Using AIS Server with ShipPlotter Guide. Copyright SiiTech Inc. All rights reserved.
|
|
|
- Marjory Lambert
- 9 years ago
- Views:
Transcription
1 Using AIS Server with ShipPlotter Guide Copyright SiiTech Inc. All rights reserved.
2 Contents Overview of AIS Server... 3 Starting AIS Server... 4 Configuring AIS Server for communicating with ShipPlotter... 6 Receiving AIS data from ShipPlotter using UDP protocol... 6 Sending AIS data to ShipPlotter using UDP protocol... 8 Sending AIS data to ShipPlotter using TCP protocol (Method 1: AIS Server is a TCP client, ShipPlotter is a TCP server) Sending AIS data to ShipPlotter using TCP protocol (Method 2: AIS Server is a TCP server, ShipPlotter is a TCP client) Sending AIS data to SiiTech Web VTS service Sending AIS data from ShipPlotter to SiiTech Web VTS (Method 1) Sending AIS data from ShipPlotter to SiiTech Web VTS (Method 2)
3 Overview of AIS Server AIS Server is a software tool for a wide range of AIS (Automatic Identification System) users. AIS Server connects AIS network nodes (AIS base stations/transponders/receivers, AIS services/clients, databases, and/or networks) and allows AIS messages to easily and efficiently flow from one node to another. It connects at least two nodes and sends each AIS message based on the current configuration of the nodes. You configure AIS Server to pass along certain messages to certain nodes on a network. AIS Server can also store all received AIS messages in the databases or text files. SiiTech has developed a modular and scalable AIS Server solution that meets the needs of all kinds of AIS users. For shore-based networks, AIS Server enables the flow of information from one or more isolated base stations to a Vessel Traffic Services (VTS) centre. With AIS Server all VTS centers may be joined in a regional or national AIS network. The distribution of AIS data (standard and proprietary messages) from one central location to shared locations makes AIS Server essential in many diverse environments. AIS Server performs a number of functions when data is passed into it; unlike hardware routers found on the internet that simply pass information from one network to another. AIS Server can filter data as it is received, and does not necessarily forward all received information. Nodes are allowed to forward and/or accept messages on a case by case basis. Proprietary message handling capability allows SiiTech to offer complete customization of AIS Server to meet your specific needs. The future of your network is dependant on the flow of information from all nodes (AIS transponders/receivers, users, databases, and/or networks). AIS Server provides a reliable flow of AIS data to your environment that is flexible and highly configurable. AIS Server designed to perform the following functions: Receiving AIS messages from AIS transponders/receivers through serial ports Receiving AIS messages from AIS transponders/receivers using TCP/IP protocol (e.g. through the Internet) Sending AIS messages to AIS transponders through serial ports Sending AIS messages to AIS transponders using TCP/IP protocol (e.g. through the Internet) Sending AIS messages to other AIS servers or clients using TCP/IP protocol (e.g. through the Internet) Supporting multiple TCP server/client connections Supporting multiple serial port connections Filtering AIS messages by IP addresses of clients Filtering AIS messages by MMSI numbers Filtering AIS messages by geographical coordinates (latitude/longitude) Saving AIS messages into the database or text file without any time or size limits Ability to work as a service (e.g. when a computer is rebooted AIS Server starts automatically) 3
4 Starting AIS Server To launch AIS Server, you can use a shortcut on the desktop and simply double-click onto this shortcut or choose it from the Windows Start menu. AIS Server consists of the following services (processes): COM Port service Communicates with AIS devices through a serial port. TCP/UDP Server service Receives AIS data from different sources and redistributes AIS data to different consumers through TCP or UDP protocol. This process waits for clients and serves them. TCP/UDP Client service Receives AIS data from different sources and redistributes AIS data to different consumers through TCP or UDP protocol. This process establishes connection to servers and communicates with them. Message Logger service Stores AIS messages received by COM Port service or TCP/UDP Server/Client service to the text file. VTS Server service Provides real-time AIS data to Web VTS. AIS Database service Stores AIS messages received by COM Port service or TCP/UDP Server/Client service to AIS Server database(s). 4
5 VTS Database service Generates and stores in the Web VTS database alarm events based on ship location or speed. Send safety messages. Sends virtual Aids to Navigation (AtoN) messages (only with AIS Base stations). A service is a background process executed by AIS Server. You may enable or disable services by clicking a check box in front of their names. You may edit service s settings by double-click on the service name. You may delete services by choosing the service s name and selecting Edit > Delete from the main menu. 5
6 Configuring AIS Server for communicating with ShipPlotter You must stop the AIS Server before making any changes in the configuration. To stop AIS Server, press the Stop button. After you complete your changes press the Start button to resume AIS Server s work. Receiving AIS data from ShipPlotter using UDP protocol Configure AIS Server: 1. Create a TCP/UDP Server service (select Edit > New TCP/UDP Server from the main menu). 2. Click in the Name text box and enter UDP input from ShipPlotter as the name of the service. 3. Enter 4158 in the Port text box. This port number must also be selected in ShipPlotter (see below). 4. Select UDP in the Protocol list box. 5. Uncheck the Send Messages check box to disable sending AIS messages to ShipPlotter. 6. Check the Receive Messages check box to allow receiving AIS messages from ShipPlotter. 7. Press OK to save the settings. 8. Press Start to start AIS Server. Configure ShipPlotter: 1. Open the Input / output dialog (select Options > I/O settings from the main menu). 2. Under the UDP/IP peer-to-peer output section: Check the Enable check box. 6
7 Enter in the Remote IP text box. Enter 4158 in the Remote port text box. 3. Press OK to save the settings. 4. Press Start to start ShipPlotter. 7
8 Sending AIS data to ShipPlotter using UDP protocol Configure AIS Server: 1. Create a TCP/UDP Client service (select Edit > New TCP/UDP Client from the main menu). 2. Click in the Name text box and enter UDP output to ShipPlotter as the name of the service. 3. Enter in the Host text box. 4. Enter 4159 in the Port text box. This port number must also be selected in ShipPlotter (see below). 5. Select UDP in the Protocol list box. 6. Check the Send Messages check box to allow sending AIS messages to ShipPlotter. 7. Uncheck the Receive Messages check box to disable receiving AIS messages from ShipPlotter. 8. Press OK to save the settings. 9. Press Start to start AIS Server. Configure ShipPlotter: 1. Open the Input / output dialog (select Options > I/O settings from the main menu). 2. Under the UDP/IP peer-to-peer input section: Check the enable check box. Enter 4159 in the Local port text box. 8
9 3. Press OK to save the settings. 4. Press Start to start ShipPlotter. 9
10 Sending AIS data to ShipPlotter using TCP protocol (Method 1: AIS Server is a TCP client, ShipPlotter is a TCP server) Configure AIS Server: 1. Create a TCP/UDP Client service (select Edit > New TCP/UDP Client from the main menu). 2. Click in the Name text box and enter TCP output to ShipPlotter as the name of the service. 3. Enter in the Host text box. 4. Enter 5415 in the Port text box. This port number must also be selected in ShipPlotter (see below). 5. Select TCP in the Protocol list box. 6. Check the Send Messages check box to allow sending AIS messages to ShipPlotter. 7. Uncheck the Receive Messages check box to disable receiving AIS messages from ShipPlotter. 8. Press OK to save the settings. 9. Press Start to start AIS Server. Configure ShipPlotter: 1. Open the Input / output dialog (select Options > I/O settings from the main menu). 2. Under the TCP/IP input section: Check the Server check box. Enter 5415 in the Local port text box. 10
11 3. Press OK to save the settings. 4. Press Start to start ShipPlotter. 11
12 Sending AIS data to ShipPlotter using TCP protocol (Method 2: AIS Server is a TCP server, ShipPlotter is a TCP client) Configure AIS Server: 1. Create a TCP/UDP Server service (select Edit > New TCP/UDP Server from the main menu). 2. Click in the Name text box and enter TCP server for ShipPlotter as the name of the service. 3. Enter 5419 in the Port text box. This port number must also be selected in ShipPlotter (see below). 4. Select TCP in the Protocol list box. 5. Check the Send Messages check box to allow sending AIS messages to ShipPlotter. 6. Uncheck the Receive Messages check box to disable receiving AIS messages from ShipPlotter. 7. Press OK to save the settings. 8. Press Start to start AIS Server. Configure ShipPlotter: 1. Open the Input / output dialog (select Options > I/O settings from the main menu). 2. Under the TCP/IP input section: Check the Client check box. Enter 5419 in the Remote port text box. Enter in the Remote IP text box. 12
13 3. Press OK to save the settings. 4. Press Start to start ShipPlotter. 13
14 Sending AIS data to SiiTech Web VTS service To watch your ships on SiiTech Web VTS ( or you may send your AIS data to SiiTech Web VTS service. Sending AIS data from ShipPlotter to SiiTech Web VTS (Method 1) Step 1: Configure AIS Server and ShipPlotter for sending AIS data from ShipPlotter to AIS Server. See Receiving AIS data from ShipPlotter using UDP protocol chapter for more information. Step 2: Configure AIS Server: 1. Create a TCP/UDP Client service (select Edit > New TCP/UDP Client from the main menu). 2. Click in the Name text box and enter SiiTech TCP connection as the name of the service. 3. Enter ais1.siitech.net in the Host text box. 4. Enter 9009 in the Port text box. 5. Select TCP in the Protocol list box. 6. Check the Send Messages check box to allow sending AIS messages to Web VTS service. 7. Uncheck the Receive Messages check box to disable receiving AIS messages from Web VTS service. 8. Press OK to save the settings. 9. Press Start to start AIS Server. 14
15 Sending AIS data from ShipPlotter to SiiTech Web VTS (Method 2) Configure ShipPlotter: 1. Open the Input / output dialog (select Options > I/O settings from the main menu). 2. Under the UDP/IP peer-to-peer output section: Check the first Enable check box. Enter in the first Remote IP text box. Enter 9008 in the first Remote port text box. Check the second Enable check box. Enter in the second Remote IP text box. Enter 9008 in the second Remote port text box. 3. Press OK to save the settings. 4. Press Start to start ShipPlotter. If you have any questions, please contact us at [email protected]. 15
Web VTS Installation Guide. Copyright 2006-2010 SiiTech Inc. All rights reserved.
Web VTS Installation Guide Copyright 2006-2010 SiiTech Inc. All rights reserved. Table of Contents Overview of Web VTS... 1 System Requirements... 2 Installation Sequence... 3 Installing Web VTS... 6 ii
ETHERNET WEATHER STATION CONNECTIONS Application Note 33
ETHERNET WEATHER STATION CONNECTIONS Application Note 33 With WeatherLink and a Device Server INTRODUCTION It is possible to substitute an Ethernet connection for the direct USB or serial connection that
Palomar College Dial-up Remote Access
Palomar College Dial-up Remote Access Instructions for Windows 95/98 and Windows 2000 Following are instructions to implement dialup access to the Palomar College network, email and Internet. The minimum
Windows Firewall Configuration with Group Policy for SyAM System Client Installation
with Group Policy for SyAM System Client Installation SyAM System Client can be deployed to systems on your network using SyAM Management Utilities. If Windows Firewall is enabled on target systems, it
Important Notes for WinConnect Server VS Software Installation:
Important Notes for WinConnect Server VS Software Installation: 1. Only Windows Vista Business, Windows Vista Ultimate, Windows 7 Professional, Windows 7 Ultimate, Windows Server 2008 (32-bit & 64-bit),
SMS Database System Quick Start. [Version 1.0.3]
![SMS Database System Quick Start. [Version 1.0.3]](/thumbs/27/10030198.jpg "SMS Database System Quick Start. [Version 1.0.3]")
SMS Database System Quick Start [Version 1.0.3] Warning ICP DAS Inc., LTD. assumes no liability for damages consequent to the use of this product. ICP DAS Inc., LTD. reserves the right to change this manual
Immotec Systems, Inc. SQL Server 2005 Installation Document
SQL Server Installation Guide 1. From the Visor 360 installation CD\USB Key, open the Access folder and install the Access Database Engine. 2. Open Visor 360 V2.0 folder and double click on Setup. Visor
Windows 98 Workstation Install
Windows 98 Workstation Install To install the Oracle Client Software on a Windows 98 workstation you need to do a manual install installing the Oracle Client Software first then the Infinitime software.
X Series Application Note 43:
X Series Application Note 43: Using the Remote Viewing & Web Pages of the X - Series & GR Series Recorders The Remote Viewing function of the X-Series and GR Series Recorders provide the user with the
Supervisor 10 Remote Access Users Guide Last Update: 10/27/14
1996 Lundy Ave 95131 Tel: (408) 519 2062 Fax: (408) 519 2063 Supervisor 10 Remote Access Users Guide Last Update: 10/27/14 www.anacominc.com Remote Access describes a procedure by which a user running
OSM 2007 MONITORING SOFTWARE
OSM 2007 MONITORING SOFTWARE Contents Preparation...3 Software Installation...4 Configuring OSM...6 Connecting a Device...16 Connecting to Station Monitoring Software...19 Troubleshooting...23 Installing
USER GUIDE. Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6
KRAMER ELECTRONICS LTD. USER GUIDE Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6 Contents 1 Connecting to the Kramer Device via the Ethernet Port 1 1.1 Connecting the Ethernet Port Directly
CIMHT_006 How to Configure the Database Logger Proficy HMI/SCADA CIMPLICITY
CIMHT_006 How to Configure the Database Logger Proficy HMI/SCADA CIMPLICITY Outline The Proficy HMI/SCADA CIMPLICITY product has the ability to log point data to a Microsoft SQL Database. This data can
Setting up DCOM for Windows XP. Research
Setting up DCOM for Windows XP Research 1- Setting up DCOM for Windows XP This document has been produced as a guide to configuring DCOM settings on machines with Windows XP SP2 installed. You must make
Configuring IP to Serial with Auto Answer and Serial to IP
Configuring IP to Serial with Auto Answer and Serial to IP You can configure the AirLink device to: Auto answer incoming TCP/IP or UDP/IP connections and send the packet payload out the AirLink device
Biznet GIO Cloud Connecting VM via Windows Remote Desktop
Biznet GIO Cloud Connecting VM via Windows Remote Desktop Introduction Connecting to your newly created Windows Virtual Machine (VM) via the Windows Remote Desktop client is easy but you will need to make
User Manual. Onsight Management Suite Version 5.1. Another Innovation by Librestream
User Manual Onsight Management Suite Version 5.1 Another Innovation by Librestream Doc #: 400075-06 May 2012 Information in this document is subject to change without notice. Reproduction in any manner
OPC and DCOM: 5 things you need to know Author: Randy Kondor, B.Sc. in Computer Engineering
OPC and DCOM: 5 things you need to know Author: Randy Kondor, B.Sc. in Computer Engineering OPC technology relies on Microsoft's COM and DCOM to exchange data between automation hardware and software;
MultiSite Manager. Setup Guide
MultiSite Manager Setup Guide Contents 1. Introduction... 2 How MultiSite Manager works... 2 How MultiSite Manager is implemented... 2 2. MultiSite Manager requirements... 3 Operating System requirements...
WhatsUp Event Alarm v10.x Listener Console User Guide
WhatsUp Event Alarm v10.x Listener Console User Guide Contents WhatsUp Event Alarm Listener Console Overview Firewall Considerations... 6 Using the WhatsUp Event Alarm Listener Console... 7 Event Alarm
Firewall VPN Router. Quick Installation Guide M73-APO09-380
Firewall VPN Router Quick Installation Guide M73-APO09-380 Firewall VPN Router Overview The Firewall VPN Router provides three 10/100Mbit Ethernet network interface ports which are the Internal/LAN, External/WAN,
Multi-Homing Dual WAN Firewall Router
Multi-Homing Dual WAN Firewall Router Quick Installation Guide M73-APO09-400 Multi-Homing Dual WAN Firewall Router Overview The Multi-Homing Dual WAN Firewall Router provides three 10/100Mbit Ethernet
QUANTIFY INSTALLATION GUIDE
QUANTIFY INSTALLATION GUIDE Thank you for putting your trust in Avontus! This guide reviews the process of installing Quantify software. For Quantify system requirement information, please refer to the
Purple Sturgeon Standard VPN Installation Manual for Windows XP
A. Preparations In order to install Purple Sturgeon Standard VPN you need the following details: 1. Your username 2. Your password 3. The server's IP address 4. The server's pre-shared key This information
Installation and Connection Guide to the simulation environment GLOBAL VISION
Installation and Connection Guide to the simulation environment GLOBAL VISION Hardware and Software Requirements The following hardware specification is recommended for client machines: 2 GHz Pentium class
How to Wirelessly Surf the Internet on your. Handheld via Bluetooth
How to Wirelessly Surf the Internet on your Handheld via Bluetooth For Windows XP RAS Version 1.2 February 14, 2003 Compiled By Troy Fontaine Original Instructions by Mikael Östergren (iorx) & Michael
Host Installation on a Terminal Server
TECHNICAL PAPER Host Installation on a Terminal Server Netop develops and sells software solutions that enable swift, secure and seamless transfer of video, screens, sounds and data between two or more
PIGCHAMP MOBILE. PigCHAMP Knowledge Software. Installation Guide for Mobile Units
PIGCHAMP MOBILE PigCHAMP Knowledge Software Installation Guide for Mobile Units Table of Contents: Important Note:... 4 Chapter 1: PC Setup... 5 A. Install PigCHAMP Mobile Manager on Windows XP...5 B.
Aspera Connect User Guide
Aspera Connect User Guide Mac OS X 10.4/10.5 Browser: Firefox 2+, Safari 2+ Version 2.2 Chapter 1 Chapter 2 Chapter 3 Appendix Introduction Setting Up 2.1 Installation 2.2 Configure the Network Environment
Setting up Hyper-V for 2X VirtualDesktopServer Manual
Setting up Hyper-V for 2X VirtualDesktopServer Manual URL: www.2x.com E-mail: [email protected] Information in this document is subject to change without notice. Companies, names, and data used in examples
Installing the Gerber P2C Plotter USB Driver
Installing the Gerber P2C Plotter USB Driver 1 You can install a Gerber P2C plotter using a USB connection and communicate with it using compatible design software. The following procedures describe installing
IP Interface for the Somfy Digital Network (SDN) & RS485 URTSII
IP Interface for the Somfy Digital Network (SDN) & RS485 URTSII Internet Protocol (IP) Interface Product Options Cat # 1810815 IP Interface Only Cat # 1810870: Interface and DB9/RJ45 Adapter (9015028)
Version 0.1 June 2010. Xerox WorkCentre 7120 Fax over Internet Protocol (FoIP)
Version 0.1 June 2010 Xerox WorkCentre 7120 Fax over Internet Protocol (FoIP) Thank you for choosing the Xerox WorkCentre 7120. Table of Contents Introduction.........................................
For paid computer support call 604-518-6695 http://www.netdigix.com [email protected]
Setting up your vpn connection on windows 2000 or XP in continuation from installing x.509 certificate on windows (please do not continue if you have not installed your x.509 certificate): Instructions
RUNNING TRACKER ON A TERMINAL SERVER
RUNNING TRACKER ON A TERMINAL SERVER RUNNING TRACKER ON A TERMINAL SERVER Tracker can be run on a Windows 2003 Terminal Server, provided the Windows Terminal Server is properly configured. Depending on
Application Note: Connecting to a 2500 Series Processor using PLC Workshop
Application Note: Connecting to a 2500 Series Processor using PLC Workshop This application note will describe a step by step process for the three ways to connect to a 2500-CXXX with PLC Workshop. The
Network Scanner Tool R3.1. User s Guide Version 3.0.04
Network Scanner Tool R3.1 User s Guide Version 3.0.04 Copyright 2000-2004 by Sharp Corporation. All rights reserved. Reproduction, adaptation or translation without prior written permission is prohibited,
Connecting and Setting Up Your Laptop Computer
CHAPTER 3 Connecting and Setting Up Your Laptop Computer This chapter explains how to connect your laptop to the Cisco Unified MeetingPlace system and how to set up your laptop so that you can use HyperTerminal.
USING THE XPERT2 / 9210B ON A TCP/IP NETWORK
1 USING THE XPERT2 / 9210B ON A TCP/IP NETWORK Prepared by: R&D January, 2009 Sutron Corporation 21300 Ridgetop Circle Sterling, Virginia 20166 TEL: (703) 406-2800 FAX: (703) 406-2801 WEB: http://www.sutron.com/
LOAD BALANCING 2X APPLICATIONSERVER XG SECURE CLIENT GATEWAYS THROUGH MICROSOFT NETWORK LOAD BALANCING
SECURE CLIENT GATEWAYS THROUGH MICROSOFT NETWORK LOAD BALANCING Contents Introduction... 3 Network Diagram... 3 Installing NLB... 3-4 Configuring NLB... 4-8 Configuring 2X Secure Client Gateway... 9 About
Getting Started Guide
Cove r Business-Oriented Network Management Solution Getting Started Guide (UPM 4.1) Copyright 2015 Colasoft LLC. All rights reserved. 0 UPM Activation Input the IP address of UPM server in the address
NB6 Series Quality of Service (QoS) Setup (NB6Plus4, NB6Plus4W Rev1)
NB6 Series Quality of Service (QoS) Setup (NB6Plus4, NB6Plus4W Rev1) NB6 Series and Quality of Service (QoS) The following Quality of Service (QoS) settings offer a basic setup example, setting up 3 devices
Lab 6: Wireless Networks
Lab 6: Wireless Networks EE299 Winter 2008 Due: In lab, the week of March 10-14. Objectives This lab will show a correlation among different network performance statistics with multimedia experiences,
Internet for Everyone In-Room Instructions January 2011 Version 1.3
Internet for Everyone In-Room Instructions January 2011 Version 1.3 Everywhere Internet 2006 Page 1 of 17 Connecting your computer to the Everywhere Internet network in your room 1. You need a network
LPR for Windows 95/98/Me/2000/XP TCP/IP Printing User s Guide. Rev. 03 (November, 2001)
LPR for Windows 95/98/Me/2000/XP TCP/IP Printing User s Guide Rev. 03 (November, 2001) Copyright Statement Trademarks Copyright 1997 No part of this publication may be reproduced in any form or by any
Network/Floating License Installation Instructions
Network/Floating License Installation Instructions Installation steps: On the Windows PC that will act as License Manager (SERVER): 1. Install HASP Run-time environment, SERVER 2. Plug in the red USB hardware
PartnerConnect software. Installation guide
PartnerConnect software Installation guide 2012 Welch Allyn. All rights are reserved. To support the intended use of the product described in this publication, the purchaser of the product is permitted
Windows 98 and Windows Me
Windows 98 and Windows Me This topic includes: "Preliminary Steps" on page 3-25 "Quick CD-ROM Install Steps" on page 3-26 "Other Methods of Installation" on page 3-26 "Windows 98 and Windows Me Troubleshooting"
Avigilon Control Center System Integration Guide
Avigilon Control Center System Integration Guide with STENTOFON AlphaCom INT-STENTOFON-B-Rev3 Copyright 2013 Avigilon. All rights reserved. No copying, distribution, publication, modification, or incorporation
E-Map Application CHAPTER. The E-Map Editor
CHAPTER 7 E-Map Application E-Map displays the monitoring area on an electronic map, by which the operator can easily locate the cameras, sensors and alarms triggered by motion or I/O devices. Topics discussed
Cloud Attached Storage
Using CTERA Agent in VDI mode Cloud Attached Storage November 2014 Version 4.1 Copyright 2009-2014 CTERA Networks Ltd. All rights reserved. No part of this document may be reproduced in any form or by
Studio 5.0 User s Guide
Studio 5.0 User s Guide wls-ug-administrator-20060728-05 Revised 8/8/06 ii Copyright 2006 by Wavelink Corporation All rights reserved. Wavelink Corporation 6985 South Union Park Avenue, Suite 335 Midvale,
Avigilon Control Center Server User Guide
Avigilon Control Center Server User Guide Version 4.10 PDF-SERVER-D-Rev1 Copyright 2011 Avigilon. All rights reserved. The information presented is subject to change without notice. No copying, distribution,
Network Setup Guide. Introduction. Setting up for use over LAN
Network Setup Guide This manual contains the setup information required to use the machine over wired LAN. If you use the machine with USB connection, refer to your setup sheet. Introduction To use the
MANUFACTURER RamSoft Incorporated 243 College St, Suite 100 Toronto, ON M5T 1R5 CANADA
All Information provided in this document and in the accompanying software is subject to change without notice and does not represent a commitment on the part of RamSoft. RamSoft assumes no responsibility
19 LCD / 8 CHANNEL DVR COMBO WITH 160GB HDD & 4 CAMERAS
19 LCD / 8 CHANNEL DVR COMBO WITH 160GB HDD & 4 CAMERAS Overview - Remote Viewing MODEL: SG19LD804-161 www.lorexcctv.com Copyright 2007 LOREX Technology Inc. Remote Viewing Overview Remote Viewing Overview
1. MOXA NPort Express TCP/IP to RS-232 server
GS_GSR_GCR_UserManual_App_E_MOXA_V01.doc / 17.08.2009 GeoSIG Ltd. Appendix E Page E-1 1. MOXA NPort Express TCP/IP to RS-232 server 1.1. General Explanations The NPort Express RS-232/422/485 Device server
Configuring the FAR2XX7 Series Radar for use with MaxSea Time Zero
Configuring the FAR2XX7 Series Radar for use with MaxSea Time Zero Introduction In order to operate with MaxSea Time Zero AND NavNet3D, the FAR2XX7 s processor software must be version 02.5x. If you plan
Aqua Connect Load Balancer User Manual (Mac)
Aqua Connect Load Balancer User Manual (Mac) Table of Contents About Aqua Connect Load Balancer... 3 System Requirements... 4 Hardware... 4 Software... 4 Installing the Load Balancer... 5 Configuration...
Installing NetSupport School for use with the NetSupport School Student extension for Google Chrome
Installing NetSupport School for use with the NetSupport School Student extension for Google Chrome NetSupport School delivers the tools you need to help maximise the effectiveness of computer led teaching
Changing Your Cameleon Server IP
1.1 Overview Technical Note Cameleon requires that you have a static IP address defined for the server PC the Cameleon server application runs on. Even if the server PC has a static IP address, you may
MultiSite Manager. Setup Guide
MultiSite Manager Setup Guide Contents 1. Introduction... 2 How MultiSite Manager works... 2 How MultiSite Manager is implemented... 2 2. MultiSite Manager requirements... 3 Operating System requirements...
Configuring Windows Firewall for Remote Connection in Windows XP SP2:
Configuring Windows Firewall for Remote Connection in Windows XP SP2: Follow these steps to configure the new Windows XP SP2 Firewall to allow you to connect from a remote location: Note: this should be
Setting up VMware ESXi for 2X VirtualDesktopServer Manual
Setting up VMware ESXi for 2X VirtualDesktopServer Manual URL: www.2x.com E-mail: [email protected] Information in this document is subject to change without notice. Companies, names, and data used in examples
Manager. Configuration Guide. ICS Software Solutions Clarendon House Church Lane Naphill HP14 4US Buckinghamshire
Manager Configuration Guide ICS Software Solutions Clarendon House Church Lane Naphill HP14 4US Buckinghamshire 0845 230 4275 01494 565 066 www.icssoftware.co.uk www.ics-limited.co.uk Table of Contents
3.1 RS-232/422/485 Pinout:PORT1-4(RJ-45) RJ-45 RS-232 RS-422 RS-485 PIN1 TXD PIN2 RXD PIN3 GND PIN4 PIN5 T+ 485+ PIN6 T- 485- PIN7 R+ PIN8 R-
MODEL ATC-2004 TCP/IP TO RS-232/422/485 CONVERTER User s Manual 1.1 Introduction The ATC-2004 is a 4 Port RS232/RS485 to TCP/IP converter integrated with a robust system and network management features
CPEi 800/825 Series. User Manual. * Please see the Introduction Section
CPEi 800/825 Series User Manual * Please see the Introduction Section Contents Introduction...iii Chapter 1: CPEi 800/825 User Guide Overview... 1-1 Powerful Features in a Single Unit... 1-2 Front of the
64-Bit Compatibility with Micromeritics Applications
Tech Tip 7 64-Bit Compatibility with Micromeritics Applications Micromeritics products are designed to operate in most Microsoft Windows environments. However, more current versions of Microsoft Windows,
Ethernet Interface Manual Thermal / Label Printer. Rev. 1.01 Metapace T-1. Metapace T-2 Metapace L-1 Metapace L-2
Ethernet Interface Manual Thermal / Label Printer Rev. 1.01 Metapace T-1 Metapace T-2 Metapace L-1 Metapace L-2 Table of contents 1. Interface setting Guiding...3 2. Manual Information...4 3. Interface
GE Security. FHSD Monitor / Web Server user manual
GE Security FHSD Monitor / Web Server user manual version 1-0 / november 2004 http://www.geindustrial.com/ge-interlogix/emea 2004 GE Interlogix B.V.. All rights reserved. GE Interlogix B.V. grants the
LPR for Windows 95 TCP/IP Printing User s Guide
LPR for Windows 95 TCP/IP Printing User s Guide First Edition Printed in Taiwan, R.O.C. RECYCLABLE Copyright Statement Trademarks Limited Warranty Copyright 1997 D-Link Corporation No part of this publication
Quick Connect. Overview. Client Instructions. LabTech
LabTech Quick Connect QUICK CONNECT 1 Overview... 1 Client Instructions... 1 Technician Instructions... 4 VNC... 5 RDP... 6 RAssist (Remote Assistance)... 8 IE (Internet Explorer browser)... 9 CMD... 10
Internet Setup Manual for Windows 95/98
Step 1 On your Windows 95/ 98 desktop, click on Start, then click on Settings, then click on Control Panel. Step 2 Inside of the Control Panel, find the icon labeled Network. Now double-click on the Network
Connecting your Virtual Machine to the Internet. BT Cloud Compute. The power to build your own cloud solutions to serve your specific business needs
Connecting your Virtual Machine to the Internet BT Cloud Compute The power to build your own cloud solutions to serve your specific business needs Introduction Once you have created your virtual machine
Deploying the BIG-IP LTM system and Microsoft Windows Server 2003 Terminal Services
Deployment Guide Deploying the BIG-IP System with Microsoft Windows Server 2003 Terminal Services Deploying the BIG-IP LTM system and Microsoft Windows Server 2003 Terminal Services Welcome to the BIG-IP
Network Load Balancing
Network Load Balancing Step by Step installation of Network Load Balancing in Windows Server 2008 R2. Prerequisite for NLB Cluster 1. Log on to NODE1 Windows Server 2008 R2 system with a domain account
Server Configuration. Server Configuration Settings CHAPTER
CHAPTER 2 This chapter contains information on the following topics: Settings, page 2-1 Finding a Server, page 2-4 Configuring a Server, page 2-5 Deleting a Server, page 2-6 Related Topics, page 2-8 Settings
GateHouse AIS Subscriber Proxy - Installation Guide
GateHouse A/S Lindholm Brygge 31 DK 9400 Nr. Sundby Denmark Tel: (+45) 7020 1909 Fax:(+45) 7020 1910 www.gatehouse.dk [email protected] CVR: 26040299 GateHouse AIS Subscriber Proxy - Installation Guide Revision
VPN: Installing the IPSec client
IS1505 VPN: Installing the IPSec client Page 1 of 6 VPN: Installing the IPSec client This document outlines the process for installing and configuring the IPSec client on Windows 2000, XP and Vista User
Managing Virtual Servers
CHAPTER 4 Content Switching Module Device Manager (CVDM-CSM) displays details of existing virtual servers and enables users to perform detailed tasks that include creating or deleting virtual servers,
DP-313 Wireless Print Server
DP-313 Wireless Print Server Quick Installation Guide TCP/IP Printing (LPR for Windows 95/98/Me/2000) Rev. 03 (August, 2001) Copyright Statement Trademarks Copyright 1997 No part of this publication may
Deploying Windows Streaming Media Servers NLB Cluster and metasan
Deploying Windows Streaming Media Servers NLB Cluster and metasan Introduction...................................................... 2 Objectives.......................................................
Setting up Hyper-V for 2X VirtualDesktopServer Manual
Setting up Hyper-V for 2X VirtualDesktopServer Manual URL: www.2x.com E-mail: [email protected] Information in this document is subject to change without notice. Companies, names, and data used in examples herein
Kaseya Server Instal ation User Guide June 6, 2008
Kaseya Server Installation User Guide June 6, 2008 About Kaseya Kaseya is a global provider of IT automation software for IT Solution Providers and Public and Private Sector IT organizations. Kaseya's
RSA Security Analytics
RSA Security Analytics Event Source Log Configuration Guide VMware NSX Last Modified: Friday, March 13, 2015 Event Source Product Information: Vendor: VMware Event Source: VMware NSX Version: 6.1.2 RSA
Global Monitoring + Support
Use HyperTerminal to access your Global Monitoring Units View and edit configuration settings View live data Download recorded data for use in Excel and other applications HyperTerminal is one of many
Hypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide
Hypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide Hypercom Corporation 8888 East Raintree Drive Scottsdale, Arizona 85260 USA Corporate Telephone: 480.642.5000 Corporate
Doors in a Network Environment
in a Network Environment 1.0 Purpose of this Document Doors is designed for use in stand-alone computer applications; no network functionality has been built into the program. However, with the prevalence
TRBOnet Enterprise 3.0
TRBOnet Enterprise 3.0 Installation and Configuration Guide TRBOnet Enterprise Installation and Configuration Guide 2 Contents: Architecture Overview 1 1.1. Architecture Overview 1 1.2. System Diagram
Microsoft Outlook 2000 Configuration Creation of a SPAM Filter
Microsoft Outlook 2000 Configuration Creation of a SPAM Filter This user guide aims to equip and facilitates users in creation of SPAM filtering mechanism to counter the ever increasing SPAM emails received
Setting up Citrix XenServer for 2X VirtualDesktopServer Manual
Setting up Citrix XenServer for 2X VirtualDesktopServer Manual URL: www.2x.com E-mail: [email protected] Information in this document is subject to change without notice. Companies, names, and data used in examples
1. Introduction 2. 2. What is Axis Camera Station? 3. 3. What is Viewer for Axis Camera Station? 4. 4. AXIS Camera Station Service Control 5
Table of Contents 1. Introduction 2 2. What is Axis Camera Station? 3 3. What is Viewer for Axis Camera Station? 4 4. AXIS Camera Station Service Control 5 5. Configuring Ports 7 5.1 Creating New Inbound
How to Secure a Groove Manager Web Site
How to Secure a Groove Manager Web Site Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the companies, organizations,
VRC 7900/8900 Avalanche Enabler User s Manual
VRC 7900/8900 Avalanche Enabler User s Manual WLE-VRC-20030702-02 Revised 7/2/03 ii Copyright 2003 by Wavelink Corporation All rights reserved. Wavelink Corporation 6985 South Union Park Avenue, Suite
Iridium Extreme TM Satellite Phone. Data Services Manual
Iridium Extreme TM Satellite Phone Data Services Manual Table of Contents 1 OVERVIEW... 1 2 HOW IT WORKS... 1 3 BEFORE INSTALLING... 2 4 USB DRIVER INSTALLATION... 3 5 MODEM INSTALLATION AND CONFIGURATION...
NMS300 Network Management System
NMS300 Network Management System User Manual June 2013 202-11289-01 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. After installing your device, locate
User s Manual TCP/IP TO RS-232/422/485 CONVERTER. 1.1 Introduction. 1.2 Main features. Dynamic DNS
MODEL ATC-2000 TCP/IP TO RS-232/422/485 CONVERTER User s Manual 1.1 Introduction The ATC-2000 is a RS232/RS485 to TCP/IP converter integrated with a robust system and network management features designed
Getting started with ELEPHANT Telephone Call Management System
Getting started with ELEPHANT Telephone Call Management System Revision 1.5.0 March 2005 The 116 Group Limited Telephone: 0203 371 3333 [email protected] ELEPHANT Call Management Table of Contents Introduction
DUKANE Intelligent Assembly Solutions
PC Configuration Requirements: Configuration Requirements for ipc Operation The hardware and operating system of the PC must comply with a list of minimum requirements for proper operation with the ipc