NOTE: If the HF body is stamped HFK, then the cage is replaceable. HF N E S C B 2 H C 5 FT 3/8 x 1/2 ODF S/T Valve Series

Transcription

1 The HF series is a balanced ported valve designed for refrigeration, air conditioning and heat pump applications. Features Stainless steel replaceable power element eliminates corrosion and prevents valve failure Two body sizes provide capacities from /4 to 0 tons Standard Body HF & HFK The HF is offered several ways: Pre-packaged HFK service kits Include a mix of bodies and power elements with a complete set of cages to serve the most applications with a minimum of parts Individual components Bodies, cages, & power elements may be ordered separately Finished valves Assembled valves ready for immediate installation Bi-Flow capability up to 5- tons R- allows one valve to control the superheat in both cooling and heating modes Extended Body HF Capacity range from 8 to 0 tons (R-) Finished valve only NOTE: If the HF body is stamped HFK, then the cage is replaceable. Options ODF or SAE connections Straight-through or angle flow configurations Removable inlet strainer (ODF only) Internal or external equalizer Specifications Maximum working pressure: 450 psig UR/CUR file number: SA53 Nomenclature example: SC HC 5 FT 3/8 x ODF S/T HF N E S C B H C 5 FT 3/8 x ODF S/T Valve Series Equalizer Charge Code Connection Type Configuration Balanced Port Design Superheat Adjustment N = Non- Adjustable Omit for Adjustable E=External (Omit for Internal) Connection Type S = Solder (Omit for SAE Flare) Removable Inlet Strainer (optional) C = Inlet Strainer (ODF only) Bleed Hole (optional) (Omit for no bleed hole) Capacity Nominal Rating in Tons (See nominal capacity table below) + = R-, R-34a, R-450A and R-53A are interchangeable refrigerant charges * =, R-50, R-404A, R-448A and R-449A are interchangeable refrigerant charges = R- and are interchangeable refrigerant charges Refrigerant Code +F = R- H = R- +M = R-34a N = * P = * R = R-50 * S = R-404A *B = R-448A /R-449A +D=R-450A /R-53A C = medium temp CA = heat pump W(MOP) = press. limiting Z = low temp AA = wide range Capillary Tube Length 5 FT (std) Inlet x Outlet Connection Sizes /4 x 3/8 3/8 x SAE = flare ODF = solder ANG = 90 angle S/T = straight-thru HF Series-Nominal* Capacity Tables in Tons (kw) Standard Body HF R- R-34a R-450A/ R-53A R-/ R-50/ R-404A/ **R-448A/ R-449A /8 (0.4) /4 (0.9) /5 (0.7) /4 (0.9) /8 (0.4) /4 (0.9) /4 (0.9) (.8) /4 (0.9) (.8) /4 (0.9) (.8) (.8) 3/4 (.7) (.8) (3.5) (.8) (3.5) (3.5) (3.5) 3/4 (.7) ½ (5.3) (3.5) - (5.3) ¼ (4.4) ½ (5.3) (3.5) (7.0) ¼ (4.4) (7.0) ½ (5.3) ¾ (6.) ½ (5.3) ½ (8.8) ½ (5.3) - (9.0) (7.0) ½ (8.8) (7.0) 3 (.0) (7.0) 3- (.0) 3½ (.0) 4 (4.0) 3½ (.0) 5½ (0.0) 3½ (.0) 6 (.0) Extended Body HF R- R-34a R-450A/ R-53A R-/ R-50/ R-404A/ **R-448A/ R-449A 5 (7.0) 6 (.) 4½ (6.0) 8 (8.0) 5 (7.0) 8½ (30.0) 6 (.0) 7½ (7.0) 6 (.0) 0 (35.0) 7 (7.0) 0½ (37.0) 9 (3.0) (39.0) 9 (3.0) 5 (53.0) 0 (35.0) 6 (56.0) (4.0) 4 (50.0) ½ (40.0) 0 (70.0) 3 (46.0) 0 (70.0) All capacities shown are at 00 F condensing, 40 F evaporator temperature. *See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750. **Use SZ charge for all R-448A/R-449A applications. Recommend oversizing the valve capacity by 50% for low temperature applications. 004FC-8 R6 (0/6) TXV 8

2 Dimensional Data Standard Body HF ¼ thru 5½ tons R- HF SAE Connection Size Inlet Outlet A B C /4 SAE SAE 3. 3/8 SAE SAE SAE ODF ODF w/optional strainer at inlet Extended Body HF 8, 0, 5 & 0 ton R HF ODF Connection Size A± Inlet Outlet.00 B±.00 C MIN D MIN /4 ODF 3/8 ODF /8 ODF ODF /8 ODF ODF E F ODF 004FC-8 R6 (0/6) TXV 9

3 Ordering Information Use the following tables to order individual components. HFK Body Selection Table PCN Description Type Connections (Inlet x Outlet) KT-098- HFK /4 x SAE Ang Inlet KT-098- HFK 3/8 x SAE Ang Inlet KT HFKE /4 x SAE Ang Inlet KT HFKE 3/8 x SAE Ang Inlet KT HFKSC 3/8 x ODF Ang Inlet w/ Strainer KT HFKESC 3/8 x ODF Ang Inlet w/ Strainer KT HFKS 3/8 x ODF S/T KT HFKS 3/8 x 5/8 ODF S/T KT HFKS x 5/8 ODF S/T KT HFKS x 7/8 ODF S/T KT-098- HFKES 3/8 x ODF S/T KT-098- HFKES 3/8 x 5/8 ODF S/T KT HFKES x 5/8 ODF S/T KT HFKES x 7/8 ODF S/T HF & HFK Power Element Table PCN Description System Refrigerant(s) Application X6300-FW5- R-34a/R- Low Temp MOP X6300-FW35- R-34a/R- Low Temp MOP X6300-FW55- R-34a/R- Low Temp MOP X6300-FZ- R-34a/R- Low Temp X6300-FC- R-34a/R- Medium Temp X6300-MC- R-34a Medium Temp X6300-HZ- R-/ Low Temp X6300-HCA- R-/ Heat Pump X6300-HW00- R-/ AC MOP X6300-HC- R-/ A/C Med. Temp X6300-SW45- R-404/ / R-50 Low Temp MOP X6300-SZ- R-404/ / R-50 Low Temp X6300-SC- R-404/ / R-50 Medium Temp HFK Cage Nominal* Capacity Table PCN Description Cage Code R- R- R-34a R-404 R KT ⅛ ¼ ¼ ⅛ ⅛ ⅛ ¼ KT-099- ¼ ½ ½ ¼ ¼ ¼ ½ KT-099- ½ ¾ ½ ½ ½ KT ½ ½ KT ¼ ½ ¼ ¼ ¼ KT ½ ½ ¾ ½ ½ ½ ½ KT ½ KT ½ 5½ 4 3½ 3½ 3½ 5½ Cage Kit includes Cage, Insertion Tool and ID Clips. *All capacities shown are at 00 F condensing, 40 F evaporator temperature. See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750. Replacement Parts SAE Inlet PCN Part Number Description X-76-3/8 Inlet Filter Screen Seal Cap X-76-7 /4 Inlet Filter Screen Replacement Parts- HFSC & SC Only PCN Kit Number Description KT-064 Includes seal cap, gasket o-ring, screen, spring Cage Kit (PCN ) Item Qty Size 0 Cage (/4 ton R-) Size Cage ( ton R-) Size Cage ( ton R-) Size 3 Cage ( ton R-) Size 4 Cage ( ton R-) Size 5 Cage ( ton R-) Size 6 Cage (3 ton R-) Size 7 Cage (5 ton R-) Insertion Tool Oil Bottle Cage ID Tags 6 HFK Accessories PCN Description Cage Box (Empty) Insertion Tool Oil Bottle Cage Gasket Kit ( sets) 004FC-8 R6 (0/6) TXV 0

4 Ordering Information HFK Pre-Packaged Kits The HFK is a pre-packaged kit consisting of a mix of popular bodies and power elements with a complete selection of cages. These kits provide great flexibility allowing valves to be assembled as needed for each application. Three kits are provided as shown below, along with the cage kit which is included in each pre-packaged kit. In addition, custom kits can be assembled by stocking an empty kit case with desired components. SAE/ODF Kit (PCN 06535) Item Qty SAE Kit (PCN ) Item Qty ODF Kit (PCN ) Item Qty Cage Kit (PCN ) Item Qty HFK 3/8 x SAE ANG HFK /4 X ½ Body HFKSC 3/8 X ½ Body Size 0 Cage (/4 ton R-) HFKE 3/8 x SAE ANG HFK 3/8 X ½ Body HFKES 3/8 X ½ Body Size Cage ( ton R-) HFKS 3/8 x ODF S/T HFKE 3/8 X ½ Body HFKESC 3/8 X ½ Body Size Cage ( ton R-) HFKES 3/8 x ODF S/T FC Power Element FC Power Element Size 3 Cage ( ton R-) Cage Kit (PCN ) HC Power Element HC Power Element Size 4 Cage ( ton R-) Insertion Tool (PCN ) HZ Power Element HZ Power Element Size 5 Cage ( ton R-) Service Box SZ Power Element SZ Power Element Size 6 Cage (3 ton R-) FC Power Element Cage Kit (PCN ) Cage Kit (PCN ) Size 7 Cage (5 ton R-) FZ Power Element Insertion Tool HC Power Element Oil Bottle HZ Power Element Cage ID Tags 6 SC Power Element SW45 Power Element HFK Assembly Procedure (see 6 assembly steps & diagrams below). Remove adjusting stem assembly from body with 5/6 wrench.. Lubricate both o-rings on cage. 3. Insert cage into body with driver and insertion tool and hand tighten. (Do not over-tighten) 4. Replace adjustment stem assembly to body and hand tighten. Use the 5/6 wrench to tighten adjustment stem assembly 60 or one wrench flat. ( inch lbs. - Do not over-tighten) 5. Attach cage identification clip on power element cap tube. 6. Screw power element to top of valve body and hand tighten. Use the wrench to tighten power element 60 or one wrench flat. ( inch lbs. - Do not over-tighten) 004FC-8 R6 (0/6) TXV

5 Ordering Information Use the following tables to order factory assembled valves. HF Series Internally Equalized /4 FC /4 X SAE ANG 5 FT 0098 FC 3/8 X SAE ANG 5 FT FC /4 X SAE ANG 5 FT FC 3/8 X ODF ANG 5 FT R- FC 3/8 X ODF S/T 5 FT HF FC 3/8 X SAE 5 FT HFS FC 3/8 X SAE ANG 5 FT FC 3/8 X ODF S/T 5 FT 0569 FC 3/8 X SAE ANG 5 FT ½ FC 3/8 X SAE ANG 5 FT FC 3/8 X SAE 5 FT MC 3/8 X ODF ANG 5 FT R-34a /4 MC 3/8 X SAE ANG 5 FT R- HF MC 3/8 X ODF S/T 5 FT R-450A HFS MC 3/8 X SAE ANG 5 FT R-53A MC 3/8 X ODF S/T 5 FT HC /4 X SAE ANG 5 FT HC 3/8 X ODF ANG 5 FT /4 HC 3/8 X ODF S/T 5 FT HC 3/8 X SAE 5 FT 0549 HZ /4 X SAE ANG 5 FT HZ 3/8 X ODF S/T 5 FT HC /4 X SAE ANG 5 FT 0098 HC 3/8 X ODF ANG 5 FT HC 3/8 X ODF S/T 5 FT HC 3/8 X SAE 5 FT HZ 3/8 X SAE 5 FT R- HF HC 3/8 X ODF ANG 5 FT HFS HC 3/8 X ODF S/T 5 FT HC 3/8 X SAE 5 FT HZ 3/8 X SAE 5 FT HC 3/8 X ODF ANG 5 FT ½ HC 3/8 X ODF S/T 5 FT HC 3/8 X SAE 5 FT HC 3/8 X SAE 5 FT HZ 3/8 X SAE ANG 5 FT ½ HC 3/8 X SAE 5 FT HC 3/8 X SAE 5 FT HC 3/8 X ODF S/T 5 FT SC /4 X 30 IN /4 SW45 /4 X 30 IN SZ /4 X 30 IN SC /4 X 30 IN SW45 /4 X 30 IN SZ /4 X 30 IN 0665 SC 3/8 X ODF S/T 5 FT R-404A SW45 3/8 X 5 FT 0665 HF SZ 3/8 X 5 FT R-50 HFS SC 3/8 X 5 FT **R-448A **R-449A ½ SW45 3/8 X 5 FT SZ 3/8 X 5 FT SC 3/8 X 5 FT SW45 3/8 X 5 FT SZ 3/8 X 5 FT SC 3/8 X 5 FT ½ SW45 3/8 X 5 FT SZ 3/8 X 5 FT **Use SZ charge for all R-448A/R-449A applications. Recommend oversizing the valve by 50% for low temperature applications. 004FC-8 R6 (0/6) TXV

6 HF Series Internally Equalized (continued) RC /4 X SAE ANG 5 FT RC 3/8 X ODF ANG 5 FT /4 RC 3/8 X SAE 5 FT RZ /4 X 3/8 ODF S/T 5 FT RZ 3/8 X ODF S/T 5 FT 0568 RZ 3/8 X SAE 5 FT RC 3/8 X SAE 5 FT RZ 3/8 X ODF ANG 5 FT HF RZ 3/8 X ODF S/T 5 FT R-50 HFS RZ 3/8 X SAE 5 FT RC 3/8 X SAE 5 FT RC 3/8 X SAE ANG 5 FT RZ 3/8 X ODF ANG 5 FT RZ 3/8 X SAE 5 FT ½ RC 3/8 X SAE 5 FT RZ 3/8 X SAE 5 FT RC 3/8 X SAE 5 FT ½ RC 3/8 X SAE 5 FT FC-8 R6 (0/6) TXV 3

7 Ordering Information (continued) HF Series Externally Equalized (continued) /4 FC 3/8 X SAE ANG 5 FT FC /4 X SAE ANG 5 FT FC 3/8 X ODF ANG 5 FT 0560 FC 3/8 X ODF S/T 5 FT FC 3/8 X SAE ANG 5 FT R- R-34a R- R-450A R-53A R- S S S FC 3/8 X ODF ANG 5 FT FC 3/8 X ODF S/T 5 FT 0565 FC 3/8 X SAE ANG 5 FT ½ FC 3/8 X ODF ANG 5 FT FC 3/8 X SAE ANG 5 FT FC 3/8 X ODF S/T 5 FT FC 3/8 X SAE ANG 5 FT ½ FC 3/8 X SAE ANG 5 FT /4 MC 3/8 X SAE ANG 30 IN MC 3/8 X ODF S/T 5 FT MC 3/8 X SAE ANG 5 FT MC 3/8 X ODF ANG 5 FT /4 MC 3/8 X SAE ANG 30 IN MC 3/8 X ODF S/T 5 FT 0594 MC 3/8 X ODF ANG 5 FT MC 3/8 X ODF S/T 5 FT MC 3/8 X SAE ANG 5 FT ½ MC 3/8 X SAE ANG 5 FT MC 3/8 X ODF S/T 5 FT ¾ MC 3/8 X SAE 5 FT 0585 MC 3/8 X SAE ANG 5 FT MC 3/8 X SAE ANG 5 FT MC 5/8 X 7/8 ODF S/T 5 FT MC 5/8 X 7/8 ODF S/T 5 FT MC 7/8 X /8 ODF S/T 5 FT MC 7/8 X 3/8 ODF S/T 5 FT HC 3/8 X ODF S/T 5 FT /4 HC 3/8 X SAE 5 FT HZ 3/8 X SAE 5 FT HC /4 X SAE ANG 5 FT HC 3/8 X ODF ANG 5 FT HC 3/8 X ODF S/T 5 FT HC 3/8 X SAE 5 FT HZ 3/8 X ODF S/T 5 FT HZ 3/8 X SAE 5 FT HC 3/8 X ODF ANG 5 FT HC 3/8 X ODF S/T 5 FT HC 3/8 X SAE 5 FT HW 35 3/8 X SAE 5 FT HZ 3/8 X SAE 5 FT HC 3/8 X ODF ANG 5 FT HC 3/8 X ODF S/T 5 FT ½ HC 3/8 X SAE 5 FT HZ 3/8 X ODF S/T 5 FT HZ 3/8 X SAE 5 FT HC 3/8 X ODF S/T 5 FT HC 3/8 X SAE 5 FT HC 3/8 X ODF ANG 5 FT HZ 3/8 X SAE 5 FT HC 3/8 X ODF ANG 5 FT ½ HC 3/8 X ODF S/T 5 FT HC 3/8 X SAE 5 FT HC 3/8 X ODF ANG 5 FT HC 3/8 X ODF S/T 5 FT HC 3/8 X SAE 5 FT HC X 5/8 ODF ANG 5 FT HCA 3/8 X ODF S/T 5 FT HCA X 5/8 ODF S/T 5 FT HZ 3/8 X ODF S/T 5 FT HZ 3/8 X SAE 5 FT FC-8 R6 (0/6) TXV 4

8 Ordering Information (continued) HF Series Externally Equalized (continued) HC 3/8 X ODF S/T 5 FT 0544 HC 3/8 X SAE 5 FT HC X 5/8 ODF ANG 5 FT HC X 7/8 ODF S/T 5 FT ½ HC 5/8 X 7/8 ODF S/T 5 FT HCA 3/8 X ODF S/T 5 FT HCA X 5/8 ODF ANG 5 FT HZ 3/8 X ODF S/T 5 FT HZ 3/8 X SAE 5 FT R- R-404A R-50 **R-448A **R-449A S S HC X 5/8 ODF S/T 5 FT HC 5/8 X /8 ODF ST 5 FT HCA X 7/8 ODF S/T 5 FT HCA 5/8 X /8 ODF ST 5 FT HC X 5/8 ODF S/T 5 FT HC 5/8 X 7/8 ODF S/T 5 FT HC 7/8 X /8 ODF S/T 5 FT HCA 5/8 X 7/8 ODF S/T 5 FT HCA 58 X /8 ODF S/T 5 FT 0568 HC 5/8 X /8 ODF S/T 5 FT HC 5/8 X 7/8 ODF S/T 5 FT HC 7/8 X /8 ODF S/T 5 FT HCA 5/8 X /8 ODF S/T 5 FT HCA 5/8 X 7/8 ODF S/T 5 FT HCA 7/8 X /8 ODF S/T 5 FT HC 7/8 X /8 ODF S/T 5 FT HCA 7/8 X /8 ODF S/T 5 FT SC /4 X ODF S/T 30IN /4 SW 45 3/8 X ODF S/T 5 FT SW 45 3/8 X SAE ANG 5 FT SZ 3/8 X ODF S/T 5 FT SC 3/8 X ODF ANG 5 FT SW 45 3/8 X ODF S/T 5 FT SW 45 3/8 X SAE ANG 5 FT SZ 3/8 X ODF ANG 5 FT SZ 3/8 X ODF S/T 5 FT SC 3/8 X ODF S/T 5 FT SC 3/8 X ODF ANG 5 FT SW 45 3/8 X ODF ANG 5 FT SW 45 3/8 X SAE ANG 5 FT SW 45 3/8 X ODF S/T 5 FT SZ 3/8 X ODF S/T 5 FT SC 3/8 X ODF ANG 5 FT ¼ SW 45 3/8 X ODF S/T 5 FT SZ 3/8 X ODF S/T 5 FT SC 3/8 X ODF S/T 5 FT ½ SW 45 3/8 X ODF S/T 5 FT SW 45 3/8 X SAE ANG 5 FT SZ 3/8 X ODF S/T 5 FT SC 3/8 X ODF S/T 5 FT SW 45 3/8 X ODF S/T 5 FT SW 45 3/8 X SAE ANG 5 FT SZ 3/8 X ODF S/T 5 FT SC 3/8 X ODF S/T 5 FT ½ SC 5/8 X 7/8 ODF S/T 5 FT 065 SW 45 X 5/8 ODF S/T 5 FT SZ X 5/8 ODF S/T 5 FT SW 45 5/8 X 7/8 ODF S/T 5 FT SC 5/8 X 7/8 ODF S/T 5 FT SZ 5/8 X 7/8 ODF S/T 5 FT SC 5/8 X 7/8 ODF S/T 5 FT SW45 5/8 X 7/8 ODF S/T 5 FT SZ 5/8 X 7/8 ODF S/T 5 FT 0649 SC 5/8 X 7/8 ODF S/T 5 FT SW 45 5/8 X 7/8 ODF S/T 5 FT SZ 5/8 X 7/8 ODF S/T 5 FT 0688 **Use SZ charge for all R-448A/R-449A applications. Recommend oversizing capacity by 50% for low temperature applications. 004FC-8 R6 (0/6) TXV 5

9 Ordering Information (continued) HF Series Externally Equalized (continued) R-50 R-50 (S) (S) /4 ½ 3½ 5 7 RC 3/8 X SAE 5 FT RC 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT RZ 3/8 X SAE 5 FT RC 3/8 X ODF ANG 5 FT RC 3/8 X ODF S/T 5 FT 0560 RC 3/8 X SAE 5 FT RW 45 3/8 X ODF ANG 5 FT RW 45 3/8 X SAE 5 FT RZ 3/8 X ODF ANG 5 FT RZ 3/8 X ODF S/T 5 FT RZ 3/8 X SAE 5 FT RC 3/8 X ODF ANG 5 FT RC 3/8 X ODF S/T 5 FT RC 3/8 X SAE 5 FT RW 45 3/8 X SAE 5 FT RZ 3/8 X ODF ANG 5 FT RZ 3/8 X ODF S/T 5 FT 0565 RZ 3/8 X SAE 5 FT RC 3/8 X ODF ANG 5 FT RC 3/8 X ODF S/T 5 FT RC 3/8 X SAE 5 FT RW 45 3/8 X ODF ANG 5 FT RW 45 3/8 X ODF S/T 5 FT RW 45 3/8 X SAE 5 FT RZ 3/8 X ODF ANG 5 FT RZ 3/8 X SAE 5 FT RC 3/8 X ODF ANG 5 FT RC 3/8 X ODF S/T 5 FT RC 3/8 X SAE 5 FT RW 45 3/8 X SAE 5 FT RZ 3/8 X ODF S/T 5 FT 0537 RZ 3/8 X ODF ANG 5 FT RZ 3/8 X SAE 5 FT RC 3/8 X ODF ANG 5 FT RC 3/8 X ODF S/T 5 FT RC 3/8 X SAE 5 FT 0544 RW 45 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT RZ 3/8 X ODF S/T 5 FT RZ 3/8 X SAE 5 FT RC 3/8 X ODF S/T 5 FT RC 5/8 X 7/8 ODF S/T 5 FT RW 45 5/8 X 7/8 ODF S/T 5 FT RZ X 5/8 ODF ANG 5 FT 0696 RC 5/8 X 7/8 ODF S/T 5 FT RW 45 5/8 X 7/8 ODF S/T 5 FT RC 5/8 X 7/8 ODF S/T 5 FT * For interchangeable refrigerant charges R-34a, R-, R-450A/R-53A, R-404A,, R-50, R-448A/R-449A and R-/, the tons of capacity shown in the table are for the first (primary) refrigerant listed. Consult the Nominal Capacity Table for determining the tons of capacity for the secondary refrigerants listed. Example: A /4 ton R- valve is required. What R-34a ton valve should be selected? Solution: From the Nominal Capacity Table, a ton R-34a valve is equivalent to a /4 ton R- valve. 004FC-8 R6 (0/6) TXV 6

10 Ordering Information (continued) SC Series Externally Equalized (continued) FC 3/8 X ODF ANG 5 FT R- SC FC 3/8 X ODF ANG 5 FT ½ FC 3/8 X ODF ANG 5 FT R-34a /4 MC 3/8 X ODF ANG 5 FT MC 3/8 X ODF ANG 5 FT R- SC MC 3/8 X ODF ANG 5 FT R-450A ½ MC 3/8 X ODF ANG 5 FT R-53A ½ MC 3/8 X ODF ANG 5 FT 0584 /4 HC 3/8 X ODF ANG 5 FT HZ 3/8 X ODF ANG 5 FT HC 3/8 X ODF ANG 5 FT 0579 HZ 3/8 X ODF ANG 5 FT HC 3/8 X ODF ANG 5 FT HZ 3/8 X ODF ANG 5 FT R- R-50 R-404A **R-448A **R-449A SC SC ½ HC 3/8 X ODF ANG 5 FT 0579 HZ 3/8 X ODF ANG 5 FT 0573 HZ 3/8 X ODF ANG 5 FT HC 3/8 X ODF ANG 5 FT ½ HC 3/8 X ODF ANG 5 FT 0574 HZ 3/8 X ODF ANG 5 FT HC 3/8 X ODF ANG 5 FT 0574 HZ 3/8 X ODF ANG 5 FT ½ HC 3/8 X ODF ANG 5 FT HC 3/8 X ODF ANG 5 FT SC /4 X ODF ANG 30 IN /4 SW45 /4 X ODF ANG 30 IN SZ /4 X ODF ANG 30 IN ½ 3½ /4 ½ ½ 5 SC /4 X ODF ANG 30 IN SW45 /4 X ODF ANG 30 IN SZ /4 X ODF ANG 30 IN SC 3/8 X ODF ANG 5 FT SW45 3/8 X ODF ANG 5 FT SZ 3/8 X ODF ANG 5 FT 0588 SC 3/8 X ODF ANG 5 FT 0589 SW45 3/8 X ODF ANG 5 FT SZ 3/8 X ODF ANG 5 FT 058 SC 3/8 X ODF ANG 5 FT 058 SW45 3/8 X ODF ANG 5 FT 058 SZ 3/8 X ODF ANG 5 FT 0584 SC 3/8 X ODF ANG 5 FT SW45 3/8 X ODF ANG 5 FT SZ 3/8 X ODF ANG 5 FT SC 3/8 X ODF ANG 5 FT 0580 SW45 3/8 X ODF ANG 5 FT 058 SZ 3/8 X ODF ANG 5 FT SC 5/8 X 7/8 ODF ANG 5 FT SW45 5/8 X 7/8 ODF ANG 5 FT SZ 5/8 X 7/8 ODF ANG 5 FT SC 5/8 X 7/8 ODF ANG 5 FT 0649 SW45 5/8 X 7/8 ODF ANG 5 FT SZ 5/8 X 7/8 ODF ANG 5 FT RC 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT RC 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT RC 3/8 X ODF ANG 5 FT RW 45 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT RC 3/8 X ODF ANG 5 FT RW 45 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT 0573 RC 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT RC 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT RC 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT *For interchangeable refrigerant charges R-34a, R-, R-450A/R-53A, R-404A//R-50/R-448A/R-449A and R-/ the tons of capacity shown in the table are for the first (primary) refrigerant listed. Consult the Nominal Capacity Table for determining the tons of capacity for the secondary refrigerants listed. Example: A /4 ton R- valve is required. What R-34a ton valve should be selected? Solution: From the Nominal Capacity Table, a ton R-34a valve is equivalent to a /4 ton R- valve. **Use SZ charge for all R-448A/R-449A applications. Recommend oversizing capacity by 50% for low temperature applicatiosn. 004FC-8 R6 (0/6) TXV 7

11 HFSC Series Internally Equalized R-34a /4 MC 3/8 X ODF ANG 5 FT R- HFSC R-450A MC 3/8 X ODF ANG 5 FT R-53A /4 HC 3/8 X ODF ANG 5 FT HC 3/8 X ODF ANG 5 FT R- HFSC HZ 3/8 X ODF ANG 5 FT HC 3/8 X ODF ANG 5 FT HC 3/8 X ODF ANG 5 FT SC 3/8 X ODF ANG 5 FT /8 SW45 /4 X ODF ANG 30 IN SZ /4 X ODF ANG 30 IN SC 3/8 X ODF ANG 5 FT /4 SW45 /4 X ODF ANG 30 IN SZ /4 X ODF ANG 30 IN R-404A R-50 **R-448A **R-449A HFSC R-50 HFSC ¼ /4 SC 3/8 X ODF ANG 5 FT SW45 /4 X ODF ANG 30 IN SZ /4 X ODF ANG 30 IN SC 3/8 X ODF ANG 5 FT 0585 SW45 3/8 X ODF ANG 5 FT SZ 3/ X ODF ANG 5 FT SC 3/8 X ODF ANG 5 FT 0585 SW45 3/8 X ODF ANG 5 FT SZ 3/8 X ODF ANG 5 FT RC 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT RC 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT RC 3/8 X ODF ANG 5 FT RZ 3/8 X ODF ANG 5 FT * For interchangeable refrigerant charges R-34a, R-, R-450A/R-53A, R-404A//R-50, R-448A/R-449A and R-/ the tons of capacity shown in the table are for the first (primary) refrigerant listed. Consult the Nominal Capacity Table for determining the tons of capacity for the secondary refrigerants listed. Example: A /4 ton R- valve is required. What R-34a ton valve should be selected? Solution: From the Nominal Capacity Table, a ton R-34a valve is equivalent to a /4 ton R- valve. **Use SZ charge for all R-448A/R-449A applications. Recommend oversizing capacity by 50% for low temperature applications. 004FC-8 R6 (0/6) TXV 8