TEST REPORT Page 1 of 6

Transcription

1 TEST REPORT Page 1 of 6 REPORT NUMBER : APPLICANT NAME ADDRESS SAMPLE DESCRIPTION : Sample 1 Sample 2 Sample 3 Sample 4 Sample 5 TURR Cihan Metal End. ve Tic. A.Ş. Atatürk Mah. Fevzi Çakmak Cad. No:215 Şekerpınar Gebze Kocaeli TÜRKĐYE FAX NO : Attention :Emel Tokgöz (emel.tokgoz@gmail.com) One sample of AA 8006 Aluminium folio One sample of AA 1050 Aluminium folio One sample of AA 8006F Aluminium folio One sample of Cable folio One sample of Foil pipe DATE IN : 31 January, 2011 DATE OUT : 07 February, 2011 REQUEST : SVHC Testing regarding REACH Regulation (EC) No. 1907/2006 for updated SVHC List of 15 th December 2010 The test results relate only to the items tested. The whole and/or the part of this test report shall not be reproduced and shall not be shared with third parties, nor to be used for PR activities without the written permission of INTERTEK Test Hizmetleri A.S The reported uncertainity is based on a standard uncertainity multiplied by a coverage factor k=2, providing a level of confidence of approximately 95%. The uncertainity evaluation has been carried out in accordance with ISO/IEC and UKAS accreditation requirements. Unless otherwise is specified, all Pass or Fail results are given without uncertainity considered. When uncertainity is taken into account, the result may be borderline. Borderline results need to be re-tested to determine their disposition up to customer s decision. Opinions and interpretations expressed herein are outside the scope of UKAS accreditation. Tests marked (*) in this test report are not included in the UKAS accreditation schedule for this laboratory. Zeynep Akın Assistant Chemical Laboratory Manager Neslihan Sözer Chemical Laboratory Manager * * ssenturk

2 R E S U L T S Page 2 of 6 Samples: Sample 1 Sample 2 Sample 3 Sample 4 Sample 5 Weight : 16,75 g Weight : 17,55 g Weight : 14,03 g Weight : 28,5 g Weight : 14,55 g Tested Component Parts: CS=Combined Sample CS I Description CS I Combined sample of AA 8006 Aluminium folio, AA 1050 Aluminium folio, AA 8006F Aluminium folio, Cable folio, Foil pipe

3 R E S U L T S Page 3 of 6 1. Heavy metals after total digestion in % Test method: ICP OES DIN EN ISO (E22) Plastic and metal: two stage digestion: cont. HNO 3 + H 2O 2, inverse aqua regia solution Plastic: microwave digestion (HNO 3) Metal: aqua regia solution: US EPA 3052 Detection Limit: 0.01% Parameter Lead (Pb) Cobalt (Co) Arsenic (As) Chromium (Cr) CS I Referring to the listed SVHCs the following concentrations results: Substances CAS-No. Calculated concentration of CS I (assuming the worst-case) Cobalt dichloride <0.1% Diarsenic pentaoxide <0.1% Diarsenic trioxide <0.1% Lead hydrogen arsenate <0.1% Triethyl arsenate <0.1% Cobalt(II) sulphate <0.1% Cobalt(II) dinitrate <0.1% Cobalt(II) carbonate <0.1% Cobalt(II) diacetate <0.1% Chromium trioxide <0.1% Acids generated from chromium trioxide and their oligomers: Chromic acid <0.1% Dichromic acid <0.1% Calculated for the whole product the detected amount in % is: -- --

4 R E S U L T S Page 4 of 6 2. Chromium VI in % Test method: Plastic and composite material: alkaline extraction according to IEC 62321:2008 Textile: Extraction with acid sweat solution according to BS EN ISO 105-E04:1996, detection by ICP OES Leather: BS EN ISO 17075:2007 with UV-VIS Detection Metal: boiling water extraction according to IEC 62321:2008 Detection Limit: 0.001% Parameter Chromium VI CS I By this test the presence resp. a concentration greater than 0.1% of below substances can be excluded. Substances CAS-No. Calculated concentration of CS I (assuming the worst-case) Sodium dichromate <0.1% Lead chromate <0.1% I. Pigment Red <0.1% C.I. Pigment Yellow <0.1% Potassium dichromate <0.1% Ammonium dichromate <0.1% Potassium chromate <0.1% Sodium chromate <0.1%

5 R E S U L T S Page 5 of 6 3. Organic substances, in % Test Equipment : GC-MS / HPLC / GC-ECD Detection Limit : 0.02%; Anthracene: % Substance CAS-No. C S I Anthracene ,4'- Diaminodiphenylmethane Dibutylphthalate (DBP) tert-butyl-2,4,6-trinitro-m-xylene (musk xylene) Bis(2-ethylhexyl)phthalate (DEHP) Hexabromocyclododecane (HBCDD) Short chain chloroparaffins C 10-C Tributyl tin oxide Benzylbutylphthalate (BBP) ,4-Dinitrotoluene Diisobutylphthalate Tris(2-chloroethyl)phosphate Acrylamide Trichloroethylene Methoxyethanol Ethoxyethanol Referring to the sample, no test for the organic substances are necessary Anthracene oils and anthracene pastes (Analytically determined via the concentration of anthracene) Coal tar (Analytically determined via the concentration of the sum of the 12 polycyclic aromatic hydrocarbons) Referring to the sample, no test for the organic substances are necessary Referring to the sample, no test for the organic substances are necessary Calculated for the whole product the detected amount in % is: -- --

6 R E S U L T S Page 6 of 6 4. Ceramic fibers Substances CAS-No. CS I Aluminosilicate -- Zirconia aluminosilicate Boron Compound Substances CAS-No. CS I Boric Acid Disodium Tetraborate, anhydrous Tetraboron Disodium Heptaoxide, hydrate ## END OF TEST REPORT ##