Transmitting s with the WAGO IPC Application note

Transcription

1 Transmitting s with the WAGO IPC , English Version 1.0.0

2 2 General Copyright 2005 by WAGO Kontakttechnik GmbH All rights reserved. WAGO Kontakttechnik GmbH Hansastraße 27 D Minden Phone: +49 (0) 571/ Fax: +49 (0) 571/ [email protected] Web: Technical Support Phone: +49 (0) 571/ Fax: +49 (0) 571/ [email protected] Every conceivable measure has been taken to ensure the correctness and completeness of this documentation. However, as errors can never be fully excluded we would appreciate any information or ideas at any time. We wish to point out that the software and hardware terms as well as the trademarks of companies used and/or mentioned in the present manual are generally trademark or patent protected.

3 Table of Contents 3 TABLE OF CONTENTS 1 Important comments Legal principles Copyright Personnel qualification Intended use Range of validity Symbols Description Solution to mail server in the Intranet to mail server in the Internet Example WagoLibMail_01_example_v1.pro...9

4 4 Important comments 1 Important comments 1.1 Legal principles Copyright To ensure fast installation and start-up of the units described in this manual, we strongly recommend that the following information and explanation is carefully read and adhered to. This manual is copyrighted, together with all figures and illustrations contained therein. Any use of this manual which infringes the copyright provisions stipulated herein, is not permitted. Reproduction, translation and electronic and photo-technical archiving and amendments require the written consent of WAGO Kontakttechnik GmbH. Non-observance will entail the right of claims for damages Personnel qualification Intended use The use of the product detailed in this manual is exclusively geared to specialists having qualifications in PLC programming, electrical specialists or persons instructed by electrical specialists who are also familiar with the valid standards. WAGO Kontakttechnik GmbH declines all liability resulting from improper action and damage to WAGO products and third party products due to non-observance of the information contained in this manual. For each individual application, the components supplied are to work with a dedicated hardware and software configuration. Modifications are only admitted within the framework of the possibilities documented in the manuals. All other changes to the hardware and/or software and the non-conforming use of the components entail the exclusion of liability on part of WAGO Kontakttechnik GmbH. Please direct any requirements pertaining to a modified and/or new hardware or software configuration directly to WAGO Kontakttechnik GmbH.

5 Important comments Range of validity 1.3 Symbols This application note is based on the stated hardware and software of the specific manufacturer as well as the correspondent documentation. This application note is therefore only valid for the described installation. New hardware and software versions may need to be handled differently. Please note the detailed description in the specific manuals. Danger Always observe this information to protect persons from injury. Warning Always observe this information to prevent damage to the device. Attention Marginal conditions must always be observed to ensure smooth operation. ESD (Electrostatic Discharge) Warning of damage to the components by electrostatic discharge. Observe the precautionary measure for handling components at risk. Note Routines or advice for efficient use of the device and software optimisation. More information References to additional literature, manuals, data sheets and INTERNET pages

6 6 Description 2 Description Use of the library "WagoLibMail_01" for dispatching s with the WAGO IPC directly to a mail server in the Intranet. -directly to a mail server in the Internet over a router. Reference Material The connection was tested under the following prerequisites. Assigned hardware components: WAGO IPC ISDN Router (Release01) BinTec - X1000 Assigned software components: CAA V WagoLibMail_01.lib Version 1.0 WagoLibMail_01_example_v1.pro Example project Microsoft Outlook 2000 WAN: Internet Provider Mail Provider Arcor, Freenet Web.de

7 Solution 7 3 Solution The WAGO IPC offers among other things the possibility to dispatch s. For this purpose two functional modules are made available in the library WagoLibMail_01.lib, which allows the user to send a mail without knowledge of the mail protocol (SMTP). In the following two versions are demonstrated. Both versions are covered by the example. Depending on the selected version additional tools will be used for configuration to mail server in the Intranet The example permits transmitting s of any sender to a certain address in the Intranet. Prerequisites: - Mail server in network: e.g.: ArGoSoft-Mail-Server - Account for mail server: e.g.: MyLocalAccount/MyLocalPassword address: e.g.: MyLocal @MyDomain.com IP: SM: WAGO Recipient Ethernet Mail Server IP: SM: Important parameters of the WAGO IPC and Mail server are: - IP address. - network mask.

8 8 Solution 3.2 to mail server in the Internet The example permits transmitting s to any recipient by Internet. A valid mail server account of an Internet service provider (ISP) is needed as sender. Prerequisites: - ISDN-Router Mail server in Internet: e.g.: web.de - Account for mail server: e.g.: MyWebAccount/MyWebPassword address: e.g.: My @web.de IP: SM: GW: WAGO Recipient IP: SM: Ethernet ISDN-Router ISDN ISP-Mail-Server (web.de) SMTP-Server: POP3-Server: Important parameters of the WAGO IPC are: - IP addresses. - network mask. - IP address of the ISDN-Router as gateway.

9 Example WagoLibMail_01_example_v1.pro 9 4 Example WagoLibMail_01_example_v1.pro The user interface of the function block Mail_SMTP_Client is shown below. By setting the variable xsend to True a mail will be transmitted. Transmitting s over the Internet makes use of different authorization methods. One way is done by the POP 3 protocol. With the function block MAIL_Pop3_Client it is assumed that authorization by POP3 protocol, in accordance with «Pop3 before SMTP», at the mail provider is possible. Furthermore a fixed IP address for the SMTP- und POP3 server is assumed.

10 WAGO Kontakttechnik GmbH Postfach 2880 D Minden Hansastraße 27 D Minden Phone: 05 71/ Telefax: 05 71/ [email protected] Internet: