Pellematic Smart_e 0.6

Transcription

1 Pellematic Smart_e 0.6 Electricity and heat for single family homes

2 PE Smart_e 0.6 Proven pellet heating technology combined with state of the art Stirling technology The Pellematic Smart_e is realizing a long-awaited vision: The possibility to supply your own house with electricity and heat out of wood pellets. The electricity producing pellet heating system provides, as usually, heat for domestic hot water and heating for the home. Plus the extra of green electricity which is available because of the integrated Stirling engine. The Pellematic Smart_e incorporates a Microgen Stirling engine for generating electricity. The CHP was specifically designed for the low power sector with the aim to meet the needs of single family homes. The Stirling engine converts the heat of the wood pellets into kinetic energy. The hermetically capsulated Stirling system is generating directly alternating current (230 V, 50 Hz) which is available for the use in the house or for feeding into the public power grid. One system for BOTH heat and electricity Generating electricity at home High on-site consumption Stirling engine electricity warmth wood pellet heation There is no need for an additional device to generate your own electricity. The Pellematic Smart_e requires only 1.5 m² space and includes all necessary parts of a pellet heating system with condensing technology integrating them in a buffer tank. The dream of generating own electricity without the loss of power of a conventional power plant and the public grid comes true. The pellet cogeneration system takes you one step closer to energy independence. A thermal power of 9 kw allows the systems a constantly electricity output even outside the heating period. The low thermal power combined with the electritiy output increases the self-consumption rate to 70 to 90 per cent.

3 Nominal power 9 kw thermal 600 W electrical Peak load 13 kw thermal 600 W electrical SHORT reaction time Easy to control RetrofittABLE Watt 600 Due to optimally coordinated materials the Stirling engine has a very short reaction time and is able to provide the maximum power in a short time. This results in more power output and a higher efficiency of the system. The Pellematic Smart_e is easy to handle: the clear and illuminated graphic display with icons and clear text allows control by finger pressure. Additionally in-house electricity consumption can be displayed. It is possible to buy the boiler now and retrofit the Stirling module later. The Pellematic Smart is a conventional pellet heating system without a Stirling engine. Upgrading the system to a CHP is possible with little effort.

4 Systematic storage Flexilo fabric tanks Simple and quick installation Clean and space saving storage Dust-tight, permeable to air and permanently anti-static Suitable for damp enclosed room Can be installed outside if protected from rain and UV light Even suitable for low headroom Available in 35 sizes from 450 kg to 12 tonnes Scan QR-Code & watch video! Individual storage solution PE Smart_e with vacuum suction system and a Flexilo Caompact tank

5 Pellet storage room ÖkoFEN has unrivalled know how and an unsurpassed range of solutions for adapting cellars and other rooms for storing wood pellets. We can provide advice on every aspect of storage, from the correct amount of space through to all inclusive floor solutions and fully automated pellet transport to the boiler. PE Smart_e with vacuum suction system and a pellet storage room

6 The technical refinements in detail 1958 mm 500 mm

7 Technical data PE Smart_e 0.6 Burner - nominal power kw 9 Burner - peak load kw 13 Electrical power W 600 Width - total mm 1175 Height - total mm 1958 Height of suction system filling unit mm 1660 Depth of boiler casing mm 1150 Maximum unit dimension mm 790 Tilted height mm 1970 Water supply/return Ø Zoll 3/4 (IG) Height of inlet/return mm 1330 Flue gas tube connection height mm 490 Condensation pipe connecting height mm 175 Dry weight fully equipped not packed kg 540 Boiler efficiency rated power % 102 Water capacity l 605 Available depression flue gas fan mbar 0.05 Flue gas temperature rated power C Flue gas tube diameter (at the boiler) mm 132 (inner) Chimney diameter Chimney construction Electrical connection value min. 130 mm as per chimney calculation qualified for condensing solid fuel damp resistant N1 or P1 (as per flue calculation) 230 VAC, 50Hz, 16A Volume hopper kg 32 Max. permissible operating pressure: Heating bar 3 DHW heat exchanger bar 6 Solar thermal exchanger bar 6 Heat exchanger areas: DHW heat exchanger l 0.8 Solar thermal exchanger l 2 Heat insulation: Casing. heat insulation special glass wool with glass silk coating of W/mK mm 100 DHW station delivery capacity 21 l/min at 60 C accumulator temperature and 45 C hot water temperature Minimum ceiling height mm ing

8 1. Pilot installation Austria Mr. & Mrs. Hopfner Lembach, Upper Austria Power output: 9 kw thermal / 0.6 kw electrical Living space: 160 m² Initial start-up: 2012 Additional technology: 20 m² solar thermal collectors, 5 kwp PV panels, in total: litre buffer storage Energy pioneer and Winner of Energy Star 2013 Willi Hopfner with his electric vehicle fleet LTR: Stefan Pumberger a. Roland Pargfrieder (ÖkoFEN technicians), Stefan a. Herbert Ortner (CEO ÖkoFEN), Vroni and Willi Hopfner (Customer), Miriam Gahleitner (ÖkoFEN_e project management), Michael Mayr (ÖkoFEN technicians) In addition to the pellets CHP Willi Hopfner is also using the sun s energy to generate electricity.

9 Pilot plant in a former farmhouse Austria Family Fröschl Münzbach, Upper Austria Power output: 9 kw thermal / 0.6 kw electrical Living space: 350 m² Initial start-up: 2013 Additional technology: 28 m² solar thermal collectors, two photovoltaic systems (5 and 10 kwp), in total: litre buffer storage The proud owner of the electricity-producing pellet heating system: Manfred and Maria Fröschl with their kids Anna and Jakob. The pellet heating system of the future is now producing both - heat and electricity for the use in the family home in Münzbach.

10 Pilot plant Italy Mr. & Mrs. Clusaz Avise (Aostatal), Italy Power output: 9 kw thermal / 0.6 kw electrical Living space: 270 m² Initial start-up: 2013 Additional technology: small on-site hydropower plant with an electrical output of 7.5 kw Anna and Clement Clusaz are rejoicing together with ÖkoFEN-Italy CEO Michael Schnarf the new and innovative heating system. In this lately renovated house of the family electricity and heat is now generated also out of wood pellets.

11 Pilot plant Austria Mr. & Mrs. Seebacher Schlierbach, Uppper Austria Power output: 9 kw thermal / 0.6 kw electrical Living space: about 180 m² Initial start-up: 2014 Additional technology: 20 m² solar thermal collectors 3.7 kwp photovoltaic system Franz and Katharina Seebacher rely on the innovativ CHP system from ÖkoFEN Through the combination of PV panels and the Pellematic Smart_e own and renewable generated electricity is now available the whole year. This electricity sources are also used for refueling the newly purchased electric car.

12 ÖkoFEN_e Electricity and heat from wood pellets Our mission is the realisation of a decentralised energy supply system. What s special about it? ÖkoFEN is developing CO2-neutral technologies based on wood pellets which are able to supply a building with both - heat and electricity! The visionaries of the wood pellet boiler branch: ÖkoFEN CEOs Herbert and Stefan Ortner. Heat and electricity with a clear conscience More efficient - more independent and cleaner than before. Current information about ÖkoFEN_e is available under the following links: ÖkoFEN headquarters: ÖkoFEN Pelletsheizung Gewerbepark Niederkappel (Austria) Tel (0) / [email protected] Web: 02/2016