME 15.0 μh, ±20% 2.00 A 1.80 A 80 mω ±20% 150 PC ME 22.0 μh, ±20% 1.60 A 1.40 A 126 mω ±20% 220 PC ME 27.0 μh, ±20% 1.40 A 1.30 A 165 mω ±20% 270 PC ME 33.0 μh, ±20% 1.30 A 1.20 A 180 mω ±20% 330 PC ME 47.0 μh, ±20% 1.10 A 0.90 A 270 mω ±20% SIZE Units Inches mm max ± ±0.008 Part Number 6.00 ± ± Marked 100KHz, 1V *1 Rated Current Based *2 Rated Current Based on Inductance Change on emperature Rise Part Material 1 Ferrite Core Ni-Zn Ferrite 2 Copper ire Cu / P180 Grd 1 3 erminals Ag / Ni / Sn Adhesive Silicon Base Resin 4 Magnetic Powder Ni-Zn Ferrite DC Resistance DC Resistance olerance PC60451R0NE 1.0 μh, ±30% 8.60 A 6.50 A 10 mω ±30% 1R0 PC60451R3NE 1.3 μh, ±30% 8.00 A 6.00 A 11mΩ ±30% 1R3 PC60451R8NE 1.8 μh, ±30% 7.00 A 5.30 A 12 mω ±30% 1R8 PC60452R2NE 2.2 μh, ±30% 6.10 A 5.00 A 13 mω ±30% 2R2 PC60453R0NE 3.0 μh, ±30% 5.00 A 4.80 A 17 mω ±30% 3R0 PC60453R3NE 3.3 μh, ±30% 4.50 A 4.50 A 17 mω ±30% 3R3 PC60454R5NE 4.5 μh, ±30% 4.30 A 3.80 A 23 mω ±30% 4R5 PC60454R7NE 4.7 μh, ±30% 4.00 A 3.70 A 23 mω ±30% 4R7 PC60455R6NE 5.6 μh, ±30% 3.80 A 3.60 A 26 mω ±30% 5R6 PC60456R3NE 6.3 μh, ±30% 3.80 A 3.60 A 26 mω ±30% 6R3 PC60456R8NE 6.8 μh, ±30% 3.60 A 3.50 A 34 mω ±30% 6R8 PC60458R2NE 8.2 μh, ±30% 3.20 A 3.10 A 41 mω ±30% 8R2 PC ME 10.0 μh, ±20% 3.10 A 3.00 A 45 mω ±20% 100 PC ME 15.0 μh, ±20% 2.30 A 2.30 A 80 mω ±20% 150 PC ME 22.0 μh, ±20% 1.90 A 1.90 A 112 mω ±20% 220 PC ME 33.0 μh, ±20% 1.50 A 1.50 A 170 mω ±20% 330 PC ME 47.0 μh, ±20% 1.30 A 1.30 A 210 mω ±20% 470 PC ME 56.0 μh, ±20% 1.20 A 1.20 A 270 mω ±20% 560 PC ME 68.0 μh, ±20% 1.00 A 1.00 A 325 mω ±20% 680 PC ME μh, ±20% 0.90 A 0.90 A 460 mω ±20% 101 PC ME μh, ±20% 0.55 A 0.50 A 920 mω ±20% 221 Marking Marking *1. Idc1: Based on inductance change (Δ/o: -30%) *2. Idc2: Based on temperature rise (Δ: 40ºC YP.) Notes: Inductance is measured in HP-4285A Precision CR Meter. RDC measured in DU-5011 milli ohm meter (or equivalent). 66

67 POER INDUCORS, SEMI-SHIEDED (COAED) PC SERIES ENVIRONMENA PERFORMANCE SPECIFICAION VIBRAION Δ/o : ±10% here shall be no mechanical damage ES PARAMEERS Solder specimen inductor on the test printed circuit board. Apply vibrations in each of the x, y and z directions for 2 house for a total of 6 hours. Frequency : 10 to 50 Hz Amplitude : 1.5mm SODERABIIY HIGH EMPERAURE RESISANCE O EMPERAURE MOISURE SORAGE SUBSRAE BENDING he metalized area must have 90% minimum solder coverage. Δ/o : ±10% here shall be no mechanical damage or electrical damage. Δ/o : ±10% here shall be no mechanical damage or electrical damage. Δ/o : ±10% here shall be no mechanical damage Δ/o : ±10% here shall be no mechanical damage or electrical damage Dip pads in flux and dip in solder pot (NP303) at 240ºC ±5ºC he sample shall be left for 96 hours in an atmosphere with a temperature of 85±2ºC and a normal humidity. Upon completion of the test, the measurement shall be made after the sample has been left in a normal temperature and normal humidity for 1 hour. he sample shall be left for 96 hours in an atmosphere with a temperature of 30±2ºC. Upon completion of the test, the measurement shall be made after the sample has been left in a normal temperature and normal humidity for 1 hour. he sample shall be left for 96 hours in a temperature of 40±2ºC and a humidity(rh) of 90~95%. Upon completion of the test, the measurement shall be made after the sample has been left in a normal temperature and normal humidity more than 1 hour. he sample shall be soldered onto the printed circuit board and a load applied until the figure in the arrow direction is made approximately 3mm (keep time 5 ±1 seconds). HERMA SHOCK Δ/o : ±10% here shall be no damage or problems. he sample shall be subject to 5 continous cycles, such as shown in the following temperature cycle. Measure the test items after leaving the inductors at room temperature and humidity for 1 hour. COMPONEN ADHESION (PUSH ES) 10N Min (PC 2410, 3010) 12N Min (PC 3012, 3015, 4018, 4025, 5040, 6045) he device should be reflow soldered (245 ±5ºC for 10 seconds) to a copper substrate a dynamometer force gauge should be applied to the side of the component the device must withstand a minimum force of 10N or 12N without failure of the termination attached to the component. 67

68 POER INDUCORS, SEMI-SHIEDED (COAED) PC SERIES SODERING INFORMAION RECOMMENDED FOOPRIN: SIZE CODES Dimensions Units A In mm B In mm C In mm RECOMMENDED SODER AACHMEN: REFO SODERING Reflow: 2 times max Peak emperature: 255ºC Max ime Above 217ºC: 90 sec max If hand soldering must be used, follow these precautions: Use solder iron of less than 30 when soldering. Do not allow soldering iron tip to directly touch the ferrite body outside of the terminal electrode. 2 seconds maximum at 280ºC. * his datasheet is subject to change without notice 68

69 POER INDUCORS, MODED PM SERIES he Molded Power PM Series are low profile, surface-mount inductors. hey are designed for power applications or high current applications. KEY FEAURES High reliability and easy surface mount assembly ow loss due to design of low DC resistance ow profile with max thickness 3.0 mm Frequency Application Up to 3MHz Suitable for reflow soldering 100% ead Free APPICAIONS ow profile and high current power supplies DC/DC Converters PRODUC RANGE SUMMARY SIZE CODE INDUCANCE RANGE RAED CURREN RANGE BASED ON INDUCANCE CHANGE RAED CURREN RANGE BASED ON EMPERAURE RISE DC RESISANCE RANGE (YPICA) μh A A mω mω μh A A mω mω μh A A 3.50 mω mω Consult Factory for values not listed in the product range OPERING EMPERAURE RANGE -55ºC to+125ºc HO O ORDER PM 0520 R 1R0 M E INDUCOR POER MODED SIZE CODE APPICAION YPE INDUCANCE OERANCE PACKING PM (Molded) R = Power application with lower DC resistance and lower power loss design requirement HI = High performance application with high saturation current requirement 1R0 = 1.00 μh See chart M = ± 20% E = Embossed ape & Reel Example P/N: PM0520R1R0ME is molded power inductor, size 0520 for low power applications, 1.00μH, ±20%, embossed tape & reel 69

70 POER INDUCORS, MODED PM SERIES 0520 SIZE Units Inches mm ± ± ± ± 0.20 H ± ± 0.10 A ± ± 0.40 A ± ± 0.10 B ± ± 0.30 B ± ± 0.20 Part Number Inductance *1 *2 Rated Current Based Rated Current Based on Inductance Change on emperature Rise SRF (yp) DC Resistance yp Max Marking PM0520R1R0ME 1.00 μh, ±20% 8.00 A 7.50 A 65 MHz 16.8 mω 18.5 mω R 1R0 PM0520R1R5ME 1.50 μh, ±20% 6.80 A 5.80 A 46 MHz 19.0 mω 24.0 mω R 1R5 PM0520R2R2ME 2.20 μh, ±20% 5.00 A 5.50 A 38 MHz 33.0 mω 36.0 mω R 2R2 PM0520R3R3ME 3.30 μh, ±20% 4.20 A 4.50 A 34 MHz 45.0 mω 50.0 mω R 3R3 PM0520R4R7ME 4.70 μh, ±20% 3.70 A 3.70 A 27 MHz 52.0 mω 58.0 mω R 4R7 PM0520R5R6ME 5.60 μh, ±20% 3.30 A 3.50 A 22 MHz 65.0 mω 75.0 mω R 5R6 PM0520R100ME μh, ±20% 2.10 A 3.00 A 17 MHz mω mω R 100 PM0520HI100ME μh, ±20% 4.00 A 2.30 A 16 MHz mω mω SIZE Units Inches mm ± ± ± ± 0.20 H (max) A ± ± 0.40 A ± ± 0.10 B ± ± 0.30 B ± ± 0.20 Part Number Inductance Marked Marked *1 *2 Rated Current Based Rated Current Based on Inductance Change on emperature Rise SRF (yp) Application ype R HI DC Resistance PM0530HIR60ME 0.60 μh, ±20% A 9.80 A 84 MHz 11.0 mω 12.0 mω R60 PM0530HIR68ME 0.68 μh, ±20% A 9.50 A 63 MHz 11.0 mω 12.0 mω R68 PM0530HIR82ME 0.82 μh, ±20% A 9.00 A 53 MHz 14.0 mω 15.0 mω R82 yp Application Max Marking PM0530HI1R0ME 1.00 μh, ±20% A 7.00 A 52 MHz 13.0 mω 14.0 mω 1R0 PM0530HI1R2ME 1.20 μh, ±20% A 6.80 A 48 MHz 15.5 mω 16.5 mω 1R2 PM0530HI1R5ME 1.50 μh, ±20% A 6.00 A 44 MHz 20.0 mω 25.0 mω 1R5 PM0530HI2R2ME 2.20 μh, ±20% 9.00 A 5.50 A 30 MHz 29.0 mω 35.0 mω 2R2 R 1R0 1R0 Marking PM0530R1R5ME 1.50 μh, ±20% 7.00 A 8.00 A 44 MHz mω 20.0 mω R 1R5 ype R HI Marking R 1R0 1R0 *1. Isat: Based on inductance change (Δ/o: -20% YP.) *2. Irms: Based on temperature rise (Δ: 40ºC YP.) Notes: Inductance is measured in HP-4284A Precision CR Meter. RDC measured in HP 4338B milliohm meter ( or equivalent) 70

71 POER INDUCORS, MODED PM SERIES 0530 SIZE (CONINUED) Part Number 0630 SIZE Units Inches mm ± ± ± ± 0.20 H (max) A ± ± 0.40 A ± ± 0.10 B ± ± 0.30 B ± ± 0.20 Part Number Inductance Inductance *1 *2 Rated Current Based Rated Current Based on Inductance Change on emperature Rise *1 *2 Rated Current Based Rated Current Based on Inductance Change on emperature Rise SRF (yp) DC Resistance yp Application Max Marking PM0630RR47ME 0.47 μh, ±20% A A 79 MHz 3.5 mω 4.1 mω R R47 PM0630RR56ME 0.56 μh, ±20% A A 61 MHz 4.7 mω 5.0 mω R R56 PM0630RR68ME 0.68 μh, ±20% A A 68 MHz 6.0 mω 6.5 mω R R68 PM0630RR82ME 0.82 μh, ±20% A A 49 MHz 7.0 mω 7.5 mω R R82 PM0630R1R0ME 1.00 μh, ±20% A A 52 MHz 8.5 mω 9.0 mω R 1R0 PM0630R1R5ME 1.50 μh, ±20% A A 30 MHz 10.5 mω 12.0 mω R 1R5 PM0630R2R2ME 2.20 μh, ±20% A 8.00 A 30 MHz 16.0 mω 18.5 mω R 2R2 PM0630R3R3ME 3.30 μh, ±20% A 6.50 A 24 MHz 25.0 mω 28.0 mω R 3R3 PM0630R4R7ME 4.70 μh, ±20% 6.50 A 5.50 A 19 MHz 32.5 mω 35.0 mω R 4R7 PM0630R5R6ME 5.60 μh, ±20% 5.00 A 6.00 A 17 MHz 32.5 mω 35.5 mω R 5R6 PM0630R6R8ME 6.80 μh, ±20% 6.00 A 4.50 A 16 MHz 54.0 mω 60.0 mω R 6R8 PM0630R100ME μh, ±20% 5.50 A 4.00 A 13 MHz 62.0 mω 68.0 mω R 100 PM0630R150ME μh, ±20% 5.00 A 3.00 A 12 MHz mω mω R 150 PM0630R220ME μh, ±20% 2.50 A 2.50 A 8 MHz mω mω R 220 PM0630HI1R0ME 1.00 μh, ±20% A A 40 MHz 9.0 mω 10.00mΩ 1R0 PM0630HI1R5ME 1.50 μh, ±20% A 9.00 A 35 MHz 14.0 mω 15.0 mω 1R5 PM0630HI2R2ME 2.20 μh, ±20% A 8.00 A 29 MHz 18.0 mω 20.0 mω 2R2 PM0630HI3R3ME 3.30 μh, ±20% A 6.80 A 22 MHz 28.0 mω 30.0 mω 3R3 PM0630HI4R7ME 4.70 μh, ±20% A 5.50 A 17 MHz 37.0 mω 40.0 mω 4R7 PM0630HI6R8ME 6.80 μh, ±20% 8.00 A 4.50 A 15 MHz 54.0 mω 60.0 mω 6R8 PM0630HI8R2ME 8.20 μh, ±20% 7.50 A 4.00 A 16 MHz 64.0 mω 68.0 mω 8R2 PM0630HI100ME μh, ±20% 7.00 A 3.00 A 14 MHz mω mω 100 SRF (yp) DC Resistance ype R HI Marking PM0530R2R2ME 2.20 μh, ±20% 5.50 A 7.00 A 38 MHz 24.0 mω 26.0 mω R 2R2 PM0530R3R3ME 3.30 μh, ±20% 5.00 A 6.50 A 28 MHz 32.0 mω 36.0 mω R 3R3 PM0530R4R7ME 4.70 μh, ±20% 4.50 A 4.50 A 25 MHz 54.0 mω 60.0 mω R 4R7 PM0530R5R6ME 5.60 μh, ±20% 4.00 A 4.50 A 19 MHz 55.0 mω 65.0 mω R 5R6 Marked yp Max Marking R 1R0 1R0 *1. Idc1: Based on inductance change Δ/o: -30% for R Δ/o: -20% for HI *2. Idc2: Based on temperature rise (Δ: 40ºC YP.) Notes: Inductance is measured in HP-4285A Precision CR Meter under 100KHz, 0.25V RDC measured in HP 4338B milliohm meter (or equivalent). 71

72 POER INDUCORS, MODED PM SERIES ENVIRONMENA PERFORMANCE SPECIFICAION VIBRAION Δ/o : ± 5% here shall be no mechanical damage ES PARAMEERS Solder specimen inductor on the test printed circuit board. Apply vibrations in each of the x, y and z directions for 2 house for a total of 6 hours. Frequency : 10~55~10Hz in 60sec as a period Amplitude : 1.5mm SODERABIIY HIGH EMPERAURE SORAGE O EMPERAURE SORAGE MOISURE SORAGE SUBSRAE BENDING he metalized area must have 90% minimum solder coverage. Δ/o : ± 5% here shall be no mechanical damage or electrical damage. Δ/o : ± 5% here shall be no mechanical damage or electrical damage. Δ/o : ± 5% here shall be no mechanical damage Δ/o : ± 5% here shall be no mechanical damage or electrical damage Preheating at 160±10ºC 90sec. 245ºC ±5ºC for 2 ±1sec. he sample shall be left for 96 hours in an atmosphere with a temperature of 85±2ºC and a normal humidity. Upon completion of the test, the measurement shall be made after the sample has been left in a normal temperature and normal humidity for 1 hour. he sample shall be left for 96 hours in an atmosphere with a temperature of 40±2ºC. Upon completion of the test, the measurement shall be made after the sample has been left in a normal temperature and normal humidity for 1 hour. he sample shall be left for 96 hours in a temperature of 40±2ºC and a humidity(rh) of 90~95%. Upon completion of the test, the measurement shall be made after the sample has been left in a normal temperature and normal humidity more than 1 hour. he sample shall be soldered onto the printed circuit board and a load applied until the figure in the arrow direction is made approximately 2mm (keep time 5 ±1 seconds). HERMA SHOCK Δ/o : ± 5% here shall be no damage or problems. he sample shall be subject to 10 continous cycles, such as shown in the following temperature cycle. Measure the test items after leaving the inductors at room temperature and humidity for 1 hour. 72

73 POER INDUCORS, MODED PM SERIES SIZE 0520: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE Saturation Current: PM0520R1R0ME Heat Rating Current: PM0520R1R0ME Saturation Current: PM0520R1R5ME Heat Rating Current: PM0520R1R5ME Saturation Current: PM0520R2R2ME Heat Rating Current: PM0520R2R2ME 73

74 POER INDUCORS, MODED PM SERIES SIZE 0520: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE Saturation Current: PM0520R3R3ME Heat Rating Current: PM0520R3R3ME Saturation Current: PM0520R4R7ME Heat Rating Current: PM0520R4R7ME Saturation Current: PM0520R5R6ME Heat Rating Current: PM0520R5R6ME 74

75 POER INDUCORS, MODED PM SERIES SIZE 0520: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE Saturation Current: PM0520R100ME Heat Rating Current: PM0520R100ME Saturation Current: PM0520HI100ME Heat Rating Current: PM0520HI100ME SIZE 0530: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE Saturation Current: PM0530R1R5ME Heat Rating Current: PM0530R1R5ME 75

76 POER INDUCORS, MODED PM SERIES SIZE 0530: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE Saturation Current: PM0530R2R2ME Heat Rating Current: PM0530R2R2ME Saturation Current: PM0530R3R3ME Heat Rating Current: PM0530R3R3ME Saturation Current: PM0530R4R7ME Heat Rating Current: PM0530R4R7ME 76

77 POER INDUCORS, MODED PM SERIES SIZE 0530: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE Saturation Current: PM0530R5R6ME Heat Rating Current: PM0530R5R6ME Saturation Current: PM0530HIR60ME Heat Rating Current: PM0530HIR60ME Saturation Current: PM0530HIR68ME Heat Rating Current: PM0530HIR68ME 77

78 POER INDUCORS, MODED PM SERIES SIZE 0530: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE Saturation Current: PM0530HIR82ME Heat Rating Current: PM0530HIR82ME Saturation Current: PM0530HI1R0ME Heat Rating Current: PM0530HI1R0ME Saturation Current: PM0530HI1R2ME Heat Rating Current: PM0530HI1R2ME 78

79 POER INDUCORS, MODED PM SERIES SIZE 0530: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE Saturation Current: PM0530HI1R5ME Heat Rating Current: PM0530HI1R5ME Saturation Current: PM0530HI2R2ME Heat Rating Current: PM0530HI2R2ME SIZE 0630: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE Saturation Current: PM0630RR47ME Heat Rating Current: PM0630RR47ME 79

80 POER INDUCORS, MODED PM SERIES SIZE 0630: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE (CONINUED) Saturation Current: PM0630RR56ME Heat Rating Current: PM0630RR56ME Saturation Current: PM0630RR68ME Heat Rating Current: PM0630RR68ME Saturation Current: PM0630RR82ME Heat Rating Current: PM0630RR82ME 80

81 POER INDUCORS, MODED PM SERIES SIZE 0630: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE (CONINUED) Saturation Current: PM0630R1R0ME Heat Rating Current: PM0630R1R0ME Saturation Current: PM0630R1R5ME Heat Rating Current: PM0630R1R5ME Saturation Current: PM0630R2R2ME Heat Rating Current: PM0630R2R2ME 81

82 POER INDUCORS, MODED PM SERIES SIZE 0630: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE (CONINUED) Saturation Current: PM0630R3R3ME Heat Rating Current: PM0630R3R3ME Saturation Current: PM0630R4R7ME Heat Rating Current: PM0630R4R7ME Saturation Current: PM0630R5R6ME Heat Rating Current: PM0630R5R6ME 82

83 POER INDUCORS, MODED PM SERIES SIZE 0630: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE (CONINUED) Saturation Current: PM0630R6R8ME Heat Rating Current: PM0630R6R8ME Saturation Current: PM0630R100ME Heat Rating Current: PM0630R100ME Saturation Current: PM0630R150ME Heat Rating Current: PM0630R150ME 83

84 POER INDUCORS, MODED PM SERIES SIZE 0630: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE (CONINUED) Saturation Current: PM0630R220ME Heat Rating Current: PM0630R220ME Saturation Current: PM0630HI1R0ME Heat Rating Current: PM0630HI1R0ME Saturation Current: PM0630HI1R5ME Heat Rating Current: PM0630HI1R5ME 84

85 POER INDUCORS, MODED PM SERIES SIZE 0630: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE (CONINUED) Saturation Current: PM0630HI2R2ME Heat Rating Current: PM0630HI2R2ME Saturation Current: PM0630HI3R3ME Heat Rating Current: PM0630HI3R3ME Saturation Current: PM0630HI4R7ME Heat Rating Current: PM0630HI4R7ME 85

86 POER INDUCORS, MODED PM SERIES SIZE 0630: SAURAION CURREN AND HEA RAING CURREN PERFORMANCE (CONINUED) Saturation Current: PM0630HI6R8ME Heat Rating Current: PM0630HI6R8ME Saturation Current: PM0630HI8R2ME Heat Rating Current: PM0630HI8R2ME Saturation Current: PM0630HI100ME Heat Rating Current: PM0630HI100ME 86

87 POER INDUCORS, MODED PM SERIES SODERING INFORMAION RECOMMENDED FOOPRIN: SIZE CODES Dimensions Units A In mm B In mm C In mm RECOMMENDED SODER AACHMEN: REFO SODERING Peak emperature: 260ºC max Max Peak emperature: -5ºC: 30sec max. Max ime above 217ºC: 60sec ~150 sec max. If hand soldering must be used, follow these precautions: Use solder iron of less than 30 when soldering. Do not allow soldering iron tip to directly touch the ferrite body outside of the terminal electrode. 2 seconds maximum at 260ºC. * his datasheet is subject to change without notice 87

88 PANAR CAPACIOR ARRAYS FOR EMI FIERING Johanson Dielectrics is the premier supplier of Planar Capacitor EMI Filter Arrays to the Filtered Connector Industry. Planar Capacitors are the fundamental building block for filtered connectors in Aerospace, Biomedical, Military, Satellite, Industrial and Communication electronics. Johanson offers high value Arrays in standard and custom solutions to fit your needs. CIRCUAR ARRAYS PHYSICA AYOU MI-1560 MI-1554 MI-1669 MI-1651 MI-1698 MI MI-AUDIO DIEECRIC MAERIA X7R & NP0 AVAIABE CAPACIANCE 47 pf to 800 nf ORKING VOAGE Up to 2,000 VDC DV VOAGE Up to 3,000 VDC RECANGUAR ARRAYS (ARINC 404/600) PHYSICA AYOU DIEECRIC MAERIA AVAIABE CAPACIANCE ORKING VOAGE DV VOAGE AR-010 hrough AR-150 X7R & NP0 47 pf to 940 nf Up to 1,330 VDC Up to 2,000 VDC D-SUBMINAURE RECANGUAR ARRAYS PHYSICA AYOU DIEECRIC MAERIA AVAIABE CAPACIANCE ORKING VOAGE DV VOAGE Full Size 47pF - 210nF 2,400 3,600 Mini-D 47pF - 100nF 1,000 1,500 Micro-D X7R 47pF nF 680 1,020 Nano-D & 47pF - 3.0nF Combo-D NP0 47pF - 6.0nF 800 1,200 Power-D 47pF - 120nF 680 1,020 Special 47pF - 50nF

89 PANAR CAPACIOR ARRAYS FOR EMI FIERING CUSOM ARRAYS Johanson Dielectrics s design expertise and CNC manufacturing process enable broad custom array capability. Many shapes, configurations and geometries are possible. Share your requirements and we will create a solution! DISCOIDA CAPACIORS Johanson Discoidal Feed-through Capacitors are the functional element in widely used EMI feed-through filters. his capacitor configuration offers very low impedance and inductance. Discoidal capacitors are ideal for by-pass, filtering, coupling, single line EMI/RFI suppression, and high frequency applications. Capacitance values from 10 pf to 11.2 μf est standards and procedures per MI-SD-202 and MI-C-123 Voltage ratings from 50 to 3000 VDC and 50 to 240 VAC ow ESR and ES, non-polar designs Call us to discuss your special requirements! NOMINA O.D. (IN.) DIEECRIC MAERIA AVAIABE CAPACIANCE INSIDE DIAMEER (IN.) HICKNESS (IN.) RAED VOAGE ± pf 66 nf ± ±0.070 Up to 200 VDC ± pf 200 nf ± ±0.070 Up to 200 VDC ±.005 X7R 10 pf 2.8 µf ± ±0.110 Up to 500 VDC ±.005 & 10 pf 6.0 µf ± ±0.110 Up to 750 VDC ±.005 NP0 10 pf 8.0 µf ± ±0.125 Up to 750 VDC ± pf 15 µf ± ±0.150 Up to 750 VDC ± pf 20 µf ± ±0.130 Up to 1000 VDC 89

90 CAPSRAE CAPACIOR SUBSRAES Discrete Circuit Johanson CapStrate products integrate bulk capacitance into a ceramic substrate eliminating large discrete capacitive components which saves critical space and simplifies the assembly process. Our design and manufacturing expertise in large format, custom geometries provides innovative solutions that economically solve a wide variety of your design challenges. CapStrate Circuit ADVANAGES Major Size & eight Reduction Fewer Solder Joints ower Assembly Cost Circuit Assembly Available KEY FEAURES Integrated Capacitance in he Substrate Rated orking Voltages from 50V to 5,000V emperature ranges: -55 C to 125 C (specials to 200 C and 250 C) Compact Designs Utilizing Military Grade Ceramics Custom Sizes, Values, and Voltages Available SIZE / CAPACIANCE CAPABIIY EXAMPES SUBSRAE SIZE ENGH IDH HICK CapStrate 4 In mm CapStrate 3 In mm CapStrate 1 In mm CapStrate 2 In mm CapStrate 6 In mm Circular CapStrate Capacitance Formula NP0 50V NP0 100V NP0 200V NP0 500V X7R 50V X7R 100V X7R 200V X7R 500V 0.22µF 0.15µF 0.12µF 0.07µF 9.0µF 6.0µF 3.0µF 1.5µF 0.70µF 0.50µF 0.39µF 0.22µF 28.0µF 20.0µF 9.0µF 4.7µF 1.40µF 1.00µF 0.75µF 0.44µF 50.0µF 40.0µF 18.0µF 9.4µF 2.00µF 1.40µF 1.00µF 0.60µF 75.0µF 55.0µF 25.0µF 14.0µF 4.00µF 2.80µF 2.00µF 1.20µF 150.0µF 110.0µF 50.0µF 28.0µF µf µf µf µf / In 2 µf / In 2 µf / In 2 / In 2 / In 2 / In 2 µf / In 2 µf / In 2 his chart is intended to provide capability examples. Not all possibilities are shown and we invite application specific inquiries. Circular CapStrate example lists available capacitance per area. 90

91 CUSOM CAPACIOR SOUIONS Johanson s extensive experience in design and manufacture of large format, custom geometries allows us to develop unique and innovative solutions which successfully solve a wide variety of our customer s design challenges. e ll work pro actively with you to fully understand your requirements and recommend the best solution possible. KEY FEAURES Custom shapes to fit specific requirements Multiple capacitors in a single assembly NP0/COG and X7R solutions from -55 C to +125 C Multiple pin, lead-frame, and flying wire options Bare ceramic, epoxy coated, potted solutions VARIABE PICH ASSEMBIES Another custom approach is our variable pitch design. No longer are you limited to a vendor s standard catalogue offering or only square or rectangular custom designs. e let you become your own capacitor designer by not only telling us the desired capacitance and voltage, but also the size, shape, and location of leads! his process helps insure that the resulting capacitor satisfies every aspect of your design requirements. ON-INE PRODUCS 200 C Radial eaded Capacitors arge Size MC Capacitors High Power AC Capacitors 91

92 CAPACIOR GENERA EECRICA CHARACERISICS & PN BREAKDON EECRICA CHARACERISICS PARAMEER NP0 X7R X5R EMPERAURE COEFFICIEN: 0± 30 ppm/ C -55 to +125 C ± 15% -55 to +125 C ± 15% -55 to +85 C 20% 20% 20% 0% 0% 0% -20% -20% -20% -40% -40% -40% -60% -60% -60% -80% -55 C -25 C 0 C 25 C 50 C 75 C 100 C 125 C -80% -55 C -25 C 0 C 25 C 50 C 75 C 100 C 125 C -80% -55 C -25 C 0 C 25 C 50 C 75 C 100 C 125 C DISSIPAION FACOR:.001 (0.1%) max VDC 50 VDC, DF = 2.5% max VDC = 25 VDC, DF = 3.0% max VDC = 16 VDC, DF = 3.5% max For Vrated 50 VDC, DF = 5% max For Vrated 25 VDC: DF = 10% max AGING: None 2.5% / decade hour 2.5 % / decade hour INSUAION RESISANCE: DIEECRIC SRENGH: ES PARAMEERS: NOES: 1000ΩF or 100GΩ whichever is 25 C, VDC 500ΩF or 50GΩ whichever is 25 C, VDC For Vrated = VDC, DV = 2.5 X VDC, 25 C, 50mA max. For Vrated = VDC, DV = 2.0 X VDC, 25 C, 50mA max. For Vrated = VDC, DV = 1.5 X VDC, 25 C, 50mA max. For Vrated = VDC, DV = 1.2 X VDC, 25 C, 50mA max. C > 100 pf; 1kHz ±50Hz;1.0±0.2 VRMS 1kHz ±50Hz;1.0±0.2 VRMS C 100 pf 1Mhz ±50kHz; 1.0±0.2 VRMS anceram IR = 100 ΩF or 10 GΩ anceram DF for Vrated 50 VDC = 5% max. anceram DF for Vrated 25 VDC, DF = 10% max 100ΩF or 10GΩ whichever is 25 C, VDC DV = 2.5 X VDC, 25 C, 50mA max. 1kHz ±50Hz; 0.5±0.2 VRMS PAR NUMBER BREAKDON - SURFACE MOUN Part number written: 502R29102KV3E-****-SC 502 R K V 3 E VOAGE SERIES/SIZE DIEECRIC CAPACIANCE OERANCE ERMINAION MARKING PACKING 6R3 = 6.3 V DC 100 = 10 V DC 160 = 16 V DC 250 = 25 V DC 500 = 50 V DC 101 = 100 V DC 201 = 200 V DC 251 = 250 V DC 301 = 300 V DC 501 = 500 V DC 631 = 630 V DC 102 = 1000 V DC 202 = 2000 V DC 302 = 3000 V DC* 402 = 4000 V DC 502 = 5000 V DC* ACJ = 250 VAC * For Safety Caps with -****-SC P/N suffix only: 302 = 250VAC [2500V Impulse] 502 = 250VAC [5000V Impulse] A = ARRAY B = ICC F = F- FIER R = MCC S = MCC = HI EMP MCC X = X2Y _05=0201 _07=0402 _14=0603 _15=0805 _18=1206 _41=1210 _29=1808 _30=2211 _43=1812 _44=1410 _47=2220 _49=1825 _48=2225 N = NP0 = X7R X = X5R 1st two digits are significant; third digit denotes number of zeros, R = decimal. 5R6 = 5.6 pf 100 = 10 pf 102 = 1,000 pf 474 = 0.47 µf 475 = 4.7 µf 106 = 10 µf * B = ± 0.10 pf * C = ± 0.25 pf * D = ± 0.50 pf * F = ± 1 % * G = ± 2% * J = ± 5% * K = ± 10% * M = ± 20% * Y = % * Z = % *Values < 10 pf only V = Nickel Barrier with 100% in Plating (Matte) F = Polyterm flexible termination G = Gold = SnPb P = PdAg 3 = Special 4 = Unmarked 6 = EIA Code* *Not available on sizes ****- SC PAR NUMBER MODIFIER E = Embossed 7 = Punched 7 U = Embossed 13 R = Punched 13 No code = bulk pack ape specifications conform to EIA RS481 Not all tape styles are available on all parts. Used on select parts such as Safety Certified or for customer specific requirements. PEASE NOE: Not all combinations of JDI P/Ns are valid. Please refer to the How to Order detail section of the specific product or contact your Sales Representative if you need assistance. 92

93 CAPACIOR PACKAGING Johanson capacitors are available taped per EIA standard 481. ape options include 7 and 13 diameter reels. Johanson uses high quality, dust free, punched 8mm paper tape and plastic embossed 8mm tape for thicker MCCs. Quantity per reel ranges are listed in the tables below and are dependent on chip thickness. Feed Direction Embossed ape.083 max. (2.1).012±.004 (0.3±0.1) ( ) 8mm idth; 4mm or 2mm Pitch Sproket Holes.157±.004 (4.0±0.1) Punched ape.067±.004 (1.7±0.1).055 max.(1.2).079±.020 (2.0±0.5) Bo.138±.002 (3.5±0.05) idth.315±.008 (8.0±0.2) Ao.083±.020 (21±0.5) P/N 500R07N100JV4E ot # S.O. # F03456 M.O. # MO min. (50.0).510±.020 (13±0.5).098 max. (2.5) Cover ape Pitch =.157±.004 (4.0±0.1) or.079±.004 (2.0±0.1).079±.002 (2.0±0.05) Cover ape Embossed ape 12mm idth; 8mm or 4mm Pitch Punched ape.067± Sproket Holes.157±.004 ( ) (4.0±0.1) (1.7±0.1).012±.004 (0.3±0.1) Bo Ao.220±.004 (5.5±0.1) idth.472±.008 (12.0±0.2) 7.0±.079 (178±2.0) or 13.0±.079 (330±2.0) or ( ) ( ) Pitch =.314±.004 (8.0±0.1) or.157±.004 (4.0±0.1).079±.002 (2.0±0.05) 7 DIAMEER REE 13 DIAMEER REE COMPONEN REE QY APE YPE IDH / PICH CODE REE QY APE YPE IDH / PICH CODE R05 / 0201 MCC Paper 8mm/2mm N/A N/A N/A R07 / 0402 MCC Paper 8mm/2mm N/A N/A N/A R14 / 0603 MCC 4000 Paper 8mm/4mm Paper 8mm/4mm R R15 / 0805 MCC 4000 / 3000 Paper / Embossed 8mm/4mm / E Paper / Embossed 8mm/4mm R / U R18 / 1206 MCC 4000 / 3000 Paper / Embossed 8mm/4mm / E Paper / Embossed 8mm/4mm R / U S41 / 1210 MCC Embossed 8mm/4mm E Embossed 8mm/4mm U R29 / 1808 MCC 2000 Embossed 12mm/4mm E Embossed 12mm/4mm U R30 / 2211 MCC Embossed 12mm/4mm E Embossed 12mm/4mm U S43 / 1812 MCC Embossed 12mm/8mm E Embossed 12mm/8mm U S47 / 2220 MCC Embossed 12mm/8mm E Embossed 12mm/8mm U S49 / 1825 MCC Embossed 12mm/8mm E Embossed 12mm/8mm U S48 / 2225 MCC Embossed 12mm/8mm E Embossed 12mm/8mm U X07 / 0402 X2Y 4000 Paper 8mm/2mm Paper 8mm/2mm R X14 / 0603 X2Y 4000 Paper 8mm/4mm Paper 8mm/4mm R X15 / 0805 X2Y 4000 Embossed 8mm/4mm E Embossed 8mm/4mm U X18 / 1206 X2Y Embossed 8mm/4mm E Embossed 8mm/4mm U X41 / 1210 X2Y Embossed 8mm/4mm E X44 / 1410 X2Y Embossed 8mm/4mm E X43 / 1812 X2Y 1000 Embossed 12mm/8mm E Actual reel quantities based on part thickness and tape type. Contact sales for reel quantities of specific part numbers. 93

94 POER INDUCORS, SEMI-SHIEDED (COAED) PC SERIES REE DIMENSIONS (Unit: mm) SIZE CODE REE QY 7 DIA. REE SIZE APE YPE APE CODE Embossed E Embossed E Embossed E Embossed E SIZE CODE REE QY 13 DIA. REE SIZE APE YPE APE CODE Embossed E Embossed E Embossed E Embossed E APPING FIGURE 94

95 POER INDUCORS, SEMI-SHIEDED (COAED) PC SERIES APE DIMENSIONS (Unit: mm) Size Codes A0 B0 K0 E F D D1 P P2 Po 10Po PACKAGING FORM (Unit: mm) Size Codes A B C

96 POER INDUCORS, MODED PM SERIES REE DIMENSIONS (Unit: mm) SIZE CODE REE QY 13 DIA. REE SIZE APE YPE APE CODE Embossed E Embossed E Embossed E APPING FIGURE 96

97 POER INDUCORS, MODED PM SERIES APE DIMENSIONS (Unit: mm) Size Codes A0 B0 C K0 E F D D1 P P2 Po 10Po % % % PACKAGING FORM (Unit: mm) Size Codes A B C

98 COMPANY CERIFICAIONS & CORPORAE RESPONSIBIIIES RoHS 2 All standard parts* manufactured by Johanson Dielectrics, Inc. after January 1, 2006 are fully compliant to the European Union Directive 2002/95/EC and the new EU Directive 2011/65/EC Restriction of Hazardous Substances commonly referred to as RoHS 2 as of January 2, REACH All parts (articles) manufactured by Johanson Dielectrics meet the requirements for REACH and do not contain any of the SVHC chemicals listed above the levels mandated by the ECHA. ead-free erminations All standard terminations (JDI termination code V ) of our SM components consist of 100% in plating in a matte finish over Nickel. Components with these terminations are capable of a 260 C maximum reflow temperature for a duration of 5 seconds and compatible with most common lead-free solder processes. in hisker test results are published in the Johanson echnical Note: in hisker esting Sn-Pb erminations In response to specific industry and customer requests, Johanson Dielectrics produces a limited amount of product featuring in-ead (Sn-Pb) erminations (JDI termination code.) his product is non-rohs compliant due to the Pb constituent in the termination as required in certain specialty applications e.g. Military & Space. egacy RoHS Compliant P/N Suffix In 2005 a Johanson part number suffix of -****-RC was implemented to assist customers in identifying compliant and non-compliant inventory during their transition to RoHS compliancy. he RC suffix is no longer necessary to ensure compliance and should not be utilized for new designs. JDI will continue to support these legacy part numbers for the benefit of customers with these part numbers on current AVs / BOM s. Conflict Minerals Reporting In response to the worldwide determination to limit funding of human rights violations in the Democratic Republic of the Congo (DRC), Johanson Dielectrics (JDI) ensures that our products do not contain the conflict minerals of tungsten, tantalum, tin, and gold supplied by the DRC and their neighboring countries. JDI has verified through our suppliers that their smelters and refiners produce Conflict Free Minerals. JDI participates in the generation of lists of Conflict Free Mineral Smelters and Refineries started by the Security and Exchange Commission. Electronic Industry Citizenship Coalition (EICC ) Code of Conduct Johanson companies, Johanson Dielectrics Inc. and Johanson echnology Inc., declare our full support for and will actively pursue conformance to the Electronic Industry Citizenship Coalition (EICC ) Code of Conduct for our employees, supply chain, and subcontractors, including providers of contract labor. 98

99 INDEX OF APPICAION NOES AVAIABE A JOHANSONDIEECRICS.COM GENERA Ceramic Capacitor aging made simple Capacitor Cracks: Still with us after all these years Understanding Ceramic Capacitors termination Capacitors Packaging & Marking Electrical Characteristics MCC Storage and Handling Conditions Qualified DSCC and Military Specifications APPICAION NOES AC Power Computations for DC Rated Capacitor Arc Season and Board Design Observations Corona Effects and their impact on PB ayout induced Hipot failures DC-DC Converter trends and Output Filter Capacitors Impact of pad design and spacing on AC breakdown performance Pb Free Application Notes Polyterm Flexible SMD ermination Safety Certified Application Notes Sn/Pb SM Application Notes Soldering and Handling precautions for arge Form Capacitors and Planar Arrays antalum replacement MC s and ESR Curves PROCESSING Foward/Backward process compatability Pb Free Application Notes Peak Reflow times, temperature and the impact of MS in isker testing X2Y APPICAION NOES Amplifier Decoupling: X2Y vs MCC GSM RFI Supression with X2Y EMI Filters X2Y Filter Evaluation and PCB design guide Improve instrument amplifier performance with X2Y optimized input filter X2Y DC motor filtering basics X2Y power bypass mounting X2Y SerDes bypass example PRODUC RAINING Basics of Ceramic Chip Capacitors 99

100 Your echnology Partner High Voltage AC Safety EMI Filters (X2Y ) High Capacitance High emperature AC Power Precision Power Resistors ow ES SMPS Radial eaded Planar Arrays Custom Solutions EUROPE: JOHANSON EUROPE, D. Flackwell Heath, Bucks, England HP10 9NR E FAX [email protected] UNIED SAES: HEADQUARERS Bledsoe St., Sylmar, California E (818) FAX (818) Publication JD HONG KONG: JOHANSON HONG KONG, D. Unit E, 11/F., Phase 1 Kaiser Estate 41 Man Yue St., Hunghom Kowloon, Hong Kong E FAX [email protected]