SECTION D LINEAR FLUORESCENT LAMPHOLDERS LINEAR FLUORESCENT LAMPHOLDERS
|
|
- Allen Wells
- 7 years ago
- Views:
Transcription
1 1850 Wilson Avenue, Toronto, Ontario, anada, M9M 1A1 Ph: Fax: SETION D LINEAR FLUORESENT LAMPHOLDERS D1 LINEAR FLUORESENT LAMPHOLDERS Linear Lamp Shadesand Bases T5 (G5) Miniature Bi Pin T8/T10/T12 (G13) Medium Bi Pin ircline (G10Q/2GX13) and Accessories T2 (W4, 3X8, 5d) Starter Bases and Starters Lampholder Accessories for T8/T10/T12 Tube Protectors D2 D3-D6 D7-D16 D17-D19 D19 D20-D21 D22 D23 Etlin-Daniels reserves the right to discontinue, modify designs and change specifications without incurring obligation. While every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error herein. opyright 12/2001 Etlin-Daniels
2 Linear FLUORESENT LAMP SHAPES & LAMP BASES D2 FLUORESENT LAMP SHAPES FLUORESENT LAMP BASES T-5 T-5 Miniature Bipin T-6 Single Pin Slimline T-8 Medium Bipin T-5 Miniature Bipin (G5) T-8, T-10, T-12 Medium Bipin (G13) T-8 Single Pin Slimline T-10 Medium Bipin T-12 Medium Bipin T-12 Single Pin Slimline T-10, T-12 Recessed Double ontact (R17d) T-12 Recessed Double ontact T-8/T-12 Medium Bipin U-Bent T-6, T-8, T-12 Slimline Single Pin (FA8) 4-Pin ircline (G10Q) T-9/T-10 4-Pin ircline 2D 4-Pin (2G13) FOR MORE INFORMATION ALL (anada) (A)
3 FLUORESENT SOKET MINIATURE BI-PIN T-5 LAMPHOLDERS T-5 FL265 T-5 /Screw Mount D3 T " ± (9.7 ± 0.2) White polycarbonate body, rated 110 Double edge contacts hold lamp securely Ideal for mirror cases and display lighting 13.5 [0.531] 17.6 [0.691] 0.3 [0.012] Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5 ¼16" 2.5 [0.098] 9.5 [0.374] 26.0 [1.024] 16.5 [0.650] 3.5 [0.138] 5.0 [0.197] 0.776" ± (19.7 ± 0.2) Screw Mount Snap In Mount 0.140" (3.5) PANEL UTOUT Screw mount or snap-in mount into a 0.020" 0.040" (0.5 mm 1 mm) Rated 75W, 600V SA ertified/ UL Listed T-5 FL277 T-5 /Screw Mount T " ± (9.7 ± 0.2) 0.776" ± (19.7 ± 0.2) PANEL UTOUT Snap In Mount 0.140" (3.5) Screw Mount White polycarbonate body, rated 110 Double edge contacts hold lamp securely Ideal for mirror cases and display lighting Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5 ¼16" Screw mount or snap-in mount into a 0.024" 0.047" (0.6 mm 1.2 mm) Rated 75W, 600V SA ertified/ UL Listed FL261 T-5 Mount T [0.413] 9.0 [0.354] 19.0 [0.748] R3.0 [R0.118] 21.4 [0.843] 2.81 [0.110] 0.125" DIA (3.2) 0.708" (18.0) 11.7 [0.461] 10.3 [0.406] Suggested Mounting White polycarbonate body, rated 110 Double edge contacts hold lamp securely Ideal for mirror cases and display lighting Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5 ¼16" Snap-in mount Rated 75W, 600V SA ertified/ UL Listed FOR MORE INFORMATION ALL (anada) (A)
4 T-5 FLUORESENT SOKET MINIATURE BI-PIN T-5 LAMPHOLDERS D4 FL261-A T-5 Screw Mount T [0.413] 19.0 [0.748] R3.0 [R0.118] 9.1 [0.358] T-5 White polycarbonate body, rated 110 Double edge contacts hold lamp securely Ideal for mirror cases and display lighting Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5 ¼16" 27.6 [1.087] 21.4 [0.843] 38.5 [1.516] 20.8 [0.819] 25.5 [1.004] Screw mount into a 0.150" hole Rated 75W, 600V SA ertified/ UL Listed FOR MORE INFORMATION ALL (anada) (A)
5 FLUORESENT SOKET T-5 LINEAR TUBE LAMPHOLDERS T-5 FL641 T-5 Rotary Lock, Rear Mount D5 T [0.36] Made from polycarbonate, rated 110 Locking rotor design for maximum lamp retention Twin wireways for easy harness wiring, wires from bottom of lampholder [0.75] 13.0 [0.51] 9.00 [0.35] Quick connect push-in wire terminals for 18 AWG solid wire, stripped 5 ¼16" Horizontal mounting pins snap in to panel for fast and easy installation [0.93] [0.48] 0.146" DIA (3.7) 0.933" (23.7) PANEL UTOUT For 0.023" 0.040" (0.6 mm to 1.0 mm) Rated 75W, 600V; suitable for HO lamps SA ertified/ UL Listed T-5 FL641-SP T-5 Rotary Lock, Rear Mount With Spring Plate T [1.07] 9.20 [0.36] [0.75] [0.57] [0.93] [0.54] 0.933" (23.7) PANEL UTOUT 0.146" DIA (3.7) 9.00 [0.35] Made from polycarbonate, rated 110 Locking rotor design for maximum lamp retention Spring plate allows for 0.80" (2 mm) lamp length tolerance Quick connect push-in wire terminals for 18 AWG solid wire, stripped 5 ¼16" Twin wireways for easy harness wiring, wires from bottom of lampholder Horizontal mounting pins For 0.023" 0.040" (0.6 mm to 1.0 mm) Rated 75W, 600V; suitable for HO lamps SA ertified/ UL Listed FL621 T-5 Rotary Lock, Screw Mount T [0.362] 0.393" (10.0) 25.2 [0.992] 2.5 [0.098] 37.6 [1.480] 16.0 [0.630] 0.787" (20.0) 0.118" (3.0) Screw Mount 9.5 [0.374] Snap In Mount PANEL UTOUT 16.0 [0.630] Made from polycarbonate, rated 110 Locking rotor design for maximum lamp retention Snap-in mount or screw mount to panel Quick connect push-in wire terminals for 18 AWG solid wire, stripped 5 ¼16" Twin wireways for easy harness wiring, wires from bottom of lampholder Snap-in mounts into a 0.023" 0.040" (0.6 mm to 1.0 mm) Rated 75W, 600V; suitable for HO lamps SA ertified/ UL Listed FOR MORE INFORMATION ALL (anada) (A)
6 T-5 FLUORESENT SOKET MINIATURE BI-PIN T-5 LAMPHOLDERS D6 FL020 Series.150" (3.8) T-5 Panel utout T [1.065] 15.9 [0.626] 33.7 [1.327] ø 3.8 [0.150] #6-32 Tap on FL-020-T 9.2 [0.362] FL021 FL020 & FL020-T 13.5 [0.531] FL [0.626] 20.2 [0.795] ø 3.8 [0.150] #6-32 Tap on FL-021-T 5.4 [0.213] FL021 & FL021-T 14.9 [0.587] 18.3 [0.720] 23.1 [0.909] 18.3 [0.720] 16.3 [0.642] 15.9 [0.626] 23.0 [0.906] ø 3.8 [0.150] #6-32 Tap on FL-022-T 8.0 [0.315] FL022 & FL022-T 13.8 [0.543] 15.9 [0.626] 20.5 [0.807] ø 3.8 [0.150] #6-32 Tap on FL-023-T 3.6 [0.142] FL023 & FL023-T 17.5 [0.689] 24.1 [0.950] 13.1 [0.516] 19.0 [0.748] 18.8 [0.740] 18.8 [0.740] 9.2 [0.362] 13.5 [0.531] 3.3 [0.130] 9.2 [0.362] 20.5 [0.807] FL [0.846] 14.5 [0.571] 3.6 [0.142] ø 3.8 [0.150] #6-32 Tap on FL-025-T 20.5 [0.807] FL025 & FL025-T ø 2.5 [0.098] 17.5 [0.689] 13.4 [0.528] 18.8 [0.740] 8.5 [0.335] 9.2 [0.362] 18.8 [0.740] 9.3 [0.366] 9.2 [0.362] 34.6 [1.362] 27.6 [1.087] ø 3.8 [0.150] #6-32 Tap on FL-026-T 20.5 [0.807] 18.3 [0.720] 23.0 [0.906] FL026 & FL026-T 28.8 [1.134] 21.8 [0.858] ø 3.8 [0.150] #6-32 Tap on FL-027-T 20.5 [0.807] 19.1 [0.752] 24.2 [0.953] FL027 & FL027-T White polycarbonate body, rated 110 Double edge contacts hold lamp securely Ideal for mirror cases and display lighting Two wire ports per terminal for easy harness wiring Models FL020, FL020-T; FL022, FL022-T; and FL023, FL023-T have 9" 18 AWG TEWN solid wires attached, stripped 1 ¼2" Models FL021, FL021-T; FL024, FL024-T; FL025, FL025-T; FL026, FL026-T; and FL027, FL027-T have Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5 ¼16" Various brackets and mounting holes are available (see drawings) T in part number stands for tapped bracket Rated 75W, 600V SA ertified/ UL Listed FOR MORE INFORMATION ALL (anada) (A)
7 FLUORESENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8/T-12 LAMPS T-8/T-12 FL030- Low Profile, Self Aligning For U-Shaped Lamps T-8 D7 White polycarbonate body, rated 110 For T8 lamps Straight-in lamp insertion Slot mount with captive screw and nut 1.1 [0.043] 15.9 [0.625] 29.4 [1.157] [1.000] 18 AWG solid wire 5 ¼16" Two wire ports per terminal for easy harness wiring; wires from bottom of lampholder 8.7 [0.344] 4.0 [0.157] 34.1 [1.344] 7.9 [0.313] 18.3 [0.719] 1.01" (25.65).38" (9.65).187" (4.75).312" (7.93) PANEL UTOUT Rated 660W, 600V, suitable for HO lamps SA ertified/ UL Listed T-8/T-12 FL40 T-8/T-12 Tall /Slot Mount White polycarbonate body, rated 110 Locking rotor design for maximum lamp retention Snap-in or slot mounting with front shelf for added stability For a 0.023" " (0.6 mm mm) 18 AWG solid wire 5 ¼16" Two wire ports per terminal for easy harness wiring; wires from bottom of lampholder Rated 660W, 600V, suitable for HO lamps SA ertified/ UL Listed FL226 Tall Profile With Lead or Screw Mount 1.0 (25.4) (8.7) 1.19 (30.2) 1.78 (45.2) 1.75 (44.5) (60.3) 1.005" (25.5).339" (8.6).160" (4.1) (15.9).525" (13.3) PANEL UTOUT 1.45 (36.9) (0.03) AN BE SNAP-IN HOLE OR SLOTTED NOTH Made from high heat White thermoplastic; also available in Black Phosphor bronze contacts With screw terminals on bottom and wireways for straight mounting on panel Insulating cover for screw terminals provided an be mounted above or below panel an be ordered with captive nut, add Suffix to the part number Rated 660W, 600V UL Listed & SA Approved FOR MORE INFORMATION ALL (anada) (A)
8 T-8/T-12 FLUORESENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8/T-12 LAMPS D8 FL005 Series Low Profile Turn Type T-8/T-12 White polycarbonate body, rated 110 Turn lock type, low profile 18 AWG solid wire 5 ¼16" For a 0.023" " (0.6 mm mm) Two wire ports per terminal for easy harness wiring FL005 Available shunted for use with rapid or program start electronic ballasts; saves time and makes wiring easier Rated 660W, 600V, suitable for all new HO lamps Many models to choose from SA ertified/ UL Listed FL005-S 1.01" (25.65) PANEL UTOUTS.38" (9.65) Standard 1.01" (25.65).38" (9.65) Push-In FL005-WS Standard Profile 1.1 [0.043] 1.1 [0.043] 22.2 [0.874] 9.5 [0.374] 9.5 [0.374] 42.0 [1.654] FL [0.874] [1.000] 9.50 [0.374] 8.70 [0.343] [1.654] FL005-W 18.0 [0.709] [1.248] [0.709] Shunted 1.1 [0.043] 22.2 [0.874] 9.5 [0.374] 9.5 [0.374] 42.0 [1.654] FL005-S, Shunted [0.874] [1.000] 9.50 [0.374] 8.70 [0.343] [1.654] FL005-WS 18.0 [0.709] [1.248] [0.709] aptive Nut * 1.1 [0.043] 22.2 [0.874] 9.5 [0.374] 4.0 [0.157] 9.5 [0.374] 42.0 [1.654] FL005-, aptive Nut * [0.874] [1.000] 9.50 [0.374] 8.70 [0.343] [1.654] FL005-W 18.0 [0.709] [1.248] [0.709] aptive Nut * 1.1 [0.043] 22.2 [0.874] 9.5 [0.374] 9.5 [0.374] 42.0 [1.654] 18.0 [0.709] FL005-S, aptive Nut * [0.874] [1.248] [1.000] 9.50 [0.374] 8.70 [0.343] [1.654] [0.709] FL005-WS *Screws are packed separately. Also available assembled, add Suffix A after in part number. ontinued on next page FOR MORE INFORMATION ALL (anada) (A)
9 FLUORESENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8/T-12 LAMPS T-8/T-12 FL005 Series Low Profile Turn Type D9 Wing, With Locating Nib 1.10 [0.043] 5.50 [0.217] [0.874] FL006 Series [0.484] [1.000] 9.50 [0.374] 8.70 [0.343] [1.280] [1.654] [0.709] FL005-WN 22.2 [0.874] Wing, With Locating Nib, Externally Shunted [0.374] 32.5 [1.280] 18.0 [0.709] FL005-WEN T-8/T-12 FL006 FL006-A FL006/FSB009 White polycarbonate body, rated 110 Turn lock type, low profile 18 AWG solid wire 5 ¼16" For a 0.023" " (0.6 mm mm) Two wire ports per terminal for easy harness wiring Available shunted for use with rapid or program start electronic ballasts; saves time and makes wiring easier Rated 660W, 600V, suitable for all new HO lamps Many models to choose from SA ertified/ UL Listed 1.01" (25.65) PANEL UTOUTS.38" (9.65) Standard 1.01" (25.65).38" (9.65) Push-In Standard Profile, Nut Slot, Slot Mount 1.3 [0.051] 29.8 [1.173] 30.2 [1.189] 8.0 [0.315] 53.0 [2.087] FL006 Flush Sides Standard Profile 30.2 [1.189] 5.0 [0.197] 53.0 [2.087] FL006-A 31.7 [1.248] 18.2 [0.717] 3.7 [0.146] 18.2 [0.717] Standard Profile With Starter Base Holder 1.3 [0.051] 29.8 [1.173] 18.7 [0.734] 30.2 [1.189] 26.7 [1.051] 8.0 [0.315] 53.0 [2.087] 31.7 [1.248] FL006/ FSB009 Standard Profile With Starter Base Holder 1.3 [0.051] 29.8 [1.173] 18.7 [0.734] 30.2 [1.189] 26.7 [1.051] 8.0 [0.315] 53.0 [2.087] 31.7 [1.248] FL006/ FSB010 FOR MORE INFORMATION ALL (anada) (A)
10 T-8/T-12 FLUORESENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8/T-12 LAMPS D10 FL007 Series Butt-On T-8/T-12 FL007 White polycarbonate body, rated 110 Turn lock type Available with centre hole for butt-on mounting, side slots, mounting grooves or mounting brackets 18 AWG solid wire 5 ¼16"; wires from bottom Many models to choose from Available shunted for use with rapid or program start electronic ballasts; saves time and makes wiring easier Two wire ports per terminal for easy harness wiring Rated 660W, 600V, suitable for all new HO lamps SA ertified/ UL Listed FL007B-T PANEL UTOUT 1.375" Wide (34.9) FL007A-PI 0.290" Deep (7.4) 34.5 [1.358] 34.5 [1.358] Butt-On Side Slots 6.1 [0.240] 8.2 [0.323] 10.3 [0.406] 34.7 [1.365] 38.1 [1.500] 1.0 [0.039] 4.8 [0.187] 36.5 [1.437] 7.3 [0.287] FL007 Butt-On Side Slots 6.1 [0.240] 8.2 [0.323] 10.3 [0.406] 34.7 [1.365] 38.1 [1.500] 1.0 [0.039] 4.8 [0.187] 36.5 [1.437] 7.3 [0.287] FL007-S Butt-On entre Hole, Screw Mount 6.1 [0.240] 8.2 [0.323] 10.3 [0.406] 34.8 [1.370] 14.3 [0.563] 36.5 [1.437] 7.3 [0.287] FL007-A Butt-On entre Hole, Screw Mount 6.1 [0.240] 8.2 [0.323] 10.3 [0.406] 34.8 [1.370] 14.3 [0.563] 36.5 [1.437] 7.3 [0.287] FL007-A-S Butt-On Mounting Bracket, 0.150" learance 6.1 [0.240] 8.2 [0.323] 10.3 [0.406] 26.9 [1.059] Hole 34.8 [1.370] 34.8 [1.370] 22.8 [0.898] 12.6 [0.496] 5.2 [0.205] 38.8 [1.528] FL007B Butt-On Mounting Bracket, #6/32 Hole 6.1 [0.240] 8.2 [0.323] 10.3 [0.406] 12.6 [0.496] 26.9 [1.059] 22.8 [0.898] 5.2 [0.205] 38.8 [1.528] #6-32 TAP FL007B-T Butt-On Mounting Bracket, With aptive Nut & Screw 6.1 [0.240] 8.2 [0.323] 10.3 [0.406] 34.8 [1.370] 12.6 [0.496] 26.9 [1.059] 22.8 [0.898] 5.2 [0.205] 38.8 [1.528] FL007B-T Butt-On Mount 14.3 [0.563] 34.8 [1.370] 36.5 [1.437] 11.9 [0.469] FL007A-PI FOR MORE INFORMATION ALL (anada) (A)
11 FLUORESENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8/T-12 LAMPS T-8/T-12 FL010 Series D11 White polycarbonate body, rated 110 Straight-in and U lamp applications, self aligning for U shaped lamps 18 AWG solid wire 5 ¼16" For 0.23" " (0.6 mm mm) Many models to choose from FL010 Available shunted for use with rapid or program start electronic ballasts; saves time and makes wiring easier Two wire ports per terminal for easy harness wiring; double edge contacts Rated 660W, 600V, suitable for all new HO lamps SA ertified/ UL Listed FL010-W 1.01" (25.65).38" (9.65) PANEL UTOUTS.312" (7.93) 1.01" (25.65).38" (9.65) 1.01" (25.65) FL010-WS.38" (9.65) Hole.187" (if required) (4.75) aptive Nut Standard Push-In T-8/T [0.307] 24.5 [0.965] 7.8 [0.307] Low Profile 1.4 [0.055] 22.1 [0.870] 40.5 [1.594] FL [0.015] 22.1 [0.870] 40.5 [1.594] FL010-W 31.7 [1.248] 1.0 [0.039] 18.3 [0.720] 31.7 [1.248] 18.3 [0.720] aptive Nut 1.1 [0.043] 15.9 [0.625] [1.000] 8.7 [0.344] 7.9 [0.313] 34.1 [1.344] FL010-, With aptive Nut 0.4 [0.015] 24.5 [0.965] 22.1 [0.870] 7.8 [0.307] 40.5 [1.594] FL010-W 29.4 [1.157] 18.3 [0.719] 31.7 [1.248] 18.3 [0.720] 7.8 [0.307] 24.5 [0.965] 7.8 [0.307] Shunted 1.4 [0.055] 31.7 [1.248] 1.0 [0.039] 22.1 [0.870] 40.5 [1.594] 18.3 [0.720] FL010-S Shunted 0.4 [0.015] 31.7 [1.248] 22.1 [0.870] 18.3 [0.720] 40.5 [1.594] FL010-WS 10.5 [0.415] 24.5 [0.965] 10.5 [0.415] Wing With 0.4 [0.015] 24.5 [0.965] 22.1 [0.870] 7.8 [0.307] 40.5 [1.594] FL010-WN Wing With Externally Shunted 0.4 [0.015] 22.1 [0.870] 7.8 [0.307] 40.5 [1.594] FL010-WEN 31.7 [1.248] 18.3 [0.720] 31.7 [1.248] 18.3 [0.720] FOR MORE INFORMATION ALL (anada) (A)
12 T-8/T-12 FLUORESENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8/T-12 LAMPS D12 FL011 Series T-8/T-12 White polycarbonate body, rated 110 Turn lock, tall profile 18 AWG solid wire 5 ¼16" For 0.23" " (0.6 mm mm) Two wire ports per terminal for easy harness wiring FL011 Available shunted for use with rapid or program start electronic ballasts; saves time and makes wiring easier Rated 660W, 600V, suitable for all new HO lamps Many models to choose from SA ertified/ UL Listed FL " (25.65).38" (9.65).187" (4.75) PANEL UTOUTS.312" (7.93) 1.01" (25.65).38" (9.65) Standard 1.01" (25.65) FL011-WS.38" (9.65) Push-In [0.987] 8.5 [0.335] 8.5 [0.335] Tall Profile 1.0 [0.039] 30.3 [1.193] 49.8 [1.961] FL [0.015] 30.0 [1.181] 49.8 [1.961] FL011-W 35.0 [1.378] 18.2 [0.717] 35.0 [1.378] [0.987] 8.5 [0.335] 8.5 [0.335] Shunted 1.0 [0.039] 30.3 [1.193] 49.8 [1.961] FL011-S Shunted 0.4 [0.015] 30.0 [1.181] 49.8 [1.961] FL011-WS 35.0 [1.378] 18.2 [0.717] 35.0 [1.378] [0.987] 8.5 [0.335] aptive Nut 1.02 [0.040] 30.3 [1.193] 49.8 [1.961] FL011- aptive Nut 0.4 [0.015] 30.0 [1.181] 8.5 [0.335] 49.8 [1.961] FL011-W 35.0 [1.377] 4.8 [0.189] 1.02 [0.040] 18.2 [0.717] 7.2 [0.283] 35.0 [1.378] [0.987] 8.5 [0.335] aptive Nut 1.02 [0.040] 30.3 [1.193] 49.8 [1.961] FL011-S aptive Nut 0.4 [0.015] 30.0 [1.181] 8.5 [0.335] 49.8 [1.961] FL011-WS 35.0 [1.377] 4.8 [0.189] 1.02 [0.040] 18.2 [0.717] 7.2 [0.283] 35.0 [1.378] *Screws are packed separately. Also available assembled, add Suffix A after part number. FOR MORE INFORMATION ALL (anada) (A)
13 FLUORESENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8/T-12 LAMPS T-8/T-12 FL200 Series Low Profile, Rotary Lock FL201 Series Low Profile, Rotary Lock, T-8 Only D13 FL200 & FL200-S FL201 & FL201-S FL200-N & FL200-SN FL201-N & FL201-SN White polycarbonate body, rated 110 Rotary type lock, low profile for T8/T10/T12 lamps 18 AWG solid wire 5 ¼16" For 0.23" " (0.6 mm mm) Two wire ports per terminal for easy harness wiring Rated 660W, 600V, suitable for all new HO lamps Many models to choose from SA ertified/ UL Listed PANEL UTOUT (9.15) T-8/T (25.5) (4.5) HOLE FOR LOATING NIB, IF NEEDED (7.9) [1.568] [0.875] FL200 Shunted [1.568] [0.875] FL200-S, [1.568] [0.875] 7.87 [0.310] [0.860] FL200-N [1.568] [0.875] 7.87 [0.310] [0.860] FL200-SN 3.56 [0.140] 3.56 [0.140], T-8 Only [1.568] [0.875] 3.81 [0.150] [0.585] 3.18 [0.125] FL201 T-8 Only [1.568] [0.875] 3.81 [0.150] [0.585] 3.18 [0.125] FL201-S 6.35 [0.250] 6.35 [0.250], T-8 Only, [1.568] [0.875] 7.87 [0.310] 3.81 [0.150] [0.585] 3.18 [0.125] [0.860] FL201-N T-8 Only, [1.568] [0.875] 7.87 [0.310] 3.81 [0.150] [0.585] 3.18 [0.125] [0.860] FL201-SN 6.35 [0.250] 3.56 [0.140] 6.35 [0.250] 3.56 [0.140] FOR MORE INFORMATION ALL (anada) (A)
14 T-8/T-12 FLUORESENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8/T-12 LAMPS D14 FL202 Series Tall Profile, Rotary Lock FL203 Series Tall Profile, Rotary Lock, T-8 Only T-8/T-12 White polycarbonate body, rated 110 Rotary type lock, tall profile for T8/T10/T12 lamps 18 AWG solid wire 5 ¼16" For 0.23" " (0.6 mm mm) FL202 Two wire ports per terminal for easy harness wiring Rated 660W, 600V, suitable for all new HO lamps Many models to choose from SA ertified/ UL Listed FL203 PANEL UTOUT (25.5) (9.15) (4.5) HOLE FOR LOATING NIB, IF NEEDED (7.9) [1.852] [1.160] 0.76 [0.030] [0.860] FL202 Shunted [1.852] [1.160] 0.76 [0.030] [0.860] FL202-S, [1.852] [0.860] [1.160] FL202-N [1.852] [0.860] [1.160] FL202-SN 7.87 [0.310] 3.56 [0.140] 7.87 [0.310] 3.56 [0.140], T-8 Only [1.852] 3.18 [0.125] [0.860] [1.160] 0.76 [0.030] 3.81 [0.150] [0.825] FL203 T-8 Only [1.852] 3.18 [0.125] [0.860] [1.160] 0.76 [0.030] 3.81 [0.150] [0.825] FL203-S 6.35 [0.250] 6.35 [0.250], T-8 Only, [1.852] 7.87 [0.310] [1.160] 3.81 [0.150] [0.825] 3.18 [0.125] [0.860] FL203-N T-8 Only, [1.852] 7.87 [0.310] [1.160] 3.81 [0.150] [0.825] 3.18 [0.125] [0.860] FL203-SN 6.35 [0.250] 6.35 [0.250] 3.56 [0.140] 3.56 [0.140] FOR MORE INFORMATION ALL (anada) (A)
15 FLUORESENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8/T-12 LAMPS T-8/T-12 FL204 Series Low Profile FL205 Series Tall Profile, T-8 Only D15 FL204-S FL205-S FL204 FL205 White polycarbonate body, rated 110 Turn type lock, low profile for T8/T10/T12 lamps 18 AWG solid wire 5 ¼16" For 0.23" " (0.6 mm mm) Two wire ports per terminal for easy harness wiring Rated 660W, 600V, suitable for all new HO lamps Available shunted for use with rapid or program start electronic ballasts; saves time and makes wiring easier Many models to choose from SA ertified/ UL Listed T-8/T (9.15) HOLE FOR PANEL UTOUT LOATING NIB, (4.5) (25.5) IF NEEDED (7.9) [0.913] [0.984] [1.484] 8.80 [0.346] FL204 Shunted [0.913] [0.984] [1.484] 8.80 [0.346] FL204-S [1.142] [0.819] [1.142] [0.819], [0.913] [0.984] [1.484] 8.80 [0.346] FL204-N [0.913] [0.984] [1.484] 8.80 [0.346] FL204-SN [1.142] [0.819] [1.142] [0.819] [0.984] 8.80 [0.346] [0.984] 8.80 [0.346], T-8 Only [1.222] [1.801] FL205 T-8 Only [1.222] [1.801] FL205-S [1.142] [0.819] [1.142] [0.819] [0.984] 8.80 [0.346] [0.984] 8.80 [0.346], T-8 Only, [1.222] [1.801] FL205-N T-8 Only, [1.222] [1.801] FL205-SN [1.142] [0.819] [1.142] [0.819] FOR MORE INFORMATION ALL (anada) (A)
16 T-8/T-12 Lampholder FLUORESENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8/T-12 LAMPS D16 FL421 T-8/T-12 Rear Mount T-8/T-12 White polycarbonate body, rated 110 Locking rotor design for maximum lamp retention Snaps into two holes in panel for fast and easy mounting For a 0.023" " (0.6 mm mm) 18 AWG solid wire 5 ¼16" Two wire ports per terminal for easy harness wiring; wires from bottom of lampholder 27.8 [1.094] 30.4 [1.197] 15.2 [0.598] 27.3 [1.075] 24.2 [0.953] 10.3 [0.406] Rated 660W, 600V, suitable for HO lamps SA ertified/ UL Listed FL421S T-8/T-12 Rear Mount With Spring Plate 32.9 [1.295] 27.8 [1.094] 10.3 [0.406] 15.2 [0.598] 13.0 [0.512] 27.3 [1.075] White polycarbonate body, rated 110 Locking rotor design for maximum lamp retention Snaps into two holes in panel for fast and easy mounting For a 0.023" " (0.6 mm mm) Spring plate allows for lamp tolerance compensation 18 AWG solid wire 5 ¼16" 24.2 [0.953] Two wire ports per terminal for easy harness wiring; wires from bottom of lampholder Rated 660W, 600V, suitable for HO lamps SA ertified/ UL Listed FL500-BL T-8/T-12 Butt-On Type, Black FL500-WH T-8/T-12 Butt-On Type, White 1.25 (31.5) (16) 0.328" (8.33) (26.5) PANEL UTOUT 1.010" (25.7) 0.875" (22.2) 0.156" DIA (3.96) Made from Black Phenolic or White thermosetting plastic Available with snap-in springs Plain hole or tapped hole Supplied with 9" TEW 105 wire leads Lead can be brought out either straight down or through hole in rear FL-500-BL Black Type FL-500-WH White Type FL BL Black 2 x 0.140" diameter holes FL WH White 2 x 0.140" diameter holes FL BL Black 2 x 4-36 tapped holes FL WH White 2 x 4-36 tapped holes Rated 660W, 600V UL Listed & SA Approved FOR MORE INFORMATION ALL (anada) (A)
17 FLUORESENT IRLINE LAMPHOLDERS G10Q BASE ircline 709 G10Q Socket with 2 Mounting Ears D17 Available only for anadian market White thermoplastic body 1.05 (26.7) 0.63 (16.0) 1.64 (41.7) (3.3) THRU 0.22 (5.6) -BORE 0.08 (2.0) DEEP 0.20 (5.1) Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 7 ¼16" 0.38 (9.7) 1.25 (31.8) 709 socket has 2 mounting ears to screw down to panel Rated 660W, 600V UL Listed & SA ertified 0.50 (12.7) ircline G10Q Floating Socket T G10Q Floating Socket With 9" TEWN Leads 0.63 (16.0) 0.31* (7.9) 0.50 (12.7) 1.05 (26.7) 0.25* (6.35) 0.52 (13.2) 0.20 (5.1) *LAMP PIN - TYPIAL ALL 709 s Available only for anadian market White thermoplastic body Floating version of socket has push-in wire terminals for 18 AWG solid wire, stripped 7 ¼16" T has 9" TEWN 18 AWG leads attached (2 Blue, 2 Yellow), stripped 1 ¼2" Rated 660W, 600V UL Listed & SA ertified G10Q Mount 0.63 (16.0) (9.5) 0.14 (3.6) 1.05 (26.7) PANEL THIKNESS ( ) 0.36 (9.1) 0.50 (12.7) 0.95 (24.1) Available only for anadian market White thermoplastic body 1.05 (26.7) 0.19 (4.8) Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 7 ¼16" Snaps into panel for fast and easy installation Rated 660W, 600V UL Listed & SA ertified 0.78 (19.8) DIA PANEL UTOUT FOR MORE INFORMATION ALL (anada) (A)
18 ircline FLUORESENT IRLINE LAMPHOLDERS G10Q & 2GX13 BASE D G10Q Floating Socket 0.86 (21.8) ircline Available only for anadian market White polycarbonate body, rated 125 Floating socket holds securely to lamp 0.52 (13.2) Quick connect push-in wire terminals for 18 AWG Solid or Bonded copper wire, stripped 7 ¼16" 0.78 (19.8) 0.19 (4.8) (16.3) 0.50 (12.7) Rated 660W, 600V UL Listed & SA ertified 499 2GX13 Snap/Screw Mount LAMP 0.61 (15.5) 0.93 (23.6) 0.90 (22.9) 0.79 (20.1) 0.62 (15.8) Available only for anadian market White polycarbonate body, rated 125 For new HO circline lamps Quick connect push-in wire terminals for 18 AWG Solid or Bonded copper wire, stripped 7 ¼16" 0.24 (6.1) 0.13 (3.3) (38.1) (2.4) FOR SELF TAPPING Self tapping or through hole mount Rated 75W, 600V UL Listed & SA ertified (3.6) THRU HOLE 499-lip for 499 Mount Above (11.2) (6.35) Available only for anadian market Made from stainless steel Holds lamp at proper height Screw mounts to panel FOR MORE INFORMATION ALL (anada) (A)
19 FLUORESENT IRLINE LAMPHOLDERS G10Q BASE ircline ircline lip D19 Minimum required: 3 per lamp lips are nickle-plated steel Holds lamp securely in place Standard lip: X = 1" (25.5 mm) Y = 0.87" (22 mm) Y T10 X ircline FLUORESENT LAMPHOLDERS FOR T-2 LAMPS 290/V-FF T-2 Base, Screw Mount R PANEL UTOUT 3.5 Made from Polycarbonate, rated 125 Phosphor bronze contact Screw mounts into panel horizontally Lead length is 6" (15 cm), 18 AWG wire Screw mounts into 0.140" holes in panel International ratings available upon request Other approvals are pending Two anti-rotation holes can also be added for better stability Rated 75W, 600V UR/cUR Recognized FOR MORE INFORMATION ALL (anada) (A)
20 Starter Bases FLUORESENT STARTER BASES D20 FSB Series Starter Bases Starter Bases Tall Bracket 31.5 [1.240] 24.5 [0.965] fl 3.5 [fl 0.138] 11.0 [0.433] FSB [1.204] Made from high heat polycarbonate Many mounting methods available High strength Brass alloy contacts Quick connect push-in wire terminals accept 18 AWG solid or over tinned leads, stripped 1 ¼2" White colour is standard; Black is available upon request, with minimums 34.3 [1.350] FSB-001 Screw Mount, (2) Holes 31.5 [1.240] 24.5 [0.965] Starter holders may be ordered with leads attached, subject to minimums Rated 660W, 600V Suggested mounting hole for FSB-001 shown above SA ertified/ UL Listed fl 3.5 [fl 0.138] 11.0 [0.433] FSB-002 Screw Mount, (2) #6/32 Tapped Holes 31.5 [1.240] 24.5 [0.965] #6-32 TAP 11.0 [0.433] FSB-003 Tall Bracket, (2) #6/32 Tapped Holes #6-32 TAP 31.5 [1.240] 36.5 [1.437] 46.5 [1.831] 8.0 [0.315] 33.5 [1.319] 25.3 [0.996] 11.0 [0.433] FSB-004 Tall Bracket, (2) Holes 31.5 [1.240] fl 3.8 [fl 0.150] FSB-005 Flat Bracket, (2) Holes 8.0 [0.315] 31.5 [1.240] fl 3.3 [fl 0.130] FSB [2.000] 58.6 [2.307] 28.6 [1.126] 36.5 [1.437] 44.5 [1.752] 12.0 [0.472] Flat Bracket, (2) Holes 8.0 [0.315] 31.5 [1.240] fl 4.0 [fl 0.157] FSB-007 Short Bracket, (2) Holes 31.5 [1.240] 8.0 [0.315] 12.0 [0.472] 8.0 [0.315] FSB [1.437] 44.5 [1.752] 12.0 [0.472] 44.0 [1.732] 52.0 [2.047] fl 4.5 [fl 0.177] Single Leg Bracket 33.7 [1.328] 18.6 [0.731] fl 3.0 [fl 0.118] 8.8 [0.346] 31.8 [1.250] 11.0 [0.433] 33.6 [1.323] 3.4 [0.134] FSB-009 Single Leg Bracket, #6/32 Tapped Hole 33.7 [1.328] 18.6 [0.731] # [0.346] 31.8 [1.250] 11.0 [0.433] 33.6 [1.323] 3.4 [0.134] FSB [1.240] 31.5 [1.240] FOR MORE INFORMATION ALL (anada) (A)
21 FLUORESENT STARTER BASES & STARTERS Starter Bases FSB-268 Starter Base, Top/Bottom D Made from high strength polycarbonate an be mounted either above or below surface Snaps into two holes in panel for quick assembly For 0.023" " (0.6 mm mm) PANEL UTOUT Quick connect push-in wire terminals accept 18 AWG solid or pre-tinned leads, stripped 3 ¼8" Rated 660W, 600V c SA us ertified/c UL us Listed Starter Bases FS Series Starters These quality long life starters are used to ignite fluorescent lamps Availaible in plastic or metal can UL Listed & SA Approved Metal ase Plastic ase For Use With FS-2M FS-2P 14, 15, 20W Linear Lamps FS-4M FS-4P 13, 30, 40W Linear Lamps FS-5M FS-5P 4, 5, 6, 8W Linear Lamps FS-12M FS-12P 32W ircline Lamps FS-25M FS-25P 22, 25W ircline Lamps FOR MORE INFORMATION ALL (anada) (A)
22 T-8/T-10/T-12 Lampholder Accessories FLUORESENT LAMPHOLDER AESSORIES FOR T-8/T-10/T-12 LAMPS D22 Lamp Support lips Accessories lip for T8 Lamp, made of nickel-plated steel, mounts into 0.314" (8 mm) hole 34 - lip for T12 Lamp, made of nickel-plated steel, mounts into 0.314" (8 mm) hole 36 - Screw Mount lip for T5 Lamp, made of nickel-plated steel, mounts into 0.157" (4 mm) hole 37 - Screw Mount lip for T8 Lamp, made of nickel-plated steel, mounts into 0.157" (4 mm) hole 38 - Screw Mount lip for T12 Lamp, made of nickel-plated steel, mounts into 0.157" (4 mm) hole Screw Mount lip for T8 Lamp, made of Polycarbonate, mounts into 0.157" (4 mm) hole Screw Mount lip for T12 Lamp, made of Polycarbonate, mounts into 0.157" (4 mm) hole TL-1 Tube Locks TL-1 Made from White heat resistant Polypropylene Prevents lamps from shattering in fixtures by locking out pins Simply slides on to most industry T8/T12 lampholders For high vibration applications FOR MORE INFORMATION ALL (anada) (A)
23 FLUORESENT LAMPHOLDER AESSORIES FOR T-8/T-10/T-12 LAMPS T-8/T-10/T-12 Lampholder Accessories Tube Protectors D23 TUBE PROTETORS FOR END AP LEAR TUBE UV FILTERING TUBE LAMP TYPE T12 LAMPS T12 LAMPS F40T12 PAL 40T12 40T12UV F48T12 PAL 48T12 48T12UV F72T12 PAL 72T12 72T12UV F96T12 PAL 96T12 96T12UV F96T12HO PAL 96T12HO 96T12HOUV F96T12VHO PAL 96T12VHO 96T12VHOUV Accessories FOR END AP LEAR TUBE UV FILTERING TUBE LAMP TYPE T12 LAMPS T12 LAMPS F15T8 PAL T8 18T8 18T8UV F25T8 PAL T8 36T8 36T8UV F32T8 PAL T8 40T8 40T8UV F96T8 PAL T8 96T8 96T8UV Provides full protection from lamp breakage or shattering by retaining the glass fragments and phosphors Made from high strength extruded Polycarbonate Warning: E ONLY ON T8 LAMPS UNDER THE FOLLOWING ONDITONS: 1. The T8 lamps are used with an electronic ballast that has end of life shutdown to prevent the overheating of lamps at the end of life. 2. T8 lamps that are operated using a magnetic ballast. WE DO NOT REOMMEND ING PROTETIVE SLEEVES ON T8 LAMPS UNDER ANY OTHER ONDITIONS. FOR MORE INFORMATION ALL (anada) (A)
SECTION F HALOGEN LAMPHOLDERS HALOGEN LAMPHOLDERS. 1850 Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104
1850 Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104 SECTION F HALOGEN LAMPHOLDERS F1 HALOGEN LAMPHOLDERS Halogen Sockets Halogen Lamps F2 Bi-Pin Halogen G4/GZ4 Base
More informationRSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz RSS Installation
More information08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
More informationPB accessories. PB accessories. Labelling option. Order Information B4-2728. Printed board handle A BZA42727 BZA42724.
Printed board handle A Assembly behind front panels Only use printed board handle in conjunction with printed board retainer A (6087-097) Insertion and extraction function Labelling option B4-2728 Item
More information400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More informationDirectory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More informationDirectory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
More informationSTANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
More informationAssembly Instructions Model 1544 Heart-Of-The-Kitchen Island
Assembly Instructions Model 1544 Heart-Of-The-Kitchen Island A. These units are Ready-to-Assemble. Catskill uses positive fastening methods such as wood screws and in some places hidden Bastion fasteners.
More informationThis product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
More information2010-2011. Shortform Catalogue. Solutions for appliance & electronic applications. rocker switches. lever. switches. push. switches.
2010-2011 Solutions for appliance & electronic applications Shortform Catalogue rocker lever push vandal resistant slide door snap-action & safety rotary IEC sockets fuseholders indicators A trading name
More informationAnodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
More informationHALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
More informationIEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
More informationpicomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
More informationCOAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationTrapezoidal-Connectors Series TMC
Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications
More informationAmphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
More informationBUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
More informationLinear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
More informationCoyote popup features
Coyote popup features The Coyote popup display system combines strength, reliablility, and style in a lightweight and easy to use system. It is fully magnetic, making it simple to assemble and disassemble,
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationTopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
More informationdesign Mario Cucinella MAXIWOODY
58 MAXIWOODY MAXIWOODY 59 Woody was created in 1996. The success of that luminaire with its simple, rounded design, distinctive and instantly recognizable as it was, led to the development of a whole family
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More information1 Door Tall Unit ASSEMBLY GUIDE. Page 1 of 9. WARNING: Contains small parts, keep out of reach of children.
Page 1 of 9 ASSEMBLY GUIDE 1 Door Tall Unit IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present If any parts are missing from Parts List 1, please
More informationThe Miniature Railway Supply Co. Ltd.
The Miniature Railway Supply Co. Ltd. 42 Stratford Way, Boxmoor, Hemel Hempstead, Herts, HP3 9AS, England Telephone, Fax and Answerphone: 01442 214702 E-mail: sales@mrsc.org.uk www.mrsc.org.uk 2005A Contents
More informationCIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
More informationWren Kitchens Installation Tips... 3. Carefully check your kitchen delivery... 4. Measuring out and marking up... 5. Fitting the base cabinets...
tra 1 Index Wren Kitchens Installation Tips... 3 Carefully check your kitchen delivery... 4 Measuring out and marking up... 5 Fitting the base cabinets... 6 Fitting the corner cabinets... 7 The 972mm or
More informationCoyote popup features
Coyote popup features The Coyote popup display system combines strength, reliablility, and style in a lightweight and easy to use system. It is fully magnetic, making it simple to assemble and disassemble,
More informationH45 LED - Direct and indirect pendant
RAL 01 10 00 IP 20 230V 50/60Hz Specifications Direct and indirect light pendant linear luminaire. Aluminium profile. Diffusers in frosted polycarbonate profile. Driver included. Supplied with clear base,
More informationHOW TO... Channel Window Balances
Take Out Clips Open HOW TO... Channel Window Balances Used On Single Or Double Hung Sash Balance Shown Installed In Jamb With Sash Removed Remove the sash stops. Close sash to expose take-out clips. Open
More informationINSTALLATION AND SERVICE MANUAL
CI8100 IMI Wilshire, Inc. IMI WILSHIRE, INC. COUNTER INTELLIGENCE BEVERAGE SYSTEM CI8100 INSTALLATION AND SERVICE MANUAL 1993 IMI Wilshire, Inc. TABLE OF CONTENTS CI8100 IMI Wilshire, Inc. SECTION I CI8100
More informationIntroduction... 3 Setting the Combination... 4 Securing the DEFCON CL... 5 Locking the DEFCON CL to your Notebook Computer...
notebook security DEFCON CL cable lock USER GUIDE Visit our Website at www.targus.com Features and specifications subject to change without notice. 2006 Targus Group International, Inc. and Targus, Inc.
More informationTHE ADVANTAGES ARE YOURS
THE ADVANTAGES ARE YOURS The new switches/discrepancy switches "R0-DR0" have special characteristics that make them very different from the normal switches on the market. Listed below are some of the many
More informationEZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-21
EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-21 Case IH MXU 100 Pro MXU 110 Pro MXU 115 Pro MXU 125 Pro MXU 135 Pro MXU 100 X Line MXU 110 X Line MXU 115 X Line MXU
More informationFASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
More informationSignaling Lights. LH Series Surface Mount Indicators. Part Numbers. Jumbo Dome (one color) Jumbo Dome (two color)
Innovative indicators in a slim & stylish design. uces installation space. LH Series Surface Mount Indicators Key features of the LH series include: Direct mounting on surfaces such as panels, aluminum
More informationDell P Series Monitor VESA Mounting Bracket Installation Instructions
Dell P Series Monitor VESA Mounting Bracket Installation Instructions The VESA mounting bracket enables a Wyse cloud client to be mounted to the Dell P Series Monitor and the Dell E24 Monitor. The cloud
More informationCoyote popup features
Coyote popup features The Coyote popup display system combines strength, reliablility, and style in a lightweight and easy to use system. It is fully magnetic, making it simple to assemble and disassemble,
More informationQM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
More informationMIRAGE. Set-Up Instructions. www.skyline-exhibits.com
MIRAGE Set-Up Instructions www.skyline-exhibits.com Table of Contents Mirage is available in many sizes from 32 tall tabletops to 92 tall backwalls. The following set-up and repacking instructions depict
More informationCable Tie Mounting Bases
Temperature Rating: 0ºC to 66ºC (32ºF to 150ºF) *Synthetic Rubber Adhesive Choose from adhesive-backed, epoxy or screw mounting bases! Available in a variety of materials for both indoor and outdoor use
More informationCONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
More informationCluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationOutdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationSSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationQUANTIFYING SOLAR ENERGY
www.sustainicum.at QUANTIFYING SOLAR ENERGY Recommendations for implementation in the course Author: E-Mail address: Institution: Philipp Weihs weihs@mail.boku.ac.at BOKU Important considerations Very
More informationEZ-Steer Assisted Steering System
EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-21 Case IH Puma 165 Puma 180 Puma 195 Puma 210 New Holland T7030 T7040 T7050 T7060 Revision A June 2007 Part Number 53345-21-EU2
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
More information19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
More informationWatertight Luminaire, surface, 1x18W / 2x18W / 2x24W / 1x36W / 2x36W / 2x54W
Watertight Luminaire, surface, 1x18W / x18w / x4w / 1x36W / x36w / x54w IP67 00 cd/klm 18W 36W 30V/ 50/60Hz 1x18W 5105 0005..-xxx.8 x18w 5105 0001..-xxx 3.8 x4w 5105 0045..-xxx 3.0 x54w 5105 0044..-xxx
More informationMANUAL TRANSMISSION CONTENTS ...
22D-0-1 MANUAL TRANSMISSION CONTENTS GENERAL INFORMATION... 22D-0-3 1. SPECIFICATIONS... 22D-1-1 TRANSMISSION MODEL TABLE GENERAL SPECIFICATIONS SERVICE SPECIFICATIONS TORQUE SPECIFICATIONS............
More informationCP2 Buried Cable Pedestal Initial & Rehab Installation Instructions
Printing 3 March 2008 CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions This instruction is intended for CP2 cable pedestal installations and replacements. The following tools will be
More information.062 [1.57] Commercial Pin and Socket Connectors
Pin and Socket onnectors MP Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin
More informationModel: LCDM40 4.0 LCD Rear Vision Mirror Monitor Installation Manual Features
Model: LCDM40 4.0 LCD Rear Vision Mirror Monitor Installation Manual Features Mirror with built in 4.0 LCD Monitor Low Profile, Slim Design High Resolution TFT LCD Built in Speaker Two video inputs Fully
More informationCHAPTER 5 PARTS. This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation.
CHAPTER 5 PARTS PARTS BY PICTORIAL This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation. NOTE: The following is a breakdown description of the
More informationLED High Bay Light 100W
LED High Bay Light 100W CRI: Life Hours: LED Count: Net Weight: 100W 7,527lm (5,500K-6,000K) 70 20.25in(D) Reflector 140 Up to 50,000 hrs 1 High Power 10x10 LED Array Hanging Loop -40-113 -277VAC 1.00
More informationEZ-Steer Assisted Steering System
EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-54 Case IH CVX 1135 CVX 1145 CVX 1155 CVX 1170 CVX 1190 CVX 1195 CVX 135 CVX 145 CVX 155 CVX 175 CVX 195 New Holland TVT
More informationSMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationINSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
More information14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
More informationSOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
More informationELECTRONICS G H I J K L M
ELECTRONICS TM LASER INSTALLATION INSTRUCTIONS PARTS KIT Parts Kit includes the following: A- (1) Universal Mounting Bracket A B- (1) Red L.E.D. Laser Alert Light C- (1) Piezo Beeper w/ O Ring Tape D-
More informationAmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
More informationCUSTOM AUXILIARY FORWARD LIGHTING KIT
-J0 REV. 0--0 CUSTOM AUXILIARY FORWARD LIGHTING KIT GENERAL Kit Number -0, 0000 Models This Custom Auxiliary Lighting Kit adds lamps and turn signals to 00 and later FLHX model motorcycles. Additional
More informationPower Supply Cables and Connectors
Power Supply Cables and Connectors Often during the excitement of designing a challenging new system, some of the more mundane engineering aspects get overlooked. This is especially true of connections
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationEXPLORE 4-Leg Teaming Table with Screen Share Assembly Instructions
EXPLORE 4-Leg Teaming Table with Screen Share Monitor Display Requirements: your flat panel display must confirm to the following requirements. y With the stand removed, the monitor must not exceed 40
More informationSMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationBNC, N, TNC Connectors
BNC, N, TNC Connectors ONLINE CATALOG AEP BNC, N, and TNC series connectors are specifically designed for use with miniature flexible and semi-rigid cable. They are available with goldplated or nickel-plated
More informationInnovative Engineering Solutions. Terminal Blocks
Innovative Engineering Solutions Terminal Blocks Contents Selection Guide.... 2 TERMINAL BLOCKS ] Single Row SE/SEI............................................... 6 32500... 8 37000/38000... 10 CB/CFT...
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More informationFeed-through terminal blocks for high-current applications
596 PHOENIX CONTACT With the feed-through terminal blocks, you can freely select the connection technology. Choose between traditional screw connection, robust bolt connection, and convenient push-in connection
More informationGeneral Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
More informationSwitches and Indicators. Swisstac
Switches and Indicators Switches and Indicators Index Series Description Page 583 Product Assembly Page 584 Mounting Instruction Page 585 Product Range - pushbuttons for standard mounting - pushbuttons
More informationINSTALLATION INSTRUCTIONS: Viewline 85 mm
1-10 1 Safety information The product was developed, manufactured and inspected according to the basic safety requirements of EC Guidelines and state-of-the-art technology. The unit is designed for use
More informationLIEBERT VNSA Installation Sheet
LIEBERT VNSA Installation Sheet Description The Liebert vnsa network switch is designed for connecting multiple Ethernet-ready devices and comes in various models. The unit may have: A Liebert icom display
More informationUFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
More informationAll work must conform to the National Electric Code, latest edition, and all other applicable codes and regulations.
DIVISION 16 ELECTRICAL SECTION 16100 - ELECTRICAL PART 1 - GENERAL SCOPE All electrical work as shown on the drawings and as necessary to provide a complete electrical system. Include primary service,
More informationPin/terminal: Wire protect: Screw/torque: Dubilier Connectors. Plan Pin Dia 1.0 Rec-hole Size 1.1. Pin/terminal: Wire protect: Screw/torque:
TERMINA BOCKS mm PITCH VERTICA MOUNT mm Pitch and 3 pole interlocking 4- pole solid, end stackable U94v-0 Flame retardant material.mm wire acceptance U/VDE approved Screw terminal 7.A/380V Dielectric Strength:
More informationMazda CX7 2007-09 99-7508
INSTALLATION INSTRUCTIONS FOR PART 99-7508 APPLICATIONS Mazda CX7 2007-09 99-7508 KIT FEATURES DIN Radio Provision with Pocket ISO Mount Radio Provision with Pocket Double DIN Mount Radio Provision Stacked
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationMCR1900 Media Converter 19-Slot Chassis
MCR1900 Media Converter 19-Slot Chassis Installation Guide Part #5500304-11 Copyright Statement This document must not be reproduced in any way whatsoever, either printed or electronically, without the
More informationTechnical Information
Technical Information This section of the catalogue provides technical information that will help specify, install and maintain Surelock McGill devices and components. The topics are listed below: Blast
More informationSMD Rework Station TABLE OF CONTENTS
SMD Rework Station Thank you for purchasing the Hakko 50B SMD Rework Station. The Hakko 50B is designed to solder and desolder surface mounted devices with hot air. Please read this manual before operating
More informationVinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows
Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows Viewed from the exterior. IMPORTANT: Please read before you begin installation. TABLE OF CONTENTS AND TOOL / MATERIAL
More informationCable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers
SnapStak Hangers New design increases stack height SnapStak hangers have become the industry standard for maximizing space utilization on crowded towers and now that utility is further expanded with the
More informationCall for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
More information