TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 1 of 12

Transcription

1 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 1 of 12 YAYGAN SARACIYE KIRTASIYE VE OYUNCAK AÜLLERI SAN TIC LTD ŞTI İSTOÇ 16 ADA ASLAN PLAZA KAT BAĞCıLAR İSTANBUL TEL: FAX: To the attention of Ismail Yaygan & urat Demirkan The following sample(s) was (were) submitted and identified by/on behalf of the client as: Sample No. A B C D Sample Description Angel Cat Sugar School Collection Fabric sample (Angel Cat Sugar School Collection) mesh sample (Angel Cat Sugar School Collection) Lining sample (Angel Cat Sugar School Collection) Client s reference No. : TR Buyer : Hardline Order No. : Not Provided Division : Stationery odel/style No. : Article No. : Not Provided Age Grade : +3 Age Group applied : +3 anufacturer : Not Provided Country of Origin : Not Provided Country of Destination : Not Provided Shipment Date : Not Provided Fiber Composition : Not Provided Fabric Weight : Not Provided End Use : Not Provided Sample Receiving Date : 24 June 2014 Test Performing Period : 24 June 2014 ~ 27 June 2014 Submitted Care Label Instructions : : Not Provided Overall Conclusion : PASS Test Results : Please refer to the next page(s). Performed Test Summary: Selected test(s) as requested by client against Client s performance standard.

2 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 2 of 12 Test Parameters Physical tests EN 71 Part 1:2011+A3:2014-echanical and Physical Test EN 71 Part 2:2011-Flammability of Toys Test Parameters Chemical tests Azo Dyes (Synthetic & Blend Fibers) Allergenous Disperse Dyes Toxicity Carcinogenic Dyes Phthalates Result A Result B1 + C1 + D1

3 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 3 of 12 Remarks : = eets client s requirement F = Below client s requirement I = Inconclusive * = No specified requirement Notes: Conclusions on meet/fail are based on the test result from the actual sampling of the received sample(s). Residual sample can be returned to client if requested. The test results relate to the tested items only. Test reports without SGS seal and authorized signatures are invalid. Reported results do not include uncertainties. In this Test Report tests marked (1) are included in the IAS Accreditation Scope of this Laboratory. Opinions and interpretations expressed herein are outside the scope of IAS Accreditation. IN THIS REVISED-1 REPORT, AZO DYES, ALLERGENOUS DISPERSE DYES, TOXICITY, CARCINOGENIC DYES, PHTHALATES TEST RESULTS FOR COPONENTS B1&C1&D1 WHICH REPORTED UNDER REPORT #TR DATED JANUARY 23, 2014 WERE ADDED BY THE REQUEST OF THE APPLICANT. THIS REPORT SUPERSEDES OUR REPORT NO: DATED Issued in Istanbul Signed for and on behalf of Servisleri A.Ş. Eylem Yaldızlı Customer Services Supervisor Fatih Çakır yetkilimüdür RSTS anager

4 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 4 of 12 Component List / List of aterials for Chemical Test Sample No. Sample Description aterial No. Component aterial Colour Fiber Type* B Fabric sample B1 Coated fabric main Textile/coating Pink Type C C esh sample C1 esh main Textile Dark Pink Type C D Lining sample D1 Lining main Textile/coating Dark Pink Type C *This fiber type identification is for the selection of azo dye testing procedure(i.e. EN /3:2012) Note: Type A=Textile contains natural fibers only and/or regenerated fibers exclude the group of acetate. Type B=Textile contains polyester fibers only Type C=Textile contains man-made fibers and/or man-made blended fibers(except polyester fibers) N/A:Not Applicable

5 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 5 of 12 Azo Dyes (Synthetic & Blend Fibers)¹ Test ethod: According to BS EN : Analysis by GC-S/HPLC-DAD Component Cas No B1 + C1 + D1 4-Aminobiphenyl Benzidine Chlor-o-toluidine Naphthylamine o-aminoazotoluene nitro-o-toluidine / 2-Amino-4-nitrotoluene Chloroaniline methoxy-m-phenylenediamine / 2,4-Diaminoanisole ,4'-Diaminodiphenylmethane ,3'-Dichlorobenzidine ,3'-Dimethoxybenzidine ,3'-Dimethylbenzidine ,4'-methylenedi-o-toluidine / 3,3'-Dimethyl-4,4'-diaminodiphenylmethane p-cresidine ,4'-ethylene-bis-(2-chloroaniline) ,4'-Oxydianiline ,4'-Thiodianiline o-toluidine methyl-m-phenylenediamine / 2,4- Toluendiamine ,4,5-Trimethylaniline aminoazobenzene O-Anisidine Conclusion Pass Note(s): = not detected * = exceed the limit Detection Limit = 5 mg/kg (for individual compound) Requirement by the client= 30 mg/kg

6 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 6 of 12 Remark:. ax. limit specified by Entry 43 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 2002/61/EC). Whenever 4-aminodiphenyl (CAS number ), 2-naphylamine (CAS number ) and 4-methoxy-m-phenylene-diamine (CAS number ) is found, the use of banned azo colorants cannot be reliably ascertained without additional information, e.g. the chemical structure of the colorants used. In case polyurethane materials are used, e.g. PU foams and coatings and in prints, it cannot be ruled out that certain amines, e.g. 4,4 -methylene-dianiline (DA, CAS number ) and 2,4-toluylen-diamine (TDA, CAS number ) are released from the PU component and not from a banned azo colorant. In case of pigment prints care has to be taken that 4,4 -methylene-dianiline (DA, CAS number ) is not released from a source of banned azo colorants but from e.g. a chemical fixing agent.

7 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 7 of 12 Allergenous Disperse Dyes¹ Test ethod: With reference to DIN 54231:2005 Analysis by LC-DAD Component Cas No B1 + C1 + D1 C.I. Disperse Blue 1(Structure No: C.I ) C.I. Disperse Blue 3 (Structure No: C.I ) C.I. Disperse Blue 7 (Structure No: C.I ) C.I. Disperse Blue 26 (Structure No: C.I ) C.I. Disperse Blue C.I. Disperse Blue C.I. Disperse Blue C.I. Disperse Blue C.I. Disperse Brown C.I. Disperse Orange 1 (Structure No: C.I ) C.I. Disperse Orange 3 (Structure No: C.I ) C.I. Disperse Orange 37/ C.I. Disperse Red 1 (Structure No: C.I ) C.I. Disperse Red 11 (Structure No: C.I ) C.I. Disperse Red 17 (Structure No: C.I ) C.I. Disperse Yellow 1 (Structure No: C.I ) C.I. Disperse Yellow 3 (Structure No: C.I ) C.I. Disperse Yellow 9 (Structure No: C.I ) C.I. Disperse Yellow C.I. Disperse Yellow C.I. Disperse Yellow C.I. Disperse Orange Conclusion Pass Note(s): Results reported on sample extract only. The unit of result is mg/kg. Requirement by the client= = Detection Limit = not detected * = exceed the limit < = less than 15 mg/kg (for individual compound) Not Detected

8 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 8 of 12 Toxicity Test ethod: Component Antimony (Sb) Arsenic (As) Cadmium (Cd) Chromium (Cr) Lead (Pb) ercury (Hg) Barium (Ba) Selenium (Se) Note(s): Conclusion With reference to BS EN 71-3:1995 BS : Analysed by ICP-OES B1 + C1 + D1 Pass Detection Limit = = not detected * = exceed the limit < = less than Sb: 5 mg/kg, As: 2,5 mg/kg, Ba: 10 mg/kg, Cd: 5 mg/kg, Cr: 5 mg/kg, Pb: 5 mg/kg, Hg: 5 mg/kg, Se: 10 mg/kg Requirement by the client= Antimony (Sb) 60 mg/kg Arsenic (As) 25 mg/kg Barium(Ba) 1000 mg/kg Cadmium (Cd) 75 mg/kg Chromium(Cr) 60 mg/kg Lead(Pb) 90 mg/kg ercury (Hg) 60 mg/kg Selenium (Se) 500 mg/kg

9 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 9 of 12 Carcinogenic Dyes¹ Test ethod: With reference to DIN 54231:2005 Analysis by LC-DAD Component Cas No B1 + C1 + D1 C.I. Acid Red 26 (Structure No: C.I ) C.I. Basic Red 9 (Structure No: C.I ) C.I. Direct Black 38 (Structure No: C.I ) C.I. Direct Blue 6 (Structure No: C.I ) C.I. Direct Red 28 (Structure No: C.I ) C.I. Basic Violet 14 (Structure No: C.I ) C.I. Disperse Orange 11 (Structure No: C.I ) C.I. Disperse Blue 1 (Structure No: C.I ) C.I. Disperse Yellow 3 (Structure No: C.I ) Conclusion Pass Note(s): Results reported on sample extract only. The unit of result is mg/kg. Requirement by the client= = not detected * = exceed the limit < = less than Detection Limit = 15 mg/kg (for individual compound) Not Detected

10 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 10 of 12 Phthalates¹ Test ethod: With reference to EN 14372: Analysis by GC-S Component Cas No B1 + C1 + D1 Dibutyl Phthalate (DBP) Benzylbutyl Phthalate (BBP) Bis-(2-ethylhexyl) Phthalate (DEHP) Total (DBP+BBP+DEHP) Conclusion Pass Diisononyl Phthalate (DINP) Di-n-octyl Phthalate (DNOP) Diisodecyl Phthalate (DIDP) Total (DINP+DNOP+DIDP) Conclusion Pass Note(s): Recommended ax. Limit= = Detection Limit = not detected * = exceed the limit < = less than For DBP, BBP, DEHP and DNOP: 0,003%, For DINP, DIDP: 0,01% (for individual compound) 0,1 % for Total (DBP+BBP+DEHP) For all childcare articles 0,1 % for Total (DINP+DNOP+DIDP) For childcare articles if it can be placed in the mouth Remark: Recommended ax. limit specified by entries 51 and 52 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 2005/84/EC).

11 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 11 of 12 European Standard on Safety of Toys*# -echanical and Physical Properties 1 AS SPECIFIED IN EUROPEAN STANDARD ON SAFETY OF TOYS EN 71 PART 1:2011+A3:2014 CLAUSE DESCRIPTION RESULT 4 General requirements A 4.1 aterial(by visual assessment) Pass 4.7 Edges Pass 4.8 Points and metallic wires Pass Flammability of toys 1 AS SPECIFIED IN EUROPEAN STANDARD ON SAFETY OF TOYS EN71 PART 2:2011 CLAUSE DESCRIPTION RESULT 4.1 General requirements Pass *Only applicable clauses were reported. # Although the sample is not a toy, it was tested according to European Standard on Safety of Toys by the request of the applicant

12 TEST REPORT Job No./Report No TR R1 Date:9 July 2014 Page 12 of 12 * * * End of Test Report * * *