SUPPORT EQUIPMENTS 7 E 01-12

Transcription

1 SUPPORT EQUPMENTS 7 E 0- CLAMPS type C 7. BRACKETS type MA and SUPPORT RNG type AG 7. U-BOLTS type U and PLASTC SADDLES type P 7. SNGLE ACCUMULATOR UNT type BAS 7.4 EPE TALANA s.r.l. - Viale Spagna, 009 Cologno Monzese (Mi) taly Tel.: Fax: [email protected] nternet:

2

3 CLAMPS type C 7. E DESCRPTON The mounting clamps can be used with all type of accumulators. Secure design provides independent mounting on installations. Rubber insert provided to reduce mechanical vibration, to compensate for shell manufacturing tolerances and to not lie with outward stresses on the connection. The clamp type C90 has one piece construction with one central screw. All other types have a two pieces construction for easy installation and removal while improving the strength to weight ratio. We recommend using a single clamp when the length of the accumulator is less than twice the diameter. For greater lengths, we recommend using two clamps or one clamp and one bracket with support ring. 7.. CONSTRUCTON The clamps are manufactured of galvanized carbon steel in compliance to directive 00/95/CE (RoHS) for resist to the corrosion, on request they can be supplied in stainless steel version. The rubber insert is black NBR rubber nitrile at 0 Shore A. 7.a 7.. ORDER CODE 4 C 0 - C P Elastomer material CLAMP = C Rubber in NBR = P Other on request Nominal diameter nternal diameter range 9 9 = 90 4 = = = 0 4 Clamp material Carbon steel galvanized Stainless steel AS 6 = C = X EPE TALANA s.r.l. - Viale Spagna, 009 Cologno Monzese (Mi) taly Tel.: Fax: [email protected] nternet:

4 7. E 0- CLAMPS type C 7..4 DMENSONS fig. fig. 7.b 7..5 USAGE TABLE 7.c Reproduction s Forbidden. n The Spirit Of Continuous mprovement, Our Products May Be Changed. 7.d EPE TALANA s.r.l. - Viale Spagna, 009 Cologno Monzese (Mi) taly Tel.: Fax: [email protected] nternet:

5 BRACKETS type MA and SUPPORT RNG type AG 7. E DESCRPTON Brackets can be used with all type of accumulators. Secure design provides independent mounting on installations. Rubber insert provided to reduce mechanical vibration, to compensate for shell manufacturing tolerances and to not lie with outward stresses on the connection. The brackets can be easily bolted to the system. We recommend using a bracket and support ring with one or two clamps or U-bolts. 7.. CONSTRUCTON All the brackets are manufactured of galvanized carbon steel in compliance to directive 00/95/CE (RoHS) for resist to the corrosion, on request they can be supplied in stainless steel version. The support ring is manufactured of black NBR rubber nitrile at 5 Shore A. 7.a 7.. BRACKET ORDER CODE 4 MA 50 - C P 4 Support ring material Bracket = MA Rubber in NBR = P Other on request Nominal diameter Nominal internal diameter 00 = = 50 Clamp material Carbon steel galvanized Stainless steel AS 6 = C = X 7..4 BRACKET DMENSONS 7.b Bracket nominal size A B C ød ød ød ød E F G H Weight (Kg) , ,6 7.c EPE TALANA s.r.l. - Viale Spagna, 009 Cologno Monzese (Mi) taly Tel.: Fax: [email protected] nternet:

6 7. E 0- BRACKETS type MA and SUPPORT RNG type AG 7..5 SUPPORT RNG ORDER CODE AG 50 - P Support ring material Support ring = AG Rubber in NBR = P Other on request Nominal diameter Nominal internal diameter 00 = = SUPPORT RNG DMENSONS 7.e Support Ring nominal size A B ød ød ød ød4 Weight (Kg) , , 7.f 7..7 USAGE TABLE 7.. MOUNTNG Example for mounting. 7.g 7.h Reproduction s Forbidden. n The Spirit Of Continuous mprovement, Our Products May Be Changed. EPE TALANA s.r.l. - Viale Spagna, 009 Cologno Monzese (Mi) taly Tel.: Fax: [email protected] nternet:

7 U-BOLTS type U and PLASTC SADDLES type P 7. E DESCRPTON Round U-bolts clamp with plastic saddles can be used with all type of accumulators. Secure design provides independent mounting on installations. The plastic saddle provided to reduce mechanical vibration, to compensate for shell manufacturing tolerances and to not lie with outward stresses on the connection. We recommend using a single U-bolt when the length of the accumulator is less than twice the diameter. For greater lengths, we recommend using two or three U-bolts with saddles. 7.. CONSTRUCTON The all U-bolts are manufactured of galvanized carbon steel in compliance to directive 00/95/CE (RoHS) for resist to the corrosion, on request they can be supplied in stainless steel version. The U-bolts are supplied with two hex nuts UN 55 CLASS A -70 and two washer UN659 class 00 HV. The plastic saddles are manufactured of green polypropylene. 7.. U-BOLT ORDER CODE U 50 - C 7.a Material U - bolt = U Carbon steel galvanized Stainless steel AS 6 = C = X 7..4 U-BOLT DMENSONS Nominal diameter Nominal internal diameter 5 = 5 0 = 0 6 = 6 0 = 0 = 40 = = 55 fig. fig. 7.b U-Bolt nominal size fig. A B C ød E F SW Weight (Kg) M 0, M 4 0, M0 7 7, M6 6 4, M0 44 0, M M ,7 EPE TALANA s.r.l. - Viale Spagna, 009 Cologno Monzese (Mi) taly Tel.: Fax: [email protected] nternet:

8 7. E 0- U-BOLTS type U and PLASTC SADDLES type P 7..5 PLASTC SADDLE ORDER CODE P 0 - PP Material Plastic saddle = P Green polypropylene = PP Other on request 7..6 PLASTC SADDLE DMENSONS Nominal diameter Nominal diameter of the tube 4 = 5 = 0 6 = 6 9 = 0 6 = 49 = 40 7.c Saddles nominal size A B ØC ød H H H MOUNTNG Example for mounting. 7.c Reproduction s Forbidden. n The Spirit Of Continuous mprovement, Our Products May Be Changed. EPE TALANA s.r.l. - Viale Spagna, 009 Cologno Monzese (Mi) taly Tel.: Fax: [email protected] nternet:

9 SNGLE ACCUMULATOR UNT type BAS 7.4 E DESCRPTON The single accumulator unit consist of a bladder accumulator ( 50 liters or /4 5 gallons), a safety and shut-off block and the appropriate steel support. This solution is designed in order to simplify the mounting at the installation site, the connection of the accumulator to the hydraulic system, and in order to reduce the assembling costs CONSTRUCTON All the single accumulator units are manufactured of galvanized carbon steel in compliance to directive 00/95/CE (RoHS) for resist to the corrosion, on request they can be supplied in stainless steel version. DESGN: Pressure Equipment Directive PED 97//EC (others on request) CONSTRUCTON: - accumulator AS: see section. - accumulator low pressure type ASB: see section. - accumulator ASA: see section.5 - safety and shut-off block: see section and ORDER CODE 7.4a 4 5 BAS 55 - C P A74... Single accumulator unit = BAS 5 No. of the drawing Assigned by EPE TALANA after the order = 74 Capacity Bladder accumulator see cap. 4 Elastomer of the support Rubber in NBR = P Other on request Support material CARBON STEEL GALVANZED = C STANLESS STEEL AS 6 = X EPE TALANA s.r.l. - Viale Spagna, 009 Cologno Monzese (Mi) taly Tel.: Fax: [email protected] nternet:

10 7.4 E 0- SNGLE ACCUMULATOR UNT type BAS DMENSONS 7.4b Accumulator type AS0 AS5 AS0 A B C ød E F G H H H L M N O P Q R S T U V Z AS5 AS AS Reproduction s Forbidden. n The Spirit Of Continuous mprovement, Our Products May Be Changed. EPE TALANA s.r.l. - Viale Spagna, 009 Cologno Monzese (Mi) taly Tel.: Fax: [email protected] nternet: