AIR-TO-WATER HEAT PUMP (50Hz/R410A) 5BPU0-03A(Replace:5BPU0-02A)

Transcription

1 AIR-TO-WATER HEAT PUMP (50Hz/R410A) 5BPU0-03A(Replace:5BPU0-02A)

2 AIR-TO-WATER HEAT PUMP (50Hz/R410A) 5BPU0-03A(Replace:5BPU0-02A)

3 CONTENTS Part 1. Introduction Part 2. Indoor Unit(Hydro kit) Part 3. Outdoor Unit Part 4. Accessories

4 Guide Revision History Pub. No. Frequency Type Product name Refrigerant Models Notes Published in 5BPU0-01A 50Hz Air to Water Heat Pump Therma V R410A AHUW096A1 (HU091 U41) AHUW128A1 (HU123 U31) AHUW148A1 (HU143 U31) AHUW168A1 (HU163 U31) New edition of EPDB (Preliminary Version) July BPU0-02A 50Hz Air to Water Heat Pump Therma V R410A AHUW126A1 (HU121 U31) AHUW146A1 (HU141 U31) AHUW166A1 (HU161 U31) Added outdoor unit model April BPU0-03A 50Hz Air to Water Heat Pump Therma V R410A AHNW09606A1(HN0916 NK1) AHNW09A06A1(HN0926 NK1) AHNW09806A1(HN0936 NK1) Added indoor unit model June Air-to-Water Heat Pump _ 3

5 Part 1. Introduction 1. System Configuration 2. System Layout 3. Features 4. Advantages & Benefits 5. System Application Schematic Examples

6 1. System Configuration LG Supply Indoor Unit(Hydro kit) Outdoor Unit Introduction Radiator or Sanitary tank(only) or Sanitary tank + Solar heat source Fan coil unit Under floor pipe Field supply Refer to the installation manual regarding various applications in detail Air-to-Water Heat Pump _ 1

7 2. System Layout Introduction Outdoor Unit Refrigerant (R410A) Indoor Unit (Hydro kit) Water 9kW Hydro kit 12/14/16kW Heat exchange between Refrigerant and Water Internal electric heater Boiler can be interlocked Sanitary water tank (+ Solar heat source) Floor Heating Radiator or Fan coil unit Sanitary water tank Solar heat source Under floor pipe Radiator Fan coil unit Refer to the installation manual regarding various applications in detail 2 _ Air-to-Water Heat Pump

8 3. Advantages & Benefits Central Control Introduction Air-to-Water Heat Pump VRF System Heat recovery Ventilation system Air-to-Water Heat Pump _ 3

9 3. Advantages & Benefits Emergency Control Easy checking of system failure Introduction Slight trouble Heavy trouble - Slight / Heavy trouble Emergency operating - Heavy trouble - Electric heater ON - Secure at least heating before A/S Easy Setting Feature Water Inlet temp. Water Outlet temp. Water Tank temp. Space temp. Solar Heating temp. Indoor temp. or Water temp. (Optional temp. setting) 4 _ Air-to-Water Heat Pump

10 3. Advantages & Benefits Controller Configuration 1 Display Panel Change Temperature Button Silent Mode On / Off Button Mode Selection Button Water Heating Enable / Disable Button ESC Button Introduction Direction Button (Up, Down, Left, Right) Power Button Function Setting Button Temperature Setting Mode Button Temperature View Mode Button Programming Button Set / Clear button Display Panel Cooling Heating Weather-dependent Heating Space Temp. Water Inlet Temp. Water Outlet Temp. Central Controller Thermostat Electric Heater (1) Electric Heater (2) Water Tank Electric Heater Water Pump Solar Heating Pump Water Tank Heating Enable / Disable Water Tank Heating (by Heat Pump) Silent Mode ON / OFF Water Tank Temp. Solar Heating Temp. Defrost Water-Pipe Anti-Freezing Water Tank Disinfection Outdoor Unit Child Lock Not Available Function Slight Trouble Heavy Trouble Air-to-Water Heat Pump _ 5

11 3. Advantages & Benefits Introduction 3.1 More Ecological Background for EU regulations... A. To preserve, protect and improve the quality of the environment, protect human health and utilise natural resources prudently and rationally B. Basic principle = preventive action, environmental damage should be rectified at source and the polluter should pay C. If waste cannot be avoided, it should be reused or recovered for its material or energy. LGE Environmental Policy ; LG Electronics has finalized the development strategy with the following goals to develop eco-friendly products to meet a range of environmental challenges and secure Advanced production technology 3 key Eco-design strategies LGE RoHS management ; Declared eliminating the six hazardous substances specified in the EUʼs RoHS Directive (Pb, Cd, Cr6+, HG, PBBs, PBDEs) from all LGEʼs products in July * RoHS : Restriction of Hazardous Substances LGE ECO-friendly Activity ; We are operating a special lab for analyzing Hazardous substance. - Fully equipped with precision analysis instruments such as ICP, IC, GC-MS, FR-IR - Developed and standardized methods to analyze and test hazardous substance - Certified as an official lab by the UL (Underwriters Laboratories) in February 2005, and by TÜV Rheinland in May Participating in the assessment done by external organizations - Enhancing the reliability of internal analysis through regular assessment of skills, education, workshops and six sigma activities 6 _ Air-to-Water Heat Pump

12 4. System Application Schematic Examples 4.1 Connecting Heat Emitters for Heating and Cooling (Under floor loop, Fan Coil Unit, and Radiator) Outdoor Unit Outdoor Indoor Indoor Unit Introduction NOTE Fan coil unit Floor heating loop Radiator Room thermostat - Type of thermostat and specification should be complied with chapter 4 and chapter 7 of THERMA V installation manual. 2way control valve - It is important to install 2way control valve to prevent dew condensation on the floor and radiator while cooling mode. - Type of 2way control valve and specification should be complied with chapter 4 and chapter 7 of THERMA V installation manual. - 2way valve should be installed at the supply side of the collector. By-pass valve - To secure enough water flow rate, by-pass valve should be installed at the collector. - By-pass valve should guarantee minimum water flow rate in any case. Minimum water flow rate is described in water pump characteristics curve. High Temperature Low Temperature Shut-off valve Room Thermostat(Field supply) 2way control valve(field supply) By-pass valve(field supply) CAUTION If is installed with pre-existing boiler, the boiler and should not be operated together. If entering water temperature of is above 55 C, the system will stop operation to prevent mechanical damage of the product. For detailed electric wiring and water piping, please contact authorized installer. Some installation scenes are presented for example. As these scenes are conceptual figures, installer should optimize the installation scene according to the installation conditions. Air-to-Water Heat Pump _ 7

13 4. System Application Schematic Examples 4.2 Connecting Sanitary Water Tank Introduction Outdoor Unit Outdoor Indoor Indoor Unit Fan coil unit Floor heating loop Radiator Hot water City water Sanitary water tank NOTE Sanitary water tank - It should be equipped with internal electric heater to generate sufficient heat energy in very cold season. 3way control valve - Type of 3way control valve and specification should be complied with chapter 4 and chapter 7 of installation manual. High Temperature Low Temperature Shut-off valve Room Thermostat(Field supply) 2way control valve(field supply) By-pass valve(field supply) 3way control valve (Field supply) CAUTION If is installed with pre-existing boiler, the boiler and should not be operated together. If entering water temperature of is above 55 C, the system will stop operation to prevent mechanical damage of the product. For detailed electric wiring and water piping, please contact authorized installer. Some installation scenes are presented for example. As these scenes are conceptual figures, installer should optimize the installation scene according to the installation conditions. 8 _ Air-to-Water Heat Pump

14 4. System Application Schematic Examples 4.3 Connecting Solar thermal system Outdoor Unit Outdoor Indoor Indoor Unit Introduction Solar heat source Fan coil unit Floor heating loop Radiator Hot water Sanitary water tank City water NOTE Sanitary water tank - It should have additional indirect heat exchanger to utilize heat energy by solar thermal system. Pump - Maximum power consumption of pump should be less than 0.25kW. High Temperature Low Temperature Shut-off valve Room Thermostat(Field supply) 2way control valve (Field supply) By-pass valve(field supply) 3way control valve (Field supply) Pump(Field supply) CAUTION If is installed with pre-existing boiler, the boiler and should not be operated together. If entering water temperature of is above 55 C, the system will stop operation to prevent mechanical damage of the product. For detailed electric wiring and water piping, please contact authorized installer. Some installation scenes are presented for example. As these scenes are conceptual figures, installer should optimize the installation scene according to the installation conditions. Air-to-Water Heat Pump _ 9

15 Part 2. Indoor Unit (Hydro kit) 1. Nomenclature 2. Model Line-up 3. List of Functions 4. Specifications 5. Dimensions 6. Wiring Diagrams 7. External Wiring Diagrams 8. Piping Diagrams 9. Pump Hydraulic Performance

16 1. Nomenclature 1.1 Global Model Name AH N W 16 A 06 A 1 Serial Number Chassis Name Heater Capacity (kw) Ex) 06 : 6kW Class Heater Electrical Ratings 6 : 1 phase V 50Hz 8 : 3 phase V 50Hz A : 3 phase 220V 50Hz Heating Capacity (kw) Ex) 16 : 16kW Class 1.2 Europe Model Name Model Type W : DC Inverter Heat Pump H : Heat Pump Classification N : Indoor Unit U : Outdoor Unit - : Set Air-to-Water Heat Pump for R410A Indoor Unit H N Heater Capacity (kw) Ex) 04 : 4kW Class 06 : 6kW Class 09 : 9kW Class Electrical Ratings 1 : 1 Phase V 50Hz 2 : 3 Phase 220V 50Hz 3 : 3 Phase V 50Hz Classification 09 (Combined with 09kW of Outdoor Unit) 16 (Combined with 12/14/16kW of Outdoor Unit) N : Hydro kit (Indoor Unit) H : Air to Water Heat Pump Air-to-Water Heat Pump _ 1

17 2. Model Line-up 2.1 Hydrokit Indoor Unit Model Name AHNW09604A1 (HN0914 NK1) AHNW09606A1 (HN0916 NK1) AHNW09A06A1 (HN0926 NK1) AHNW09806A1 (HN0936 NK1) AHNW16606A1 (HN1616 NK1) AHNW16A06A1 (HN1626 NK1) AHNW16806A1 (HN1636 NK1) AHNW16A09A1 (HN1629 NK1) AHNW16809A1 (HN1639 NK1) Electric Heater Capacity(kW) Power Source (Electric Heater) 4(2+2) 1Ø, V, 50Hz 6(3+3) 6(2+2+2) 1Ø, V, 50Hz 3Ø,220V, 50Hz 3Ø, V, 50Hz 6(3+3) 1Ø, V, 50Hz 6(2+2+2) 9(3+3+3) 3Ø, 220V, 50Hz 3Ø, V, 50Hz 3Ø, 220V, 50Hz 3Ø, V, 50Hz 2.2 Outdoor Unit Model Name AHUW096A1 (HU091 U41) AHUW126A1 (HU121 U31) AHUW146A1 (HU141 U31) AHUW166A1 (HU161 U31) AHUW128A1 (HU123 U31) AHUW148A1 (HU143 U31) AHUW168A1 (HU163 U31) Capacity Cooling (kw) Heating (kw) Power Source 1Φ, V, 50Hz 3Φ, V, 50Hz 2 _ Air-to-Water Heat Pump

18 3. List of Functions Category Installation Reliability Convenience Individual control CAC network function Special function kit Others AWHP Function Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Standard wired remote controller(control panel) Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control General central controller (Non LGAP) Dry contact Network Soluation(LGAP) PDI(power distribution indicator) PI 485 Zone control CTIE Electro thermostat Remote room temperature sensor (TH8) Anti-Condensation on floor (cooling) Water Pump ON / OFF Control Flow Switch Control Thermostat Interface (230V AC) Thermostat Interface (24V AC) Sanitary Tank Heating Solar-Thermal Interface with Sanitary Tank PHEX Anti-Freezing Control Water Pump Forced Operation Autosetting according to Ambient Temperature Silent Operation Anti-overheating of Water Pipe Emergency Operation AHNW166**A1 (HN161* NK1) AHNW168**A1 (HN163* NK1) AHNW16A**A1 (HN162* NK1) PQDSA PQDSA PQDSA PQRSTA0 PQRSTA0 PQRSTA0 Indoor Unit Notes O : Applied, X : Not applied, : No relation * TH8 : Refer to 'Chapter 8. Piping Diagram' of 'Part 2. Indoor Unit (Hydro kit)' * Accessory: Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package. Air-to-Water Heat Pump _ 3

19 3. List of Functions Indoor Unit Category Installation Reliability Convenience Individual control CAC network function Special function kit Others AWHP Function Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Standard wired remote controller(control panel) Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control General central controller (Non LGAP) Dry contact Network Soluation(LGAP) PDI(power distribution indicator) PI 485 Zone control CTIE Electro thermostat Remote room temperature sensor (TH8) Anti-Condensation on floor (cooling) Water Pump ON / OFF Control Flow Switch Control Thermostat Interface (230V AC) Thermostat Interface (24V AC) Sanitary Tank Heating Solar-Thermal Interface with Sanitary Tank PHEX Anti-Freezing Control Water Pump Forced Operation Autosetting according to Ambient Temperature Silent Operation Anti-overheating of Water Pipe Emergency Operation AHNW09604A1 (HN0914 NK1) AHNW09606A1 (HN0916 NK1) AHNW09A06A1 (HN0926 NK1) AHNW09806A1 (HN0936 NK1) O O O O O O O PQDSA PQDSA PQDSA PQDSA O PQRSTA0 PQRSTA0 PQRSTA0 PQRSTA0 O O O O O O O O O O O O O Notes O : Applied, X : Not applied, : No relation * TH8 : Refer to 'Chapter 8. Piping Diagram' of 'Part 2. Indoor Unit (Hydro kit)' * Accessory: Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package. 4 _ Air-to-Water Heat Pump

20 4. Specifications Indoor Units Nominal Power Input W Nominal Running Current without Electric Heater A Operation Range Cooling(Fan coil unit) C (Min.~Max.) Cooling(Under floor) C Leaving Water Heating(Fan coil unit or Radiator) C Temperature Heating(Under floor) C Pump Type - Steps of Speed EA Power Input W Water Flowrate Limit LPM Heat Exchanger Type - Number of Plate EA Quantity EA Expansion Vessel Volume liter Water Pressure(Max.) bar Water Pressure(Pre) bar Strainer Mesh Size mm Material - Electric Heater Type - Number of Heating Coil EA Capacity Combination kw Operation - Heating Steps Step Power Supply Ø / V / Hz Rated Current A Maximum Current(MCA) A Water Circuit Safety Valve bar Entering Side Diameter inch Leaving Side Diameter inch Manometer - Drain Valve / Fill Valve - Shut Off Valve - Air Vent - Refrigerant Circuit Gas Side Diameter mm(inch) Liquid Side Diameter mm(inch) Dimensions Unit(H x W x D) mm Packed Unit(H x W x D) mm Weight Unit kg (Without water) Packed Unit kg Sanitary Water Tank Type - Heater Capacity kw Power Supply Ø / V / Hz Power Supply Type - Thermal Protector Range C Relay Contactor - ELB A Sensor Adaptor Diameter mm(inch) Accessory Kit - AHNW166**A1 (HN161* NK1) AHNW168**A1 (HN163* NK1) AHNW16A**A1 (HN162* NK1) ~ 30 6 ~ 30 6 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 55 Canned type for hot water circulation 2 (In Max. / Med. / Min., Min. step is not used) At least 15.0 At least 15.0 At least 15.0 Brazed Plate HEX Brazed Plate HEX Brazed Plate HEX x 1 1 x 1 1 x 1 Stainless Steel Stainless Steel Stainless Steel Sheath Sheath Sheath or 9 6 or 9 Automatic Automatic Automatic / / 50 3 / / 50 3 / 220 / Male PT 1 Male PT 1 Male PT 1 Male PT 1 Male PT 1 Male PT (5/8) (5/8) (5/8) 9.52 (3/8) 9.52 (3/8) 9.52 (3/8) 850 x 490 x x 490 x x 490 x x 563 x x 563 x x 563 x Indirect heating(+ Electric heater) Max. 3 1 / 230 / 50 Separated power source Max. 90 Needed (1/2) LG Supply(model : PHLTA) Indoor Unit Note : 1. The specification may be subject to change without prior notice for purpose of improvement. Air-to-Water Heat Pump _ 5

21 4. Specifications Indoor Unit Indoor Units Nominal Power Input W Nominal Running Current without Electric Heater A Operation Range Cooling(Fan coil unit) C (Min.~Max.) Cooling(Under floor) C Leaving Water Heating(Fan coil unit or Radiator) C Temperature Heating(Under floor) C Pump Type - Steps of Speed EA Power Input W Water Flowrate Limit LPM Heat Exchanger Type - Number of Plate EA Quantity EA Expansion Vessel Volume liter Water Pressure(Max.) bar Water Pressure(Pre) bar Strainer Mesh Size mm Material - Electric Heater Type - Number of Heating Coil EA Capacity Combination kw Heating Steps Step Power Supply Ø / V / Hz Maximum Current(MCA) A Water Circuit Safety Valve bar Entering Side Diameter inch Leaving Side Diameter inch Manometer - Drain Valve / Fill Valve - Shut Off Valve - Air Vent - Refrigerant Circuit Gas Side Diameter mm(inch) Liquid Side Diameter mm(inch) Dimensions Unit(H x W x D) mm Packed Unit(H x W x D) mm Weight Unit kg (Without water) Packed Unit kg Sanitary Water Tank Type - Heater Capacity kw Power Supply Ø / V / Hz Power Supply Type - Thermal Protector Range C Relay Contactor - ELB A Sensor Adaptor Diameter mm(inch) Accessory Kit - MCCB A AHNW09604A1 (HN0914 NK1) AHNW09606A1 (HN0916 NK1) AHNW09A06A1 (HN0926 NK1) AHNW09806A1 (HN0936 NK1) ~30 16~30 15~55 15~55 Canned type for hot water circulation 2 (In Max. / Med. / Min., Min. step is not used) 135 At least 15 LPM Blazed Plate HEX x 1 Stainless Steel Sheath Sheath Sheath Sheath / / 50 1 / / 50 3 / 220 / 50 3 / / Male PT 1 Male PT 1 O O O O (5/8) 9.52 (3/8) 850 x 490 x 315 1,032 x 563 x Indirect heating (+ Electric heater) Max. 3 1/ 230 / 50 Separated power source Max. 90 Needed (1/2) LG Supply 32 Note : 1. The specification may be subject to change without prior notice for purpose of improvement. 6 _ Air-to-Water Heat Pump

22 5. Dimensions 5.1 Internal [Unit:mm] AWHP AHNW09***A1 (HN09** NK1) AHNW16***A1 (HN16** NK1) No Name Remarks 1 Refrigerant Pipe Ø15.88mm 2 Refrigerant Pipe Ø9.52mm 3 Entering Water Pipe Male PT 1 inch 4 Leaving Water Pipe Male PT 1 inch 5 Control Panel Built-in Remote Controller 6 Water Pump Max Head 7.5 / 6.5 meter 7 Safety Valve Open at water pressure 3 bar 8 8' Thermal switch Thermal switch Cut-off power input to electric heater at 90 centigrade (manual return at 55 centigrade) 9 Control Box PCB and terminal blocks 10 Flow Switch Minimum operation range at 12 LPM 11 Plate Heat Exchanger Heat exchange between refrigerant and water 12 Pressure Gage Indicates circulating water pressure 13 Expansion Tank Absorbing Volume change of heated water 14 Air Vent Air purging when Charging water 15 Electric Heater Additional heating source 16 Strainer 17 Shut-off valve 18 Carrying handle Cut-off power input to electric heater at 90(primary) and 200(secondary) centigrade (auto return at 70 centigrade for first thermal switch) Filtering and stacking particles inside circulating water When connecting water pipes,drain water or block the flow from indoor unit To carry the product Notice : Item 8 and Item 8 will be applied exclusively Note 1. Unit should be installed in compliance with the installation manual in the product box. 2. Unit should be grounded in accordance with the local regulations or applicable national codes. 3. All electrical components and materials to be supplied on the site must comply with the local regulations or international codes. 4. Electrical characteristics chapter should be considered for electrical work and design. Especially the capacity of power cable and circuit breaker for outdoor unit should be more than that of electrical characteristics chapter. Hydro kit Indoor Unit Air-to-Water Heat Pump _ 7

23 5. Dimensions 5.2 External [Unit:mm] Indoor Unit AWHP AHNW09***A1 (HN09** NK1) AHNW16***A1 (HN16** NK1) No Name Remarks 1 Door Control panel is shown after this door is opened. 2 Handle Used to cover or uncover the front case Note 1. Unit should be installed in compliance with the installation manual in the product box. 2. Unit should be grounded in accordance with the local regulations or applicable national codes. 3. All electrical components and materials to be supplied on the site must comply with the local regulations or international codes. 4. Electrical characteristics chapter should be considered for electrical work and design. Especially the capacity of power cable and circuit breaker for outdoor unit should be more than that of electrical characteristics chapter. Hydro kit 8 _ Air-to-Water Heat Pump

24 6. Wiring Diagrams AHNW**6**A1 (HN**1* NK1) Indoor Unit Air-to-Water Heat Pump _ 9

25 6. Wiring Diagrams AHNW**A**A1 (HN**2* NK1) AHNW**8**A1 (HN**3* NK1) Indoor Unit 10 _ Air-to-Water Heat Pump

26 7. External Wiring Diagrams AHNW**6**A1 (HN**1* NK1) Indoor Unit Air-to-Water Heat Pump _ 11

27 7. External Wiring Diagrams AHNW**A**A1 (HN**2* NK1) AHNW**8**A1 (HN**3* NK1) 1~ 230V 50Hz M/C 3 MCCB M/C Indoor Unit 3~ 220V 50Hz MCCB M/C 12 _ Air-to-Water Heat Pump

28 8. Piping Diagrams AHNW*****A1 (HN**** NK1) Sanitary water tan k is installed (Sanitary water tan k kit is necessary) Solar thermal syst em is connected (Solar thermal kit i s necessary) Indoor Unit Basic installation (IDU + ODU) Underfloor Heating Radiator Fan Coil Unit Solar Thermal Componets Air-to-Water Heat Pump _ 13

29 8. Piping Diagrams Indoor Unit Category Symbol Meaning PCB Connector Remarks TH1 TH2 TH3 Refrigerant temperature sensor (Gas side) Refrigerant temperature sensor (Liquid side) Entering Water temperature sensor CN_PIPE/OUT CN_PIPE TH4 TH5 Interim Water temperature sensor Leaving Water temperature sensor CN_TH3 F/S Flow Switch CN_FLOW1 Indoor Unit Water Heating Solar Heating E/HT W_PUMP1 EXP/TANK TH8 CTR/PNL 2WAY V/V_1 W/TANK B/HT 3WAY V/V_1 CITY WATER SHOWER TH6 TH7 3WAY V/V_2 W_PUMP/2 SOLAR THER- MAL SYSTEM Electric Heater Internal Water Pump Expansion Tank Remote Air temperature sensor Control Panel (or Remote Controller ) To control water flow for Fan Coil Unit Sanitary Water Tank Electric Heater - Flow control for water which is leaving from indoor unit. - Flow direction switching between underfloor and water tank Water to be heated by Indoor unit and B/HT of W/TANK Water supplied to end-user W/TANK water temperature sensor Solar-heated water temperature sensor - Flow control for water which is heated and circulated by SOLAR THERMAL SYSTEM. - Flow direction switching between SOLAR THERMAL SYSTEM and W/TANK External Water Pump - This system can include following components : Solar panel, Sensors, Thermostats, Interim heat exchanger, Water pump, etc. - To utilized hot water heated by SOLAR THERMAL SYSTEM, end-user must by LG AWHP Solar-Kit. CN_E/HEAT(A) CN_E/HEAT(B) CN_W/PUMP(A) (no connector) CN_ROOM CN_REMO CN_2WAY(A) (no connector) CN_B/HEAT(A) CN_3WAY(A) (no connector) (no connector) CN_TH4 CN_3WAY(B) CN_W/PUMP(B) (no connector) - Meaning is expressed based on Cooling mode. - TH3, TH4, and TH5 are connected at 6 pin type connector CN_TH3. - Heating capacity is divided into two level : partial capacity by E/HEAT(A) and full capacity by E/HEAT(A) + E/HEAT(B). - Operating power(230v AC 50Hz) of E/HEAT(A) and E/HEAT(B) are supplied by external power source via relay connector and ELB. - Operating power(230v AC 50Hz) of internal water pump is supplied by the connector. - Absorb volume change of heated water, - Optional accessory (sold separately) - Model : PQRSTA0 - Pre built-in at indoor unit - 3rd party accessory and Field installation (sold separately) - 2wire NO or NC type 2way valve is supported. - 3 rd party accessory and Field installation (sold separately) - Generating and storing sanitary hot water by AWHP or built-in electric heater- - 3 rd party accessory and Field installation (usually built-in at W/TANK) - Supplying additional water heating capacity. - 3 rd party accessory and Field installation (sold separately) - SPDT type 3way valve is supported. - Field installation - Field installation - TH6 and TH7 are connected at 4 pin type connector CN_TH4. - TH6 is a part of sanitary water tank kit. (model: PHLTA) - TH7 is a part of solar thermal kit (model: PHLLA) - 3 rd party accessory and Field installation (sold separately) - SPDT type 3way valve is supported. - 3 rd party accessory and Field installation (sold separately) - If water pump of SOLAR THERMAL SYSTEM is incapableof circulation,external water pump can be used. - 3 rd party accessory and Field installation (sold separately) 14 _ Air-to-Water Heat Pump

30 9. Pump Hydraulic Performance 9.1 Static Pressure Drop Model : AHNW09***A1 (HN09** NK1) Hydraulic Head Loss(mH2O) Med. 1.5 Max Water Flowrate(l/min) Indoor Unit Model : AHNW16***A1 (HN16** NK1) Hydraulic Head Loss(mH2O) H Max. : high speed setting Med. : low speed setting Max. Med Water Flowrate(l/min) Warning : Selecting a water flowrate outside the curves can cause damage to or malfunction of the unit. : Operation cutoff range Air-to-Water Heat Pump _ 15

31 Part 3. Outdoor Unit 1. Nomenclature 2. List of Functions 3. Specifications 4. Dimensions 5. Wiring Diagrams 6. Piping Diagrams 7. Performance Data 8. Capacity Correction Factor 9. Operation Range 10. Noise Criteria

32 1. Nomenclature 1.1 Global Model Name AH U W 16 8 A 1 Serial Number Chassis Name Electrical Ratings 6 : 1 phase V 50Hz 8 : 3 phase V 50Hz Nominal Heating Capacity Indication Conversion to kw Ex) "09" : 9 kw Class "12" : 12 kw Class "14" : 14 kw Class "16" : 16 kw Class Combination of Inverter Type and Cooling Only or Heat Pump W : DC Inverter Heat Pump Classification U : Outdoor Unit Air-to-Water Heat Pump for R410A 1.2 Europe Model Name H U 09 1 M Leaving Water Combination None : Low Temperature Leaving Water H : High Temperature Leaving Water M : Middle Temperature Leaving Water 1 : 1 Phase V 50Hz 3 : 3 Phase V 50Hz Nominal Heating Capacity Indication Conversion to kw Class Ex) "09" : 9 kw Class "12" : 12 kw Class "14" : 14 kw Class "16" : 16 kw Class U : Outdoor Unit Outdoor Unit H : Air to Water Heat Pump Air-to-Water Heat Pump _ 1

33 2. List of Functions Category Reliability Convenience CAC network function Function Defrost / Deicing High pressure switch Low pressure switch Phase protection Restart delay (3-minutes) Self diagnosis Soft start Test function Auto operation(artificial intelligence) Auto restart operation Network soluation(lgap) PDI(Power Distribution Indicator) PI485 Special function kit Low ambient operation Others Thermistor AWHP Sanitary Tank Heating Silent Operation Emergency Operation AHUW096A1 (HU091 U41) AHUW126A1 (HU121 U31) AHUW146A1 (HU1461 U31) AHUW166A1 (HU161 U31) O O O O O O PMNFP14A0 PMNFP14A0 PMNFP14A0 PMNFP14A O O O Outdoor Unit Category Reliability Convenience CAC network function Special function kit Others AWHP Function Defrost / Deicing High pressure switch Low pressure switch Phase protection Restart delay (3-minutes) Self diagnosis Soft start Test function Auto operation(artificial intelligence) Auto restart operation Network soluation(lgap) PDI(Power Distribution Indicator) PI485 Low ambient operation Thermistor Sanitary Tank Heating Silent Operation Emergency Operation AHUW128A1 (HU123 U31) AHUW148A1 (HU143 U31) AHUW168A1 (HU163 U31) PMNFP14A0 PMNFP14A0 PMNFP14A Notes O : Applied, X : Not applied, : No relation * Accessory: Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package. 2 _ Air-to-Water Heat Pump

34 3. Specifications Outdoor Units Power Supply Ø / V / Hz Maximum Running Cooling A Current Heating A Wiring Connections For Power Supply (Included Earth) Number of wires For Connection with Indoor Unit (Included Earth) Number of wires * Capacity Cooling(A35/W18) kw Heating(A7W35) kw * Power Input Cooling(A35/W18) kw Heating(A7W35) kw * EER Cooling(A35/W18) W/W COP Heating(A7W35) W/W Operation Range(Min.~Max.) Cooling C DB Outdoor Temperature Heating C DB Compressor Type - Model - Quantity EA Displacement cm 3 /Rev. Capacity kw Compressor Motor Type - Quantity EA Rated Output W Refrigerant Type - Charge g(oz) Control - Refrigerant Oil Type - Charged Volume cc Heat Exchanger Quantity EA Rows EA Columns EA FPI Fins/inch Fan Type - Quantity EA Air Flow Rate CMM(l/s) Fan Motor Model - Quantity EA Output W Sound Pressure Cooling db(a)±3 Level Heating db(a)±3 Liquid Piping Type - Connection Outer Diameter mm(inch) Gas Piping Type - Connection Outer Diameter mm(inch) Piping Length Minimum m (Outdoor Unit ~ Standard m Indoor Unit) Maximum m Height Difference (Outdoor Unit ~ Indoor Unit) Maximum m Additional Refrigerant Charge g/m Dimensions Unit(W x H x D) mm Packed Unit(W x H x D) mm Weight Unit kg Packed Unit kg AHUW096A1 (HU091 U41) AHUW126A1 (HU121 U31) 1 / / 50 1 / / , , ~48 5 ~ 48-20~30-20 ~ 30 Hermetic Motor Hermetic Motor GJT240DAA Note : 1. Capacities and power inputs are based on the following conditions: * : Cooling conditions - Indoor Water Temperature 23 C/18 C; Outdoor Air Temperature 35 CDB/24 CWB Heating conditions - Indoor Water Temperature 30 C/35 C; Outdoor Air Temperature 7 CDB/6 CWB Standard piping length 7.5m 2. Wiring cable size must comply with the applicable local and national code. 3. The specification may be subject to change without prior notice for purpose of improvement. GPT425DBA Brushless Brushless 1 1 1,700 4,000 R410A R410A 1,900(67.0) 2,850(100.5) Electronic Expansion Valve Electronic Expension Valve FVC68D FVC68D 900 1, Propeller Propeller (1,000) 60(1,000) SIC-72FW-F SIC-72FW-F Flare Flare 9.52(3/8) 9.52(3/8) Flare Flare 15.88(5/8) 15.88(5/8) x 834 x Χ 1,380 Χ 330 1,140 x 900 x 461 1,140 Χ 1,462 Χ Outdoor Unit Air-to-Water Heat Pump _ 3

35 3. Specifications Outdoor Unit Outdoor Units Power Supply Ø / V / Hz Maximum Running Cooling A Current Heating A Wiring Connections For Power Supply (Included Earth) Number of wires For Connection with Indoor Unit (Included Earth) Number of wires * Capacity Cooling(A35/W18) kw Heating(A7W35) kw * Power Input Cooling(A35/W18) kw Heating(A7W35) kw * EER Cooling(A35/W18) W/W COP Heating(A7W35) W/W Operation Range(Min.~Max.) Cooling C DB Outdoor Temperature Heating C DB Compressor Type - Model - Quantity EA Displacement cm 3 /Rev. Capacity kw Compressor Motor Type - Quantity EA Rated Output W Refrigerant Type - Charge g(oz) Control - Refrigerant Oil Type - Charged Volume cc Heat Exchanger Quantity EA Rows EA Columns EA FPI Fins/inch Fan Type - Quantity EA Air Flow Rate CMM(l/s) Fan Motor Model - Quantity EA Output W Sound Pressure Cooling db(a)±3 Level Heating db(a)±3 Liquid Piping Type - Connection Outer Diameter mm(inch) Gas Piping Type - Connection Outer Diameter mm(inch) Piping Length Minimum m (Outdoor Unit ~ Standard m Indoor Unit) Maximum m Height Difference (Outdoor Unit ~ Indoor Unit) Maximum m Additional Refrigerant Charge g/m Dimensions Unit(W x H x D) mm Packed Unit(W x H x D) mm Weight Unit kg Packed Unit kg AHUW146A1 (HU141 U31) AHUW166A1 (HU161 U31) AHUW128A1 (HU123 U31) 1 / / 50 1 / / 50 3/ / ,690 5, ,150 3, ~ 48 5 ~ 48 5~48-20 ~ ~ 30-20~30 Hermetic Motor Hermetic Motor Hermetic Motor GPT425DBA GPT425DBA GPT425DAA (at 60Hz) Brushless Brushless Brushless ,000 4,000 4,000 R410A R410A R410A 2,850(100.5) 2,850(100.5) 2,980(105.1) Electronic Expension Valve Electronic Expension Valve Electronic Expansion Valve FVC68D FVC68D FV50S 1,300 1,300 1, Propeller Propeller Propeller (1,000) 60(1,000) 60(1,000) SIC-72FW-F SIC-72FW-F SIC-72FW-F Flare Flare Flare 9.52(3/8) 9.52(3/8) 9.52(3/8) Flare Flare Flare 15.88(5/8) 15.88(5/8) 15.88(5/8) Χ 1,380 Χ Χ 1,380 Χ x 1,380 x 330 1,140 Χ 1,462 Χ 461 1,140 Χ 1,462 Χ 461 1,140 x 1,462 x Note : 1. Capacities and power inputs are based on the following conditions: * : Cooling conditions - Indoor Water Temperature 23 C/18 C; Outdoor Air Temperature 35 CDB/24 CWB Heating conditions - Indoor Water Temperature 30 C/35 C; Outdoor Air Temperature 7 CDB/6 CWB Standard piping length 7.5m 2. Wiring cable size must comply with the applicable local and national code. 3. The specification may be subject to change without prior notice for purpose of improvement. 4 _ Air-to-Water Heat Pump

36 3. Specifications Outdoor Units Power Supply Ø / V / Hz Maximum Running Cooling A Current Heating A Wiring Connections For Power Supply (Included Earth) Number of wires For Connection with Indoor Unit (Included Earth) Number of wires * Capacity Cooling(A35/W18) kw Heating(A7W35) kw * Power Input Cooling(A35/W18) kw Heating(A7W35) kw * EER Cooling(A35/W18) W/W COP Heating(A7W35) W/W Operation Range(Min.~Max.) Cooling C DB Outdoor Temperature Heating C DB Compressor Type - Model - Quantity EA Displacement cm 3 /Rev. Capacity kw Compressor Motor Type - Quantity EA Rated Output W Refrigerant Type - Charge g(oz) Control - Refrigerant Oil Type - Charged Volume cc Heat Exchanger Quantity EA Rows EA Columns EA FPI Fins/inch Fan Type - Quantity EA Air Flow Rate CMM(l/s) Fan Motor Model - Quantity EA Output W Sound Pressure Cooling db(a)±3 Level Heating db(a)±3 Liquid Piping Type - Connection Outer Diameter mm(inch) Gas Piping Type - Connection Outer Diameter mm(inch) Piping Length Minimum m (Outdoor Unit ~ Standard m Indoor Unit) Maximum m Height Difference (Outdoor Unit ~ Indoor Unit) Maximum m Additional Refrigerant Charge g/m Dimensions Unit(W x H x D) mm Packed Unit(W x H x D) mm Weight Unit kg Packed Unit kg AHUW148A1 (HU143 U31) AHUW168A1 (HU163 U31) 3/ /50 3/ / ~48 5~48-20~30-20~30 Hermetic Motor Hermetic Motor GPT425DAA GPT425DAA (at 60Hz) (at 60Hz) Brushless Brushless 1 1 4,000 4,000 R410A R410A 2,980(105.1) 2,980(105.1) Electronic Expansion Valve Electronic Expansion Valve FV50S FV50S 1,300 1, Propeller Propeller (1,000) 60(1,000) SIC-72FW-F SIC-72FW-F Flare Flare 9.52(3/8) 9.52(3/8) Flare Flare 15.88(5/8) 15.88(5/8) x 1,380 x x 1,380 x 330 1,140 x 1,462 x 461 1,140 x 1,462 x Outdoor Unit Note : 1. Capacities and power inputs are based on the following conditions: * : Cooling conditions - Indoor Water Temperature 23 C/18 C; Outdoor Air Temperature 35 CDB/24 CWB Heating conditions - Indoor Water Temperature 30 C/35 C; Outdoor Air Temperature 7 CDB/6 CWB Standard piping length 7.5m 2. Wiring cable size must comply with the applicable local and national code. 3. The specification may be subject to change without prior notice for purpose of improvement. Air-to-Water Heat Pump _ 5

37 4. Dimensions Outdoor Unit 3 4 [Unit:mm] AHUW096A1 (HU091 U41) Liquid side service valve(mm) Gas side service valve(mm) Air discharge grill Control Cover Note 1. Unit should be installed in compliance with the installation manual in the product box. 2. Unit should be grounded in accordance with the local regulations or applicable national codes. 3. All electrical components and materials to be supplied on the site must comply with the local regulations or international codes. 4. Electrical characteristics chapter should be considered for electrical work and design. Especially the capacity of power cable and circuit breaker for outdoor unit should be more than that of electrical characteristics chapter. 6 _ Air-to-Water Heat Pump

38 4. Dimensions Supporter [Unit:mm] AHUW126A1 (HU121 U31) AHUW146A1 (HU141 U31) AHUW166A1 (HU161 U31) AHUW128A1 (HU123 U31) AHUW148A1 (HU143 U31) AHUW168A1 (HU163 U31) Liquid side service valve(mm) Gas side service valve(mm) Air discharge grill Control Cover Note 1. Unit should be installed in compliance with the installation manual in the product box. 2. Unit should be grounded in accordance with the local regulations or applicable national codes. 3. All electrical components and materials to be supplied on the site must comply with the local regulations or international codes. 4. Electrical characteristics chapter should be considered for electrical work and design. Especially the capacity of power cable and circuit breaker for outdoor unit should be more than that of electrical characteristics chapter. 490 Outdoor Unit Air-to-Water Heat Pump _ 7

39 5. Wiring Diagrams AHUW096A1(HU091 U41) Outdoor Unit 8 _ Air-to-Water Heat Pump

40 5. Wiring Diagrams AHUW126A1 (HU121 U31) AHUW146A1 (HU141 U31) AHUW166A1 (HU161 U31) Outdoor Unit Air-to-Water Heat Pump _ 9

41 5. Wiring Diagrams AHUW128A1 (HU123 U31) AHUW148A1 (HU143 U31) AHUW168A1 (HU163 U31) Outdoor Unit 10 _ Air-to-Water Heat Pump

42 6. Piping Diagrams AHUW096A1 (HU091 U41) AHUW126A1 (HU121 U31) AHUW146A1 (HU141 U31) AHUW166A1 (HU161 U31) AHUW128A1 (HU123 U31) AHUW148A1 (HU143 U31) AHUW168A1 (HU163 U31) INDOOR UNIT OUTDOOR UNIT LIQUID SIDE EEV Th2 3-Way Service Valve Th6 Th7 Indoor Unit Plate Heat Exchanger Th3 Low Pressure Switch Outdoor Unit Heat Exchanger Th8 Description GAS SIDE 3-Way Service Valve Category Symbol Meaning Indoor Unit Outdoor Unit Th1 Th2 Th3 Th4 Th5 Th6 Th7 Th8 *1 EEV Remote air temperature sensor Th4 Accumulator Inlet evaporator temperature sensor Outlet evaporator temperature sensor Compressor-suction pipe temperature sensor Compressor-discharge pipe temperature sensor Condenser temperature sensor Outdoor air temperature sensor Condenser middle temperature sensor Electronic Expansion Valve COMPRESSOR PCB Connector CN_ROOM CN_PIPE CN_PIPE/O CN_TH3 CN_TH3 CN_TH2 CN_TH2 CN_TH3 CN_LEV1 Th5 High Pressure Switch Reversing Valve Remarks COOLING HEATING - Optional accessory (being sold separately) - Not shown in diagram - Meaning is expressed based on Cooling mode. - Th4 and Th5 are connected at 4 pin type connector CN_TH3. - Description is expressed based on Cooling mode. - Th6 and Th7 are connected at 4 pin type connector CN_TH2 - Th8 is connected at 4 pin type connector CN_TH3 - Adjusting mass flow rate of circulating refrigerant Outdoor Unit *1:Applied Model : AHUW128A1, AHUW148A1, AHUW168A1, AHUW096A1, AHUW126A1, AHUW146A1, AHUW166A1 Air-to-Water Heat Pump _ 11

43 7. Performance Data 7.1 Cooling Operation Model AHUW096A1 (HU091 U41) Outdoor Temperature 20 C 30 C 35 C 40 C 45 C LWT 7 C LWT 10 C LWT 13 C LWT 15 C LWT 18 C LWT 20 C LWT 22 C TC PI TC PI TC PI TC PI TC PI TC PI TC PI Model AHUW126A1 (HU121 U31) Outdoor Temperature 20 C 30 C 35 C 40 C 45 C LWT 7 C LWT 10 C LWT 13 C LWT 15 C LWT 18 C LWT 20 C LWT 22 C TC PI TC PI TC PI TC PI TC PI TC PI TC PI Model AHUW146A1 (HU141 U31) Outdoor Temperature 20 C 30 C 35 C 40 C 45 C LWT 7 C LWT 10 C LWT 13 C LWT 15 C LWT 18 C LWT 20 C LWT 22 C TC PI TC PI TC PI TC PI TC PI TC PI TC PI Outdoor Unit Model AHUW166A1 (HU161 U31) Outdoor Temperature 20 C 30 C 35 C 40 C 45 C LWT 7 C LWT 10 C LWT 13 C LWT 15 C LWT 18 C LWT 20 C LWT 22 C TC PI TC PI TC PI TC PI TC PI TC PI TC PI LWT : Leaving Water Temperature TC : Total Capacity (Averaged value) PI : Power Input Notice : Measuring procedure follows EN Notice : Above table values may not be matched according to installation condition 12 _ Air-to-Water Heat Pump

44 7. Performance Data Model AHUW128A1 (HU123 U31) Outdoor Temperature 20 C 30 C 35 C 40 C 45 C LWT 7 C LWT 10 C LWT 13 C LWT 15 C LWT 18 C LWT 20 C LWT 22 C TC PI TC PI TC PI TC PI TC PI TC PI TC PI Model AHUW148A1 (HU143 U31) Outdoor Temperature 20 C 30 C 35 C 40 C 45 C LWT 7 C LWT 10 C LWT 13 C LWT 15 C LWT 18 C LWT 20 C LWT 22 C TC PI TC PI TC PI TC PI TC PI TC PI TC PI Model AHUW168A1 (HU163 U31) Outdoor Temperature 20 C 30 C 35 C 40 C 45 C LWT 7 C LWT 10 C LWT 13 C LWT 15 C LWT 18 C LWT 20 C LWT 22 C TC PI TC PI TC PI TC PI TC PI TC PI TC PI LWT : Leaving Water Temperature TC : Total Capacity (Averaged value) PI : Power Input Notice : Measuring procedure follows EN Notice : Above table values may not be matched according to installation condition Outdoor Unit Air-to-Water Heat Pump _ 13

45 7. Performance Data 7.2 Heating Operation Model AHUW096A1 (HU091 U41) Outdoor Temperature -15 C -7 C -2 C 2 C 7 C 10 C LWT 35 C LWT 45 C LWT 50 C LWT 55 C TC PI TC PI TC PI TC PI Model AHUW126A1 (HU121 U31) Outdoor Temperature -15 C -7 C -2 C 2 C 7 C 10 C LWT 35 C LWT 45 C LWT 50 C LWT 55 C TC PI TC PI TC PI TC PI Outdoor Unit Model AHUW146A1 (HU141 U31) Model AHUW166A1 (HU161 U31) Outdoor Temperature -15 C -7 C -2 C 2 C 7 C 10 C Outdoor Temperature -15 C -7 C -2 C 2 C 7 C 10 C LWT 35 C LWT 45 C LWT 50 C LWT 55 C TC PI TC PI TC PI TC PI LWT 35 C LWT 45 C LWT 50 C LWT 55 C TC PI TC PI TC PI TC PI LWT : Leaving Water Temperature TC : Total Capacity (Averaged value including defrost effect) PI : Power Input Notice : Measuring procedure follows EN Notice : Above table values may not be matched according to installation condition 14 _ Air-to-Water Heat Pump

46 7. Performance Data Model AHUW128A1 (HU123 U31) Outdoor Temperature -15 C -7 C -2 C 2 C 7 C 10 C LWT 35 C LWT 45 C LWT 50 C LWT 55 C TC PI TC PI TC PI TC PI Model AHUW148A1 (HU143 U31) Outdoor Temperature -15 C -7 C -2 C 2 C 7 C 10 C LWT 35 C LWT 45 C LWT 50 C LWT 55 C TC PI TC PI TC PI TC PI Model AHUW168A1 (HU163 U31) Outdoor Temperature -15 C -7 C -2 C 2 C 7 C 10 C LWT 35 C LWT 45 C LWT 50 C LWT 55 C TC PI TC PI TC PI TC PI LWT : Leaving Water Temperature TC : Total Capacity (Averaged value including defrost effect) PI : Power Input Notice : Measuring procedure follows EN Notice : Above table values may not be matched according to installation condition Outdoor Unit Air-to-Water Heat Pump _ 15

47 8. Capacity Correction Factor 8.1 Rate of change in the capacity by the piping length : AHUW096A1 (HU091 U41) Cooling Operation Heating Operation HU (m) HU (m) HL (m) HL (m) Outdoor Unit Symbols HU : Level difference between indoor and outdoor units where indoor unit in inferior position (m) HL : Level difference between indoor and outdoor units where indoor unit in superior position (m) L : Equivalent pipe length (m) α : Capacity correction factor 16 _ Air-to-Water Heat Pump

48 8. Capacity Correction Factor 8.2 Rate of change in the capacity by the piping length : AHUW126A1 (HU121 U31) AHUW146A1 (HU141 U31) AHUW166A1 (HU161 U31) AHUW128A1 (HU123 U31) AHUW148A1 (HU143 U31) AHUW168A1 (HU163 U31) Cooling Operation HU (m) HU (m) Heating Operation HL (m) HL (m) Symbols HU : Level difference between indoor and outdoor units where indoor unit in inferior position (m) HL : Level difference between indoor and outdoor units where indoor unit in superior position (m) L : Equivalent pipe length (m) α : Capacity correction factor Outdoor Unit Air-to-Water Heat Pump _ 17

49 9. Operation Range 9.1 Cooling Operation AHUW096A1 (HU091 U41) AHUW126A1 (HU121 U31) AHUW146A1 (HU141 U31) AHUW166A1 (HU161 U31) AHUW128A1 (HU123 U31) AHUW148A1 (HU143 U31) AHUW168A1 (HU163 U31) (Fan coil unit) (Under floor) Outdoor Temperature( ) Outdoor Temperature( ) Leaving Water Temperature( ) Leaving Water Temperature( ) Continuous Operation Outdoor Unit Operative 18 _ Air-to-Water Heat Pump

50 9. Operation Range 9.2 Heating Operation AHUW096A1 (HU091 U41) AHUW126A1 (HU121 U31) AHUW146A1 (HU141 U31) AHUW166A1 (HU161 U31) AHUW128A1 (HU123 U31) AHUW148A1 (HU143 U31) AHUW168A1 (HU163 U31) (Fan coil unit or Radiator) (Under floor) Outdoor Temperature( ) Outdoor Temperature( ) Leaving Water Temperature( ) Leaving Water Temperature( ) Continuous Operation Operative Outdoor Unit Air-to-Water Heat Pump _ 19

51 10. Noise Criteria Overall 1m Microphone 1.5m Notes: - Sound measured at 1m away with 1.5m height. - Data is valid at free field condition. - Data is valid at nominal operation condition. - Reference acoustic pressure acoustic 0dB-20Pa. - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed. - The operating conditions are assumed to be standard. (db(a)±3) 1Φ, V, 50Hz Model Cooling Heating AHUW096A1 (HU091 U41) AHUW126A1(HU121 U31) AHUW146A1(HU141 U31) AHUW166A1(HU161 U31) (db(a)±3) 3Φ, V, 50Hz Model Cooling Heating AHUW128A1 (HU123 U31) AHUW148A1 (HU143 U31) AHUW168A1 (HU163 U31) Sound pressure level n Cooling(1Ø) 80 AHUW096A1 (HU091 U41) 80 AHUW126A1(HU121 U31) 80 AHUW146A1(HU141 U31) Outdoor Unit Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC-25 Approximate NC-20 Hearing Threshold NC Octave Band Center Frequency (Hz) Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 NC-25 Approximate NC-20 Hearing Threshold NC Octave Band Center Frequency (Hz) Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC-25 Approximate NC-20 Hearing Threshold NC Octave Band Center Frequency (Hz) 80 AHUW166A1(HU161 U31) 70 Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC-25 Approximate NC-20 Hearing Threshold NC Octave Band Center Frequency (Hz) 20 _ Air-to-Water Heat Pump

52 10. Noise Criteria n Heating(1Ø) 80 AHUW096A1 (HU091 U41) 80 AHUW126A1(HU121 U31) 80 AHUW146A1(HU141 U31) Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC Approximate Hearing Threshold Octave Band Center Frequency (Hz) NC-25 NC-20 NC-15 AHUW166A1(HU161 U31) Approximate Hearing Threshold Octave Band Center Frequency (Hz) NC-25 NC-20 NC Approximate Hearing Threshold Octave Band Center Frequency (Hz) NC-25 NC-20 NC-15 Octave Band Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC Approximate Hearing Threshold n Cooling(3Ø) AHUW128A1 (HU123 U31) NC-25 NC-20 NC AHUW148A1 (HU143 U31) 80 AHUW168A1 (HU163 U31) Outdoor Unit Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC-25 Approximate NC-20 Hearing Threshold NC Octave Band Center Frequency (Hz) 20 NC-25 Approximate NC-20 Hearing Threshold NC Octave Band Center Frequency (Hz) 20 NC-25 Approximate NC-20 Hearing Threshold NC Octave Band Center Frequency (Hz) Air-to-Water Heat Pump _ 21

53 10. Noise Criteria n Heating(3Ø) 80 AHUW128A1 (HU123 U31) 80 AHUW148A1 (HU143 U31) 80 AHUW168A1 (HU163 U31) Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Octave Band Sound Pressure Level (db re 20Pa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC NC NC-25 Approximate NC-20 Hearing Threshold NC Approximate NC-20 Hearing Threshold NC Approximate NC-20 Hearing Threshold NC Octave Band Center Frequency (Hz) Octave Band Center Frequency (Hz) Octave Band Center Frequency (Hz) Approximated SPL at specific distance : SPL[dB] = A + 20xLog(B/C) where A[dB] : SPL at 1m distance B[m] : 1m C[m] : specific distance Outdoor Unit 22 _ Air-to-Water Heat Pump

54 Part 4. Accessories 1. Dry Contact (PQDSA) 2. Remote Temperature Sensor (PQRSTA0) 3. PI485 (PMNFP14A0) 4. Sanitary Water Tank Kit(PHLTA) 5. Solar Thermal Kit(PHLLA / PHLLB)

55 1. Dry Contact (PQDSA) 1.1 Overview LG Dry Contact is a solution for automatic control of air conditioning system at the ownerʼs behest. In simple words, itʼs a switch which can be used to turn the unit On/Off after getting the signal from external sources like key-in lock, door or window switch etc specially used in Hotel rooms. Itʼs a small PCB that either can be fit inside the control box of Indoor unit or can be outside the unit in a plastic case if there is no sufficient space inside the Indoor unit. Apart from simple installation, it can also be linked to Central Controller via Indoor unit PI485 pcb. For this, all connecting wires & an additional small pcb for looping is also provided along with Dry Contact. Dry Contact can be used in two ways. 1. It can be used to actually turn On/Off the system on receiving the signal from the source. In this case, user doesn't need to use remote controller anymore to turn On/Off the system. However all the further settings like temperature, fan speed, mode etc can be done through remote controller only. 2. Other way is almost similar as above but in this case, after getting the On signal from the external source, user has to turn On the system from remote controller only. Dry contact just activates the system. However system can be turned Off directly from the external source. So only On mode is different here. So in both of above conditions, system canʼt be operated without signal from external source which prevents unnecessary use of system & facilitates its operation only when its required. These settings can be selected from the remote controller whose details have been explained in the later part of this manual So depending upon the requirement, Dry Contact offers a variety of applications to suit the customerʼs requirement in the best possible way. Power Connector Indoor PCB Connector Accessories Dry Contact Controller Connector Air-to-Water Heat Pump _ 1

56 1. Dry Contact (PQDSA) 1.2 Part Description 1 CN-POWER : AC 220V Connector CN-CC : Indoor PCB Connector CN_DRY (L) : DRY CONTROLLER Connector CN_DRY ( SIG ) : DRY CONTROLLER Connector CN_DRY (ERROR CHECK) : ERROR Check Display Connector CN_DRY( OPER STATE): Operation Display Connector Accessory Cable 1EA (for Central controller) Connecting PCB (6871A30056A) *for Central Controller Dry contact (For installation, 4EA) Cable 3EA (for connecting with indoor unit) Dry contact - 4EA (For assembly the case) Accessories NOTE [Structure of each cable] User/Installation Manual These cable using for connection between Dry contact and Indoor unit. So before using these things Please check the connector type first and use cables on proper indoor unit. 2 _ Air-to-Water Heat Pump

57 1. Dry Contact (PQDSA) 1.3 Installation Guide Step 1 Connect CN-CC with Indoor PCB by the cable(provided) - Connection of Dry contact only Indoor PCB CN-CC CN-CC DRY CONTACT PCB AC 220V - Connection of Dry contact & LG Central Controller in case of single constant models. Connection PCB (6871A30056A) Indoor PCB CN-CC CN-CC DRY CONTACT PCB AC 220V S1 BR1 ON L SWITCH U03Y OSC01B L02D L01D U04Y U02Y C01A LED1 LED01G LED02G LED03G IC01A PI485 PCB : Special purchase for Central Control (Ex : PHNFP14A0 or PSNFP14A0...) TANS01Y C03Y C04Y ZNR01Y CN_COMM * Single Only - When you install single product this PCB have to add. Accessories Air-to-Water Heat Pump _ 3

58 1. Dry Contact (PQDSA) Step 2 Connect CN_DRY with Control Unit. (Fix SUB PCB into the proper location.) - To apply power source through PCB DRY CONTACT PCB CN-CC RY1 RY CN_DRY N L Operation Display Error Check Display Dry contact Controller INPUT AC 220V LG does not supply this section - To apply power source directly to external source DRY CONTACT PCB CN-CC RY1 RY CN_DRY N L Operation Display Error Check Display Dry contact Controller INPUT AC 220V LG does not supply this section Accessories 4 _ Air-to-Water Heat Pump

59 2. Remote Temperature Sensor (PQRSTA0) 2.1 Part Description Remote temperature sensor can be installed any place a user wants to detect the temperature Remote Sensor 70mm Remote Sensor 120mm Connection Wire Parts Connection wire 15m(1EA) Fixing screw for Remote Sensor(2EA) Installation Manual Accessories Air-to-Water Heat Pump _ 5

60 2. Remote Temperature Sensor (PQRSTA0) 2.2 Installation Method How to use 1. After deciding where the remote temperature sensor is installed, decide the location and height of the fixing screws. (Interval between the screws : 60mm) Fixing screws 60mm 2. Insert the connector of the connection wire into the space for the connector in place of the room temperature sensor. (CN_ROOM) 3. Separately, set the option code of the attached controller on the indoor unit. In detail, refer to "installer setting mode" in the owner's manual How to connect the remote temperature sensor and the connection wire The Connection wire does not matter if you change the color of the wire because of non-polar How to install the remote temperature sensor on the wall Integrate the remote temperature sensor with the screws as the order of arrows. Fixing the Remote Sensor Accessories CAUTION 1. Choose the place where the average temperature can be measured for the place the indoor unit operates. 2. Avoid direct sunlight. 3. Choose the place where the cooling/heating devices do not affect the remote sensor. 4. Choose the place where the outlet of the cooling fan do not affect the remote sensor. 5. Choose the place where the remote sensor isnʼt affected when door is open. 6 _ Air-to-Water Heat Pump

61 3. PI485 (PMNFP14A0) 3.1 Part Description 1 KSDO4H ON L h The location of parts might be different in case of PMNFP14A1. PMNFP14A0 : For connecting 1 ~ 16 Indoor Units PI485 GATEWAY(M) 1 CN_PWR: AC 220V Connector 2 +10V: DC 10V Terminal 3 GND: Ground 4 BUS_A: *RS-485 (+) Terminal (Refer to note) 5 BUS_B: RS-485 (-) Terminal 6 CN_OUT: Outdoor Unit Connector 7 LED1:RS-485 Status LED 8 DIP Switch: Product Selection (Refer to the DIP Switch Configuration ) 9 LED01G, 02G, 03G: Communication Status LED 10 Reset Switch: PI485(M) Reset 11 CN_DRY: DRY Contact NOTE RS-485 is one of the international interface standards for serial communication. Accessories Air-to-Water Heat Pump _ 7

62 3. PI485 (PMNFP14A0) Accessories ON 3.2 Accessory Parts Multi-V KSDO4H L PI485 : PMNFP14A0(1EA) or PMNFP14A1(1EA) or PGNFP14A0(1EA) BRACKET (1EA) SCREW (4EA) Multi-V MPS Multi WIRE ASSY 1(1EA) WIRE ASSY 2(1EA) WIRE ASSY 3(1EA) Others : Tie Wrap (3 EA) - Cable Tie Clamp (1 EA) 8 _ Air-to-Water Heat Pump

63 3. PI485 (PMNFP14A0) 3.3 Installation Guide Installation Steps 1. 6 Connect CN_OUT with Outdoor Unit by the cable (provided) Connect RS-485 BUS_A(+) and BUS_(B)(-) with other network products (ex. Central Controller, I- Gateway...) In case of using Simple Central Controller, connect VCC(+10V) and GND. No need to connect otherwise Select DIP Switch Configuration(Refer page 8) 5. 1 Connect CN_PWR with Outdoor PCB Power connector (Refer page 9, 10) 6. After Power is ON, check the Communication LED 9 - LED1G(Red) Normal : LED blinks for 5 times and then gets OFF This process is repeated after every 3 minutes Error : Check the Indoor Unit's address & wiring connections - LED2G(Yellow), LED3G(Orange) Normal : LED blinks continuously Error : Check the DIP Switch setting & wiring connections 7. 7 Check RS-485 Communication Status LED: Normal : LED's blinks 2 times in every 10~30 seconds Error : Check the wiring connections 8. Finally if all of the above steps are OK, then tie the cables by tie wraps & clamp CAUTION Install the PI485 after checking the hole for screw. Accessories Air-to-Water Heat Pump _ 9

64 4. Sanitary Water Tank Kit(PHLTA) - Must be used for communication of sanitary water tank and indoor unit. 4.1 Part Description Sensor (Thermister) : This sensor (RHRSTA0) can be supplied separately. Sensor Adaptor - It can be attached on the sanitary water tank - Thermister is inserted in the sensor adaptor - connection 1/2"(12.7mm) BSP ELB (Earth Leakage Breaker) 40A Relay contactor Installation Manual Solar Thermal Kit(PHLLA / PHLLB) - Must be used for communication of solar thermal component and indoor unit. 5.1 Model - PHLLA : Sensorʼs limit temperature PHLLB : Sensorʼs limit temperature 120 Accessories 5.2 Part Description 1 Sensor (Thermister) 2 Sensor Adaptor - It can be attached on T type pipe fitting attatched in the pipe of solar thermal component - Thermister is inserted in the sensor adaptor - connection 1/2"(12.7mm) BSP 3 T type pipe fitting (option) _ Air-to-Water Heat Pump

65 P/No.: 3828A20892W Air Conditioner 20 Yeouido-dong, Yeongdeungpo-gu, Yeouido P.O.Box 335 Seoul, , Korea. All rights reserved Printed in Korea June/2010 The specifications, designs, and information in this brochure are subject to change without notice. The air conditioners manufactured by LG have received ISO9001 certificate for quality assurance and ISO14001 certificate for environmental management system.