Drains and shower channels. Wastewater Drainage

Transcription

1 Drains and shower channels Wastewater Drainage

2 Drains for industrial and public buildings Bathrooms Wellness Ecoguss Practicus Bathroom drains For use in the private and commercial sector System The Ultraflat The Vertical Giro System 100 The Superflat... 94/95 Classic... 96/97 For use in the private and commercial sector Linearis Comfort Linearis Compact Linearis Super60... Linearis /114 The Universal with / without backwater protection Drehfix with / without backwater protection Volatile liquid traps with / without twin flap backwater valve Stainless steel drains and channels Quality drains and channels for foodprocessing operations Drains Drainage channels Catalogue 2.3 Parking deck drains Balcony / Roof drains /147 Gutter drains Yard drains Street gullies

3 Catalogue

4 Professional advantages Ecoguss the HighTec material. Everything is getting easier! Floor/Roof drains Ecoguss Ø 58/78/83/ Ecoguss the new material, is becoming more and more accepted. Drains made from Ecoguss combine all the advantages of polymer drains, such as low weight and no corrosion, with the advantages of cast iron drains such as sound insulation and heat resistance. Metallic composite material Metallic properties but still non corrosive and nonconductive (no electrical grounding necessary!) Honeycomb structure for perfect concrete bonding The economic alternative to cast iron drains Variable upper section High temperatureresistant materials Briefly up to 400 C, for processing with hot bitumen acc. to DIN Chemical resistance Extremely high acid/alkali resistance for chemicallypolluted wastewater. Sound insulation Soundabsorbent material For increased sound insulation to DIN 4109 < 30 db (A) With SML pipe connection Connection to SML pipe according to DIN in Ø 58, 78, and Ø 83! No transition pieces any more! For an appealing design and unmatched hygiene Selfcleaning effect thanks to permanently corrosionfree and smooth surface. not that but this! QuickFit the allround seal Cheaper and faster installation: QuickFit the passage seal for core drillings, with approval no. Z Minimised core drillings Ø 160 mm 2/3 costsavings, no grouting required on site Additional sound insulation and smoke tight closure between core drilling and drain. Connection of the moisture barrier/sliding coat Lock & Lift system for fast cleaning. Design in a nutshell Easy maintenance Thanks to removeable odour trap Products see pages Catalogue 2.3 Insert QuickFit in core drilling (Ø 160 mm). Lower drain body with vertical outlet into QuickFit. The prizewinning design covers from the 2012 collection are a first rate combination of aesthetics and technology. Eight different stainless steel covers provide enough versatility to meet individual design needs. The recessed cover for onsite tiling allow the cover to be matched to the floor. If necessary, click pressure sealing flange into place, fit upper section. Kessel

5 Practicus the heavy duty polymer drain Point drains System Floor/Roof drains Practicus Ø 50/75/ High flow rate of up to 1.8 l/s Selfcleaning effect thanks to corrosionfree and smooth surface Variable cover/upper section Honeycomb structure for perfect concrete bonding Ideal for connecting to plastic pipes KESSEL modular system: Ecoguss and Practicus see page 82/83 Components System Upper section in ABS with design cover Oval 120 mm Art. # Fire and smoke protection FireKit Pressure sealing flange Art. # Fireresistance class F 120 with approval no. Z Optional for drain bodies Ecoguss or Practicus with vertical outlet. Only use in combination with odour trap! Drain body Practicus in PP Art. # Odour trap Sealing water height 50 mm according to EN 3 = Drain Fire and smoke protection FireKit with approval no. Z Invisible Oval Spot Cross Festival Parade Slot Sticks Products see pages Catalogue

6 Ecoguss and Practicus Design the project drain you need yourself using our practical matrix order system. Select the drain body, lateral or vertical outlet and the diameter Select the matching upper section The Article # for the matching drain is stated in the respective section. For other product combinations and accessories, see the modular system at page 82/ Catalogue 2.3

7 Ecoguss with pressure sealing flange Drain body Upper sections 1.8 l/sec flow rate Sealing water height 50 mm Ecoguss with pressure sealing flange with odour trap, connection to SMLpipe Shallow bed upper section in ABS Shallow bed upper section in ABS Shallow bed upper section in ABS Upper section in ABS Upper section in ABS 273 B H 147 Ø B H min. 10 max min. 10 max min. 10 max Ø H H 83 With slotted cover 138 x 138 mm and rim, class L 15, screwed. Art. # With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With design cover Oval 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With slotted cover 138 x 138 mm, class K 3, screwed. Art. # Ø 58 Complete drain comprising a combination of the drain body and upper section Lateral outlet Art. # Vertical outlet Art. # Ø 78 Lateral outlet Art. # Vertical outlet Art. # Ø 83 Lateral outlet Art. # Vertical outlet Art. # Ø Lateral outlet Art. # Vertical outlet Art. # For other combinations and accessories see modular system page 82/83 * Ø = Outer Diameter Catalogue

8 Ecoguss with glue flange Drain body Upper sections 1.8 l/sec flow rate Sealing water height 50 mm Ecoguss with glue flange with odour trap, connection to SMLpipe Shallow bed upper section in ABS Shallow bed upper section in ABS Shallow bed upper section in ABS Upper section in ABS Upper section in ABS B H 145 Ø B H min. 10 max min. 10 max min. 10 max H With slotted cover 138 x 138 mm and rim, class L 15, screwed. Art. # With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With design cover Oval 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With slotted cover 138 x 138 mm, class K 3, screwed. Art. # Ø H Ø 58 Complete drain comprising a combination of the drain body and upper section Lateral outlet Art. # Vertical outlet Art. # Ø 78 Lateral outlet Art. # Vertical outlet Art. # Ø 83 Lateral outlet Art. # Vertical outlet Art. # Ø Lateral outlet Art. # Vertical outlet Art. # For other combinations and accessories see modular system page 82/83 * Ø = Outer Diameter 76 Catalogue 2.3

9 Ecoguss with connection flange Drain body Upper sections 1.8 l/sec flow rate Sealing water height 50 mm Ecoguss with connection flange with odour trap, connection to SMLpipe Shallow bed upper section in ABS Shallow bed upper section in ABS Shallow bed upper section in ABS Upper section in ABS Upper section in ABS 132 B H Ø B H min. 10 max min. 10 max min. 10 max H 91 With slotted cover 138 x 138 mm and rim, class L 15, screwed. Art. # With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With design cover Oval 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With slotted cover 138 x 138 mm, class K 3, screwed. Art. # Ø H Ø 58 Complete drain comprising a combination of the drain body and upper section Lateral outlet Art. # Vertical outlet Art. # Ø 78 Lateral outlet Art. # Vertical outlet Art. # Ø 83 Lateral outlet Art. # Vertical outlet Art. # Ø Lateral outlet Art. # Vertical outlet Art. # For other combinations and accessories see modular system page 82/83 * Ø = Outer Diameter Catalogue

10 Ecoguss For interior installation according to EN 3 Illustration and dimensioned drawing Article description Ø* Article # with shallow bed gasket Variable upper section min. 40 max. 96 min. 10 max H 29 Floor/Roof drain Ecoguss Ø..., vertical outlet, for connection to SMLpipe according to DIN With removable odour trap. Sealing water height 50 mm. With lip seal. With Variofix shallow bed upper section in ABS with slotted cover 138 x 138 mm and rim, screwed, for tile thicknesses of 816 mm, Class L 15 (able to withstand loads up to max. 1.5 to). Ø* H Ø 58 Ø 78 Ø 83 Ø l/sec flow rate Installation area 180 x 180 mm with pressure sealing flange Variable upper section min. 25 max EN 3 LGA Typetested and monitored guaranteed with tested quality Floor/Roof drain Ecoguss with pressure sealing flange Vertical outlet, With removable odour trap. Sealing water height 50 mm. With lip seal. With pressure sealing flange With upper section in ABS with slotted cover 138 x 138 mm and rim, Class L 15 (able to withstand loads up to max. 1.5 to). Ø l/sec flow rate Installation area 180 x 180 mm EN 3 LGA Typetested and monitored guaranteed with tested quality * Ø = Outer Diameter with connection flange Variable upper section 1.8 l/sec flow rate Installation area 180 x 180 mm min. 20 max. 76 Floor/Roof drain Ecoguss Ø..., vertical outlet, for connection to SMLpipe according to DIN With removable odour trap. Sealing water height 50 mm. With lip seal. With upper section in ABS with slotted cover 138 x 138 mm, screwed, Class K 3 (able to withstand loads up to max. 300 kg). Ø* H EN LGA Typetested and monitored guaranteed with tested quality Ø 58 Ø 78 Ø 83 Ø Catalogue 2.3

11 Practicus with pressure sealing flange Drain body Upper sections 1.8 l/sec flow rate Sealing water height 50 mm Practicus with pressure sealing flange with odour trap Shallow bed upper section in ABS Shallow bed upper section in ABS Shallow bed upper section in ABS Upper section in ABS Upper section in ABS 273 B H 147 Ø B H min. 10 max min. 10 max min. 10 max Ø H H With slotted cover 138 x 138 mm and rim, class L 15, screwed. Art. # With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With design cover Oval 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With slotted cover 138 x 138 mm, class K 3, screwed. Art. # Ø 50 Complete drain comprising a combination of the drain body and upper section Lateral outlet Art. # Vertical outlet Art. # Ø 75 Lateral outlet Art. # Vertical outlet Art. # Ø Lateral outlet Art. # Vertical outlet Art. # For other combinations and accessories see modular system page 82/ * Ø = Outer Diameter Catalogue

12 Practicus with connection flange Drain body Upper sections 1,8 l/sec flow rate Sealing water height 50 mm Practicus with connection flange with odour trap Shallow bed upper section in ABS Shallow bed upper section in ABS Shallow bed upper section in ABS Upper section in ABS Upper section in ABS 132 B H Ø B H min. 10 max min. 10 max min. 10 max H 91 With slotted cover 138 x 138 mm and rim, class L 15, screwed. Art. # With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With design cover Oval 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # With slotted cover 138 x 138 mm, class K 3, screwed. Art. # Ø H Ø 50 Complete drain comprising a combination of the drain body and upper section Lateral outlet Art. # Vertical outlet Art. # Ø 75 Lateral outlet Art. # Vertical outlet Art. # Ø Lateral outlet Art. # 45 Vertical outlet Art. # For other combinations and accessories see modular system page 82/ * Ø = Outer Diameter 80 Catalogue 2.3

13 Practicus For interior installation according to EN 3 Illustration and dimensioned drawing Article description Ø* Article # with connection flange Variable upper section min. 20 max l/sec flow rate Installation area 180 x 180 mm EN 3 Floor drain Practicus in PP, vertical outlet With removable odour trap. Sealing water height 50 mm. With lip seal and protective cover for use during construction. With upper section in ABS with slotted cover 138 x 138 mm in ABS, black, Class K 3 (able to withstand loads up to max. 300 kg). LGA Typetested and monitored guaranteed with tested quality Ø with connection flange Variable upper section min. 20 max l/sec flow rate Installation area 180 x 180 mm EN 3 Floor drain Practicus in PP, Ø..., vertical outlet With removable odour trap. Sealing water height 50 mm. With lip seal and protective cover for use during construction. With upper section in ABS with slotted cover 138 x 138 mm, screwed, Class K 3 (able to withstand loads up to max. 300 kg). LGA Typetested and monitored guaranteed with tested quality Ø 50 Ø 75 Ø * Ø = Outer Diameter with connection flange Variable upper section min. 20 max l/sec flow rate Installation area 220 x 180 mm EN 3 92 Floor drain Practicus in PP, lateral outlet 2.5 With removable odour trap. Sealing water height 50 mm. With lip seal and protective cover for use during construction. With upper section in ABS with slotted cover 138 x 138 mm in ABS, black, Class K 3 (able to withstand loads up to max. 300 kg). Catalogue 2.3 LGA Typetested and monitored guaranteed with tested quality Ø with glue flange Floor drain Practicus Ø Variable upper section min. 30 max l/sec flow rate Installation area 180 x 180 mm EN 3 in PP, vertical outlet With removable odour trap. Sealing water height 50 mm. With lip seal, retaining ring and seal and protective cover for use during construction. With glue flange and counter flange. With upper section made of polymer with slotted cover 138 x 138 mm, screwed, Class K 3 (able to withstand loads up to max. 300 kg). LGA Typetested and monitored guaranteed with tested quality 81

14 Ecoguss and Practicus Point drains System Variofix shallow bed upper sections min. 10 max min. 23 max min. 10 max. 21 in ABS with slotted cover/rim 138 mm, Class L 15, screwed. For tile thickness of 816 mm. Art. # with antislip drain cover and rim, Class L 15. Art. # mm 120 with recessed polymer cover for onsite tiling 132 mm and rim, Class K 3, with locking system. Art. # Upper sections in ABS in ABS completely in ABS, tileable with slotted cover/rim 138 mm screwed, Class L 15 Art. # with slotted cover 138 mm, Class K 3, in stainless in ABS, black steel, screwed Art. # Art. # mm, Class K 3, L 15 / M with slotted with antislip cover, screwed drain cover, Art. # Class L 15 / M Art. # mm, made of polymer, Class K 3 with rim Art. # with rim in polymer Art. # Accessories Glue flange with counter flange, Ø 348 mm (also for compound seal) Art. # Mesh fabric for Art. # Art. # Drain bodies Ecoguss and Practicus All drain bodies: 1.8 l/sec flow rate Sealing water height 50 mm Pressure sealing flange, Ø 273 mm, Art. # Elastomer waterproof membrane in NBR for Art. # Art. # Ecoguss with removable odour trap 82 Catalogue B H Intermediate section with glue flange in ABS, for shallow bed gasket Art. # H 91 Ø Extension section in PP, with lip seal without lateral inlet Art. # with lateral inlet Art. # Lateral outlet B H Article # Vertical outlet

15 Variofix shallow bed upper sections with design covers KESSELmodular design Combinations for any installation requirement min. 10 max. 23 in ABS 120 design covers 120 mm and rim, Class K 3 / L 15. For tile thickness of 821 mm, with or without Lock & Lift System. Kessel (Cl.L 15) Oval (Cl.L 15) Spot (Cl.K 3) Cross (Cl.K 3) Festival (Cl.K 3) Parade (Cl.K 3) Slot (Cl.K 3) Sticks (Cl.K 3) with Lock & Lift Art. # without Lock & Lift Art. # Upper sections with design covers in ABS design covers 90 with Lock & Lift Art. # 120 mm and rim, Class K 3 / L 15 with or without Lock & Lift System. Kessel (Cl.L 15) Oval (Cl.L 15) Spot (Cl.K 3) Cross (Cl.K 3) Festival (Cl.K 3) Parade (Cl.K 3) Slot (Cl.K 3) Sticks (Cl.K 3) without Lock & Lift Art. # Multistop Hair filter as an odour, made of foam, rodent polymer and insect stop Art. # Art. # Sludge trap Art. # Odour trap All drain bodies: 1.8 l/sec flow rate Sealing water height 50 mm 132 Practicus in PP with removable odour trap B for all upper sections System, sealing water height 50 mm according to norm Art. # H Certification no. Z FireKit Fire protection insert Only for Ecoguss / Practicus drains with vertical outlet and odour trap Art. # H 91 Ø Catalogue 2.3 Lateral outlet B Delivery without dowels Fire protection panel 380 mm, 20 mm thick Art. # Kunkel dowels KDM 6x50, 4 dowels Art. # H Article # Vertical outlet Insulating body Certification no. Z QuickFit the passage seal for core drillings for drain bodies with vertical outlet with fire protection Art. # without fire protection Art. # mm 120 fits all Ecoguss / Practicus drain bodies with vertical outlet Art. #

16 84 Catalogue 2.3

17 Bathroom drains Catalogue

18 Professional advantages The bathroom drain collection Bathroom drains The Ultraflat Ideal for renovation work in existing buildings Variable upper section Now also available in Ø 50 With shallow bed gasket Optimised design and function With connection flange With glue flange Removable hair filter made of polymer Lock & Lift System: Simultaneous locking and removal mechanism Bathroom drain The Ultraflat with shallow bed gasket minimum installation height 69 mm Design in a nutshell Installation height 69 mm Up to the upper edge of the flange 86 Catalogue 2.3 incl. cover Installation height 54 mm The prizewinning design covers from the 2012 collection are a first rate combination of aesthetics and technology. Eight different stainless steel covers provide enough versatility to meet individual design needs. The recessed cover for onsite tiling allow the cover to be matched to the floor. Products see page 88 Kessel

19 Point drains System Bathroom drain The Vertical Point drains System Variable upper section Compact drain body makes it ideal for renovations Ø 50 Ø 40 Flexible connection option Ø 40 or Ø 50, can be sawn off Multistop: Ideal odour trap for drains that dry out frequently. Can be retrofitted to installed drains. Rodent / insect trap... foam trap and... The invisible drain with recessed cover for onsite tiling and locking system odour trap! Invisible Oval Spot Cross Festival Parade Slot Sticks Products see page 89 Catalogue

20 Bathroom drains The Ultraflat System Illustration and dimensioned drawing Article description Ø* Article # with glue flange Bathroom drain The Ultraflat in ABS, with lateral outlet and one lateral inlet Ø 40 with glue flange With removable odour trap. With upper section in ABS with slotted cover 120 x 120 mm and rim, screwed, Class K 3 (able to withstand loads up to max. 300 kg). Ø * Ø = Outer Diameter l/sec flow rate Installation area 350 x 350 mm min. 69 min. 85 min. 85 for shallow bed gasket with connection flange Art. # Art. # Catalogue 2.3 Flow rate Ø 40: 0.6 l/sec 2 Ø 50: 1 l/sec Installation area 300 x 300 mm Flow rate Ø 50: 1.0 l/sec 2 Ø 50: 0.9 l/sec Installation area 250 x 300 mm Bathroom drain The Ultraflat for shallow bed gasket with lowest installation height in ABS, soundabsorbing, Ø... lateral outlet 2.5 With removable odour trap. With upper section in ABS with slotted cover 120 x 120 mm, Class K 3 (able to withstand loads up to max. 300 kg). Bathroom drain The Ultraflat in ABS, soundabsorbing, Ø 50 lateral outlet 2.5 With upper section in ABS 1 With odour trap With lip seal. with design cover Kessel 120 x 120 mm and rim in stainless steel, with Lock & Lift System, Class L 15 (able to withstand loads up to max. 1.5 to). Additional design covers see page 91 With upper section made of polymer 2 With Multistop: Odour, foam, rodent and insect stop with cover 120 x 120 mm Class K 3 (able to withstand loads up to max. 300 kg). 1 Ø Ø Ø Ø

21 Bathroom drain The Vertical System Illustration and dimensioned drawing Article description Ø* Article # with connection flange min. 9 max Bathroom drain The Vertical in ABS, Ø 50/40 vertical outlet With removable odour trap. With upper section in ABS with slotted cover 120 x 120 mm, Class K 3 (able to withstand loads up to max. 300 kg). Ø 50/ l/sec flow rate Installation area 160 x 160 mm EN 3 LGA Typetested and monitored guaranteed with tested quality Bathroom drain Giro For interior installation according to EN 3 System Illustration and dimensioned drawing Article description Ø* Article # with connection flange Variable upper section min. 65 max Bathroom drain Giro in PP, soundabsorbing, Ø 50, flexible outlet With removable odour trap, fixed lip seal. With rotatable lateral inlet Ø 50 With upper section in ABS with slotted cover 120 x 120 mm Class K 3 (able to withstand loads up to max. 300 kg). Ø Inlet flexible outlet rotatable Art. # l/sec flow rate Installation area 350 x 250 mm EN 3 LGA Typetested and monitored guaranteed with tested quality Catalogue

22 Bathroom drains The Ultraflat and The Vertical Point drains System Variofix shallow bed upper sections min. 10 max min. 23 max min. 10 max in ABS with slotted cover/rim 138 mm, Class L 15, screwed. For tile thickness of 816 mm. Art. # with antislip drain cover and rim, Class L 15. Art. # mm 120 with recessed polymer cover for onsite tiling 132 mm and rim, Class K 3, with locking system. Art. # Upper sections in ABS in ABS completely in ABS, tileable with slotted cover/rim 138 mm screwed, Class L 15 Art. # with slotted cover 138 mm, Class K 3, in stainless in ABS, black steel, screwed Art. # Art. # mm, Class K 3, L 15 / M with slotted with antislip cover, screwed drain cover, Art. # Class L 15 / M Art. # mm, made of polymer, Class K 3 with rim Art. # with rim in polymer Art. # Accessories Glue flange with counter flange, Ø 348 mm (also for compound seal) Art. # Pressure sealing flange, Ø 273 mm, Art. # Intermediate section with glue flange in ABS, for shallow bed gasket Art. # Drain bodies 1.0 l/sec flow rate *) Sealing water height 30 mm Elastomer waterproof membrane in NBR for Art. # , , Art. # l/sec flow rate *) Sealing water height 30 mm Ø Ø 40 Ø 50 The Ultraflat in ABS Lateral outlet Ø 50/75, with removable odour trap Lateral outlet Ø 50 Art. # Lateral outlet Ø 75 Art. # Catalogue 2.3 The Ultraflat in ABS Lateral outlet Ø 50, with removable odour trap with lateral inlet Ø 40, lateral outlet Ø 50 Art. #

23 Variofix shallow bed upper sections with design covers KESSELmodular design Combinations for any installation requirement min. 10 max. 23 in ABS 120 design covers 120 mm and rim, Class K 3 / L 15. For tile thickness of 821 mm, with or without Lock & Lift System. Kessel (Cl.L 15) Oval (Cl.L 15) Spot (Cl.K 3) Cross (Cl.K 3) Festival (Cl.K 3) Parade (Cl.K 3) Slot (Cl.K 3) Sticks (Cl.K 3) with Lock & Lift Art. # without Lock & Lift Art. # Upper sections with design covers in ABS design covers 90 with Lock & Lift Art. # 120 mm and rim, Class K 3 / L 15 with or without Lock & Lift System. Kessel (Cl.L 15) Oval (Cl.L 15) Spot (Cl.K 3) Cross (Cl.K 3) Festival (Cl.K 3) Parade (Cl.K 3) Slot (Cl.K 3) Sticks (Cl.K 3) without Lock & Lift Art. # Extension section in PP, with lip seal without lateral inlet Art. # with lateral inlet Art. # l/sec flow rate *) Sealing water height 30 mm The Ultraflat in ABS 63 Multistop as an odour, foam, rodent and insect stop Art. # with sealing flange for shallow bed gasket, with removable odour trap Lateral outlet Ø 40, Art. # Hair filter made of polymer Art. # l/sec flow rate *) Sealing water height 30 mm Lateral outlet Ø 50, Art. # Catalogue 2.3 Sludge trap made of polymer Art. # l/sec flow rate *) Sealing water height 50 mm Odour trap The Vertical in ABS Vertical outlet Ø 50/40 with removable odour trap fits all upper sections System Art. # for all upper sections System, sealing water height 50 mm according to norm Art. # *) according to EN 3 20 mm threshold

24 Professional advantages The bathroom drain collection Bathroom drains The Superflat For low installation heights 95 mm Variable upper section Variable upper section With sound absorption Lowest installation height flexible outlet With shallow bed gasket Optimised design and function With flexible outlet Sealing system safe to install Removable hair filter made of polymer Lock & LiftSystem Simultaneous locking and removal mechanism Multistop: Ideal odour trap for drains that dry out frequently. Can be retrofitted to installed drains. Rodent / insect trap... foam trap and... odour trap! Products see pages Catalogue 2.3

25 Point drains System 100 Point drains System 100 Bathroom drains Classic Compact and high performance Variable cover/upper section Variable cover/upper section Twin sealing flanges Our classical products With glue flange The invisible drain with recessed cover for onsite tiling and locking system Tip: Minimum installation depth for bathroom renovation Bathroom drain, System 100 The Superflat Page mm Design covers made of solid stainless steel and recessed covers for onsite tiling for a modern bathroom design Our design covers received the red dot award for high design quality in the Product Design category Products see pages Catalogue

26 Bathroom drains The Superflat System 100 Illustration and dimensioned drawing Article description Ø* Article # min. 104 max. 112 with shallow bed gasket Installation area 260 x 180 mm Variable upper section flexible outlet 50 min. 19 max Bathroom drain The Superflat for shallow bed gasket with lowest installation height in PP, soundabsorbing, Ø 50 flexible outlet, 0.8 l/sec flow rate With removable odour trap. With lateral inlet Ø 40 and fixed lip seal. No lateral adjustment of the slotted cover With upper section in ABS with slotted cover 95 x 95 mm, Class K 3 (able to withstand loads up to max. 300 kg). Ø with shallow bed gasket min. 10 max Variable cover/ Upper section flexible outlet min. 45 max. Bathroom drain The Superflat in PP, soundabsorbing, Ø 50 flexible outlet, 0.8 l/sec flow rate With removable odour trap. With lateral inlet Ø 40 and fixed lip seal. With Variofix shallow bed upper section in ABS with design cover Oval 120 x 120 mm and rim in stainless steel, for tile thicknesses of 821 mm, Class L 15 (able to withstand loads up to max. 1.5 to), with Lock & Lift System. with standard slotted cover 95 x 95 mm, for tile thicknesses of 614 mm, Class K 3 (able to withstand loads up to max. 300 kg). Ø Ø Art. # Installation area 260 x 180 mm with glue flange min. 25 max Installation area 260 x 180 mm * Ø = Outer Diameter Variable upper section 94 Catalogue flexible outlet Bathroom drain The Superflat in PP, soundabsorbing, Ø 50 flexible outlet, 0.8 l/sec flow rate With removable odour trap. With lateral inlet Ø 40 and fixed lip seal. With glue flange and counter flange With upper section in ABS with recessed polymer drain cover for onsite tiling x mm and rim, Class K 3 (able to withstand loads up to max. 300 kg), with locking system, for tile thickness up to 10 mm. Ø

27 Bathroom drains The Superflat System 100 Ø* Illustration and dimensioned drawing Article description Article # min. 10 max with connection flange Variable upper section flexible outlet Bathroom drain The Superflat in PP, soundabsorbing, Ø 50 flexible outlet, 0.8 l/sec flow rate With removable odour trap. With lateral inlet Ø 40 and fixed lip seal. With upper section in ABS with slotted cover 100 x 100 mm, min. installation height 90 mm, Class K 3 (able to withstand loads up to max. 300 kg). Ø Installation area 260 x 180 mm Catalogue

28 Classic System 100 Illustration and dimensioned drawing Article description Ø* Article # Art. # with shallow bed gasket 90 Ø Ø 50 min. 10 max. 23 Variable cover/ Upper section min. 45 max. Installation area 220 x 180 mm Bathroom drain Classic in ABS, Ø... lateral outlet 2.5, 0.8 l/sec flow rate in ABS, Ø... vertical outlet, 0.8 l/sec flow rate With removable odour trap, Sealing water height 50 mm. With fixed lip seal. With Variofix shallow bed upper section in ABS 1 with design cover Oval 120 x 120 mm and rim, for tile thicknesses 821 mm, with Lock & Lift System, Class L 15 (able to withstand loads up to max. 1.5 to). 2 with standard slotted cover 95 x 95 mm, for tile thicknesses 614 mm, Class K 3 (able to withstand loads up to max. 300 kg). 3 with slotted cover 138 x 138 mm and rim, for tile thicknesses 816 mm, Class L 15 (able to withstand loads up to max. 1.5 to). 1 Lateral outlet Ø 50 Ø 75 Vertical outlet Ø 50 Ø 75 2 Lateral outlet Ø 50 Ø 75 Vertical outlet Ø 50 Ø 75 3 Lateral outlet Ø 50 Ø 75 Vertical outlet Ø 50 Ø 75 EN LGA Typetested and monitored guaranteed with tested quality Art. # Art. # * Ø = Outer Diameter Twin sealing flanges Variable cover/ Upper section min. 8 max.16 Installation area 260 x 180 mm with glue flange Variable upper section min. 55 max Catalogue 2.3 min. 20 max. 60 Installation area 180 x 180 mm Bathroom drain Classic in ABS, Ø... lateral outlet 2.5, 0.8 l/sec flow rate in ABS, Ø... vertical outlet, 0.8 l/sec flow rate With removable odour trap. Sealing water height 50 mm. With fixed lip seal. With glue flange and counter flange With Variofix shallow bed upper section in ABS with slotted cover 95 x 95 mm, for tile thickness 614 mm, Class K 3 (able to withstand loads up to max. 300 kg). Bathroom drain Classic in ABS, Ø... lateral outlet 2.5, 0.8 l/sec flow rate in ABS, Ø... vertical outlet, 0.8 l/sec flow rate With removable odour trap. Sealing water height 50 mm. With fixed lip seal. With glue flange and counter flange With upper section in ABS with slotted cover 100 x 100 mm, Class K 3 (able to withstand loads up to max. 300 kg). Lateral outlet Ø Ø Vertical outlet Ø Ø EN 3 LGA Typetested and monitored guaranteed with tested quality Lateral outlet Ø Ø Vertical outlet Ø Ø EN 3 LGA Typetested and monitored guaranteed with tested quality

29 Classic System 100 Illustration and dimensioned drawing Article description Ø* Article # with connection flange 90 Variable upper section min. 25 max. 90 Bathroom drain Classic in ABS, Ø... lateral outlet 2.5, 0.8 l/sec flow rate in ABS, Ø... vertical outlet, 0.8 l/sec flow rate With removable odour trap. Sealing water height 50 mm. With fixed lip seal. With upper section in ABS 1 with recessed polymer drain cover for onsite tiling x mm, Class K 3 (able to withstand loads up to max. 300 kg), with locking system. 2 with slotted cover 100 x 100 mm, Class K 3 (able to withstand loads up to max. 300 kg). 1 Lateral outlet Ø 50 Ø 75 Vertical outlet Ø 50 Ø 75 2 Lateral outlet Ø 50 Ø 75 Vertical outlet Ø 50 Ø Art. # Installation area 220 x 180 mm with connection flange Variable upper section min. 25 max. 65 Bathroom drain Classic in ABS, Ø... lateral outlet 2.5, 0.8 l/sec flow rate With removable odour trap. Sealing water height 50mm. With fixed lip seal. Upper section with sealing flange for use with 1 4 mm vinyl / synthetic flooring with slotted cover made of polymer, grey, Class K 3 (able to withstand loads up to max. 300 kg). EN 3 Ø 50 Ø 75 LGA Typetested and monitored guaranteed with tested quality Art. # Installation area 220 x 180 mm EN 3 LGA Typetested and monitored guaranteed with tested quality with connection flange Variable upper section 135 Installation area 180 x 180 mm * Ø = Outer Diameter min. 25 max. 65 Bathroom drain Classic in ABS, Ø... vertical outlet, 0.8 l/sec flow rate With removable odour trap. Sealing water height 50mm. With fixed lip seal. Upper section with sealing flange for use with 1 4 mm vinyl / synthetic flooring with slotted cover made of polymer, grey, Class K 3 (able to withstand loads up to max. 300 kg). Ø 50 Ø 75 EN LGA Typetested and monitored guaranteed with tested quality Catalogue

30 Bathroom drains Classic, The Superflat and Floordrain ME Point drains System 100 Variofix shallow bed upper sections min. 10 max min. 10 max min. 10 max. 21 in ABS with standard slotted cover, Class K 3. For tile thickness of 614 mm. Art. # mm with slotted cover/rim 150 x 150 mm, Class L 15, screwed. For tile thickness of 816 mm. Art. # with recessed polymer cover for onsite tiling mm and rim, Class L 15, with locking system Art. # Upper sections in PP in ABS in ABS, tileable with sealing flange for use with 1 4 mm vinyl / synthetic flooring, slotted cover made of polymer, Ø 120 mm, Class K 3. Art. # with slotted cover 100 mm, Class K 3. Art. # mm, made of polymer, Class K 3 with rim with rim in polymer Art. # Art. # in ABS with slotted cover 150 x 150 mm and rim, Class L 15, nonslip. Art. # Accessories 332 Glue flange with counter flange (also for compound seal) Art. # Drain bodies 39 Elastomer waterproof membrane in PVC Art. # in EPDM Art. # Bathroom drain Classic in ABS Ø Extension section The waterproof membrane in PVC and EPDM are not suitable for connections to asphalt sheeting. in PP, with pressure sealing flange, flange width 63 mm Art. # mm 0.8 l/sec flow rate *) Sealing water height 50 mm Ø156 Ø129 Extension section 98 Catalogue with removable odour trap Lateral outlet Vertical outlet Art. # Art. # Art. # Art. # Ø 65 Ø in ABS, with glue flange and counter flange Art. # Mesh fabric for Art. # Art. # A 135 Ø156 Ø129 Ø without removable odour trap Lateral outlet Vertical outlet Art. # Art. # Art. # Art. # With glue flange and waterproof membrane premounted in PVC 1200 x 1200 mm Art. # x 2000 mm Art. # Waterproof membrane in PVC without punchedout hole 1800 x 2000 mm Art. # Glue Art. # l/sec flow rate *) Floordrain ME in ABS Three lateral inlets Ø 55, one lateral outlet Ø 82, with removable odour trap Glue connection according to BS 5255 Art. #

31 KESSELmodular design Combinations for any installation requirement min. 10 max min. 10 max. 23 in ABS with design cover KESSEL 120 x 120 mm and rim, Class L 15. For tile thickness of 821 mm, Lock & Lift System. Art. # with design cover Oval 120 x 120 mm and rim, Class L 15. For tile thickness of 821 mm, Lock & Lift System. Art. # Extension section in ABS with lip seal Art. # Sludge trap made of polymer Art. # in ABS design covers with Lock & Lift Art. # without Lock & Lift Art. # 120 mm and rim, Class K 3 / L 15 with or without Lock & Lift System. Kessel (Cl.L 15) Oval (Cl.L 15) Spot (Cl.K 3) Cross (Cl.K 3) Festival (Cl.K 3) Parade (Cl.K 3) Slot (Cl.K 3) Sticks (Cl.K 3) Multistop as an odour, foam, rodent and insect stop Art. # Hair filter made of polymer, Ø 108 mm Art. # Transition section with sealing ring Ø 50 Ø 50/75 Art. # Ø 50/40 Art. # l/sec flow rate *) Sealing water height 30 mm 32 Conversion kit, DIN pushfit connection for article numbers: Consist of 3 inlet adapter Ø 50 mm, 1 outlet adapter Ø 75 mm and 1 pushfit connection for upper section Ø, DIN Art. # Conversion kit, DIN glue connection for article number: Consist of 3 inlet adapter Ø 50 mm, and 1 outlet adapter Ø 75, DIN Art. # *) according to EN 3 20 mm threshold Bathroom drain The Superflat in PP Lateral outlet Ø 50, with removable odour trap Without lateral inlet Art. # One lateral inlet Ø 40 Art. # Three lateral inlets Ø 40 Art. # Catalogue

32 100 Catalogue 2.3

33 Catalogue

34 Professional advantages Linearis Comfort Stainless steel cover is reversable and tileable Tip: Minimum installation depth for bathroom renovation Channel length: 750 mm, 850 mm, 950 mm, 1050 mm, 1150 mm. Shower channel, System Linearis Comfort 93 mm Waterproofing flange height only 86 mm! 63 l/min (at 10 mm threshold) Vertically adjustable frame Stainless steel channel and rim can be adjusted from 722 mm to meet on site tile/ granite/marble thicknesses. For natural stone floorings up to 20 mm thickness. Installation on room or wall side of shower Feet can be pivoted away as required for wallside installation. Channel locking mechanism as standard Multistop (optional) Odour, foam, rodent and insect stop Hair filter (optional) Exemplary hygiene smooth, easyclean surface, selfcleaning effect The new design shower channel Linearis Comfort bright ideas for individual customised concepts Design right down the line Shower channel Crystal Shower channel Light Shower channel Logo Crystal AB Emerald AB Blue Zircon Siam AB Capri Blue Products see pages Catalogue 2.3

35 Linearis Compact Line Draining System Tip: Minimum installation depth for bathroom renovation Stainless steel cover is reversable and tileable Shower channel, System Linearis Compact 80 mm Waterproofing flange height only 65 mm! Channel length: 300 mm, 450 mm, 550 mm, 650 mm, 750 mm, 850 mm, 950 mm, 1050 mm, 1150 mm Hygienic design single piece body and channel cover 36 l/min (at 10 mm threshold) Installation in the room or on the wall The length of the feet can be shortened on the left or right if mounted to the wall. Flow rate with counter slope up to 36 l/min. at 10 mm threshold. Flow rate increased to 54 l/min. with use of Multistop odour trap. Cover and rim made of stainless steel. Cleaning and maintenance made easy Multistop (optional) Odour, foam, rodent and insect stop Hair filter (optional) The shower channel Linearis Compact 9 channel lengths to meet all installation situations Products see page Catalogue

36 93108 mm 86 mm mm 86 mm mm 86 mm mm 86 mm Linearis Comfort Channel Illustration Article description Article # length L: 750 / 850 / 950 / 1050 / 1150 mmm 50 With installation supports Shower channel Linearis Comfort with drain body in ABS Ø 50, lateral outlet with removable odour trap, sealing water height 22 mm cover and rim (Channel cover can be reversed and tiled on site), Class K 3 35 mm 66 mm 60 l/min flow rate without threshold 63 l/min flow rate with 10 mm threshold 750 mm 850 mm 950 mm 1050 mm 1150 mm L: 750 / 850 / 950 / 1150 mm Shower channel Linearis Comfort Light with drain body in ABS Ø 50, lateral outlet with removable odour trap, sealing water height 22 mm cover with maintenancefree induction technology and white LED lights (other colours available upon request), 15 m power cable Handles loads up to 100 kg 35 mm 750 mm 850 mm 950 mm 1150 mm IC IC IC IC mm With installation supports 60 l/min flow rate without threshold 63 l/min flow rate with 10 mm threshold L: 750 / 850 / 950 / 1150 mm Shower channel Linearis Comfort Crystal with drain body in ABS Ø 50, lateral outlet with removable odour trap, sealing water height 22 mm cover with 3 inlaid colorful crystal settings with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg 750 mm 850 mm 950 mm 1150 mm ISL ISL ISL ISL 35 mm mm With installation supports L: 750 / 850 / 950 / 1150 mm 50 With installation supports 60 l/min flow rate without threshold 63 l/min flow rate with 10 mm threshold Shower channel Linearis Comfort Logo with drain body in ABS Ø 50, lateral outlet with removable odour trap, sealing water height 22 mm cover with customized laser engraving of company logos, famous quotes, personal names or emblems, with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg 35 mm 66 mm 60 l/min flow rate without threshold 63 l/min flow rate with 10 mm threshold 104 Catalogue 2.3 Other crystal colours see page mm 850 mm 950 mm 1150 mm ILL ILL ILL ILL

37 Accessories Illustration Article description Channel length Article # Installation aid Replaces the screed underlining Including mounting adhesive Linearis Comfort Suitable for all lengths, can be individually shortened Example: Installation aid can be individually shortened Suitable for all channel lengths from 750 to 1150 mm Collar seal As a seal below the ceramic surfaces made of modified polyethylene membrane with fleece on both sides with printed cutting template suitable for all channel lengths Including mounting adhesive Catalogue

38 Shower channel Linearis Comfort Line Draining System Shower channel upper sections Linearis Comfort L: 750 / 850 / 950 / 1050 / 1150 mm L: 750 / 850 / 950 / 1150 mm 35 mm 35 mm 66 mm 66 mm Shower channel upper section Linearis Comfort in ABS, with removable odour trap, sealing water height 50 mm Cover and rim (Channel cover can be reversed and tiled on site) Class K 3 Shower channel upper section Linearis Comfort Light in ABS, with removable odour trap, sealing water height 50 mm With maintenancefree induction technology and white LED lights (other colours available upon request), 15 m power cable Handles loads up to 100 kg Length 750 mm 850 mm 950 mm 1050 mm 1150 mm 750 mm 850 mm 950 mm 1150 mm Article # S S S S S IC IC IC IC L: 750 / 850 / 950 / 1150 mm With installation supports 35 mm 66 mm Shower channel upper section Linearis Comfort Logo in ABS, with removable odour trap, sealing water height 50 mm With customized laser engraving of company logos, famous quotes, personal names or emblems, with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg 750 mm 850 mm 950 mm 1150 mm ILL ILL ILL ILL Accessories Glue flange with counter flange, Ø 348 mm (also for compound seal) Art. # Pressure sealing flange, Ø 273 mm, Art. # Extension section in PP, with lip seal without lateral inlet Art. # with lateral inlet Art. # Drain bodies Total installation height including upper section min 115 max The Ultraflat in ABS Lateral outlet Ø 50/75, with removable odour trap Lateral outlet Ø 50 Art. # Lateral outlet Ø 75 Art. # The Ultraflat in ABS 106 Catalogue 2.3 Lateral outlet Ø 50, with removable odour trap with lateral inlet Ø 40, lateral outlet Ø 50 Art. # The Vertical in ABS Vertical outlet Ø 50/40 with removable odour trap fits all upper sections System Art. #

39 L: 750 / 850 / 950 / 1150 mm Other crystal colours see page 102 L: 750 / 850 / 950 / 1050 / 1150 mm 35 mm 35 mm 66 mm 66 mm Shower channel upper section Linearis Comfort Crystal in ABS, with removable odour trap, sealing water height 50 mm With 3 inlaid colorful crystal settings with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg Shower channel upper section Linearis Comfort Wengé in ABS, with removable odour trap, sealing water height 50 mm Handles loads up to 100 kg KESSELmodular design Combinations for any installation requirement Length 750 mm 850 mm 950 mm 1150 mm 750 mm 850 mm 950 mm 1050 mm 1150 mm Article # ISL ISL ISL ISL on request on request on request on request on request L: 750 / 850 / 950 / 1050 / 1150 mm With installation supports 35 mm 66 mm Shower channel upper section Linearis Comfort Burlwood in ABS, with removable odour trap, sealing water height 50 mm Handles loads up to 100 kg 750 mm 850 mm 950 mm 1050 mm 1150 mm on request on request on request on request on request Multistop as an odour, foam, rodent and insect stop Art. # Hair filter made of polymer Art. # QuickFit the passage seal for core drilling for drain body Ecoguss and Practicus, vertical outlet without fire protection Art. # B H 135 H 91 Ecoguss with removable odour trap Practicus in PP with removable odour trap Ø Lateral outlet B H Article # Vertical outlet H Article # Ø B Lateral outlet H Article # Vertical outlet H Article # Catalogue

40 80 mm 65 mm Linearis Compact Channel Illustration Article description Article # length 60 mm L: 300/450/550/650/750/850/950/ / 1050 / 1150 mm Ø 50 Installation depth only 80 mm Shower channel Linearis Compact with drain body in ABS Ø 50, lateral outlet with removable odour trap, sealing water height 22 mm cover and rim (Channel cover can be reversed and tiled on site), Class K 3 35 mm 300 mm 450 mm 550 mm 650 mm 750 mm 850 mm 950 mm 1050 mm 1150 mm With installation supports Linearis Compact 30 l/min flow rate without threshold 36 l/min flow rate with 10 mm threshold Ø* Illustration Article description Article # Illustration shows 1 Odour trap 1 sealing water height 22 mm 2 sealing water height 50 mm only for shower channel Linearis Compact and Linearis Comfort Multistop as an odour, foam, rodent and insect stop Hair filter Catalogue 2.3

41 Accessories Illustration Article description Channel length Article # Installation aid Replaces the screed underlining Including mounting adhesive Linearis Compact Suitable for all lengths, can be individually shortened Example: Installation aid can be individually shortened Suitable for all channel lengths from 300 to 1150 mm Collar seal As a seal below the ceramic surfaces made of modified polyethylene membrane with fleece on both sides with printed cutting template suitable for all channel lengths Including mounting adhesive Catalogue

42 mm 69 mm Shower channel Linearis Super60 System Channel Illustration Article description Article # length 60 mm L: 750 / 850 / 950 / 1150 mm 140 mm With installation supports Ø 50 m Shower channel Linearis Super60 in ABS, cover and rim (Channel cover can be reversed and tiled on site) consisting of: shower channel upper section in ABS, with perimeter flange to the shallow bed gasket; with tileable access cover and locking system with bathroom drain body The Ultraflat in ABS, Ø 50, lateral outlet, with removable odour trap, sealing water height 30 mm Class K 3 45 mm 66 l/min flow rate without threshold 72 l/min flow rate with 10 mm threshold 750 mm 850 mm 950 mm 1150 mm KESSELProfessional advantages Shower channel Linearis Super60 Flow rate from 6672 l/min Wide channel with high flow rate Easy cleaning Channel cover can be reversed and tiled on site Lengths 750 / 850 / 950 / 1150 mm Also suitable for installation on door side Unbeatable! Full accesss for maintenance and cleaning Catalogue 2.3

43 mm 69 mm Shower channel Linearis Channel Illustration Article description Article # length 40 mm L: 750 / 850 / 950 / 1150 mm 140 mm Ø 50 m Shower channel Linearis in ABS, cover and rim consisting of: shower channel upper section in ABS, with perimeter flange to the shallow bed gasket; with tileable access cover and locking system with bathroom drain body The Ultraflat in ABS, Ø 50, lateral outlet, with removable odour trap, sealing water height 30 mm Class K 3 40 mm 750 mm 850 mm 950 mm 1150 mm With installation supports 24 l/min flow rate with 10 mm threshold KESSELProfessional advantages Shower channel Linearis Flow rate 24 l/min Extremely narrow and elegant channel Easy cleaning Particularly suitable for installation on the wall side Access opening can be tiled Lengths 750 / 850 / 950 / 1150 mm Full accesss for maintenance and cleaning Catalogue

44 Shower channel Linearis Super60 and Linearis Line Draining System Shower channel upper sections Linearis Super60 60 mm 60 mm L: 750 / 850 / 950 / 1150 mm 140 mm L: 750 / 850 / 950 / 1150 mm 140 mm 45 mm 45 mm Shower channel upper section Linearis Super60 in ABS, with tileable access cover Cover and rim (Channel cover can be reversed and tiled on site) Class K 3 Shower channel upper section Linearis Super60 Light in ABS, with tileable access cover With maintenancefree induction technology and white LED lights (other colours available upon request), 15 m power cable Handles loads up to 100 kg Length 750 mm 850 mm 950 mm 1150 mm 750 mm 850 mm 950 mm 1150 mm Article # IC IC IC IC 60 mm L: 750 / 850 / 950 / 1150 mm 140 mm With installation supports Shower channel upper section Linearis 45 mm Shower channel upper section Linearis Super60 Logo in ABS, with tileable access cover With customized laser engraving of company logos, famous quotes, personal names or emblems, with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg 750 mm 850 mm 950 mm 1150 mm on request on request on request on request 40 mm L: 750 / 850 / 950 / 1150 mm 140 mm 40 mm Accessories Glue flange with counter flange, Ø 348 mm (also for compound seal) Art. # Pressure sealing flange, Ø 273 mm, Art. # Extension section in PP, with lip seal without lateral inlet Ø 50 Art. # with lateral inlet Ø 50 Art. # Drain bodies l/sec flow rate Sealing water height 30 mm Ø l/sec flow rate Sealing water height 30 mm 1.2 l/sec flow rate Sealing water height 50 mm 69 Ø Ø The Ultraflat in ABS Lateral outlet Ø 50/75, with removable odour trap Lateral outlet Ø 50 Art. # Lateral outlet Ø 75 Art. # The Ultraflat in ABS 112 Catalogue 2.3 Lateral outlet Ø 50, with removable odour trap with lateral inlet Ø 40, lateral outlet Ø 50 Art. # The Vertical in ABS Vertical outlet Ø 50/40 with removable odour trap fits all upper sections System Art. #

45 60 mm L: 750 / 850 / 950 / 1150 mm 140 mm Other crystal colours see page mm L: 750 / 850 / 950 / 1150 mm 140 mm 45 mm 45 mm Shower channel upper section Linearis Super60 Crystal in ABS, with tileable access cover With 3 inlaid colorful crystal settings with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg Shower channel upper section Linearis Super60 Wengé in ABS, with tileable access cover Handles loads up to 100 kg KESSELmodular design Combinations for any installation requirement Length 750 mm 850 mm 950 mm 1150 mm 750 mm 850 mm 950 mm 1150 mm Article # ISL ISL ISL ISL IW IW IW IW 60 mm L: 750 / 850 / 950 / 1150 mm 140 mm With installation supports 45 mm Shower channel upper section Linearis Super60 Burlwood 750 mm in ABS, with tileable access cover 850 mm Handles loads up to 100 kg 950 mm 1150 mm IH IH IH IH Shower channel upper section Linearis in ABS, with tileable access cover Cover and rim Class K 3 Length 750 mm 850 mm 950 mm 1150 mm Article # Multistop as an odour, foam, rodent and insect stop Art. # All drain bodies: 1.8 l/sec flow rate Sealing water height 50 mm Ecoguss with removable odour trap Ø B Hair filter Lateral outlet H Article # made of polymer Art. # FireKit Fire protection insert Ø 76 mm, Only for Ecoguss / Practicus drains with vertical outlet and odour trap Art. # Vertical outlet H Article # B H Certification no. Z Practicus in PP with removable odour trap Ø Catalogue 2.3 H QuickFit the passage seal for core drilling for drain body vertical outlet with fire protection Art. # without fire protection Art. # B Lateral outlet H Article # Certification no. Z Vertical outlet H Article #

46 mm 80 mm mm 90 mm Linearis System 100 Channel Illustration Article description Article # length 40 mm L: 750 / 850 / 950 / 1150 mm 140 mm Ø 50 Shower channel Linearis in ABS, cover and rim consisting of: shower channel upper section in ABS, with perimeter flange for waterproof barrier connection; with tileable access cover and locking system with bathroom drain body Classic in ABS, Ø 50, lateral outlet, Class K 3 40 mm 750 mm 850 mm 950 mm 1150 mm With installation supports 24 l/min flow rate with 10 mm threshold 40 mm Shower channel Linearis in ABS, cover and rim consisting of: shower channel upper section in ABS, with perimeter flange for waterproof barrier connection; with tileable access cover and locking system with bathroom drain body The Superflat in PP, soundabsorbing, Ø 50, flexible lateral outlet, 1 inlet Ø 40, Class K mm 850 mm 950 mm 1150 mm L: 750 / 850 / 950 / 1150 mm 140 mm 40 mm Ø 50 With installation supports Access opening can be tiled. 24 l/min flow rate with 10 mm threshold 114 Catalogue 2.3

47 Shower channel Linearis Line Draining System 100 Shower channel upper section Linearis KESSELmodular design Combinations for any installation requirement 40 mm L: 750 / 850 / 950 / 1150 mm 140 mm 40 mm Shower channel upper section Linearis in ABS, with tileable access cover Cover and rim Class K 3 Length 750 mm 850 mm 950 mm 1150 mm Article # Accessories Glue flange with counter flange (also for compound seal) Art. # Elastomer waterproof membrane in PVC Art. # in EPDM Art. # Extension section in PP, with pressure sealing flange, flange width 63 mm Art. # mm Extension section in ABS, with glue flange and counter flange Art. # The waterproof membrane in PVC and EPDM are not suitable for connections to asphalt sheeting. With glue flange and waterproof membrane premounted in PVC 1200 x 1200 mm Art. # x 2000 mm Art. # Waterproof membrane in PVC without punchedout hole 1800 x 2000 mm Art. # Glue Art. # Extension section in ABS, with lip seal Art. # Multistop as an odour, foam, rodent and insect stop Art. # Hair filter made of polymer, Ø 108 mm Art. # Transition section with sealing ring Ø 50 Ø 50/75 Art. # Ø 50/40 Art. # Drain bodies *) according to EN 3 20 mm threshold Bathroom drain Classic in ABS Ø l/sec flow rate *) Sealing water height 50 mm with removable odour trap Lateral outlet Art. # Art. # Vertical outlet Art. # Art. # Ø156 Ø Ø 65 Ø Ø156 Ø129 Ø without removable odour trap Lateral outlet Art. # Art. # Vertical outlet Art. # Art. # Bathroom drain The Superflat in PP Lateral outlet Ø 50, with removable odour trap Without lateral inlet Art. # One lateral inlet Ø 40 Art. # l/sec flow rate *) Sealing water height 30 mm Three lateral inlets Ø 40 Art. # Catalogue

48 116 Catalogue 2.3

49 with/without backwater protection Ideal for waterproof concrete Catalogue

50 Professional advantages KESSEL: The functional Basement drain The Universal Basement drain Drehfix Variable upper section With twin flap backwater valve Flexible options for installation in watertight cellars Ideal for renovation! Low installation height only 30 mm coverage Installation in waterproof basements Safe sealing against pressing water with special gasket set. Alternative seal with shallow bed upper section Art. # Handlockable emergency closure Ideal for waterproof concrete With twin flap backwater valve and odour trap Handlockable emergency closure (Visual control without removing the cover). Toolfree maintenance: Fast and simple cleaning with onehand quickrelease fastener. 1. Variable upper section for stepless installation in concrete slabs: rotatable tiltable height adjustable 2. Stepless installation with extension section Art. # Toolfree maintenance. Fast and simple cleaning with onehand quickrelease fastener. Three lateral inlets Three lateral inlets ( 2 x Ø 50 and 1 x Ø 75) are attached as standard. Inlets that are not needed are closed with special socket plugs. Height adjustable upper section Products see page 120 Products see page Catalogue 2.3

51 and technical allrounder Compact basement drains with volatile liquid trap Variable upper section For various requirements The practical and economical alternative with or without twin flap backwater valve Variable upper section Secure against leaking heating oil The odour trap also acts as sludge trap. It can be simply removed via the handle for easy cleaning. Pressureproof and sturdy cellar drain Deeper installation with extension section to compensate the level (Installation height extension by 80 mm). Variable upper section Frostproof material The ideal solution as a basement stairwell drain Installation in waterproof basements Safe sealing against pressing water with special gasket set. Variable upper section for stepless installation in concrete slabs: rotatable tiltable height adjustable Sealed against ground moisture With extension section and counterflange Art. # Ideal for waterproof concrete Variable upper section for stepless installation in concrete slabs: rotatable tiltable height adjustable Extensive accessories program For subsequent retrofitting and deeper installation, e.g. Multistop Alternative seal With shallow bed upper section Art. # Twin flap backwater valve can also be retrofitted. Fast and simple cleaning with onehand quickrelease fastener. Products see page 122 Products see page 123 Catalogue

52 Basement drain The Universal made of polymer Ø with/without twin flap backwater valve and odour trap For interior installation according to EN 3 Illustration and dimensioned drawing D Ideal for new buildings! Variable upper section Art. # Installation area 400 x 320 mm * Ø = Outer Diameter Accessories Article description Basement drain The Universal with/without twin flap backwater valve and odour trap in PP, Ø Lateral outlet 2.5, 1.8 l/sec flow rate With 2 inlets Ø 50, 1 inlet Ø 75. With/without removable twin flap backwater valve and emergency closure which can be locked by hand. Odour trap height 60 mm, with removable sludge trap. With telescopically height adjustable upper section made of polymer 1 slotted cover 200 x 200 mm made of polymer, black. Installation depth (D) mm 2 slotted cover 200 x 200 mm and rim, screwed. Installation depth (D) mm Class L 15 (able to withstand loads up to max. 1.5 to). EN 3 LGA Typetested and monitored guaranteed with tested quality According to EN Type 5 With twin flap backwater valve: 1 2 Ø Ø Without twin flap backwater valve: 1 2 Ø* Ideal waterproof concrete for Article # Ø Ø Variofix shallow bed upper section in ABS with slotted cover and rim 200 x 200 mm, screwed, Class L Upper section with support rim in Ecoguss with round slotted cover in Ecoguss Ø 235 mm with Lock & Lift System, Class B (able to withstand loads up to max to) Sealed with respect to floor moisture For installation in waterproof concrete Extension section in ABS with pressure sealing flange and counter flange H = 150 mm Extension section in Ecoguss with pressure sealing flange and counter flange H = 166 mm + Elastomer waterproof membrane in NBR Ideal waterproof concrete for Extension section in ABS H = 175 mm, with lip seal 120 Catalogue Rodent protection

53 Basement drain Drehfix made of polymer Ø with/without twin flap backwater valve and odour trap For interior installation according to EN 3 Illustration and dimensioned drawing Article description Ø* Article # Ideal for renovation! min. 25 max. 55 D x Art. # Installation area 320 x 190 mm Accessories 210 x x Basement drain Drehfix with/without twin flap backwater valve and odour trap in ABS, Ø lateral outlet 2.5, 1.8 l/sec flow rate With/without removable twin flap backwater valve and emergency closure which can be locked by hand. With odour trap. With removable sludge trap and integrated, height adjustable upper section. with slotted cover 150 x 190 mm made of polymer, black, with Easy Entry Function. Class K 3 (able to withstand loads up to max. 300 kg). Installation depth (D) mm. According to EN Type 5. EN 3 LGA Typetested and monitored guaranteed with tested quality Extension section made of polymer black H = 183 mm With twin flap backwater valve: Ø Without twin flap backwater valve: Ø x 148 Art. # Inlet sections made of polymer incl. flat seal Ø 50 Ø 75 Ø Hole saw for drilling lateral surfaces for inlets and outlets Ø 50, 75, (Saw blade holder Ø = 145 mm) Rodent protection * Ø = Outer Diameter Transition section Ø / 75 for article numbers: , , , , , , Ø 75 / Ø Catalogue

54 made of polymer Ø 75 / Ø with/without odour trap For interior installation according to EN 3 Illustration and dimensioned drawing Art. # Art. # Installation area 220 x 280 mm Accessories * Ø = Outer Diameter Accessories min. 20 max Installation area 220 x 180 mm Article description Basement drain in PP, Ø Lateral outlet 2.5, 1.6 l/sec flow rate With removable odour trap and sludge trap. With upper section in PP with slotted cover 150 x 150 mm made of polymer, black. Class K 3 (able to withstand loads up to max. 300 kg). EN 3 Extension section made of polymer Can be extended by 80 mm Odour trap insert with integrated sludge trap Ø* Article # Ø Basement drain in PP, Ø..., lateral outlet 2.5 /vertical 1.8 l/sec flow rate Lateral outlet With odour trap: Ø With/without removable odour trap. Without odour trap: With lip seal and protective cover for use during construction. Ø With upper section in ABS Vertical outlet with slotted cover 138 x 138 mm in ABS, black. With odour trap: Class K 3 (able to withstand loads up to max. 300 kg). Ø Installation dimensions of vertical drain body see page 80 Without odour trap: EN 3 LGA Typetested and monitored guaranteed with tested quality LGA Typetested and monitored guaranteed with tested quality Multistop as an odour, foam, rodent and insect stop Hair filter made of polymer Ø Glue flange with counter flange for Art. # , , , Pressure sealing flange + Elastomer waterproof membrane in NBR Ideal waterproof concrete for Extension section in ABS with lip seal without lateral inlet Bellshaped odour trap insert 50 mm seal water height Sludge trap Catalogue 2.3

55 Volatile liquid traps made of polymer Ø with/without twin flap backwater valve For interior installation according to EN 33 and 5 / EN Type 5 Illustration and dimensioned drawing with twin flap backwater valve min. 30 max. 90 D Installation area 400 x 250 mm Variable upper section without twin flap backwater valve D min. 30 max Installation area 400 x 250 mm * Ø = Outer Diameter Variable upper section Article description Volatile liquid trap made of polymer, Ø 1.0 l/sec flow rate With twin flap backwater valve according to EN Type 5. With integrated odour trap and sludge trap. with slotted cover made of polymer, black. Installation depth (D) mm Class K 3 (able to withstand loads up to max. 300 kg). According to EN Type 5 EN 33 and 5 Volatile liquid trap made of polymer, Ø 1.0 l/sec flow rate With integrated odour trap and sludge trap. with slotted cover made of polymer, black. Installation depth (D) mm Class K 3 (able to withstand loads up to max. 300 kg). EN 33 and 5 LGA Typetested and monitored guaranteed with tested quality Ø* Article # Ø Ø KESSELProfessional advantages Easy installation with adjustable upper section (vertically and laterally adjustable) Sealing gasket between extension section and flange Article # (prevents floor moisture damage) Waterproofing seal Article # Ideal for waterproof concrete Cast iron cover handles higher loads up to 12.5 tons (load class B) Article # Upgradable to twin flap backwater valve Quick and easy cleaning with onehand locking clasp Catalogue

56 Backwater pumping station Pumpfix S Basement drain Ø with twin flap backwater valve and pump For interior installation according to EN 3 Illustration and dimensioned drawing D Ideal for new buildings! Variable upper section Article description Backwater pumping station Pumpfix S with twin flap backwater valve and pump For wastewater without sewage made of polymer, Ø Lateral outlet 2.5, 1.6 l/sec flow rate For installation in a concrete slab/floor for installation depth (D) from mm With removable pump, twin flap backwater valve and odour trap. Twin flaps, selfclosing, one of which can be locked by hand, self activating pump during backwater. With telescopic upper section for free height and level adjustments recessed cover for onsite tiling, Class A 15, made of polymer. With moisture protective sealing flange. Not for use as a lifting station. Pumping height m [m] 8, ,0 6,0 5,0 4,0 3,0 2,0 1,0 Ø* Article # Ø Installation area 700 x 700 mm * Ø = Outer Diameter According to EN Type 5 EN 3 LGA Typetested and monitored guaranteed with tested quality 0, [Qm 3 /h] Pumping capacity Q (m 3 /h) 0,0 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 124 Catalogue 2.3 Ideal for waterproof concrete KESSELProfessional advantages Ideal for waterproof concrete Vertically adjustable upper section for stepless installation in concrete slabs: Rotatable, tiltable, vertically adjustable Installation in waterproof concrete. Gasket set to prevent groundwater infiltration. Elegant optical appearance due to recessed cover for onsite tiling Perfect for drainage of outdoor basement access steps with additional inlet connections Wastewater discharging even during backwater

57 Drains and drainage channels Catalogue 2.3

58 Professional advantages Quality drains Point drains System / 200 Ferrofix With all seal types With connection flange With pressure sealing flange With twin sealing flanges Easy installation variable upper section: rotatable, tiltable, height adjustable Easy maintenance thanks to removable odour trap. Fire kits FireKit 100 and FireKit 200 simple retrofitting! Only use in vertical stainless steel drains which already have an odour trap. Design covers made of solid stainless steel and recessed covers for onsite tiling for a modern bathroom design Our design covers received the red dot award for high design quality in the Product Design category Bellshaped odour trap insert in PP removable, sealing water height 70 mm, standard in the body FireKit 200 Fire protection insert can only be retrofitted for vertical drains Art. # Components System Page Design the drain you need: Upper section Load class M With a stainless steel cover 290 mm, Art. # Drain body floor drain Ferrofix Vertical outlet Ø Standard with removable plastic odour trap. Art. # Components System 200 Page Products System see from page 128 Products System 200 see from page Catalogue 2.3

59 for food commercial applications Point and Line Draining Ferrofix System / 200 Drainage channels Ferrofix Express System on stock With adhesive edge for shallow bed seals Linear Drainage channels Express made from Ferrofix Complete drainage channel with adhesive edge, sludge trap optional Square drainage channels Express made from Ferrofix Complete drainage channel with adhesive edge, sludge trap optional Channel widths: 158 and 300 mm Channel length: 1042, 1550, 2058 mm and 1047, 1550, 2063 mm Including stainless steel cover, nonslip, Class L 15 Channel width: 500 mm Channel length: 500 and 953 mm Including stainless steel cover, nonslip, Class L 15 Cover (498 mm), can also be placed in the dishwasher Products System see page 138 Design your own drainage channel Drainage channel Ferrofix Individual channel lengths and widths on request. Large selection of covers Class K, L and M Welded version Permanently tight even if subject to continuous expansion loads caused by temperature fluctuation. Products System 100//200 see from page 139 Customised channel lengths on request. Large selection of covers Class K, L and M for gully upper section. Easy cleaning: After removing the mud trap (optional), all inner walls and sloped surfaces need to be cleaned with the steam jet. Catalogue 2.3 Slotted channel Ferrofix 127

60 Floor drains Ferrofix For interior installation according to EN 3 System Illustration and dimensioned drawing Article description Ø* Article # Illustration shows 1 with connection flange min. 35 max. 75 Floor drain Ferrofix Vertical outlet, 1.8 l/sec flow rate With removable odour trap, Sealing water height 50 mm. With upper section in ABS 1 with slotted cover 138 x 138 mm and rim, screwed, nonslip, Class L 15 2 with slotted cover 138 x 138 mm and rim, screwed, Class L 15 With upper section 3 with slotted cover 138 x 138 mm and rim, screwed, Class K Ø 78 Ø Ø 78 Ø Ø 78 Ø Installation area 180 x 180 mm EN 3 LGA Typetested and monitored guaranteed with tested quality with connection flange 78: 145 : : : min. 35 max : 106 : Floor drain Ferrofix Lateral outlet, 1.8 l/sec flow rate With removable odour trap, Sealing water height 50 mm. With upper section with slotted cover 138 x 138 mm, screwed, Class K 3 Ø 78 Ø Installation area 220 x 180 mm EN 3 LGA Typetested and monitored guaranteed with tested quality Illustration shows 1 with pressure sealing flange Installation area 180 x 180 mm with pressure sealing flange 78: 142 : Installation area 220 x 180 mm * Ø = Outer Diameter SML pipe connection dimension acc. to DIN : : min. 35 max. 75 min. 35 max : 103 : 107 Floor drain Ferrofix Vertical outlet, 1.8 l/sec flow rate With removable odour trap, Sealing water height 50 mm. With upper section in ABS 1 with slotted cover 138 x 138 mm and rim, screwed, nonslip, Class L 15 With upper section 2 with slotted cover 138 x 138 mm and rim, screwed, Class K 3 EN 3 LGA Typetested and monitored guaranteed with tested quality Floor drain Ferrofix Lateral outlet, 1.8 l/sec flow rate With removable odour trap, Sealing water height 50 mm. With upper section with slotted cover 138 x 138 mm, screwed, Class K 3 EN 3 LGA Typetested and monitored guaranteed with tested quality 1 2 Ø 78 Ø Ø 78 Ø Ø 78 Ø Catalogue 2.3

61 Accessories / Components Floor drains Ferrofix System Illustration and dimensioned drawing Article description Ø* Article # 40 78: 145 : : 142 : : : : : : 106 : 78: 103 : Drain bodies Ferrofix in stailess steel with removable odour trap Lateral outlet Vertical outlet in combination with FireKit Drains with lateral inlet available upon request Drain bodies Ferrofix in stailess steel with pressure sealing flange, with removable odour trap Lateral outlet Vertical outlet in combination with FireKit Drains with lateral inlet available upon request Variofix shallow bed upper section in ABS with slotted cover 138 x 138 mm and rim, screwed, Class L 15 fits all drain bodies System Ø 78 Ø Ø 78 Ø Ø 78 Ø Ø 78 Ø Variofix shallow bed upper section in ABS with design cover Kessel 120 x 120 mm and rim in stainless steel, with Lock & Lift System, Class L 15 fits all drain bodies System Variofix shallow bed upper section in ABS with design cover Oval 120 x 120 mm and rim in stainless steel, with Lock & Lift System, Class L 15 fits all drain bodies System Variofix shallow bed upper section in ABS with recessed polymer cover for onsite tiling x mm, and rim, with locking system, Class K 3 fits all drain bodies System Variofix shallow bed upper section in ABS with slotted cover 138 x 138 mm and rim, nonslip, screwed, Class L 15 fits all drain bodies System * Ø = Outer Diameter Variofix shallow bed upper section in ABS with antislip drain cover 138 x 138 mm and rim in stainless steel, nonslip, Class L 15 fits all drain bodies System Catalogue

62 Accessories / Components Floor drains Ferrofix System Illustration and dimensioned drawing Article description Ø* Article # Upper section with antislip drain cover 138 x 138 mm, Class L 15 / M fits all drain bodies System Upper section with slotted cover 138 x 138 mm, screwed, Class K 3 fits all drain bodies System Upper section in ABS with design cover Oval 120 x 120 mm and rim in stainless steel, with Lock & Lift System, Class L 15 fits all drain bodies System Upper section in ABS with design cover Kessel 120 x 120 mm and rim in stainless steel, with Lock & Lift System, Class L 15 fits all drain bodies System Upper section in ABS with recessed polymer cover for onsite tiling x mm and rim made of polymer, with locking system, Class K 3 fits all drain bodies System Upper section in ABS with recessed polymer cover for onsite tiling x mm and rim, with locking system, Class K 3 fits all drain bodies System Upper section in ABS with slotted cover 138 x 138 mm and rim, nonslip, screwed, Class L 15 fits all drain bodies System Upper section in ABS with slotted cover 138 x 138 mm and rim, screwed, Class L 15 fits all drain bodies System Upper section in ABS with slotted cover 138 x 138 mm, screwed, Class K 3 fits all drain bodies System * Ø = Outer Diameter Upper section in ABS with slotted cover 120 x 120 mm, Class K 3 fits all drain bodies System Catalogue 2.3

63 Accessories / Components Floor drains Ferrofix System Illustration and dimensioned drawing Article description Ø* Article # Extension section in PP, with lip seal Multistop odour, foam, rodent and insect stop Sludge trap Extension section , with pressure sealing flange, Flange width 70 mm, Ø 273 mm Extension section , with pressure sealing flange, Side inlet with plugin sleeve Ø 50/40. Flange width 70 mm, Ø 273 mm Odour trap sealing water height 50 mm 2 made of polymer sealing water height 50 mm Certification no. Z FireKit Fire protection insert Can only be retrofitted for vertical drains Only use in combination with an odour trap QuickFit the passage seal for core drilling for drain body vertical outlet 1 with fire protection Certification no. Z without fire protection * Ø = Outer Diameter Sludge trap fits all drain bodies Ferrofix System Catalogue

64 Floor drains Ferrofix For interior installation according to EN 3 System 200 Illustration and dimensioned drawing Article description Ø* Article # Illustration shows 1 with connection flange min. 35 max. 80 Floor drain Ferrofix Vertical outlet, 2.0 l/sec flow rate With removable odour trap With upper section 1 with antislip drain cover 190 x 190 mm, Class L / M 2 with slotted cover 190 x 190 mm, Class M 3 with roundslot cover plate 190 x 190 mm, nonslip, Class M Ø Ø Ø Installation area 300 x 300 mm EN 3 LGA Typetested and monitored guaranteed with tested quality with connection flange min. 12 max. 25 min. 30 max. Floor drain Ferrofix Vertical outlet, 2.0 l/sec flow rate with shallow bed gasket With removable odour trap With shallow bed upper section made of polymer with slotted cover 200 x 200 mm and rim, screwed, nonslip, Class L 15 Ø Installation area 300 x 300 mm EN 3 LGA Typetested and monitored guaranteed with tested quality with pressure sealing flange min. 50 max. 80 Floor drain Ferrofix Vertical outlet, 2.0 l/sec flow rate With removable odour trap With upper section 1 with antislip drain cover 190 x 190 mm, nonslip, Class L / M 2 with slotted cover 190 x 190 mm, Class M 1 2 Ø Ø Illustration shows 1 Installation area 450 x 450 mm with pressure sealing flange Installation area 450 x 450 mm * Ø = Outer Diameter min. 12 max. 25 min. 30 max. EN 3 LGA Typetested and monitored guaranteed with tested quality Floor drain Ferrofix Vertical outlet, 2.0 l/sec flow rate With removable odour trap With shallow bed upper section made of polymer with slotted cover 200 x 200 mm and rim, screwed, nonslip, Class L 15 EN 3 LGA Typetested and monitored guaranteed with tested quality Ø Catalogue 2.3

65 Accessories / Components Floor drains Ferrofix System 200 Illustration and dimensioned drawing Article description Ø* Article # Drain bodies Ferrofix in stailess steel with connection flange, with removable odour trap Lateral outlet Vertical outlet in combination with FireKit Drain bodies Ferrofix in stailess steel mit pressure sealing flange, with removable odour trap Lateral outlet Vertical outlet in combination with FireKit Ø Ø Ø Ø Drain body Ferrofix in stailess steel with connection flange, with removable odour trap Lateral outlet With low drain height Drain body Ferrofix in stailess steel mit pressure sealing flange, with removable odour trap Lateral outlet With low drain height Ø Ø von 12 bis 25 Variofix shallow bed upper section in ABS with slotted cover 200 x 200 mm and rim, nonslip, screwed, Class L 15 fits all drain bodies System Variofix shallow bed upper section in ABS with antislip drain cover 190 x 190 mm, nonslip, Class L 15 fits all drain bodies System Upper section with antislip drain cover 190 x 190 mm, nonslip, Class M fits all drain bodies System 200 Upper section with slotted cover 190 x 190 mm, Class M fits all drain bodies System * Ø = Outer Diameter Upper section with roundslot cover plate 190 x 190 mm, nonslip, Class M fits all drain bodies System Catalogue

66 82 Accessories / Components Floor drains Ferrofix System 200 Illustration and dimensioned drawing Article description Ø* Article # Upper section with antislip drain cover 290 x 290 mm, nonslip, Class M fits all drain bodies System Upper section with slotted cover 290 x 290 mm, Class M fits all drain bodies System 200 Upper section with roundslot cover plate 290 x 290 mm, nonslip, Class M fits all drain bodies System Ø Extension section in PP, with lip seal Extension section with pressure sealing flange with connection flange Odour trap , removable, sealing water height 70 mm Bellshaped odour trap insert in PP, removable, sealing water height 100 mm Certification no. Z FireKit 200 Fire protection insert Can only be retrofitted for vertical drains Only use in combination with an odour trap Sludge trap Height 60 mm Height 150 mm * Ø = Outer Diameter Sludge trap in PEHD Catalogue 2.3

67 Components Floor drains Ferrofix System Illustration and dimensioned drawing Article description Ø* Article # Bellshaped odour trap insert in PP sealing water height 50 mm Lip seal Use for rising damp (backwater) Components Floor drains Ferrofix System 200 Illustration and dimensioned drawing Article description Ø* Article # Bellshaped odour trap insert in PP removable, sealing water height 70 mm Holding ring Use for specified drainage of seepage water Lip seal Use for rising damp (backwater) * Ø = Outer Diameter Catalogue

68 Individual solutions Drains Ferrofix Customised solutions for low profile floor surface applications (15 mm)* Ferrofix stainless steel drains When planning renovations, specialists often face the problem of using products in very shallow floor structures that still meet the sealing requirements. As a customer, describe your installation situation and we will make a Ferrofix that is precisely tailored to your requirements. Just ask us! A wide range of customised solutions are possible using the KESSEL Ferrofix stainless steel drains: Floor structures up to a minimum height of 15 mm are possible, even with an adhesive edge for the compound seal Materials in various variants can be selected Choice of cover forms and sizes Example: Tiled floor 15 mm *) If the flange is stuck 3 mm into the concrete, a structural height of 15 mm is possible, provided that the socket of the PVC pipe is at least 3 mm below the upper edge of the concrete. Moisture seal Concrete floor slab 250 mm 136 Catalogue 2.3

69 Individual solutions Upper sections Ferrofix Illustration Article description Cover mm Connection Ø Article # Upper section in ABS, with a closed cover made of stainless steel, screwed, without gasket Class K x G Upper section in ABS, with rim and a closed cover made of stainless steel, screwed, without gasket Class L x x G G Upper section, with a closed cover made of stainless steel, screwed, without gasket Class K 3 Upper section, with a closed cover made of stainless steel, screwed odourtight, with a backwaterproof seal up to 0.5 bar, Class L x x x x x PL PL PL PL PL Illustration Article description Cover mm Connection Ø Article # Upper section with glue flange and a closed cover made of stainless steel, screwed, without gasket Class K x x PLKF PLKF Upper section with glue flange and a closed cover made of stainless steel, screwed odourtight, with a backwaterproof seal up to 0.5 bar, Class L x x PLKF PLKF Upper section with glue flange and stainless steel cover, Class L 15 / M 150 x x x x KF KF KF KF Catalogue

70 Drainage channels Ferrofix Express System Illustration and dimensioned drawing Linear stainless steel channel drains System L W Article description Drainage channels Ferrofix made of stainless steel Material thickness 2.0 mm acidtreated in a pickling bath, visible cover sanded, with longitudinal and transverse slopes, feet for height adjustment, with welded distance grates to secure the covers, including drain pipes. Channel profile for shallow bed seals, with adhesive edge 15 mm deep and 30 mm turned down allround to the outside, with welded mitre joints. Material (V2A) Channel profile Adhesive edge for shallow bed seals With stainless steel cover Nonslip R11, acidtreated in a pickling bath. Mesh width: 23 x 23 mm Load class: L 15 (1.5 ton.) H Sludge trap optional: System Art. # 6 SKH Construction height 90 mm Art. # 6 SKN Construction height 30 mm Square/rectangular stainless steel channel drains System On stock: Dimensions W x L x H Article # Linear stainless steel channel drains System L H 158 x 1042 x 55 mm 158 x 1550 x 58 mm 158 x 2058 x 60 mm 300 x 1047 x 60 mm 300 x 1555 x 63 mm 300 x 2063 x 65 mm Square/rectangular stainless steel channel drains System W 500 x 500 x 65 mm 500 x 953 x 70 mm Accessories Drain bodies with removable odour trap Ecoguss see page 126 Practicus see page 127 Ferrofix see page 167 FireKit Fire protection insert Ø 76 mm, only for drains with vertical outlet and odour trap Art. # Catalogue Matching drain body System optionally as an accessory Certification no. Z Certification no. Z QuickFit the passage seal for core drilling for drain body vertical outlet 1 with fire protection Art. # without fire protection Art. #

71 Box channel / floor sump tray Ferrofix Illustration and dimensioned drawing LA2 h Uprofile LA Profile adhesive edge Profile tile connector Article description Box channel Ferrofix made of stainless steel Material thickness 2.0 mm acidtreated in a pickling bath, visible cover sanded, with longitudinal and transverse slopes, feet for height adjustment, with welded distance grates to secure the covers Including drain pipes Channel widths from 150, 200, 250 etc. to 1000 mm Channel lengths from 400 mm Channel shapes straight Lshaped Ushaped Tshaped Grating(s) Mitre joint(s) Channel profiles Uprofile Adhesive edge for shallow bed seals (compound seals) Tile connector to protect the tiles from breaking at the edge (all profiles also available with hollowfree filling of the visible covers) Drain pipes System 100 (DA mm) System (DA mm) System 200 (DA 200 mm) (depends on channel width) Material (V2A) (Material or V4A on request) Matching drain body and accessories System see from page 129 System 200 see from page 133 Sludge trap optional: System 100 Art. # 6100 SKH construction height 90 mm System Art. # 6 SKH construction height 90 mm System 200 Art. # 6200 SKN construction height 55 mm All sludge traps also available in special sizes Covers Cover Rod cover Nonslip R 11, acidtreated in pickling bath Mesh width 23 x 23 mm or 30 x 30 mm Class L 15 or M Not antislip, acidtreated in pickling bath Rod clearance 18 mm, supporting member 25 x 8 mm, class M Slab cover Not antislip, glass beadblasted Allround 8 mm inlet Material thickness 10 mm, class M Bathroom cover Suitable for barefoot area Brushed surface, perforation 8 x 8 mm Insertion depth 25 mm, thickness 2 mm Class K 3 Ribbed plate cover Bathroom cover made of polymer Nonslip R 11, acidtreated in pickling bath Allround 8 mm inlet Material thickness 10 mm, class M Suitable for barefoot area, With rounded or flat upper profile Colours white, grey, beige or yellow (other RAL colours on request) Insertion depth 25 mm, class K 3 Catalogue

72 Slotted channel Ferrofix Illustration and dimensioned drawing Article description Slotted channel Ferrofix made of stainless steel Material thickness 2.0 mm acidtreated in pickling bath, visible covers sanded, with longitudinal and transverse slopes, feet for height adjustment, including gully, drain pipes. Channel widths 60 mm, 48 mm Slot widths 20 mm (standard width), 8 mm (barefoot area) Channel lengths from 600 mm Channel shapes and gully straight with gully on the edge of the channel Type 100 straight with gully in the middle Type 200 Lshaped with gully in the intersection Type 250 Tshaped with gully in the intersection Type 300 Crossshaped with gully in the intersection Type 400 Channel profiles Uprofile Adhesive edge for shallow bed seals (compound seals) Tile connector to protect the tiles from breaking at the edge (all profiles also available with hollowfree filling of the visible covers) Gully with drain pipes System 100 (DA mm) System (DA mm) System 200 (DA 200 mm) (depends on the gully width) Material (V2A) (Material or V4A on request) Matching drain body and accessories System see from page 129 System 200 see from page 133 Sludge trap optional: System 100 Art. # 6100 SKH construction height 90 mm System Art. # 6 SKH construction height 90 mm System 200 Art. # 6200 SKN construction height 55 mm LA2 h Uprofile LA Profile adhesive edge Tile connector profile All sludge traps also available in special sizes Covers Cover Rod cover Slab cover Nonslip R 11, acidtreated in pickling bath Mesh width 23 x 23 mm or 30 x 30 mm Class L 15 or M Not antislip, glass beadblasted Allround 8 mm inlet Material thickness 10 mm, class M Bathroom cover Not antislip, acidtreated in pickling bath Rod clearance 18 mm, supporting member 25 x 8 mm, class M Suitable for barefoot area Brushed surface, perforation 8 x 8 mm Insertion depth 25 mm, thickness 2 mm Class K 3 Ribbed plate cover Bathroom cover made of polymer Nonslip R 11, acidtreated in pickling bath Allround 8 mm inlet Material thickness 10 mm, class M 140 Catalogue 2.3 Suitable for barefoot area, With rounded or flat upper profile Colours white, grey, beige or yellow (other RAL colours on request) Insertion depth 25 mm, class K 3

73 Parking deck drains Balcony drains / Roof drains Gutter drains / Yard drains Street gullies Catalogue

74 Professional advantages The compact drains with the big Parking deck drains made of Ecoguss Ecoguss or polymer flatroof drains With pressure sealing flange Handles loads up to 12.5 t Single piece pipe connection drain Metallic compound material The properties of metal, yet corrosionfree and nonconductive. with / without heating System 200 in Ecoguss For small areas System 100 made of polymer Ecoguss the new hightech material Corrosion free and sound dampening material for elevated sound protection according to DIN 4109 <30dB(A) High shatter resistance and high load resistance Parking deck drains carry Class B rating (12.5 ton loads). High flow performance exceeds regulatory norm requirements Resistant to high temperatures up to 400 C (shortterm) QuickFit the allround seal for core drillings with approval Z Minimised core drillings Ø 160 mm 2/3 costsaving Additional sound insulation and smoketight closure between core drilling and the outlet. Lowcost and fast installation Fire and smoke protection FireKit with approval Z Optional for drain bodies with vertical outlet. Only use in combination with odour trap! High temperatureresistant materials Briefly up to 400 C, for processing with hot bitumen acc. to DIN Easy installation also upgradable after installation to emergency drainage option Full selection of accessories to meet all installation requirements Available in Ø 75, Ø and Ø Lock & Lift System no tools required With integrated heating low energy consumption Multistop 200 as an odour, foam, rodent and insect protection (Waterless odour trap) Electrical grounding no longer necessary. Products see page Catalogue 2.3 Products see pages 146 and 147

75 applications for yard / roof drainage Parking deck / Balcony / Roof / Gutter and Yard drains Polymer gutter drains Ecoguss or polymer yard drains The concrete alternative! NEW! Upper section in Ecoguss NEW! Yard drain in Ecoguss Optimal pipe access with sludge trap removal Lateral Ø inlet possible with use of extension section Art. # Convenient wall mount system available as accessory Vertically adjustable upper section for stepless installation in concrete slabs: rotatable tiltable vertically adjustable up to mm Deeper installation and lateral inlet requirement. In one step the quick and easy solution. With extension section Art. # and extension section Art. # with Ø lateral inlet. Frost free installation depths with Art. # or Art. # (with lateral inlet) available as accessory Frost free installation depth up to 1020 mm with extension section Art. # Locking and removal key for Ecoguss drain covers with Lock & Lift System. Art. # Full selection of accessories to meet all installation requirements. Products see page 150 Products see page 151 Catalogue

76 Ecoguss Parking deck drains according to EN 3 System 100/ Illustration and dimensioned drawing Article description Ø* Article # with pressure sealing flange min. 57 max. 113 Ecoguss Parking deck drains in Ecoguss, Ø Vertical outlet, 4.5 l/sec flow rate for connection to SMLpipe according to DIN With sludge trap. System With stainless steel pressure sealing flange with square upper section in Ecoguss 247 mm x 247 mm with connection flange and round slotted cover Ø 234 mm, with Lock & Lift System Class B. Ø 78 Ø Core drilling only Ø 160 mm with QuickFit Art. # Ø H 135 Installation area 300 x 300 mm 78 H Accessories see page 82 EN 124 / EN 3 LGA Typetested and monitored guaranteed with tested quality Art. # Pipe connection drain Ø H H Installation area Ø 300 mm H H1 40 Ecoguss Parking deck drains, round in Ecoguss, Ø... Vertical outlet, 4.5 l/sec flow rate for connection to SMLpipe/plastic pipe With sludge trap. 1 System 100: SMLpipe 2 System : plastic pipe with round upper section in Ecoguss with connection flange Ø 247 and round slotted cover Ø 235 mm, with Lock & Lift System Class B. Ø Ø Pipe connection drain Ecoguss Parking deck drains, square in Ecoguss, Ø... Vertical outlet, 4.5 l/sec flow rate 1 2 Ø Ø for connection to SMLpipe/plastic pipe With sludge trap. 1 2 System 100: SMLpipe System : plastic pipe 196 H1 40 EN 124 / EN 3 LGA Typetested and monitored guaranteed with tested quality Art. # * Ø = Outer Diameter Ø H H1 Installation area 300 x 300 mm H with square upper section in Ecoguss with connection flange and round slotted cover Ø 235 mm, with Lock & Lift System Class B. EN 124 / EN 3 Catalogue 2.3 LGA Typetested and monitored guaranteed with tested quality

77 Ecoguss Parking deck drains System 100/ KESSELmodular design Combinations for any installation requirement Upper section System 100 Upper section System Upper section in Ecoguss Upper section in Ecoguss with square upper section 247 mm in Ecoguss with connection flange and round slotted cover Ø 235 mm, with Lock & Lift System Art. # with round upper section Ø 247 mm in Ecoguss with connection flange and round slotted cover Ø 235 mm, with Lock & Lift System Art. # with square upper section 247 mm in Ecoguss with connection flange and round slotted cover Ø 235 mm, with Lock & Lift System Art. # with round upper section Ø 247 mm in Ecoguss with connection flange and round slotted cover Ø 235 mm, with Lock & Lift System Art. # Accessories System 100 Accessories System ABS extension section with lip seal without inlet Art. # PP extension section with lip seal without lateral inlet Art. # with lateral inlet Art. # FireKit Fire protection insert* Certification no. Z for Ecoguss drain bodies with vertical outlet Art. # Multistop as rodent, insect, foam and odour stop Art. # Odour trap insert, PP sealing water head 50 mm Art. # Multistop as rodent, insect, foam and odour stop Art. # Drain body System 100 Upper section in Ecoguss (System 100) can be connected to SMLpipe directly QuickFit Certification no. Z ** the allround seal for core drillings for Ecoguss drain body, vertical outlet **with protection insert Art. # without protection insert Art. # * only in combination with Art. # Drain body System Ecoguss drain body with pressure sealing flange high temperature resistant, without odour trap vertical outlet Ø 78 Art. # Ø 83 Art. # Ø Art. # Use of drain body without flange available upon request! Insulating body Art. # mm Catalogue Art. #

78 Balcony drains/roof drains according to EN 3 System 100 Illustration and dimensioned drawing Art. # Art. # Art. # with glue flange Variable upper section min. 20 max. 60 Installation area 180 x 180 mm with connection flange Variable upper section min. 10 max. 60 Installation area 220 x 180 mm with connection flange Variable upper section Installation area 220 x 180 mm with pressure sealing flange Installation area 180 x 180 mm Article description Ø* Article # Balcony drain in ABS, Ø 50 Lateral outlet 2.5, 0.9 l/sec flow rate Frostproof outlet. With fixed lip seal. With glue flange and counter flange. With upper section in ABS with slotted cover 100 x 100 mm, Class K3 (able to withstand loads up to max. 300 kg). Balcony drain in ABS, Ø 50 Vertical outlet, 0.9 l/sec flow rate in ABS, Ø... Lateral outlet 2.5, 0.9 l/sec flow rate Frostproof outlet. With fixed lip seal With upper section in ABS with slotted cover 100 x 100 mm, Class K3 (able to withstand loads up to max. 300 kg). Lateral outlet: Ø Vertical outlet: Ø Lateral outlet: Ø 50 Ø Balcony drain Lateral outlet: with inserted cover Ø in synthetic material, Ø Class K3 (able to withstand loads up to max. 300 kg) Ø in ABS, Ø... Lateral outlet 2.5, 0.9 l/sec flow rate Frostproof outlet. Roof drain in PP, Ø Vertical outlet, 4.5 l/sec flow rate With pressure sealing flange in PP. With counter flange. With leaf trap. Ø with dual pressure sealing flange Roof drain Ø Installation area 180 x 180 mm * Ø = Outer Diameter EN 3 EN 3 EN Catalogue 2.3 LGA Typetested and monitored guaranteed with tested quality LGA Typetested and monitored guaranteed with tested quality LGA Typetested and monitored guaranteed with tested quality in PP, Ø Vertical outlet, 4.5 l/sec flow rate With twin sealing flanges. With pressure sealing flange in PP. With counter flange. With leaf trap.

79 Flatroof drains Ecoguss with single and double seal according to EN 3 / DIN for gravity drainage System 200 Illustration and dimensioned drawing Article description Ø* Article # With sealing flange 365 Flatroof drain Ecoguss with single seal in Ecoguss, Ø For connection to polymer pipes With pressure sealing flange in Ecoguss Ø 75 Ø Ø min. 40 max.140 H H Ø H Installation area Ø 370 mm 75 96,5 93 With twin sealing flanges EN 3/DIN LGA Typetested and monitored guaranteed with tested quality Flatroof drain Ecoguss with double seal in Ecoguss, Ø For connection to polymer pipes With pressure sealing flange in Ecoguss and upper section in Ecoguss Ø 200 with pressure sealing flange and leaf trap as double seal suitable for Multistop, System 200 with heating with heating Ø 75 Ø Ø Ø 75 Ø Ø Ø 75 Ø Ø Ø H * Ø = Outer Diameter Installation area Ø 370 mm 75 96, EN 3/DIN LGA Typetested and monitored guaranteed with tested quality Catalogue

80 Flatroof drains Ecoguss with drainage safety according to EN 3 / DIN for gravity drainage System 200 Conversion to safety drain for single and double seal with damming ring Upgrade example: Single waterproofing Before Flatroof drain Ecoguss Articles: Page Remove counterflange 1 Unlock pebble trap and remove 3 Insert damming ring as accessory according to Ø 75, or After Flatroof drain Ecoguss for drainage safety 148 Catalogue 2.3

81 Flatroof drains Ecoguss System 200 Choose one or more accessories as required: KESSELmodular design Combinations for any installation requirement Pebble trap made of polymer Upper section ABS with support rim and slotted cover 200 x 200 mm stainless steel, screwed 200 Art. # Ecoguss damming ring for drainage safety The flatroof drain becomes a balcony drain Art. # PP extension section with lip seal Ø 75 Ø H: 35 mm Art. # Ø H: 45 mm Art. # Ecoguss spacer ring to adapt pebble trap to height of pebbles Art. # PP temporary protective cover with drainage function Art. # PP leaf trap Art. # Multistop 200* as an odour, foam, rodent and insect stop Art. # ,4 50, *) Only in combination with Art. # Catalogue 2.3 Art. # Extension section Insulating pieces flame proof, class A1 for Ecoguss flatroof drain without heating Art. # for Ecoguss flatroof drain with heating Art. # for Ecoguss flatroof drain extension section (Ø 200) Art. # Galvanized steel reenforcement plate for roof applications Plate size: 600 x 600 mm Cutout: 270 mm Material thickness: 1.5 mm Art. # with pressure sealing flange and Ecoguss counter flange for installation in waterproof concrete Art. # mm

82 Gutter drains according to EN 752 System 200 Illustration and dimensioned drawing Article description Ø* Article # with odour trap and sludge trap Gutter drain made of polymer, Ø... Lateral outlet 2.5, 2.8 l/sec flow rate For frostfree depth 545 mm. With removable bellshaped odour trap, two extension sections, sludge trap. Rain inlet cover with protective pipe made of polymer. With wall securing device. made of polymer, Ø... Vertical outlet, 2.8 l/sec flow rate Lateral outlet: Ø Vertical outlet: Ø Installation area 380 x 320 mm EN 3 LGA Typetested and monitored guaranteed with tested quality with sludge trap Gutter drain made of polymer, Ø... Lateral outlet 2.5, 4.5 l/sec flow rate With sludge trap. Rain inlet cover with protective pipe in synthetic material. Lateral outlet: Ø made of polymer, Ø... Vertical outlet, 4.5 l/sec flow rate 1 2 With wall securing device Without wall securing device Vertical outlet: 1 Ø Ø EN 3 LGA Typetested and monitored guaranteed with tested quality * Ø = Outer Diameter Installation area 380 x 320 mm 150 Catalogue 2.3

83 Yard drains according to EN 752 System 200 Illustration and dimensioned drawing Article description Ø* with lateral or vertical outlet Art. # Installation area lateral outlet: 380 x 320 mm Installation area vertical outlet: 320 x 320 mm with upper section made of Ecoguss, Class B System 200 Yard drain made of polymer, Ø Outlet 1 Lateral outlet 2.5, 2 Vertical outlet, 4.5 l/sec flow rate Upper section with support rim. Slotted cover Class... With lip seal and protective cover for use during construction. Weight: Class A15 approx. 4.2 kg. Accessories Sludge trap Art. # Odourtrap (consider frost free installation depth) Art. # EN 3 LGA Typetested and monitored guaranteed with tested quality Yard drain Ecoguss 200 with drain body made of polymer and upper section made of Ecoguss, outlet Ø 1 Lateral outlet 2.5, 2 Vertical outlet, 4.5 l/sec flow rate Upper section with square support rim. Slotted cover Class B made of Ecoguss with Lock & Lift System Article # Lateral outlet: Ø Vertical outlet: Ø Lateral outlet: Ø B Vertical outlet: Ø B 2 * Ø = Outer Diameter 1 Art. # B with odour trap 102 Installation area 215 x 215 mm pipe connection drain 196 Ø H H1 194 x H H1 40 Installation area Ø 215 mm Alrondo Yard drain made of polymer, Vertical outlet, 1.6 l/sec flow rate With integrated odour trap. Cover plate 200 x 200 mm with round slotted cover Ø 140 mm made of polymer, screwed Can be driven over by vehicles of up to 2 ton. Ecoguss Yard drain in Ecoguss, Ø Vertical outlet, 4.5 l/sec flow rate With sludge trap. 1 Upper section with square support rim in Ecoguss and round slotted cover Ø 235 mm, with Lock & Lift System, Class B. 2 Upper section with round support rim in Ecoguss and round slotted cover Ø 235 mm, with Lock & Lift System, Class B. EN 3 Ø Ø Ø S 67 B B Catalogue

84 Gutter drains, Yard drains System 200 Choose a drain body: KESSELmodular design Combinations for any installation requirement Drain body made of polymer 4.5 l/sec flow rate Lateral outlet 2.5 Ø Art. # Vertical outlet Ø Art. # Choose an upper section / cover: Upper section with support rim in Ecoguss with round slotted cover in Ecoguss Ø 235 mm with Lock & Lift System, Class B height adjustable from mm. Art. # Polymer slotted cover Class A15 / L15 Art. # Polymer support rim Class A15 / L15 Art. # Polymer cover plate Class A15 / L15, sealed with respect to surface water Art. # Polymer rain inlet cover with protective pipe Ø Art. # Upper section made of polymer... Height adjustable from mm. Art. # Polymer rain inlet cover for additional surface drainage with protective pipe Ø Art. # Catalogue 2.3

85 Gutter drains, Yard drains System 200 Choose one or more accessories as required: KESSELmodular design Combinations for any installation requirement Polymer extension section Installation height 240 mm Art. # Polymer extension section with laterial inlet Art. # Bellshaped odour trap insert, PP Sealing water height 100 mm Art. # Bellshaped odour trap insert, PP Sealing water height 70 mm Art. # Bellshaped odour trap, stainless steel removable, Sealing water height 70 mm Art. # Lip seal Art. # Lip seal Nonslip mounting Art. # Sludge trap, PEHD Art. # Multistop for Art. # 67 B and B Art. # Wall securing device Multistop* for gutter drains Art. # as an odour, foam, rodent and insect stop Ø 200 Art. # *) for Art. # , B, B Lifting mechanism for removing odour trap Art. # Locking and removal key for Ecoguss drain covers with Lock & Lift System. Art. # Catalogue

86 Yard drains according to EN 752 System 400 KESSEL Professional advantages Variable upper section rotatable inclinable height adjustable Side inlets up to a nominal width of Ø 160 via drilling on the side, can be connected very easily and quickly. Optimum cleaning of the pipes by removing the odour trap/sludge trap Can be adapted to the level of the floor Can be expanded and combined using supplementary parts Fuel resistant Can bear lorries weighing up to 40 ton. KESSEL modular system/accessories see Page Illustration and dimensioned drawing Article description Ø* Article # with sludge trap D System 400 Yard drain in polyethylene, Ø... Lateral outlet, 4.5 l/sec flow rate With sludge trap. For installation depth (D) from 380 to 510 mm, watertight, resistant to aggressive wastewater. With fuelresistant gaskets. Upper section with slotted cover Class A made of polymer, Class B, D in cast iron according to EN 124 for continuous height and level adjustment. Ø Ø A B D A B D Art. # 851 A Installation area 585 x 535 mm Weight: Class A approx. 10 kg Class B approx kg Class D approx. 20 kg * Ø = Outer Diameter 154 Catalogue 2.3

87 Yard drains according to EN 752 System 400 Illustration and dimensioned drawing Article description Ø* Article # with odour trap and sludge trap D System 400 Yard drain in polyethylene, Ø... Lateral outlet, 4.5 l/sec flow rate With odour trap and sludge trap. For installation depth (D) from 580 to 710 mm, watertight, resistant to aggressive wastewater. With fuelresistant gaskets. Upper section with slotted cover Class A made of polymer, Class B, D in cast iron according to EN 124 for continuous height and level adjustment. Weight: Class A approx. 20 kg Class B approx. 23 kg Class D approx. 30 kg Ø Ø A B D A B D Art. # A Installation area 585 x 535 mm with odour trap and sludge trap System 400 Yard drain in polyethylene, Ø... Lateral outlet, 4.5 l/sec flow rate With odour trap and sludge trap. For installation depth (D) from 730 to 1080 mm, watertight, resistant to aggressive wastewater. With fuelresistant gaskets. Upper section with slotted cover Class A made of polymer, Class B, D in cast iron according to EN 124 for continuous height and level adjustment. Weight: Class A approx. 45 kg Class B approx kg Class D approx. 55 kg Ø Ø A B D D A B D Art. # A Installation area 585 x 535 mm * Ø = Outer Diameter Catalogue

88 Yard drains System 400 for higher load classes Choose a drain body: KESSELmodular design Combinations for any installation requirement Polyethylene drain bodies closed Art. # Open channel passage L 450 with outlet Ø Art. # Ø 160 Art. # Open channel passage L 450 Inlet/Outlet Ø 160, L=726 mm, H=259 mm, Art. # Inlet Ø 160/Outlet Ø 200, L=746 mm, H=259 mm, Art. # Inlet/Outlet Ø 200, L=756 mm, H=304 mm, Art. # Inlet Ø 200/Outlet Ø 250, L=771 mm, H=304 mm, Art. # Inlet/Outlet Ø 160, L=726 mm, H=259 mm, Art. # Inlet/Outlet Ø 200, L=756 mm, H=306 mm, Art. # Inlet/Outlet Ø 250, L=790 mm, H=344 mm, Art. # Choose an upper section / cover: Upper section with clamping ring... Cover plates polymer cast iron cast iron Class A Art. # Class B Art. # Class D Art. # Class A, B, continuously height adjustable Art. # Slotted covers polymer cast iron cast iron Class A Art. # Class B Art. # Class D Art. # Class D, continuously height adjustable Art. # Catalogue 2.3

89 Yard drains System 400 for higher load classes Choose one or more accessories as required: KESSELmodular design Combinations for any installation requirement Polyethylene extension section Art. # Transition sections Transition section 450 Art. # Connecting wedges, 4 pieces Art. # Polymer sludge trap Art. # Transition section 360 Art. # Profiled gaskets Profiled gasket 450 Art. # Odour traps Ø Art. # Ø 160 Art. # Pressure sealing flange for upper section Art. # Profiled gasket 360 Art. # Gaskets for pipe conduits Ø 50 Art. # Ø 75 Art. # Ø Art. # Ø Art. # Ø 160 Art. # Hole saw for drilling lateral surfaces for inlets and outlets Ø 50, 75,, and 160 (Saw blade holder Ø = 190 mm) Art. # Elastomer waterproof membrane in NK/SBR Art. # Lifting mechanism for removing odour trap Art. # Catalogue

90 Street gullies Ø 400 Illustration Article description Standard manhole cover onsite Upper section Lip seal Inspection chamber Accessories: Rodent protection flap Chamber height mm mm Installation depths from 573 to 825 mm possible Street gullies Ø 400 in polyethylene For underground installation Installation depth (D) 573 mm to 785 mm (Height without manhole upper section), with monolithic structure, resistant against aggressive wastewater, frost and deicing salts, with outlet Ø 160 suitable for connection of PVC pipe according to DIN and PEHD pipe according to DIN with lateral outlet couplings Ø 160; 10 With upper section 50 x 50 cm: Art. #: With upper section 30 x 50 cm: Art. #: with lateral outlet couplings Ø 160; 0 With upper section 50 x 50 cm: Art. #: With upper section 30 x 50 cm: Art. #: Standard manhole cover onsite Upper section Lip seal Inspection chamber Accessories: Rodent protection flap Chamber height mm mm Installation depths from 1085 to 1336 mm possible with lateral outlet couplings Ø 160/200/250; 2 With upper section 50 x 50 cm: Art. #: With upper section 30 x 50 cm: Art. #: Street gullies with wet sludge trap Ø 400 in polyethylene, with lateral outlet couplings Ø 160 For underground installation Installation depth (D) 1085 mm to 1296 mm (Height without manhole upper section), with monolithic structure, resistant against aggressive wastewater, frost and deicing salts, with outlet Ø 160 suitable for connection of PVC pipe according to DIN and PEHD pipe according to DIN with lateral outlet couplings Ø 160; 10 With upper section 50 x 50 cm: Art. #: With upper section 30 x 50 cm: Art. #: with lateral outlet couplings Ø 160; 0 With upper section 50 x 50 cm: Art. #: With upper section 30 x 50 cm: Art. #: Illustration shows Art. # Illustration Accessories Article description Article # Lip seal suitable for street gullies Catalogue 2.3 Rodent protection flap suitable for street gullies