TYPE APPROVAL CERTIFICATE

Transcription

1 DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E This is to certify that the Electric Motor with type designation(s) RN series 56 up to 315L Manufactured by Rotor B.V. EIBERGEN, Netherlands is found to comply with Det Norske Veritas' Rules for Classification of Ships, High Speed & Light Craft and Det Norske Veritas' Offshore Standards Application For installation in non hazardous area. Enclosure class IP55 - IP56 Insulation class F Temp. class ( C) 155 Voltage (V) Power (kw) 0,09(0,07) - 315(353) Frequency (Hz) Speed (RPM) This Certificate is valid until Issued at Høvik on DNV local station: Rotterdam for Det Norske Veritas AS Approval Engineer: Nicolay Horn Marit Laumann Head of Section This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed. If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf of Det Norske Veritas. Form No.: TA 1411a Issue: December 2012 Page 1 of 5

2 Product description Type RN & 6 RN 3-phase induction motor: Rated Voltage: Rated Frequency: Number of poles: Duty type: Enclosure class: Cooling Ambient air temp.: Material: Ex rating: Insulation class: 200V up to 760V 50Hz, 60Hz 2, 4, 6, 8 and combinations. S1, S2 IP55 and IP56 IC411, IC410, IC416, IC deg. C Cast iron NA F or H Product data RN, 50/60 Hz Frame Sizes Type No of poles 56 RN56M RN63M02K RN63M RN71M02K RN71M RN80M02K RN80M S RN90S L RN90L L 6RN100L M 6RN112M S 6RN132S02K S 6RN132S M 6RN160M02K M 6RN160M L 6RN160L M 6RN180M L 6RN200L02A L 6RN200L02A M 6RN225M02A M 6RN250M02B S 6RN280S02B M 6RN280M02B S 6RN315S02B M 6RN315M02B L 6RN315L02B L 6RN315L02B L 6RN315L02B L 6RN315L02A RN56M RN63M04K RN63M RN71M04K RN71M RN80M04K RN80M S RN90S L RN90L L RN 100L04K Form No.: TA 1411a Issue: December 2012 Page 2 of 5

3 Frame Sizes Type No of poles 100L 6RN 100L M 6RN 112M S 6RN 132S M 6RN 132M M 6RN 160M L 6RN 160L M 6RN 180M04A L 6RN 180L04A L 6RN 200L04A S 6RN 225S04A M 6RN 225M04A M 6RN 250M04A S 6RN 280S04A M 6RN 280M04A S 6RN 315S04A M 6RN 315M04A L 6RN 315L04A L 6RN 315L04A L 6RN 315L04A L 6RN 315L04A RN71-6K RN RN80-6K RN S RN90S L RN90L L 6RN100L M 6RN112M S 6RN132S M 6RN132M-6K M 6RN132M M 6RN160M L 6RN160L L 6RN180L L 6RN200Lk L 6RN200L M 6RN225M M 6RN250M S 6RN280S M 6RN280M S 6RN315S M 6RN315M L 6RN315L6A L 6RN 315L04A L 6RN 315L04A L RN 315L04A RN63M RN71M08K RN71M RN80M08K RN80M S RN90S L RN90L L 6RN100L L 6RN100L M 6RN112M Form No.: TA 1411a Issue: December 2012 Page 3 of 5

4 Frame Sizes Type No of poles 132S 6RN132S M 6RN132M M 6RN160M08K M 6RN160M L 6RN160L L 6RN180L08B L 6RN200Lk S 6RN225S M 6RN225M M 6RN250M S 6RN280S M 6RN280M S 6RN315S M 6RN315M L 6RN315L08B L 6RN315L08B L 6RN315L08B L 6RN315L08B Application/Limitation For use as propulsion motor documentation according to DNV Rules must be submitted for approval for each project. Type Approval documentation Technical info: Catalogue ROTOR nl electric motor, chapter 1-18, January l Test reports: Dekra Test Report No dated , Test field reports 6RN, Type test reports Certificate for electric motor DNV certificate nos ROT , ROT , ROT , ROT , CCS Certificate for Marine AC Motors no. LTP , BV Certificate of inspection no RTD 02.KEMA test report KRQ/LHL (IP class), issued Tests carried out Temperature test [R], Winding resistance cold and warm,overload test, Vibration measurement after balancing, No load test, Locked rotor test, High voltage test, Insulation resistance. Marking of product RN motors type designation technical data including rated voltage, RPM, rated power, ambient temperature, rated current, rated frequency, insulation class, IP class. Periodical assessment The scope of the periodical assessment is to verify that the conditions stipulated for the type are complied with, and that no alterations are made to the product design or choice of systems/components/materials. The main elements of the survey are: Inspection of factory samples, selected at random from the production line (where practicable) Review of production and inspection routines, including test records from product sample tests and control routines. Ensuring that systems/components/materials used comply with type approved documents and/or referenced system/component/material specifications. Form No.: TA 1411a Issue: December 2012 Page 4 of 5

5 Review of possible changes in design of systems/components/materials, software version and performance, and make sure that such changes do no affect the type approval given. Ensuring traceability between manufacturer s product type marking and the type approval certificate. Ensuring that type approved documentation is available. Survey to be performed at least every second year. END OF CERTIFICATE Form No.: TA 1411a Issue: December 2012 Page 5 of 5