Process Safety Management of Highly Hazardous & Explosive Chemicals. Safe Work Practices
|
|
|
- Opal Alexandra Elliott
- 7 years ago
- Views:
Transcription
1 Process Safety Management of Highly Hazardous & Explosive Chemicals Safe Work Practices
2 Safe Work Practices (f)(1) The employer shall develop and implement safe work practices to provide for the control of hazards during operations such as lockout/tagout; confined space entry; opening process equipment or piping; and control over entrance into a facility by maintenance, contractor, laboratory, or other support personnel. These safe work practices shall apply to employees and contractor employees.
3 Safe Work Practices Are They Really Important Video
4 Develop and implement safe work practices* to provide for the control of hazards during operations such as: Lockout/tagout; Confined space entry; Line Opening process equipment or piping; and Control over entrance into a facility by maintenance, contractor, laboratory, or other support personnel *These safe work practices apply to contractor employees as well
5 Safe Work Practices, Programs & Procedures must: Be specific to the Covered Process Follow Procedures & Recommendations in the PHA s Follow Procedures in the Operating Procedures Must be Able to be Tracked Follow Form
6 Control Over Entrance into the Facility First, How do We Control Who Enters the Covered Process? What Type of Security Controls are in Place What Training is Required Before Entry?
7
8 Remember Safe Work Practices Control Over Entrance into the Facility and control over entrance into a facility by maintenance, contractor, laboratory, or other support personnel
9 Control Over Entrance into the Facility NASA Security Gate & Why
10 General Hazardous Materials & Many Times, when covered process hazards include flammable liquids or gases, the control of ignition sources becomes critical. This may require testing of the atmosphere before any device not deemed intrinsically safe are introduced into the covered process area Fire Prevention
11 General Hazardous Materials & Fire Prevention
12 General Hazardous Materials & Fire Prevention Simple Safety Procedures that Become Critical Near a Covered Process Such as Cylinder Storage
13 General Hazardous Materials & Fire Prevention Ensuring the Correct Gas is Marked & Secured
14 General Hazardous Materials & Fire Prevention And A Procedure for Marking Historical Areas of Minor Gas Leaks
15 The Control of Hazardous Energy - Lockout Tagout Lockout Tagout - One of the Most Important Procedures in PSM Must be Written Carefully & Follow all Procedures (PHA s, Operating Procedures) Must be Followed to the Letter!
16
17 The Control of Hazardous Energy - Lockout Tagout Lockout/Tagout in PSM Why not Use Digital Imaging in Your Procedures to Identify Critical Lockout /Tagout Positions
18 Permit Confined Space Entry Program The Mirror Standard to Lockout Tagout No Mistakes Allowed Here Must be Specific to the Covered Process
19 Permit Confined Space Entry Program A Confined Space is Defined as A Space That : Has limited or restricted means of entry or exit Is large enough for an employee to enter and perform assigned work, and Is not designed for continuous occupancy by the employee.
20 Permit Confined Space Entry Program A Permitted Confined Space is A Confined Space with a Serious Hazard of Any Kind Or a Space That a Serious Hazard of Any Kind is Introduced into the Space Welding in a Confined Space
21 Program Element Summary: Safe Work Practices Permit Confined Space Entry Program Written Program Worksite Hazard Evaluation Marking of Permit Spaces Space Specific Entry Procedures Entry Permit Procedure Training Demonstration of Competency Rescue Procedures Periodic Inspections
22 Line Opening or Breaking Procedures A Hazard Review Must Completed for All Line/Equipment Hazards Including: HAZARDOUS MATERIALS IN SYSTEM POTENTIAL PHYSICAL HAZARDS BARRICADING AS REQUIRED FIRST AID IF EXPOSED LOCATION OF SAFETY EQUIPMENT PPE REQUIRED FOR LINE OPENING
23 Line Opening or Breaking Procedures Special PPE may Required Example - NASA Hydrogen Gas & Nitrogen High Pressure Gas Plant Cryogenic Gas Requires Special PPE
24 Line Opening or Breaking Procedures Cryogenic Protective Footwear Hardhat Face shield Safety Glasses Protective Clothing Special Gloves NASA High Pressure Gas-Nitrogen
25 Line Opening or Breaking Procedures LOP Program May Take the Form of Many Types A Combination of Written Procedures and Graphic Illustrations Work Well Let s review an example
26
27
28
29 Line Opening Permits Identify Procedures for Opening any Process Line in a Covered Process Must Include Hazards of the Line Opening PPE Required
30 Hot Work Program
31 Hot Work Program Hot Work is any work involving burning, welding, or similar operations that are capable of initiating fires or explosions. This program shall cover the following hot work processes: Welding and Allied Processes Heat Treating Grinding Thawing Pipe Powder-Driven Fasteners Hot Riveting Any Other Spark, Flame or Heat
32 Management Responsibilities Safe Work Practices Hot Work Program providing employees with adequate training including the inherent risks involved, the emergency procedures in the event of a fire, instructions on all equipment and processes, as well as the provisions of this program recognizing responsibility for the safe usage of cutting and welding equipment on Covered Process Equipment and ensuring only approved equipment is used
33 Remember Hot Work Program Could be Used to Control the Introduction of Non-Intrinsically Safe Devices into a Covered Process Hot Work Program
34 Controlling all Other Ignitions Sources is also Difficult Such As: Electrical Static Electricity Lightning Truck/Cars Hot Work Program
35 - Hot Work A Program Must be Developed for the Covered Process That Requires: A Hot Work Permit be Issued for ALL Hot Work Performed in the Plant by Employees or Contractors A Permit must be Posted at the Location of the Hot Work A Fire Watch Is Required A Fire Extinguisher or Other Appropriate Fire Fighting Equipment Must Be Present, Fire Watch must be Trained in its use
36 Paper Mill Explosion & Fire Caused by Failure to Follow Hot Work Procedures
37 Must be Specific for the Covered Process May Require Additional Program other than Lockout Tagout, Line Opening & Hot Work such as Confined Space, Electrical Safe Work Practices, Combustible Dust
38 NASA High Pressure Gas Plant Operating Procedures & Safe Work Practices Case Study Team Exercise
39 Nitrogen & Helium Plant
40
41
42
43
44
45
46
47 Team Exercise Team Exercise With the Information to Follow in The NASA Case Study Video, Presentation & Notebook, With Your Team Members, Perform the Following Exercises & Answer the Following Questions:
48 Case Study Exploration Case Study Exploration 1. List the Hazards Present in the NASA High Pressure Gas Plant that Handles Liquid Nitrogen, Helium, Liquid Hydrogen & Gaseous Hydrogen. 2. What are Potential Ignition Sources to Control at the Hydrogen Gas Plant? 3. What are the hazards of Cryogenic Gas? 4. What PPE is required to work around Cryogenic Gas? 5. Why can t you use your cell phone near the gas plant? 6. Why are Vehicles Kept at least 100 ft. away from the Hydrogen Gas Plant? 7. List the Safe Work Practices Required in the PSM Standard? 8. With the information learned, write a simple one page hot work program for the Hydrogen Gas Plant. We will Discuss the Findings of Each Team in Class
49 What s Next What s Next Now That We ve Developed Operating Procedures & Safe Work Practices We Have to Train We Have to Train
Safe Operating Procedure
Safe Operating Procedure (Revised 07/09) HOT WORK PERMIT OPERATIONS (For assistance, please contact EHS at (402) 472-4925, or visit our web site at http://ehs.unl.edu/) Authority In recognition of the
ALVERNIA UNIVERSITY OSHA REGULATION: 29 CFR 1910.252 WELDING, CUTTING, AND BRAZING ( HOT WORK ) SECTION: 3600
OSHA REGULATION: 9 CFR 90.5 WELDING, CUTTING, AND BRAZING ( HOT WORK ) A. POLICY. This procedure follows requirements set forth in 9 CFR 90.5.. This policy applies to all Hot Work operations being done
HOT WORK PERMIT PROCEDURES
COLUMBIA UNIVERSITY ENVIRONMENTAL HEALTH & SAFETY HOT WORK PERMIT PROCEDURES COLUMBIA UNIVERSITY MEDICAL CENTER February 2010 1 TABLE OF CONTENTS A. PURPOSE 3 B. SCOPE 3 C. POLICIES AND PROCEDURES 3-4
HOT WORK PERMIT PROGRAM TRAINING. John Braun
HOT WORK PERMIT PROGRAM TRAINING John Braun 1.0 INTRODUCTION 1.2 Purpose The Hot Work Permit Program has been developed for University employees that work on or around hot work activities. This program
1.0 Purpose... 4. 2.0 Definitions...4. 3.0 Hot Work Operations. 5
HOT WORK PROGRAM Introduction The University of Kentucky recognizes a potential for fire from hot work operations. For that reason this program should be implemented in all departments at the University
WORKING IN CONFINED SPACES GUIDELINES
WORKING IN CONFINED SPACES GUIDELINES Contents 1 Introduction... 2 2 Scope... 2 3 Definitions... 2 4 Responsibilities... 3 4.1 Permit Authoriser... 3 4.2 Permit Receiver... 3 4.3 Responsible UOW Officer...
Work Permits. A Health and Safety Guideline for Your Workplace. When is a Work Permit Needed? What is a Work Permit? Why use a Work Permit?
A Health and Safety Guideline for Your Workplace What is a Work Permit? A work permit is a written form used to authorize jobs that expose workers to serious hazards. It identifies the work to be done,
Process Safety Management of Highly Hazardous & Explosive Chemicals. Application, Exclusions & Definitions
Process Safety Management of Highly Hazardous & Explosive Chemicals Application, Exclusions & Definitions Application 1910.119(a)(i) A process which involves a chemical at or above the specified threshold
WEEKLY SAFETY MEETING All Euramax Subsidiaries WELDING SAFETY / HOT WORK SAFETY. Safety Meeting Contents. Meeting Notice.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
Presented by: Rich Perry Marsh Risk Consulting
Flammable and Combustible Liquids Presented by: Rich Perry Marsh Risk Consulting What s the Big Deal? Flammable and combustible liquids are easily ignited Ignite with explosive force Burn readily and give
HealthandSafetyOntario.ca. What is a work permit? Why use a work permit? Types of work permits. When is a work permit needed?
work permits What is a work permit? A work permit is a written form used to authorize jobs that expose workers to serious hazards. It identifies the work to be done, the hazards involved, and the necessary
STORE HAZARDOUS SUBSTANCES SAFELY. incompatibles gas cylinders
STORE HAZARDOUS SUBSTANCES SAFELY Suitable containers incompatibles gas cylinders Oxy-Acetylene welding flammable substances 35 36 STORE HAZARDOUS SUBSTANCES SAFELY STORE HAZARDOUS SUBSTANCES SAFELY Storing
SITE CONTRACTOR PROCEDURES
SITE CONTRACTOR PROCEDURES Asset Collection Type B Assets are considered High risk ; the site activities must be in accordance with Graysonline contractor procedures and are to be collected by appointment
Welding, Brazing & Cutting Guidelines
FIRENET FIRE PREVENTION DEPARTMENT November 2010 Welding, Brazing & Cutting Guidelines Hot Work is any work activity that generates a flame, heat or sparks such as soldering, brazing, welding, torch cutting
Confined Space Procedures
Confined Space Procedures Table of Contents Purpose... 2 Primary Objectives... 2 Operational Objectives... 2 Legislation... 2 Definitions... 2 Responsibilities... 4 1. Vice-President (Administration) 2.
OSHA Office of Training and Education 1
Flammable and Combustible Liquids OSHA Office of Training and Education 1 Introduction The two primary hazards associated with flammable and combustible liquids are explosion and fire Safe handling and
University of Tennessee Safety Guidelines
University of Tennessee Safety Guidelines Guideline Subject: Compressed Gases and Cryogenics Safety Guidelines Approval Date: 10/1/15 (Rev. 1) Next Scheduled Review: 10/1/19 Date Effective: 1/01/09 Contact
Compressed Gas Cylinders Safety Policy
Compressed Gas Cylinders Safety Policy This is an example of a compressed gas safety policy for a client whose operations include welding. Oxygen and acetylene tanks are in use and in storage at this client's
Compressed Gas Cylinder Program
Department of Environmental Health & Safety Procedures Compressed Gas Cylinder Program March 2010 Compressed Gas Cylinder Program Page 1 of 8 Table of Contents I. Introduction II. III. IV. Policy Scope
Compressed Gas Cylinder Storage and Handling Guide
Overview Compressed gas cylinders are used in many workplaces to store gases that vary from extremely flammable (acetylene) to extremely inert (helium). Many compressed gas cylinders are stored at extremely
EMERGENCY ACTION, EVACUATION AND FIRE PREVENTION SAFETY PROGRAM
EMERGENCY ACTION, EVACUATION AND FIRE PREVENTION SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29CFR1910.36-29CFR1910.38-29CFR1910.157-29CFR1910.165 NFPA-10 BASIS: The OSHA Emergency Action Planning and the
FLAMMABLE LIQUIDS COMPLIANCE NOTE
Issued by: Heather Rice Page: 1 of 7 COMPLIANCE NOTE INTRODUCTION This document provides additional guidance to support the Arrangement on Flammable Liquids (Ref No. CYC/HS/A27) CONTENTS Section Topic
FIRE RISK ASSESSMENT
The Regulatory Reform (Fire Safety) Order 2005 FIRE RISK ASSESSMENT Employer or other responsible person Name of Premises Address Post Code Telephone N o Name of Assessor(s) Date of Assessment Date of
Overview... 9.1. Legislative Requirements... 9.2. Confined Spaces Compliance...9.4. Guidelines for Meeting Legislative Requirements... 9.
Confined Spaces Overview... 9.1 Legislative Requirements... 9.2 Confined Spaces...9.3 Confined Spaces Compliance...9.4 Guidelines for Meeting Legislative Requirements... 9.4 Identification...9.4 Code of
Compressed Gas Cylinder Safety
Compressed Gas Cylinder Safety I. Background. Due to the nature of gas cylinders, special storage and handling precautions are necessary. The hazards associated with compressed gases include oxygen displacement,
Pressure Vessels (Air Compressors) and LPG Tanks
Pressure Vessels (Air Compressors) and LPG Tanks 1. Identification of Workplace Hazard Any container, tank or vessel that contains pressurized material is a potential hazard to employees due to the force
Process Safety Management of Highly Hazardous & Explosive Chemicals. Operating Procedures
Process Safety Management of Highly Hazardous & Explosive Chemicals Operating Procedures Now that the PHA s Are Competed or Underway Operating Procedures & Safety Programs Must Be Developed PHA Information
Fire Safety in Laboratories. University of Tennessee Environmental Health and Safety
Fire Safety in Laboratories University of Tennessee Environmental Health and Safety Fire Safety in Laboratories Fire Prevention is a vital aspect of laboratory safety. Requires knowledge and constant vigilance
A Safe Workplace A Workplace Safety and Health Manual for Your Community Section: III-C Subject: G-9
Page 1 of 7 The following procedure provides the requirements for. Refer to part 15 Confined Spaces, part 6 Personal Protective Equipment, part 14 Fall Protection, of The Manitoba Workplace Safety and
PROCEDURES PREVENTION OF ACCIDENTAL IGNITION
Page No: 1 of 7 6.0 PURPOSE (192.751) All possible precautions shall be exercised to prevent the accidental escape and ignition of gas. Whenever possible, potential sources of ignition should be eliminated
Safety and Health Office WORKPLACE SAFETY CHECKLIST
Location: Date: Inspected by: Safety and Health Office WORKPLACE SAFETY CHECKLIST WORK ENVIRONMENT Ventilation Removal of fumes and dust Temperature and humidity control Noise levels Vibration Lighting
OFM-TG-01-2011. Office of the Fire Marshal F M. Handling Flammable and Combustible Liquids in School Laboratories GUIDELINE
Office of the Fire Marshal O Handling Flammable and Combustible Liquids in School Laboratories F M March 2011 GUIDELINE Acknowledgements The Office of the Fire Marshal would like to acknowledge the contribution
Fire Protection and Prevention
Fire Protection and Prevention The Occupational Safety and Health Administration (OSHA) requires employers to implement fire protection and prevention programs in the workplace. The regulations that apply
TABLE OF CONTENTS 4. CONTRACTOR SHE MANAGEMENT PROGRAM R1400.00 --MANAGEMENT STATEMENT
4. CONTRACTOR SHE MANAGEMENT PROGRAM R1400.00 TABLE OF CONTENTS --MANAGEMENT STATEMENT ADMINISTRATIVE 1. SHE AND ACCIDENT PREVENTION 1-A Discipline 2. NEW HIRE ORIENTATION (Outline) 2-A New Hire Orientation
CONFINED SPACE ENTRY PROGRAM
CONFINED SPACE ENTRY PROGRAM Table of Contents Section 1.0 Program Statement 3 1.1 Confined Space Program 3 1.2 Purpose 3 1.3 Objectives 3 2.0 Regulations/References 3 2.1 Regulations 3 3.0 Responsibilities/Resources
Confined Space Program
Confined Space Program Scope This program outlines the procedures, precautions, responsibilities, and methods used by Name of Company to assure and provide employees a safe and healthy work environment
CONFINED SPACE ENTRY WORK STANDARD
CONFINED SPACE ENTRY WORK STANDARD CONFINED SPACE ENTRY WORK STANDARD Copyright 2007 All rights reserved. Reproduction of this document in whole or in part by any means is prohibited, unless authorized
Fire Protection Plan
Fort Knox Installation Safety Office Fire Protection Plan Fire Protection Plan A fire prevention measure must be developed for all fire hazards found. Once employees are made aware of the fire hazards
California State University, Bakersfield. CONFINED SPACE SAFETY ENTRY PROGRAM (Updated March 2010)
California State University, Bakersfield REFERENCE CONFINED SPACE SAFETY ENTRY PROGRAM (Updated March 2010) The California Labor Code and the California Occupational Safety and Health Act of 1973, requires
Confined Spaces NORTHWEST TERRITORIES & NUNAVUT CODES OF PRACTICE EMPLOYER CODE OF PRACTICE GUIDELINE
Confined Spaces NORTHWEST TERRITORIES & NUNAVUT CODES OF PRACTICE EMPLOYER CODE OF PRACTICE GUIDELINE Yellowknife Box 8888, 5022 49th Street Centre Square Mall, 5th Floor Yellowknife, NT X1A 2R3 Telephone:
CSB Public Meeting February 7, 2010, Natural Gas Explosion Kleen Energy Middletown, Connecticut
CSB Public Meeting February 7, 2010, Natural Gas Explosion Kleen Energy Middletown, Connecticut June 28, 2010 www.csb.gov 1 Tonight s Speakers Lauren Wilson Chemical Incident Investigator Dan Tillema Chemical
ENVIRONMENT, SAFETY, HEALTH, AND QUALITY DIVISION
ENVIRONMENT, SAFETY, HEALTH, AND QUALITY DIVISION Chapter 40: Chemical Lifecycle Management Chemical Storage Asset Requirements Product ID: 223 Revision ID: 1487 Date published: 20 May 2013 Date effective:
Millersville University - Office Of Environmental Health & Safety Scope & Application
Confined Space Entry Millersville University - Office Of Environmental Health & Safety Scope & Application The Confined Space Entry (CSE) program applies to the safe working practices for entering and
LOCKOUT GUIDELINE. To ensure that a piece of equipment cannot be turned on, pressurized or switched on accidently while an employee is working on it.
Background LOCKOUT GUIDELINE Both Aspasa in its ISHE (Initiating Safety Health & Education) program and Sarma in its SHREQ (Safety, Health, Road Transport, Environment & Quality) program have seen that
Fire Prevention Plan for Commons 1655 Musketeer Drive
Commons for Commons 1655 Musketeer Drive Xavier University November 7, 2006 Ken Grossman Page 1 10/29/2013 Table of Contents Introduction... 3 Responsibilities... 3 Major Workplace Fire Hazards... 3 Methods
COMPRESSED GASES. 1.2 The contents of each cylinder and container must be clearly identified (by tag or stamp) on the cylinder.
Page 1 of 5 COMPRESSED GASES A compressed gas is defined as any mixture of gases in a container with a pressure exceeding 40 psi. at 70 o F, or 104 psi. at 130 o F; or any flammable liquid with an absolute
OSHA Training Guidelines (An Unofficial Summary)
OSHA Training Guidelines (An Unofficial Summary) Many standards promulgated by the Occupational Safety and Health Administration (OSHA) explicitly require the employer to train employees in the safety
Business & Legal Reports (BLR) Training. Workplace Safety Online Courses. Accident Investigations. Aerial Lift Safety
Business & Legal Reports (BLR) Training Workplace Safety Online Courses COURSE TITLE Accident Investigations Aerial Lift Safety Americans with Disabilities Act - What Supervisors Need to Know Arc Flash
Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection. OSHA Office of Training and Education 1
Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection OSHA Office of Training and Education 1 Introduction Fires and explosions kill more than 200 and injure more than 5,000 workers
Certain specific properties of compressed gases make them highly useful in various research activities.
GAS CYLINDER SAFETY Introduction Certain specific properties of compressed gases make them highly useful in various research activities. These gases, however, can be dangerous if not handled in an appropriate
Guidance for Those Who Use and Store Gas Cylinders
King s Gate Tel 6320 www.safety.ncl.ac.uk Safety Office February 2012 Guidance for Those Who Use and Store Gas Cylinders Version 3 Newcastle University 2012 This guide is designed to help staff manage
Safety and Health Resource Manual. Sample Permit-Required Confined Space Written Program
Sample Permit-Required Confined Space Written Program Purpose The purpose of this document is to communicate Employer s compliance with MIOSHA s requirements for a permit-required confined space entry
Confined Space Entry Safety Program
Facilities Operations and Development Environmental Health and Safety 1314 Kinnear Road #106 Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404 Fax www.ehs.osu.edu Confined Space Entry Safety Program
FACILITY SAFETY SIGNAGE GUIDE: 10 SIGNS TO SPOT DURING A PLANT WALKTHROUGH
FACILITY SAFETY SIGNAGE GUIDE: 10 SIGNS TO SPOT DURING A PLANT WALKTHROUGH Safety signs are the primary way to communicate important warnings and messages to your employees, on-site contractors and other
If you have any questions about how to safely undertake a task or project, ask your supervisor before you begin.
Laboratory Health and Safety Manual Section 1: Introduction and Objectives This manual provides a set of minimum standards and practices for the safe and healthy operation of a laboratory. Following the
SURVIVE INSIDE: Employee Safety in Confined Spaces
SURVIVE INSIDE: Employee Safety in Confined Spaces This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description of the
Flammable and Combustible Liquids. Slide 1 (of 23)
Flammable and Combustible Liquids Slide 1 (of 23) Introduction The two primary hazards associated with flammable and combustible liquids are explosion and fire Safe handling and storage of flammable liquids
ENTERING AND WORKING IN CONFINED SPACES MANUAL. Prepared by Environmental Health & Safety Department
ENTERING AND WORKING IN CONFINED SPACES MANUAL Prepared by Environmental Health & Safety Department Reviewed November 20, 2005 INTRODUCTION Entering and working in confined spaces has been and will continue
Process Safety Management of Highly Hazardous & Explosive Chemicals. Management of Change
Process Safety Management of Highly Hazardous & Explosive Chemicals Management of Change What if Our PHA s Reveal the Need to Change Something In our System to Minimize the Potential for Release We Must
READ FIRST. Confined Space Entry Procedure. San José State University Environmental Health and Safety. Confined Space Entry Procedure
READ FIRST 1. The purpose of a is to save lives by controlling the inherent hazards of a confined space prior to entry. a. If possible, avoid entering a confined space. Every consideration should be given
POLICY. Emergency response team means a group of persons trained, equipped, and available to respond to confined space emergencies.
POLICY Number: 7311-95-006 Title: Confined Space Management Authorization [ ] President and CEO [X] Vice President, Finance and Corporate Services Source: Director, Facilities Management Cross Index: Date
Static Electricity. A Health and Safety Guideline for Your Workplace. What Are Some Sources of Static Electricity? What is Static Electricity?
A Health and Safety Guideline for Your Workplace What is static electricity? What causes it? How is it hazardous? And, most importantly, how can it be controlled? All of these questions will be answered
SCBA Frequently Asked Questions
SCBA Frequently Asked Questions Q. WHEN SHOULD I USE SCBA? A. An SCBA is the choice when dealing with any oxygen deficient atmosphere that is IDLH (Immediately Dangerous to Life or Health), or any environment
Fire Prevention Plan for Flynn Hall 1648 Musketeer Drive
Audit and Risk Management and Xavier Police Fire Prevention Plan for Flynn Hall 1648 Musketeer Drive Xavier University October 12, 2006 Ken Grossman Page 1 10/29/2013 Table of Contents Fire Prevention
CONFINED SPACE ENTRY REQUIREMENTS
CONFINED SPACE ENTRY REQUIREMENTS Safety Hazards in Confined Spaces A. The Contractor shall comply with the following, including all appendices, when entering any confined space on Maryland Aviation Administration
PERSONAL PROTECTIVE EQUIPMENT FOR CALIFORNIA STATE UNIVERSITY, LOS ANGELES
PERSONAL PROTECTIVE EQUIPMENT FOR CALIFORNIA STATE UNIVERSITY, LOS ANGELES OCTOBER 2007 PROGRAM APPROVAL AND AUTHORIZATION James M. Rosser, President Date TABLE OF CONTENTS TITLE Section PURPOSE...1.0
Oxy-Fuel Gas Welding. Given a functional oxy-fuel gas unit, instruction and demonstration of use, each student will be able to:
I. Competencies Oxy-Fuel Gas Welding Given a functional oxy-fuel gas unit, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the oxy-fuel gas unit. B. Pass
CONSTRUCTION FIRE SAFETY PLANNING GUIDELINES
CONSTRUCTION FIRE SAFETY PLANNING GUIDELINES Review the following information pertaining to Construction Fire Safety Planning: B.C. Building Code Sections 8.1 up to and including Subsection 8.2.3 B.C.
HEALTH, SAFETY AND ENVIRONMENT HANDBOOK HSE
HEALTH, SAFETY AND ENVIRONMENT HANDBOOK HSE CNOOC Limited 1 Message from CEO Dear Colleagues, CNOOC Limited is the largest producer of offshore oil & gas in China and is one of the largest oil & gas exploration
Installation Instructions for Alarm Module Kit A043F059
Instruction Sheet 07-2013 Installation Instructions for Alarm Module Kit A043F059 1 Introduction The information contained within is based on information available at the time of going to print. In line
HSE Requirements for Contractors
PROJECT DEFINITION AND CONTACTS Project Title: Kodak is obligated to identify any known and potential Health, Safety, and Environmental (HSE) hazards to individuals who might be affected by them. This
In addition, flammable solvents and thinners are often mixed with the above substances.
1 of 7 This guidance note describes the measures required to control the risk to health and safety when spraying flammable liquids. Flammable liquids Flammable liquids are dangerous goods of Class 3. They
Notes. Material 1. Personal Protective Equipment 2.
29CFR 1926.20(b)-Accident Reduction, 29CFR 1926.21- Safety Training & Education 29CFR 1926.20(a)-Unsafe Working Conditions 29 CFR 1910.132-138, the "Personal Protection Equipment" standard. & 20 CFR 1910.134
MATERIAL SAFETY DATA SHEET. PRODUCT IDENTIFIER Carbon Dioxide, Refrigerated Liquid
SECTION I- Product Information* MANUFACTURER: EPCO Carbon Dioxide Products, Inc. OFFICE PHONE: 1-800-259-3726 24-HOUR EMERGENCY: 1-800-259-8095 SHIPPING NAME: Carbon Dioxide, Refrigerated Liquid UN NUMBER:
FIRE EXTINGUISHER TRAINING
FIRE EXTINGUISHER TRAINING Fire safety, at its most basic, is based upon the principle of keeping fuel sources and ignition sources separate. Three things must be present at the same time to produce fire:
Natural Gas Emergencies
Natural Gas Emergencies Purpose To protect the personnel within the department, and citizens from the hazards involved in a natural gas emergency. The Incident Commander is to use his/her best judgment
FLA S FIRE SAFETY INITIATIVE
Improving Workers Lives Worldwide FLA S FIRE SAFETY INITIATIVE Preventing fires and saving lives by empowering workers and factory managers SCENARIO 1 OCCURS AT FACTORY ABC, WHICH HAS NOT IMPLEMENTED NECESSARY
ECHM Recommendations for Safety in multiplace medical hyperbaric chambers
ECHM Recommendations for Safety in multiplace medical hyperbaric chambers Coordination and Correspondence : D. MATHIEU, Service d'urgence Respiratoire, de Réanimation Médicale et de Médecine hyperbare
CONFINED SPACE PROGRAM
California Institute of Technology CONFINED SPACE PROGRAM Caltech Environment, Health, and Safety Office 1200 E. California Blvd., M/C 25-6 Pasadena, CA 91125 Phone: 626.395.6727 Fax: 626.577.6028 Email:
Safety, Health, and Environmental (SHE) Program Visitor Awareness Training (SHE 101V)
Marshall Space Flight Center Safety, Health, & Environmental (SHE) Program Safety, Health, and Environmental (SHE) Program Visitor Awareness Training (SHE 101V) SHE 101V Presented By: MSFC Industrial Safety
This leaflet provides information on
This leaflet provides information on the fire and explosion hazards in the use of oxygen. It is for anyone who uses oxygen gas in cylinders. HSE8(rev2) Hazards from oxygen Oxygen gas in cylinders is used
MATERIAL SAFETY DATA SHEET
Air Liquide New Zealand Limited 19 Maurice Road Penrose Auckland 1061 Product Name: MATERIAL SAFETY DATA SHEET ALPHAGAZ TM 1 - Oxygen Phone: (09) 622 3880 Fax: (09) 622 3881 Emergency: 0800 156 516 Issued:
Subject: Magnet Safety. Overview: Environmental Health & Safety Policy/Procedure Effective Date: July 29, 2011
Subject: Magnet Safety Environmental Health & Safety Policy/Procedure Overview: The purpose of this document is to define and clarify policies associated with the use of magnets and magnetic fields at
Take care with oxygen Fire and explosion hazards in the use of oxygen
Fire and explosion hazards in the use of oxygen This leaflet provides information on the fire and explosion hazards in the use of oxygen. It is for anyone who uses oxygen gas in cylinders. Hazards from
In progress. Basically a Confined Space Entry Plan has to answer the following questions:
In progress Basically a Confined Space Entry Plan has to answer the following questions: -what s a confined space? -what conditions make a permit space (specify hazardous atmosphere and acceptable atmosphere)?
Job Hazard/Safety Analysis For the Paint & Finish Worker
Job Hazard/Safety Analysis For the Paint & Finish Worker 1 INTRODUCTION Job Hazard/Safety Analysis for the Paint & Finish Worker is a partial list of known task performed by the professional paint and
FIRE PREVENTION PLAN
FIRE PREVENTION PLAN 1 FIRE PREVENTION PLAN OSHA s Fire Prevention Plan regulation, found at 29 CFR 1910.38(b) and 29 CFR 1926.24, requires Northern Clearing, Inc. to have a written fire prevention plan
UNIVERSITY. Facilities Management
EAST TENNESSEE STATE UNIVERSITY Policy Number: 700.3 Title: Confined Spaces Policy Implementation Date: 2005 Last Revised: September 15, 2014 Introduction Facilities Management This plan applies to all
Confined Space Entry Policy
University of Illinois at Urbana-Champaign Facilities & Services Division of Safety and Compliance Confined Space Entry Policy Reviewed November 2012 UNIVERSITY OF ILLINOIS AT URBANA-CHAMPAIGN CONFINED
An inventory of hazardous materials used in your workplace will prove useful.
Introduction Fire Protection is an organized approach designed to prevent fires. In the event of a fire, a fire protection program will help prevent or minimize personal injuries, losses, and harm to the
Safe Operating Procedure
Safe Operating Procedure (Revised 11/15) PERSONAL PROTECTIVE EQUIPMENT (PPE) EYES AND FACE Introduction Eye and/or face is mandated by federal Occupational Safety and Health Administration (OSHA) standards,
Ethanol Vehicle and Infrastructure Codes and Standards Citations
Ethanol Vehicle and Infrastructure Codes and Standards Citations This document lists codes and standards typically used for U.S. ethanol vehicle and infrastructure projects. To determine which codes and
Confined Space Entry
Confined Space Entry Flood and Peterson s Risk Control Symposium OSHA s New Confined Spaces in Construction Standard What Employers Need to Know 10/16/2015 This document is available for your use at www.floodpeterson.com.
LABORATORY SAFETY GUIDELINES
LABORATORY SAFETY GUIDELINES Contents 1 Introduction 2 2 Responsibilities 2 2.1 Deans and Heads of Unit 2 2.2 Laboratory Supervisors 2 2.3 Staff and Students 2 2.4 Contractors 2 3 Laboratory Access and
SAFETY & ENVIRONMENTAL PROCEDURES
SAFETY & ENVIRONMENTAL PROCEDURES for CONTRACTORS APS Technology 7 Laser Lane Wallingford, CT 06492 860-613-4450 aps-tech.com 6 Northrop Industrial Park Road Wallingford, CT 06492 860-613-4450 15415 International
Forename: Surname: School / College/ Institution. Course date: / / RDTHSC:
Specialist Extension Level S5HS Forename: Surname: School / College/ Institution Course date: / / RDTHSC: These Training and Accreditation Guidelines are based on the following essential publications:
On-Line Fire Extinguisher Training
On-Line Fire Extinguisher Training The USC Fire Safety Office is delighted you have chosen to take the on-line version of our fire extinguisher training. This power-point presentation will give you some
HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING
HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief
Confined Space Entry Procedure Worksheet
1. Location Exact name and location of space to be entered. Confined Space Entry Procedure Worksheet 2. Hazard Identification & Determination - (circle all that apply) a. Tasks to be performed. Welding/Cutting
Confined Space Training. Developed and Presented by: Scott Cole, CSP (440) 520-9499 scole@amhigley.com
Confined Space Training Developed and Presented by: Scott Cole, CSP (440) 520-9499 scole@amhigley.com Objectives To understand and recognize a confined space, To understand the difference in a permit required