W 260: Standard photoelectric switch series for a broad range of applications
|
|
- Jacob Kennedy
- 7 years ago
- Views:
Transcription
1 W 0 Photoelectric switches Photoelectric proximity switches, BGS Photoelectric proximity switches, energetic Photoelectric reflex switches W 0: Standard photoelectric switch series for a broad range of applications universal voltage... V DC and...0 V AC with potential-free relay contact (SPD) or, alternatively, adjustable time delay. Proximity mode hrough-beam photoelectric switches Photoelectric switches with fibre-optic cable Photoelectric switches with fibre-optic cable hrough-beam mode he W 0 series with its impressive scanning ranges and features has been specially designed for a wide variety of different applications. he sensors, through-beam photoelectric switches, energetic photoelectric proximity switches, and photoelectric reflex switches with background suppression are contained in robust plastic housings. Handling is simple and user-friendly. wo supply voltages are available: low voltage V DC with PNP or NPN transistor switching output and test input and A variety of features make these sensors particularly operatorfriendly. hese include visible red transmitted light used as an alignment aid, or the simple and flexible connection system, glass/stainless steel fibre-optic cables for harsh operating conditions in confined environments. All of these benefits open up applications far beyond handling/warehousing systems, the packaging industry and wood working. All device variants have been granted UL and CSA approval. One last highlight: the W 0 complies with EN 00- (interference radiation). his makes it the perfect sensor solution for door and gate control systems in underground garages and for use in residential blocks or hotels. SENSICK CAALOGUE
2 W 0 n WS/WE 0 through-beam photoelectric switches and W 0 photoelectric proximity switches used for monitoring contours in palletisation systems to ensure that no problems are encountered during packaging. b A W 0 photoelectric proximity switch controlling a commissioning system used in the wood-working industry. v CE conformity to EN 00- and, therefore, the right choice for residential and commercial applications: the WL 0 photoelectric reflex switch used to monitor the closing edges in automatic door and gate systems. v WS/WE 0 through-beam photoelectric switches used for detecting the outline of vehicle bodies on assembly lines in the automotive industry. SENSICK CAALOGUE
3 W 0 Photoelectric proximity switches, background suppression, infrared light -- DC mm Photoelectric proximity switches Reliable detection of dark objects even against light backgrounds continuously adjustable erminal chamber or M plug, -pin or -pin est input Pre-failure signalling output Dimensional drawing 9... max Adjustments possible W 0-P 0 W 0-P 0 W 0-P 0 SENS L D MODE 9 9 Standard direction of material being scanned Centre of optical axis, receiver Centre of optical axis, sender Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at bottom or rear; or M equipment plug bottom LED signal strength indicator, red hrough hole l. mm on both sides for M hex nut adjustment Light-/dark-switching (L = light-switching, D = dark-switching) erminals C V Connection types W 0-P 0 W 0-P 0 W 0-P 0 Accessories page Cable receptacles M 9 Mounting brackets* 0 * included with delivery erminals -pin, M -pin, M L+ L+ L+ M M M Q Q Q VMA VMA E E E SENSICK CAALOGUE
4 W 0 echnical data W 0- P0 P0 P0 Max.: mm, adjustable ) Min.:...0 mm, adjustable ) Adjustable, potentiometer 0 Light source ), light type LED, infrared light Light spot diameter Approx. mm at 00 mm Aperture angle sender Approx.. Supply voltage V s V DC ) Ripple ) V SS Current consumption ) ma Switching outputs PNP, open collector: Q Output current I A max. 00 ma Light receiver, switching mode Light-/dark-switching by sliding switch Response time ) ms Max. switching frequency ) 0/s Pre-failure signalling output VMA ) 00 ma, static est input E sender off PNP: E to + V S Connection types erminal chamber Plug M, -pin VDE protection class 9) Circuit protection 0) Plug M, -pin V A, B, C, D Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS; optics: PC ) Object with 90 % remission (based on standard white DIN 0) ) Average service life 00,000 h at A = + C ) Limit values ) Must be within V S tolerances ) Without load ) With resistive load ) With light/dark ratio : ) Operating reserve < 0 % 9) Reference voltage 0 V DC 0) A = V s connections reverse-polarity B = Inputs/outputs reverse-polarity C = Interference suppression D = Outputs overcurrent and shortcircuit ) Black = % remission Grey = % remission White = 90 % remission A 9 0 B 0 00 A 0 B 0 A 0 B (mm) Scanning range on black ) /background white Scanning range on grey ) /background white Scanning range on white ) /background white A control set to MIN B control set to MAX % of scanning distance %/90% (mm) %/90% 90%/90% Order information ype Part no. W 0-P W 0-P W 0-P 0 0 SENSICK CAALOGUE 9
5 W 0 Photoelectric proximity switches, background suppression, infrared light -- UC mm Photoelectric proximity switches Reliable detection of dark objects even against light backgrounds continuously adjustable erminal chamber Dimensional drawing.. Universal current supply, relay output, SPS, timer optional Adjustments possible Standard direction of material being scanned W 0-S 0 W 0-R 0 Centre of optical axis, receiver Centre of optical axis, sender Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at SENS. MODE L. D. 9 SENS. MODE IMER 0 L. D. 0. (SEC) OUPU IMER MODE O.S.D..D..D. NORMAL 9 0 bottom or rear LED signal strength indicator, red hrough hole l. mm on both sides for M hex nut adjustment Light/dark rotary switch (L. = light-switching, D. = dark-switching) ime range control erminals Red LED status indicator; switching output active ime delay selector switch O.S.D. = One Shot.D. = delay.d. = delay C V Connection type ime delay Normal = No delay W 0-S 0 W 0-R 0 t = 0. s Light beam Uninterrupted Accessories page Mounting brackets* 0 * included with delivery erminals L N imer mode NORMAL O.S.D..D..D. Setting mode: X light-switching x dark-switching Interrupted 0 SENSICK CAALOGUE
6 W 0 echnical data W 0- S 0 R 0 Max.: mm, adjustable ) Min.:...0 mm, adjustable ) Adjustable, potentiometer 0 Light source ), light type LED, infrared light Light spot diameter Approx. mm at 00 mm Angle of dispersion, sender Approx.. Supply voltage V s ) Power consumption...0 V DC...0 V AC VA Switching outputs Relay, SPS, electrically isolated Switching current I A max. ) A/0 V AC; A/0 V DC Light receiver, switching mode Light-/dark-switching by rotary switch Response time 0 ms Max. switching frequency ) /s ime delay With LED display: switching output active Switch position: «O.S.D.» «One shot» «.D.» delay «.D.» delay «Normal» No delay Delay Adjustable, 0... s; potentiom. 0 Connection type erminal chamber VDE protection class ) Circuit protection ) V A, C Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS; optics: PC ) Object with 90 % remission (based on standard white DIN 0) ) Average service life 00,000 h at A = + C ) ± 0 % ) Provide suitable spark suppression for inductive or capacitive loads ) With light/dark ratio : ) Reference voltage 0 V UC ) A = V s connections reverse-polarity C = Interference suppression ) Black = % remission Grey = % remission White = 90 % remission A 9 0 B 0 00 A 0 B 0 A 0 B (mm) Scanning range on black ) /background white Scanning range on grey ) /background white Scanning range on white ) /background white A control set to MIN B control set to MAX % of scanning distance %/90% (mm) %/90% 90%/90% Order information ype Part no. W 0-S W 0-R SENSICK CAALOGUE
7 W 0 Photoelectric proximity switches, energetic, infrared light -- DC mm Photoelectric proximity switches Adjustable sensitivity erminal chamber or M, -pin plug est input Dimensional drawing.,. 0 max Adjustments possible W 0-F 0 W 0-F 0 W 0-E 0 D. L. SENS. Centre of optical axis, receiver Centre of optical axis, sender Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at bottom or rear; or M equipment plug, bottom LED signal strength indicator, yellow, switching output active hrough hole Ø. mm on both sides for M hex nut Sensitivity adjustment Light/dark rotary switch L. = light-switching, D. = dark-switching erminals C V Connection types W 0-F 0 W 0-E 0 W 0-F 0 Accessories page Cable receptacles 9 Mounting brackets* 0 * included with delivery erminals -pin, M L+ L+ M M Q Q E E SENSICK CAALOGUE
8 W 0 echnical data W 0- F 0 F 0 E mm, adjustable ) Operating distance...00 mm, adjustable ) Sensitivity Adjustable, potentimeter 0 Light source ), light type LED, infrared light Light spot diameter Approx. 0 mm at 00 mm Angle of dispersion, sender Approx.. Supply voltage V s V DC ) Ripple ) V SS Current consumption ) ma Switching outputs PNP, open collector: Q NPN, open collector: Q Output current I A max. 00 ma Light receiver, switching mode Light-/dark-switching by rotary switch Response time ).0 ms Max. switching frequency ) 00/s est input E sender off PNP: E to + V S NPN: E to 0 V Connection types erminal chamber Plug M, -pin VDE protection class ) Circuit protection 9) V A, B, C, D Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS; optics: PC ) Object with 90 % remission (based on standard white DIN 0) ) Average service life 00,000 h at A = + C ) Limit values ) Must be within V S tolerances ) Without load ) With resistive load ) With light/dark ratio : ) Reference voltage 0 V DC 9) A = V s connections reverse-polarity B = Inputs/outputs reverse-polarity C = Interference suppression D = Outputs overcurrent and short-circuit (mm) Operating distance, max. typical % Order information ype Part no. W 0-F W 0-F W 0-E Scanning range on black, % remission Scanning range on grey, % remission Scanning range on white, 90 % remission Operating reserve % %, max. typical Operating distance (mm) SENSICK CAALOGUE
9 W 0 Photoelectric proximity switches, energetic, infrared light -- UC mm Photoelectric proximity switches Adjustable sensitivity erminal chamber Universal current supply, relay output, SPD, timer optional, t and t can be connected separately Enclosure rating IP CE noise radiation EN 00- ( Residential standard ) Dimensional drawing.., Adjustments possible W 0-S 0 W 0-R 0 SENS. SENS. 9. DLY. DLY 9 Centre of optical axis, receiver Centre of optical axis, sender Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at bottom or rear LED signal strength indicator, red hrough hole l. mm on both sides for M hex nut Sensitivity adjustment ime control -delay t ime control -delay t erminals C V Connection type W 0-S 0 W 0-R 0 ime delay t = 0. 0 s V S Light received yes no Relay active yes no t t Accessories page Mounting brackets* 0 erminals * included with delivery L N SENSICK CAALOGUE
10 W 0 echnical data W 0- S 0 R 0, max. typical mm, adjustable ) Operating distance mm, adjustable ) Sensitivity Adjustable, potentiometer 0 Light source ), light type LED, infrared light Light spot diameter Approx. 9 mm at 000 mm Angle of dispersion, sender Approx.. Supply voltage V S ) Power consumption...0 VDC...0 V AC VA Switching output Relay, SPD, electrically isolated Switching current I max ) A/0 V AC; A/0 V DC Light receiver, switching mode Light-switching Response time 0 ms Max. switching frequency ) /s ime delays delay t delay t s, can be connected separately s, can be connected separately Connection type erminal chamber CE noise radiation Level EN 00- VDE protection class ) Circuit protection ) ( Residential standard ) V A, C Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS; optics: PC ) Object with 90 % remission (based on standard white DIN 0) ) Average service life 00,000 h at A = + C ) ± 0 % ) Provide suitable spark suppression for inductive or capacitive loads ) With light/dark ratio : ) Reference voltage 0 V UC ) A = V s connections reverse-polarity C = Interference suppression Order information ype Part no. W 0-S 0 00 W 0-R (mm) Operating distance, max. typical Scanning range on black, % remission Scanning range on grey, % remission Scanning range on white, 90 % remission Operating reserve 0 % 90% %, max. typical (mm) Operating distance SENSICK CAALOGUE
11 W 0 Photoelectric proximity switches, energetic, red light -- DC...00 mm Photoelectric proximity switches Adjustable sensitivity erminal chamber or M, -pin plug est input Dimensional drawing... 0 max Adjustments possible W 0-F 0 W 0-F 0 W 0-E 0 D. L. SENS. Centre of optical axis, receiver Centre of optical axis, sender Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at bottom or rear; or M equipment plug, bottom LED signal strength indicator, yellow, switching output active hrough hole Ø. mm on both sides for M hex nut Sensitivity adjustment Light/dark rotary switch L. = light-switching, D. = dark-switching erminals C V Connection types W 0-F 0 W 0-E 0 W 0-F 0 Accessories page Cable receptacles 9 Mounting brackets* 0 * included with delivery erminals -pin, M L+ L+ M M Q Q E E SENSICK CAALOGUE
12 W 0 echnical data W 0- F 0 F 0 E mm, adjustable ) Operating distance mm, adjustable ) Sensitivity Adjustable, potentimeter 0 Light source ), light type LED, infrared light Light spot diameter Approx. mm at 000 mm Angle of dispersion, sender Approx.. Supply voltage V s V DC ) Ripple ) V SS Current consumption ) ma Switching outputs PNP, open collector: Q NPN, open collector: Q Output current I A max. 00 ma Light receiver, switching mode Light-/dark-switching by rotary switch Response time ). ms Max. switching frequency ) /s est input E sender off PNP: E to + V S NPN: E to 0 V Connection types erminal chamber Plug M, -pin VDE protection class ) Circuit protection 9) V A, B, C, D Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS; optics: PC ) Object with 90 % remission (based on standard white DIN 0) ) Average service life 00,000 h at A = + C ) Limit values ) Must be within V S tolerances ) Without load ) With resistive load ) With light/dark ratio : ) Reference voltage 0 V DC 9) A = V s connections reverse-polarity B = Inputs/outputs reverse-polarity C = Interference suppression D = Outputs overcurrent and short-circuit (mm) Operating distance, max. typical % Order information ype Part no. W 0-F W 0-F W 0-E Scanning range on black, % remission Scanning range on grey, % remission Scanning range on white, 90 % remission Operating reserve % %, max. typical Operating distance (mm) SENSICK CAALOGUE
13 W 0 Photoelectric proximity switches, energetic, red light -- UC...00 mm Photoelectric proximity switches Adjustable sensitivity erminal chamber Universal current supply, Relay output, SPD, timer optional, t and t can be connected separately Enclosure rating IP CE noise radiation EN 00- ( Residential standard ) Dimensional drawing Adjustments possible W 0-S 0 W 0-R 0 SENS. SENS. 9. DLY. DLY 9 Centre of optical axis, receiver Centre of optical axis, sender Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at bottom or rear LED signal strength indicator, red hrough hole l. mm on both sides for M hex nut Sensitivity adjustment ime control -delay t ime control -delay t erminals C V Connection type W 0-S 0 W 0-R 0 ime delay t = 0. 0 s V S Light received yes no Relay active yes no t t Accessories page Mounting brackets* 0 erminals * included with delivery L N SENSICK CAALOGUE
14 W 0 echnical data W 0- S 0 R 0, max. typical...00 mm, adjustable ) Operating distance...00 mm, adjustable ) Sensitivity Adjustable, potentiometer 0 Light source ), light type LED, infrared light Light spot diameter Approx. 0 mm at 00 mm Angle of dispersion, sender Approx.. Supply voltage V S ) Power consumption...0 VDC...0 V AC VA Switching output Relay, SPD, electrically isolated Switching current I max ) A/0 V AC; A/0 V DC Light receiver, switching mode Light-switching Response time 0 ms Max. switching frequency ) /s ime delays -delay t -delay t s, can be connected separately s, can be connected separately Connection type erminal chamber CE noise radiation Level EN 00- VDE protection class ) Circuit protection ) ( Residential standard ) V A, C Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS; optics: PC ) Object with 90 % remission (based on standard white DIN 0) ) Average service life 00,000 h at A = + C ) ± 0 % ) Provide suitable spark suppression for inductive or capacitive loads ) With light/dark ratio : ) Reference voltage 0 V UC ) A = V s connections reverse-polarity C = Interference suppression Order information ype W 0-S 0 Part no W 0-R (mm) Operating distance, max. typical Scanning range on black, % remission Scanning range on grey, % remission Scanning range on white, 90 % remission Operating reserve 0 % 90% % Operating distance, max. typical (mm) SENSICK CAALOGUE 9
15 WL 0 Photoelectric reflex switches, red light -- DC Scanning range m Photoelectric reflex switches Polarising filter providing reliable detection even of objects with reflective surfaces Adjustable sensitivity erminal chamber or M, -pin plug est input Dimensional drawing... 0 max Adjustments possible WL 0-F 0 WL 0-F 0 WL 0-E 0 D. L. SENS. Centre of optical axis, receiver Centre of optical axis, sender Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at bottom or rear; or M equipment plug, bottom LED signal strength indicator, yellow, switching output active hrough hole Ø. mm on both sides for M hex nut Sensitivity adjustment Light/dark rotary switch L. = light-switching, D. = dark-switching erminals C V Connection types WL 0-F 0 WL 0-E 0 WL 0-F 0 Accessories page Cable receptacles 9 Mounting brackets* 0 Reflector P 0* 0 * included with delivery erminals -pin, M L+ L+ M M Q Q E E 0 SENSICK CAALOGUE
16 WL 0 echnical data WL 0- F 0 F 0 E0 Scanning range, max. typical/on refl m/ PL 0 A max. typical/on refl m/ P 0 (included) Operating range m/ P 0 Sensitivity Adjustable, potentiometer 0 Light source ), light type LED, visible red light with polarising filter Light spot diameter Approx. 0 mm at m Angle of dispersion, sender Approx.. Supply voltage V s VDC ) Ripple ) V SS Current consumption ) ma Switching outputs PNP, open collector: Q NPN, open collector: Q Output current I A max. 00 ma Light receiver, switching mode Light /dark-switching by rotary switch Response time ). ms Max. switching frequency ) /s est input E sender off PNP: E to + V S NPN: E to 0 V Connection types erminal chamber M plug, -pin VDE protection class ) Circuit protection ) V A, B, C, D Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS; optics: PMMA ) Average service life 00,000 h at A = + C ) Limit values ) Must be within V S tolerances ) Without load ) With resistive load ) With light/dark ratio : ) Reference voltage 0 V DC ) A = V s connections reverse-polarity B = Inputs/outputs reverse-polarity C = Interference suppression D = Outputs overcurrent and shortcircuit Scanning range and operating reserve Order information ype Part no. WL 0-F WL 0-F WL 0-E (m) 0 Operating range Reflector type PL 0 A P 0 PL 0 A or PL 0 A PL 0 A or PL A PL 0 A Reflective tape «Diamond Grade» Scanning range, max. typical Operating range m m m m m m Operating reserve Operating range Scanning range, max. typical (m) 0 SENSICK CAALOGUE
17 WL 0 Photoelectric reflex switches, red light -- UC Scanning range m Photoelectric reflex switches Polarising filter providing reliable detection even of objects with reflective surfaces erminal chamber Universal current supply, relay output, SPD, timer optional, t and t can be connected separately Enclosure rating IP CE noise radiation EN 00- ( Residential standard ) Dimensional drawing., Adjustments possible WL 0-S 0 WL 0-R 0 SENS. 9 SENS.. DLY. DLY 9 Centre of optical axis, receiver Centre of optical axis, sender Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at bottom or rear LED signal strength indicator, red hrough hole l. mm on both sides for M hex nut Sensitivity adjustment ime control -delay t ime control -delay t erminals C V Connection type WL 0-S 0 WL 0-R 0 ime delay t = 0. 0 s V S Light received yes no Relay active yes no t t Accessories page Mounting brackets* 0 Reflector P 0* 0 * included with delivery erminals L N SENSICK CAALOGUE
18 WL 0 echnical data WL 0- S 0 R 0 Scanning range, max. typical/on refl m/ PL 0 A max. typical/ on refl m/p 0 (included) Operating range m/p 0 Sensitivity Adjustable, potentiometer 0 Light source ), light type LED, visible red light with polarising filter Light spot diameter Approx. 00 mm at 0 m Angle of dispersion, sender Approx.. Supply voltage V s ) Power consumption...0 VDC...0 V AC VA Switching output Relay, SPD, electrically isolated Switching current I A max. ) A/0 V AC; A/0 V DC Light receiver, switching mode Light-switching Response time 0 ms Max. switching frequency ) /s ime delays delay t s, can be connected separately delay t s, can be connected separately Connection type erminal chamber CE noise radiation Level EN 00- VDE protection class ) Circuit protection ) ( Residential standard ) V A, C Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS; optics: PMMA ) Average service life 00,000 h at A = + C ) ± 0 % ) Provide suitable spark suppression for inductive or capacitive loads ) With light/dark ratio : ) Reference voltage 0 V UC ) A = V s connections reverse-polarity C = Interference suppression Scanning range and operating reserve Order information ype Part no. WL 0-S 0 00 WL 0-R (m) 0 Operating range Reflector type PL 0 A P 0 PL 0 A or PL 0 A PL 0 A or PL A PL 0 A Reflective tape «Diamond Grade» Scanning range, max. typical Operating range m m m m m m Operating reserve Operating range Scanning range, max. typical (m) 0 SENSICK CAALOGUE
19 WS/WE 0 hrough-beam photoelectric switches, infrared light -- DC Scanning range 0 m hrough-beam photoelectric switches Adjustable sensitivity erminal chamber or M, -pin plug est input Dimensional drawing... max Adjustments possible WS/WE 0-F 0 WS/WE 0-F 0 WS/WE 0-E 0 SENS. MODE Min. Max. L. D. Centre of optical axis, sender/receiver Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at bottom or rear; or M equipment plug, bottom LED signal strength indicator, red hrough hole l. mm on both sides for M hex nut Sensitivity adjustment Light/dark rotary switch L. = light-switching, D. = dark-switching erminals C V Connection types WS/WE 0-F 0 WS/WE 0-F 0 WS/WE 0-E 0 Accessories page Cable receptacles M 9 Mounting brackets* 0 Slotted masks Sender erminals WS 0-G 0 L+ M E -pin, M WS 0-G 0 L+ M NC E * included with delivery Receiver WE 0-E 0 WE 0-F 0 WE 0-F 0 L+ M Q L+ M Q NC SENSICK CAALOGUE
20 WS/WE 0 echnical data WS/WE 0- F 0 F 0 E 0 Scanning range, max. typical 0 m Operating range 0 m Sensitivity Adjustable, potentiometer 0 Light source ), light type LED, infrared light Light spot diameter Approx. 0 mm at 0 m Angle of dispersion, sender Approx. Angle of dispersion, receiver Approx. 0 Supply voltage V S VDC ) Ripple ) V SS Current consumption ) sender 0 ma receiver ma Switching outputs PNP, open collector: Q NPN, open collector: Q Output current I A max. 00 ma Light receiver, switching mode Light-/dark-switching by rotary switch Response time ) ms Max. switching frequency ) 00/s est input E sender off PNP, NPN: E to 0 V Connection types erminal chamber M plug, pin VDE protection class ) Circuit protection ) sender receiver V A, B A, B, C, D Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS; optics: PC ) Average service life h at A = + C ) Limit values ) Must be within V S tolerances ) Without load ) With resistive load ) With light/dark ratio : ) Reference voltage 0 V DC ) A = V s connections reverse-polarity B = Inputs/outputs reverse-polarity C = Interference suppression D = Outputs overcurrent and shortcircuit Scanning range and operating reserve Order information ype WS/WE 0-F 0 WS/WE 0-E 0 WS/WE 0-F 0 Part no (m) 0 0 Operating range Scanning range, max. typical 0 Scanning range reduction when using slotted masks Without slotted mask Slot width mm Slot width mm Slot width mm Operating reserve Operating range Scanning range, max. typical (m) 0 SENSICK CAALOGUE
21 WS/WE 0 hrough-beam photoelectric switches, red light -- UC Scanning range m hrough-beam photoelectric switches Adjustable sensitivity erminal chamber Universal current supply, relay output, SPD, timer optional, t and t can be connected separately Enclosure rating IP CE noise radiation EN 00- ( Residential standard ) Dimensional drawing Adjustments possible WS/WE 0-S 0 WS/WE 0-R 0 SENS. SENS.. DLY. DLY Centre of optical axis, sender and receiver Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at bottom or rear LED signal strength indicator, red hrough hole l. mm on both sides for M hex nut Sensitivity adjustment ime control -delay t ime control -delay t erminals C V Connection type WS/WE 0-S 0 WS/WE 0-R 0 ime delay t = 0. 0 s V S Light received yes no Relay active yes no t t Accessories page Mounting brackets* 0 Sender erminals WS 0-S 0 * included with delivery L N Receiver WE 0-S 0 WE 0-R 0 L N SENSICK CAALOGUE
22 WS/WE 0 echnical data WS/WE 0- S 0 R 0 Scanning range, max. typical m Operating range 0 m Sensitivity Adjustable, potentiometer 0 Light source ), light type LED, visible red light Light spot diameter Approx. 00 mm at 0 m Angle of dispersion, sender Approx. Angle of dispersion, receiver Approx. 0 Supply voltage V ) S Power consumption Sender Receiver...0 VDC...0 V AC VA VA Switching output Relay, SPD, electrically isolated Switching current I A max. ) A/0 V AC; A/0 V DC Light receiver, switching mode Light-switching Response time 0 ms Max. switching frequency ) /s ime delays -delay t -delay t s, can be connected separately s, can be connected separately Connection type erminal chamber CE noise radiation Level EN 00- VDE protection class ) Circuit protection ) ( Residential standard ) V A, C Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS; optics: PC ) Average service life 00,000 h at A = + C ) ± 0 % ) Provide suitable spark suppression for inductive or capacitive loads ) With light/dark ratio : ) Reference voltage 0 V UC ) A = V s connections reverse-polarity C = Interference suppression Scanning range and operating reserve Order information ype WS/WE 0-S 0 WS/WE 0-R 0 Part no (m) Operating range Scanning range, max. typical 0 Operating reserve Operating range Scanning range, max. typical (m) SENSICK CAALOGUE
23 WLL 0 Photoelectric switches for fibre-optic cable, red light -- DC Scanning range max. 00 mm hrough-beam systems Proximity systems max. (0) mm Wide range of fibre-optic cables for through-beam and proximity applications Easy adaption of fibre-optic cable using cap nut Adjustable sensitivity erminal chamber, at bottom or rear or M plug, -pin est input Dimensional drawing 9... max Adjustments possible WLL 0-F 0 WLL 0-F 0 WLL 0-E 0 SENS. MODE Min. Max. L. D. Centre of optical axis, receiver Centre of optical axis, sender Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at bottom or rear; or M equipment plug, bottom LED signal strength indicator, red hrough hole l. mm on both sides for M hex nut Sensitivity adjustment Light/dark rotary switch L. = light-switching, D. = dark-switching erminals C V Connection types WLL 0-E 0 WLL 0-F 0 WLL 0-F 0 Accessories page Cable receptacles 9 Mounting brackets* 0 Fibre-optic cable * included with delivery erminals -pin, M L+ L+ M M Q Q E E SENSICK CAALOGUE
24 WLL 0 echnical data WLL 0- F 0 F 0 E 0 Suitable fibre-optic cables Fibre-optic cable series LIS/LBS see page /ranges Depends on the fibre-optic cable used hrough-beam system, max. typical ) 0... mm mm w. special fibre-optic cable Scanning range ) mm mm w. special fibre-optic cable Proximity system Scanning range, max. typical mm Operating range mm Sensitivity Adjustable, potentiometer 0 Light source ), light type LED, visible red light Light spot diameter Depends on scanning range Aperture fibre-optic cable Approx. Supply voltage V S VDC ) Ripple ) V SS Current consumption ) ma Switching outputs PNP, open collector: Q NPN, open collector: Q Output current I A max. 00 ma Light receiver, switching mode Light-/dark-switching by rotary switch Response time ) 0. ms Max. switching frequency ) 00/s est input E sender off PNP: E to + V S NPN: E to 0 V Connection types erminal chamber Plug M, -pin VDE protection class ) Circuit protection 9) V A, B, C, D Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS ) Object with 90 % remission (based on standard white DIN 0) ) Average service life 00,000 h at A = + C ) Limit values ) Must be within V S tolerances ) Without load ) With resistive load ) With light/dark ratio : ) Reference voltage 0 V DC 9) A = V s connections reverse-polarity B = Inputs/outputs reverse-polarity C = Interference suppression D = Outputs overcurrent and shortcircuit Order information ype WLL 0-F 0 WLL 0-F 0 WLL 0-E 0 Part no SENSICK CAALOGUE 9
25 WLL 0 Photoelectric switches for fibre-optic cable, red light -- UC Proximity systems Scanning range max. 00 mm hrough-beam systems max. (0) mm Wide range of fibre-optic cables for through-beam and proximity applications Easy adaption of fibre-optic cable using cap nut Adjustable sensitivity erminal chamber, at bottom or rear Universal current supply, relay output, SPS, timer optional Dimensional drawing SENS. MODE L. D. 9. SENS. MODE IMER... L. D. 0. (SEC) 9... Adjustments possible WLL 0-S 0 WLL 0-R 0 9 OUPU IMER MODE O.S.D..D..D. NORMAL Centre of optical axis, receiver Centre of optical axis, sender Cable entry gland /HH PF thread for cable diameters from to 0 mm optionally at bottom or rear LED signal strength indicator, red hrough hole l. mm on both sides for M hex nut Sensitivity adjustment Light/dark rotary switch L. = light-switching, D. = dark-switching ime range control erminals Red LED status indicator, switching output active ime delay selector switch O.S.D. = One Shot.D. = delay.d. = delay Normal = No delay C V Accessories page Mounting brackets* 0 Fibre-optic cable * included with delivery Connection type WLL 0-S 0 WLL 0-R 0 erminals V DC V AC ime delay t = 0. s Light beam Mode NORMAL O.S.D..D..D. Switching mode: X light-switching x dark-switching Uninterrupted Interrupted 0 SENSICK CAALOGUE
26 WLL 0 echnical data WLL 0- S 0 R 0 Suitable fibre-optic cable Fibre-optic cable series LIS/LBS see page /ranges Depends on the fibre-optic cable used hrough-beam system, max. typical ) 0... mm mm w. special fibre-optic cable Scanning range ) mm mm w. special fibre-optic cable Proximity system Scanning range, max. typical mm Operating range mm Sensitivity Adjustable, potentiometer 0 Light source ), light type LED, visible red light Light spot diameter Depends on scanning range Aperture fibre-optic cable Approx. Supply voltage V S ) Power consumption...0 V DC...0 V AC VA Switching output Relay, SPS, electrically isolated Switching current I A max. ) A/0 V AC; A/0 V DC Light receiver, switching mode Light-/dark-switching by rotary switch Response time 0 ms Max. switching frequency ) /s ime delays With indicator LED: switching output active Switch position: «O.S.D.» : «One shot» «.D.» delay t «.D.» delay t «Normal» No delay ime range Adjustable, 0... s; potentiometer 0 Connection type erminal chamber VDE protection class ) Circuit protection ) V A, C Enclosure rating IP Ambient temperature A Operation C...+ C Storage 0 C...+0 C Weight Approx. 0 g Material Housing: ABS ) Object with 90 % remission (based on standard white DIN 0) ) Average service life 00,000 h at A = + C ) ± 0 % ) Provide suitable spark suppression for inductive or capacitive loads ) With light/dark ratio : ) Reference voltage 0 V DC ) A = V s connections reverse-polarity C = Interference suppression Order information ype WLL 0-S 0 WLL 0-R 0 Part no SENSICK CAALOGUE
W 27-2: The photoelectric switch series with expanded possibilities
W - Photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W -: The photoelectric switch series with expanded possibilities metres
More informationW 36: Mastering complex tasks reliably
Lichtschranken W Photoelectric Baureihe switches WL - Photoelectric proximity switches, BGS Photoelectric reflex switches W : astering complex tasks reliably Through-beam photoelectric switches for temperatures
More informationW150: Miniature photoelectric switch series with completely integrated electronics
Product group W50 Photoelectric proximity switch BGS Photoelectric proximity switch energ. Photoelectric reflex switch W50: iniature photoelectric switch series with completely integrated electronics Through-beam
More informationintelligent solutions
Lichtschranken W 8- Photoelectric Baureihe switches WL - Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W 8-: Integrated stateof-the-art technology
More informationW 160: Miniature series for optimum solutions
W 0 Photoelectric switches Photoelectric proximity switches, BGB Photoelectric proximity switches, energetic W 0: iniature series for optimum solutions Photoelectric reflex switches Through-beam photoelectric
More informationPhotoelectric switches WLL 170(T), fibre-optic cables LL 3: flexible solutions with fibre-optic cable systems
WLL 0(T) Photoelectric switches Photoelectric switches with fibre-optic cable Proximity mode Photoelectric switches with fibre-optic cable Through-beam mode Photoelectric switches WLL 0(T), fibre-optic
More informationW 2: Subminiature photoelectric switch series: extremely small and extremely strong
Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches Through-beam photoelectric switches W : Subminiature photoelectric switch series:
More informationLUT Luminescence scanners: Seeing what no-one else can
LUT Luminescence scanners Luminescence scanners LUT Luminescence scanners: Seeing what no-one else can Special features: A semi-conductor light source is used in the LUT series no lamp change required.
More informationW 18-3: Incorporated application Know-how, expanded functionality, high level of equipment availability
Photoelectric proximity switches, FGS Photoelectric reflex switches Through-beam photoelectric switches W -: Incorporated application Know-how, expanded functionality, high level of equipment availability
More informationW160T: With the smallest LED light spot
W0T: With the smallest LED light spot BGS Photoelectric proximity switches Photoelectric proximity switches mark sensor Photoelectric proximity switches energetic Photoelectric reflex switches SSystem
More informationV180-2 M18 Cylindrical Photoelectric Sensor Series
D ata S h e e t V80-8 Cylindrical Photoelectric Sensor Series A rounded concept, not only economically. Cylindrical photoelectric switches offer the benefits of very fast commissioning and compact design.
More informationsensors Miniature Sensors - S100 The universal miniature photoelectric sensor
Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More informationUniversal Voltage Terminal Photoelectric E3JM
Universal Voltage Terminal Photoelectric Universal AC/DC Photoelectric Sensor with Built-in Timer Easy-to-wire terminal block Built-in timer offers selectable ON-delay, OFF-delay and one-shot Relay or
More informationSENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
More informationPhotoelectric sensors W100, Photoelectric proximity sensor, energetic
ONLINE DATA SHEET www.mysick.com Photoelectric sensors W100, Photoelectric proximity sensor, energetic WT100-P4439 Photoelectric sensors W100, Photoelectric proximity sensor, energetic Model Name > WT100-P4439
More informationLaser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049
More informationONLINE DATA SHEET WT34-R220 W34 PRODUCT PORTFOLIO
ONLINE DATA SHEET WT34-R220 W34 A B C D E F WT34-R220 W34 Illustration may differ Ordering information Type Part no. WT34-R220 1019233 Other models and accessories www.sick.de/w34 H I J K L M N O P Q R
More informationPhotoelectric sensors V180-2, Photoelectric retro-reflective sensor, Standard optics
ONLINE DATA SHEET www.mysick.com Photoelectric sensors V180-2, Photoelectric retro-reflective sensor, Standard optics VL180-2P42436 Photoelectric sensors V180-2, Photoelectric retro-reflective sensor,
More informationphotoelectric highlights www.automation.datalogic.com
photoelectric miniature sensors S8 series The new S8 series of compact sensors offers excellent detection performances, usually associated with sensors that have larger dimensions and a higher price. The
More informationThroughbeam photoelectric sensors. Dimensioned drawing. Electrical connection
Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!
More informationCross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationPower Supply and Indicator Unit Type 5024-1. Fig. 1 Type 5024-1. Mounting and Operating Instructions EB 9539 EN
Power Supply and Indicator Unit Type 5024-1 Fig. 1 Type 5024-1 Mounting and Operating Instructions EB 9539 EN Edition October 2003 Application 1 Application The Type 5024-1 Power Supply and Indicator Unit
More informationSensing method Appearance a Connection o method Sensing distance Model NPN output PNP output Through-beam Pre-wired (see note 3) Connector.
Photoelectric Sensor with Built-in Amplifier Photoelectric Sensor with built-in amplifier is applicable to a wide variety of lines and ensures a longer sensing distance than any other model. User-friendly
More informationColor Mark Sensor with Red or Green LED E3S-VS
Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical
More informationSpeed Control Relays SX2
SX2 File 850 CONENS Description.....................................................Page General Information................................................ 2-3 SX2DV General Information...........................................
More informationOPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS
OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS Photoelectric These sensors use light sensitive elements to detect objects and are made up of an emitter (light source) and a receiver. Four types of photoelectric
More informationInductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
More informationClear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles
Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.
More informationLong sensing range. Most suitable for conveyor lines and parking lot applications. 10 m 32.808 ft (Red LED)
NX SERIES Compact Multi-voltage Photoelectric Power Supply Built-in Multi-voltage photoelectric sensor usable worldwide Conforming to ow Voltage and EMC Directive Multi-voltage The NX series can operate
More informationDimensional drawing. Connection type IME08-1B5NOZT0S IME08-1B5NSZT0S IME08-1B5POZT0S IME08-1B5PSZT0S. 3 x 0.14 mm². brn. L+ Schließer/ Öffner M.
Inductive sensor, IE series, IE08, DC-wire, Standard series, Flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationSENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications
Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:
More informationE3Z. Ordering Information. Photoelectric Sensor with Built-in Amplifier. Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity
Photoelectric Sensor with Built-in Amplifier Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity H Photo-IC provides long sensing distance: 15 m for through-beam, 4 m for retroreflective,
More informationBOS 73K... BOS 74K...
BFB/BOS When there s no space for a photoelectric sensor, there is only one solution: user fiber optics! If there are no particular demands for toughness an ambient temperature or chemical resistance,
More informationThru-Beam 80 to 320 mm 0.05 to 0.08 mm
Series 7069A Fiber Optics The 7069A coupled with the appropriate cable forms a fiber optic sensor controller system capable of detecting objects as small as 0.01mm dia. and color marks on backgrounds of
More informationTechnical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
More informationtechnical data (according to IEC 60947-5-2)
Photoelectric sensors: Series 3#30 & 3#31 ü Complete miniature sensor series mm in rugged Crastin housings ü Shock & vibration resistant due to fully vacuum-potted electronics ü Diffuse sensors with precise
More informationOperating instructions Diffuse reflection sensor with background suppression O1D101 O1D104 706114 / 00 01 / 2012
Operating instructions Diffuse reflection sensor with background suppression O1D101 O1D104 706114 / 00 01 / 2012 Contents 1 Preliminary note 3 1.1 Symbols used 3 1.2 Warning signs used 3 2 Safety instructions
More informationFor accurate positioning in warehouse and conveying areas
TECHNICAL DESCRIPTION DMP Position finder For accurate positioning in warehouse and conveying areas AUDIN - 8, avenue de la malle - 170 Saint Brice Courcelles - Tel : 0..0.0.1 - Fax : 0..0.8.0 - Web :
More informationTubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc
Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular
More informationPreset Counter signo 721
Most simple handling Impressive, clearly readable display in 48x48 mm Input frequency up to 60 khz Easy installation due to pluggable terminals TECHNICAL DATA GENERAL Display Height of digits Supply voltage
More informationCapacitive Prox E2K-X
Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
More informationSpecifications H8CA-S H8CA-S RATINGS. Approved by the following standards CHARACTERISTICS
Solid-State Counter/Timer 1/16 DIN, Easy-to-Operate Combination Counter and Timer Operation selectable as preset counter or timer 6-digit LCD Present Value: 8 mm (.32 in) Set Value: 4 mm (.16 in) Nonsignificant
More informationACS-30-EU-EMDR-10-MOD
Multi-application heat tracing Control and Monitoring in commercial and residential buildings Roof & Gutter de-icing sensor module Technical Information Approvals Module IP rating Ambient operating temperature
More informationLED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6
L-LAS Series L-LAS-LT-165-CL - Line laser 1 mw, laser class 2 - Visible laser line (red light 670 nm), typ. 2 mm x 3 mm - Reference distance approx. 165 mm - Measuring range typ. 65... 265 mm - Resolution
More informationL-LAS-TB-CL serie. laser light curtains for inline measuring tasks
L-LAS-TB-CL serie laser light curtains for inline measuring tasks Maximum distance 2.000 mm Measurement range 6 up to 98 mm Resolution up to 4 µm up to 1,5 khz scan rate 0-10 V or 4-20 ma analogue output
More informationfiber-optic sensors WLL180T, Fiber-optic photoelectric sensor
ONLINE DATA SHEET www.mysick.com fiber-optic sensors WLL180T, Fiber-optic photoelectric sensor WLL180T-P434 fiber-optic sensors WLL180T, Fiber-optic photoelectric sensor Model Name > WLL180T-P434 Part
More informationHow To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
More informationDRTS 33. The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters
The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual
More informationControl Devices Catalogue. Control Devices. Preferred and Standard Products
Control Devices Catalogue Control Devices Preferred and Standard Products KOP.J Timer Electronic 22.5 mm Characteristics Mounting KOP.J 22.5 mm mono or multifunction high immunity to interference surface
More informationAdjustment functions for both span and shift have been incorporated
SENSORS FOR SERIES LED Type Wafer Alignment Sensor FX-0-F FT-F9 FD-F7 EX-F70/F60 M SH-7 FD-L4 M-DW The use of a safe LED light beam now allows for high precision detection with a resolution of 0!m (.8
More informationSturdy aluminium housing, anodized in blue Female connector for optical fiber (please order optical fiber separately) Mounting holes
SI-COLO Series SI-COLO2-LWL-HAMP-COL4 - Big measuring range: typ. 25 mm... 40 mm (with optical fiber and attachment optics KL-14 or KL-17) - Large assortment of optical fibers available (reflected or transmitted
More informationElectrical connection
(I)GSU 14B Ultrasonic Label Fork Dimensioned drawing Part No. 501 09234 4mm 12-30 V DC 4 m/s Ultrasonic forked sensor for universal application Large mouth width, hence also suitable for booklets or fan-fold
More informationFiber-Optic Photoelectric Sensor
Fiber-Optic Photoelectric Sensor High Performance Amplifier Has Fast Response Time, Longer Sensing Distance and Self-Diagnostic Functions Ultra fast 20 µsec. response time (-F) Extended sensing distance
More informationYour Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
More informationMiniature High-Resolution Registration Mark Sensor White LED AUTOSET Remote Setup Option
REGISTRATION MARK SENSORS MARK EYE PRO 2 Miniature High-Resolution Registration Mark Sensor White LED AUTOSET Remote Setup Option Registration Mark Photoelectric Sensors 2-115 High-Resolution Registration
More information40.3. Control Relays and Timers
.3 Contents EASY500/700/800 Intelligent Relays........ EASY/MFD Expansion Modules............ MFD Intelligent Relays................... EASY/MFD Communication Modules....... EASY/MFD Power Supplies, Accessories
More informationInductive Proximity Sensors
M12 Inductive Proximity Sensors Standard Length Mini's Extended Sensing 3 Wire DC 2 Wire DC 2 Wire AC (Wiring Schematic) 3 Wire DC PNP Normally Open (1) IMM32122C IMM35124C IMN32122C IMN35124C IMN32122M12
More informationDigital display DA 48
Loop powered plug-in LCD display No auxiliary energy source needed Scale freely adjustable on site Can be turned to any position Suitable for any 0 ma transmitter with EN 175301-803A connector Digital
More informationis then retained absolutely without interruption.
Page 1 of 11 DC UPS uninterruptible power supplies - DC UPS module 15 A Compact design, only 50 mm wide Absolutely interruption-free buffering of power failures through immediate electronic connection
More informationIntroduction to Fiber Optic Cables. Photoelectric Sensors. 2Photoelectric Sensors, Standard Sensors, Fiber optic cables. Please Note!
Photoelectric, Standard, optic cables Photoelectric Introduction to Optic s Optic Diffuse and Thru-Beam Mode In applications involving small targets or unfavorable conditions, fiber optic cables may be
More informationPNOZsigma - Base units
PNOZsigma - Base units Register Login Sensors Control and Communication Electronic monitoring relays Safety Relays PNOZ X PNOZsigma PNOZelog PNOZmulti PNOZpower Configurable control systems Programmable
More informationLiquid Level Limit Switch liquiphant T FTL 20
Technical Information TI 64F/4/ae Liquid Level Limit Switch liquiphant T FTL 0 Level limit switch for liquids Applications The Liquiphant T FTL 0 is a level limit switch for virtually any kind of fluid
More informationSSC-T800series. New type with radial cross ray method. Light Curtain Sensors. Type. Radial Cross Ray Method. Detecting width. Light axis interval
series Light Curtain Sensors New type with radial cross ray method Small objects and flat tape-like objects detected Convenient simplified wiring requiring no clock (synchronization) line Compact and flat
More informationLaserlyte-Flex Alignment System
Laserlyte-Flex Alignment System LaserLyte-Flex The LaserLyte-Flex Alignment System is a unique, interchangeable, low cost plug and play laser system. Designed specifically for aligning and positioning
More information(68.52) X. June 2000 Supercedes February 2000. xenex CONVENTIONAL FIRE DETECTION & ALARM SYSTEM. we look @ business differently
(68.52) X June 2000 Supercedes February 2000 xenex CONVENTIONAL FIRE DETECTION & ALARM SYSTEM.... we look @ business differently XENEX SYSTEM ARCHITECTURE Note: This schematic is for guidance only please
More informationElectronic Pressure Switch EDS 300
Electronic Pressure Switch EDS 300 User manual Page 2 of 16 Content 1. Functions of the EDS 300...3 2. Mounting...3 3. Operating keys on the membrane keypad...4 4. Digital display...4 5. Output function...5
More informationNew XUY roller sensors
Do you want to simplify the sensor integration in your conveyor systems? New XUY roller sensors for packet, boxes, letters on roller conveyors. Telemecanique Sensor s OsiSense TM XUY photoelectric sensors
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationContactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
More informationD ATA S H E E T. DT50 Laser class 1. Laser distance sensor
D ATA S H E E T DT50 Laser class 1 Laser distance sensor DT50 Distance sensor Laser class 1 State-of-the-art time of flight technology for fast and accurate measurement results (range up to 10 m) Quick
More informationType: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description
Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
More informationNIVOCONT CONDUCTIVE LEVEL SWITCHES LEVEL SWITCHES
NIVOCONT CONDUCTIVE LEVEL SWITCHES O U R P R O F E S S I O N I S Y O U R L E V E L LEVEL SWITCHES APPLICATION Level switches, based on the conductivity principle, can be applied to liquids with conductivity
More informationGivare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
More informationTechnical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationABB i-bus KNX Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG 110 084 R0011
, 2CDG 110 084 R0011 2CDC 071 112 F0008 The Fan Coil Actuator is a modular installation device (MDRC) in pro M design. It is intended for installation in the distribution board on 35 mm mounting rails.
More informationE3T Miniature Photoelectric Sensors
E3T Miniature Photoelectric Sensors Ultra-Compact with Visible Red Beam»» Ultra slim to fit and perform where others won't»» Visible red beam for simple set-up»» Five different sensing methods E3T Miniature
More informationControl- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
More informationMultifunction Digital Timer
Multifunction Digital Timer 1/16 DIN Timer with Easy-to-use Functions Nine output modes accommodate a wide variety of applications. All parameters set by scroll-through menus accessed from the front panel.
More informationProcess modules Digital input PMI for 24 V DC inputs for 120 V AC inputs
E031026 000823 Process modules Digital input PMI for inputs for 120 V AC inputs PMI Input E4, E5, GND L- PMI 120 V AC Input E4, E5, Common C E6, E7, GND L- E6, E7, Common C LEDs for the inputs operation
More informationAutomation System TROVIS 6400 TROVIS 6493 Compact Controller
Automation System TROVIS 6400 TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and process plants for general
More informationFerrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
More informationE-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Gertemerkmale Positive-guided relay outputs: 3 safety contacts (N/O),
More informationProduct and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.
Product and Applications Description The power supply units N 125/x2 can supply DC 24 V power from an additional pair of terminals (yellowwhite). This DC 24 V output voltage can be used to power e.g. an
More informationE-STOP relays, safety gate monitors
Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Gertemerkmale Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous
More informationOptocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
More informationPluggable interface relays CR-P Pcb relays
2CDC 293 034 F0004 1 2 4 3 Features 9 different supply s: DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2 c/o (8 A) Cadmium-free contact
More informationPage 162. Page 154. Page 158 Page 146. Page 157. Page 152. Page 160. Page 149. Page 159. Page 156. Page 150
Page 162 NEW Page 154 Page 158 Page 146 Page 157 Page 152 Page 160 Page 159 Page 149 Page 156 Page 150 Summary Audible Signal Devices Page 151 Page 163 Page 148 installation version Free-standing Electronic
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationFIRERAY 2000 Installation Guide
FIRERAY 2000 Installation Guide Features Range 33ft to 330 ft. 24Vdc operation Selectable alarm thresholds Low current consumption Ground level electronics Manual or Automatic reset System Description
More informationmecotron Safety relay ESTOP-2 For emergency stop monitoring
E0006 000824 Safety relay E-2 For emergency stop monitoring Description The safety module E-2 for emergency stop monitoring is used for safety breaking one or more circuits and is designed to be incorporated
More informationOperating Instructions. UL325 Compliant Non-monitored
IRB-325 Infrared Photocell UL325 Compliant Non-monitored Operating Instructions This product is an accessory or part of a system. Always read and follow the manufacturer s instructions for the equipment
More informationProximity Sensors Inductive Thermoplastic Polyester Housing Types EI, DC, M 12, M 18, M 30
Proximity Sensors Inductive Thermoplastic Polyester Housing Types EI, DC, M 12, M 18, M 30 Euronorm thermoplastic polyester housing, cylindrical Diameter: M 12, M 18, M 30. Sensing distance: 2 to 15 mm
More informationRM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
More informationMultifunction devices
devices devices devices, electronic Type Page LED multifunction displays pulse, frequency, time (DC) Codix 524 240 pulse, frequency, time (AC+DC) Codix 544 243 LCD multifunction preset counters 1 or 2
More informationAnalogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001
Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.
More informationVario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
More informationThe new generation: WLL180T photoelectric sensor with fiber-optic cable. Around the corner at High Speed
P r o d u C t i n f o r m at i o n The new generation: WLL180T photoelectric sensor with fiber-optic cable Around the corner at High Speed WLL180T: World-class performance and scanning range SICK has been
More informationCONFIGURABLE SAFETY RELAYS
MSI-s/R, MSI-sx/Rx Configurable MSI provide important functions for the efficient flow of automated production processes Special features Combined guarding types by connecting up to 4 AOPDs Additional
More information