HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC AIRPORT ROAD POCAHONTAS ARKANSAS 72455

Transcription

1 HC-3000 SERIES RAKE Parts Breakdown 1

2 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3, HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND

3 POSITION PART NUMBER DESCRIPTION QTY POSITION PART NUMBER DESCRIPTION QTY CLEVIS CLEVIS BOLT CLEVIS LOCK WASHER CLEVIS NUT JACK 10 SIDE CRANK HOSE HOLE GROMMET CART 8 WHEEL, 10 WHEEL CART 12 WHEEL DUST CAP WHEEL STUD LUG NUT DURABILT DURARAKE DECAL RH DURABILT DURARAKE DECAL LH HC-3108 DECAL HC-3110 DECAL HC-3112 DECAL SPINDLE FOR STANDARD TIRE 19/6/1 2 SPINDLE FOR OPTIONAL TIRE 26/12/ TIRE AND WHEEL 19/6/R MADE IN USA LABEL SPINDLE RETAINING BOLT SPINDLE RETAINING NYLON LOCK NUT HUB ASSEMBLY COMPLETE GREASE SEAL INNER BEARING INNER BEARING RACE OUTER BEARING OUTER BEARING RACE SPINDLE NUT, WASHER, COTTER PIN KIT 2 3

4 28,29,30,31 12, SPRING ADJUSTER PARTS 8 THRU 11 14,1, ,,6,7 WING ADJUSTER LEVER PARTS 21 THRU

5 POSITION PART NUMBER DESCRIPTION QTY POSITION PART NUMBER DESCRIPTION QTY SPRING TOWER ASSEMBLY RH SPRING TOWER ASSEMBLY LH GREASE DAILY DECAL CAUTION: STAY CLEAR WHEN OPERATING DECAL OUTER ADJUSTER TUBE PIN RETAINER OUTER ADJUSTER TUBE PIN ROLL PIN OUTER ADJUSTER TUBE PIN GREASE FITTING SPRING ADJUSTER BRACKET (8 & 10 WHEEL) SPRING ADJUSTER BRACKET (12 WHEEL) SPRING ADJUSTER BRACKET SLIDE BOLT SPRING ADJUSTER BRACKET WASHER SPRING ADJUSTER BRACKET NUT SPRING ADJUSTER BOLT SPRING ADJUSTER BOLT WASHER ADJUSTER TUBE UP STOP ADJUSTER TUBE UP STOP BOLT ADJUSTER TUBE UP STOP NUT WING SUPPORT SPRING ADJUSTER TUBE (OUTER) ADJUSTER SLIDE TUBE (INNER) SLIDE TUBE ADJUSTER HANDLE SLIDE TUBE ADJUSTER HANDLE ATTACHMENT NUT 4 SLIDE TUBE ADJUSTER HANDLE ATTACHMENT WASHER SLIDE TUBE ADJUSTER HANDLE GRIP RH SLIDE TUBE ADJUSTER HANDLE GRIP LH SLIDE TUBE ADJUSTER HANDLE LINK SLIDE TUBE ADJUSTER HANDLE TO LINK BOLT SLIDE TUBE ADJUSTER HANDLE TO LINK NUT SLIDE TUBE ADJUSTER HANDLE TO LINK WASHER WING PIVOT PIN RETAINER WING PIVOT PIN ROLL PIN - WING PIVOT PIN RETAINER GREASE FITTING RAKE WHEEL ANGLE ADJUSTMENT PIN (RED) RAKE WHEEL ANGLE ADJUSTMENT PIN (BLACK) SLIDE TUBE ADJUSTER PIN (RED) SLIDE TUBE ADJUSTER PIN (BLACK) 2

6 6 7 2,3 4 8,9,10 1 6

7 POSITION PART NUMBER DESCRIPTION QTY TRANSPORT LOCK PIN (RED) TRANSPORT LOCK PIN (BLACK) PIVOT PIPE LOCK BOLT PIVOT PIPE LOCK NUT PIVOT PIPE LOCK PIVOT PIPE ASSEMBLY RH PIVOT PIPE ASSEMBLY LH GREASE FITTING GREASE DAILY DECAL PIVOT MOUNT BOLT PIVOT MOUNT WASHER PIVOT MOUNT NUT 8 7

8 ,6,

9 POSITION PART NUMBER DESCRIPTION QTY PLASTIC CAP 3 X 3 SQUARE GREASE DAILY DECAL SINGLE WHEEL ARM PIN SINGLE WHEEL ARM ASSEMBLY RH (10 WHEEL RAKE ONLY) SINGLE WHEEL ARM ASSEMBLY LH (10 WHEEL RAKE ONLY) SINGLE RAKE WHEEL ARM SPRING EYE BOLT (10 WHEEL ONLY) SINGLE RAKE WHEEL ARM SPRING EYE BOLT NUT (10 WHEEL ONLY) 4 SINGLE RAKE WHEEL ARM SPRING EYE BOLT WASHER (10 WHEEL ONLY) 4 SINGLE RAKE WHEEL ARM SPRING (10 WHEEL ONLY) SINGLE RAKE WHEEL ARM CAP DOUBLE RAKE WHEEL ARM ASSEMBLY RH DOUBLE RAKE WHEEL ARM ASSEMBLY LH RAKE MAIN ARM 8 WHEEL RH RAKE MAIN ARM 8 WHEEL LH RAKE MAIN ARM 10 WHEEL RH RAKE MAIN ARM 10 WHEEL LH RAKE MAIN ARM 12 WHEEL RH RAKE MAIN ARM 12 WHEEL LH 1 9

10 ,

11 POSITION PART NUMBER DESCRIPTION QTY HYDRAULIC HOSE ¼ X HYDRAULIC CYLINDER 3 X HYDRAULIC CYLINDER PIN HYDRAULIC CYLINDER PIN RETAINER ADAPTER ½ NPT MALE TO 3/8 JIC MALE ELBOW 3/8 NPT MALE TO 3/8 JIC FEMALE SWIVEL BUSHING ½ NPT MALE TO 3/8 NPT FEMALE FLOW CONTROL VALVE HOSE HOLE GROMMET BEADING MATERIAL LARGE FRAME OPENING AT CHECK VALVES 18 11

12 1 HYDRAULIC SCHEMATIC FLOW CONTROL 3 3 FLOW CONTROL ,7,8 6,7,8 TO TRACTOR 12

13 POSITION PART NUMBER DESCRIPTION QTY HYDRAULIC CYLINDER 3 X FLOW CONTROL VALVE /8 JIC MALE CROSS HYDRAULIC HOSE ¼ X CHECK VALVE ASSEMBLY HYDRAULIC HOSE ¼ X 10 (8 AND 10 WHEEL RAKES) HYDRAULIC HOSE ¼ X 186 (12 WHEEL RAKE) ADAPTER 3/8 JIC MALE TO ½ NPT MALE HYDRAULIC CONNECTOR MALE (PIONEER) CAP 3/8 JIC 2 13

14 POSITION PART NUMBER DESCRIPTION QTY RAKE WHEEL HUB COMPLETE RAKE WHEEL ATTACHMENT BOLT RAKE WHEEL ATTACHMENT LOCK WASHER 6 2,3, RAKE WHEEL ATTACHMENT NUT RAKE WHEEL COMPLETE RH RAKE WHEEL COMPLETE LH RAKE WHEEL TINE

15 6 2,3,4 1 POSITION PART NUMBER DESCRIPTION QTY PLASTIC CAP 3 SQUARE TRANSPORT STOP PAD TRANSPORT STOP PAD RETAINING BOLT TRANSPORT STOP PAD WASHER RUBBER GROMMET (KICKER WHEEL HOSE HOLE) RUBBEE GROMMET (CYLINDER HOSE HOLE) 2 1

16 (located on top of pivot pipe at transport lock hole) (located on top of tongue at hitch clevis) FOR SINGLE SIDE RAKING SLIDE WINGS ALL THE WAY IN (located on top of tongue at hitch clevis) MAXIMUM SAFE TOWING SPEED 2 MPH (located on top of pivot pipe at transport lock hole) ALWAYS USE WARNING FLASHERS ON TRACTOR EXCEPT WHEN PROHIBITED BY LAW ALWAYS SLIDE WINGS ALL THE WAY IN FOR TRANSPORT (located on top of frame in front of hydraulic cylinders) PINCH POINT. Keep hands and fingers clear

17 ( Top of tongue just below hose hole) 1. Read and understand the operator s manual. 2. Stop the tractor engine before leaving the operator s platform. 3. Keep riders off the machine. 4. Make certain everyone is clear of machine before starting the tractor engine and operating.. Keep all shields in place. 6. Never lubricate, adjust or service the machine with tractor engine running. 7. Wait for all movement to stop before servicing. 8. Keep hands, feet and clothing away from moving parts. 9. Use flashing warning lights when operating on highways except when prohibited by law ( Front of spring tower right side up when rake is in working position) STAY CLEAR WHEN OPERATING. Read and understand instruction manual before operating STAY CLEAR OF MACHINE WHILE FOLDING AND WHILE IN OPERATION ( Front of wing adjuster tube left side of pin hole and Underside of wing on triangle plate right side up when folded in transport position)

18

19 19

20 Durabilt Industries, LLC Pocahontas, AR 724 Phone