Process Safety Management Training

Transcription

1 IHS OPERATIONAL EXCELLENCE & RISK MANAGEMENT Process Safety Management Training Leverage state-of-the-art resources and practical knowhow to learn about proven management system concepts and techniques. IHS trainers are subject matter experts who can teach you and your teams how to identify, analyze, mitigate and monitor process safety risks and hazards across your enterprise. BENEFITS: Process Safety Management training is an integral part of the IHS Risk Assessment Solution, which enables you to: All courses provide expert instruction in the best-practice professional methodologies to analyze and minimize risk. The training sessions are taught at your location or an IHS office and cover these topics: Process Hazards Analysis (PHA) Leadership Next Step from HAZOP to LOPA and Basic Overview of SIL Layers of Protection Analysis (LOPA) Lead PHA teams and initiatives Improve workplace safety with a goal of zero harm Ensure compliance with process safety regulations and standards Design and develop customized PHA solutions for our company Mitigate risk Understand the various risk assessment methodologies Job Safety Analysis Additional details on each course can be found on the following pages. Current Scheduled Courses Process Hazards Analysis (PHA) Leadership Apr 21-24, 2015 November 10-13, 2015 IHS Training Location - Houston, TX IHS Training Location - Miami, FL IHS, Calgary, Alberta, Canada Next Step from HAZOP to LOPA and Basic Overview of SIL Apr 28 May 1, 2015 Sept 1-4, 2015 Cost A daily training rate of $625 USD/ person applies for these courses. The training fee includes refreshments and lunch. Electronic copies of the training materials are included, as well as the hard copy. IHS reserves the right to cancel the course. Course cancellation notice is provided two weeks in advance of the start date. Questions: Please contact [email protected] to learn more about training content and availability. Process Safety Management Training

2 Process Hazards Analysis (PHA) Leadership This PHA Leadership course will empower you, and enable your organization through you, to identify, analyze, mitigate and monitor risks and hazards across the company. You will use state-of-the-art risk management systems from IHS for hands-on exercises and facilitation practice under the guidance of experienced professional instructors. You will learn tips and tricks to generate high quality risk studies in efficient and effective ways. It is mandatory that you have either technical background and/or experience in the oil, gas, chemicals, power, mining, pharmaceuticals, biotech or other process industries. This course provides practical training for the novice and refresher training for the seasoned professionals, including but not limited to: PHA Team members, Facilitators and Scribes Risk professionals Course Content Contractors Managers Engineers Supervisors Operators Maintenance Project Managers Technicians Consultants Day 1 - Basic PHA Methodology & Workshop Concepts of risk and safety, industrial incidents and lessons learned regulations and standards, various PHA techniques including HAZOP, What if, FMEA, and PHA, revalidation of PHAs, introduction to management of change, human factors in industrial safety and PHA workshop using IHS software. Day 2 - Advanced PHA Methodology Concepts & Workshop Concepts of PHA team leadership, how to conduct a facilitation, role of a PHA leader, techniques for efficient and effective facilitations, how to create nodes and PHA project management, optimization of PHA team performance, what is a high-quality PHA and PHA workshop using IHS software. Day 3 - Software End User IHS software walk-through and navigation, file management, walkthrough of preformatted industry standard PHA templates, comprehensive study and practice of end-user functions, hands-on end-user functions exercises. Day 4 - Software Advanced User Introduction to IHS software template configuration engine, walk-through of a PHA template creation from scratch and hands-on exercises, comprehensive study of advanced user functions and template user interface layout design. Training Dates Apr 21-24, 2015 November 10-13, 2015 IHS Training Location - Houston, TX IHS Training Location - Miami, FL IHS, Calgary, Alberta, Canada Process Safety Management Training

3 HAZOP to LOPA and Basic Overview of SIL This four-day course will empower you, and enable your organization through you, to identify, analyze, mitigate and monitor risks and hazards across the company, and systematically assess and manage the integrity of the protection layers. You will use state- of- the- art risk management systems for hands-on exercises under the guidance of experienced professional instructors. You will learn how to conduct the HAZOP and LOPA facilitation and perform SIL analysis. It is mandatory that you have a technical background and more than two years of experience in the oil, gas, chemicals, power, mining, pharmaceutical or other process industries. This advanced course provides practical training for the novice with a technical background in process engineering and refresher training for the seasoned professionals, including but not limited to: PHA Team members Managers Engineers Course Content Contractors PHA Facilitators and Scribes Supervisors Maintenance Risk Professionals Project Managers Consultants Day 1 - PHA Methodology and Workshop Concepts of risk and safety, industrial incidents and lessons learned, regulations and standards, HAZOP methodology, terminology and procedures, introduction to management of change, human factors in industrial safety and HAZOP workshop using IHS software. Day 2 - LOPA and Target SIL Assignment Introduction to target SIL assignment and LOPA, ALARP, tolerable risks, risk assessment and SIL determination methodologies, concepts of layers of protection, terminology. Day 3 - Introduction to LOPA Understanding LOPA, how does LOPA work, procedure, consequence and severity estimation, developing scenarios, initiating events and frequency estimation, IPLs, risk based decisions and workshop using IHS software. Day 4 - Introduction to SIL Analysis What is functional safety, regulations and standards, safety life cycle? Training Dates Apr 28- May 1, 2015 Sept 1-4, 2015 Process Safety Management Training

4 Layers of Protection Analysis (LOPA) This course will be beneficial to you and your organization as it will teach participants how and when LOPA should be used, how LOPA relates to qualitative Hazard Evaluation (e.g., HAZOP), and how to use the LOPA technique for SIL evaluation The course enhances easy learning, comprehension and success through a step-by-step approach with interactive learning and real world examples. Previous PHA/HAZOP experience and/or training is a recommended pre-requisite for participants who take this course. A wide variety of professionals and organizations will benefit from taking the LOPA training course including: Process safety personnel PHA analysts Others who need to apply or understand LOPA Supervisors and managers responsible for safety instrumented systems Please contact [email protected] to learn more about training content and availability. Process Safety Management Training

5 Job Safety Analysis Course content can be chosen from a combination of the two training modules described below. These modules comprise of topics, which will allow the course attendees to develop an understanding of the Job Safety Analysis (JSA) Methodology as well as getting them well acquainted with the documentation process, using a documentation tool. Course certificates that indicate the training modules covered are issued to participants who complete this course. Module One Methodology Training What are & Why use JSAs Related JSA standards Steps of a JSA Risk Criteria Evaluating Existing Controls and Safeguards Determining Preventive Measures WHMIS (Workplace Hazardous Materials Information System) Module Two Software Training Creating a new file Related JSA standards Administrative Data Overview Entry of Data - Basic Navigation Describing all Icons/Functions Project Settings Libraries Report Generation and Customization It is mandatory that you have a technical background and more than two years of experience in the process, oil, gas, chemicals, power, mining, pharmaceutical or other process industries. Process safety personnel Others who need to apply or understand Job Safety Analysis Supervisors and managers responsible for safety instrumented systems Please contact [email protected] to learn more about training content and availability. Process Safety Management Training