PARTS DIAGRAMS AND LISTS

Transcription

1 -PRINT- - TABLE OF CONTENTS- IV. PARTS DIAGRAMS AND LISTS T his chapter contains parts diagrams and lists for the VMI UNI-lite DOT Private Use Wheelchair Lift. The exploded view of each major lift assembly shows individual components referenced by numbers. On each associated list is the reference number, a part description, the quantity used and the VMI part number. For part numbers of lift decals, refer to the Decal Locations and Part Numbers figure in Chapter II of this manual. LIFT MODEL AND KIT NUMBERS PRODUCT NUMBER UL2400-1G01000 (First listed model number) DOCUMENTATION KIT NUMBER PRODUCTION DECAL SET NUMBER PARTS DIAGRAM PAGE FIGURE 4-1: UNI-lite PLATFORM ASSEMBLY FIGURE 4-2: UNI-lite BASE ASSEMBLY (Sheet 1 of 2) FIGURE 4-2: UNI-lite BASE ASSEMBLY (Sheet 2 of 2) FIGURE 4-3: UNI-lite ELECTRICAL ASSEMBLY (Sheet 1 of 2) FIGURE 4-3: UNI-lite ELECTRICAL ASSEMBLY (Sheet 2 of 2) FIGURE 4-4: UNI-lite PLATFORM POST ASSEMBLY (Sheet 1 of 2) FIGURE 4-4: UNI-lite PLATFORM POST ASSEMBLY (Sheet 2 of 2) Appendix 1 Lift Specifications DULP04.A 4-1

2 32DULP04.A A A RSM FIGURE 4-1: UNI-LITE PLATFORM ASSEMBLY

3 FIGURE 4-1: UNI-LITE FMVSS PLATFORM ASSEMBLY FIG. ITEM DESCRIPTION QTY CONFIG. PART NO. 1 ** PLATFORM ASSY, 26" X 36" FMVSS REF UL2400-1G A ** PLATFORM ASSY, 29" X 40" FMVSS REF UL2806-2G ** REF UL2806-2G B ** PLATFORM ASSY, 29" X 44" FMVSS REF UL2808-2G ** REF UL2808-3G C ** PLATFORM ASSY, 32" X 44" FMVSS REF UL2810-2G ** REF UL2810-3G NUT, HEX, 1/4-20, SST (BAG OF 10) PIN, COTTER, 3/32 X 0.50 (BAG OF 10) CLEVIS-SUPPORT CHAIN, RR ENTRY MDL 2 UL-PF PAD, PLATFORM, CLEVIS 2 UL-PF-0 6 PIN, CLEVIS, 1/4 X 1 23/64 ZINC SCREW, FHH, 1/4-20 X 5/8 SST (BAG OF 10) BUSHING, PIVOT, LATCH 1 UL-PF WASHER, FLT,.315 ID X OD X.062" NYL (BAG OF 10) SKI, SWITCH ACTUATOR SCREW, SHOULDER, FLAP LATCH 1 UL-PF SCREW, PHP, X 3/8" (BAG OF 10) BUMPER, 1.00 OD X.50 THK, RUB W/.180 HOLE NUT, HEX, 6-32" (BAG OF 10) SPRING, EXTENSION, UNI-LITE SCREW, PHP, 6-32 X 1/4" MS (BAG OF 10) WASHER, FLT,.318 X.751 X.031 NYL (BAG OF 10) GUIDE, DRIVE SHAFT PIVOT 1 UV-DS CATCH, ROLLSTOP, LATCH 1 UL-PF SOCKET, FLAT, 1/4-20 X 3/4" (BAG OF 10) * ROLLSTOP, WELD ASSY, 26" 1 UL2400-1G01000 UL-PF A * ROLLSTOP, WELD ASSY, 29" 1 UL2806-2G * 1 UL2806-2G * 1 UL2808-2G * 1 UL2810-3G B * ROLLSTOP, WELD ASSY, 32" 1 UL2810-2G * 1 UL2810-3G SAFETY TREAD, 25.5 X 3, SAFETY YELLOW CLEVIS PIN, 1/4 X 55/64" (BAG OF 10) WASHER, 1/4 STAR, INTERNAL SCREW, CARRIAGE, SST, 1/4-20 X 5/8" (BAG OF 10) SCREW, BHS, 1/4-20 X 3/8" SST (BAG OF 10) * STRAP, ROLLSTOP ACTUATOR, 36" PLATFORM 2 UL2400-1G01000 UL-DS-0 27A * STRAP, ROLLSTOP ACTUATOR, 40 & 44" PLATFORM 2 UL2806-2G01000 UL-DS-019 * 2 UL2806-2G02000 UL-DS-019 * 2 UL2808-2G01000 UL-DS-019 * 2 UL2808-3G01000 UL-DS-019 NOTE: (REF) in QTY column is for Referenced Parts Only and are not sold as spare parts. * Part number ONLY applies to corresponding configuration identified in CONFIG column. If no configuration is identified in CONFIG column then part number applies to ALL configurations. ** Reference Only Not for Sale 32DULP04.A 4-3

4 FIGURE 4-1: UNI-LITE PLATFORM ASSEMBLY (CONT D) FIG. ITEM DESCRIPTION QTY CONFIG. PART NO. 28 SAFETREAD, 25.5 X 2.25", OCEAN GRAY SAFETREAD, 25.5 X 8", OCEAN GRAY SAFETREAD, 25.5 X 4", OCEAN GRAY ROLLER, SUPPORT CHAIN, CLEVIS 1 UL-AC * ROLLSTOP ASSEMBLY, 26" FMVSS 1 UL2400-1G A * ROLLSTOP ASSEMBLY, 29" FMVSS 1 UL2806-2G * 1 UL2806-2G * 1 UL2808-2G * 1 UL2808-3G B * ROLLSTOP ASSEMBLY, 32" FMVSS 1 UL2810-2G * 1 UL2810-3G SPRING-BARRIER HINGE LARGE BUSHING, ROLLSTOP ACTUATOR, SST 2 UL-PF SWITCH/BRACKET ASSY, W/PLUNGER PLATFORM PARTS, FMVSS REF NOTE: (REF) in QTY column is for Referenced Parts Only and are not sold as spare parts. * Part number ONLY applies to corresponding configuration identified in CONFIG column. If no configuration is identified in CONFIG column then part number applies to ALL configurations. ** Reference Only Not for Sale DULP04.A

5 This page intentionally left blank. 32DULP04.A 4-5

6 32DULP04.A A B RSM FIGURE 4-2: UNI-LITE BASE ASSEMBLY (SHEET 1 OF 2)

7 A B RSM FIGURE 4-2: UNI-LITE BASE ASSEMBLY (SHEET 2 OF 2) 32DULP04.A 4-7

8 FIGURE 4-2: UNI-LITE BASE ASSEMBLY FIG. ITEM DESCRIPTION QTY CONFIG. PART NO. 1 SCREW, BHS, 1/4-20 X 1/2 BLK (BAG OF 10) WASHER, FLT,.281 X.625 X.065 (BAG OF 10) * PLATE, ALIGNMENT, TOP, 26" 1 UL2400-1G01000 UL-BA-024 3A * PLATE, ALIGNMENT, TOP, 29" 1 UL2806-2G01000 UL-BA-007 * 1 UL2806-2G02000 UL-BA-007 * 1 UL2808-2G01000 UL-BA-007 * 1 UL2808-3G01000 UL-BA-007 3B * PLATE, ALIGNMENT, TOP, 32" 1 UL2810-2G01000 UL-BA-025 * UL2810-3G01000 UL-BA TAB, CHAIN 2 UL-DS CHAIN, LINK, MASTER # KIT, DRIVE CHAIN #40 REPLACEMENT, (STD) A KIT, DRIVE CHAIN REPLACEMENT, TALL, 5 PITCHES CHAIN, STOP, SAFETY 4 UL-DS SMS #12 X 1 HEX WASHER HEAD "A" NUT-HEX, 1/4-20", NYLON INSERT (BAG OF 10) SPACER, MOUNTING BKT, TOP 2 UL-BA SCREW, BHS, 1/4-20 X 3/8 SST (BAG OF 10) BRACKET, CHAIN TUBE 2 UL-BA SPACER, MAIN POST (USE 4 FOR SHORT LIFTS) 2 UL-BA * TUBE-CHAIN, WITH RING 2 UL2400-1G * 2 UL2806-2G * 2 UL2806-2G * 2 UL2808-2G * 2 UL2808-3G * 2 UL2810-2G A * TUBE-CHAIN 36" LONG 2 UL2400-1G01000 UL-BA-040 * 2 UL2806-2G01000 UL-BA-040 * 2 UL2806-2G02000 UL-BA-040 * 2 UL2808-2G01000 UL-BA-040 * 2 UL2810-2G01000 UL-BA * POST, EXTENSION, MAIN, STD 1 UL2400-1G01000 UL-BA-011 * 1 UL2806-2G01000 UL-BA-011 * 1 UL2806-2G02000 UL-BA-011 * 1 UL2808-2G01000 UL-BA-011 * 1 UL2810-2G01000 UL-BA A * POST, EXTENSION, MAIN, TALL, STD 1 UL2808-3G01000 UL-BA-034 * 1 UL2810-3G01000 UL-BA POST, MAIN, STD 1 UL-BA TUBE, FOLD STOP 2 UL-AC FOLD STOP 2 UL-BA SCREW, BHS, 5/16-18 X 3/4 SST, BLK OX (BAG OF 10) NOTE: (REF) in QTY column is for Referenced Parts Only and are not sold as spare parts. * Part number ONLY applies to corresponding configuration identified in CONFIG column. If no configuration is identified in CONFIG column then part number applies to ALL configurations. ** Reference Only Not for Sale DULP04.A

9 FIGURE 4-2: UNI-LITE BASE ASSEMBLY (CONT D) FIG. ITEM DESCRIPTION QTY CONFIG. PART NO. 20 WASHER,FDR,.31x1.25 SST BLK OXIDE (BAG OF 10) WASHER, NYLON BEARING-DU FLG, 3/4 ID X 1/4 L (KIT OF 10) NUT, ESN, 5/16-18 (BAG OF 10) SOCKET, BUTTON HEAD, 5/16-18 X 2-1/4, BLK. OXD. SST * ASSY, WELD, BASEPLATE, WIDE 26 1 UL2400-1G01000 UL-BA A * ASSY, WELD, BASEPLATE, WIDE, 29 1 UL2806-2G01000 UL-BA-014 * 1 UL2806-2G02000 UL-BA-014 * 1 UL2808-2G01000 UL-BA-014 * 1 UL2808-3G01000 UL-BA B * ASSY, WELD, BASEPLATE, WIDE, 32" 1 UL2810-2G01000 UL-BA-0 * 1 UL2810-3G01000 UL-BA-0 26 * ASSY, MECH, BRIDGEPLATE, 26" 1 UL2400-1G01000) UL-BA A * ASSY, MECH, BRIDGEPLATE, 29" 1 UL2806-2G01000 UL-BA-127 * 1 UL2806-2G02000 UL-BA-127 * 1 UL2808-3G01000 UL-BA B * ASSY, MECH, BRIDGEPLATE, 32" 1 UL2810-2G01000 UL-BA-130 * 1 UL2810-3G01000 UL-BA SKID, BRIDGEPLATE 3 UL-BA SCREW, FHP, X 1/4 UNDERCUT (BAG OF 10) * SAFETY TREAD, 23 X 3, SAFETY YELLOW 1 UL2400-1G A * SAFETY TREAD, 23 X 7, SAFETY YELLOW 1 UL2400-1G * SAFETY TREAD, 25 1/2 X 3, SAFETY YELLOW 1 UL2400-1G * 1 UL2806-2G * 1 UL2806-2G * 1 UL2808-2G * 1 UL2808-3G * 1 UL2810-2G * 1 UL2810-3G A * SAFETY TREAD, 25 1/2 X 7, SAFETY YELLOW 1 UL2806-2G * 1 UL2806-2G * 1 UL2808-2G * 1 UL2808-3G * 1 UL2810-2G * 1 UL2810-3G WASHER, 1/4", STAR INTERNAL ASSY, WELD, PIN, LINK ARM, 2 UL-AC SCREW, SHOULDER, 3/8 X 1/2" (BAG OF 10) CAM, LIFT CONTROL w/screw 1 UL-ES PIN, LINK ARM, CAM 2 UL-AC PIN, ROLL, 3/32 X 1/2" (BAG OF 10) POST, MAIN, LH 1 UL-BA-013 NOTE: (REF) in QTY column is for Referenced Parts Only and are not sold as spare parts. * Part number ONLY applies to corresponding configuration identified in CONFIG column. If no configuration is identified in CONFIG column then part number applies to ALL configurations. ** Reference Only Not for Sale 32DULP04.A 4-9

10 FIGURE 4-2: UNI-LITE BASE ASSEMBLY (CONT D) FIG. ITEM DESCRIPTION QTY CONFIG. PART NO. 38 SCREW, BHS, 1/4-20 X 3" BLK SST WASHER, FDR,.281 X 1.00 X GROMMET RED CAP * POST, EXTENSION, MAIN, LEFT 1 UL2400-1G01000 UL-BA-017 * 1 UL2806-2G01000 UL-BA-017 * 1 UL2806-2G02000 UL-BA-017 * 1 UL2808-2G01000 UL-BA-017 * 1 UL2810-2G01000 UL-BA A * POST, EXTENSION, MAIN-TALL, LEFT 1 UL2808-3G01000 UL-BA-035 * 1 UL2810-3G01000 UL-BA KIT, CHAIN GUIDE BLOCK SOCKET, BUTTON HD, 1/4-20 X 2 1/2" * POWER SHAFT, WIDE, 26" 1 UL2400-1G01000 UL-DS A * POWER SHAFT, STD, 29" 1 UL2806-2G01000 UL-DS-004 * 1 UL2806-2G02000 UL-DS-004 * 1 UL2808-2G01000 UL-DS-004 * 1 UL2808-3G01000 UL-DS B * POWER SHAFT, WIDE, 32" 1 UL2810-2G01000 UL-DS-016 * 1 UL2810-3G01000 UL-DS KEY, WOODRUFF ASSY, BLOCK, BEARING 2 UL-BA STRIPPER, CHAIN 2 UL-BA SPROCKET 2 UL-DS BOLT HEX 1/4-20 X 1" (BAG OF 10) GEAR BOX, COVER 1 UL-AC WASHER, SPL, 1/4 (BAG OF 10) MOTOR, 1HP 12V STANDOFF, MOTOR UNI-LITE COVER, BOTTOM MOTOR UNI-LITE 1 UL-AC-1 56 SCREW, PHP, X 3/8 (BAG OF 10) WASHER, #10 SPLIT LOCK (BAG OF 10) KIT, TOOL CLIP, W/HARDWARE GEAR BOX, 70:1 INCLUDING TORQUE ARM CLIP-EMERGENCY TOOLS-SMALL KIT, EMERGENCY WRENCH SOCKET-EMERGENCY 3/8 DRIVE-11/16 DEEP UNIVERSAL JOINT, 3/8 DRIVE SPEED WRENCH-3/8 DRIVE ROLL PIN 3/16 X 1 SST SCREW, BHS, 1/4-20 X 3/8 SST (BAG OF 10) WASHER, FLT,.219 X.50 X.049 (BAG OF 10) NOTE: (REF) in QTY column is for Referenced Parts Only and are not sold as spare parts. * Part number ONLY applies to corresponding configuration identified in CONFIG column. If no configuration is identified in CONFIG column then part number applies to ALL configurations. ** Reference Only Not for Sale DULP04.A

11 FIGURE 4-2: UNI-LITE BASE ASSEMBLY (CONT D) FIG. ITEM DESCRIPTION QTY CONFIG. PART NO. 68 SPACER, B-BLOCK BUSHING 1 UL-BA BUSHING-BRONZE SPURR BEARING BLOCK, ALUM. 1 UL-BA MS, X 1/4 PHIL PAN CLAMP, RETAINING SLEEVE-MOTOR/GEARBOX CONNECTION 2 UL-AC GASKET-RUBBER MOTOR GEARBOX 2 UL-AC BUSHING-STEM, SHOCK MOUNT WASHER-1/4" FENDER 1" OD (BAG OF 10) GEARMOTOR ASSY, 12V 1 UL-DS WASHER-5/16 X 0.61 OD X 0.03 INTL. STAR BRONZE NOTE: (REF) in QTY column is for Referenced Parts Only and are not sold as spare parts. * Part number ONLY applies to corresponding configuration identified in CONFIG column. If no configuration is identified in CONFIG column then part number applies to ALL configurations. ** Reference Only Not for Sale 32DULP04.A 4-11

12 TWS - RH 52 F B TWS - LH 54 A A C D RSM FIGURE 4-3: UNI-LITE ELECTRICAL ASSEMBLY (SHEET 1 OF 2) DULP04.A

13 B 21 C D E FIGURE 4-3: UNI-LITE ELECTRICAL ASSEMBLY (SHEET 2 OF 2) F RSM DULP04.A 4-13

14 FIGURE 4-3: UNI-LITE ELECTRICAL ASSEMBLY FIG. ITEM DESCRIPTION QTY CONFIG. PART NO. 1 ELECTRICAL-BOX ASSEMBLY UNI-LITE (S.N s 7887-) COVER, UNI-LITE ELECTRICAL FRONT (S.N s ) 1 UL-ES MS, X 3/8" PHIL PAN (BAG OF 10) COVER TOP, ELECTRICAL BOX 1 UL-AC SCREW, PHP, X 1/2 TRS T 6 CONTROLLER, ZERO POWER WASHER # 10 SPLIT LOCK (BAG OF 10) WASHER, #10, FLAT, SAE DECAL, VMI JUMPER-GROUND STRAP UNI-LITE 1 UL-ES PLUG, SHORTING 1 UL-ES KIT, CAM WLDT, W/SET SCREW SWITCH, ASSY., (UP/IN ENABLE) UNILITE 1 UL-ES SWITCH, LIMIT, (UP/DOWN CUTOFF) UNILITE 4 UL-ES SWITCH, ASSY., (DOWN/OUT ENABLE) UNILITE 1 UL-ES SCREW, PHP, X 3/4 (BAG OF 10) WASHER, SPL, #10 (BAG OF 10) WASHER, #10, FLAT, SAE (BAG OF 10) SWITCH, LIMIT, (UP/DOWN CUTOFF) UNILITE 1 UL-ES SWITCH BLOCK SCREW,PHP,4-40 X 3/4" MS (BAG OF 10) NUT, HEX, 4-40, PLATED (BAG OF 10) HARNESS ASSY., CAM SWITCH, UNI-LITE 1 UL-ES JUMPER, 6AWG, 60" MOTOR LEAD NEG 1 UL-ES JUMPER-6AWG, 60" MOTOR LEAD POS 1 UL-ES ** ELBOW,CONDUIT,CRUSHED & PAINTED REF UL2400-1G A ** ELBOW,CONDUIT,CRUSHED & PAINTED REF UL2806-2G ** REF UL2806-2G ** REF UL2808-2G ** REF UL2810-2G B ** ELBOW,CONDUIT,CRUSHED & PAINTED REF UL2808-3G ** REF UL2810-3G SPACER, ELECTRICAL SYSTEM UNILITE 1 UL-ES STRAP, ELECTRICAL TUBE 1 UL-ES SCREW, PHP, X 1/ SCREW, PHP, X 3/ SWITCH, SPDT TOGGLE NUT, SWITCH, TOGGLE (BAG OF 10) WASHER, SWITCH, TOGGLEN (BAG OF 10) HARNESS, ARM SWITCH, SHORT 1 UL-ES CLAMP, 3/16", CABLE SCREW, PHP, 8-32 x 1/ NOTE: (REF) in QTY column is for Referenced Parts Only and are not sold as spare parts. * Part number ONLY applies to corresponding configuration identified in CONFIG column. If no configuration is identified in CONFIG column then part number applies to ALL configurations. ** Reference Only Not for Sale DULP04.A

15 FIGURE 4-3: UNI-LITE ELECTRICAL ASSEMBLY (CONT D) FIG. ITEM DESCRIPTION QTY CONFIG. PART NO. 37 RIVET, 1/8" X 1/2" (BAG OF 10) WASHER #4 FLAT SCREW, PHP, X 1/2" (BAG OF 10) WASHER # 10 SPLIT LOCK NUT, JAM, CLAMP, CABLE, 3/8" (BAG OF 10) COVER, LIMIT SWITCH 1 UL-AC BRACKET, CHAIN 2 UL-DS SCREW, SSS, 3/8 X 1/ HARNESS, PLATFORM POST 1 UL-ES CLAMP, P-POST HARNESS, SHORT 1 UL-AC BREAKER, CIRCUIT, 8 AMP BREAKER, CIRCUIT, 30 AMP KIT, PENDANT, 7 FT. UNI-LITE ENCLOSURE, SENSOR BRACKET, SENSOR ANCHOR SENSOR ASSY, RECEIVER SENSOR ASSY, TRANSMITTER SCREW, PHP, X 3/8 TYPE F, ZINC PLATED COVER, PCB & COUNTER HOUSING PCB BOARD ASSY, PRIVATE PCB STANDOFFS COUNTER ASSY BRACKET, COUNTER ADAPTER SCREW, PHP, X 3/ NOTE: (REF) in QTY column is for Referenced Parts Only and are not sold as spare parts. * Part number ONLY applies to corresponding configuration identified in CONFIG column. If no configuration is identified in CONFIG column then part number applies to ALL configurations. ** Reference Only Not for Sale 32DULP04.A 4-15

16 A B A RSM FIGURE 4-4: UNI-LITE PLATFORM POST ASSEMBLY (SHEET 1 OF 2) 32DULP04.A

17 A B RSM FIGURE 4-4: UNI-LITE PLATFORM POST ASSEMBLY (SHEET 2 OF 2) 32DULP04.A 4-17

18 FIGURE 4-4: UNI-LITE PLATFORM POST ASSEMBLY FIG. ITEM DESCRIPTION QTY CONFIG. PART NO. 1 CAP, PLATFORM POST 2 UL-AC CHAIN GUIDE, LINK ARM 2 UL-AC WASHER, FDR,.31 X 1.25 SST BLK OXIDE (BAG OF 10) SCREW, BHS, 5/16-18 X 3/4 SST BLK OXIDE (BAG OF 10) RIVET, 1/8 X 1/2, BLIND ALUM (BAG OF 10) BUMPER, RUBBER 2 V2-AC-86 7 DECAL, PROPER LOADING WASHER, FLT,.641 X.904 X.015 NYLON SOCKET, FLAT, 1/4-20 X 3/4 (BAG OF 10) BRACKET WLDT, HANDRAIL SUPPORT, RH 2 UL-AC SBH, 1/4-20 X 5/8 BLK. OXD. SST (BAG OF 10) NUT, HEX, 1/4-20 (BAG OF 10) * HANDRAIL, SUPPORT, SHORT 1 UL2400-1G01000 UL-AC A * HANDRAIL, SUPPORT, STD 1 UL2806-2G01000 UL-AC-012 * 1 UL2806-2G02000 UL-AC-012 * 1 UL2810-2G01000 UL-AC-012 * 1 UL2810-3G01000 UL-AC B * HANDRAIL, SUPPORT, LONG 1 UL2808-2G01000 UL-AC-412 * 1 UL2808-3G01000 UL-AC SKID, BRIDGEPLATE 2 UL-BA SCREW, FHP, X 1/4 UNDERCUT (BAG OF 10) MASTER LINK, #40 CHAIN A PROTECTOR, CHAIN (2FT) 2 UL-AC B CHAIN, #40, NICKEL PLATED, 51 PITCHES 2 UL-AC ANCHOR, SUPPORT CHAIN 2 UL-AC CLEVIS, SUPPORT CHAIN, ANCHOR 2 UL-AC NUT, 7/16-14 SQUARE CHAIN, ANCHOR 2 UL-AC-010 SNAPRING, 1/4 (BAG OF 10) SCREW, BHS, 1/4-20 X 1/2 BLACK (BAG OF 10) SCREW, PHP, X 1/2 (BAG OF 10) PIN WLDT, PIVOT BRACKET 2 UL-AC ROLLER, CHAIN 2 UL-PF PIN WLDT, CHAIN ROLLER 2 UL-AC SCREW, PHP, X 3/8 (BAG OF 10) NUT, JAM, (BAG OF 10) PIVOT BRACKET 2 UL-PF BEARING, BRONZE FLANGE,.63 X.75 X.63L PIN, DIA, SNAPRING X UL-AC CHAIN GUIDE, POST 2 UL-AC BUSHING, BRONZE, (MARTIN).25 X.31 X SPRING, UNFOLD, KICKOUT NOTE: (REF) in QTY column is for Referenced Parts Only and are not sold as spare parts. * Part number ONLY applies to corresponding configuration identified in CONFIG column. If no configuration is identified in CONFIG column then part number applies to ALL configurations. ** Reference Only Not for Sale DULP04.A

19 FIGURE 4-4: UNI-LITE PLATFORM POST ASSEMBLY (CONT D) FIG. ITEM DESCRIPTION QTY CONFIG. PART NO. 36 SPRING, EXTENSION,.25 OD X 3.0 LG PIN, O.250 DIA, SNAPRING X UL-AC * LINK, KICKOUT, SHORT 2 UL2400-1G01000 UL-PF A * LINK, KICKOUT 2 UL2806-2G01000 UL-PF-019 * 2 UL2806-2G02000 UL-PF-019 * 2 UL2808-2G01000 UL-PF-019 * 2 UL2808-3G01000 UL-PF-019 * 2 UL2810-2G01000 UL-PF-019 * 2 UL2810-3G01000 UL-PF BUSHING, BRONZE, , 5/16" X 1/4" X 1/4" LNG ROLLER, KICKOUT 4 UL-PF BRACKET WLDT, HANDRAIL SUPPORT, LH 2 UL-AC PIN WLDT, LINK ARM 4 UL-AC PIN, DIA 2 UL-AC COVER W/GUARDS, SWITCH KIT FLANGE BEARING, 3/4 ID (KIT OF 10) * ARM, PARALLEL, BOTTOM, LH 1 UL2400-1G01000 UL-AC * HANDRAIL, W/SWITCH, SHORT, LH 1 UL2400-1G01000 UL-AC A * HANDRAIL, SWITCH, LH, STD 1 UL2806-2G01000 UL-AC-017 * 1 UL2810-2G01000 UL-AC-017 * 1 UL2810-3G01000 UL-AC B * HANDRAIL, SWITCH, LH, LONG 1 UL2808-2G01000 UL-AC-417 * 1 UL2808-3G01000 UL-AC * POST, PLATFORM, STD, SHORT 1 UL2400-1G01000 UL-AC A * POST, PLATFORM, STD 1 UL2806-2G01000 UL-AC-015 * 1 UL2806-2G02000 UL-AC-015 * 1 UL2808-2G01000 UL-AC-015 * 1 UL2808-3G01000 UL-AC * POST, PLATFORM, LH, SHORT 1 UL2400-1G01000 UL-AC A * POST, PLATFORM, LH 1 UL2806-2G01000 UL-AC-019 * 1 UL2806-2G02000 UL-AC-019 * 1 UL2808-2G01000 UL-AC-019 * 1 UL2808-3G01000 UL-AC-019 * 1 UL2810-2G01000 UL-AC-019 * 1 UL2810-3G01000 UL-AC * ARM, PARALLEL, UPPER 2 UL2400-1G01000 UL-AC A * ARM, PARALLEL, UPPER 2 UL2806-2G01000 UL-AC-006 * 2 UL2806-2G02000 UL-AC-006 * 2 UL2808-2G01000 UL-AC-006 * 2 UL2808-3G01000 UL-AC-006 * 2 UL2810-2G01000 UL-AC-006 * 2 UL2810-3G01000 UL-AC-006 NOTE: (REF) in QTY column is for Referenced Parts Only and are not sold as spare parts. * Part number ONLY applies to corresponding configuration identified in CONFIG column. If no configuration is identified in CONFIG column then part number applies to ALL configurations. ** Reference Only Not for Sale 32DULP04.A 4-19

20 FIGURE 4-4: UNI-LITE PLATFORM POST ASSEMBLY FIG. ITEM DESCRIPTION QTY CONFIG. PART NO. 51 SCREW, HSS, 1/4-20 X 3/ * ARM, PARALLEL, BOTTOM, LH, SHORT 1 UL2400-1G01000 UL-AC A * ARM, PARALLEL, BOTTOM, LH 1 UL2806-2G01000 UL-AC-041 * 1 UL2806-2G02000 UL-AC-041 * 1 UL2808-2G01000 UL-AC-041 * 1 UL2808-3G01000 UL-AC-041 * 1 UL2810-2G01000 UL-AC-041 * 1 UL2810-3G01000 UL-AC KICKOUT, CHANNEL 2 UL-PF WASHER, FLT,.406 X.812 X.065 (SAE) (BAG OF 10) BEARING, BRONZE FLANGE,.25 X.38 X.38L * ASSY, HANDRAIL, SWITCH, SHORT 1 UL2400-1G01000 UL-AC A * ASSY, HANDRAIL, SWITCH, STD 1 UL2806-2G01000 UL-AC-058 * 1 UL2810-2G01000 UL-AC-058 * 1 UL2810-3G01000 UL-AC B * ASSY, HANDRAIL, SWITCH LONG 1 UL2808-2G01000 UL-AC-458 * 1 UL2808-3G01000 UL-AC * ASSY, KICKOUT SHORT 1 UL2400-1G01000 UL-PF A * ASSY, KICKOUT STD 1 UL2806-2G01000 UL-PF-033 * 1 UL2806-2G02000 UL-PF-033 * 1 UL2808-2G01000 UL-PF-033 * 1 UL2808-3G01000 UL-PF-033 * 1 UL2810-2G01000 UL-PF-033 * 1 UL2810-3G01000 UL-PF GUIDE, CHAIN 1 UL-AC NUT, ESN, 1/4-20 THIN SCREW, BHS, 1/4-20 X TUBING, GREY VINYL, 5/8 ID X 2 FT. 2 UL-AC SPACER, PVC, 0.81 ID X 0.87 L 2 UL-AC WASHER,FLT,.406 X.812 X.065 (SAE) (BAG OF 10) ROLLER, KICKOUT,.750 D X UL-PF SCREW, PHP, 6-32 X 3/8 (BAG OF 10) NUT, HEX, 6-32 (BAG OF 10) NOTE: (REF) in QTY column is for Referenced Parts Only and are not sold as spare parts. * Part number ONLY applies to corresponding configuration identified in CONFIG column. If no configuration is identified in CONFIG column then part number applies to ALL configurations. ** Reference Only Not for Sale DULP04.A

22 Power... electro-mechanical Motor rating Volt DC, 63 amp avg./cycle Lift weight lbs. APPENDIX 1 LIFT SPECIFICATIONS UNI-lite WHEELCHAIR LIFT Rated load capacity lbs. Manual backup... speed-wrench operated A H C J B G I F E D RSM MODEL DIMENSIONS (inches) A B C D E F G H I J Width, Stationary Frame Height, Lift Installation Depth (Folded) Usable Platform Width Usable Platform Length Floor- to- Ground Travel Width, Traveling Frame Clear Entry Height Floor to End of Platform, folded Width, Base Plate UL2400 Short UL2806 Standard UL2806 Standard UL2808 Standard UL2808 Tall UL2810 Standard UL2810 Tall DULP04.A

24 -BACK TO TOP-