Leica Geosystems Metrology Accessories Catalog 2006

Transcription

1 Leica Geosystems Metrology Accessories Catalog 2006

2 Leica Laser Tracker Accessories Catalog 2006

3 Contents Leica Laser Trackers Leica Industrial Theodolites & Total Stations

4 Notes for the Reader Thank you for ordering a copy of the 2006 Leica Metrology Accessories Catalog. This catalog contains the complete range of accessories available for Leica Laser Trackers and Leica Industrial Theodolites & Total Stations. Regardless of your particular application and the Leica Metrology products you use from Leica Laser Trackers, Leica Industrial Theodolites & Total Stations and everything in-between we have you covered. Easy-to-interpret diagrams and product illustrations & descriptions let you quickly find the Leica Metrology accessories that are ideally suited for the task at hand. Most items feature a description and a picture. Some accessories show an example of how the items can be used in a typical configuration and what benefit they bring. All of our accessories, just like the rest of the Leica Metrology products, offer the same top-notch, no-nonsense design and quality. If you have any questions about our product accessories, please contact your authorized Leica Metrology sales person to receive competent guidance and make an appropriate purchasing decision. Sincerely, Your Leica Metrology Team

5 Leica Laser Trackers Leica Laser Tracker Configuration for Standard Tracking Systems Leica Laser Tracker Configuration for Probing Systems Leica Laser Tracker Configuration for Scanning Systems Universal CMM Accesories Leica T-Probe/T-Probe II Leica T-Cam Leica T-Scan Tracker Stands Cables & UPS Remote Control Equipment Levelling Equipment Overview Camera Equipment Meteo Station & Accessories Leica Reflectors Leica Laser Tracker 1.5 Reflector Holders Leica Laser Tracker 0.5 Reflector Holders Special Reflector Holders Hidden Point Bars Compensation and Field Check Tools Shipping Container and Measuring Cart

6

7 Leica Laser Tracker Configuration for Standard Tracking Systems 8

8 Reflectors Reflector Holders and Accessories Leica T-Probe/T-Probe II and Accessories

9 Leica Laser Tracker Configuration for Probing Systems 10

10 Reflectors Reflector Holders and Accessories Leica T-Probe/T-Probe II and Accessories

11 Laser Tracker Configuration for Scanning Systems 12

12 Reflectors Reflector Holders and Accessories Leica T-Probe/T-Probe II and Accessories

13 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Leica T-Probe/T-Probe II T-Probe II styli kit Recommended stylus kit for T-Probe II. Comes with 5 different styli (Scribe stylus r=0.1mm - M2, Ruby ball stylus d=3mm - M5, Ruby ball stylus d=6mm - M5, Ceramic hemispherical stylus d=0.5in - M4, Ceramic hemispherical stylus d=1.0in - M4), 3 styli extensions (100mm - M5 - carbon fibre - stem d=20mm, 200mm - M5 - carbon fibre - stem d=20mm, 40mm - M5 - carbon - stem d=11mm), 2 T-Probe II stylus adaptors - M5 with precision quick release for self identification, stylus tools for M2-M3/M4/M5 threaded styli, stylus adaptor M5-M4 and T-Probe II styli kit case T-Probe II styli kit case for standard configuration (empty) T-Probe II stylus adaptor M5 Precision quick release adaptor for T-Probe II styli to remove and attach styli without re-calibration. The stylus adaptor has built in intelligence to support stylus self identification T-Probe Holder Optional T-Probe holder for save positioning the T-Probe on workstations and measurements surfaces such as car bodies Cable T-Probe, 10m Cable T-Probe, 20m T-Probe replacement battery Magnetic T-Probe Stylus Compensation Kit Optional for save positioning on magnetic materials to perform stylus compensations. 208 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 14

14 LTD640 LTD709 LTD Leica T-Probe Compensation Kit For on-site compensation of T-Probe. It comes with T-Probe reference frame, wedge tool, tripod screw and light duty magnetic holder for 0.5 Red Ring Reflectors. Requires additional 0.5 Red Ring Reflector (corner cube) for compensation process. The T-Probe compensation kit fits into the LeicaT-Cam compensation kit shipping container Stylus extension 100mm - M5 - carbon fibre - stem d=20mm Stylus extension 200mm - M5 - carbon fibre - stem d=20mm Stylus extension 400mm - M5 - carbon fibre - stem d=20mm Stylus extension 600mm - M5 - carbon fibre - stem d=20mm Stylus extension 40mm - M5 - carbon - stem d=11mm Stylus extension 100mm - M5 - carbon - stem d=11mm Scribe stylus r=0.1mm - M Ruby ball stylus d=3mm - M Ruby ball stylus d=6mm - M

15 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Edge stylus - M5 Comes with edge sphere 0.5, magnetic stylus M5 and compensation sphere Stylus tool for M2 and M3 threaded styli Stylus tool for M4 threaded styli Stylus tool for M5 threaded styli Stylus adaptor M5-M Stylus adaptor M5-M Stylus adaptor M4-M Ceramic hemispherical stylus d=0.5in - M Ceramic hemispherical stylus d=1.0in - M4 218 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 16

16 LTD640 LTD709 LTD840 Leica T-Cam Sync Package for LTCbase / plus Required for Leica T-Cam but also enables synchronization and trigger with external devices. Required for upgrades and for Laser Tracker's delivered before Jan 2005 only. 222 E std. std Leica T-Cam compensation kit For on-site compensation of T-Cam to Tracker. Requires additional 0.5 Red-Ring Reflector (corner cube) for compensation process. It is recommended to have at least one compensation kit per factory. It comes with transportation case Overview camera for Leica T-Cam Optional overview camera that can be mounted to T-Cam. It enables save and convenient reflector lock via video image Cable T-Cam, 10m Cable T-Cam, 5m Leica T-Scan Reference Sphere with certificate Ø 100mm Reference sphere with 100 mm diameter for field check and alignment checks of the T-Scan system Reference Sphere Bar with certificate, 2m Reference bar with 5 spheres at 40cm distance. Each sphere to sphere distance is traceable certified. Diffuse sphere surfaces are special made for scanner measurements High speed computer for fast data collection and powerful graphical visualization (Pentium 4 Processor with 3.0 Ghz; 2 DDRAM 512 MB; Quadro4 Graphics Card)

17 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Tracker Stands Worlds lightest heavy duty tripod featuring Vibration free stand Light for easy transportation Large wheels for easy movements Can be taken apart for transport Quick release from minutes to seconds Stand extension, 380mm (15) Stand extension for Laser Tracker sensor Stand extension, 180mm (7) Stand extension for Laser Tracker sensor Leica Tracker stand The Leica Tracker stand is equipped with three levelling screws and shock absorbing wheels Mounting plate for Laser Tracker. Allows to mount the sensor unit onto machine beds etc., requires part number Leica Stand Adaptor Rings Used to adapt a Leica Laser Tracker to Leica stand or optical instrument stand for quick mounting or removable. Material is hard coat aluminium in black anodized finish OUTSIDE DIAMETER 11.0 OUTSIDE DIAMETER METRIC TAPPED HOLE FOR LEICA TRACKER BASE ALL BOLTS (4 PLACES) 7.0 INSIDE DIAMETER CLEARANCE BOLT HOLES FOR LEICA LASER TRACKER HEAD (Metric Mounting Bolt) 3/8-16 TAPPED HOLES FOR CONNECTING SHOULDER BOLTS (4 PLACES) L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 18

18 LTD640 LTD709 LTD Leica Tracker Horizontal Mount This mount allows the Leica tracker (without T-Cam) to lay securely in the horizontal position in a unique V nest (with or without adapter rings). The mount will fit to the Leica stand or an heavy optical instrument stand with 3/8 thread. Material is hard coat aluminium in black anodized finish. 316 Cables & UPS Industrial cables and Network adapters for LAN as well as UPS units Motor cable to Leica Trackers 10m (33') Motor cable to Leica Trackers, 5m (16') Sensor cable to Leica Trackers 10m (33') Sensor cable to Leica Trackers, 5m (16') Elbow plug set, for motor- and sensor cable, comprising: Elbow plug, for motor cable, 16 pin Elbow plug, for sensor cable, 54 pin 328 L LAN cable RJ45, 5m LAN cable to connect Laser Tracker with application computer LAN board for Desktop PC Wireless network adapter for Laptop/Desktop WiFi USB Adapter connects to b/g networks and hotspots. This article is used together with article to establish a network between application computer (Laptop/Desktop) and Laser Tracker (emscon Server). It comes with: USB Adapter for Laptop/Desktop, cradle and instruction sheet. This network configuration (576232/576233) has been tested by Leica and ensures system performance

19 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Wireless network adapter for emscon Server WiFi certified Access Point creates high-performance g wireless network. This article is used together with article to establish a network between application computer (Laptop/Desktop) and Laser Tracker (emscon Server). It comes with: Access Point for emscon Server, power adapter and instruction sheet. This network configuration (576232/576233) has been tested by Leica and ensures system performance Uninterruptible Power Supply UPS (220 Volt) Uninterruptible Power Supply UPS (110 Volt) Remote Control Equipment Wireless RF Control (EU version) Australia, EU, Czech Republic, Hungary, Malaysia, Mexico, New Zealand, Norway, Philippines, Poland, Russia, Switzerland, Thailand (Radio Frequency: 40MHz, Plugs into a USB port on a Windows computer) Incl. CD with drivers and templates for Axyz, Metrolog XG and emscon Wireless RF Control (US version) US, Brazil, Canada, Israel (Radio Frequency: 49Mhz, Plugs into a USB port on a Windows computer) Incl. CD with drivers and templates for Axyz, Metrolog XG and emscon Wireless IR Control Wireless Infra-Red Control unit for USB port. Compatible with: Windows 98 SE, 2000, ME, XP or higher. Incl. CD with drivers and templates for Axyz, Metrolog XG and emscon. 343 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 20

20 LTD640 LTD709 LTD840 Levelling Equipment High-performing level For measurements against gravity and monitoring stability. Ready to measure to specs within minutes (no need for 0-point adjustment) Backward compatibility (except SMART310) NIVEL230, inclination sensor for Laser Tracker with RS232 interface; supports gravity based coordinate measurements NIVEL Adapter Kit The NIVEL adapter kit is used to mount all NIVEL inclination sensor onto the Laser Tracker. Compatible with LT(D)640, LTD706, LTD709, LTD Cable, 1.5m (Lemo - Lemo) To connect Laser Tracker with NIVEL20 or NIVEL Overview Camera Equipment The unique overview camera allows a quick location of reflectors. While in joystick mode you direct the tracker to the point of interest. Thus it becomes an essential accessory for remotely controlled trackers Video Cable 10m, BNC / BNC, (LT Controller to View finder video board) View finder video board for desktop PC, incl. Cable, 1.8m. For overview camera with old Axyz versions under Windows NT 362 E Video Grabber DX for Desktop (Axyz only), comprising: 1x Pixel View Model No. PC-CX881P (PCI), 1x Adapter Plug, 1x Video cable (10m), 1x Video Grabber Hardware Installation sheet for Axyz Users. For Windows 2000 & Windows XP

21 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Video Grabber DX for Notebook (Axyz only), comprising: 1x Notebook Grabber (USB), 1x Adapter plug, 1x Video Cable (10m), 1x Video Grabber Hardware Installation sheet for Axyz Users. For Windows 2000 & Windows XP Overview Camera for Laser Tracker The Optional black/white overview camera mounts on top of the Laser Tracker. It enables save and convenient reflector lock via video image. The camera functionality is supported during the various measuring modes of LTD840, LTD706, LTD709, LTD640 Laser Tracker, which has the absolute distance meter, built in. 365 Meteo Station & Accessories The most precise sensor to monitor and correct the atmospheric conditions. It is an essential accessory for any precision measurements Set Meteo Station HM30 with integrated pressure sensor, comprising: Meteo Station HM30, RS232 cable, 9-pole female, 1.5m. Combo-sensor for humidity/temperature with cable 3m. Power supply VAC/9VD/1150mA with universal plugs for Europe, UK, USA/Japan 401 L Meteo Station HM Combo-sensor humidity/temperature with cable, 3m 403 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 22

22 LTD640 LTD709 LTD Surface temperature sensor PT100, 30cm Mini temperature sensor PT Power supply, VAC/9VDC, with universal plugs for Europe, UK, USA/Japan, Australia Leather case for meteo station HM Cable RS232 for meteo station HM Replacement cable to combo-sensor Cable to combo-sensor, 3m Cable to combo-sensor, 5m Cable to combo-sensor, 15m Cable to PT100, 3m Cable to PT100, 5m Cable to PT100, 25m Multiplexer to connect up to 16 surface temperature sensors ( ), with cables to HM HM30 Factory Certification Factory Certification for HM30, together with combosensor. Certificate issued for humidity, temperature and pressure to the producer's standards, performed by Revue Thommen in Switzerland. To be ordered at your local service centre (or check local possibilities). 23

23 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Reflectors The widest range of offering for most various applications Red-Ring Reflector (RRR) 1.5, ball with hardened steel surface. Corner cube reflector with removable ring, protection cover for optic and certificate, in wooden box Radius 0.75 (19.05mm) ±0.0025mm, Centring of optics ±0.006mm Shape ball ±0.0015mm Acceptance angle ±30 Weight 170g Applied for - Standard applications - Dynamic and static measurements Red-Ring Reflector (RRR) 0.5, ball with hardened steel surface, Corner cube reflector with removable ring, protection cover for optic and certificate, in wooden box Radius 0.25 (6.35mm) ±0.0025mm, Centring of optics ±0.006mm Shape ball ±0.0015mm Acceptance angle ±30 Weight 5g Applied for - Standard applications - Automated inspection Tooling Ball Reflector (TBR) 0.5, without collar ball with hardened steel surface, ø 0.5 (12.07mm) ±0.01mm, Centring of optics ±0.006mm Shape ball ±0.01mm Max. acceptance angle ±50 (±15 for error budget < 0.01mm) Weight 5g Applied for - Standard applications - Automated inspection 503 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 24

24 LTD640 LTD709 LTD Tooling Ball Reflector (TBR) 0.5, with collar ball with hardened steel surface, ø 0.5 (12.07mm) ±0.01mm, Centring of optics ±0.006mm. Shape ball ±0.01mm. Max. acceptance angle ±22 (±15 for error budget < 0.01mm) Weight 5g Applied for - Standard applications - Automated inspection Reflectors for fixed installation (RFI) 0.5, set of 5 pcs., ball with anodized aluminium surface, ø 0.5 (12.07mm), Max. acceptance angle ±50 Weight 5g. Applied for - Monitoring fixed installations - Repeatability tests - Relative measurements - Deformation measurements Cateye Reflector (CER), ball with hardened steel surface, ø 75mm (2.9528), ±0.05mm Ball shape ±0.01mm Centring of optics ±0.01mm Max. acceptance angle ±60 Weight 730gr Applied for - Robot and machine operations - Dynamic and static measurements Surface Reflector Kit including: - Surface Reflector with lanyard - Pin Point Stylus - 3 mm Ruby Ball Stylus - Edge Stylus - Initialisation sphere - Manual

25 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Laser Tracker 1.5 Reflector Holders Reflector Holder 1.5, Offset H 24mm, Magnetic Base with Shank A Ø 6mm, Negative Rotation Reflector Holder 1.5, Offset H 24mm, Magnetic Base with Shank A Ø 8mm, Negative Rotation Reflector Holder 1.5, Offset H 24mm, Magnetic Base with Shank A Ø 10mm, Negative Rotation Reflector Holder 1.5, Offset H 24mm, Magnetic Base with Shank A Ø 12mm, Negative Rotation Refl. Holder 1.5, 25mm, Ø 5mm, MB, NEGR Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 5mm, Negative Rotation Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 6mm, Negative Rotation Refl. Holder 1.5, 25mm, Ø 7mm, MB, NEGR Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 7mm, Negative Rotation Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 8mm, Negative Rotation Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 9mm, Negative Rotation Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 10mm, Negative Rotation Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 12mm, Negative Rotation Reflector Holder 1.5, Offset H , Magnetic Base with Shank A Ø , Negative Rotation Reflector Holder 1.5, Offset H 1.000, Magnetic Base with Shank A Ø , Negative Rotation Reflector Holder 1.5, Offset H 1.000, Magnetic Base with Shank A Ø , Negative Rotation - Greatest amount of negative rotation below horizontal position - Allows for unobstructed 100% clear aperture - Centring and height tolerance within mm ( ) - Steel with black oxide finish L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 26

26 1.600 PRECISION (3) P OINT N EST ON C/L OF A DIAMETER WITHIN ± DIAMETER SMR REFERENCE H ±.0005 TO CENTERLINE OF SPHERE MAGNET "A" DIAMETER PATENT PENDING 27

27 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Reflector Holder 1.5, Offset H 24mm, Shankless, Magnetic Base Reflector Holder 1.5, Offset H 25mm, Shankless Magnetic Base Reflector Holder 1.5, Offset H , Shankless Magnetic Base - Centring and height tolerance within mm (0.0005) - Steel with black oxide finish - Heat-treated and hardened to Rockwell C * * * PRECISION (3) POINT NEST ON C/L OF DIAMETER WITHIN +/ DIAMETER SMR REFERENCE H +/ TO CENTERLINE OF SPHERE MAGNET MAGNETS 3/32 45 CHAMFER ON (1) SIDE FOR CLEARANCE OVER INSIDE CORNER RADIUS / L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 28

28 LTD640 LTD709 LTD Reflector Holder 1.5, Offset H , with Shank A Ø , Body Ø Centring and height tolerance within mm (0.0005) - Steel with black oxide finish 620 *.750 DIAMETER DIAMETER SPHERE REFERENCE ON CENTERLINE OF SHANK W/IN +/ H +/ TO CENTERLINE OF SPHERE MAGNET "A" DIAMETER

29 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Edge Reflector Holder 1.5, offset H 25mm Edge Reflector Holder 1.5, Offset H Centring and height tolerance within mm (0.0005) - Steel with black oxide finish - Heat-treated and hardened to R/C CENTERLINE OF PRECISION (3) POINT NEST IN LINE WITH DATUM "A" WITHIN +/ DATUM A DIAMETER SMR REFERENCE H +/ TO CENTERLINE OF SPHERE MAGNET L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 30

30 LTD640 LTD709 LTD Edge Reflector Holder 1.5, Offset H 25mm 2-1/4 620 CENTERLINE OF PRECISION (3) POINT NEST IN LINE WITH DATUM "A", DATUM B AND THE SHARP EDGE INTERSECTING POINT WITHIN +/ * DATUM "A" DIAMETER SMR REFERENCE H +/ TO CENTERLINE OF SPHERE MAGNET 1/4 LOCATING QUADRANT * DATUM "B" 31

31 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Edge Reflector Holder 1.5, Offset H 1.000, 2-1/4 - Centring and height tolerance within mm ( ) - Steel with black oxide finish - Heat-treated and hardened to R/C CAUTION: These items will not balance over an edge by themselves but must be securely fastened to prevent reflector from dropping Drift Nest Neg 1.5, Offset H Universal target for non-critical reference - Can be glued or bonded to surface - Height tolerance within 0.254mm (0.010 ) - Aluminium with black anodized finish - Hard-coat DIAMETER SMR REFERENCE /-.010 TO CENTERLINE OF SPHERE MAGNET L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 32

32 LTD640 LTD709 LTD Foundation Reflector Holder Can be mounted to floor for permanent target reference - Stainless steel (3) POINT NEST FOR LOCATING 1.5 SMR OR OTHER 1.5 SPHERICAL TARGET DIAMETER SMR REFERENCE 1.25 MAGNET MEDIUM KNURL 2.0 REMOVABLE BRASS CAP WITH 0-RING SEAL 2.0 RETAINER SCREW WITH O-RING SEAL 33

33 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Reflector Holder 1.5, Offset H 25mm, Magnetic Base with Shank A Ø 10mm, 1.0 Inch Body - Centring and height tolerance within mm ( ) - Steel with black oxide finish DIAMETER SPHERE REFERENCE ON CENTERLINE OF SHANK W/IN +/ H +/ TO CENTERLINE OF SPHERE MAGNET (4) PLACE S "A" DIAMETER L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 34

34 LTD640 LTD709 LTD Tripod Reflector Holder Tripod reflector holder for consistent reference point - Steel with black oxide finish * (3) POINT NEST LOCATING AREA DIAMETER SMR REFERENCE MAGNET 1/4 HOLE 5/

35 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Laser Tracker 0.5 Reflector Holders Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 5mm Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 6mm Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 7mm Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 8mm Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 9mm Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 10mm Reflector Holder 0.5, Offset H 10mm, Magnetic Base with Shank A Ø 12mm Reflector Holder 0.5, Offset H 12mm, Magnetic Base with Shank A Ø 6mm Reflector Holder 0.5, Offset H 12mm, Magnetic Base with Shank A Ø 8mm Reflector Holder 0.5, Offset H 12mm, Magnetic Base with Shank A Ø 10mm Reflector Holder 0.5, Offset H 12mm, Magnetic Base with Shank A Ø 12mm Reflector Holder 0.5, Offset H 20mm, Magnetic Base with Shank A Ø 4.75mm Reflector Holder 0.5, Offset H , Magnetic Base with Shank A Ø Reflector Holder 0.5, Offset H , Magnetic Base with Shank A Ø L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 36

36 LTD640 LTD709 LTD Reflector Holder 0.5, Offset H , Magnetic Base with Shank A Ø Reflector Holder 0.5, Offset H , Magnetic Base with Shank A Ø Centring and height tolerance within mm ( ) - Steel with black oxide finish

37 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Reflector Holder 0.5, Offset H10mm, Shankless Reflector Holder 0.5, Offset H 12mm, Shankless Reflector Holder 0.5, Offset H , Shankless - Centring and height tolerance within mm ( ) - Steel with black oxide finish / H +/ TO CENTERLINE OF.5000 SPHERE.5000 DIAMETER SPHERE REFERENCE ON CENTERLINE OF.5000 INCH BODY WITHIN +/ MAGNET (2) PLACES L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 38

38 LTD640 LTD709 LTD Reflector Holder 0.5, Offset 10mm, with Shank Ø 5mm Reflector Holder 0.5, Offset H 12mm, Shank A Ø 6mm Reflector Holder 0.5, Offset H , Shank A Ø Reflector Holder 0.5, Offset H , Shank A Ø Reflector Holder 0.5, Offset H , Shank Ø Centring and height tolerance within mm ( ) - Steel with black oxide finish DIAMETER SPHERE REFERENCE ON CENTERLINE OF SHANK WITHIN +/ H +/ TO CENTERLINE OF.500 SPHERE MAGNET "A" DIAMETER

39 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Reflector Holder 0.5 Drift Nest, Offset H Universal target for non-critical reference - Can be glued to surface - Height tolerance within 0.254mm (0.010 ) - Steel with black oxide finish DIAMETER REFERENCE.500 +/-.010 HEIGHT MAGNET Reflector Holder 0.5 Target Corner, Offset H Centring and height tolerance within mm ( ) - Steel with black oxide finish DIAMETER TBR REFERENCE H +/ TO CENTERLINE OF.5000 SPHERE MAGNET DATUM A TBR REFERENCE IN LINE WITH DATUM A WITHIN +/ L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 40

40 LTD640 LTD709 LTD Reflector Holder 0.5, Offset H , Shank A Ø , Negative Rotation - Centring and height tolerance within mm ( ) - Steel with black oxide finish.5000 DIAMETER TBR REFERENCE ON CENTERLINE WITHIN +/ H +/ TO CENTERLINE OF.5000 SPHERE MAGNET "A" DIAMETER PATENT PENDING Magnetic holder with zero thickness for 0.5 reflectors 41

41 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Special Reflector Holders Magnetic Holder Set for Bird Bath - Bird bath adapter for 0.5 and 1.5 reflectors - Compatible with 500/600/700/800 Leica Laser Tracker as well as IFM distance tool - Height tolerance within mm ( ) - Stainless steel SPHERE REFERENCE MAGNET 12MM SPHERE REFERENCE 25MM +/ TO CENTERLINE OF SPHERE MAGNET 12MM L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 42

42 LTD640 LTD709 LTD Magnetic Holder 1.5 for Bird Bath - Bird bath adapter for 1.5 reflectors - Compatible with 500/600/700/800 Leica Laser Tracker as well as IFM distance tool - Height tolerance within mm ( ) - Stainless steel 1.5 SPHERE REFERENCE MM +/ TO CENTERLINE OF SPHERE MAGNET MM +/ Starter bolt for tooling ball reflector Heavy Duty Magnetic Holder for tooling ball reflectors Light Duty Magnetic Holder for tooling ball reflectors

43 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Heavy Duty Magnetic Reflector Holder Adaptor for supports with shank Ø 12mm - Universal magnetic holder for critical temporary references whilst field check or as common point for move station - Hard anodized aluminium SLIP FIT FOR 12MM +/ MM 640 MAGNET MAGNET SAVER Leica Lanyard Set 1 (full) for safe handling of 1.5 reflectors Leica Lanyard Set 2 (partial) for safe handling of 1.5 reflectors L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 44

44 LTD640 LTD709 LTD Track and Punch SMR Nest Allows a 1.5 reflector to be tracked and positioned into a position, then a light tap with a small hammer on the striker will produce a small accurately located center punch mark. LANYARD PORT BASE MAGNET 3 PLACES A A (3) POINT NEST FOR LOCATING SPHERICALLY MOUNTED RETRO REFLECTOR OFFSET: 2 INCH BODY DIAMETER: 2-1/2 INCHES, KNURLED PUNCH: HARDENED TO ROCKWELL FEATURES: SMR IS ABLE TO ROTATE UP 90 DEGREES SMR IS HELD IN PLACE BY A MAGNET AND/RETAINER IF DESIRED LANYARD PORT IS LOCATED ON SIDE OF THE BODY STRIKER DIAMETER SMR REFERENCE 2.0 +/-.01 MAGNET ALUMINUM BODY BLACK, HARD COAT FINISH PATENT PENDING ( SECTION A ) MAGNET 3 PLACES 45

45 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD840 Hidden Point Bars Typical accessories for Laser Tracker without T-Probe to measure hidden points by a) dynamic sphere measurement => hidden point = sphere centre b) measuring two stationary points Sphere fit tool for Cateye reflector Bar Extension, Length 3.000, Shank Ø "A" / BEX - 1 ONLY NYLON SET SCREW BEX-3 BEX-5 BEX / (2) PLACES TAPPED HOLE / / / Bar Extension, Length 5.000, Shank Ø Bar Extension, Length , Shank Ø Bar Extension, Length 1.000, Shank Ø 6mm Bar Extension, Length 1.000, Shank Ø 8mm Bar Extension, Length 1.000, Shank Ø 10mm Bar Extension, Length 1.000, Shank Ø Bar Extension, Length 1.000, Shank Ø Bar Extension, Length 1.000, Shank Ø L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 46

46 LTD640 LTD709 LTD Reflector Holder 0.5, Hidden Point Bar Adaptor - Assembles with different bar extension lengths and holds an 0.5 reflector on centreline - Steel with black oxide finish NYLON SET SCREW TAPPED 6/32 (2 PLACES) / AIR HOLE MAGNET INSERT.500 DIAMETER SMR (REFERENCE), ON CENTERLINE WITHIN +/ / Hidden Point Bar Holder - For adapting a hidden point or bar extension to a magnetic base for support - Steel with black oxide finish 640 BRASS THUMB SCREW.375 1/2 SLIP FIT FOR HIDDEN POINT BARS AND BAR EXTENSIONS 47

47 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Sphere Fit Adaptor - Adapts onto the end of a bar extension similar to a hard point, and allows the user to locate a conical nest around a construction ball in order to generate a sphere fit routine - Steel with black oxide finish / DIAMETER CONSTRUCTION BALL REFERENCE NOT INCLUDED INTERNAL 6-32 SET SCREW FOR MOUNTING TO BAR EXTENSION Hard Point - Adapts onto the end of a bar extension or hidden point bar, and allows the user to locate scribe lines or surfaces - Hardened to R/C Steel with black oxide finish 640 INTERNAL 6-32 SET SCREW / DIA * FLAT ON END OF POINT L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 48

48 LTD640 LTD709 LTD Tooling Ball Adaptor - Mounts to hidden point bar or bar extension similar to hard point - Connects to a construction ball and allows for 90 rotation SCREW (FOR MOUNTING TO HPB or BEX).500 DIAMETER CONSTRUCTION BALL REFERENCE NOT INCLUDED C/L B-BALL CONCAVE RADIAL NEST THIS SIDE CONICAL NEST THIS SIDE Tooling Ball 0.5, Ball Ø , Shank Ø DIAMETER BALL /

49 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Liner Bushing, Shank Ø 10mm Liner Bushing, Shank Ø 12mm Liner Bushing, Shank Ø Liner Bushing, Shank Ø Adapts standard shank to holes of other diameter - Centring and height tolerance within mm ( ) - Steel with black oxide finish / A Foundation Target Insert - Mounts to concrete floor foundations for permanent targeting reference 640 SLIP FIT REMOVABLE BRASS CAP 7/8".2500 HOLE OPTICAL TARGET (REFERENCE) 1/4" 10/32 X 1" FLAT HEAD SOCKET HEAD CAP SCREW RETAINER AIR HOLE SEALED PLUG TAP MEDIUM KNURL 1-1/4" BRASS 1.0 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 50

50 LTD640 LTD709 LTD Double Vector for TBR, Shank Ø Holds two 0.5 reflectors on centreline and critical offsets to represent the centreline and direction of a hole - Centring and height tolerance within mm ( ) - Steel with black oxide finish DIAMETER SMR REFERENCE 2 PLACES / / DIAMETER SPHERES ON CENTERLINE OF "A" DIAMETER WITHIN + / "A" DIA Degree Adaptor, Offset , Shaft Ø Represents the same centreline and height as a 0.5 tooling ball. - Accepts a hidden point bar assembly - Needed to project a 90 to a point that is obstructed from view - Centring and height tolerance within mm ( ) - Steel with black oxide finish

51 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Sphere Hidden Point Adaptor Accepts a bar extension or other 0.25 Shank - Allows for hidden point or sphere fit routine in 1.5 support that is hidden from view - Height tolerance within mm ( ) - Ball shape to +0.0/ mm ( ) - Steel with black oxide finish TAPPED HOLE (2) PLACES 1.5 SPHERE / STAINLESS STEEL HARDENED TO R/C / NYLON SET SCREW Leica Hidden Point Bar Kit for TBR (USA) consisting of: , , , , , , , , , 4x , , , , , , , 1 lot of Assembly Screws 640 L Leica Hidden Point Bar Kit for TBR (EURO) consisting of: , , , , , , , , , 4x , , , , , , , 1 lot of Assembly Screws 640 L Leica Laser Tracker - Reflector Holder Kit (USA) consisting of: , , , , , , , , , , , , , , 2x , 6x , 1 lot of Assembly Screws 640 L L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 52

52 LTD640 LTD709 LTD Leica Laser Tracker - Reflector Holder Kit (EURO) consisting of: , , , , , , , 2x , 3x , , , , , 1 lot of Assembly Screws 640 L Compensation and Field Check Tools A regular field check plus compensation will keep your system in a perfect condition and will provide a performance to specification Compensation Set for 75mm Reflectors (Cateye), comprising: Precision ball bar, motorized, 2x Magnetic Reflector Support Adapter to ball bar 651 L Compensation Set for 1.5 Red Ring Reflectors (Corner cube), comprising: Precision ball bar, motorized, 2x Magnetic reflector Support, Adapter to ball bar 652 L Precision ball bar, motorized, with counter weight, without reflector support Adapter to ball bar for tripods with 5/8 thread. Allows to mount a ball bar and a magnetic reflector carrier on a tripod, (ball bar and reflector carrier are not included) IFM distance tool To re-determine the birdbath distance for TBR and 1.5 CCR reflectors, 12mm bore holes for reflector supports (supports not included) Tripod adapter To be used for various alignment or compensation measurements. Thread for tripod 5/8. Bore hole 12mm (supports not included) - Tripod reflector holder for consistent reference point

53 Leica Laser Tracker Accessories Catalog LTD640 LTD709 LTD Aluminum tripod AT28, with adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and laser tracker field check equipment. Instrument height from m ( ft), weight 12kg (26.4 lb) Aluminum tripod AT21, with adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and laser tracker field check equipment.. Instrument height from m ( ft), weight 11kg (24.2 lb) Reference tool invar Magnetic Reflector Holder for reflectors in spherical housings, ø 1.5 with bolt hole for Magnetic Reflector Holder, for reflectors in spherical housings, ø 75mm with bolt hole for and Tripod reflector holder for consistent reference point 666 L = Set S = System E = Spare part Std. = Standard delivery Opt. = Option 54

54 LTD640 LTD709 LTD840 Shipping Container and Measuring Cart Both cars and shipping container will provide best stowage and transport facilities no matter where the equipment need to travel to Measurement Cart rack mounting for a fix installation of controllers,ups and high speed computer. This cart can be used like the regular measuring cart and in addition it can be reconfigured to shuttle cart. L =1.20m, W = 0.70m, H = 1.10m Optional upgrade of measuring cart (757937) to use with T-Scan system. The measuring cart have to be upgraded when it will be used with T-Scan system - Ventilator to cool the cart - Cover plate with integrated plugs - Adapter to mount Laser Power Supply Unit T-Scan measuring cart (rack-size) Small 19 rack with wheels, 18 HE height to mount: LTC plus, Cover plate for cable connection, Laser power supply, T-Scan Controller, High speed computer and UPS Shipping container for tracker accessories. For Tracker with LTC base/plus

55 Industrial Theodolites & Total Stations Remote Control System RCS Radio Link & Remote Control Remote Control System Specifications RCS1100 Remote Control Unit Memory Cards and Readers Off-line link via PCMCIA (DCP05 & Axyz-CDM) Accessories, Cables and PC-Interfaces Cables - On-line link to application PC Cables - DL Cables - Remote Control System Power Supplies and Batteries Mains Power Supply Batteries Battery Chargers Optical Accessories for Instrumental Telescope Internal Targets Eyepieces and Filters Autocollimation Accessories North-Finding Gyroscopes Specifications Gyromat Diode Laser DL Specifications DL2 Diode Laser Pointer External Intensity Controller for all Types of Instruments Internal Intensity controller for TDM5005 and TDA5005 only DL2 Compatible Reticules Target Equipment Targets for Multi-Theodolites Systems Reflectors for Total Stations Specifications for Reflectors Retro Reflective Tape Targets Prism Reflectors Corner Cube Reflectors Reflectors Tribrach Aluminum Tripods Wooden Tripods Translation Stages Meteo Station & Accessories

56

57 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Radio Link & Remote Control System RCS Configuration with wireless radio modem and registration via remote control. Applied for - Radio modem for communication range >20m - RFcontrol to allow single operator and record from point of interest Wireless RF Control (EU version) Australia, EU, Czech Republic, Hungary, Malaysia, Mexico, New Zealand, Norway, Philippines, Poland, Russia, Switzerland, Thailand (Radio Frequency: 40Mhz, Plugs into a USB port on a Windows computer. Incl. CD with drivers and templates for Axyz, Metrolog XG and emscon Wireless RF Control (US version) US, Brazil, Canada, Israel (Radio Frequency: 49Mhz, Plugs into a USB port on a Windows computer)incl. CD with drivers and templates for Axyz, Metrolog XG and emscon. Std. = Standard delivery Opt. = Option 58

58 Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA TCPS26B base radio modem, with antenna, software diskette and carrier for instrument TCPS26R remote radio modem, with antenna, software diskette and carrier for PC (RS232) Transport container for TCPS26 radio modem Configuration with control unit with 1:1 instrument user interface Truly single-operator system Fits to TDA5005 with onboard software (i.e. offline mode) Applied for - Measurement control from point of interest - Large part inspection & assembly RCS1100 Standard Set comprising: RCS1100 controller with radio module/antenna, holder, soft bag, user manual, 1 TCPS26B base radio modem, 1 short Y- cable, 1 Lemo 0 - RS232 adapter. Not included: external battery GEB70/71 for TCPS26B, battery GEB111 with charger GKL111 59

59 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA RCS1100 Advanced Set comprising: RCS1100 controller with radio module/antenna, holder, user manual, 1 TCPS26B base radio modem, 1 short Y-cable, 1 Lemo 0 - RS232 adapter, 1 GEB 111 battery, 1 GKL 111 charger, 2 Antenna holder, 1 cont Not included: external battery GEB70/71 for TCPS26B Specifications RCS1100 Remore Control Unit Verify with Leica Geosystems Metrology if RCS1100 is approved in your country Method Transmission Frequency spectrum High frequency power (ERP) via integrated Radio Modem MHz adjustable by manufacturer 100 mw Dimensions & Weight Weight w/o battery 0.77 kg Ambient Conditions Operating range Operating temperature Storage temperature Dust/Water (IEC 60529) Humidity up to 600 m (2 000 ft) under average conditions -20 C to + 50 C (-4 F to 122 F) -40 C to + 70 C (-40 F to 158 F) IP %, non condensing Std. = Standard delivery Opt. = Option 60

60 Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Memory Cards and Readers Off-line link via PCMCIA card (DCP05 & Axyz-CDM) PCMCIA SRAM memory card, 512 KB (approx. 4,500 data blocks) PCMCIA SRAM memory card, 2 MB (approx. 18,000 data blocks) MCR6 USB card reader As an alternative, the operator may also transfer data via serial interface using LGO Tools 61

61 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Accessories, Cables and PC Interfaces Cables On-line link to application PC Configuration for single instrument, powered with internal battery Data cable GEV189, 2m, connects instrument with USB for serial communication (incl. USB electronics); PC driver and user manual included on CD Data transfer cable GEV102, 2m, connects instrument and RS232 interface Data transfer cable 10m, connects instrument and RS232 interface Configuration for single instrument, powered with external battery/mains Std. = Standard delivery Opt. = Option 62

62 Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA Y-cable GEV58, long, (Lemo 0, Lemo 0, Lemo 1) connects instrument with external power supply T_LINK/GEV208 or battery GEB70/171 and PC (requires additional connector ) or radio link TCPS26B Lemo 0 - RS232 adapter (9pin female) for and Configuration for multiple instrument, powered with mains Data cable GEV86, 20 m, connects instrument with external power supply T-LINK/GEV208 or battery GEB70/ Data cable GEV52, 1.8m, connects instrument or intensity regulator DL2 with external power supply T-LINK/GEV208 or battery GEB70/ Moxa C104 H/PCI, 4xRS232, for Desktop PC's (for up to 4 instruments online), including RS232 9F gender changer Cable spool for 20m/40m cables Cables - DL Cable, 1m,connects DL2 and intensity regulator Cable GEV63, 1.2m, connects instrument with DL2 intensity regulator 63

63 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Cables - Remote Control System Y-cable GEV58, long, (Lemo 0, Lemo 0, Lemo 1) connects instrument with external power supply T_LINK/GEV208 or battery GEB70/171 and PC (requires additional connector ) or radio link TCPS26B Y-cable GEV137, short, (Lemo 0, Lemo 0, Lemo 1) connects instrument with external power supply T_LINK/GEV208 or battery GEB70/171 and PC (requires additional connector ) or radio link TCPS26B Lemo 0 RS232 adapter (9pin female) for and Std. = Standard delivery Opt. = Option 64

64 Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Power Supplies and Batteries Power Supply Units Interface T_LINK (max. total 8 instruments) Power supply unit for TPS, for indoor use only. Input VAC to output 12VDC opt GEV208, Power supply unit for TPS/GPS, for indoor use only; input VAC to output 12VDC, with connection for power cables Batteries Camcorder battery GEB121, nickel-metal-hydride (Ni-MH), 6V/4.2Ah (for RCS1100) Internal battery GEB187, plug-in, nickel-metal-hydride, (Ni-MH), 1.8Ah Small external battery GEB70, 12V 2Ah NiCd, rechargeable External battery GEB171, 12V 8Ah, Ni-MH, rechargeable Battery Chargers Charger GKL22, 230V, 50/60Hz, Euro-type plug, charges one battery GEB87, GEB187 or GEB70, normal charge 14 hours Simple charger GKL22-1, same as GKL22 but with 115 V, 50/60 Hz, and US -type plug GKL112, Charger BASIC, for Ni-MH batteries GEB121 and GEB111, car adapter cable and net adapter included GKL221, Charger PRO. To be used with up to two charging adapters GDI221 or GDI222, Charger cable and net adapter included 65

65 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA GDI222, Adapter for GKL221 for charging Ni-MH batteries of type GEB121, GEB111,, charger cable included for GEB87, GEB187, GEB77, GEB79, GEB70, GEB71, GEB171 or adapter plate GDI121. Optical Accesories for Instrumental Telescope Internal Targets Internal target GUS29 for collimation measurements; factory fit to T3000(A) and TM5100A Eyepieces & Filters Eyepiece FOK53, 44x magnification at 10m / 30ft (fitted in service-shop) GVO13 objective sun-filter GFZ3 Diagonal eyepiece for telescope, except T Eyepiece GOK6 for steep sights up to 72, rotatable in vertical plane Counterweight for TM5100(A) and T3000(A) if steep angle eyepiece GOK6 is attached GDV3 short range lens for retro targets in container (only replacement, as included in standard delivery of TPS5000 total stations, a re-issue of the certificate M distances is necessary with any new additional lens!) std. std AP31 aperture (diam = 31mm) for use with TDM/TDA5005 and CCR 1.5 ( ) std. Std. = Standard delivery Opt. = Option 66

66 Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Autocollimation Accessories Autocollimation eyepiece Plug-in lamp, with cable to battery Battery box GEB63 for autocollimation eyepiece, without 9V battery AL51 plug-in lamp for TM5100A only Autocollimation mirror GAS1, ø 50mm, in case 67

67 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories North Finding Gyroscopes Fully automatic precision surveying gyroscope for north finding measurements Applied for - Precision directional measurements, where GPS is inaccessible e.g. - Naval shipbuilding - Tunnelling - Please ask for separate information on Gyromat 2000 by DMT/Germany Specifications Gyromat 2000 by DMT/Germany Accuracy Measuring mode Measuring accuracy 3 (1 mgon) 16 (5 mgon) 32 (10 mgon) Measuring time (apx.) 10 min. 5 min. 2 min. No. of measurements Ambient Conditions Operating range Operating temperature up to 80 latitude -20 C to + 50 C (-4 F to 122 F) Dimensions & Weight Weight w/o instrument Height w/o instrument Tripod 11 kg 215 mm 8 kg mm Std. = Standard delivery Opt. = Option 68

68 Article No. Description Industrial Theodolites & Total Stations Accessories Diode Laser DL2 Visualizes the line-of-sight by truly non contact means Applied for - Marking points - Digitizing - Setting-out points by design values - Positioning and alignment - Locating reflectors in remote control mode Configuration for DL2 & instrument power supply via external battery Configuration for DL2 & instrument power supply via interface T_LINK 69

69 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA Diode Laser Eyepiece DL2 with manual, in case Specifications DL2 Diode Laser Pointer Ambient Conditions Operating temperature Storage temperature Humidity -10 C to + 35 C (-14 F to 95 F) -40 C to + 60 C (-40 F to 140 F) 0-95%, non condensing Optic specifications Power output at objective Safety Class 2 Laser Products Eye protection Range on daylight Range in darkness Laser source Wavelength < 1 mw Class 2 Laser Product in accordance with: IEC ( ): Safety of Laser Products resp. EN : A11: A2: 2001 Safety of Laser Products Do not stare into the beam or direct it unnecessarily at other persons Integral laser retaining film on beam splitter about 140 m (460 ft) about 400 m (1 300 ft) Laser Diode 635 mm Dimensions Laser eyepiece with housing Intensity regulator Tilt angle of telescope 38 x 58 x 25 mm 98 x 65 x 58 mm depending on instrument type (varies with position of DL2) Weight DL2 Intensity regulator 0.07 kg 0.27 kg Laser Radiation Do not stare into beam Class 2 Laser Product according to IEC Pο 0.95 mw λ = nm Counterweight for TM5100(A) and T3000(A) if diode laser DL2/3 is attached Std. = Standard delivery Opt. = Option 70

70 Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 External Intensity Controller for all Types of Instruments Intensity regulator Cable, 1m, connects DL2 and intensity regulator Cable GEV63, 1.2m, connects instrument with DL2 intensity regulator Tripod bracket in order to attach accessories (battery, DL2 intensity regulator, Radio Modem) to AT21/28 tripods Data cable GEV52, 1.8m, connects instrument or intensity regulator DL2 with external power supply T-LINK/GEV208 or battery GEB70/ Data cable GEV86, 20 m, connects instrument with external power supply T-LINK/GEV208 or battery GEB70/171 Internal intensity controller for TDM5005 and TDA5005 only Conversion kit DL2 comprising: DM cover (IMS grey) with cable socket and indicating diode, adapter cable between DM - cover and DL2; factory fitted DL2 Compatible Reticules Reticule GSTP2 for T2002, TPS100 old, TPS1000, TPS5000 with central opening. Retro fit to TM/TDM/5000, TM/TDM/TDA

71 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA Industrial reticule GSTP24 with concentric circles and central opening for DL2/3; retro fit to T/TC2002, TM/TDM5000 std. std Industrial reticule GSTP25 std. with concentric circles and central opening for DL2/3; retro fit to T3000(A) Std. = Standard delivery Opt. = Option 72

72 Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Target Equipment Targets for Multi-Theodolites Systems Scale bar 0,9m, carbon fibre, incl. Producer Inspection Certificate, in carrying case Orientation Target (magnetic) Self-adhesive target foils, black/white, ø 23mm, 48 pieces on one sheet Magnetic corner target, ø 30mm, 10mm high Note: By sting a ring shaped target (e.g ) onto this target, it makes a total station target 73

73 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories Reflectors for Total Stations 1) Retro-reflective tape targets for industrial applications 2) Prism reflectors for typical survey applications 3) Corner Cube Reflector for precision measurements 4) 360 Reflector for tracking applications Specifications for Reflectors Type Add. Accept. Typ. Typ. Constant Angle Accur. Range Corner Cube Reflector CCR mm 1) Hz ± mm 2) <600 m (2 000 ft) V ± mm 4) Tape Targets 20 x 20 mm 34.4 mm 1) ± mm 2) <60 m (200 ft) 40 x 40 mm 34.4 mm 1) ± mm 2) m ( ft) 60 x 60 mm 34.4 mm 1) ± mm 2) m ( ft) Surveying Prisms Prec. Prism GPH1P 0 mm ± mm 2) <2 500 m (8 200 ft) Miniprism GMP mm ± mm <1 000 m (3 300 ft) 360 Prisms GRZ mm Hz mm 4) <1 300 m (4 300 ft) V ± 27 Miniprism GRZ mm Hz mm 4) <500 m (1 650 ft) V ± 27 1) Each TDM5005 and TDA5005 comes with Producer Inspection Certificate (in accordance with ISO17123), that states the individual offset. 2) 1 sigma distance measuring accuracy (in accordance with ISO17123). 3) Under average conditions with a single reflector in manual measurement mode. 4) Point accuracy (1 sigma) Std. = Standard delivery Opt. = Option 74

74 Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 1) Retro Reflective Tape Targets Inexpensive tape targets available in different design and size Applied for - Standard applications - Manual measurements Hidden point bar 0.5m, with tape targets Magnetic support for hidden point bar, 0.5m Retro targets, 20x20mm, 20 pieces, self-adhesive (avg. range 2-60m) Retro targets, 40x40mm, 20 pieces, self-adhesive (avg. range m) Retro targets, 60x60mm, 20 pieces, self-adhesive (avg. range m) Ring shaped retro target, 100 pieces, ø central aperture = 5mm, ø outside = 26mm, light orange, self-adhesive (avg. range up to 50m) Target-kit with retro-target on magnetic target, in case, comprising: 20 ring-shaped retro-target, central aperture ø 5mm, outside ø 26mm ( ), 20x retro-target, 20x20mm ( ) 20x retro-target, 40x40mm ( ), 4x RB bases ( ), 1x RBC base ( ), 4x RT3-90 targets ( ), 4x RT3-45 targets ( ), 4x RT3-0 targets ( ) Pass point-retro target set, in case, comprising: 3 swivel targets with retro reflective foils, ø45mm, h=75mm, 3 magnetic bases 75

75 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA Roller Alignment target fixture, comprising 2 pcs. Floor fixtures 1 pce. Roller fixture 2 pcs. RT3-90 targets ( ), 2 pcs. RT3-45 targets ( ), excl. CCR1.5 reflector ( ) and CCR1.5 supports (576076) Retro target, magnetic, 10 pcs., format 40x40x1mm, (20-120m) RT3-90, Tape target with offset 30mm ± 0.05mm, magnetic. Fits to target base RB and RBC RT3-45, Tape target with offset 30mm ±0.05mm, magnetic, fits to target RB and RBC RT3-0, Tape target with offset 30mm ±0.05mm, magnetic, fits to target base RB and RBC RB, Magnetic target base with offset 10mm ±0.05mm, magnetic, fits to tape targets RT3 Std. = Standard delivery Opt. = Option 76

76 Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA RBC, Magnetic target base with offset 10mm ±0.05mm, fits to tape targets RT3, with central bolt hole and locating pin 77

77 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 2) Prism Reflectors Glass prism targets for surveying applications Available in different size and centring accuracy Applied for - Standard applications with fixed target locations - Automatic measurements - Surveying applications For a wider range of prism supports, please ask your Leica representative or download Catalogue from downloads/areas/zz/construction/accessories/index.htm Circular prism GPR1 (avg. range up to 2,500m) Single prism holder GPH1 for GPR Mini-prism set GMP101 (avg. range up to 1,000m) Set with bubble, spike and bag Single prism precision reflector GPH1P (avg. range up to 2500m) Std. = Standard delivery Opt. = Option 78

78 Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 3) Corner Cube Reflectors Air path corner cube in black (swoxed) spherical housing Replacement program for broken reflectors available Applied for - Precision measurements - Automatic measurements - Fully compatible with Leica Laser Tracker Reflector CCR 1.5, swoxed (avg. range up to 600m) For wide range of supports, please consult Laser Tracker section 4) 360 Reflectors Glass prism targets for surveying applications Available in different size and centring accuracy Applied for - Automatic tracking measurements in Step-and-Go mode For a wider range of prism supports, please ask your Leica representative or download Catalogue from downloads/areas/zz/construction/accessories/index.htm prism reflector GZR121 (avg. range up to 1,300m) for typical use with TDA5005 in tracking mode with low accuracy requirements Tribrach GDF21-I, industrial tribrach, without optical plummet, light grey GDF22-I, industrial tribrach with optical, plummet, light grey 79

79 Article No. Description Leica Industrial Theodolites & Total Stations Catalog Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Aluminum Tripods Aluminum tripod AT21, with adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and laser tracker field check equipment.. Instrument height from m ( ft), weight 11kg (24.2 lb) Aluminum tripod AT28, with adjustable centre column. Robust, well-established tripod for general use and 5/8 thread. Suitable for Total Stations, Theodolites and laser tracker field check equipment. Instrument height from m ( ft), weight 12kg (26.4 lb) Tripod bracket in order to attach accessories (battery, DL2 intensity regulator, Radio Modem) to AT21/28 tripods. Wooden Tripods Tripod GST20, telescopic, with accessories. Robust, well-established tripod for general use. Suitable for levels, lasers, Total Stations and GPS. Extendible 180cm (5.9ft), weight 6.4kg (14.1lb) Tripod base GST4, for setting up GST tripods on smooth surfaces Std. = Standard delivery Opt. = Option 80

80 Article No. Description Industrial Theodolites & Total Stations Accessories TM5100A TDM5005 TDA5005 Translation Stages Precision translation stage to shift instrument along axis Applied to - Alignment to references - Alignment of instruments and/or targets 1st GMT5 shifts in single direction; a 2nd translation stage is required for orthogonal shifts Measuring slide GMT5 (single direction) with maximum working range 40mm; least count 0.01mm GAD12 Adapter set for mounting GMT5 translation stage onto any Leica tribrach; includes tribrach to mount instrument; typical adapter set for theodolites and total stations GAD13 Adapter set for mounting GMT5 translation stage onto 5/8 thread; includes adapter plate with 5/8 thread to mount instruments; typical adapter set for levels. Meteo Stations & Accessories The most precise sensor to monitor and correct the atmospheric conditions. It is an essential accessory for any precision measurements Set Meteo Station HM30 with integrated pressure sensor, comprising: Meteo Station HM30, RS232 cable, 9pole female, 1.5m. Combo-sensor for humidity/temperature with cable 3m. Power supply VAC/9VD/1150mA with universal plugs for Europe, UK, USA/Japan For wide range of accessories, please consult Laser Tracker section 81

81 Whether building the fastest car, the biggest plane, or the most precise tooling, you need exact measurements to improve quality and productivity. So when it has to be right, professionals trust Leica Geosystems Metrology to help collect, analyze, and present 3-dimensional (3D) data for industrial measurement. Leica Geosystems Metrology is best known for its broad array of control and industrial measurement products including laser trackers, Local Positioning Technology (LPT) based systems, hand-held scanners, 3D software and high-precision total stations. Those who use Leica Metrology products every day trust them for their dependability, the value they deliver, and the world-class service & support that's second to none. Precision, reliability and service from Leica Geosystems Metrology. When it has to be right Copyright Leica Geosystems AG, Unterentfelden, Switzerland Printed in Switzerland. Leica Geosystems AG Moenchmattweg 5 CH-5035 Unterentfelden Switzerland Phone [email protected] - when it has to be right

82 A technological company - Instop, S.L.U. es desde el año 1997 el proveedor de soluciones globales en el campo de la topografía para todos los profesionales de nuestro país - es el primer portal en la red y la mas completa pagina web dedicada al mundo de la topografía y la construcción - Somos una empresa dinámica dedicada al servicio personalizado al cliente - Instop es el distribuidor mas importante de Leica Geosystems en nuestro país. - Somos la primera empresa del sector en alquiler de maquinaria para topografía. INSTOP S.L.U. C/ Narcís Monturiol, 14 Pol. Ind. Plans d Arau La Pobla de Claramunt - Barcelona Tel Fax