Packaging. ArcelorMittal Europe Flat Products
|
|
|
- Brice Simon
- 9 years ago
- Views:
Transcription
1 ArcelorMittal Europe Flat Products Packaging ÖÖ Unpickled hot rolled coils 2 ÖÖ Pickled hot rolled coils 3 ÖÖ Cold rolled, electrogalvanised, galvanised and aluminised coils 6 ÖÖ Organic coated coils 12 1
2 Packaging unpickled hot rolled coils Unpickled hot rolled coils In this chapter you will find the packaging code definitions for the unpickled hot rolled steels that are mentioned in the A, C50 and D52 product catalogue sheets. These will enable you to check the components and characteristics of our standard packaging. Land and Fluvial Transport H01 (1) (R e 400 MPa) (Land) 2 circumferential straps H02 (1) (R e 400 MPa) (Fluvial) 2 circumferential straps 1 radial strap placed at the end side of the external lap H03 (1) (400 < R e 550 MPa) 2 circumferential straps 2 radial straps: one placed at the end side of the external lap, the other opposite to the first one H05 (1) (R e 550 MPa) 3 circumferential straps 4 radial straps: one placed at the end side of the external lap, the others at 90 Fluvial, Maritime Continental and Intercontinental Transport H03 (1) (R e 400 MPa) 2 circumferential straps 2 radial straps: one placed at the end side of the external lap, the other opposite to the first one H04 (1) (400 < R e 550 MPa) 2 circumferential straps 3 radial straps: one placed at the end side of the external lap, the other two at 120 H06 (1) (R e 550 MPa) 4 circumferential straps 6 radial straps equally spaced H07 (1) (R e 550 MPa) (Straps 32 x 1.27 mm) 4 circumferential straps 4 radial straps equally spaced / (1) Labelling: 1 self-adhesive label on the external lap and another on the internal lap opposite to the first one Alternative: 1 label on each side on a strapped label-holder Remark: Packaging definition may vary slightly due to technical advances or specific local conditions. 2
3 Packaging pickled hot rolled coils Pickled hot rolled coils In this chapter you will find the packaging code definitions for the pickled hot rolled steels that are mentioned in the A, C50 and D52 product catalogue sheets. These will enable you to check the components and characteristics of our standard packaging. Land and Fluvial Transport (oiled products) P01/P0A (1) P01 (R e 550 MPa): 2 circumferential straps 3 radial straps at o clock P0A (R e 550 MPa): 4 circumferential straps + 4 radial straps P02 (1) 2 circumferential straps Land and Fluvial Transport (unoiled products) P11/P1A (1) P11: 2 circumferential straps P1A: same definition but 4 circumferential straps + 1 radial strap on unwrapped coil P13/P1C (1) P13 (R e 550 MPa): 2 circumferential straps P1C (R e 550 MPa): same definition but 4 circumferential straps + 1 radial strap on unwrapped coil P14/P1D (1) P14 (R e 550 MPa): 2 circumferential straps 2 x 1/3 outer edge protection rings (steel) P1D (R e 550 MPa): same definition but 4 circumferential straps + 1 radial strap on unwrapped coil 3
4 Packaging pickled hot rolled coils Fluvial and Maritime Continental Transport P16/P1F (1) P16 (R e 550 MPa): 2 circumferential straps P1F (R e 550 MPa): same definition but 4 circumferential straps + 1 radial strap on unwrapped coil P21/P2A (1) P21 (R e 550 MPa): 2 circumferential straps 1/3 outside sleeve/circumferential protection (hardboard) 2*1/4 side protection disks (hardboard) P2A (R e 550 MPa): same definition but 4 circumferential straps + 1 radial strap on unwrapped coil P22/P2B (1) P22 (R e 550 MPa): 2 circumferential straps (hardboard) 1/3 outside sleeve/circumferential protection (hardboard) 2*1/4 side protection disks (hardboard) + corner protectors or Us (steel) P2B (R e 550 MPa): same definition but 4 circumferential straps + 1 radial strap on unwrapped coil 4
5 Packaging pickled hot rolled coils Maritime Continental and Intercontinental Transport P24/P2D (2) P24 (R e 550 MPa): 2 circumferential straps Inside sleeve protection (hardboard steel for thickness 4 mm) Outside sleeve/circumferential protection (hardboard) 1 central circumferential strap 2 side protection disks (hardboard) P2D (R e 550 MPa): same definition but 4 circumferential straps + 1 radial strap on unwrapped coil P25/P2E (2) P25 (R e 550 MPa): 2 circumferential straps Inside sleeve protection (steel) Outside sleeve/circumferential protection (steel) + 1 circumferential strap 2 side protection disks (hardboard) P2E (R e 550 MPa): same definition but 4 circumferential straps + 1 radial strap on unwrapped coil (1) Labelling: 1 label on each side on a strapped label-holder placed at 10h (2) Labelling: 1 label on each side on a self-adhesive label-holder placed at 10h Remark: Packaging definition may vary slightly due to technical advances or specific local conditions. / 5
6 Packaging cold rolled, electrogalvanised, galvanised and aluminised coils Cold rolled, electrogalvanised, galvanised and aluminised coils In this chapter you will find the packaging code definitions for the cold rolled, electrogalvanised, galvanised and aluminised steels that are mentioned in the B, C (excl. C50), D (excl. D52) and E product catalogue sheets. These will enable you to check the components and characteristics of our standard packaging. C01/C0Y/C0Z (1) C01: 3 radial straps at o clock C0Y: same definition but 4 radial straps C0Z: same definition but 2 radial straps (Road Land Transport only) C02/C0V (1) C02 (thickness 2 mm): C0V (high thicknesses): same definition + 1 central circumferential strap with graps protection C03 (1) Width 1600 mm: + 1 circumferential strap C04 (1) (non-visible parts) C0A (1) (steel) 6
7 Packaging cold rolled, electrogalvanised, galvanised and aluminised coils C05 (1) (visible parts or thickness < 0.6 mm) C0B (1) Complete external oiling of the coil (steel) 2 corner protectors or Us (steel) C06 (1) 2 circumferential straps + graps protection as closest as possible to the edges (graps placed between 2 and 3 or 9 and 10 o clock, if possible at the end of the external lap) Land and Fluvial Transport (with paper or plastic wrap) C14/CL4 (1) (non-visible parts) C14: CL4: same definition + cradle C1A (1) 4 corner protectors or Us (steel) 7
8 Packaging cold rolled, electrogalvanised, galvanised and aluminised coils C15/CL5 (1) (visible parts) C15: Thickness 1 mm: 1 radial strap + corner protectors or Us (steel) at the end of the external lap CL5: same definition + cradle C1B (1) Complete external oiling of the coil (steel) 4 corner protectors or Us (steel) C16/CL6 (1) (non-visible parts) (long transport duration or multiple handlings) C16: CL6: same definition + cradle C17/CL7 (1) (visible parts or thickness < 0.6 mm) (long transport duration or multiple handlings) C17: Thickness 1 mm: 1 radial strap + corner protectors or Us (steel) at the end of the external lap CL7: same definition + cradle 8
9 Packaging cold rolled, electrogalvanised, galvanised and aluminised coils Fluvial and Maritime Continental Transport C21 (1) Inside sleeve protection (hardboard) 1/3 outside sleeve/circumferential protection (hardboard) 2*1/4 side protection disks (hardboard) (steel) C22 (1) Inside sleeve protection (hardboard) (hardboard) 1/3 outside sleeve/circumferential protection (hardboard) 2*1/4 side protection disks (hardboard) + corner protectors or Us (steel) C23 (1) Inside sleeve protection (hardboard) Outside sleeve/circumferential protection (hardboard) 1 central circumferential strap 2*1/4 side protection disks (hardboard) 9
10 Packaging cold rolled, electrogalvanised, galvanised and aluminised coils Maritime Continental and Intercontinental Transport C24/CM4 (2) C24: Thickness 1 mm: 1 radial strap + corner protectors or Us (steel) at the end of the external lap Inside sleeve protection (hardboard) Outside sleeve/circumferential protection (hardboard) 1 central circumferential strap 2 side protection disks (hardboard) CM4: same definition + cradle C26 (2) Inside sleeve protection (steel) Outside sleeve/circumferential protection (steel) + 1 circumferential strap + 1 seal protector 2 side protection disks (steel) 10
11 Packaging cold rolled, electrogalvanised, galvanised and aluminised coils Maritime Intercontinental Transport C27 (2) Inside sleeve protection (hardboard) Inside sleeve protection (hardboard 2 nd layer) Outside sleeve/circumferential protection (hardboard) 1 central circumferential strap 2 side protection disks (hardboard) C28 (2) 1 st complete layer (hardboard) + 1 circumferential strap 3 radial straps at o clock Tightness wrap in PE film 2 nd complete layer (hardboard) + 1 circumferential strap (1) Labelling: 1 label on each side on a strapped label-holder placed at 10h (2) Labelling: 1 label on each side on a self-adhesive label-holder placed at 10h Remark: Packaging definition may vary slightly due to technical advances or specific local conditions. / 11
12 Packaging organic coated coils Organic coated coils In this chapter you will find the packaging code definitions for the organic coated steels that are mentioned in the F product catalogue sheets and the D varnishes sheets. These will enable you to check the components and characteristics of our standard packaging. For buildings Land and Fluvial Transport L02 (1) L03 (1) L04 (1) L05 (1) L06/LK6 (1) L06: 2 outer edge protection rings LK6: same definition + cradle L07 (1) 2 outer edge protection rings 12
13 Packaging organic coated coils For domestic appliances Land and Fluvial Transport L14 (1) L15 (1) L16/LL6 (1) L16: 2 outer edge protection rings LL6: same definition + cradle L17 (1) 2 outer edge protection rings L19 (1) 2*1/3 topside edge protection rings (steel) 2*1/3 bottomside edge protection rings (steel) Cut off the excess paper (hardboard) 2 circumferential straps 13
14 Packaging organic coated coils For all applications Maritime Continental and Intercontinental Transport L24/LM4 (2) L24: Thickness 1 mm: 1 radial strap + corner protectors or Us (steel) at the end of the external lap Inside sleeve protection (hardboard) Outside sleeve/circumferential protection (hardboard) 1 central circumferential strap 2 side protection disks (hardboard) LM4: same definition + cradle L25/LM5 (2) L25: Thickness 1 mm: 1 radial strap + corner protectors or Us (steel) at the end of the external lap Inside sleeve protection (steel) Outside sleeve/circumferential protection (steel) + 1 circumferential strap + seal protector 2 side protection disks (hardboard) LM5: same definition + cradle (1) Labelling: 1 label on each side on a strapped label-holder placed at 10h (2) Labelling: 1 label on each side on a self-adhesive label-holder placed at 10h Remark: Packaging definition may vary slightly due to technical advances or specific local conditions. / ArcelorMittal Europe Flat Products 24-26, boulevard d Avranches L-1160 Luxembourg [email protected] industry.arcelormittal.com Credits Photo: Jeroen Op de Beeck Copyright All rights reserved for all countries. This publication shall not be reproduced, in whole or in part, in any form or by any means whatsoever, without prior express written consent from ArcelorMittal. Care has been taken to ensure that the information in this publication is accurate, but this information is not contractually binding. ArcelorMittal and any other ArcelorMittal Group company do not therefore accept any liability for errors or omissions or any information that is found to be misleading. As this document may be subject to change at any time, please consult the latest information on industry.arcelormittal.com/catalogue 07/ Published by ArcelorMittal Europe Communications
Description of mechanical properties
ArcelorMittal Europe Flat Products Description of mechanical properties Introduction Mechanical properties are governed by the basic concepts of elasticity, plasticity and toughness. Elasticity is the
PAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
Claims Management Policy
Claims Management Policy INTRODUCTION ARCELORMITTAL DOFASCO CLAIMS MANAGEMENT POLICY This general claims policy covers light flat rolled sheet products produced at all ArcelorMittal Dofasco flat rolled
ArcelorMittal Europe Flat Products. Steel solutions for solar installations Your partner around the world
ArcelorMittal Europe Flat Products Steel solutions for solar installations Your partner around the world 2 Contents 3 ArcelorMittal Your partner around the world 5 Steel, the material of choice 6 Magnelis
CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
EH-20 20m antenna. By VE3RGW
EH-20 20m antenna By VE3RGW Equivalent circuit of EH-20 (prototype 2A) antenna system. Upper cylinder Lower cylinder Ground Counter pose Phasing coil Impedance transformer and tune circuit Tune coil Feed
Welding. ArcelorMittal Europe Flat Products. Definitions of welding and weldability. Consequences of welding
ArcelorMittal Europe Flat Products Welding Definitions of welding and weldability Welding of metal parts is a joining process designed to ensure metallic continuity across the joint. This continuity is
300mm. 2mm MIN GAP. PLACE 100mm X 100mm. SO THAT IT IS 38mm INTO
INSTALL PEEL & STICK (P&S) GUSSETS WITH PRIMER AS PER MANUFACTURERS INSTRUCTIONS 2mm MIN GAP IN SHEATHING STEP 1 PLACE 100mm X 100mm PIECE OF P&S IN CORNER SO THAT IT IS 38mm INTO THE OPENING EACH WAY
Measurement & Analytics Measurement made easy. Force Measurement Products Cold rolling and processing of steel
Measurement & Analytics Measurement made easy Force Measurement Products Cold rolling and processing of steel Safe Rolling and Processing. The core of ABB measurement technologies is long-term measurement
Skirt 1 / 4. The Skirt. The skirt patterns were downloaded from Mark's site but they need expanding before they can be used.
Skirt 1 / 4 The Patterns The Skirt The skirt patterns were downloaded from Mark's site but they need expanding before they can be used. I used Corel Draw's real world dimensions to expand the patterns
Flexible Circuit Simple Design Guide
Flexible Circuit Simple Design Guide INDEX Flexible Circuit Board Types and Definitions Design Guides and Rules Process Flow Raw Material Single Side Flexible PCB Single Side Flexible PCB (Cover layer
Amendments to the Compendium of Classification Opinions
Amendments to the Compendium of Classification Opinions The following list contains the decisions taken by the Harmonized System Committee (35 th Session March 2005) concerning amendments to the Harmonized
All the above mentioned technical characteristics of the MU 2500 Thermal system indemnify its air and water tightness.
MU INTRODUCTION MU 2500 Thermal,.,,,,. The MU 2500 Thermal system can be used for doors and windows in domestic and commercial applications such as houses, villas, big complexes of flats and offices.
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips thick film chip resistors are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the
Connection Solutions
Connection Solutions DESIGN BUILD SYSTEM Connection Solutions for Cold formed Steel Construction Complies with; AS/NZS 4600:2005 AISI S100:2007 AS/NZ 1397 ASTM A653 DESIGN & BUILD SYSTEM FRAMECAD Construction
Installation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
Carton - Straight Link Machine Chain (Order Unit is Feet )
Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),
European Technical Assessment ETA-15/0028 of 23/02/2015
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of
TG 105 ALLOWABLE PIPE SIZE, CLASS AND MATERIALS FOR WATER MAINS TECHNICAL GUIDELINE. Manager Asset Management SOUTH AUSTRALIAN WATER CORPORATION
TG 105 SOUTH AUSTRALIAN WATER CORPORATION TECHNICAL GUIDELINE ALLOWABLE PIPE SIZE, CLASS AND MATERIALS FOR WATER MAINS Issued by: Manager Asset Management Issue Date: SA WATER 2007 This document is copyright
Stainless steel flat products. Prodotti piani in acciaio inossidabile
St ai nl es ss t eel atpr oduc t s Moving ahead in the stainless sector. Within a strategy of consistent investments in its production chain, Marcegaglia has added the manufacturing of coils and sheets
THIRD PARTY INSPECTION GUIDELINES FOR OWNERS AND GENERAL CONTRACTORS/CONSTRUCTION MANAGERS DS150
THIRD PARTY INSPECTION GUIDELINES FOR OWNERS AND GENERAL CONTRACTORS/CONSTRUCTION MANAGERS DS150 SECTION ONE A. Objective The objective of this guide is to provide Owners and General Contractors/Construction
HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS
BSW HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side
Faces & Surfaces. Competence and Quality in Packaging Steel.
Faces & Surfaces. Competence and Quality in Packaging Steel. A company of ThyssenKrupp Steel ThyssenKrupp Rasselstein tk Who is behind it? 3 People make all the difference. When a company like Rasselstein
Assembly of LPCC Packages AN-0001
Assembly of LPCC Packages AN-0001 Surface Mount Assembly and Handling of ANADIGICS LPCC Packages 1.0 Overview ANADIGICS power amplifiers are typically packaged in a Leadless Plastic Chip Carrier (LPCC)
Series 456 Commercial Awning Window
Commercial Awning Window COMMERCIAL SERIES Photo courtesy of Hanlon Windows Australia DATE: MAY 2013 REPLACES: MARCH 2008 COMMERCIAL SERIES KEY FEATURES/PERFORMANCE CHARACTERISTICS Scale: not to scale
Puddle Flange. FRANK Puddle Flange
Puddle Flange FRANK Puddle Flange The problem Problems keep on occurring when connecting pipes during construction work. Pipes laid in the ground must be introduced into concrete walls or shafts. In many
Offering more. Series 3000 www.ripack.com
Offering more Series 3000 SAFE Prevent any burn risks and work in complete safety. With its unique, patented cold nozzle system, the gun remains cool during use. PRACTICAL Large, solid hanger ring. FAST
Understanding the Basics of Automatic Pressure-Sensitive Labeling Methods
Understanding the Basics of Automatic Pressure-Sensitive Labeling Methods William Claproth Director of Marketing Services Label-Aire, Inc. Pressure-sensitive label applicator featuring air-blow technology.
CONTENTS. General conditions 2. Material requirements 3. Terms 4. Estimating shingle requirements 4. Roof preparation 6. Shingle application 9 - 1 -
CONTENTS General conditions Material requirements 3 Terms 4 Estimating shingle requirements 4 Roof preparation 6 Shingle application 9 Shingle Shingle application application guide guide - - b a 3a 3b
Construction. Sikadur-Combiflex. Sealing system for cracks and problem joints with large movements DESCRIPTION
Sikadur-Combiflex REVISED JULY 2002 Sealing system for cracks and problem joints with large movements Construction DESCRIPTION USES ADVANTAGES The Sikadur-Combiflex joint sealing system consists of two
PRODUCTS. Stainless Steel (Ferritic & Austenitic) Aluminised Steel Mild Steel Titanium
S u p p l i e r s o f H i g h Q u a l i t y P e r f o r a t e d S t a i n l e s s S t e e l Tu b i n g THE COMPANY The Joint Perforating Company, established in 2001 has re-invented the perforating process.
THERMA-TUBE preinsulated pipes and fittings Catalogue of products
THERMA-TUBE preinsulated pipes and fittings Catalogue of products THERMA TUBE preinsulated pipes and fittings TABLE OF CONTENTS 1. GENERAL INFORMATION ABOUT THE USE OF PREINSULATED PIPES AND FITTINGS...
Flat Carbon Europe. Aluzinc in building
Flat Carbon Europe Aluzinc in building Aluzinc stands for aluminium and zinc, fused in almost equal proportions to coat the steel sheet with a unique silvery spangle, composed of aluminium (55%), zinc
Buyers Guide: Information required:
Buyers Guide: Information required: When ordering, please state: 1 Reference Number of Mesh (include any alphabetical suffix) Conventional/Flattened Mesh Dimensions: 1. For conventional (raised) meshes
Environmental Product Declaration EPD
Environmental Product Declaration EPD May 2014 EPD The company Europrofil AB, founded 1982, is the leading producer of light gauge steel profiles for the building construction industry. Headquarters and
Temperature C 10 15 23 40. Cure time to reach hours - - - - LSS > 1MPa minutes 20 12 8 2
Advanced Materials Araldite 2021 Structural Adhesives TECHNICAL DATA SHEET Araldite 2021 Two component toughened methacrylate adhesive system Key properties Rapid curing High peel strength Multi purpose
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
valid as of 1 April 2014 Fradiflex metal water stop
FRANK Product List valid as of 1 April 2014 Fradiflex metal water stop Fradiflex metal water stop Stremafl ex Controlled crack component Sealing of joints in concrete structures requires a very reliable
SKF Seals Knowledge Engineering. Designed to optimize machinery performance
SKF Seals Knowledge Engineering Designed to optimize machinery performance From moulding high quantities to mach Sealing for power transmission The performance and service life of a power transmission
General Allowances for Insulation & Cladding
TRADE OF Industrial Insulation PHASE 2 Module 1 Sheet Metal and Insulation Fundamentals UNIT: 4 General Allowances for Insulation & Cladding Produced by In cooperation with subject matter expert: Michael
Pipe Inspection Carbon Steel Trials
Pipe Inspection Carbon Steel Trials Client Innospection Limited Facility Head Office Aberdeen Item Inspected Pipe No 1 Inspection Method SLOFEC Date Commenced 01/01/2009 Date Completed 10/01/2009 Type
CM702 PROGRAMMABLE THERMOSTAT FEATURES PRODUCT SPECIFICATION SHEET
CM702 PROGRAMMABLE THERMOSTAT FEATURES Attractive slim, modern styling makes it ideal for location in any type of home. 24-hour heating program. Up to 4 daily independent time and temperature level changes
COIL PAC. Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: [email protected]
COIL PAC Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: [email protected] Description of the machine Coil Pac 240 und Coil Pac 400 are two types of
Sika Membran System For Sealing and Waterproofing Construction Gaps in Building Façades
Construction Sika For Sealing and Waterproofing Construction Gaps in Building Façades Waterproof and Airtight Flexible Seal Controlled Vapour Diffusion Bonds to any Building Substrate Prevents Interstitial
MoTeC USA GPS. Part # M GPS BL Available in 10 Hz or 20 Hz. USER MANUAL Version 1.4
MoTeC USA GPS Part # M GPS BL Available in 10 Hz or 20 Hz. USER MANUAL Version 1.4 MoTeC USA GPS Copyright Motec Systems USA 2008 The information in this document is subject to change without notice. While
Sun-Activ - reflective SBS membrane. Sun-Activ - White reflective bituminous waterproofing membrane for Cool Roof
Sun-Activ - reflective SBS membrane Sun-Activ - White reflective bituminous waterproofing membrane for Cool Roof Sun-Activ - reflective SBS membrane Icopal and the environment Icopal is committed to the
G VYCOR DECK PROTECTOR
G VYCOR DECK PROTECTOR Self-Adhered Flashing Contractor s Guide DECKS AND DETAIL AREAS For longer lasting decks, install Grace Vycor Deck Protector. FROM THE MAKERS OF G Ice & Water Shield What Self-Adhered
INSTALLATION RECOMMENDATIONS. Outdoor Rubber Tiles
INSTALLATION RECOMMENDATIONS Outdoor Rubber Tiles Prior to Installation: The Outdoor Rubber Tiles and accessory transition pieces intended for this installation have been shipped to you via a freight carrier
Radial Insert Ball Bearings Housing Units. Our Expertise is Your Benefit. Schaeffler Group Industrial
Radial Insert Ball Bearings Housing Units Our Expertise is Your Benefit Schaeffler Group Industrial A p p l i c a t i o n s Quality for every eventuality: Radial insert ball bearings in industry Radial
Installation instruction CASAFLEX - Connecting piece DN 100
1 CASAFLEX - 11 10 114,3 x 4,5 3 5 2 4 1 7 6 8 12 9 Do not begin work until you have read the installation instruction carefully. 1 internal backing sleeve 2 graphite packing 3 connecting piece 4 thrust
LK Wallbox UNI Push. Assembly. Only intended for LK PE-X Universal Pipe X.
LK Wallbox UNI Push Only intended for LK PE-X Universal Pipe X. LK Wallbox UNI Push 16 Single Article no. 188 06 38 LK Wallbox UNI Push 20 Single Article no. 188 06 39 LK Distance template LK Wallbox UNI
FAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
4 Installation Requirements
4 Installation Requirements 9 4.1 Code Reference The authority having jurisdiction should be referenced to determine what law, ordinance or code shall apply in the use of flexible duct. Ducts conforming
Portrait of a company. Rasselstein
Portrait of a company. Rasselstein A company of ThyssenKrupp Steel tk Rasselstein. Competence and quality in packaging steel. Maximum product quality for highest requirements and extensive technical customer
Homemade Snowshoes. http://myweb.cableone.net/bcanderson/snowshoes/snowshoes.html
Page 1 of 16 Homemade Snowshoes After losing out on a good deal for a commercial set of snowshoes, I decided to make my own. Searching the internet, I found David Fifield's plans for Homemade Snowshoes.
style guide jewels HOW TO STYLE THE PROFILE CORNER IN THE A, B, C POSITION THE STARTKIT FOR PROFILE CORNER CONSISTS OF
136 STYLE GUIDE / JEWELS JEWELS / STYLE GUIDE 137 style guide jewels HOW TO STYLE THE PROFILE CORNER IN THE A, B, C POSITION THE STYLE GUIDE FOR JEWELLERY: Each satellite can be styled in both silver and
12.1 Schlüter -KERDI-BOARD
I n n o v a t i v e p r o f i l e s 12.1 Schlüter -KERDI-BOARD S u b s t r a t e U N I V E R S A L S T R U C T U R A L P A N E L, B O N D E D W A T E R P R O O F I N G Application and Function Schlüter
Enlarge your business with Ricoh.
Enlarge your business with Ricoh. The new Ricoh Pro L4100 series with aqueous durable (latex) inks. RICOH Pro L4100 series 18.2 m 2 /h Your ideal way into large-format. The new Ricoh Pro L4100 series is
B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN
No. of Printed Pages : 7 BAS-01.0 B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) CV CA CV C:) O Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN Time : 3 hours Maximum Marks : 70 Note : (1)
1.1.2 Polypropylene The polypropylene must be a white opaque film, 1 2 mil thick. Biaxial orientation is preferred.
Library of Congress Preservation Directorate Specification Number 700 704 09 Specifications for Pressure Sensitive Adhesive Labels For Application to Single Paper Sheets and Text Pages of Bound Books For
ArcelorMittal Poland 03.06.2014
ArcelorMittal Poland 03.06.2014 ArcelorMittal Poland 6 locations 5 steel plants and the largest coke plant in Europe located in Zdzieszowice 70 per cent of Polish steel market potential Over 11.000 employees,
Valve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
SIGRAFLEX EMAIL. Properties. Applications
Multilayer sealing sheet, adhesive-free made from flexible graphite foil reinforced with stainless steel foils especially for use in PTFE envelope gaskets SIGRAFLEX EMAIL has been developed specially for
Repair of Hyd-ro-ac Actuators
Repair of Hyd-ro-ac Actuators OVERHAUL INSTRUCTIONS SS-.2A-1V SS-.5A-1V SS-.5A-2V Read the entire contents of these instructions before installing the actuator and before making any connections to the
7.3 Fit selection. Inner ring: Rotating. Outer ring: Stationary. Inner ring: Stationary. Outer ring: Rotating. Inner ring: Stationary
7. Bearing Fits 7. Fitting For rolling s, inner and outer rings are fixed on the or in the housing so that relative movement does not occur between fitting surfaces during operation or under. This relative
VdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)
VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
How to build a Pizza Oven in 4 days
How to build a Pizza Oven in 4 days Preparation day (slab) 1. Foundation 1500 deep x 1300 wide x 75mm deep Required 20 bags cement pre mix. If you already have a concrete base, you save this prep day DAY
QUANTIFYING SOLAR ENERGY
www.sustainicum.at QUANTIFYING SOLAR ENERGY Recommendations for implementation in the course Author: E-Mail address: Institution: Philipp Weihs [email protected] BOKU Important considerations Very
TEST REPORT. Rendered to: DEXERDRY. For: Deck Weatherproofing System Installed with AZEK Deck Boards
TEST REPORT Rendered to: DEXERDRY For: Deck Weatherproofing System Installed with AZEK Deck Boards Report No.: E8122.01-119-19 Revision 1: 08/18/15 Report Date: 08/14/15 Test Record Retention Date: 07/16/19
ALKALI-RESISTANT WATERPROOFING AND DECOUPLING MEMBRANE UNDER CERAMIC TILES AND NATURAL STONE
Mapeguard WP System ALKALI-RESISTANT WATERPROOFING AND DECOUPLING MEMBRANE UNDER CERAMIC TILES AND NATURAL STONE Products used: Mapeguard WP 200, Mapeguard ST, Mapeguard IC, Mapeguard EC, Mapeguard WP
BUILD A CARPORT. 2 - Planning the carport. 3 - Designing the carport
BUILD A CARPORT You only need basic DIY and woodworking skills to build a carport. The most important part of the job is setting the supporting posts truly vertical - a job for which another pair of hands
COATING & WRAPPING OF UNDERGROUND PIPING
CONSTRUCTION STANDARD SPECIFICATION DOCUMENT NO :SEC-PJ-000-SPC-PI-008 TOTAL PAGES : 8 Page 1 of 8 CONTENTS 1. SCOPE 2. DEFINITION 3. CODES AND STANDARDS 4. MATERIALS Page 2 of 8 1. SCOPE This specification
INDEX. Chapter8. air master. Perforated Ceiling Diffusers
Chapter8 INDEX A. Perforated ceiling diffuser 1. Perforated ceiling diffuser with plenum box..: APCD+P...8.1. Perforated ceiling diffuser with damper....: APCD...8. Standard sizes...8. Fixing details...8.
CataLoG No. weight o.d. i.d. GLaSSwaRe
Lead weights with Vikem Vinyl Coating Protect and Stabilize Expensive Glassware Stabilizes vessels in water baths and on benchtops Added insurance against tipping and possible chemical spills Closed ring
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
Interlocking Seasons Quilt Block Tutorial Version 1.1
Interlocking Seasons Quilt Block Tutorial Version 1.1 This 12.5 x 12.5 block will require 6 different fabrics; 4 for the outer rings, 1 for center ring, and 1 for background. Outer Rings (For each of the
peel adhesion 2 breaking load 4 rolling ball 6 shear adhesion 7 carton test 9 summary test methods 11
CONTENT peel adhesion 2 breaking load 4 rolling ball 6 shear adhesion 7 carton test 9 summary test methods 11 PEEL ADHESION Testing the peel adhesion on stainless steel 1. Definition Peel adhesion - The
sound reduction systems for commercial, educational and industrial environments
sound reduction systems for commercial, educational and industrial environments Tel: +44 ()14 3874 Fax: +44 ()14 38957 E-mail: [email protected] Web: www.soundreduction.co.uk soundblocker Acoustic
Road Regulations. Regulations for External Road Transport of Steel Products
Road Regulations Regulations for External Road Transport of Steel Products Tata Steel Mainland Europe Revision 5.0 EN Logistics & Transport - Outbound Department Date : 01/08/2011 Valid until 01/08/2013
Metal Pressfitting Pipe Systems
VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing
GENERAL RUBBER LINING PRINCIPLES
GENERAL RUBBER LINING PRINCIPLES I. METAL PREREQUISITES Metal to be lined should meet the requirements as stated in section 8 Metal Fabrication and section 12 Blasting and Cementing Procedures. The surface
Journal bearings/sliding bearings
Journal bearings/sliding bearings Operating conditions: Advantages: - Vibration damping, impact damping, noise damping - not sensitive for vibrations, low operating noise level - dust tight (if lubricated
SUBMITTING A PRESS-READY COVER For Paperback Books with Perfect Binding, Plastic Comb, and Plastic Coil Binding
For Paperback Books with Perfect Binding, Plastic Comb, and Plastic Coil Binding Press-Ready Material We will only accept a digital file for a press-ready cover. The file must be print-ready with no typesetting
Standard Operating Procedures 4ft Muscle Wall
Standard Operating Procedures 4ft Muscle Wall Primary Containment Standard Operating Procedures Page 2 of 11 Table of Contents Page 4 Page 3 Page 7 Page 5 Page 10 Specifications Items Needed Stage 1: Liner
Suggested PCB Land Pattern Designs for Leaded and Leadless Packages, and Surface Mount Guidelines for Leadless Packages
APPLICATION NOTE Suggested PCB Land Pattern Designs for Leaded and Leadless Packages, and Surface Mount Guidelines for Leadless Packages Introduction This Application Note provides sample PCB land pattern
ThyssenKrupp Rasselstein
Quality begins with ThyssenKrupp Rasselstein Product Range ThyssenKrupp Rasselstein Your Quality Partner Page 2 ThyssenKrupp Rasselstein Product Range Quality begins with ThyssenKrupp Rasselstein ThyssenKrupp
T A B L E T 1 T E S T S A N D I N S P E C T I O N C A B L E P C U T A N D P C U T - A
T A B L E T 1 1 of 7 Tests & Inspection Cable PCUT & PCUT-A (Table T1) T E S T S A N D I N S P E C T I O N C A B L E P C U T A N D P C U T - A No. Test Scale MOC Requirements G 20:10:001:01 Defined Test
Certificate of shape stability
1. 2. 3. 4. 5. 6. Ref. transp. packaging unit: Certificate of shape stability Ref. measuring report: Deltarack - 20120810002 Company: Deltarack Performed test: Acceleration test according to: Be RD of
Removable Insulation Blankets from A to Z
Removable Insulation Blankets from A to Z At first glance, making up a removable insulation blanket seems somewhat simple take some insulation, put some mesh on one side, a cover on the other, sew them
Section 5: Machine Overview
Section 5: Machine Overview Machine Floor Plan Machine Specifications Sequence of Operation Theory of Operation Sensor Location Floor Plan 2007 Douglas Machine Inc. 5.1 Machine Floor Plan Figure 5.1: Machine
Table of Contents. Western States RustWall Wall and Soffit Panels Installation, Flashings & Shop Drawing Detail Guide
Western States RustWall Wall and Soffit Panels Installation, Flashings & Shop Drawing Detail Guide Table of Contents Section Page Section Page Notes to Designer /Installers.. 1 Fastener Placement and Selection.2-3
Table of Contents. Western States Standing Seam SS675 Panel Installation, Flashings & Shop Drawing Detail Guide. Notes to Designer /Installers..
Western States Standing Seam SS675 Panel Installation, Flashings & Shop Drawing Detail Guide Table of Contents Section Page Section Page Notes to Designer /Installers.. 1 Fastener Placement and Selection.2-3
Black epoxy paste adhesive system
Advanced Materials Araldite 2031 Structural Adhesives Araldite 2031 Black epoxy paste adhesive system Key properties Thixotropic non slumping Toughened adhesive, resilient bond Suitable for metal and composite
CI SfB. (4-) Nn2. Onduline. Mini Profile. Onduline Garden Roof Range. Onduline Building Products Ltd
CI SfB (4-) Nn2 Onduline Mini Profile Onduline Garden Roof Range Onduline Building Products Ltd Onduline Garden Roof Range Onduline Mini Profile The new Onduline Mini Profile sheets have been designed
Playing in a 4-4-2 (Diamond Midfield)
Playing in a 4-4-2 (Diamond Midfield) GK CD CD RD LD DM RM LM OM Playing against a 4-4-2 flat 4 defenders 4 midfielders 2 forwards Mirror image on both sides of field Formation adds 1 player to the defensive
Technical catalogue panel radiators POLAND 2014
Technical catalogue panel radiators POLAND 2014 2 table of contents panel radiators overview...4 panel radiators overview... 88 Compact... 10 Ventil Compact 200 mm... 91 Ventil Compact... 16 Plan Ventil
PRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE. By H P Gupta & D K Gupta
PRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE By H P Gupta & D K Gupta DIFFERENT TYPES OF DAMAGES 1.Minor cracks 0.5 to 5 mm wide in load or non-load bearing walls 2.Major
SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE
SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel