2 2012 Welch Allyn. All rights are reserved. To support the intended use of the product described in this publication, the purchaser of the product is permitted to copy this publication, for internal distribution only, from the media provided by Welch Allyn. No other use, reproduction, or distribution of this publication, or any part of it, is permitted without written permission from Welch Allyn. Welch Allyn assumes no responsibility for any injury to anyone, or for any illegal or improper use of the product, that may result from failure to use this product in accordance with the instructions, cautions, warnings, or statement of intended use published in this manual. Welch Allyn, Connex, and Spot Vital Signs and PartnerConnect are registered trademarks of Welch Allyn. Microsoft and Windows are registered trademarks of Microsoft Corporation. Software in this product is Copyright 2012 Welch Allyn or its vendors. All rights are reserved. The software is protected by United States of America copyright laws and international treaty provisions applicable worldwide. Under such laws, the licensee is entitled to use the licensed software as intended in its directions for use. The software may not be copied, decompiled, reverse-engineered, disassembled, or otherwise reduced to human perceivable form. This is not a sale of the software or any copy of the software; all right, title, and ownership of the software remain with Welch Allyn or its vendors. For information about any Welch Allyn product, call Welch Allyn Technical Support: USA Canada European Call Center Germany Latin America Singapore United Kingdom Australia China France Japan Netherlands South Africa Sweden Welch Allyn, Inc State Street Road Skaneateles Falls, NY USA Regulatory Affairs Representative Welch Allyn Limited Navan Business Park Dublin Road Navan, County Meath Republic of Ireland DIR Ver. D
3 iii Contents PartnerConnect software installation... 1 Overview... 1 Before you begin... 1 Install PartnerConnect software... 1 Troubleshooting... 5 Issue: Cannot send Ctrl+Alt+Del command to Axeda Desk Top server... 6 Disable the UAC... 7 Disable Alt+Ctrl+Del on login... 7 Issue: Unable to receive data from the Connex VM server... 7 TCP/UDP ports used... 8 Configure PartnerConnect with proxy settings Removing PartnerConnect software Remove PartnerConnect software on Windows XP Remove PartnerConnect software on Windows Vista and Windows
4 iv Contents PartnerConnect software
5 1 PartnerConnect software installation Overview Before you begin PartnerConnect software provides the following: Remote resource monitoring: This remote monitoring tool monitors your Welch Allyn Platform systems and devices. It captures operating information (excluding clinical data) and periodically sends it to Welch Allyn. Software updates: This program allows you to automatically receive updates for Welch Allyn Platform software. Remote troubleshooting: PartnerConnect allows Welch Allyn technical support to access your system, when permitted, to assist in troubleshooting. The customer is in complete control as to if and when Welch Allyn is permitted remote access via a Secure Socket Layer (SSL) connection established from the customer site (not from Welch Allyn). Ensure that this computer meets hardware and software requirements. Ensure that you have administrator rights for this computer. Ensure that you are using the console of the system on which you are installing the software. Remote connections for software installation are not supported. Close all programs before starting the installation. Install PartnerConnect software 1. Enter this URL in your web browser: The Welch Allyn PartnerConnect screen displays. 2. Click the following link: Download PartnerConnect to your desktop now! If you plan to use a proxy server, also click this link: Download Deployment Utility to configure Proxy server for PartnerConnect connectivity The File Download dialog appears. 3. Select one of the following options: Run: Starts the installation program.
6 2 PartnerConnect software installation PartnerConnect software Save: Downloads the installation program, partnerconnect.exe, to a location you choose. If you select this option, make sure the Close this dialog box when download completes checkbox is not checked and, after the download is complete, click Run. Note If the checkbox is checked, you will need to locate the installation program on your computer or network to start it. If a security warning notifies you that the publisher could not be verified, confirm that you want to run the installation program. The Welcome screen appears. 4. Click Next. The License Agreement screen appears. 5. Accept the license and click Next. Note If you are performing an update to your software, this is the final step in the update process. If you are performing a new install, the Site Information screen appears. 6. Enter information as shown in the next table. The table and the documentation of the product for which you are installing PartnerConnect explain where to find the information. Note This information allows Welch Allyn to quickly and efficiently locate this system for remote connection. Field Customer Serial Number* Organization/Facility Name* Description Enter the serial number. For information about locating the serial number, see your product documentation. Enter the organization (customer) name followed by its city and state. For example, ABC Hospital
7 Installation guide PartnerConnect software installation 3 Location/Department Name* System-New York NY. For more information, see your product documentation. Enter the location code from HIS. For example, 3NW, ER, 7NTower. This code should match the code provided to your product software. If the location is not defined, create a unique location code. If the following locations are not defined, use the following codes: DATACENTER: Use this for the data center, computer room, or server room. Address 1 and 2 City State Region* Country* BioMed: Use this for the Biomedical department. Enter the street address or post office box. Enter the city of the organization location. Enter the state or province of the organization location. Select a region that matches your location from the pull-down list. Enter the country of the organization location. 7. Click Next. * Required field The Setup program displays the settings you selected, providing an opportunity to ensure that the settings are correct before proceeding. 8. Click Next. Setup copies and installs the files you selected. Setup then prompts you to specify post-install tasks. 9. Select Install the Axeda Desktop Server. This allows Welch Allyn to remotely access your system only upon your request to assist in troubleshooting. If you check this box, the Axeda Desktop Server installs immediately after you exit this Setup program. 10. Click Next. Setup verifies a successful installation. 11. Click Finish. If you did not grant permission for remote access, you are now finished. If you selected Install the Axeda Desktop Server, the remote troubleshooting option begins its installation by displaying an Introduction screen immediately after you click Finish. 12. Click Next. The License Agreement screen appears. 13. Accept the license and click Next. The Choose Install Folder screen appears. 14. Identify where you want the installation program to install the Axeda Desktop server software and click Next.
8 4 PartnerConnect software installation PartnerConnect software The Service screen appears. 15. Check to install as a service and click Next. 16. Check to start as a service and click Next. 17. Enter a name for the service (the default is Axeda Desktop Server) and click Next. The program displays the settings you selected, providing an opportunity to ensure that these are the settings you want. 18. Click Install. The program installs the server. This may take several minutes. The program displays a message verifying a successful installation. 19. Click Done.
9 5 Troubleshooting This section contains information that you can use to resolve problems encountered during installation. Note Prior to completing troubleshooting tips presented in this section, reboot your computer, and then verify that the issue still exists.
10 6 Troubleshooting PartnerConnect software Issue: Cannot send Ctrl+Alt+Del command to Axeda Desk Top server If the client cannot send a Ctrl+Alt+Del command to the Axeda Desk Top server after installing on a Windows 7 operating system, change the configuration using one of the following methods. Change the domain group policy setting. Change the local group policy setting. The next sections explain how. Change the domain group policy setting If the remote computer is connected to a domain, enable this group policy setting for subdomains or for the entire domain: Note Note Only a domain administrator can modify the domain group policy. The domain group policy overrides the local group policy. If the domain group policy is not set, you can use local group policy setting mentioned in the next section. 1. Log in to the remote computer as the domain administrator. 2. Click the Start button, select Run, type gpmc.msc and click OK. 3. In the left section, select the desired domain, then right-click and choose Create a GPO in this domain, and link it here. 4. Right-click the new GPO and select Edit. 5. In the left section, navigate to Computer Configuration > Administrative Templates > Windows Components > Windows Logon Options. 6. In the right section, double-click the Disable or enable software Secure Attention Sequence policy and click Enabled. 7. Set the policy option to Services. 8. Click OK and close the Group Policy Object Editor. Sending Ctrl+Alt+Del on all computers connected to the domain selected in step 3 is now enabled. Change the local group policy setting If the remote computer is a member of a workgroup or is connected to a domain with no domain group policy set, follow these steps: 1. Log in to the remote computer as a local or domain administrator. 2. Click the Start button, select Run, type gpedit.msc and press Enter. 3. In the left section, navigate to Computer Configuration > Administrative Templates > Windows Components > Windows Logon Options. 4. In the right section, double-click the Disable or enable software Secure Attention Sequence policy and click Enabled. 5. Set the policy option to either Services or Services and Ease of Access applications. 6. Click OK and close the Group Policy Object editor. Sending Ctrl+Alt+Del on the remote computer is now enabled.
11 Installation guide Troubleshooting 7 Disable the UAC 1. Click the Start button, and then select Run. The Run dialog appears. 2. Type msconfig and press Enter. The System Configuration Utility dialog appears. 3. Click the Tools tab. 4. Locate and highlight Disable UAP or Disable UAC, and then click the Launch button. A command prompt window appears and runs the processes that disable UAC. 5. Close command prompt window. 6. Close the System Configuration Utility dialog. 7. Restart computer for the change to take effect. Disable Alt+Ctrl+Del on login 1. Go to the Control Panel, and select System and Maintenance. 2. Click Administrative Tools then the Local Security Policy. The Local Security Settings window appears. 3. Select Computer Configuration > Windows Settings > Security Settings > Local Policies > Security Options. Security options appear in the details pane. 4. Locate and double-click Interactive Logon: Do not require CTRL +ALT +DEL. The setting's dialog appears. 5. Click Disabled, and then click OK. 6. Restart computer for the change to take effect. When logging in, the logon screen will automatically appear without pressing Ctrl+Alt+Del. Users must still provide a name and password. Issue: Unable to receive data from the Connex VM server If the client cannot receive data from the Connex VM server after installing, traffic from the server may be blocked. Change the firewall rule to allow communication through port for the following: Server name IP address Required ports Optional ports Location ghsom1.axeda.com , , Waltham ghuk1.axeda.com , , London ghjap1.axeda.com , , Tokyo ghsj1.axeda.com , , San Jose
12 8 Troubleshooting PartnerConnect software Server name IP address Required ports Optional ports Location gas-de1.axeda.com , , Frankfurt gas-hk3.axeda.com , , Hong Kong gas-aus.axeda.com , , Sydney gas-sj4.axeda.com , , San Jose gas-bo4.axeda.com , , Waltham gas-bo5.axeda.com , , Waltham gas-bo6.axeda.com , , Waltham Note If you need IP addresses, contact your IT network person to resolve the DNS names to an IP address, based on your current and local settings. For additional diagnostic information, go to the following URL: After logging in, this screen appears: TCP/UDP ports used The following table lists the port assignments used by the Welch Allyn PartnerConnect solution. After installation, you can use this information to configure the firewalls, virus software, and router access lists for your facility.
15 11 Configure PartnerConnect with proxy settings If you use a proxy server for your external Web connections, complete the following steps. 1. Install the Axeda Deployment Utility by entering the following at a command prompt: deployment.exe This program is in the folder where PartnerConnect resides. 2. Launch the Axeda Deployment Utility by selecting the following: Start> All Programs> Axeda> Deployment> Axeda_Deployment The Axeda Deployment Utility dialog appears. 3. Select how to connect to the agent: This dialog box specifies how to connect the deployment utility to the running agent. You must connect the utility to the agent to retrieve and modify device settings. Agent is installed on this computer: Select this option if the deployment utility is installed on the same computer as the agent.
16 12 Configure PartnerConnect with proxy settings PartnerConnect software Agent is installed on networked computer: Select this option if the agent device is on the same local network as the deployment utility computer. If you select this option, type or select the host name or IP address of the agent device. The Host field accepts IPv4 and IPv6 addresses as well as alphanumeric characters for a machine name. Agent is connected via serial cable: Select this option if the agent device is connected to the deployment utility computer by a serial cable. If you select this option, type or select the serial COM port. 4. Click OK to connect to the agent. 5. Click Enterprise Servers in the left pane, then select the Proxy Servers tab. 6. Select the appropriate proxy setting for the site. Enable Proxy Auto-Configuration: The agent communicates directly with the enterprise server; it does not go through a proxy server. Enable HTTP Proxy: The script identifies the HTTP proxy server IP address and port. Enable SOCKS Proxy: The script identifies the SOCKS proxy server IP address and port. 7. Save the settings to the agent. After you add or edit settings using the deployment utility, you must send the changed settings information to the agent and restart the agent. a. Click Deploy Changes to Agent.
17 Installation guide Configure PartnerConnect with proxy settings 13 If any required information is missing (for example, model and serial information), you are prompted to configure that information before deploying changed settings. In addition, any missing settings appear in the Configuration window below the associated settings window name. To configure it, click the name of the missing setting. b. When prompted to send configuration settings to the agent, click Yes.
18 14 Configure PartnerConnect with proxy settings PartnerConnect software
19 15 Removing PartnerConnect software Remove PartnerConnect software on Windows XP 1. Select Start> Settings> Control Panel. The Control Panel appears. 2. Select Add or Remove Programs and make sure that Change or Remove Programs is selected in the left pane. Windows lists the programs on this computer. 3. Scroll to the following Welch Allyn programs: 4. Remove the programs, starting with PartnerConnect (listed in Add/Remove Programs as Welch Allyn RSDS). For each program: a. Select the program. The program listing expands to display additional information and a Change/Remove button. b. Select Change/Remove. Windows launches the uninstall program. c. Follow the prompts to remove the program. Accept the default values on the following screen.
20 16 Removing PartnerConnect software PartnerConnect software Axeda Desktop Server uninstall program will prompt you to reboot the computer. You can reboot at a later time, but you must reboot to finish the uninstall. 5. Verify that the programs you deleted are removed: a. Reboot the computer. b. Select Start> Settings> Control Panel. The Control Panel appears. c. Select Add or Remove Programs. Windows lists the programs on this computer. d. Visually inspect to make sure that the programs you deleted no longer appear in the list of programs. If the programs are not in the program list, the PartnerConnect program is now removed from your computer. If the programs still appear in the program list, contact your IT department or workstation support and ask if there is anything on the network that prevents program removal. To verify that the programs you deleted are removed: 1. Navigate to the uninstall screen. Windows lists the programs on this computer. 2. Visually inspect to make sure that the programs you deleted no longer appear in the list of programs. If the programs are not in the program list, the PartnerConnect and Axeda Desktop Server programs are now removed from your computer. If the programs still appear in the program list, contact your IT department or workstation support and ask if there is anything on the network that prevents program removal. In certain situations, programs external to Welch Allyn software may block uninstallation. If this is a possibility in your IT environment, contact your IT department to verify whether additional steps are required.
21 Installation guide Removing PartnerConnect software 17 Remove PartnerConnect software on Windows Vista and Windows 7 1. Select >Control Panel. The Control Panel appears. 2. Select Uninstall a program in the Programs section. Windows lists the programs on this computer. 3. Scroll to the following Welch Allyn programs. 4. Remove the programs, starting with PartnerConnect (listed in Add/Remove Programs as Welch Allyn RSDS). For each program: a. Select the program. b. Click the uninstall option. Windows launches the uninstall program. c. Follow the prompts to remove the program.
22 18 Removing PartnerConnect software PartnerConnect software Note Accept the default values on the following screen: The Axeda Desktop Server uninstall program will prompt you to reboot the computer. You can reboot at a later time, but you must reboot to complete the uninstall. To verify that the programs you deleted are removed: 1. Navigate to the uninstall screen. Windows lists the programs on this computer. 2. Visually inspect to make sure that the programs you deleted no longer appear in the list of programs. If the programs are not in the program list, the PartnerConnect and Axeda Desktop Server programs are now removed from your computer. If the programs still appear in the program list, contact your IT department or workstation support and ask if there is anything on the network that prevents program removal. In certain situations, programs external to Welch Allyn software may block uninstallation. If this is a possibility in your IT environment, contact your IT department to verify whether additional steps are required.
Welch Allyn Virtual Channel Client (VCC) Installation guide Software version 1.1X ii Welch Allyn VCC software 2013 Welch Allyn. All rights are reserved. To support the intended use of the product described
Welch Allyn Connex VM data management system Directions for use 2011 Welch Allyn. All rights are reserved. To support the intended use of the product described in this publication, the purchaser of the
CardioPerfect Webstation 1.0 Installing the Webstation Directions for Use Welch Allyn 4341 State Street Road Skaneateles Falls, NY 13153-0220 USA www.welchallyn.com Welch Allyn CardioPerfect Webstation
Installation Guide CardioPerfect Webstation 2.0 CardioPerfect Webstation Installation Guide Welch Allyn 4341 State Street Road Skaneateles Falls, NY 13153-0220 USA www.welchallyn.com European Regulatory
AcuityLink Clinician Notifier Software installation instructions Software version 1.5x ii Welch Allyn AcuityLink Clinician Notifier 2013 Welch Allyn. All rights are reserved. To support the intended use
User Manual Onsight Management Suite Version 5.1 Another Innovation by Librestream Doc #: 400075-06 May 2012 Information in this document is subject to change without notice. Reproduction in any manner
Welch Allyn PCH100 and PCH200 Installation Guide Copyright 2006-2013 Welch Allyn. All rights are reserved. No one is permitted to reproduce or duplicate, in any form, this manual or any part thereof without
. All right reserved. For more information about Specops Deploy and other Specops products, visit www.specopssoft.com Copyright and Trademarks Specops Deploy is a trademark owned by Specops Software. All
Technical Brief for Windows Home Server Remote Access Microsoft Corporation Published: October, 2008 Version: 1.1 Abstract This Technical Brief provides an in-depth look at the features and functionality
ez Agent Administrator s Guide Copyright This document is protected by the United States copyright laws, and is proprietary to Zscaler Inc. Copying, reproducing, integrating, translating, modifying, enhancing,
Installation Instruction STATISTICA Enterprise Small Business Notes: ❶ The installation of STATISTICA Enterprise Small Business entails two parts: a) a server installation, and b) workstation installations
Connection and Printer Setup Guide For connection issues, see the following sections of this document: "Connection Requirements" on page 1 "Log on" on page 2 "Troubleshooting Your Connection" on page 4
Dell Statistica 13.0 2015 Dell Inc. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright. The software described in this guide is furnished under a software license or
STATISTICA VERSION 12 STATISTICA ENTERPRISE SMALL BUSINESS INSTALLATION INSTRUCTIONS Notes 1. The installation of STATISTICA Enterprise Small Business entails two parts: a) a server installation, and b)
Setting Up SSL on IIS6 for MEGA Advisor Revised: July 5, 2012 Created: February 1, 2008 Author: Melinda BODROGI CONTENTS Contents... 2 Principle... 3 Requirements... 4 Install the certification authority
Notes: STATISTICA VERSION 10 STATISTICA ENTERPRISE SERVER INSTALLATION INSTRUCTIONS 1. The installation of the STATISTICA Enterprise Server entails two parts: a) a server installation, and b) workstation
MailStore Outlook Add-in Deployment A MailStore Server installation deploys the MailStore Outlook Add-in as a Windows Installer package (MSI) that can be installed on client machines using software distribution.
Important Notes for WinConnect Server VS Software Installation: 1. Only Windows Vista Business, Windows Vista Ultimate, Windows 7 Professional, Windows 7 Ultimate, Windows Server 2008 (32-bit & 64-bit),
Nexio Connectus with Nexio G-Scribe 2.1.2 3/20/2014 Edition: A 2.1.2 Publication Information 2014 Imagine Communications. Proprietary and Confidential. Imagine Communications considers this document and
Wavecrest InstallationGuide Wavecrest Certificate www.wavecrest.net Copyright Copyright 1996-2015, Wavecrest Computing, Inc. All rights reserved. Use of this product and this manual is subject to license.
ACTIVE DIRECTORY DEPLOYMENT CASAS Technical Support 800.255.1036 2009 Comprehensive Adult Student Assessment Systems. All rights reserved. Version 031809 CONTENTS 1. INTRODUCTION... 1 1.1 LAN PREREQUISITES...
OUTLOOK ADDIN V1.5 ABOUT THE ADDIN The SpamTitan Outlook Addin v1.5 allows reporting of SPAM and HAM messages to the SpamTitan appliance, these messages are then examined by the SpamTitan Bayesian filter
Setting Up a Unisphere Management Station for the VNX Series P/N 300-011-796 Revision A01 January 5, 2010 This document describes the different types of Unisphere management stations and tells how to install
Core Protection for Virtual Machines 1 Comprehensive Threat Protection for Virtual Environments. Installation Guide e Endpoint Security Trend Micro Incorporated reserves the right to make changes to this
DC Agent Troubleshooting Topic 50320 DC Agent Troubleshooting Web Security Solutions v7.7.x, 7.8.x 27-Mar-2013 This collection includes the following articles to help you troubleshoot DC Agent installation
Vermont Oxford Network enicq 5 Documentation enicq 5 System Administrator s Guide Release 2.0 Published November 2014 2014 Vermont Oxford Network. All Rights Reserved. enicq 5 System Administrator s Guide
Introduction EASYLABEL 6 has several new features for saving the history of label formats. This history can include information about when label formats were edited and printed. In order to save this history,
Quickstart Guide First Edition, Published September 2009 Remote Administrator / NOD32 Antivirus 4 Business Edition Contents Getting started...1 Software components...1 Section 1: Purchasing and downloading
DameWare Server Administrator Guide About DameWare Contact Information Team Contact Information Sales 1.866.270.1449 General Support Technical Support Customer Service User Forums http://www.dameware.com/customers.aspx
WEBCONNECT INSTALLATION GUIDE Version 1.96 Copyright 1981-2015 Netop Business Solutions A/S. All Rights Reserved. Portions used under license from third parties. Please send any comments to: Netop Business
Installing and Configuring vcloud Connector vcloud Connector 2.7.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new
Notes: STATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER 1. These instructions focus on installation on Windows Terminal Server (WTS), but are applicable
WavecrestCyBlock Client Version 2.1.13 Web-Access Security Solution UserGuide www.wavecrest.net Copyright Copyright 1996-2014, Wavecrest Computing, Inc. All rights reserved. Use of this product and this
Setup and Configuration Guide for Pathways Mobile Estimating Setup and Configuration Guide for Pathways Mobile Estimating Copyright 2008 by CCC Information Services Inc. All rights reserved. No part of
Policy Patrol 3.0 technical documentation July 23, 2004 Installing Policy Patrol on a separate machine If you have Microsoft Exchange Server 2000 or 2003 it is recommended to install Policy Patrol on the
Installation Instruction STATISTICA Concurrent Network License with Borrowing Domain Based Registration Notes: ❶ The installation of the Concurrent network version entails two parts: a) a server installation,
MadCap Software Installation Guide for Pulse on Windows Server 2012 Pulse Copyright 2014 MadCap Software. All rights reserved. Information in this document is subject to change without notice. The software
Installing and Configuring vcenter Support Assistant vcenter Support Assistant 5.5 This document supports the version of each product listed and supports all subsequent versions until the document is replaced
Sophos for Microsoft SharePoint startup guide Product version: 2.0 Document date: March 2011 Contents 1 About this guide...3 2 About Sophos for Microsoft SharePoint...3 3 System requirements...3 4 Planning
Metasys System Direct Connection and Dial-Up Connection Application Note Code No. LIT-1201639 Software Release 5.1 Issued August 27, 2013 Supersedes October 4 2010 Refer to the QuickLIT website for the
SpamTitan Outlook Addin V2.0 The SpamTitan Outlook Addin v2.0 allows users to do a varity of spam filtering management from the outlook client, including Report Spam and Ham messages to the SpamTitan Bayesian
Scan to SMB(PC) Set up Guide Regarding Trade Names Windows is a registered trademark of Microsoft Corporation in the U.S.A. and/or other countries. Windows XP and Windows Vista are trademarks of Microsoft
HELP DOCUMENTATION E-SSOM DEPLOYMENT GUIDE Copyright 1998-2013 Tools4ever B.V. All rights reserved. No part of the contents of this user guide may be reproduced or transmitted in any form or by any means
1. Set Daylight Savings Time... 3 a. Have client log into Novell/Local Machine with Administrator Account...3 b. Access Adjust Date/Time...3 c. Make sure the time zone is set to Central Time...3 2. Create
Operating System Troubleshooting File and Printer Sharing in Microsoft Windows XP Microsoft Corporation Published: November 2003 Updated: August 2004 Abstract File and printer sharing for Microsoft Windows
data analysis data mining quality improvement web-based analytics Notes STATISTICA VERSION 11 CONCURRENT NETWORK LICENSE WITH BORROWING INSTALLATION INSTRUCTIONS 1. The installation of the Concurrent network
Remote Console Installation & Setup Guide November 2009 Legal Information All rights reserved. No part of this document shall be reproduced or transmitted by any means or otherwise, without written permission
NSi Mobile Installation Guide Version 6.2 Revision History Version Date 1.0 October 2, 2012 2.0 September 18, 2013 2 CONTENTS TABLE OF CONTENTS PREFACE... 5 Purpose of this Document... 5 Version Compatibility...
Global VPN Client Getting Started Guide 1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your system. CAUTION: A CAUTION indicates potential
DX8100 Series Symantec AntiVirus Corporate Edition Installation Instructions Version 10.1.6 DX8100 DX8100 Digital Video Recorder C2643M (4/08) Contents Description...........................................................................................................
Magaya Software Installation Guide MAGAYA SOFTWARE INSTALLATION GUIDE INTRODUCTION Introduction This installation guide explains the system requirements for installing any Magaya software, the steps to
FileMaker Server 15 Getting Started Guide 2007 2016 FileMaker, Inc. All Rights Reserved. FileMaker, Inc. 5201 Patrick Henry Drive Santa Clara, California 95054 FileMaker and FileMaker Go are trademarks
StarWind SMI-S Agent: Storage Provider for SCVMM April 2012 TRADEMARKS StarWind, StarWind Software, and the StarWind and StarWind Software logos are trademarks of StarWind Software that may be registered
Securing Windows 7 8/23/2011 Table of Contents About this lab... 3 About the Laboratory Environment... 4 Lab 1: Restricting Users... 5 Exercise 1. Verify the default rights of users... 5 Exercise 2. Adding
Network Setup Guide This manual contains the setup information required to use the machine over wired LAN. If you use the machine with USB connection, refer to your setup sheet. Introduction To use the
MGC WebCommander Web Server Manager Installation and Configuration Guide Version 8.0 Copyright 2006 Polycom, Inc. All Rights Reserved Catalog No. DOC2138B Version 8.0 Proprietary and Confidential The information
Getting Started Guide Maximizer is a contact manager designed to help individuals, home offices, and small businesses succeed by helping them maximize their time, create satisfied customers, and increase
FileMaker Server 14 FileMaker Server Help 2007 2015 FileMaker, Inc. All Rights Reserved. FileMaker, Inc. 5201 Patrick Henry Drive Santa Clara, California 95054 FileMaker and FileMaker Go are trademarks
Network Scanner Tool R3.1 User s Guide Version 3.0.04 Copyright 2000-2004 by Sharp Corporation. All rights reserved. Reproduction, adaptation or translation without prior written permission is prohibited,
Sophos Anti-Virus for NetApp Storage Systems startup guide Runs on Windows 2000 and later Product version: 1 Document date: April 2012 Contents 1 About this guide...3 2 About Sophos Anti-Virus for NetApp
Webroot Web Security Service Desktop Web Proxy Configuration Guide Webroot Software, Inc. 385 Interlocken Crescent Suite 800 Broomfield, CO 80021 www.webroot.com Desktop Web Proxy Configuration Guide September
KRAMER ELECTRONICS LTD. USER GUIDE Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6 Contents 1 Connecting to the Kramer Device via the Ethernet Port 1 1.1 Connecting the Ethernet Port Directly
Installing and Configuring vcenter Multi-Hypervisor Manager vcenter Server 5.1 vcenter Multi-Hypervisor Manager 1.1 This document supports the version of each product listed and supports all subsequent
Quick Install Guide Lumension Endpoint Management and Security Suite 7.1 Lumension Endpoint Management and Security Suite - 2 - Notices Version Information Lumension Endpoint Management and Security Suite
USER GUIDE WEB-BASED SYSTEM CONTROL APPLICATION Publication: 81-9059-0703-0, Rev. C www.pesa.com Phone: 256.726.9200 Thank You for Choosing PESA!! We appreciate your confidence in our products. PESA produces
Astaro Security Gateway V8 Remote Access via L2TP over IPSec Configuring ASG and Client 1. Introduction This guide contains complementary information on the Administration Guide and the Online Help. If
MadCap Software Installation Guide for Pulse on Windows Server 2008R2 Pulse Copyright 2014 MadCap Software. All rights reserved. Information in this document is subject to change without notice. The software
StruxureWare Power Monitoring 7.0.1 Installation Guide 7EN02-0308-01 07/2012 Contents Safety information 5 Introduction 7 Summary of topics in this guide 7 Supported operating systems and SQL Server editions
with Group Policy for SyAM System Client Installation SyAM System Client can be deployed to systems on your network using SyAM Management Utilities. If Windows Firewall is enabled on target systems, it
2X SecureRemoteDesktop Version 1.1 Website: www.2x.com Email: firstname.lastname@example.org Information in this document is subject to change without notice. Companies, names, and data used in examples herein are fictitious
Getting Started with Vision 6 Version 6.9 Notice Copyright 1981-2009 Netop Business Solutions A/S. All Rights Reserved. Portions used under license from third parties. Please send any comments to: Netop
Windows Server Update Services 3.0 SP2 Step By Step Guide Microsoft Corporation Author: Anita Taylor Editor: Theresa Haynie Abstract This guide provides detailed instructions for installing Windows Server
Dell Statistica Document Management System (SDMS) Installation Instructions 2015 Dell Inc. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright. The software described
Avaya one X Portal 1.1.3 Lightweight Directory Access Protocol (LDAP) over Secure Socket Layer (SSL) Configuration This document provides configuration steps for Avaya one X Portal s 1.1.3 communication
Radio configuration guide Connex Vital Signs Monitor 6000 Series and Connex Integrated Wall System Overview This guide explains the following: Accessing the radio software upgrade files. Creating a simple
Metalogix SharePoint Backup Publication Date: August 24, 2015 All Rights Reserved. This software is protected by copyright law and international treaties. Unauthorized reproduction or distribution of this
Dell SupportAssist Version 2.0 for Dell OpenManage Essentials Quick Start Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer.