ANNIVERSARY SPECIALS ANNIVERSARY SPECIALS MEASURLINK REAL TIME STANDARD. INPUT TOOL SERIES 264 Digimatic Gauge/Data Input Device Free

Transcription

1 FALL 2013 ANNIVERSARY EDITION Check out our FANTASTIC FINDS and enjoy extra savings on specially selected items for a limited time. Distributed by Prices in effect from Sept 3 to Dec 20, 2013 or while quantities last. Anniversary specials are valid for a limited time only as noted. Some items may not be exactly as shown. FANTASTIC FINDS DAYS ANNIVERSARY SPECIALS Prices valid on these 3 items from Oct 13 to Nov 21, 2013 only ABSOLUTE DIGIMATIC CALIPER SERIES 500 EVERY Prices valid on these 3 items from Nov 22 to Dec 20, 2013 only ABSOLUTE COOLANT PROOF DIGIMATIC CALIPER SERIES 500 MEASURLINK REAL TIME STANDARD EVERY FANTASTIC FINDS DAYS OUR MOST POPULAR BORE GAUGES SERIES 511 Range With 2923SB-10 Dial indicator (Graduation.0001 ) 11 anvils and 2 sub-anvil 4 spacers Order No SALE $ List Price $ % Easily manage the quality levels of your parts, identify problem areas and apply corrective action to areas in need of attention. MeasurLink 7 Real-Time Standard Edition Order No. 64AAB177 $1, ANNIVERSARY SPECIALS INDICATOR & MAGNETIC STAND TOOL KIT 2416S Dial Indicator 7010SN Magnetic Stand Custom Tool Case Order No. 7046PCK SALE $ List Price $ % INPUT TOOL SERIES 264 Digimatic Gauge/Data Input Device Free with every MeasurLink purchase Order No FREE WITH PURCHASE $ Value Prices valid on these 3 items from Sept 3 to Oct 12, 2013 only DIGIMATIC HEIGHT GAUGE SERIES 192 Range 0-12 /300mm SPC data output Coarse/fine feed switching Switchable resolution Two preset reference heights Order No SALE $ List Price $1, : SPC cable (1m) $46.30 $ : SPC cable (2m) $51.00 $45.90 Inputs data through RS-232C communication 40% Range: 0-6 /150mm Resolution:.0005 /0.01mm With SPC output Order No SALE $ List $ OUTSIDE MICROMETER SERIES 103 Range: 0-1 Graduation.001 Ratchet stop 30% DIAL TEST INDICATOR SET SERIES 513 Order No E SALE $ List $ % : SPC cable (1m) $61.50 $ : SPC cable (2m) $69.00 $62.10 Order No SALE $ List Price $91.00 Range 0.2mm Graduation 0.002mm Dial Jeweled bearings, anti-magnetic Resistant to water and dust 40% Range: 0-12 /300mm Resolution:.0005 /0.01mm Without SPC output Order No SALE $ List $ DIGIMATIC DEPTH GAUGE SERIES 571 Range 0-12 /300mm Resolution.0005 /0.01mm Order No SALE $ List $ Range 0-6 Graduation per revolution TiN coating is applied to sliding surface for excellent wear resistance Order No SALE $ List $ % : SPC cable (1m) $61.50 $ : SPC cable (2m) $69.00 $62.10 DIAL CALIPER SERIES % 40%

2 Celebrating FOUR DECADES OF PRECISION PARTNERSHIP You are invited to join us in celebration of our first four decades. Mitutoyo Canada is honoured to have served the Canadian manufacturing industry since Please be our guest as we open our doors in thanks for your support along the way. October 17th, 9am-5pm Seminars & Open House With interior office renovations recently completed, and our updated Metrology Centre - we have a fresh new look! Register today and be our guest: l Seminars l Building Tours l Meals & Refreshments l Application Specialists l Product Demonstrations l Anniversary Promotions l Ask the Expert l Complimentary Gift Pack l See the latest in automated inspection with robotics supplied by ABB Inc. SEMINAR SPACE IS LIMITED. PLEASE REGISTER EARLY TO AVOID DISAPPOINTMENT. See below for registration information and seminar schedule. seminars GD&T GEOMETRIC DIMENSIONING & TOLERANCING Calling all callouts! A look at geometric dimension and tolerancing issues with special focus on understanding the callout conundrum. Thursday October 17 9:00 am 11:00 am 1:30 pm 3:30 pm FORM MEASUREMENT How round is round? Densifying Harmonics. Thursday October 17 9:00 am 11:00 am 1:30 pm 3:30 pm SURFACE FINISH MEASUREMENT From Ra to Rz and everything in between! Thursday October 17 9:00 am 11:00 am 1:30 pm 3:30 pm REGISTRATION IS REQUESTED FOR GENERAL ADMISSION as well as SEMINARS. Seminar space is limited. Please register early to avoid disappointment. SPECIAL OFFER FOR SEMINAR ATTENDEES 50% OFF Metrology Handbook The Science of Measurement #EDU102-10CA while supplies last Mitutoyo Canada Inc Meadowvale Blvd. Mississauga ON L5N 5N1 ask the expert SMALL TOOL REPAIR SHOP Our repair technicians answer your maintenance, repair and tool function questions. CALIBRATION LAB Inquiries regarding our Lab s ISO Accreditation, quality procedures, etc? Our lab technicians can help. APPLICATION CONSULTATION Bring your parts and prints for a consultation with a measurement application specialist. PLEASE REPLY BY OCTOBER 3, 2013 To assist with our preparations, kindly register in advance. We look forward to seeing you! Register Online [email protected] By Phone or Fax Tel. (905) Fax. (905) Data Collection...on the fly U-WAVE WIRELESS SYSTEM Wireless Measurement Communication Wireless data communication from a measuring tool to a PC using the Digimatic protocol. Eliminates long and cumbersome data cables, and allows data to be loaded into any software product that accepts keyboard input, such as Excel or Notepad. U-Wave-R (Receiver) U-WAVE-R comes with setup software, wall bracket and 1m cable. Connect up to 16 U-WAVE-R units to one PC. U-Wave-T (Transmitter) U-WAVE-T (Buzzer type) sends measurement data to U-WAVE-R Connect up to 100 U-WAVE-T units. U-WAVE-T (Transmitter) Transmits data from measuring tools to U-WAVE-R Code Description List SALE 02AZD810D U-Wave-R (Receiver) $ $ AZD880D U-Wave-T (Transmitter-Buzzer type) $ $ AZD730D U-Wave T (Transmitter IP67 type) $ $ U-WAVE dedicated Transmitter connection cable. SAVE Code Description List 22% A 02AZD790A Water-proof CD $ $ B 02AZD790B Water-proof MDC $ $ C 02AZD790C CD-CX $ $ D 02AZD790D 10 pin flat type $ $ E 02AZD790E 6 pin round type $ $ F 02AZD790F Straight flat type $ $ G 02AZD790G ID-N/B $ $ Manage and analyze data with MeasurLink Real Time Plus USB INPUT TOOL DIRECT: USB-ITN Input Tool Direct has been streamlined into a range of dedicated models for each type of measuring instrument. Data collection can start immediately after connecting the measuring instrument to a computer The values displayed on the measuring instrument can be sent to the computer just by pressing the data switch. USB Input Tool Direct Optional Accessory 02AZE200: Transmitter Bracket Kit SALE $27.00 List $30.00 COMPATIBLE WITH The input tool directly connects the measuring instrument to a USB port on a computer This is the same result as that of typing numbers using the keyboard and then pressing Enter. Code Description List SALE 06ADV380A Coolant-proof with Data Switch $ $ ADV380D 10-pin Plain $ $ ADV380F Straight Type $ $ SAVE 14% SAVE 20% U-WAVE-R (Receiver) Loads data received from U-WAVE-T to PC software via USB port HOW TO ORDER U-WAVE: 1. One U-Wave-R required per system (supports up to 100 U-Wave-T units). 2. One U-Wave-T required for each digimatic Mitutoyo tool. 3. Select appropriate cable for each tool (connects measuring tool to U-Wave-T). USB-ITPAK Measurement Data Collection Software This setup and data collection software is used to input data from one or more measuring instruments (connected by way of USB-ITN) to any Excel sheet. (This software package cannot be used with IT-012U.) Code No. 06ADV386 SALE $ List $ Software use requires USB dongle

3 Inside, Depth & Thickness TUBULAR INSIDE MICROMETER SET SERIES 139 Extension Pipe Type Wide range of ID measurements by combining extension pipes and anvils with the micrometer head Travel of micrometer head.5 Range Code List SALE " $ $ DIGIMATIC HOLTEST SET SERIES 468 Interchangeable Head Set Resolution /0.001mm TiN coated measuring contacts Functions include Presetting, Zero/ABS, Auto power on/off, Data hold, Data output Includes one display unit with 4 interchangeable heads, 2 setting rings, extension rod Code Range List SALE mm $3, $3, CZA662: SPC cable (1m/40 ) $ $ CZA663: SPC cable (2m/80 ) $ $ MICROMETER HEADS SERIES 148 Range Details Code Graduation List SALE 0-6.5mm 0 -.5" Ultra Small Type: Flat spindle, Plain Stem (6mm dia.) Small Type: Spherical spindle, Plain Stem (.375" dia.) Small Type: Zero Adjustable Thimble, Plain Stem (.375" dia.) with clamp nut, Spherical spindle TUBULAR INSIDE MICROMETER SET SERIES 133 Single Rod Type Zero point can be readjusted by rotating the micrometer head sleeve Set of 4 gauges Range Code List SALE 2-6" $ $ mm $60.00 $ $68.00 $ " $85.00 $76.50 MICROMETER HEAD SERIES 250 with Digit Counter Carbide tipped measuring face Ratchet stop Stem dia. 10mm Plain stem with flat (carbide tip) spindle face Range Code List SALE 0-25mm $ $ SMALL HOLE GAUGE SERIES 154 Used with outside micrometer for measuring inside diameter of bores Range Code List SALE.2 -.3" dia $27.00 $24.30 DEPTH MICROMETER SERIES 129 Interchangeable Rods Graduation.001 Ratchet stop Code Range Base Rods List SALE $ $ x $ $ x.63 $ $ VERNIER DEPTH GAUGE SERIES 527 Hardened stainless steel With fine adjustment DIGITAL THICKNESS GAUGE SERIES 547 Flat Anvil Type Quick and efficient inspection with convenient grip handle, thumb trigger and spring-loaded spindle Ideal for measuring thickness of paper, film, wire, sheet metal and similar materials With digimatic IDC indicator : SPC cable (1m) $46.30 $ : SPC cable (2m) $51.00 $45.90 Range Code Resolution List SALE "/ 0-12mm S.00005"/ 0.001mm $1, $ Range Code Graduation List SALE 0-40" " $ $

4 Micrometers COOLANT PROOF MICROMETER SERIES 293 with IP65 Protection Level IP65 protection level, enabling using in environments exposed to cutting oil, etc. Resolution: /0.001mm With a standard bar Ratchet stop With or without SPC output Code Range SPC List SALE Output * 1-2 / No $ $ mm Yes $ $ CZA662: SPC cable with data switch (1m/40 ) $ $ CZA663: SPC cable with data switch (2m/80 ) $ $ DIGIMATIC MICROMETER SERIES 293 MDC-Lite Provided only with a zero set and in / mm keys Resolution: /0.001mm Friction thimble No spindle clamp. No data output DIGIMATIC SCREW THREAD MICROMETER SERIES 326 Interchageable Anvi-Spindle Tip Type Range Code List SALE 0-1"/2 5.4mm $ $ shown with optional anvils "UNI-MIKE" SERIES 117 Interchangeable Anvil Type Measures tubing thickness, shoulder edge distance, rivet head height, etc. Supplied with Flat and Rod anvil (V and Disk anvils optional OUTSIDE MICROMETER SERIES 103 Baked Enamel Finish Using flat anvil (201216) Range Graduation Code List SALE 0-25mm 0.01mm $ $ BLADE MICROMETER SERIES 122 Non-rotating spindle type Anvil and spindle have a blade for measuring groove diameter of shafts, keyways, etc. Ratchet stop With the disk anvil (950758) the Uni-Mike is used as a height micrometer 60 ø6 Type A ø6 R ø6 QUANTUMIKE MICROMETERS SERIES 293-4x spindle speed 6 Type B 60 ø6 R ø Order No SALE $ List Price $792 Range 1-2 / mm Optional anvil/spindle tips Resolution: /0.001mm Ratchet stop, with SPC output 05CZA662: SPC cable with data switch (1m/40 ) $ $ CZA663: SPC cable with data switch (2m/80 ) $ $ Range Graduation Code List SALE 0-1".0001" $ $ With standard bar (except 0-1 / 0-25mm models) Code Range Graduation List SALE mm Ratchet 0.01mm $ $ Ratchet $ $ Ratchet.001 $ $ Ratchet $ $ Friction $ $ Ratchet $ $ Ratchet $ $ Ratchet $ $ Ratchet $ $ Ratchet $ $ Type D Mitutoyo s (carbide-tipped) patented high precision lead screw feeds the spindle by 2mm per revolution of the thimble instead of the standard 0.5mm Resolution: /0.001mm Patented ratchet thimble mechanism Type C (carbide-tipped) Code Range Remarks List SALE /25.4mm No SPC $ $ / mm SPC $ $ CZA662: SPC cable with data switch (1m/40 ) $ $ CZA663: SPC cable with data switch (2m/80 ) $ $ SAVE 22% SAVE 18% 4

5 Calipers ABSOLUTE DIGIMATIC CALIPER SERIES 500 Zero-Set at any slider position along the scale for comparison measurements SPC data output Optional Accessories MSLP SALE : SPC cable (1m) $61.50 $ : SPC cable (2m) $69.00 $62.10 Range Code Resolution List SALE 0-8"/200mm $ $ "/0.01mm 0-12"/300mm $ $ ABSOLUTE COOLANT-PROOF CALIPERS SERIES 500 IP67 Protection Can be exposed to coolant, water, dust or oil Some models have SPC data output Optional Accessories MSLP SALE 05CZA624: SPC cable (1m) $ $ CZA625: SPC cable (2m) $ $ Range Code Resolution List SALE 0-150mm mm $ $ "/200mm * Carbide tipped OD & ID jaws $ $ "/0.01mm 0-8"/200mm $ $ *No SPC DIAL CALIPERS SERIES 505 Smooth sliding movement and high shock protection Titanium coating on sliding surfaces Range per revolution.1 VERNIER CALIPERS SERIES 530, 532 Measures OD, ID, Depth, Steps With metric/inch dual scale Range Code Graduation List SALE 0-6" Orange Dial $ $ " 0-6" Carbide tipped OD jaws $ $ Range Code Graduation List SALE 0-150mm 0-6" 0-130mm 0-5 " Standard Model With Fine Adjustment Upper:.001" Lower: 0.02mm $98.00 $88.20 $ $ ABSOLUTE SOLAR CALIPERS SERIES 500 No battery or origin reset needed Can be used continuously above 60 Lux Hard coated solar panel for durability With SPC data output : SPC cable (1m) $61.50 $ : SPC cable (2m) $69.00 $62.10 Range Code Resolution List SALE 0-4"/100mm * $ $ "/0.01mm 0-8"/200mm $ $ *with.075 round depth bar ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 With interchangeable jaws (optional) CZA624: SPC cable (1m) $ $ CZA625: SPC cable (2m) $ $ shown with optional jaws Order No SALE $1, List Price $1, Range 0-24 /0-600mm Unique clamping mechanism for quick Resolution.0005 /0.01mm and easy jaw change With SPC output The range of applications can be expanded by using interchangeable jaws (optional) 5

6 Indicators & Stands DIAL INDICATOR SERIES 2 Standard Type 2415S 2046S Range Code Remarks Graduation Range/Rev Dial List SALE 5mm 2044S-60 ISO Type, Stem dia. Ø8mm 0.01mm 1mm $ $ mm 2046S ISO Type, Stem dia. Ø8mm 0.01mm 1mm $ $ " 2415S ANSI/AGD Type, Stem dia. 3/8".001".1" $ $ mm 2231S-01 ANSI/AGD Type, Stem dia. 3/8", Yellow Dial Face 0.01mm 1mm $ $ " 2802S-10 ANSI/AGD Type, Stem dia. 3/8".0001".01" 0-10 $ $ ABSOLUTE DIGIMATIC INDICATOR ID-F SERIES 543 With Back-lit LCD Screen If a judgement result is out of tolerance, the display backlighting changes from green to red Analog bar indicator Resolution 0.001mm//0.01mm Stem dia. 3/8 SPC data output Optional Accessories List SALE : SPC cable (1m) $66.80 $ : SPC cable (2m) $95.00 $85.50 Code Range List SALE A 50mm $ $ DIAL INDICATOR SERIES 0 Compact Type ISO/JIS type - stem dia. 8mm Dial: Lug back Range Code Graduation List SALE Range/Rev.: 1mm 2.5mm mm $ $ ABSOLUTE DIGIMATIC INDICATOR ID-C SERIES 543 Max/Min Value Holding Function Code Range Resolution List SALE B Flat back Lug back.5/12.7mm ANSI/AGD type - stem dia. 3/8 Maximum, minimum or runout value can be displayed during measurement High speed sampling ration of 50 times/s SPC Data output.0001"/0.001mm $ $ "/0.001mm $ $ ABSOLUTE DIGIMATIC INDICATOR ID-C SERIES 543 Standard Type B Optional Accessories MSLP SALE : SPC cable (1m) $46.30 $ : SPC cable (2m) $51.00 $45.90 Code Range Resolution List SALE B.5/12.7mm.0005"/0.01mm $ $ B 2"/50.8mm.00005"/0.001mm $ $ ANSI/AGD type - stem dia. 3/8 GO/NG judgment can be performed by setting upper and lower tolerance limits Positive/negative count resulting from the spindle s up and down movement can be toggled SPC Data output Optional Accessories MSLP SALE : SPC cable (1m) $46.30 $ : SPC cable (2m) $51.00 $45.90 ABSOLUTE DIGIMATIC INDICATOR ID-N SERIES 543 Slim Type Slim body design (1.38 wide) is ideal for multipoint measurements LCD readout-rotation function Resolution.0005 /0.01mm Stem dia. 3/8 SPC data output Code Range List SALE /12.7mm $ $ Optional Accessories List SALE 21EAA194: SPC cable (1m) $51.00 $ EAA190: SPC cable (2m) $60.00 $54.00 INDICATOR & GAUGE STANDS S-10 Code Description List SALE S Dial gauge stand with serrated anvil Dial gauge stand with flat anvil Magnetic stand with Fine adjustment Magnetic Flexi standfor Dial Test Indicator $ $ $ $ $98.00 $88.20 $ $

7 Indicators & Linear Gauging FEATURES OF S SERIES Dial Indicators Limit hand Clamping range Clearance to avoid direct influence of clamping force Weight 150g Deviation (µm) Error (µm) 7 ONE REVOLUTION 6 INDICATOR SERIES 2 One Revolution Type One revolution for error-free 4 reading Dial ISO type, Stem dia. 8mm 2 Flat back Shockproof, with jeweled 1 bearings Endurance testing with cam Rotation speed: 120rpm Revolutionary stem-bush design for trouble free stem clamping (longer clamping range). No through screw-hole on the frame for high dust resistance. Involute curved lifting lever for smooth movement of spindle and dovetail joint for tool-less connection. Grater rigidity in the bearing plate for reducing the retracing error (20%) and 4-screw mounting for increasing impact resistance Result of repeat impact test Pointer deviation Code Range/Full stroke Graduation List SALE 2901SB /0.2mm 0.001mm $ $ A Result of endurance test wide-range accuracy B B 2109S-10 dial indicator C D Drop height (cm) 2109S-10 dial indicator A D C E Thousand times Weight 150g Endurance testing with cam Rotation speed: 120rpm Code Deviation (µm) Bezel clamp 2109S-10 dial indicator B 10 Stem C 0-10 Spindle D Contact point Drop height (cm) Error (µm) 7 DIAL INDICATOR SERIES 1 Compact Type 1410SB Flat back 1411S Lug Back ANSI/AGD type Stem dia. 3/8 Range / Range/Rev " /.1".001" Result of repeat impact test Pointer deviation A Result of endurance test wide-range accuracy B 2109S-10 dial indicator A D C E Thousand times Graduation Dial List SALE $ $ $ $98.10 LGS LINEAR GAUGE SERIES 575 Compact size with Digimatic Output Designed to fit into tight spaces Absolute linear encoder with unlimited maximum response speed Code Range Resolution Stem Dia. List SALE mm 0.01mm 8mm $ $ ".0005" 3/8" DIA $ $ Code EV COUNTER SERIES 542 For Multi-Gauge Systems Digimatic code (SPC) input Use with LGS, LGD, LDG-M linear gauges Connect up to 6 gauges to one counter Connect up to 10 counters using RS link Various output modes to choose from Multi-function Internal Resolution (no display capability).00005",.0005"/0.001mm,.01mm List SALE $1, $1,

8 STEEL RULES SERIES 182 Wide Rigid Rules (Thickness 3/64") Other Reference gauges Size Code Graduation Width List SALE 6" (3R) * 11/32, 1/64, 1/10, 1/50th 3/4" $10.00 $ " (5R) /32, 1/64, 1/10, 1/100th 13/16" $42.00 $ x 450mm /32, 1/64, 1mm, 0.5mm 13/16" $42.00 $37.80 Full Flexible Rules (Thickness 1/64") 6" (4R) /8, 1/16, 1/32, 1/64th 1/2" $16.00 $ " (3R) /32, 1/64, 1/10, 1/50th 1/2" $16.00 $ " (16R) * 1/32, 1/64, 1/50, 1/100th 1/2" $16.00 $14.40 *Black chrome BEVEL PROTRACTOR SERIES 187 Consists of three sheets of stainless steel, the middle of which is made for angle measurements Centre black knob locks the blade position Protractor graduation 0-90 o, 90-0 o Range Code List SALE 1 o / 5 min $ $ STEEL SQUARES SERIES 916 Size Code Squareness Type List SALE 3 x 2" Beveled $ $ x 5" " Beveled with beam $ $ x 8" " Regular $ $ POCKET COMPARATOR & RETICLE SET Order No SALE $95.40 List $106 THICKNESS GAUGE SERIES 184 Detatchable Leaves DIAL THICKNESS GAUGE SERIES 7 Ceramic spindle/anvil X Pocket Comparator & reticle Range mm Blade length 150mm Straight blade 13mm wide 20 leaves Order No S SALE $50.40 List $56.00 Range Graduation Code List SALE 0-10mm 0.01mm 7331S $ $ DIAL DEPTH GAUGES SERIES 7 Wide probing range is available with the supplied extension rod Bottom surface of base is hardened, ground and lapped for highest degree of flatness CLEAR LOUPE SERIES 183 Drawtube removable Magnification Code List SALE 10X $33.00 $29.70 RADIUS GAUGE SERIES 186 Size 1-7mm Leaves: 34 pairs 180 o arc Order No SALE $37.80 List $42.00 DIAL CALIPER GAUGE SERIES 209 External Measurement Type Comparison gauge only. Should be used with setting ring or micrometer Caliper is spring loaded and makes point contact at constant measuring pressure Order No SALE $ List $ Range 0-1 Resolution.0005 Max Measuring Depth 3.2 Range Code Graduation Stroke Ext. Rod Base List SALE 0-200mm mm 10mm 5 pcs. 63.5x16mm $ $ " 7218S.001" 1" 4 pcs. 4 x.63" $ $ OUTSIDE MICROMETER SERIES 101 Tapered for hard to reach areas Satin-chrome finish Range Graduation Code List SALE 0-1".0001" $ $

9 Build your own DRO Package SAVE 15% ON SCALES & COUNTER. SAVE 10% ON BRACKET KITS. Package consists of: One X Axis Scale (your choice) One Y Axis Scale (your choice) KA Counter (2 or 3 axis) Bracket kits & mounting hardware is optional DRO PACKAGES: Code Description List Discount SALE A KA Counter (2-axis) $599 15% $ A KA Counter (3-axis) $743 15% $ Your choice X-axis (choose below) see 15% see table table Your choice Y-axis (choose below) 15% Bracket Kit for Lathes Order No. 64AAB191 SALE $ List $307 Bracket Kit for Grinders Order No. 64AAB194 SALE $ List $425 Absolute System Patented by MITUTOYO Bracket Kits for Milling Systems (Order items separately as required) List SALE 64AAB196 Universal bracket kit (12 ) $254 $ AAB197 Universal bracket kit (14-16 ) $259 $ AAB199 Screw kit $ 42 $ Other Accessories (all Systems) 64AAB200 Machine Arm Kit (KA Counter) $213 $ New Linear Encoders from Mitutoyo Innovative technology for your linear motion systems ST700 Series Small Detection Head features ABSOLUTE linear scale. The thinnest detection head in the world contributes to building space-saving systems. ST46-EZA Series Equipped with EZA functionality, offering simple installation without oscilloscope, improving setup time and accuracy. Ask your distributor or Mitutoyo representative for more information. AT715 LINEAR SCALES Code Graduation List SALE AT715-4"/100 $378 $ AT715-6"/150 $378 $ AT715-8"/200 $380 $ AT715-12"/300 $384 $ AT715-14"/350 $386 $ AT715-16"/400 $390 $ AT715-18"/450 $395 $ AT715-20"/500 $399 $ AT715-24"/600 $410 $ AT715-28"/700 $415 $ AT715-30"/750 $425 $ AT715-32"/800 $430 $ T715-36"/900 $458 $ AT715-40"/1000 $475 $ AT715-44"/1100 $495 $ AT715-48"/1200 $542 $ AT715-52"/1300 $574 $ AT715-56"/1400 $607 $ AT /1500 $643 $ AT715-64"/1600 $678 $ AT715-68"/1700 $722 $ AT715-72"/1800 $757 $ AT715-80"/2000 $954 $ AT715-88"/2200 $1,029 $ AT715-96"/2400 $1,221 $1, AT "/2600 $1,438 $1, AT "/2800 $1,535 $1, AT "/3000 $1,600 $1, Digimatic Scale Units Enclosed Linear Scales Absolute Linear Scales Open Type Linear Scales DRO Counters DRO Packages Accessories Image Correlation Encoder 9

10 Laser Scanning LASER SCAN MICROMETER & DISPLAY UNIT PACKAGES FEATURES High accuracy non-contact measuring system Selectable resolution Includes laser scan micrometer and LSM-6200 display unit A (Inch/Metric) Specifications 38% OFF MSLP 43% OFF MSLP 38% OFF MSLP Package: Order No. SALE MSLP Scanning Range Measuring Range Resolution LSM-500S + LSM A $6, List $ 10,454 LSM-501S + LSM A $5, List $ 9,780 LSM-503S + LSM A $6, List $10,117 Up to.49 (12.5mm) Up to.74 (19mm) Up to 1.3 (34mm).0002 to.08 (0.005 to 2mm).004 to.08 (0.1 to 2mm) to.0005" ( to 0.01mm) [Selectable].002 to.4 (0.05 to 10mm) to.0005" ( to 0.01mm) [Selectable].012 to 1.18 (0.3 to 30mm) to.005" ( to 0.1mm) [Selectable] Optional Accessories List SALE 02AGD110 Calibration gauge set (ø0.1mm, ø2.0mm) for LSM-500S $ $ AGD120 Calibration gauge set (ø0.1mm, ø10mm) for LSM-501S $ $ AGD130 Calibration gauge set (ø1mm, ø30mm) for LSM-503S $ $ QUICKTOOL QUICKTOOL is a free software program that makes programming the LSM-6200 quick and easy. Includes installation and calibration. Travel related expenses extra. HOW DO LASER SCAN MICROMETERS WORK? Rotating Mirror In this case, the time the photo receptor doesn t see light is converted to a linear dimension. TYPICAL LSM APPLICATIONS Pulsing Laser Lens Laser Light Blocked Photo Receptor A Laser Scan Micrometer (LSM) uses time to derive a linear dimension. Depending on the type of measurement required, the LSM uses the time it sees light or doesn t see light, to derive a linear dimension. In the case of a round rod, the LSM is set to derive a dimension based on the time it doesn t see light. In the case of the width of a slot, the LSM uses the time is sees light to derive a dimension. Diameter Glass fibre or wire IC chip lead spacing Film sheet thickness Measuring tape width Form measurement 10

11 Coordinate Measuring CRYSTA-Plus M443 MANUAL CMM PROMOTION Mitutoyo manual floating type CMMs were developed in quest for high-accuracy, low cost and easy operation. Suited for a wide range of measuring applications from simple dimension to complex form. High accuracy ( L/1000)µm Measuring range: 400 x 400 x 300mm (XYZ) For shop floor use (temperature compensation optional for 15 to 30 o C) High-precision air bearings One-touch air clamp and fine feed for rapid positioning Vibration isolation system MCOSMOS inspection software CRYSTA-PLUS M443 Package 400 x 400 x 300mm (X,Y,Z) $19,869 USD Package includes: CRT-PM443 Main unit MH20 Probe Head PS7R 5-way Stylus Level 1 MCOSMOS software for Manual CMM PC system Colour printer MH20 Touch Trigger Probe with Manual Probe Head Compact probe module greatly aids in probing complex portions of a workpiece. Easy position change - no tools required for orientation change of probe head. Package price includes Installation, Calibration, 2 Days Training Travel related expenses (air fare, car rental etc. may apply) MCOSMOS Modular CMM Software L1 A versatile software suite providing fully flexible measurement capabilities. From basic geometry to advanced GD&T. Offer valid from September 3 to December 20,

12 Enter The Challenge YOU Canada's big winner will make large production improvements and receive significant technical and purchasing assistance Application submission due DECEMBER 31, 2013 If your company's project is chosen as the winning submission for The Innovation Challenge, your team will work with the teams from The Innovation Challenge sponsor companies to jointly analyze your needs and devise innovative solutions to improve your productivity. The goal of the contest is to take an existing production run with a track record of production data and dramatically improve your productivity, using innovative ideas and technology. The Canadian company with the winning submission will receive thousands of dollars worth of engineering, technical and purchasing assistance. Results of The Innovation Challenge will be published in Shop Metalworking Technology Magazine (respecting the need to protect competitive information) *Confidentiality agreements will be respected. COULD BE SELECTED! APPLY TODAY. The Innovation Challenge contest is being sponsored by Mitutoyo Canada, Mazak, Sandvik, Enable Capital, Shop magazine, and McMaster University. Mitutoyo and the other partners are offering to apply our collective expertise to the task of advising the most efficient and productive methods from our combined technologies, to produce quality parts. We will be working collaboratively, as a group with all sponsors, bringing our years of experience in our respective fields of expertise to formulate an overall solution to improve a customer s process and ultimately productivity. The entire process will be documented by SHOP magazine and will be reported in ongoing articles. McMaster University, a highly respected institution, will compare the before and after data to determine the benefits realized. We look forward to working with the finalist and committing our experts towards creating an effective and measurable success. Peter Detmers, Vice President - Sales Mitutoyo Canada Inc. For application details & submission requirements go to: Sponsors of The Innovation Challenge Assistance will come from sponsors of THE INNOVATION CHALLENGE: Machine Tool builder Mazak Canada; Cutting Tools manufacturer Sandvik Coromant Canada; Metrology supplier Mitutoyo Canada and Finance company Enable Capital Corporation. Mitutoyo Canada Inc. Toronto (905) Montréal (514) Data analysis and interpretation will be provided by the McMaster Manufacturing Research Institute (MMRI). Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring Sensor Systems Test Equipment and Seismometers Digital Scale and DRO Systems Small Tool Instruments and Data Management Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We, therefore, reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the products are subject to Canadian Export Administration Regulations. Re-export or relocation of Mitutoyo products may require prior approval by an appropriate governing authority. We have tried to be as accurate as possible, however, there may be some errors in text, specifications or price. Please confirm with your customer service rep. Some items may not be exactly as shown. Prices are in Canadian dollars, unless otherwise specified. Applicable taxes and shipping charges are extra Mitutoyo Canada Inc., Mississauga ON Canada We reserve the right to change specifications and prices without notice.