Genium INET. Trading Workstation Installation Guide. Nasdaq Nordic. Version:

Transcription

1 Genium INET Trading Workstation Installation Guide Nasdaq Nordic Version:

2 Document ID: Documentation Release: Release Date: Publication Date: TW_IG_6 GENIUM_Product_a Genium, INET, ITCH, CONDICO, EXIGO, and TradeGuard are registered trademarks of Nasdaq, Inc. X-stream Trading, OUCH, ICS-II, SWIFT Gateway, Genium Market Info (GMI), Appmind, PRM, PTRM, MiQ, SMARTS, X-stream CSD, Genium Risk Manager (GRM), TIP, CLICK, CLICK XT, and SECUR are trademarks of Nasdaq, Inc. Whilst all reasonable care has been taken to ensure that the details are true and not misleading at the time of publication, no liability whatsoever is assumed by Nasdaq, Inc., or any subsidiary of Nasdaq, Inc., with respect to the accuracy or any use of the information provided herein. Any license, delivery and support of software systems etc. require entering into separate agreements with Nasdaq, Inc. This document contains confidential information and may not be modified or reproduced, in whole or in part, or transmitted in any form to any third party, without the written approval from Nasdaq, Inc. Copyright 2016 Nasdaq, Inc. All rights reserved.

3 Table of Contents Table of Contents 1 Summary of Changes About this Manual References Prerequisites Hardware Requirements Software Requirements Settings and Referenced Data OMnet Account Installation Installing Trading Workstation Logging On...15 List of Tables Table 1: OMnet Account...10 List of Figures Figure 1: Welcome Window...11 Figure 2: Select Installation Folder Window...12 Figure 3: Older or Newer Version Exists in the Same Directory...13 Figure 4: Confirm Installation Window...13 Figure 5: Installation Complete Window...14 Figure 6: Log-On Window...15 Nasdaq, Inc (16)

4 Trading Workstation Installation Guide 4(16) Nasdaq, Inc. 2016

5 Summary of Changes 1 Summary of Changes Changes between this version and version a1726 ( ). No 1 Changes Published with new code track on front page. Comment Nasdaq, Inc (16)

6 Trading Workstation Installation Guide 6(16) Nasdaq, Inc. 2016

7 About this Manual 2 About this Manual The Genium INET Trading Workstation is part of Genium INET and is used by the members of the trading organization. This document describes how to manage the installation and related actions of all the components of the Genium INET Trading Workstation. 2.1 References For more information, please refer to the following document: Trading Workstation (TW) User's Guide Nasdaq, Inc (16)

8 Trading Workstation Installation Guide 8(16) Nasdaq, Inc. 2016

9 Prerequisites 3 Prerequisites In order to work with this application, you need the following: a PC that is equipped with hardware and software according to Genium INET requirements an OMnet account to be able to log in to the application a TCP/IP connection to the OMnet gateway machine the right to install the program (check with your system administrator). 3.1 Hardware Requirements The list below presents the minimum recommended hardware requirements: Intel Core i3 4 GB RAM 3 GB free hard disk space Note: The above requirements are valid for the current release. They may change with later releases. 3.2 Software Requirements The list below presents the software requirements: Windows 7 64-bit with Service Pack 1.NET Framework Settings and Referenced Data Settings and reference data are stored in: APPDATA=C:\Users\[Windows User]\AppData\Roaming Live data are stored in LOCALAPPDATA=C:\Users\[Windows User]\AppData\Local LOCALAPPDATA should not be redirected to a share or similar. 3.4 OMnet Account Nasdaq creates an account for every Trading Workstation license. You need (and should have received) information for every license. This information is listed in the table below. Nasdaq, Inc (16)

10 Trading Workstation Installation Guide Table 1: OMnet Account Item User name Password Node Port Description TESTUSER1, for example. PASSWORD, for example. The network gateway to which you are connected. The TCP/IP port number of the gateway process. If you cannot log in to the application, check that: your workstation is set up at the central marketplace as a valid OMnet node. you are set up as a user with a valid log-in name and password. the application is configured to connect to a valid OMnet gateway and socket. If you still cannot log in, contact your system administrator. 10(16) Nasdaq, Inc. 2016

11 Installation 4 Installation This chapter assumes that you have logged in to Windows. 4.1 Installing Trading Workstation The following chapter will describe how to install Trading Workstation the first time: 1. Start the installation by running the applicable installation program for Trading Workstation. The following window is displayed: Figure 1: Welcome Window 2. Click Next. The following window is displayed: Nasdaq, Inc (16)

12 Trading Workstation Installation Guide Figure 2: Select Installation Folder Window The installation program suggests an installation folder for the program. If you do not wish to use this folder, click Browse and select another installation folder. Click Disk Cost to get an overview of available local drives to use for the installation and to see if there is enough space for the application. Set application restrictions, that is, if Everyone or only you (Just Me) working with this computer should be able to run the application. If an older or newer version of the Trading Workstation application is already installed in the selected folder, the following warning message will appear: 12(16) Nasdaq, Inc. 2016

13 Installation Figure 3: Older or Newer Version Exists in the Same Directory If you want to uninstall the existing version, click Yes. If not, click No and select a different directory. 3. Continue by clicking Next. The following window appears: Figure 4: Confirm Installation Window This is the last window before the actual installation begins. Nasdaq, Inc (16)

14 Trading Workstation Installation Guide If you want to change any of the settings, click Back. Otherwise, proceed to the next step. 4. Install the application by clicking Next. The installation takes a few seconds. When the installation is complete, the following window appears: Figure 5: Installation Complete Window 5. Click Close to close the window. 14(16) Nasdaq, Inc. 2016

15 Logging On 5 Logging On Follow the procedure below to test for the successful installation of the application. 1. Start the application by selecting Start, All Programs, NASDAQ, Genium INET Trading Workstation <version>. The Trading Workstation window opens (disabled) and the following log-on window is displayed: Figure 6: Log-On Window 2. Enter your username and password in the appropriate fields. You can select the appropriate username in the Username list. 3. Press ENTER or click Log on when you have entered all information in the dialog. A message box is displayed and the system starts downloading data, such as your own orders and all instruments for trading. Note: When you have become more accustomed to Trading Workstation, you may start opening windows and positioning them before the download is finished. When the download has finished, all windows are enabled and you can start trading. When you want to exit the application, select Exit from the File menu. Nasdaq, Inc (16)

16 Trading Workstation Installation Guide 16(16) Nasdaq, Inc. 2016