DIGITAL RADIO CONTROLLED WATCH INSTRUCTIONS (USA)

Transcription

1 DIGITAL RADIO CONTROLLED WATCH INSTRUCTIONS (USA) Your Radio Controlled Watch incorporates a highly sensitive radio receiver. It recalls the U.S. Atomic Clock The official U.S. time that governs ship movements, radio stations, space flights, and warplanes. (which measures each second of time as 9,192,631,770 vibrations of a cesium 133 atom in a vacuum) and give time which is accurate to 1 second every million years. Your Radio Controlled Watch even account automatically for daylight saving time, leap years, and leap seconds. For more details about the U.S. Atomic Clock, please visit Automatic Time Setting Your B.A.T. radio controlled watch recalls the U.S. Atomic Clock automatically at 3:00am every night. After reception of signal it will show the official U.S. time on the watch. Everything is done automatically. However, your watch provides manually setting for your option. Before using your watch: You have to set the Time Zone to tell your watch where you are. Go to Time Zone setting to learn how to set your watch at P, M, C or E (P=Pacific, M=Mountain, C=Central, E=Eastern Coast).

2 Time Display of the Watch 1. Hours, minutes, seconds, Day of week, Month, Day, PM 2. There are 2 Alarms: AL1=Alarm 1, AL2=Alarm 2 3. Time Zone indicator (P=Pacific, M=Mountain,, C=Central, E=Eastern, None=other) 4. The Radio tower icon will be hoisted when a Time signal has been received successfully 5. A SUN icon will be hoisted during DST (Daylight Saving Time) in Summer Buttons and Functions: 1. Upper-Right button (S1) : Manual Time Signal receive/advance digits -Pressing and bolding this button for 5 seconds activates the signal receiver for manual time signal reception 2. Lower-Right button (S2): Reverse digits/light Pressing the button will decrease the flashing digit. Continue to hold the button for rapid change Press once to turn on the EL backlight for around 3 seconds 3. Upper-Left button (S3): Mode Pressing and holding the Mode button for more than 2 seconds enables the setting mode of the display screen. Flashing digits can be adjusted with S1 or S2 buttons. The watch will automatically return to the time display if no buttons are pushed for 5 seconds during set up mode 4. Lower-Left button (S4): Alarm and Time Zone 5. Beeping Alarm: To shut off a beeping alarm, press any button. Set Time Zone: Your radio controlled watch set all time setting by itself automatically with a successful reception except Time Zone. So, you have to set your watch to the time zone you are in. (Note: Your watch will not automatically adjust to a new time zone if you are traveling. You must change this setting each time, but once changed, it will continue to keep exact time.) Follow this simple steps to set the Time Zone: 1. Press (S4) button three times and the hour offset time zones will be displayed. 2. Press and hold the (S3) button until the offset hours digits start to flash.

3 Press (S1) or (S2) buttons to adjust offset hours. For standard time: (Eastern = -5) (Central = -6) (Mountain = -7) (Pacific = -8) 3. Press the (S3) button once, then press the (S4) button to return to time display. Table of Time Zone against 31 major City Name If you travel to country where no Radio Signal is available, your watch will continue to function in the same way as a standard watch. Time Zone City Code (City Name) +0 (UK) LON (London) Radio Signal available +1 (Europe) BER (Berlin) Radio Signal available +1 (Europe) PAR (Paris) Radio Signal available +1 (Europe) ROM (Rome) Radio Signal available +1 (Europe) AMS (Amsterdam) Radio Signal available +1 (Europe) BRU (Brussels) Radio Signal available +1 (Europe) STO (Stockholm) Radio Signal available +1 (Europe) WAW (Warsaw) Radio Signal available +1 (Europe) MAD (Madrid) Radio Signal available +2 CAI (Cairo) +3 MOW (Moscow) +4 DXB (Dubai) +5 KHI (Karachi) +6 DAC (Dacca) +7 BKK (Bangkok) +8 PEK (Beijing, China) +8 HKG (Hong Kong, China) +9 SEL (Seoul, Korea) Radio Signal available +9 (Japan) TYO (Tokyo) Radio Signal available +10 SYD (Sydney) +11 NOU (Noumea) +12 AKL (Auckland) Time Zone City Code (City Name) HNL (Honolulu) -9 ANC (Anchorage)

4 -8 (Pacific : P) LAX (Los Angeles) Radio Signal available -7 (Mountain : M) DEN (Denver) Radio Signal available -6 (Central : C) CHI (Chicago) Radio Signal available -5 (Eastern : E) NYC (New York) Radio Signal available -5 YUL (Montreal, Canada) -4 CCS (Caracas) -3 RIO (Rio De Janeiro) Manual Time and date setting: A) Press and hold (S3) button (12 or 24 mode will flash). Press (S1) or (S2) buttons to select 12/24 hour mode. Press (S3) button to advance to Year (year will start flashing) Press (S1) or (S2) buttons to set the desired year. B) Press (S3) button to advance to month (month of year will flash) Press (S1) or (S2) buttons to set the desired month. C) Press (S3) button to advance to day of month (day of month will flash). Press (S1) or (S2) buttons to set the day of the month. D) Press (S3) button to advance to day of week (day of week wil flash) Press (S1) or (S2) buttons to set the desired day of week. E) Press (S3) button to advance to hours (hours will flash) Press (S1) or (S2) buttons to set the desired hour. F) Press (S3) button to advance to munutes (minutes will flash) Press (S1) or (S2) buttons to set the desired munute. G) Press (S3) button to advance to seconds (seconds will flash) Press (S1) or (S2) buttons to set seconds to zero (00). Set Alarms: This watch has two alarms that can be activated. Pressing any button will turn the alarm sound off once activated. If no button is pushed, it will automatically shut off after 2 minutes. To Set Alarm #1: A) Press (S4) button once (alarm #1 time will be displayed) B) Press and hold (S3) Button (hour will start to flash)

5 Press (S1) or (S2) buttons to set the desired hour. C) Press (S3) button to advance to minutes (minutes will start flashing) Press (S1) or (S2) buttons to set the desired minute. D) Press (S3) button to advance to (on/off) Press (S1) button to set alarm to ON or OFF. (on=on, of=off) E) The actual time will automatically display after 15 seconds To Set Alarm #2: A) Press (S4) button twice (alarm #2 time will be displayed) B) Press and hold (S3) button (hour will start to flash). Press (S1) or (S2) buttons to set the desired hour. C) Press (S3) button to advance to minutes (minutes will start flashing) Press (S1) or (S2) buttons to set the desired minutes. D) Press (S3) button to advance to (on/off) Press (S1) button to set alarm to ON or Off. (on= ON, of = OFF) E) The actual time will automatically display after 15 seconds. EL Backlight Press (S2) once to turn on the EL backlight for around 3 seconds SIGNAL SEARCH Automatic search This watch is designed to receive a signal automatically once a day at 3:00am. (local time) which synchronizes with the WWVB time/date broadcast signal from Fort Colins, CO. Reception Status: If the reception was successful, the tower icon will remain on all day. It will automatically search at 3:am the next day to update again. If the reception was not successful, the tower icon will be off which means that the signal was not received at 3:am. It will automatically search at 3:am the next day to try to update itself again. (Note: you may try to manually search for the signal between automatic searches).

6 Manual Signal Search: Press and hold the (S1) button to activate the signal receiver (tower icon begins to flash for up to 10 minutes). Do not press any buttons during the signal search time. Signal Strength: During the search mode, if the tower only displays the lower triangle portion of the icon, the reception area is low and it is best to move to a different location and retry. If the tower displays both the lower triangle and the wave signals of the icon, the reception area is stronger. However, may not insure that the watch successfully receives the signal, as there may have been some interference during transmission. Time Change Adjustment If the watch receives the signal at 3:00am during the fall or spring time change, it will automatically adjust to the correct time. During daylight savings time, each time the signal is received, the sun icon will also be displayed with the tower. (Note: If you live in an area that does not observe the daylight savings time change, you will have to manually change the time zone setting ahead one time zone at this feature cannot be turned off). TROUBLESHOOTING: At times your watch may be placed in a position where signal reception becomes difficult due to interference. Interference can be due to electrical appliances such as a TV, refrigerators, computers, fluorescent lamps or natural events such as thunderstorms. It is important that you do not leave your watch on a metallic surface and keep away from any sources of electromagnetic interference. If you continue to have unsuccessful signal reception, you may want to place your watch near a window where it shows a strong reception signal (facing Colorado). The signal will usually be received during the early morning hours when the signal reception is the strongest. CARE OF YOUR WATCH

7 - Never attempt to open the case or remove the back cover at the watch contains precise components. - Never swim with the watch or submerge under water. Should water or condensation appear in the watch, take the watch to a jeweler to check immediately as water can corrode electronic parts inside the watch. - Avoid exposing the watch to long period of extreme temperatures. Normal operation between 0C-50C/32F-122F. - The watch is designed to withstand impact under normal use only. It is not advisable to subject it to rough usage or to drop it onto hard surfaces. - Keep your watch away from the conditions of strong electric fields and static electricity. - Clean the watch with a soft cloth only. Avoid using chemicals, especially soap. SERVICE: It is recommended that service be performed by a professional jeweler or a qualified professional only. Battery Replacement: Requires battery CR2025. Your watch is a delicate instrument and requires special tools for changing the battery, therefore, we recommend that qualified personnel only change the battery in your watch. Automatic reception will activate once after the battery is replaced. Limited Warranty: The following limited warranty applies to the original U.S/Canadian consumer only: Basic Coverage: Your watch is warranted to the original consumer for a period of 1 year from the date of purchases against defects in workmanship. Service Coverage: If your watch develops a manufacturing defect within the 1-year warranty period, it will be replaced with an identical or similar model, or repaired with new or thoroughly reconditioned and inspected components. Our limited warranty does not cover repair services for defects or damages to your watch: - relating to servicing not performed by authorized personnel or us

8 - resulting from tamper, misuse, abuse, or alteration; - after the warranty period expires; - battery, lens, band or strap, watch case; - We may charge you for replacing any of these parts To Obtian Warranty Service: -