Annex of the Certificate (Page 1/4) Scope of Accreditation
|
|
|
- Kimberly Glenn
- 9 years ago
- Views:
Transcription
1 Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Accreditation Nr: Address :Cevizli Mh. Tınaztepe Sk. Altınöz Apt. No:16 D Maltepe ISTANBUL / TURKEY Phone : Fax : [email protected] Website : Processed Parts Made of Metal -Metal pipes -Sheet metal-plates Welding processes Storage Tanks Pipelines Steel Construction Approval and evaluation of the material Approval and evaluation of the welding procedures Design controls, Process Controls Pre-manufacture project control, Process Controls Pipeline Hidrostatic Tests Pre-manufacture project control, process controls API Spec 5L, TS EN ISO 3183, TS EN Series, TS EN Series, API Spec 5CT TS EN Series, TS EN Series, TS EN series, ASME SEC. II A,B Procedures TPR-16, TPR-19 TS EN Series, TS EN ISO 15612, TS EN ISO 15607, TS EN ISO 15614, TS EN ISO 15613, ASME SECTION IX, AWS D.1.1, AWS D 1.5, API 1104, TS EN ISO 5817, TS EN ISO 6520 Series Procedures;TPR-03 API 650, API 620, API 653, API 575 API Std 1104, ASME B 31.1, ASME B 31.3, ASME B 31.8 Procedures;TPR-02, TPR-15 AWS D.1.1, AWS D.1.5, API Spec 4F, API RP 4G, EN 1993 Series, EN 1090 Series Procedures; TPR-01, TPR-21 Non-Destructive inspection Approval and evaluation of radiographic films 31.3, ASME B 31.8, ASME SEC. VIII, API 1104, EN 1435, EN ISO 5817, EN 12517, API 650, AWS D.1.1, AWS D.1.5
2 Annex of the Certificate (Page 2/4) Accreditation Nr: ( Non-Destructive inspection Devam) Liquid Penetrant Testing Magnetic Particle Testing Ultrasonic Testing 31.3, ASME B 31.8, ASME SEC VIII, API 1104, EN ISO 5817, EN 571-1, EN ISO 23277, API 650, AWS D.1.1, AWS D , ASME B 31.8, ASME SEC VIII, API 1104, EN ISO 5817, EN ISO 17638, EN ISO 23278, API 650, AWS D.1.1, AWS D , ASME B 31.8, ASME SEC VIII, API 1104, EN ISO 5817, EN ISO 11666, EN ISO 23279, EN ISO 17640, API 650, AWS D 1.1, AWS D.1.5 Visual Inspection ASME V, ASME B 31.1, ASME B 31.3, ASME B 31.8, ASME SEC VIII, API 1104, API 650, EN ISO 5817, EN ISO 17637, API 650, AWS D.1.1, AWS D.1.5 Fire Protection System Inspection of Housings as well as buildings serving to Accommodation, Corporate and Commercial Purposes and of Fire Protection Systems. Pressured Vessels; -Steam Boilers -Heating Boiler -Hot Oil Boiler -Hot Water Boiler -Air Tank -Hydrophore Control of Technical Files and Projects Control of Fire Protection System according to the Fire Project (Production Process Control) Design controls Process Controls The Ministry of Public Works and Settlement Regulations of Fire Protection System Structural NFPA Standards: NFPA 11, 12, 13, 14, 15, 16, 20, 22, 24, 25, 30/A, 58, 59, 72, 101 EN OSHA General Industry Standards-PART Technical Service Procedures; TPR-23 Regulation Concerning the Conditions on Health and Safety during the use of Professional Equipment TS 377 EN 12953, TS EN 13445, AD 2000, ASME Sec I, ASME Sec. VIII Div. 1 & Div.2, TS 1203 EN 286-1
3 Annex of the Certificate (Page 3/4) Accreditation Nr: Lifting and Transmitting Machinery - Overhead Travelling Cranes - Portal Cranes - Mobile Cranes - Workshop Hoists - Forklifts - Vehicle Lifts - Columnar Working Platform - Suspensory Access Equipment - Mobile elevating work platform - Transpallet Regulation Concerning the Conditions on Health and Safety during the use of Professional Equipment TS EN 1493 TS ISO 3184 TS TS ISO 1074 TS ISO 4309 TS ISO TS EN A1 TS EN 280 TS EN 1495+A2 TS EN 1808 TS ISO TS EN A1 TS EN Boiler Room Conformity Inspections Regulation Concerning the Conditions on Health and Safety during the use of Professional Equipment Regulation Concerning the Fire Protection of Buildings All kinds of consumer products, food and agricultural products, petroleum, and petrochemical commodities, metal and metal products, machinery, motor and spare parts, construction materials, textile, electric and electronical products, industrial products, pharmaceuticals, car-vehicles, new and second hand goods Inspection Services of products concerned by Foreign Trade ( Physical Inspection and/ or documental check) Verification of quantity and physical identification for Pre-shipment Inspection Witness of loading Working Procedures and Work Instructions: TPR61 PSI (Pre-Shipment Inspection) Code of Practice - Document IFIA 1001 World Custom Organization (WCO) and East African Community EAC Common External Tariff Code Harmonized Classification Systems
4 Annex of the Certificate (Page 4/4) Accreditation Nr: (All kinds of consumer products, food and agricultural products, petroleum, and petrochemical commodities, metal and metal products, machinery, motor and spare parts, construction materials, textile, electric and electronical products, industrial products, pharmaceuticals, car-vehicles, new and second hand goods Devam) Verification of Conformity of products concerned by Foreign Trade (via Physical Inspection and/ or documental check) according to Local/ Regional/ International Standards (VOC) Consignment Based Conformity Assessment (CBCA) End of Scope Working Procedures and Work Instructions: TPR 60 CBCA Code of Practice - Document IFIA Client/ Government Requirements and/ or Local/ Regional/ International Standards Dr. H. İbrahim ÇETİN Secretary General
5 Annex of the Certificate (Page 1/1) Accreditation Scope / Additional assessment document for this scope : EA 2/17 Accreditation Nr: As a "Type A" Inspection Body Address : Cevizli Mh. Tınaztepe Sk. Altınöz Apt. No:16 D Maltepe Phone Fax Website : : : [email protected] : 97/23/EC (2014/68/EU) Product Family, Product / Intended Use Pressure Equipments / Modules Internal manufacturing control Module A1 (2014/68/EU Module A2) EC Type Examination Module B (2014/68/EU Module B) EC Design Examination Module B1 (2014/68/EU Module B1) EC Conformity to Type Module C1 (2014/68/EU Module C2) EC Product Verification Module F (2014/68/EU Module F) EC Unit Verification Module G (2014/68/EU Module G) Evaluation and approval of fixed connection procedures End of Scope / Explanations 97/23/EC Pressure Equipment Directive Annex-III and 2014/68/EU Pressure Equipment Directive Annex-III 97/23/AT Pressure Equipment Directive ve 2014/68/EU Pressure Equipment Directive Annex-I Item Dr. H. İbrahim ÇETİN Secretary General Note: These scopes are valid only for Notified Body activities in the regulated area
6 Annex of the Certificate (Page 1/1) Accreditation Scope / Additional assessment document for this scope : EA 2/17 Accreditation Nr: As a "Type A" Inspection Body Address : Cevizli Mh. Tınaztepe Sk. Altınöz Apt. No:16 D Maltepe Phone Fax Website : : : [email protected] : /105/EC (2014/29/EU) Product Family, Product / Intended Use Simple Pressure Vessels / Modules EC Type Examination Article10 EC Verification Article 11 EC Declaration of Conformity Article 12, 13 and 14 EU-Type Examination Module B - production type and Module B - design type 2014/29/EU Module C 2014/29/EU Module C1 2014/29/EU Module C2 End of Scope / Explanations 2009/105/EC Simple Pressure Vessels Directive Article 13 and 2014/29/EU Simple Pressure Vessels Directive Article 13 Dr. H. İbrahim ÇETİN Secretary General Note: These scopes are valid only for Notified Body activities in the regulated area
Annex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Accreditation Nr: Address :Centrum İş Merkezi Aydınevler Sanayi Cad. No:3 Küçükyalı - Maltepe 34854 ISTANBUL / TURKEY Phone : +90 216 518
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 126 Hagley Road Contact: Mr T Webster Edgbaston Tel: +44 (0)121 456 1311 Birmingham Fax: +44 (0)121 456 1754 B16 9PF E-Mail: [email protected]
Schedule of Accreditation issued by United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Royal & SunAlliance Insurance PlcTrading as:- RSA Engineering and 17 York Street Manchester M2 3RS Contact: Mr Richard Green Tel: +44 (0)161 235 3069
INDUSTRIAL SERVICES PRESSURE EQUIPMENT CERTIFICATION (PED) Pressure equipment certification. Your key to market access in Europe. www.tuv.
INDUSTRIAL SERVICES PRESSURE EQUIPMENT CERTIFICATION (PED) Pressure equipment certification. Your key to market access in Europe. www.tuv.com Comply with legal regulations and requirements. We help you
BODY OF KNOWLEDGE API-653 ABOVEGROUND STORAGE TANK INSPECTOR CERTIFICATION EXAMINATION November 2015, March 2016 and July 2016 (Replaces October 2013)
BODY OF KNOWLEDGE API-653 ABOVEGROUND STORAGE TANK INSPECTOR CERTIFICATION EXAMINATION November 2015, March 2016 and July 2016 (Replaces October 2013) API Authorized Aboveground Storage Tank Inspectors
Pressure Equipment Certification. Ensure the Conformity and Quality of Your Pressure Equipment. Worldwide. www.tuv.com/asme
INDUSTRIAL SERVICES PRESSURE EQUIPMENT CERTIFICATION Pressure Equipment Certification. Ensure the Conformity and Quality of Your Pressure Equipment. Worldwide. www.tuv.com/asme Worldwide Compliance of
1 core mission. 140 countries. 8 businesses. >60,000 employees. 940 offices. 340 laboratories. Bureau Veritas - The Group
Bureau Veritas - The Group 8 businesses Founded in 1828, Bureau Veritas is a global leader in testing, inspection and certification, delivering high quality services to help clients meet the growing challenges
GLOBAL INSPECTION AND CERTIFICATION
GLOBAL INSPECTION AND CERTIFICATION CONTENTS About us 3 Services 3 Lifting Equipment Inspection & Certification 3 Conventional & Advanced Non Destructive Testing (NDT) 4 Rig Inspection & Commissioning
List of Frequently Utilized Storage Tank Standards and Practices
List of Frequently Utilized Storage Tank Standards and Practices Below is a list of frequently used storage tank standards and practices from organizations that are referenced in 25 PA Code, Chapter 245.
WORK SCOPE. Domains in which we work:
WORK SCOPE Engineering consulting, technical office, assistance and supervision in industrial works. We specialize in structures, civil works and industrial equipment. Domains in which we work: Industrial
RG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing
This publication contains policy, recommendations and guidance applicable to UKAS accredited inspection bodies RG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing Contents Section
Owner-User Pressure Equipment Integrity Management Requirements
the pressure equipment safety authority Owner-User Pressure Equipment Integrity Management Requirements AB-512 Edition 2, Revision 0 Issued 2015-06-25 Owner-user Pressure Equipment Integrity Management
BODY OF KNOWLEDGE API-570 AUTHORIZED PIPING INSPECTOR CERTIFICATION EXAMINATION
BODY OF KNOWLEDGE API-570 AUTHORIZED PIPING INSPECTOR CERTIFICATION EXAMINATION 2015 (Replaces July 2013) API Authorized Piping Inspectors must have a broad knowledge base relating to maintenance, inspection,
Welding Codes and How They're Used (DOD) (ANSI). (AWS), (ASME) (API). not American Welding Society AWS D1.1 AWS D1.2 AWS D1.3 AWS D1.4 AWS D1.
Welding Codes and How They're Used Almost all design, welding, fabrication, material, repair, testing, and inspection requirements are covered under three main governing organizations. Even the Department
CODES AND STANDARDS FOR DESIGN, SUPPLY AND CONSTRUCTION OF NATURAL GAS PIPELINE. Specification for Line Pipe. Specification for Pipeline Valves
CODES AND STANDARDS FOR DESIGN, SUPPLY AND CONSTRUCTION OF NATURAL GAS PIPELINE Description Standard Title Mainline Valve API 5L API 6D ASME B31.8 Specification for Line Pipe Specification for Pipeline
NON-DESTRUCTIVE TESTING FULL SCOPE OF INTEGRATED NDT SERVICES
NON-DESTRUCTIVE TESTING FULL SCOPE OF INTEGRATED NDT SERVICES RIGHT SERVICE MAXIMUM RETURN Whether it is in fabrication, pipe manufacturing, pipeline, plant construction, chemical, petrochemical plants,
SERVING THE NATIONS LEADING COMPANIES
SERVING THE NATIONS LEADING COMPANIES Amerada Hess BP Chemical BP Refining & Pipeline Citgo Petroleum Corporation Colonial Pipeline Conoco Phillips Pipeline Enbridge Energy Company, Inc. Equistar Chemical
Australian/New Zealand Standard
AS/NZS ISO 3834.5:2008 ISO 3834-5:2005 AS/NZS ISO 3834.5:2008 Australian/New Zealand Standard Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary
Pressure Vessel acc. to PED for Chemical Industry fabricated in China
Pressure Vessel acc. to PED for Chemical Industry fabricated in China Kurt Schumacher ACHEMASIA 2013 Beijing May 14, 2013 Folie 1 Introduction Investment projects in the chemical/petrochemical industry
Non-Destructive Testing
Non-Destructive Testing Bureau Veritas is one of the largest Testing, Inspection and Certification service providers in the world. First established in 1828, Bureau Veritas now spans the globe with a network
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
PBX Series Quick Fit Connector Bimetallic Steam Traps
6262100/6 IM-P626-01 ST Issue 6 PBX Series Quick Fit Connector Bimetallic Steam Traps Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 10 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
Founded in 1993, TUBOSER is considered one of the most active oilfield inspection companies in Tunisia, Libya and Mauritania.
OHSAS 18001 ISO 29001 About us We are a third party oilfield inspection company, a top provider of Oilfield Inspection Services in North Africa. Headquartered in Sfax Tunisia, the company's Inspection
Guide to understanding Welding Procedure Specification (WPS), Procedure Qualification Record (PQR), and Welder Performance Qualification Record (WPQR)
An AEIS White Paper 265 Birdsall Dr. Yorktown Heights, NY 10598 914 214 8460 www.aeis.us Guide to understanding Welding Procedure Specification (WPS), Procedure Qualification Record (PQR), and Welder Performance
BUSINESS PLAN CEN/TC 54 UNFIRED PRESSURE VESSELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 54 UNFIRED PRESSURE VESSELS EXECUTIVE SUMMARY Business Environment CEN/TC 54 deals with a wide range of vessels for the energy and process industries that fall within the scope
ASME B31.3 Process Piping. Scope of B31.3 Course
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. Introduction -1 Scope of B31.3 Course This course covers piping as typically used in process
Aviva Insurance Limited
One Park Place, Hatch Street, Dublin 2 Registration number: 9002 is accredited by the Irish National Board (INAB) to undertake inspection as detailed in the Schedule bearing the above registration number,
The Coating Machinery Experts Supplier Questionnaire
Date: Completed by: Company Data 1.1 General Data Full company name, legal form and address: Short form of company name: Country: USt. ID/ VAT Reg./ N.IVA/ NIPIC/ UID Nr./ ID TVA: Company homepage: www.
TÜV AUSTRIA Group Worldwide Services
TÜV AUSTRIA Group Worldwide Services Worldwide services Safety that reassures. Reliability that convinces. The aims of the TÜV AUSTRIA Group have been and always will be to assist in improving technical
ASSet InteGrIty MAnAGeMent PArtnerInG to AChIeve your InSPeCtIOn, engineering, data MAnAGeMent And SAfety GOAlS WWW.SGS.COM/AIM
asset integrity management Partnering to achieve your inspection, engineering, data management and safety goals WWW.SGS.COM/AIM ASSET INTEGRITY MANAGEMENT AIM An asset has integrity when it is operated
Indiana Boiler and Pressure Vessel Safety Section Frequently Asked Questions
Indiana Boiler and Pressure Vessel Safety Section Frequently Asked Questions What are the licensing requirements for boiler operators? Answer: Indiana statute (IC 22-15-6) and administrative rules (680
ASME Codes & Standards Online Learning for Engineering Students
ASME Codes & Standards Online Learning for Engineering Students Ken Balkey Senior Vice President, ASME Standards & Certification Consulting Engineer, Westinghouse Electric Company Adjunct Faculty Lecturer,
NEW AND GLOBAL + OLD APPROACH PRODUCT LEGISLATION: A. Standard questionnaire to be filled for each sector individually:
IV. NEW AND GLOBAL + OLD APPROACH PRODUCT LEGISLATION: A. Standard questionnaire to be filled for each sector individually: Sector: Noise emission in the environment by equipment for use outdoors Directive
Safety, Health and Accessibility Design Guidelines For Architects, Engineers and Design Firms
Safety, Health and Accessibility Design Guidelines For Architects, Engineers and Design Firms U.S. Department of the Interior Bureau of Indian Affairs Division of Safety and Risk Management Introduction
GUIDELINES FOR THE APPROVAL OF NATURAL GAS APPLIANCE INSTALLATIONS IN ISRAEL
GUIDELINES FOR THE APPROVAL OF NATURAL GAS APPLIANCE INSTALLATIONS IN ISRAEL 1 Scope These guidelines outline the regulatory and technical requirements and the roles and Responsibilities of the various
EXTENSION OF PERIODIC INSPECTION INTERVAL FOR LPG CYLINDERS
EXTENSION OF PERIODIC INSPECTION INTERVAL FOR LPG CYLINDERS VCA guidance for gaining authorisation in Great Britain Page 1 of 7 EXTENSION OF PERIODIC INSPECTION INTERVAL FOR LPG CYLINDERS VCA guidance
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION May and September, 2016 and January 2017 (Replaces May 2015) API Authorized Pressure Vessel Inspectors must have a broad knowledge
Annex of the certificate (Page 1/2) Accreditation Scope
Annex of the certificate (Page 1/2) ISO 9001:2008 Quality Management System Certification Plaza Yukarı Dudullu * EA Code Description 1 Agriculture, forestry and fishing 2 Mining and quarrying 3 Food products,beverages
NON-DESTRUCTIVE TESTING OF PIPELINES. L. Annila. Abstract
NON-DESTRUCTIVE TESTING OF PIPELINES L. Annila Abstract This paper shall present different, contemporarily available non-destructive testing (NDT) methods of pipelines and compare them to each other from
Pressure Control Supplier Quality Requirements Nondestructive Testing Services SQ-10 Rev: 1.1
Approved By: Jerry Longmire Vice President - Quality Jim Harris Quality Leader - NAM Document Revision Chart The following chart lists the revisions made to this document tracked by version. Use this to
Ethanol Vehicle and Infrastructure Codes and Standards Citations
Ethanol Vehicle and Infrastructure Codes and Standards Citations This document lists codes and standards typically used for U.S. ethanol vehicle and infrastructure projects. To determine which codes and
STATEMENT OF WORK (SOW) On-Call Certified Welding Inspections and Nondestructive Testing
1.0 INTRODUCTION Colorado Springs Utilities (UTILITIES) is seeking qualified firms to provide verification welding inspection services, nondestructive testing services, and technical reporting to Colorado
Mühendislik Danışmanlık Sanayi ve Ticaret Ltd. Şti.
Mühendislik Danışmanlık Sanayi ve Ticaret Ltd. Şti. COMPANY INTRODUCTION INFORMATIONS Tel: +90 212 728 8132 / +90 535 334 4912 / Fax: +90 212 728 8134 Web : www.obef.com.tr /E-mail: [email protected], Adres
Testing & Consulting Engineering. NDT Industrial Environmental D.O.T, Construction & Mechanical. www.unifiedtesting.com
Testing & Consulting Engineering NDT Industrial Environmental D.O.T, Construction & Mechanical www.unifiedtesting.com NONDESTRUCTIVE TESTING (NDT) SERVICES UTS Nondestructive Testing (NDT) Services provides
LARGE PROJECTS REQUIRE STRONG TEAMS
LARGE PROJECTS REQUIRE STRONG TEAMS INDEX urnkey autoclave ystems with high egree of safety ABOUT US CAPABILITIES AUTOCLAVES FOR... COMPOSITE GLASS LAMINATION TRUCK & OTR TIRE RETREADING BUILDING MATERIALS
NEW AND GLOBAL + OLD APPROACH PRODUCT LEGISLATION: A. Standard questionnaire to be filled for each sector individually:
IV. NEW AND GLOBAL + OLD APPROACH PRODUCT LEGISLATION: A. Standard questionnaire to be filled for each sector individually: Sector: Legal Metrology 1. Harmonisation of laws including technical regulations
REPUBLIC OF IRAQ New regulations ICIPI: Pre-Importation Inspection, Testing and Certification Program of Goods
REPUBLIC OF IRAQ New regulations ICIPI: Pre-Importation Inspection, Testing and Certification Program of Goods June 2011 G/V01 - Copyright Bureau Veritas Main objectives 1. Protect Consumers (Health &
\ srl High Technology Gear Reducers and Cardan Shafts CERTIFIED QUALITY SYSTEM: UNI ISO EN 9001:2008 ICIM 2779/2; IQNET N. IT-28236 UNIVERSAL SHAFT
UNIVERSAL SHAFT CAT CERTIFICATION CARDAN SHAFTS - COUPLINGS Alongside with the production of special gearboxes, our company has developed the production of Universal shafts, with the same high quality
NCCER 13614 Progress Blvd., Alachua, FL 32615 Tel: (888) 622-3720 E-mail: [email protected]. Task Number Item Date(s) Recorded By
NCCER 13614 Progress Blvd., Alachua, FL 32615 Tel: (888) 622-3720 E-mail: [email protected] PIPELINE MAINTENANCE On-the-Job Training Level One MODULE 66101-02 INTRODUCTION TO THE PIPELINE INDUSTRY This is
Table of Contents Introduction How to Use This Manual How to Do a Facility Audit
Table of Contents Introduction How to Use This Manual How to Do a Facility Audit OSHA Plant Safety Audit Checklist: Self-Inspection Types of Hazards Addressing the Hazards in Your Work Area Safety and
NDT Procedure for Liquid Penetrant Inspection TRINITY NDT. An ISO 9001:2008 Certified Company
NDT Procedure for Liquid Penetrant Inspection A Nondestructive testing (NDT) Procedure suitable for General Liquid/Dye Penetrant Inspections. This is a sample LPT procedure and may be required to be modified
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 45 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT 1.0 SCOPE 2 2.0 CONFLICTS
TWI INDIA CSWIP COURSE AND EXAMINATION FEES 2016 Course / Examination description. CSWIP 3.2 Senior Welding Inspector
TWI INDIA CSWIP COURSE AND EXAMINATION FEES 2016 Course / Examination description FEE CSWIP 3.0 Visual Welding Inspector Course and Examination Package 61,200 Exam only 26,500 Course Only 44,800 3.0 Retest
Pressure Piping Construction Requirements
Pressure Piping Construction Requirements AB 518 Edition 7, Rev. 0 Issued Jan. 1, 2016 Table of Contents FOREWORD... 1 1.0 SCOPE OF THIS DOCUMENT... 2 2.0 DEFINITIONS & ACRONYMS USED IN THIS DOCUMENT...
European Type Approval. for. Automotive Systems and Components
European Type Approval for Automotive Systems and Components VCA004 Page 1 of 5 Revision No 11 About VCA The Vehicle Certification Agency (VCA) is an Executive Agency of the United Kingdom Department for
Application of Welding Standards in Hong Kong. S. K. Babu Laboratory Manager - Foundation Techniques Ltd
Application of Welding Standards in Hong Kong S. K. Babu Laboratory Manager - Foundation Techniques Ltd Introduction: This paper summarizes the current welding standards practiced in Hong Kong & also outlines
DELLA FOGLIA BALL VALVES COMPANY PROFILE COMPANY PROFILE DELLA FOGLIA BALL VALVES
COMPANY PROFILE S.a.s. 21050 Marnate (VA) Italy Viale Kennedy, 149 Tel. +39 0331/602059-602171 Fax + 39 0331/604249 E-mail: [email protected] Web site:http://www.dellafoglia.it API 6D-0253 API 6A-0628
Reliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.
INDUSTRIAL SERVICES - NON-DESTRUCTIVE TESTING Reliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.com/ndt The reliability
Directive 2006/42/EC. Classification of equipment used for lifting loads with lifting machinery
1(9) Updated June 2012 Classification of equipment used for lifting loads with lifting machinery This classification was approved by the Machinery ing Group as a basis for a consistent application of the
Supplier Quality Assurance Requirements Manual
12716 EAST PINE STREET TULSA, OK 74116 Supplier Quality Assurance Requirements Manual Approved: Mike Collins Quality Assurance Manager Precise Machining & Manufacturing 1 Record of Revisions Revision D
Ravi Energie Group. Introduction
Ravi Energie Group Introduction RAVI ENERGIE GROUP Group Headquarters 1 Executive Drive, Suite 260 Somerset, NJ 08873, USA Today s Agenda Our Motivation Success Mantra About Us Our Vision Our Mission Our
Non Destructive Testing Consultancy Welding Materials Testing Training
Non Destructive Testing Consultancy Welding Materials Testing Training Introduction Applied Inspection is an ISO 9001:2008 and Link-Up accredited company providing non-destructive testing and training,
Directive 2006/42/EC Classification of equipment used for lifting loads with lifting machinery
1(7) Classification of equipment used for lifting loads with lifting machinery December 2009 This classification was approved by the Machinery ing Group as a basis for a consistent application of the term
FOR ELECTRICAL, ELECTRONIC & INFORMATION TECHNOLOGIES
PM 92E August 2004 Information on CE marking and on the EC Declaration of Conformity based on testing services and certificates of the VDE Testing and Certification Institute ASSOCIATION FOR ELECTRICAL,
Welding & Fabrication. School of Mechanical & Environmental Engineering
Welding & Fabrication School of Mechanical & Environmental Engineering Your Local College The facts 14,000 students meet new people 3 Centres all easy to access Hundreds of courses something for everyone
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17021:2011 to provide environmental management systems certification to Unit 6, Gordano Court Gordano Gate Business Park Serbert Close
BUREAU VERITAS TURKEY
BUREAU VERITAS TURKEY MEHMET OGUZ TURKEY&CASPIAN SEA IND TECHNICAL MANAGER API 653 AUTHORIZED INSPECTOR INDEX 1-BV Presentation 2-API Standards 3- Types of Storage Tanks, Storage tanks in Turkey 4-Inorrect
QUALITY DOSSIER. We Assure Quality
UALITY DOSSIER We Assure uality WE ASSURE YOU WE ASSURE YOU WE ASSURE YOU WE ASSURE YOU WE ASSURE WE ASSURE YOU WE ASSURE YOU WE ASSURE WE YOU YOU WE ASSURE YOU WE ASSURE YOU WE ASSURE WE ASSURE YOU WE
Plant Design for Oil & Gas Industry Client
Plant Design for Oil & Gas Industry Client An Enventure Case Study Enventure with its team of engineers having multi-disciplinary skills provided complete plant design, detailing and procurement services
BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap
1263050/6 IM-P126-07 ST Issue 6 BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
External Quality, Environment, Health & Safety Management Manual with Integrated Welding Engineering Manual
conferdo GmbH & Co. KG External Quality, Environment, Health & Safety Management Manual with Integrated Welding Engineering Manual of the company conferdo GmbH & Co. KG STAHLBAU OHNE GRENZEN STEELWORK
WELDING TECHNOLOGY DEGREES AND CERTIFICATES. Welding Technology Degree. Shielded Metal Arc Plate and Pipe (270 hours) Certificate
Area: Technical Education Dean: Dr. Trish Caldwell Phone: (916) 484-8354 Counseling: (916) 484-8572 www.arc.losrios.edu/~welding/ The American Welding Society (AWS) nationally accredits American River
proper way. Therefore operator training and certification is key in every inspection program to ensure compliance and improve quality and integrity.
SGS NDT Training & Examination Centre Professional Services for Your Safety and Reputation ABOUT NON DESTRUCTIVE TESTING (NDT) About NDT NDT plays a key role in assessing conformity and reliability of
Petrochemical Refinery Maintenance. Complete Maintenance Solutions
Petrochemical Refinery Maintenance Complete Maintenance Solutions The difference is our experience... Edmonton Exchanger has over 30 years of on-site maintenance and construction experience in the petrochemical
Construction. Using today s standards to build the future
Construction Using today s standards to build the future British Standards Online (BSOL) About BSI BSI (British Standards Institution) is the business standards company that equips businesses with the
Spill Prevention, Control and Countermeasure Plan (SPCC) Program
United States Environmental Protection Agency Office of Emergency Management August 2013 www.epa.gov/emergencies Spill Prevention, Control and Countermeasure Plan (SPCC) Program Bulk Storage Container
FPO. Meeting and Exceeding API Standards: How Much Testing Do Pumps Really Need? White Paper
White Paper Meeting and Exceeding API Standards: How Much Testing Do Pumps Really Need? John Bailey, API Global Product Manager Marc DeSilva, Global Product Director, Oil & Gas Plant Performance Services
Check-list for auditors. Audit visit at candidate registered laboratories
Check-list for auditors Audit visit at candidate registered laboratories 1 Contents Introduction Laboratory documentation required by the standard(s), available for inspection by the auditor Items to be
Supplying new machinery
A short guide to the law and your responsibilities when supplying machinery for use at work Introduction This leaflet can help you if you are supplying machinery for use at work. It explains the main health
Engineered Solutions
Engineered Solutions Long established partnerships bring together the world s leading instrumentation companies within BKW. Our manufacturing facility enables us to quickly adapt standard instruments to
Non-Destructive Testing Services, Inc. www.nondestructivetesting.com
Non-Destructive Testing Services, Inc. www.nondestructivetesting.com NON-DESTRUCTIVE TESTING SERVICES (NDTS) Non-Destructive Testing Services, Inc. (NDTS) is a full-service inspection company providing
Static Electricity. A Health and Safety Guideline for Your Workplace. What Are Some Sources of Static Electricity? What is Static Electricity?
A Health and Safety Guideline for Your Workplace What is static electricity? What causes it? How is it hazardous? And, most importantly, how can it be controlled? All of these questions will be answered
Cable Trays and Ducts (Metallic)
p pproval roramms for U rcos orasato Mutual coto (M)No. 2.9 STANDARD FOR CERTIFICATION Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-P009 Cable
METALSCAN INSPECTION SERVICES SHORT TERM COURSES QA/QC ENGINEERS / INSPECTORS. Suitable for Mechanical Engineers
METALSCAN INSPECTION SERVICES Offers SHORT TERM COURSES For QA/QC ENGINEERS / INSPECTORS Suitable for Mechanical Engineers Free Seminar on QA/QC and NDT In every Month NDT Training and Certification Internship
IAF Mandatory Document. Witnessing Activities for the Accreditation of Management Systems Certification Bodies. Issue 1, Version 2 (IAF MD 17:2015)
IAF Mandatory Document Witnessing Activities for the Accreditation of Management Systems Certification Bodies (IAF MD 17:2015) Witnessing Activities for the Accreditation Page 2 of 18 The (IAF) facilitates
COMPANY PROFILE. PROKO CONSTRUCTION INDUSTRY LTD. Yenikent Mh. 2477.Sk. No:2/A D:1 T: +90 262 721 44 10 F: +90 262 721 44 11
COMPANY PROFILE PROKO CONSTRUCTION INDUSTRY LTD. Yenikent Mh. 2477.Sk. No:2/A D:1 T: +90 262 721 44 10 41400, Gebze, KOCAELİ F: +90 262 721 44 11 www.prokoyapi.com [email protected] CORPORATE Domestically
Bent cold drawn seamless tubes for energy applications. U-tubes, S-tubes and free form-tubes
Bent cold drawn seamless tubes for energy applications U-tubes, S-tubes and free form-tubes SMP International Salzgitter Mannesmann Précision Etirage plant, Vitry Le François, France Salzgitter Mannesmann
Asset Management Conformity Assessment Fitness for Service QHSE. Oil & Gas Services and Tools. For the benefit of business and people
Asset Management Conformity Assessment Fitness for Service QHSE Oil & Gas Services and Tools For the benefit of business and people Services along the whole life of Facilities Bureau Veritas services can
CLASSIFICATION SYSTEM BY FIELD AND SUB-FIELD OF EXPERTISE SUPPLIERS REGISTRY OF GOODS AND SERVICES ENAP GROUP OF COMPANIES I. Suppliers are classified in three groups: Classification Equipments, materials
Quality Management Systems & Certification Consulting
the development, implementation and maintenance of Quality Management Systems controlling in compliance the essential withactivities the American of your Petroleum business, Institute to continually (API),
Handbook. Purchasing Guidelines. API Monogram Equipment. Purchase API Specs online at www.global.ihs.com
Handbook Revision 10.01.09 Purchasing Guidelines Handbook API Monogram Copyright 2009 -. All rights reserved. Handbook Revision 10.01.09 Practical Guidelines for Making Practical Choices Dear Colleagues,