Tennessee Gas Association
|
|
|
- Brittney Allen
- 10 years ago
- Views:
Transcription
1
2 Environmental, Health, and Safety These courses promote sound work practices and are designed to satisfy many of the environmental, health, and safety regulations for initial and refresher employee training. 001 Introduction to OSHA: Worker Rights (60 mins) 002 Introduction to OSHA: Employer Responsibilities (60 mins) 100 Anthrax Awareness (40 mins) 101 Severe Acute Respiratory Syndrome (SARS) (50 mins) 102 Pandemic Awareness (35 mins) 331 Heat Stress (40 mins) 333 Basics of Electrical Safety (35 mins) 334 Electrical Installations: Lockout/Tagout (20 mins) 335 Electrical Installations: Energized Parts (30 mins) 336 Electrical Safety: Flexible Cord Equipment (25 mins) 337 Electrical Installations: Training and PPE (35 mins) 353 Field Hazard Recognition (30 mins) 354 Forklift Operation and Safety (50 mins) 355 Medical Surveillance, Screening, and Records (30 mins) 356 Office Hazard Recognition and Response (75 mins) 801 Back Safety (40 mins) 802 Ergonomics (50 mins) 803 Wastewater Treatment: Activated Sludge (45 mins) 804 DOT Hazardous Materials: Hazardous Materials Table (40 mins) 805 DOT Hazardous Materials: Shipping Papers (30 mins) 806 DOT Hazardous Materials: Marking (45 mins) 807 DOT Hazardous Materials: Labeling (35 mins) 808 DOT Hazardous Materials: Placarding (40 mins) 809 Hot Work Permits (30 mins) 810 DOT Hazardous Materials: Transportation Security (45 mins) 811 Confined Space Entry (55 mins) 813 Hearing Conservation (45 mins) Tennessee Gas Association & OverNite Software, Inc. Online Training 814 Fire Extinguisher Basics (30 mins) 815 Process Safety Management (50 mins) 819 Personal Protective Equipment (35 mins) 820 Lockout/Tagout (40 mins) 821 Respiratory Protection (30 mins) 822 Hazard Communication (30 mins) 8220 Hazard Communication - Part 1 (40 mins) 8221 Hazard Communication - Part 2 (30 mins) 823 Accident Investigation Overview (30 mins) 826 Hazards of Benzene (30 mins) 827 Bloodborne Pathogens (35 mins) 828 Hazards of Lead (35 mins) 829 Hazards of Hydrogen Sulfide (30 mins) 830 Scaffold Safety (50 mins) 831 Fall Protection Systems (50 mins) 832 Fall Hazard Awareness (40 mins) 833 Ladder Safety (30 mins) 834 Excavation Safety (55 mins) 835 Hazards of Butadiene (35 mins) 836 RCRA: Handling and Shipping Hazardous Waste (30 mins) 837 RCRA: Regulations for Hazardous Waste Generators (35 mins) 838 Hazards of Hydrofluoric Acid (35 mins) 839 Hydrofluoric Acid Procedures and Controls (40 mins) 840 Asbestos Awareness (40 mins) 841 Ionizing Radiation (60 mins) 842 Hazmat Emergency Response (40 mins) 843 NORM in the Oil and Gas Industry (35 mins) Human Resources These courses address employee performance issues as well as regulations affecting employment practices. 196 Americans With Disabilities Act (ADA) (25 mins) 197 Fair Labor Standards Act (FLSA) (30 mins) 198 Family and Medical Leave Act (FMLA) (35 mins) 199 Etiquette (20 mins) 200 Telephone Etiquette (20 mins) 201 Sexual Harassment Awareness: Managers (25 mins) 202 Sexual Harassment Awareness: Employees (30 mins) 203 Preventing Workplace Violence (45 mins) 204 Diversity in the Workplace (30 mins) 205 Creating an Alcohol- and Drug-Free Workplace (70 mins) 206 Recognizing Substance Abuse in the Workplace (95 mins) 207 Anger Management: Dealing With Angry Coworkers (20 mins) 208 Anger Management: Managing Your Anger (25 mins) 209 Time Management: Effective Prioritization (30 mins) 210 Time Management: Efficient Organization (25 mins) 211 Coaching and Counseling (45 mins) 212 Effective Listening Skills (25 mins) 213 Safe Driving Skills (45 mins) 214 Civil Rights Act Title VII (20 mins) 215 Equal Pay Act (EPA) (20 mins) 216 Age Discrimination in Employment Act (ADEA) (20 mins) 217 Sarbanes-Oxley Act: Ethics Awareness (40 mins) 218 Sarbanes-Oxley Act: Overview for Managers (65 mins) 2014
3 DOT Operator Qualification These courses are designed to assist pipeline operators in meeting the requirements of the DOT Operator Qualification Rule. The DOT Operator Qualification Rule requires pipeline operators to develop and maintain a written qualification program for individuals performing covered tasks on pipeline facilities. The DOT also requires that pipeline operators qualify their workforce on covered tasks. The Operator Qualification Rule includes Subpart N 49 CFR Part 192 and Subpart G 49 CFR Part 195. *Includes Performance Checklist Operator qualification 001 Operator Qualification Summary (15 mins) 002 Introduction to the Natural Gas Industry (25 mins) 003 Guidelines for Proctoring Tests and Evaluations (10 mins) 004 Documenting a Field Evaluaton in eweboq (15 mins) *0361 Electric Valve Acutators (40 mins) *0981 Backfilling (20 mins) 100 Prevention of Accidental Ignition & Potential Ignition Sources (60 mins) *1010 Abnormal Operating Conditions: Recognize and React (40 mins) *1011 Abnormal Operations and Safety-Related Conditions (15 mins) 1012 Abnormal Operations (15 mins) 101 Recognize & React to Abnormal Operating Conditions & Safety Related Conditions (70 mins) 102 Emergency Plans & Public Contractor Education (100 mins) *103 Characteristics and Properties of Natural Gas (55 mins) *105 CGIs and Flame Ionization Units (60 mins) *106 OSHA/DOT Excavation Safety (60 mins) *107 Pipeline Pigging (90 mins) 108 Work Zone Safety (20 mins) *200 Leak Survey & Leak Classification (100 mins) *201 Population Density Change & Pipeline Patrol (75 mins) *205 Pipeline Crossings (65 mins) *206 Leak & Pipeline Failure Investigation (65 mins) *207 Investigating Pipeline Failure (15 mins) *244 Current Interrupters (20 mins) 300 Damage Prevention: Locating and Marking Pipeline (85 mins) *3000 Damage Prevention (35 mins) *3001 Locating and Marking Buried Pipelines (30 mins) *301 Vault Inspection and Confined Space Entry (75 mins) 305 Dehydration of Natural Gas (40 mins) 306 Dehydration with Triethylene Glycol (75 mins) *400 Valve Actuators (45 mins) 401 Valve Maintenance (105 mins) *4010 General Valve Maintenance (25 mins) *4011 Plug Valve Maintenance (20 mins) *4012 Ball Valve Maintenance (25 mins) *4013 Gate Valve Maintenance (20 mins) 402 Inspecting & Testing Relief Valves, Regulators, & Control Valves (80 mins) *4020 Inspecting and Testing Pressure Limiting Devices (25 mins) *4021 Inspecting and Testing Regulators (30 mins) *4022 Inspecting and Testing Control Valves (15 mins) 403 Pressure Testing Steel & Plastic Pipelines (125 mins) *4030 Pressure Testing Steel Pipelines Gas (40 mins) *4031 Pressure Testing Plastic Pipelines (35 mins) *407 Joining Steel Pipe Other Than by Welding (35 mins) 408 Maintaining and Repairing Pressure Limiting Devices (30 mins) 409 Pipeline Leak Repair (70 mins) *4090 Pipeline Repair: Grinding, Welding, and Sleeving (35 mins) *4091 Pipeline Repair: Composites (25 mins) 4095 Pipeline Repair: Sleeving Including Helical Pipe (40 mins) *411 Pipeline Purging With Air and Gas (40 mins) *4120 Hot Tapping (35 mins) *4121 Line Stopping (50 mins) 412 Hot Tapping and Stopping (105 mins) *414 Abandonment of Facilities (45 mins) *415 Installation of Anodes (25 mins) *416 Pipeline Shutdown and Startup Planning (45 mins) *501 Cathodic Protection Troubleshooting (50 mins) *502 Cathodic Protection Rectifier Inspections (35 mins) *503 Protective Coatings (45 mins) *504 Installation of Test Stations (25 mins) *505 Cathodic Protection Criteria (40 mins) *506 Electrical Insulator Inspections and Testing Casings (40 mins) *507 Internal Corrosion (45 mins) *508 Interference: AC and DC (45 mins) 509 Pipe-to-Soil Surveys (70 mins) *5090 Structure to Electrolyte Surveys (40 mins) *5091 Basic Corrosion (25 mins) *5093 Interval Surveys (35 mins) *510 Atmospheric Corrosion Pipeline Operations (30 mins) 5110 Rigging: Planning and Inspections (55 mins) 511 OSHA Rigging Inspection and Safety (105 mins) 5111 Safe Rigging Practices (35 mins) *600 Electric Arc Welding (95 mins) *601 Welder Qualification (130 mins) *602 Weld Repairs and Welding Procedures (60 mins) *604 Oxygen/Acetylene Welding & Cutting (90 mins) *606 NDT: Magnetic Particle Inspection (35 mins) *607 NDT: Liquid Dye Penetrant Inspection (35 mins) *608 Pipeline Integrity: High Consequence Area Field Surveys (30 mins) *609 Dresser Coupled Pipelines (25 mins) *610 Ultrasonic Thickness Testing (35 mins) 2
4 *Includes Performance Checklist Operator qualification (continued) 700 Compressor Station Operations & Safety (95 mins) 7000 Compressor Station Operations and Safety (40 mins) *7001 Compressor Stations: Design and Emergency Planning (45 mins) *701 Reciprocating Compressor Units (85 mins) *703 Compressor Operation: Turbine Units (95 mins) *704 Compressor Operation: Compressor Cylinders (60 mins) *705 Compressor Operation: Gas Path Integrity (70 mins) Distribution *706 Compressor Operation: Power Cylinder Balancing (45 mins) *800 Gas Control (60 mins) *900 Fundamentals of Electricity (95 mins) *901 Basic Electronics: PLCs (70 mins) *902 Basic Electronics: SCADA (105 mins) 1200 Underground Storage of Natural Gas and Liquids (95 mins) *1312 Aerial Patrol (30 mins) *202 Odorization: Concentration Testing (70 mins) *404 Plastic Pipe Fusion (100 mins) 404 Plastic Pipe Fusion Spanish Version (100 mins) *405 Electrofusion (70 mins) *406 Mechanical Fittings (65 mins) *413 Up-Rating Pipeline Systems (65 mins) *417 Installation of Plastic Mains and Services Part 1 (45 mins) *418 Installation of Plastic Mains and Services Part 2 (55 mins) *419 Natural Gas Operations and Maintenance Safety (70 mins) *420 Installation of Steel Mains and Services (65 mins) *421 Pipeline Tie-In Methods (35 mins) *500 Atmospheric Corrosion Distribution Operations (40 mins) *1221 Install Meters and Regulators - Residential (50 mins) *1231 Install Meters and Regulators - Commercial (60 mins) Liquid Pipeline LQ100 LQ: Subpart H Corrosion Control (30 mins) LQ201 LQ: Pipeline Patrol (50 mins) LQ202 LQ Pressure Testing Steel Pipelines (35 mins) LQ300 LQ: Marking Pipelines Temporary and Permanent (65 mins) LQ400 LQ: Below Ground Pipe Coatings & Exposed Pipe (85 mins) LQ415 LQ: Installation of Anodes (50 mins) LQ416 LQ: Conduct Annual Surveys (110 mins) LQ501 LQ: Cathodic Protection Troubleshooting (70 mins) LQ502 LQ: Rectifier Inspections (80 mins) LQ504 LQ: Installation of Test Stations (50 mins) LQ508 LQ: Interference (AC and DC) (60 mins) LQ707 LQ: Introduction to Compressor and Pump Operations (85 mins) LQ800 LQ: Pipeline System Control (65 mins) LQ901 LQ: Programmable Logic Controllers (125 mins) LQ902 LQ: Pressure Switches (50 mins) LQ903 LQ: Pressure Transmitters (60 mins) *LQ0271 LQ: LQ: Meter Maintenance and Proving (35 mins) *LQ0293 LQ: Flushing and Purging Pipeline Systems *LQ0401 LQ: Inspecting and Testing Control Valves (25 mins) LQ1012 LQ: Abnormal Operations (15 mins) LQ1100 LQ: Cathodic Protection Aboveground Storage Tanks (70 mins) LQ1102 LQ: Inspection - Aboveground Storage Tanks (60 mins) *LQ1641 LQ: Pigging: Launching and Receiving (55 mins) LQ2350 LQ: Aboveground Storage Tank Overfill Protection (70 mins) DOT Compliance 850 Public Awareness (35 mins) 851 DOT Drug Awareness (75 mins) 852 DOT Alcohol Awareness (60 mins) 853 Contractor Safety (20 mins) 854 Accident/Incident Investigation Overview (30 mins) 858 System Control: Fatigue Management for Supervisors (30 mins) 859 System Control: Fatigue Management for Controllers (30 mins) 860 System Control: Control Room Management Regulations (30 mins) 3
5 Emergency Response and Planning *102 Emergency Plans & Public/Contractor Education (100 mins) ER1300 Facility Response Plan for Hazardous Liquids Pipelines (25 mins) ER1301 Emergency Response Plan for Natural Gas Pipelines (25 mins) ER1302 Working With the Media During an Emergency (35 mins) ER1304 Pandemic Preparedness: What Every Employee Should Know (30 mins) ER1305 Pipeline Security Planning (50 mins) ER1306 Corporate Emergency Management Plan (20 mins) ER1308 SPCC Plans for Non-Production/Bulk Storage Facilities (35 mins) ER1309 SPCC Plans for Onshore Production Facilities (35 mins) Environmental 855 Introduction to Waste Management and Minimization (50 mins) 856 Air Permitting for Supervisors (25 mins) Instrument Use and Care 903 Using the DTEX Odorant Detection Instrument (30 mins) 904 Using the Heath ODORATOR (15 mins) 905 Using the Heath Gasurveyor (30 mins) 906 Using the T82 Single Gas Monitor (20 mins) Human Resources HR1000 Human Performance Systems (40 mins) HR1001 The Mentoring Process (65 mins) HR1002 Job Performance Evaluations (35 mins) HR1003 Effective Media Relations (35 mins) 8561 Air Permitting Awareness (20 mins) 857 Environmental Awareness (30 mins) 907 Using the Radiodetection Pipe Locator (75 mins) 908 Using the Metrotech Pipe Locator (60 mins) 909 Ditch Witch Pipe Locators (40 mins) 910 Using a Digital Multimeter (45 mins) HR1004 Incident Command System and Natural Gas Emergencies (35 mins) HR1005 Ethics and Compliance (50 mins) HR1006 Management of Change (35 mins) HR1007 Right-of-Way Agent Training: Landowner Communications (30 mins) 4
Business & Legal Reports (BLR) Training. Workplace Safety Online Courses. Accident Investigations. Aerial Lift Safety
Business & Legal Reports (BLR) Training Workplace Safety Online Courses COURSE TITLE Accident Investigations Aerial Lift Safety Americans with Disabilities Act - What Supervisors Need to Know Arc Flash
WORK PLACE SAFETY TRAINING
Click web link and follow directions: WORK PLACE SAFETY TRAINING https://safety.army.mil/training/distanclearningonlinetrainning/tabid/1210/de fault.aspx List of training classes: ATRRS: The Supervisor
J.J. Keller Safety Materials
J.J. Keller Safety Materials Using safety talks will allow your employees to analyze Real Life Stories and share what they feel the individuals did right and wrong, and what should happen next. Safety
TABLE OF CONTENTS 4. CONTRACTOR SHE MANAGEMENT PROGRAM R1400.00 --MANAGEMENT STATEMENT
4. CONTRACTOR SHE MANAGEMENT PROGRAM R1400.00 TABLE OF CONTENTS --MANAGEMENT STATEMENT ADMINISTRATIVE 1. SHE AND ACCIDENT PREVENTION 1-A Discipline 2. NEW HIRE ORIENTATION (Outline) 2-A New Hire Orientation
Online Training Course Library
Online Training Course Library FEATURED COURSES As the leader in online safety training solutions, ClickSafety practices Safety every single day. Our entire library of 300+ courses (with over 55 in Spanish)
ASMECourseCatalog. www.energyu.org www.midwestenergy.org
ASMECourseCatalog www.energyu.org www.midwestenergy.org ASME Abnormal Operating Conditions... 6 ASME GAS01 Hazards of Natural Gas and Prevention of Accidental Ignition... 6 ASME 0001 Measure Structure-to-Electrolyte
NCCER 13614 Progress Blvd., Alachua, FL 32615 Tel: (888) 622-3720 E-mail: [email protected]. Task Number Item Date(s) Recorded By
NCCER 13614 Progress Blvd., Alachua, FL 32615 Tel: (888) 622-3720 E-mail: [email protected] PIPELINE MAINTENANCE On-the-Job Training Level One MODULE 66101-02 INTRODUCTION TO THE PIPELINE INDUSTRY This is
Course Description List
Course Description List Arc Flash This course is used to raise awareness about the specific electrical hazards of an arc flash. This course will also introduce a new CSA Standard on workplace electrical
DVD PROD# PROGRAM TITLE LANGUAGES 0006006 ACCIDENT INVESTIGATION DETER ROOT CAUSE
0006006 ACCIDENT INVESTIGATION DETER ROOT CAUSE 0006464 Accident Investigation: Examining the Details English/Spanish 0006271 AERIAL LIFT SAFETY ENGLISH/SPANISH 0006178 AIR EMISSIONS 0006390 AMMONIA SAFETY
PITTSBURG TANK AND TOWER CO., INC.
PITTSBURG TANK AND TOWER CO., INC. HEALTH, SAFETY & ENVIROMENTAL PROGRAM INDEX 1.SAFETY POLICY & MANAGEMENT RESPONSIBILITIES - Safety Policy - Administrative Duties * Top Management * Safety Director *
SMALL GAS OPERATOR OPERATION AND MAINTENANCE PLAN
SMALL GAS OPERATOR OPERATION AND MAINTENANCE PLAN Facility Name: Address: QUALIFIED PERSONNEL All tasks shall be completed by a person that is qualified to that task (see operators qualification of individuals
THE DELTON GROUP MANPOWER TRAINING CONSULTANCY SHORT COURSE PROGRAMME TOPICS LISTING
THE DELTON GROUP MANPOWER TRAINING CONSULTANCY SHORT COURSE PROGRAMME TOPICS LISTING Delton Short Course Programmes English Language Technical English Language English Language for the Oil Industry Oil
UGI New Field Employee On-Boarding & Orientation. 2015 EAP T&D Seminar May 28 th, 2015
UGI New Field Employee On-Boarding & Orientation 2015 EAP T&D Seminar May 28 th, 2015 UGI Introduction Acquisitions in 2006 and 2008 Approximately 62,000 electric customers Over 620,000 gas customers Gas
SOCALGAS APROACH TO PIPELINE INTEGRITY
SUMMER 2011 SOCALGAS APROACH TO PIPELINE INTEGRITY Southern California Gas Company (SoCalGas ) is committed to providing clean, safe and reliable natural gas to its customers and takes important steps
Table of Contents Introduction How to Use This Manual How to Do a Facility Audit
Table of Contents Introduction How to Use This Manual How to Do a Facility Audit OSHA Plant Safety Audit Checklist: Self-Inspection Types of Hazards Addressing the Hazards in Your Work Area Safety and
J. J. KELLER S 5-MINUTE WORKPLACE SAFETY TALKS
Acrylonitrile Air Contaminants How Much Is Too Much? Air Contaminants Standard Alcohol- and Drug-Free Workplace Anhydrous Ammonia Refrigeration Units Asbestos Automated External Defibrillators (AEDs) Behavior-Based
Safety Training Needs Assessment
Safety Needs Assessment Form Instructions: Please review each question and either check YES or NO. If a question is checked YES you will be required to complete the training topic before initial assignment
FEDERAL GOVERNMENT OVERSIGHT OF PIPELINE SAFETY
Operational Safety INTRODUCTION The Millennium Pipeline Company (Millennium) is proud of the key role it plays in New York s energy infrastructure. The Millennium Pipeline is a vital link in a system that
INDIAN STANDARDS FOR NATURAL GAS PIPELINE SYSTEM
INDIAN STANDARDS FOR NATURAL GAS PIPELINE SYSTEM 1. IS 15663(Part 1):2006 This code covers requirements and recommendations for the design, materials, construction and testing of pipelines made of steel
elearning Course Catalog Human Resources
ADA- What Supervisors Need to Know This online employment course will help supervisors identify the purpose of the ADA, define "disability" correctly, make reasonable accommodations, handle job interviews
ENVIRONMENTAL, HEALTH & SAFETY TRAINING PROGRAM DESCRIPTION TABLE OF CONTENTS PURPOSE...2 SCOPE...2 RESPONSIBILITIES...2 PRECAUTIONS / LIMITATIONS...
REVISION 2 PAGE 1 OF 11 Section TABLE OF CONTENTS Page PURPOSE...2 SCOPE...2 RESPONSIBILITIES...2 PRECAUTIONS / LIMITATIONS...3 PREREQUISITES / INITIAL CONDITIONS...3 PROCEDURE...3 Eligibility Requirements...3
ENVIRONMENTAL COMPLIANCE PROGRAM
Chapter 4. Handling and Disposal of Hazardous Waste 4.1 Hazardous waste: Hazardous waste is defined in section IV under definitions. The following diagram can aide in the process of determination: Is the
CATHODIC PROTECTION SYSTEM DESIGN
CATHODIC PROTECTION SYSTEM DESIGN Presented By DENIS L ROSSI P.E. CORROSION ENGINEER New England C P Inc. Corrosion Fundamentals What is corrosion? It is defined as the degradation or deterioration of
Construction Safety. OSHA Compliance. General Safety. DOT Compliance. Human Resources
The United Safety Council is pleased to provide this members only benefit to grant members access to online safety videos covering all OSHA Compliance and General Safety Topics. The different topics are
Construction Trades Safety Training and Practices. Presented By: James B. Asbury, MS, MBA, CSP, CIH
Construction Trades Safety Training and Practices Presented By: James B. Asbury, MS, MBA, CSP, CIH Agenda Parkersburg-Marietta Contractors and Trades Education and Development Fund Educational and Development
Operations and Maintenance Procedures for Natural Gas Systems
Operations and Maintenance Procedures for Natural Gas Systems Contact Information John West Transportation Specialist U.S. Department of Transportation PHMSA Office of Training and Qualifications Office
STORE HAZARDOUS SUBSTANCES SAFELY. incompatibles gas cylinders
STORE HAZARDOUS SUBSTANCES SAFELY Suitable containers incompatibles gas cylinders Oxy-Acetylene welding flammable substances 35 36 STORE HAZARDOUS SUBSTANCES SAFELY STORE HAZARDOUS SUBSTANCES SAFELY Storing
SUB-CONTRACTOR/VENDOR PRE-QUALIFICATION QUESTIONNAIRE
Page 1 of 7 SUB-CONTRACTOR/VENDOR PRE-QUALIFICATION QUESTIONNAIRE GENERAL INFORMATION 1. Company Name/Contractors License No.: Telephone: SIC(s): Street Address: Mailing Address: 2. Officers: Years With
Company Name: City, State, Zip Code: Annual Report Summary
Company Information 2014 Company Name: Contact: Title: Address: City, State, Zip Code: Telephone: Fax: E-mail: Transmission Sector Summary BMP 1: Directed inspection and maintenance at compressor stations
Underground Storage Tanks
Underground Storage Tanks An Informational and Guidance Document for the University Community. Please contact Yale Environmental Health and Safety for latest Regulatory Requirements. A typical UST installation
HSE Requirements for Contractors
PROJECT DEFINITION AND CONTACTS Project Title: Kodak is obligated to identify any known and potential Health, Safety, and Environmental (HSE) hazards to individuals who might be affected by them. This
Get your OSHA and EHS training from an authorized OSHA Education Center. 2016 OSHA & EHS Courses
Get your OSHA and EHS training from an authorized OSHA Education Center. 2016 OSHA & EHS Courses Table of Contents OSHA 500 - Trainer Course in OSHA Standards for Construction...2 OSHA 501 - Trainer Course
WELDING & CUTTING. Course Description:
WELDING & CUTTING This course attempts to discuss the two most common types of welding and cutting (gas and arc), the danger that are involved in working with them and the safety measure that can be undertaken
Business & Legal Reports (BLR) Training. Human Resources Online Courses. Affordable Care Act - What You Need to Know
Business & Legal Reports (BLR) Training Human Resources Online Courses COURSE TITLE Affordable Care Act - What You Need to Know Americans with Disabilities Act - What Supervisors Need to Know Attendance
TECHNICAL INFORMATION
Page: 1/6 This checklist recognizes the major accident hazards found by experience of previous HAZID studies. It is not intended to be totally exhaustive and feedback from users should be incorporated
Required Courses. Total Hours 39
Public Sector Safety & Health Fundamentals Certificate Program for General Industry Participants must complete a minimum of seven courses, comprised of required and elective courses, that include a minimum
SAFETY TRAINING CLASSES & SERVICES LIST
SAFETY TRAINING CLASSES & SERVICES LIST CUSTOM CLASS ROOM TRAINING AVAILABLE, BACKED WITH ON-SITE SUPPORT SAFETY, TRAINING COURSES OFFERED BY OUR CERTIFIED ELITE RISK CONTROL TEAM: EM 385-1-1 (Military)
Enviro Safety Products Resource Center. OSHA Checklist for General Industry
Enviro Safety Products Resource Center OSHA Checklist for General Industry The Occupational Safety and Health Administration (OSHA) require many standards to be met by businesses and industries. OSHA sets
SNAP-ON INCORPORATED STANDARD ON EMPLOYEE TRAINING PROGRAM
SNAP-ON INCORPORATED STANDARD ON EMPLOYEE TRAINING PROGRAM Issued By:.DOC Approval: Page 1 of 9 1.0 SCOPE It is Snap-on Incorporated's policy to have in place a management system that drives all operating
XYZ Contract Company Industrial Hygiene Program
[This is an example of a general Industrial Hygiene program intended to help Industrial Hygienists in the development of a specific contractor IH program if one is not yet developed. It is not intended
Training Needs Assessments Chart. Index of Training Requirements Job Description: or Employee:
1910.1200 Hazard Communication HAZCOM 1910.147 The Control of Hazardous Energy, Lock-out/Tag-Out 1910.212 Machines, General Requirements 1910.305 Electrical, Wiring Methods, Components & Equip. 1910.132
JUBILEE TECHNICAL TRAINING CENTRE TAKORADI POLYTECHNIC 2015 TRAINING PROGRAMMES
JUBILEE TECHNICAL TRAINING CENTRE TAKORADI POLYTECHNIC 2015 TRAINING PROGRAMMES Main Courses Duration: 26 weeks 1. NVQ Level 2 Performing Process Operation in Replicating Environment 2. NVQ Level 2 Performing
OSHA Training Institute Education Centers Course Descriptions
U.S. DEPARTMENT OF LABOR Occupational Safety and Health Administration (OSHA) OSHA Training Institute Education Centers Course Descriptions www.oshamidatlantic.org 800-875-4770 U. S. D E P A R T M E N
PIPELINE FUNDAMENTALS. texaspipelines.com
PIPELINE FUNDAMENTALS texaspipelines.com Texas Oil & Gas: Generating $2.6 Billion for State Revenues texaspipelines.com Texas Oil & Gas Texas produces 20% of US Domestic Oil Production 1.1 Million Barrels
List of Frequently Utilized Storage Tank Standards and Practices
List of Frequently Utilized Storage Tank Standards and Practices Below is a list of frequently used storage tank standards and practices from organizations that are referenced in 25 PA Code, Chapter 245.
OPERATIONS & MAINTENANCE (O&M) FOR PROPANE STORAGE FACILITIES
OPERATIONS & MAINTENANCE (O&M) FOR PROPANE STORAGE FACILITIES Reference: National Fire Protection Association (NFPA) Pamphlet No. 58 Liquefied Petroleum Gas Code, 2001, Chapter 11 Type of Facility: Petroleum
Title: Aircraft Parking
Environmental Standard Operating Procedure Originating Office: Revision: Prepared By: Approved By: MCAS Miramar Environmental Original Environmental Management Department William Moog Management Department
NW Natural & Pipeline Safety
NW Natural & Pipeline Safety We Grew Up Here NW Natural is an Oregon-based utility company founded in 1859. The company purchases natural gas for its core market in western Oregon and southwestern Washington,
TEMPORARY EMPLOYEES SAFETY PROCEDURES
TEMPORARY EMPLOYEES SAFETY PROCEDURES Temporary Agencies will ensure that any temporary employee sent to work at Modern will have received and understand the General Safety Rules. GENERAL SAFETY RULES
CAL/VPP EVALUATION Check list Revised 02/18/15. EMPLOYER: Contact:
CAL/VPP EVALUATION Check list Revised 02/18/15 EMPLOYER: Contact: Description of Site and Nature of Work: Include: Age & Area of the building(s), Area of site, Nature of work & a brief description of Process,
Section A SPCC Plan Implementation Checklist This section of the report addresses compliance with certain requirements of Federal Regulations 40 CFR 112. I. STATUS OF SPCC PLAN (40 CFR 112.3) YES NO A.
On-Site Risk Management Audit Checklist for Program Level 3 Process
On-Site Risk Management Audit Checklist for Program Level 3 Process Auditor name: Date: I. Facility Information: Facility name: Facility location: County: Contact name: RMP Facility I.D. Phone Number:
Hobart and William Smith Colleges. Environmental, Health and Safety Program
Hobart and William Smith Colleges Geneva, New York Environmental, Health and Safety Program Copies of the EHS Program: 1. Human Resources Office 2. Office of the President (Provost) 3. Campus Safety Office
ALVERNIA UNIVERSITY OSHA REGULATION: 29 CFR 1910.252 WELDING, CUTTING, AND BRAZING ( HOT WORK ) SECTION: 3600
OSHA REGULATION: 9 CFR 90.5 WELDING, CUTTING, AND BRAZING ( HOT WORK ) A. POLICY. This procedure follows requirements set forth in 9 CFR 90.5.. This policy applies to all Hot Work operations being done
Natural Gas Safety. What You Need to Know
Natural Gas Safety What You Need to Know Knowledge is Safety Approximately 52% of all U.S. households use natural gas for Home heating Cooking Water heaters Gas logs Outdoor gas grills Our Local History
PROCEDURES PREVENTION OF ACCIDENTAL IGNITION
Page No: 1 of 7 6.0 PURPOSE (192.751) All possible precautions shall be exercised to prevent the accidental escape and ignition of gas. Whenever possible, potential sources of ignition should be eliminated
Compliance Inspections of Natural Gas Systems
Compliance Inspections of Natural Gas Systems Safety Regulations Applicable to Natural Gas Systems Who are these people and why are they calling me? Where do they get their authority? USC Section 60117
PIPELINE EMERGENCIES. Chapter 2 Pipeline Regulations and Safety Programs. Michael Callan
PIPELINE EMERGENCIES Pipeline Regulations and Safety Programs Michael Callan Pipeline Regulations And Safety Programs Objectives a) Describe The Basic Types And Categories Of Pipeline Systems, Including:
Contractor Safety Management
1.0 Introduction Memorial University will ensure that a diligent contractor management process is established. This procedure establishes requirements for contract administration and oversight of contractor
Petroleum Tanks at Municipal Facilities
January/February 2013 Petroleum Tanks at Municipal Facilities This document was reprinted with permission from the New York Association of Towns Talk of the Towns/Topics magazine January/February 2013
OCCUPATIONAL SAFETY & HEALTH ADMINISTRATION OSHA COURSE DESCRIPTIONS
OCCUPATIONAL SAFETY & HEALTH ADMINISTRATION OSHA COURSE DESCRIPTIONS WWW.osha.gov/dte/edcenters/course_description.html Course Descriptions OSHA #500 - Trainer Course in OSHA Standards for Construction
49 CFR 192 Transportation of Natural and Other Gas By Pipeline: Minimum Federal Safety Standards
49 CFR 192 Transportation of Natural and Other Gas By Pipeline: Minimum Federal Safety Standards THIS DOCUMENT CONTAINS ONLY THE SECTIONS NEEDED FOR THE API 1169 ICP EXAMS Subpart G General Construction
Abnormal Operating Conditions Emergency Plans and Public Awareness Plans for Natural Gas Systems
Abnormal Operating Conditions Emergency Plans and Public Awareness Plans for Natural Gas Systems Contact Information John West Transportation Specialist U.S. Department of Transportation PHMSA Office of
BODY OF KNOWLEDGE API-653 ABOVEGROUND STORAGE TANK INSPECTOR CERTIFICATION EXAMINATION November 2015, March 2016 and July 2016 (Replaces October 2013)
BODY OF KNOWLEDGE API-653 ABOVEGROUND STORAGE TANK INSPECTOR CERTIFICATION EXAMINATION November 2015, March 2016 and July 2016 (Replaces October 2013) API Authorized Aboveground Storage Tank Inspectors
WHS Induction Series. 36 Toolbox Talks. Contents
36 Toolbox Talks 3-5 minute toolbox talks for induction or refresher safety training. Having regular training programs that educate your workers about workplace issues has never been easier than now with
Alaska. Occupational Safety and Health Standards. quick guide to. hazard communication for general industry. What you should know and not a word more!
Alaska Occupational Safety and Health Standards quick guide to hazard communication for general industry What you should know and not a word more! Table of Contents Overview of AKOSH Services 1 What is
Installation Instructions for Alarm Module Kit A043F059
Instruction Sheet 07-2013 Installation Instructions for Alarm Module Kit A043F059 1 Introduction The information contained within is based on information available at the time of going to print. In line
Gibson Door & Millwork, Inc.
Gibson Door & Millwork, Inc. Gold Award This is to certify that Gibson Door & Millwork, Inc. has successfully completed the ConstructSecure independent Construction Safety Assessment Program (CSAP).Gibson
810. Health and Safety Policy
Adopted: May 14, 2012 Model Policy 810 Revised: June 22, 2015 Orig. 2012. 810. Health and Safety Policy I. PURPOSE The Windom School District strives to provide a safe, healthy work and educational environment
OSHA SAFETY TRAINING TABLE for more information see www.osha.gov
OSHA SAFETY TRAINING TABLE for more information see www.osha.gov CATEGORY DESCRIPTION WHO RECEIVES HOW OFTEN AWAIR Requires employers to set up a written accident & injury reduction program based on clearly
Subcontractor Pre-Qualification
Subcontractor Pre-Qualification Thank you for your inquiry regarding subcontracting opportunities with Western Utility LLC. (WU). Construction projects bring many exciting challenges and risks associated
Risk Management Department Safety & Worker s Compensation Training Classes
Risk Management Department Safety & Worker s Compensation Training Classes The following safety and worker s compensation training is available from Risk Management and is scheduled by contacting the Risk
NATIONAL ENERGY BOARD PIPELINE PERFORMANCE MEASURES 2013 DATA REPORT
NATIONAL ENERGY BOARD PIPELINE PERFORMANCE MEASURES 2013 DATA REPORT October 2014 Amended July 2015 Permission to Reproduce Materials may be reproduced for personal, educational and/or non-profit activities,
OSHA Construction, General Industry and HAZWOPER Catalog
OSHA Construction, General Industry and HAZWOPER Catalog OSHA Construction Industry 900-01 OSHA 10 Hour Construction Industry Outreach Training OSHA 10 Hour Construction Outreach Training Course. The 10-hour
RESPIRATORY PROTECTION PROGRAM
RESPIRATORY PROTECTION PROGRAM OFFICE of ENVIRONMENTAL HEALTH & SAFETY Campus Location: Physical Plant 521 S. Razorback Road Telephone: 479 575 5448 Web site: http://www.phpl.uark.edu Applies to all UofA
COMPETENCY ANALYSIS PROFILE Refrigeration and Air Conditioning Systems Mechanic - Branch 1 313A
COMPETENCY ANALYSIS PROFILE Refrigeration and Air Conditioning Systems Mechanic - Branch 1 313A (All unshaded skill sets must be demonstrated/completed) PROTECT SELF AND OTHERS Identify, interpret, and
ENVIRONMENTAL HEALTH & SAFETY/RISK MANAGEMENT Contractor Management (including Sub-Contractors)
ENVIRONMENTAL HEALTH & SAFETY/RISK MANAGEMENT Contractor Management (including Sub-Contractors) Contractors have the responsibility to ensure the health and safety of their workers and that their work
Process Safety Management of Highly Hazardous & Explosive Chemicals. Safe Work Practices
Process Safety Management of Highly Hazardous & Explosive Chemicals Safe Work Practices Safe Work Practices 1910.119(f)(1) The employer shall develop and implement safe work practices to provide for the
FACILITY FIRE PREVENTION AND EMERGENCY PREPAREDNESS INSPECTION CHECKLIST
FACILITY FIRE PREVENTION AND EMERGENCY PREPAREDNESS INSPECTION CHECKLIST Date of Inspection: Conducted by: Location: Reviewed by: Date of Review: Comments or additional corrective action taken as a result
Special Specification 7021 Water Main and Sewer Line Replacements
Special Specification 7021 Water Main and Sewer Line Replacements 1. DESCRIPTION Furnish, install, or replace water pipe, water valves, water meters and boxes, water service connections, fire hydrant assemblies,
Occupational Safety and Health Division Training Course Catalog
Occupational Safety and Health Division Training Course Catalog Improving the safety & health culture through education, training and outreach N.C. Department of Labor Occupational Safety and Health Division
APPENDIX J GAS DISTRIBUTION
APPENDIX J GAS DISTRIBUTION Ji Jii APPENDIX J GAS DISTRIBUTION NEIL G. THOMPSON, PH.D. 1 SUMMARY The natural gas distribution system includes 2,785,000 km (1,730,000 mi) of relatively small-diameter, low-pressure
CHAPTER X GAS LEAKAGE CONTROL GUIDELINES FOR PETROLEUM GAS SYSTEMS
CHAPTER X GAS LEAKAGE CONTROL GUIDELINES FOR PETROLEUM GAS SYSTEMS SCOPE These guidelines provide criteria for the detection, grading and control of gas leakage and for related records for systems handling
INTRODUCTION ARC FLASH PROTECTION AND SAFETY MEASURES. September 2010
ARC FLASH PROTECTION AND SAFETY MEASURES September 2010 Introduction Hazards of Electrical Energy Electrical Safety Program Safety-Related Work Practices Electrical Safety Procedures Presented By: Ken
2012 OPEN ENROLLMENT SCHEDULE Environmental, Health & Safety Training State & Federal EPA Accredited Programs
2012 OPEN ENROLLMENT SCHEDULE Environmental, Health & Safety Training State & Federal EPA Accredited Programs ASBESTOS Abatement Worker/Supervisor Air Sampling Technician (NYS) Allied Trades (NYS) NIOSH
Safe Operating Procedure
Safe Operating Procedure (Revised 07/09) HOT WORK PERMIT OPERATIONS (For assistance, please contact EHS at (402) 472-4925, or visit our web site at http://ehs.unl.edu/) Authority In recognition of the