D I R E C T O R Y - E M I S S I O N S
|
|
|
- Clifton Gervase Powers
- 7 years ago
- Views:
Transcription
1
2 D I R E C T O R Y - E M I S S I O N S A) Documentation Pages Test Report 1-12 Directory 2 Test Regulations 3 General Remarks and Summary 12 Test Setups (Photographs) B) Test Data Conducted Emissions 9/150/450 khz - 30 MHz 5, 11 Radiated Emissions 9 khz - 30 MHz 6, 11 Radiated Emissions 30 MHz MHz 7, 11 Interference Power 30 MHz MHz 8, 11 Harmonic Current Emissions and Voltage Fluctuations and Flicker C) Appendix A Test Data Sheets D) Appendix B 2nd through 40th Harmonics 9, 11 A1 A8 Constructional Data Form and Product Information Form(s) B1 B6 E) Appendix C Constructional Photographs C1 C6 Report Number: Part 1 Page 2 of 16 Rev. No. 12.2
3 EMISSIONS TEST REGULATIONS : The emissions tests were performed according to the following regulations: - EMC - Directive 2004/108/EC EN : EN : EN 55011:2009/A1: Group 1 - Group 2 - Class A - Class B - EN 55012:2007/A1: EN :2001/A1:2003/A2: EN :2006/A1:2009/A2: EN 55015:2006/A1:2007/A2: Household appliances and similar - Electric tools - Others. - EN 55022:2006/A1: Class A - Class B - EN :2006/A1:2009/A2: EN : EN :2000 Report Number: Part 1 Page 3 of 16 Rev. No. 12.2
4 Environmental Conditions In The Laboratory: Actual Temperature: : 25 C Relative Humidity: : 60% Atmospheric Pressure: : 1004mBar Power Supply Utilized: Power supply system : AC 230 V / 50 Hz Statement of Measurement Uncertainty: The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities that can account for a nominal measurement error of 4dB. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Symbol Definitions: - Applicable - Not Applicable Report Number: Part 1 Page 4 of 16 Rev. No. 12.2
5 Emissions Test Conditions: CONDUCTED EMISSIONS (Interference Voltage) The CONDUCTED EMISSIONS (INTERFERENCE VOLTAGE) measurements were performed at the following test location: - Test not applicable - Test Area A Test Equipment Used : Model Number Manufacturer Description TUV PS(SHA) Number DIA1512D Schaffner Discontinuous Interference Analyser 487/750206(No.E50) - ESHS30 Rohde & Schwarz EMI Test Receiver 70-7/ TÜV PS (SHA) Artificial Hand NSLK 8127 Schwarzbeck LISN 48-7/ ESH3-Z5 Rohde & Schwarz LISN 70-7/ ENV4200 Rohde & Schwarz LISN 48-7/ TK 9420 Schwarzbeck High-Voltage-Probe, 1.5kOhm 487/ DIA1512 Schaffner Discontinuous Interference Analyser N/A - SCR3501 Schaffner EMI Test Receiver N/A - NNB42 Schaffner LISN 487/ Remarks: Test equipment used is calibrated on a regular basis. Report Number: Part 1 Page 5 of 16 Rev. No. 12.2
6 Emissions Test Conditions: RADIATED EMISSIONS (Magnetic Field) The RADIATED EMISSIONS (MAGNETIC FIELD) measurements were performed at the following test location: - Test not applicable - Test Area Testing was performed at a test distance of : - 3 meters - 30 meters Test Equipment Used : Model Number Manufacturer Description TUV PS(SHA) Number ESHS30 Rohde & Schwarz EMI Test Receiver 70-7/ HM020 Rohde & Schwarz Triple-loop Antenna 48-7/ Remarks: Test equipment used is calibrated on a regular basis. Report Number: Part 1 Page 6 of 16 Rev. No. 12.2
7 Emissions Test Conditions: RADIATED EMISSIONS (Electric Field) The RADIATED EMISSIONS (ELECTRIC FIELD) measurements, in the frequency range of 30 MHz-1000 MHz, were tested in a horizontal and vertical polarization at the following test location : - Test not applicable - Test Area - Testing was performed at a test distance of : - 3 meters - 10 meters Test Equipment Used : Model Number Manufacturer Description TUV PS(SHA) Number - ESI40 Rohde & Schwarz Test receiver N/A B EMCO Antenna N/A - ESMI-Z7 Rohde & Schwarz Amplifier N/A Remarks: Test equipment used is calibrated on a regular basis. Report Number: Part 1 Page 7 of 16 Rev. No. 12.2
8 Emissions Test Conditions: INTERFERENCE POWER The INTERFERENCE POWER measurements were performed by using the absorbing clamp on the mains and interface cables in the frequency range 30 MHz MHz at the following test location : - Test not applicable - Test Area A Test Equipment Used : Model Number Manufacturer Description TUV PS(SHA) Number - MDS-21 Rohde & Schwarz Absorbing Clamp 70-7/ ESVS 30 Rhode & Schwarz EMI Test Receiver 70-7/ SCR350 Schaffner EMI Test Receiver N/A - AMZ41 Schaffner Absorbing Clamp N/A Remarks: Test equipment used is calibrated on a regular basis. Report Number: Part 1 Page 8 of 16 Rev. No. 12.2
9 Emissions Test Conditions: CONDUCTED EMISSIONS (Harmonics and Flicker) The Harmonic Current Emissions and Voltage Fluctuations and Flicker measurements were performed at the following test location: - Test not applicable - Test Area A Test Equipment Used : Model Number Manufacturer Description TUV PS(SHA) Number - PM 6000 Voltech Universal Power Analyzer 487/ IEC Standard 555 Voltech Reference Impedance Network 70-7/ C15003ix-400/3-CTS California Instruments AC Power Supply Testing System 487/ NSG1007 Schaffner AC power source N/A - CCN Schaffner Harmonics/flicker analyzer N/A Remarks: Test equipment used is calibrated on a regular basis. Report Number: Part 1 Page 9 of 16 Rev. No. 12.2
10 Equipment Under Test (EUT) Test Operation Mode - Emissions Tests: The equipment under test was operated under the following conditions during emissions testing: - Standby - Test Program (H - Pattern) - Test Program (Color Bar) - Test Program (Customer Specified) - Normal Operating Mode - Power on Configuration of the equipment under test: - See Constructional Data Form in Appendix B - See Product Information Form(s) in Appendix B The following peripheral devices and interface cables were connected during the testing: - Type : - Type : - Type : - Type : - Type : - Type : - Type : - Type : - unshielded power cable - unshielded cables - shielded cables - customer specific cables - - Report Number: Part 1 Page 10 of 16 Rev. No. 12.2
11 Emissions Test Results: Conducted Emissions, 150 khz - 30 MHz - PASS - FAIL - NOT APPLICABLE Minimum limit margin >6 db At MHz Maximum limit exceeding db At MHz Remarks: Radiated Emissions (Magnetic Field), 9 khz - 30 MHz - PASS - FAIL - NOT APPLICABLE Minimum limit margin db At MHz Maximum limit exceeding db At MHz Remarks: Interference Power at the Mains and Interface Cables, 30 MHz MHz - PASS - FAIL - NOT APPLICABLE Minimum limit margin >6 db At MHz Maximum limit exceeding -- db At -- MHz Comply with the limits reduces by Table 2b of EN ? - YES - NO - N/A Remarks: Radiated Emissions (Electric Field), - 30 MHz MHz, - 300MHz 1000MHz - PASS - FAIL - NOT APPLICABLE Minimum limit margin db At MHz Maximum limit exceeding db At MHz Remarks: Due to the fact that the Interference power emission readings from the EUT is lower than the limits (Table 2a) reduced by the margin (Table 2b), and the maximum clock frequency is less than 30MHz, the EUT is deemed to comply in the frequency range from 300MHz to 1000MHz without testing. Harmonic Current Emissions and Voltage Fluctuations and Flicker - PASS - FAIL - NOT APPLICABLE Harmonic measurement exceeding limit -- Above At -- Harmonic Flicker measurement exceeding limit -- Above The -- Requirement Remarks: Report Number: Part 1 Page 11 of 16 Rev. No. 12.2
12
13 Photograph of Test Setup: Conducted Emissions : 9/150/450 khz - 30 MHz - Test not applicable Report Number: Part 1 Page 13 of 16 Rev. No. 12.2
14 Photograph of Test Setup: Inteference Power 30 MHz MHz - Test not applicable Report Number: Part 1 Page 14 of 16 Rev. No. 12.2
15 Photograph of Test Setup: Radiated Emissions 30 MHz MHz - Test not applicable Report Number: Part 1 Page 15 of 16 Rev. No. 12.2
16 Photograph of Test Setup: Harmonic Current/Voltage Fluctuations and Flicker - Test not applicable Report Number: Part 1 Page 16 of 16 Rev. No. 12.2
17 Appendix A Test Data Sheets Report Number: Part 1 Page A1 of A8 Rev.No.12.2
18 Narrlands power Ltd. Report Number: Part 1 Page A2 of A8 Rev.No.12.2
19 Narrlands power Ltd. Report Number: Part 1 Page A3 of A8 Rev.No.12.2
20 Narrlands power Ltd. Report Number: Part 1 Page A4 of A8 Rev.No.12.2
21 Norrlands Report Number: Part 1 Page A5 of A8 Rev.No.12.2
22 Norrlands Report Number: Part 1 Page A6 of A8 Rev.No.12.2
23 Norrlands Report Number: Part 1 Page A7 of A8 Rev.No.12.2
24 Norrlands Report Number: Part 1 Page A8 of A8 Rev.No.12.2
25 Appendix B Constructional Data Form and Product Information Form(s) Report Number: Part 1 Page B1 of B6 Rev.No.12.2
26 Aufbauü bersicht fü r Elektrogerä te und Maschinen Data form for electrical equipment and machinery Auftraggeber / Applicant: Fertigungsstätte / Production facility: Geräteart / Type of equipment: Typenbezeichnung / Type/model: Industrial Supply (Qingdao) Ltd. Room 1601, #1 Building, 288 Ningxia Road, Qingdao, Shandong , People's Republic of China Norrlands Power Ltd. Dongdeng Village, Tushan Town, Laizhou City, Shandong Province , People's Republic of China Pellet Stove PS-50, PS-75, PS-90 Seriennr. / Serial no.: Nennspannung/Frequenz / Rated voltage/frequency: Nennaufnahme/Nennstrom / Rated input power: 230V /50Hz 400W N/A Anschlußdaten-Hydraulik: / Connection to hydraulic power: N/A Anschlußdaten-Pneumatik / Connection to pneumatic power: N/A Anschlußdaten-Wasser / Connection to waterinstallation: N/A Ausführung / Construction: Ortsfest Stationary Ortsveränderlich Portable Handgerät Hand-held Einbaugerät Open-frame Schutzklasse / Protection class: Schutzklasse I: SchutzleiteranschlußPE-connection SchutzklasseII: Schutzisoliert Double insulation SchutzklasseIII: Schutzkleinspannung/SELV/internally interne Stromversorgung powered Schutzart / Degree of protection against liquids: IP 20 Anschlußart / Supply connection: Feste Anschlußleitung Non detachable cord Fester Anschluß Permanent connection Gerätesteckvorrichtung Appliance inlet Netzbetriebsart / Rated operation: Dauerbetrieb Continuous operation Aussetzbetrieb Intermittent operation Kurzzeitbetrieb Short time operation Report Number: Part 1 Page B2 of B6 Rev.No.12.2
27 Report Number: Part 1 Page B3 of B6 Rev.No.12.2
28 Report Number: Part 1 Page B4 of B6 Rev.No.12.2
29 Circuit diagram Report Number: Part 1 Page B5 of B6 Rev.No.12.2
30 Report Number: Part 1 Page B6 of B6 Rev.No.12.2
31 Appendix C Constructional Photographs Report Number: Part 1 Page C1 of C6 Rev.No. 12.2
32 Report Number: Part 1 Page C2 of C6 Rev.No. 12.2
33 Report Number: Part 1 Page C3 of C6 Rev.No. 12.2
34 Report Number: Part 1 Page C4 of C6 Rev.No. 12.2
35 Report Number: Part 1 Page C5 of C6 Rev.No. 12.2
36 Report Number: Part 1 Page C6 of C6 Rev.No. 12.2
37
38 A) Documentation D I R E C T O R Y - I M M U N I T Y Pages Test Report 1-16 Directory 2 Test Regulations 3 General Remarks and Summary 16 Test Setups (Photographs) Test Setups (Drawings) N/A B) Test data: Immunity against Electrostatic Discharge 5 Radiated Electromagnetic Fields 6 Fast Transients (Burst) 7-8 Surge Transients 9-10 Conducted Disturbance PF Frequency Magnetic Fields 13 Voltage Dips, Interruptions & Variations 14 C) Appendix A ESD Test Point Map, Test Data Sheets D) Appendix B Constructional Data Form and Product Information Form(s) N/A B1 E) Appendix C Constructional Photographs of EUT C1 Report Number: Part 2 Page 2 of 22 Rev.No. 12.2
39 IMMUNITY TEST REGULATIONS : The immunity tests were performed according to the following regulations : - EMC - Directive 2004/108/EC EN : EN : EN : 1997/A1: 2001/A2: EN 55020: EN 55024:1998/A2: EN 61547: 1995/A1: IEC : IEC : 2006/A1: IEC : IEC : IEC : IEC : IEC : 2004 Symbol Definitions: - Applicable - Not Applicable Note: For undated references, the latest edition of the publication at the time of testing (including amendments) was applied. Report Number: Part 2 Page 3 of 22 Rev.No. 12.2
40 Environmental Conditions In The Laboratory: Actual Temperature: : 25 C Relative Humidity: : 60% Atmospheric Pressure: : 1004mBar Power Supply Utilized: Power supply system : AC 230 V / 50 Hz Symbol Definitions: - Applicable - Not Applicable Report Number: Part 2 Page 4 of 22 Rev.No. 12.2
41 Immunity Test Conditions: ELECTROSTATIC DISCHARGE (ESD) The immunity against ELECTROSTATIC DISCHARGE (ESD) events was performed in the following location: - Test not applicable - Test Area - A Test Equipment Used : Model Number Manufacturer Description TUV PS(SHA) Number - NSG435 Schaffner ESD Simulator System 70-7/ TÜV Product Service Horizontal Coupling Plane TÜV Product Service Vertical Coupling Plane PESD3010 HAEFELY ESD Simulator System 487/ Remarks: Test equipment used is calibrated on a regular basis. Test Specification: Discharge Voltage (Air): - 2 kv - 8 kv - 6 kv - 4 kv - 15 kv - _ kv Discharge Voltage (Contact): - 2 kv - 6 kv - _ kv - 4 kv - 8 kv Discharge Impedance: / 150 pf / 150 pf Discharge Repetition Rate: Number of Discharges: - 1 sec at all locations Kind of Discharges: - Air discharge - Conducted discharge (relay) - Direct - Indirect Polarity: - Positive - Negative Location of Discharge: Result : - No degradation of function - Distortion of function - Error of function - Loss of function - See Data Record(s) in Appendix A - Each location on the surface touchable by hand - See drawing in Appendix A - VCP - Met Criterion A - Met Criterion B - Met Criterion C - Unrecoverable Failure Remarks: Report Number: Part 2 Page 5 of 22 Rev.No. 12.2
42 Immunity Test Conditions: RADIATED ELECTROMAGNETIC FIELDS The immunity against RADIATED ELECTROMAGNETIC FIELDS exposure was performed in the following location: - Test not applicable - Test Area - Test Equipment Used : Model Number Manufacturer Description TUV PS(SHA) Number Marconi Signal Generator N/A - 100W/1000M1 Amplifier Research Amplifier N/A - FM 2000 Amplifier Research Isotropic Field Monitor N/A - FP 2000 Amplifier Research Isotropic Prob N/A - AT 1080 Amplifier Research Log-periodic Antenna N/A - 486DX2 N/A PC N/A Remarks: Test equipment used is calibrated on a regular basis. Test Specification: Frequency Range: - 27 MHz MHz - 26 MHz MHz - 9 khz - 27 MHz - 80 MHz MHz Field Strength: - 1 V/m - 3 V/m - 10 V/m - _ V/m Distance Antenna - EUT: - 1 m - 3 m Modulation: - AM : 80 % 1 khz - FM : khz dev. khz - sine wave: - unmodulated - Pulse ON/OFF Duty Cycle: % Step: -< decades / sec - 1% Polarization of Antenna: - Horizontal - Vertical Result : - No degradation of function - Distortion of function - Error of function - Loss of function - Met Criterion A - Met Criterion B - Met Criterion C - Unrecoverable Failure Remarks: Report Number: Part 2 Page 6 of 22 Rev.No. 12.2
43 Immunity Test Conditions: FAST TRANSIENTS (BURST) The immunity against FAST TRANSIENTS (BURST) events was performed in the following test location: - Test not applicable - Test Area - A Test Equipment Used : Model Number Manufacturer Description TUV PS(SHA) Number - EFT500 EM Test EFT/Burst Generator 70-7/ TDS 524A Tektronix Digital Oscilloscope 70-7/ CDN125 Schaffner Capacitive Coupling Clamp 48-7/ Remarks: Test equipment used is calibrated on a regular basis. Test Specification: Pulse Amplitude - AC Power Port: - 1,0 kv - 2,0 kv - 4,0 kv - kv Pulse Amplitude - DC Power Port: - 1,0 kv - 2,0 kv - 4,0 kv kv Pulse Amplitude - Signal/Data - 0,5 kv - 1,0 kv Non control Port: - 2,0 kv - kv Pulse Amplitude - Process: - 0,5 kv - 1,0 kv Measurement & Control Port - 2,0 kv - kv Burst Frequency: - 2,5 khz - 5,0 khz - khz Time of Coupling: - 60 seconds - _120 seconds Coupling Method: - Coupling/decoupling network - Coupling clamp Polarity: - Positive - Negative Report Number: Part 2 Page 7 of 22 Rev.No. 12.2
44 Immunity Test Conditions: FAST TRANSIENTS (BURST), continued Location of Coupling: name of lines: AC Supply Cord type of lines: - shielded - unshielded status of lines: - passive - active kind of transmission: - analog - digital length of lines: 0.5m name of lines: type of lines: - shielded - unshielded status of lines: - passive - active kind of transmission: - analog - digital length of lines: name of lines: type of lines: - shielded - unshielded status of lines: - passive - active kind of transmission: - analog - digital length of lines: Result : - No degradation of function - Distortion of function - Error of function - Loss of function - Met Criterion A - Met Criterion B - Met Criterion C - Unrecoverable Failure Remarks: Report Number: Part 2 Page 8 of 22 Rev.No. 12.2
45 Immunity Test Conditions: SURGE TRANSIENTS The immunity against SURGE TRANSIENTS events was performed in the following test location: - Test not applicable - Test Area - A Test Equipment Used : Model Number Manufacturer Description TUV PS(SHA) Number - VCS 500 EM TEST Surge Generator 70-7/ TDS 524A Tektronix Digital Oscilloscope 70-7/ Remarks: Test equipment used is calibrated on a regular basis. Test Specification: Pulse Amplitude - AC Power Port: - 1,0 kv - 2,0 kv - 4,0 kv - kv Pulse Amplitude - DC Power Port: - 1,0 kv - 2,0 kv - 4,0 kv - kv Pulse Amplitude - Signal/Data - 0,5 kv - 1,0 kv Non control Port: - 2,0 kv - kv Pulse Amplitude - Process: - 0,5 kv - 1,0 kv Measurement & Control Port - 2,0 kv - kv Source Impedance: µf µf ,1 µf ,5 µf Number of Surges: - 10 surges/angle - 5 surges /angle Angle: Repetition Rate: - 60 sec. - sec. Polarity: - Positive - Negative Report Number: Part 2 Page 9 of 22 Rev.No. 12.2
46 Immunity Test Conditions: SURGE TRANSIENTS, continued Location of Coupling: name of lines: AC supply cord type of lines: - shielded - unshielded status of lines: - passive - active kind of transmission: - analog - digital length of lines: 1.5m name of lines: type of lines: - shielded - unshielded status of lines: - passive - active kind of transmission: - analog - digital length of lines: name of lines: type of lines: - shielded - unshielded status of lines: - passive - active kind of transmission: - analog - digital length of lines: Result: - No degradation of function - Distortion of function - Error of function - Loss of function - Met Criterion A - Met Criterion B - Met Criterion C - Unrecoverable Failure Remarks: Report Number: Part 2 Page 10 of 22 Rev.No. 12.2
47 Immunity Test Conditions: CONDUCTED DISTURBANCE The immunity against CONDUCTED DISTURBANCE events, induced by radio frequency fields above 9 khz, was performed in the following test location: - Test not applicable - Test Area - A Test Equipment Used : Model Number Manufacturer Description Number - NSG2070 Schaffner RF-Generator 48-7/ CDN725 Schaffner EM Clamp 48-7/ INA726 Schaffner De-coupling-Network 48-7/ CDN M2 Schaffner Coupling-Decoupling-Network 48-7/ CDN M3 Schaffner Coupling-Decoupling-Network 48-7/ MD720 Schaffner Monitoring Probe 48-7/ CIP9136 Schaffner Current Inject Probe 48-7/ Remarks: Test equipment used is calibrated on a regular basis. Test Specification: Frequency Range: - 0,15 MHz MHz - 0,15 MHz - 80 MHz Voltage Level (EMF): - 1 V - 3 V - 10 V - V Modulation: - AM : 80 % 1 khz - FM : khz dev. khz - sine wave: - unmodulated - Pulse ON/OFF Duty Cycle: % Step: -1 % Report Number: Part 2 Page 11 of 22 Rev.No. 12.2
48 Immunity Test Conditions: CONDUCTED DISTURBANCE, continued Location of Coupling: name of lines: AC supply cord type of lines: - shielded - unshielded status of lines: - passive - active kind of transmission: - analog - digital length of lines: 0.3m name of lines: type of lines: - shielded - unshielded status of lines: - passive - active kind of transmission: - analog - digital length of lines: name of lines: type of lines: - shielded - unshielded status of lines: - passive - active kind of transmission: - analog - digital length of lines: Result : - No degradation of function - Distortion of function - Error of function - Loss of function - Met Criterion A - Met Criterion B - Met Criterion C - Unrecoverable Failure Remarks: Report Number: Part 2 Page 12 of 22 Rev.No. 12.2
49 Immunity Test Conditions: PF FREQUENCY MAGNETIC FIELD The immunity against RF FREQUENCY MAGNETIC FIELD exposure, induced by radio frequency fields above 9 khz, was performed in the following test location: - Test not applicable - Test Area - Test Equipment Used : Model Number Manufacturer Description TUV PS(SHA) Number - MAG HEAFELY Magnetic Field Tester Chroma AC Source Remarks: Test equipment used is calibrated on a regular basis. Test Specification: Frequency Range: - 50 Hz - 60 Hz Hz Field level (EMF): - 1 A/m - 3 A/m - 10 A/m - 30 A/m A/m - A/m Short Field (1-3 sec): A/m A/m - A/m Duration: - seconds Axis of Orientation: - X-axis - Y-axis - Z-axis Result : - No degradation of function - Distortion of function - Error of function - Loss of function - Met Criterion A - Met Criterion B - Met Criterion C - Unrecoverable Failure Remarks: Report Number: Part 2 Page 13 of 22 Rev.No. 12.2
50 Immunity Test Conditions: VOLTAGE DIPS, INTERRUPTIONS & VARIATIONS The immunity against VOLTAGE DIPS, INTERRUPTIONS & VARIATIONS events, induced by radio frequency fields above 9 khz, was performed in the following test location: - Test not applicable - Test Area - A Test Equipment Used : Model Number Manufacturer Description TUV PS(SHA) Number - PROFLINE2115 Schaffner IEC61000 Testing System N/A - C15003ix-400/3-CTS California Instruments AC Power Supply Testing System 48-7/ UCS 500 EMtest Voltage Drop Generator 487/ Remarks: Test equipment used is calibrated on a regular basis. Test Specification: Nominal Mains Voltage (V NOM ): Vac - Vac - Vdc Level of Reduction (dip): ms at 30% of V NOM ms at 60% of V NOM - Duration of Interruption (>.95*V NOM ): ms - 10 ms Voltage Fluctuation: -V NOM + 10% -V NOM - 10% Result : - No degradation of function - Met Criterion A (30% and interruption) - Distortion of function - Met Criterion B - Error of function - Met Criterion C (60%) - Loss of function - Unrecoverable Failure Remarks: During the test of the voltage dips of 60% Un, the EUT restarted and worked into the standby mode. After the test, it can be normal operation by manual. Report Number: Part 2 Page 14 of 22 Rev.No. 12.2
51 Equipment Under Test (EUT) Test Operation Mode - Immunity Tests : The equipment under test was operated under the following conditions during immunity testing : - Standby - Test Program (H - Pattern) - Test Program (Color Bar) - Test Program (Customer Specified) - Normal Operating Mode - Power on Configuration of the equipment under test: - See Constructional Data Form in Appendix B - See Product Information Form(s) in Appendix B The following peripheral devices and interface cables were connected during the testing: - Type : - Type : - Type : - Type : - Type : - Type : - Type : - Type : - unshielded power cable - unshielded cables - shielded cables - customer specific cables - - Report Number: Part 2 Page 15 of 22 Rev.No. 12.2
52
53 Photograph of Test Setup: Electrostatic Discharge (ESD) - Test not applicable IEC EN Report Number: Part 2 Page 17 of 22 Rev.No. 12.2
54 Photograph of Test Setup: Radiated Electromagnetic Field - Test not applicable IEC EN Report Number: Part 2 Page 18 of 22 Rev.No. 12.2
55 Photograph of Test Setup: Fast transients (BURST) - Test not applicable IEC EN Report Number: Part 2 Page 19 of 22 Rev.No. 12.2
56 Photograph of Test Setup: SURGE transients - Test not applicable IEC EN Report Number: Part 2 Page 20 of 22 Rev.No. 12.2
57 Photograph of Test Setup: Conducted disturbance - Test not applicable IEC EN Report Number: Part 2 Page 21 of 22 Rev.No. 12.2
58 Photograph of Test Setup: Voltage Dips, Interruptions & Variations - Test not applicable IEC EN Report Number: Part 2 Page 22 of 22 Rev.No. 12.2
59 Appendix A Test Data Sheets N/A Report Number: Part 2 Page A1 of A1 Rev.No. 12.2
60 Appendix B Constructional Data Form and Product Information Form(s) Please refer to Appendix B to EMC EMISSION - TEST REPORT Report Number: Part 2 Page B1 of B1 Rev.No. 12.2
61 Appendix C Constructional Photographs of Equipment Under Test (EUT) please refer to Appendix C to EMC EMISSION - TEST REPORT Report Number: Part 2 Page C1 of C1 Rev.No. 12.2
TEST REPORT EN 55014-2 (1997) +A1 (2001)
Page 1 of 23 TEST REPORT EN 55014-2 (1997) +A1 (2001) Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity Report Reference No....
Rated Power(W) 8W 2. EG-LED0840-01 8W 3. EG-LED1027-01 10W
14713221 001 Seite 2 von 37 Page 2 of 37 Model List: No Model Rated Voltage(V) 1. EG-LED0827-01 Rated Power(W) 8W 2. EG-LED0840-01 8W 3. EG-LED1027-01 10W 4. EG-LED1040-01 AC 100-240V, 10W 5. EG-LED1027-02
SHENZHEN GEMBIRD ELECTRONICS LTD EMC REPORT
Shenzhen BST Technology Co., Ltd. SHENZHEN GEMBIRD ELECTRONICS LTD EMC REPORT Prepared For : Product Name: Model : Prepared By : SHENZHEN GEMBIRD ELECTRONICS LTD 5th Floor, Building B, Shifeng Industry
EMC TEST REPORT For. Shenzhen Homelux Security Equipment Co., Ltd. Auto Dialer. Model No.: HX-GD20
EMC TEST REPORT For Shenzhen Homelux Security Equipment Co., Ltd Auto Dialer Model No.: HX-GD20 Prepared for : Shenzhen Homelux Security Equipment Co., Ltd Address : 4 th Floor, Building 5, Jiademaluan
EN 301 489-17 v1.2.1 TEST REPORT FOR. 802.11ag/Draft 802.11n WLAN PCI-E Mini Card MODEL NUMBER: BCM94322MC REPORT NUMBER: 07U11529-5
EN 301 489-17 v1.2.1 TEST REPORT FOR 802.11ag/Draft 802.11n WLAN PCI-E Mini Card MODEL NUMBER: BCM94322MC REPORT NUMBER: 07U11529-5 ISSUE DATE: JANUARY 29, 2008 Prepared for BROADCOM CORPORATION 190 MATHILDA
Standard: EN 61000-4-2 :1995, EN 61000-4-3 :1996, ENV 50204 :1993, & EN 61000-4-4 :1995 Solid State Energy Meter
Standard: EN 61000-4-2 :1995, EN 61000-4-3 :1996, ENV 50204 :1993, & EN 61000-4-4 :1995 Model: Solid State Energy Meter Prepared for: Analog Devices, Inc. 804 Woburn Street Wilmington, MA 01887 Date of
Test Report #: 1981-3 Date: April 8, 2005
Test Report #: 1981-3 Date: April 8, 2005 CERTIFICATE #2316.01 Issued To: Bill Burks American Power Conversion 85 Rangeway Road North Billerica, MA 01862 USA 978-670-2440 Product Name/Description Model
Test Report. Prepared for: Technologic Systems, Inc. Model: TS-8820
Test Report Prepared for: Technologic Systems, Inc. Model: TS-8820 Description: Single Board Computer with Analog and Digital Inputs and Outputs, Relays, and RS-232/485 Ports To IEC 61000-6-1 (2005-03)
EMC TEST REPORT For. Webcam. Model Number: CAM67U
EMC TEST REPORT For Webcam Model Number: CAM67U Prepared for : Gembird Europe B.V. Wittevrouwen 56, 1358CD Almere, The Netherlands. Phone: +31-36-5211588 Prepared By : Shenzhen Meihua Electronic Technology
TEST REPORT Rapporto di prova EMC N 060406. Test facility site: via L. da Vinci, 92, Caravaggio (BG), Italy Sede laboratorio
TEST REPORT Rapporto di prova EMC N 060406 EUT: Organic Carbon Analyzer Analiuzzatore Carbonio Organico Model: TOCMETER Serial N : TM602 Client: TRE-ESSE s.r.l. Cliente Piazzale Europa 8 16036 Recco (GE),
EMC TEST REPORT. Page: 1 of 38. Reference No.: WT08010091-S-E
Page: 1 of 38 EMC TEST REPORT Reference No. Applicant Address : WT08010091-S-E : Gembird Electronics Ltd. : Room 1709 A, News Building, #2 Shennan Zhong Lu, Shenzhen, China Equipment Under Test (EUT) :
EMC Test for Compliance with EU EMC Directive 2004/108/EU
EMC Test for Compliance with EU EMC Directive 2004/108/EU Partial Test 12-12-2012 Standards Description EN 55022:2011 Information technology equipment - Radio disturbance characteristics - Limits and methods
Declaration of Conformity.
Declaration of Conformity. Type of equipment: Brand Name /Trade Mark: Type designation /model: Applicant: Network Camera SAMSUNG SND6011RP SAMSUNG TECHWIN CO., LTD. In accordance with the following Directives:
Electromagnetic Compatibility Test Report Test results of Floww equipment
Electromagnetic Compatibility Test Report Test results of Floww equipment Reference number Status test report Brand Model number : 10C00357RPT01.doc : Final : Floww : mobilefloww screenfloww pocketfloww
MYRICOM, INC. TEST REPORT FOR THE LAN INTERFACE CARD, M3F2-PCIXE-2
MYRICOM, INC. TEST REPORT FOR THE LAN INTERFACE CARD, M3F2-PCIXE-2 EN55024 (1998), EN61000-3-2 (2001), EN61000-3-3 (1995 W/A1: 98), EN55022 (1998) CLASS A, CISPR 22 (1997) CLASS A & FCC PART 15 SUBPART
Prepared for Dorman Long Engineering Technology Consultant (Shanghai) Co., Ltd.
www.ecmg-global.com EMC TEST REPORT On Model Name: DL-P40 Computer Control System Model Number: Release 3.0 Hardware and Software Brand Name: Dorman Long Technology Ltd. Trade Mark: DLT Prepared for Dorman
Declaration of Conformity.
Declaration of Conformity. Type of equipment: Brand Name /Trade Mark: Type designation /model: Applicant: PTZ CAMERA SAMSUNG SCP2371HP SAMSUNG TECHWIN CO., LTD. In accordance with the following Directives:
Variant Model No. The equipment under test has found to be compliant with the applied standards. (Refer to the attached test result for more detail.
EMC TEST REPORT Project No. LBE091881 Revision No. NONE Name of organization Samsung Electronics Co., Ltd. Applicant Address 416 Maetan 3-Dong,Yeongtong-Gu,Suwon-Si, Gyeonggi-Do, 443-742 Korea Date of
Declaration of Conformity.
Declaration of Conformity. Type of equipment: Brand Name /Trade Mark: Type designation /model: Applicant: Network Camera SAMSUNG SNO-6011RP SAMSUNG TECHWIN CO., LTD. In accordance with the following Directives:
Telephone- and leased line modem for industrial applications TD-36
Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased
CERTIFICATE. Issued Date:May. 18, 2006 Report No.: 065L043-IT-CE-P07V03. MGate MB318n(-T) (n=0~9,a~z)
CERTIFICATE Issued Date:May. 18, 2006 Report No.: 065L043-IT-CE-P07V03 This is to certify that the following designated product Product Trade name Model Number : 1 Port Device Server : Moxa : NPort 5150(-T),
Declaration of Conformity.
Declaration of Conformity. Type of equipment: Brand Name /Trade Mark: Type designation /model: Applicant: Network Camera SAMSUNG SNP-6200RHP SAMSUNG TECHWIN CO., LTD. In accordance with the following Directives:
ELECTROMAGNETIC COMPATIBILITY TEST. Report reference N R-255 EMC 2010
ELECTROMAGNETIC COMPATIBILITY TEST Report reference N R-255 EMC 2010 Constructor. Address Reference person. C LUCE S.r.l. Via Marmolada 5/11 20060 Truccazzano (MI) Italy ---- Product....... Model......
Declaration of Conformity.
Declaration of Conformity. Type of equipment Brand Name /Trade Mark Type designation /model Applicant Network Camera SAMSUNG SND-5083P SAMSUNG TECHWIN CO., LTD. In accordance with the following Directives
FCC PART 15B CLASS A MEASUREMENT AND TEST REPORT
FCC PART 15B CLASS A MEASUREMENT AND TEST REPORT For SAMBO HI TECH CO., LTD. 616-15, GANSUK4-DONG, NAMDONG-GU, INCHUN 405-810, KOREA Model: LSR700, SCI545HV1EF, SCI545HVEF This Report Concerns: Original
CE-EMC TEST- REPORT TEST REPORT NUMBER: EFSN14040316E-E01 EUROFINS TESTING TECHNOLOGY (SHENZHEN) CO., LTD.
EUROFINS TESTING TECHNOLOGY (SHENZHEN) CO., LTD. CE-EMC TEST- REPORT TEST REPORT NUMBER: EFSN14040316E-E01 Phone: +86-755-83585700 3A, F1.6, Tianfa Building, Tian an Cyber Park, Fax: +86-755-83585701 Futian
TEST REPORT. Please refer to section 3 of this report which indicates which item was actually tested and which were electrically identical.
198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: sgs_internet_operations@sgs.com
Declaration of Conformity.
Declaration of Conformity. Type of equipment: Brand Name /Trade Mark: Type designation /model: Applicant: PTZ CAMERA SAMSUNG SNP-5300P SAMSUNG TECHWIN CO., LTD. In accordance with the following Directives:
Rack mounted telephone- and leased line modem for industrial applications
Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as
Waveguide Access Point WGA631. Product Guide
Waveguide Access Point Product Guide Waveguide Access Point Contents 1. Description............................ 3 2. Application............................ 3 3. Technical data... 4 4. Physical interfaces......................
CERTIFICATE OF CONFORMITY
AIRBAKE ALL-CLAD ARNO CALOR CLOCK KRUPS LAGOSTINA MIRRO MOULINEX PANEX PENEDO REGAL ROCHEDO ROWENTA SAMURAI SEB SUPOR TEFAL T-FAL WEAREVER CERTIFICAT DE CONFORMITE CERTIFICATE OF CONFORMITY N DQNE-02-22611
AN96-07. Surging Ideas TVS Diode Application Note PROTECTION PRODUCTS. TRANSIENT IMMUNITY STANDARDS: IEC 61000-4-x
TRANSIENT IMMUNITY STANDARDS: IEC 61000-4-x On January 1, 1996, exports into Europe began facing some tough transient immunity standards. The International Electrotechnical Commission (IEC), a worldwide
30 In Compliance October 2014 www.incompliancemag.com
30 In Compliance October 2014 www.incompliancemag.com Medical Devices in a Wireless World BY IVAYLO TANKOV While wireless technology is now an integral component of a wide variety of manufactured products,
Current Probes. User Manual
Current Probes User Manual ETS-Lindgren L.P. reserves the right to make changes to any product described herein in order to improve function, design, or for any other reason. Nothing contained herein shall
Dual Chamber Temporary External Pacemaker
5392 Dual Chamber Temporary External Pacemaker Electromagnetic Compatibility Declaration Caution: Federal law (USA) restricts this device to sale by or on the order of a physician. The following list includes
BioStation Mifare OC(BSM-OC) NONE. Receipt Date 21-Feb-08 Receipt Number. Issued Date 18-Mar-08 Tested Date
Test Report for CE Report Number Applicant ESTCE0803-003 Company Name Address Product type Suprema Inc. 16F Parkview Office Tower, Jeongja-dong, Bundang-gu,Seongnam, Gyeonggi, 463-863 Korea FINGERPRINT
TEST REPORT FROM RFI GLOBAL SERVICES LTD
FROM RFI GLOBAL SERVICES LTD Partial Test of: BTM411 To: EN 300 328 V1.7.1 (2006-10) Test Report Serial No: RFI/RPT1/RP76018JD01A This Test Report Is Issued Under The Authority Of Brian Watson, Operations
Measurement of RF Emissions from a Final Coat Electronics Corrosion Module
Engineering Test Report No. 37802-02 Rev. A Measurement of RF Emissions from a Final Coat Electronics Corrosion Module For : Canadian Auto Preservation, Inc. 390 Bradwick Drive Concord, Ontario CANADA
NMI M 6-2 Electricity Meters. Part 2: Test Report Format
NMI M 6-2 Electricity Meters Part 2: Test Report Format Commonwealth of Australia 2010 First edition September 2010 National Measurement Institute Bradfield Road, Lindfield, NSW 2070 PO Box 264, Lindfield,
Energy Management Energy Meter Type EM23 DIN
Energy Management Energy Meter Type EM23 DIN Class 1 (kwh) according to EN62053-21 Class B (kwh) according to EN50470-3 Class 2 (kvarh) according to EN62053-23 Accuracy ±0.5 RDG (current/voltage) Energy
CE MARK TECHNICAL FILE AS/NZS EMC CONSTRUCTION FILE
CE MARK TECHNICAL FILE AS/NZS EMC CONSTRUCTION FILE of Product Name Model Brand Memorex; Imation; TDK Life on Record Contains: 1. Declaration of Conformity 2. EN55022/CISPR 22, AS/NZS CISPR 22 EMI test
EMC STANDARDS STANDARDS AND STANDARD MAKING BODIES. International. International Electrotechnical Commission (IEC) http://www.iec.
EMC STANDARDS The EMC standards that a particular electronic product must meet depend on the product application (commercial or military) and the country in which the product is to be used. These EMC regulatory
RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu,
APPROVAL SHEET CUSTOMER ituner CUSTOMER P/N DESCRIPTION EDAC MODEL 12V/6.6A SERIES NO. (E17) EA10953A DATE 2010-06-22 REVISION 0 APPROVED DESIGN PREPARE RoHS CONCLUSION APPROVED CONDITON CUSTOMER S APP
IEC 1000-4-2 ESD Immunity and Transient Current Capability for the SP72X Series Protection Arrays
IEC 00-4-2 ESD Immunity and Transient Current Capability for the SP72X Series Protection Arrays Application Note July 1999 AN9612.2 Author: Wayne Austin The SP720, SP721, SP723, and SP724 are protection
Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Max Output Power (W) 1 AC-DC Constant Current or Constant Over temperature protection Voltage LED Driver Over current
7.5 Watt AC-DC Switch Power Supply
MAIN FEATURES: 7.5W Small Compact Size PCB Mount Single Output Regulated Output Range : 3.3VDC 24VDC Input Range : 85VAC 265VAC/47 63Hz Or 120VDC 370VDC Very Low Standby Power Consumption < 0.15W Better
DDX 7000 & 8003. Digital Partial Discharge Detectors FEATURES APPLICATIONS
DDX 7000 & 8003 Digital Partial Discharge Detectors The HAEFELY HIPOTRONICS DDX Digital Partial Discharge Detector offers the high accuracy and flexibility of digital technology, plus the real-time display
DDX 7000 & 8003. Digital Partial Discharge Detectors FEATURES APPLICATIONS
DDX 7000 & 8003 Digital Partial Discharge Detectors The HAEFELY HIPOTRONICS DDX Digital Partial Discharge Detector offers the high accuracy and flexibility of digital technology, plus the real-time display
for Communication Systems Protection EMI CD-ROM INCLUDED
Krešimir Malarić EMI Protection for Communication Systems CD-ROM INCLUDED Contents Preface xiii CHAPTER 1 Communications Systems 1 1.1 Components of Communications Systems 1 1.2 Transmitter Systems 2 1.2.1
R&S ENY81-CA6 Coupling Network For radio disturbance and immunity measurements
R&S ENY81-CA6 Coupling Network For radio disturbance and immunity measurements on telecommunications ports Test & Measurement Data Sheet 01.00 R&S ENY81-CA6 Coupling Network At a glance The R&S ENY81-CA6
Teseq ESD Simulator Verification
Teseq ESD Simulator Verification Background Greg Senko, President Teseq Inc. North American division of Teseq Laboratory Technical Manager Edison NJ This presentation was first given in 2003 when lab was
TEST REPORT. CONCLUSION: The submitted sample was found to COMPLY with the test requirement
TEST REPORT Applicant Address Shenzhen Gembird Electronics Ltd. 5F, Building B, Shi-Feng Industrial Zone, Hua-Ning Rd., Xin-Wei Village, Da-Lang Street, Long-Hua, Bao-An Area, Shenzhen 518109, Guangdong
RAPPORTO DI PROVA TEST REPORT. Titolo (Title): EMC Immunity test and measure of the harmonic components and Flicker on. SP40 plus
RAPPORTO DI PROVA TEST REPORT Titolo (Title): EMC Immunity test and measure of the harmonic components and Flicker on SP40 plus Richiedente (Customer): - Ente/Società (Dept./Firm): Compuprint S.p.A. -
SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
588 West Jindu Road,Songjiang District,Shanghai,China Telephone: +86 (0) 21 6191 5666 Fax: +86 (0) 21 6191 5678 ee.shanghai@sgs.com Page: 1 of 23 1 Cover Page Application No.: Applicant: Manufacturer:
Rules for Classification and Construction Additional Rules and Guidelines
VI Rules for Classification and Construction Additional Rules and Guidelines 7 Guidelines for the Performance of Type Approvals 2 Test Requirements for Electrical / Electronic Equipment and Systems Edition
RX-AM4SF Receiver. Pin-out. Connections
RX-AM4SF Receiver The super-heterodyne receiver RX-AM4SF can provide a RSSI output indicating the amplitude of the received signal: this output can be used to create a field-strength meter capable to indicate
Type: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description
Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
LAB 1 TECHNICAL DOC 3 IN ONE LAB DEVICE. Velleman Legen Heirweg 33 9890 Gavere Belgium
LAB 1 TECHNICAL DOC 3 IN ONE LAB DEVICE Velleman Legen Heirweg 33 9890 Gavere Belgium SPECIFICATIONS DIGITAL MULTIMETER 3 1/2 backlit LCD Automatic polarity indication DC voltage 200mV to 600V in 5 steps
Power Meter Series 700
PowerLogic power-monitoring units Power Meter Series 700 Technical data sheet 2007 Functions and characteristics E90463 The PowerLogic Power Meter Series 700 offers all the measurement capabilities required
NMI R 118 Testing Procedures and Test Report Format for Pattern Evaluation of Fuel Dispensers for Motor Vehicles (OIML R 118:1995(E), NEQ)
Testing Procedures and Test Report Format for Pattern Evaluation of Fuel Dispensers for Motor Vehicles (OIM R 118:1995(E), NEQ) The English version of international standard OIM R 118:1995 Testing Procedures
RISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features:
Application : RISH Master 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network & replaces the multiple analog
RF data receiver super-reactive ASK modulation, low cost and low consumption ideal for Microchip HCS KEELOQ decoder/encoder family. 0.
Receiver AC-RX2/CS RF data receiver super-reactive ASK modulation, low cost and low consumption ideal for Microchip HCS KEELOQ decoder/encoder family. Pin-out 38.1 3 Component Side 1 2 3 7 11 13 14 15
CE EMC Test Report. : Texas Instruments Incorporated : WiFi and Bluetooth Evaluation Board
CE EMC Test Report APPLICANT EQUIPMENT BRAND NAME MODEL NAME : Texas Instruments Incorporated : WiFi and Bluetooth Evaluation Board : Texas Instruments : WL1835MODCOM8B STANDARD : ETSI EN 301 489-1 V1.9.2
MCR-VDC-UI-B-DC. Voltage Transducer for DC Voltages. INTERFACE Data Sheet 100260_en_01. 1 Description
Voltage Transducer for DC Voltages TERFACE Data Sheet 000_en_0 PHOENIX CONTACT - /00 Description The MCR voltage transducer measures DC voltages in several signal ranges from 0... ±0 V DC to 0... ±0 V
AMIS. Automated Metering and Information System. Integration of meters from other manufacturers
AMIS Automated Metering and Information System TD-3530/TACU30 Third-Party Device Gateway Integration of meters from other manufacturers Connection and integration of max. 3 meters from third party manufactureres
DATA SHEET DVI - HDCP Extension Cable
DATA SHEET DVI - HDCP Extension Cable Contents Description Features Absolute Maximum Ratings Recommended Operating Conditions Electrical Power Supply Characteristics Receiver Electrical Interface Specifications
Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
STRATO LED Drivers 70W, Single output
Features STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products make them the ideal choice for LED
1587/1577. Insulation Multimeters. Technical Data. Two powerful tools in one.
1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter
Predicting radiated emissions from cables in the RE02/RE102/DO- 160/SAE J113-41 test set up, using measured current in NEC and simple TX equations.
Predicting radiated emissions from cables in the RE02/RE102/DO- 160/SAE J113-41 test set up, using measured current in NEC and simple TX equations. D. A. Weston RE02Tx.rep 14-6-2004 NARTE Certified EMC
Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited
Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1
Power Supply Unit, Primary Switched, Narrow Design MINI POWER provides: Extra narrow design with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide-range input
Amplifier for Small Magnetic and Electric Wideband Receiving Antennas (model AAA-1B)
Amplifier for Small Magnetic and Electric Wideband Receiving Antennas (model AAA-1B) 1. Description and Specifications Contents 1.1 Description 1.2 1.2 Specifications 1.3 1.3 Tested parameters in production
Advancements in Lightning Test Services
Advancements in Lightning Test Services Presentation Overview Basic Lightning Concepts Indirect Effects Testing Waveforms General Test Methods Elite Testing Capability What s in place What s new Lightning
The EMI-Receiver according to CISPR 16-1-1
Author: Dipl. -Ing. Dieter Schwarzbeck Schwarzbeck Mess-Elektronik An der Klinge 29 D-69250 Schönau / Germany Tel.: +49 6228 1001 Fax.:+49 6228 1003 support@schwarzbeck.de www.schwarzbeck.de Requirements
TRACTION NETWORK MONITORING AND PROTECTION SYSTEM SMTN-3 CITY ELECTRIC TRANSPORT RAILWAYS METRO INDUSTRY
TRACTION NETWORK MONITORING AND PROTECTION SYSTEM SMTN-3 CITY ELECTRIC TRANSPORT RAILWAYS METRO INDUSTRY 2 TRACTION NETWORK MONITORING AND PROTECTION SYSTEM Traction network monitoring and protection system,
Analysis of Immunity by RF Wireless Communication Signals
64 PIERS Proceedings, Guangzhou, China, August 25 28, 2014 Analysis of Immunity by RF Wireless Communication Signals Hongsik Keum 1, Jungyu Yang 2, and Heung-Gyoon Ryu 3 1 EletroMagneticwave Technology
1+1 PROTECTION WITHOUT RELAYS USING IDT82V2044/48/48L & IDT82V2054/58/58L HITLESS PROTECTION SWITCHING
1+1 PROTECTION WITHOUT RELAYS USING IDT82V2044/48/48L & IDT82V2054/58/58L APPLICATION NOTE AN-357 1.0 INTRODUCTION In today's highly competitive market, high quality of service, QOS, and reliability is
PE310G4BPi40-T Quad port Copper 10 Gigabit Ethernet PCI Express Bypass Server Intel based
PE310G4BPi40-T Quad port Copper 10 Gigabit Ethernet PCI Express Bypass Server Intel based Description Silicom s quad port Copper 10 Gigabit Ethernet Bypass server adapter is a PCI-Express X8 network interface
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
Foxboro Evo Process Automation System
Foxboro Evo Process Automation System Product Specifications PSS 31H-2Z32 FBM232 Field Device System Integrator Module, 10/100 Mbps Ethernet, Single The FBM232 Field Device System Integrator (FDSI) module
Cond-IS RF Conducted Immunity System
Cond-IS RF Conducted Immunity System About RF Conducted Immunity In the global contest of EMC testing for residential and industrial EUTs (Equipments Under Test) RF Conducted Immunity compliance verification
Application Note: Spread Spectrum Oscillators Reduce EMI for High Speed Digital Systems
Application Note: Spread Spectrum Oscillators Reduce EMI for High Speed Digital Systems Introduction to Electro-magnetic Interference Design engineers seek to minimize harmful interference between components,
How to Self-Certify For the CE Mark A Quick Start Guide by Dennis King - EMI Test Lab
How to Self-Certify For the CE Mark A Quick Start Guide by Dennis King - EMI Test Lab For questions and details contact Dennis at dennis@emitestlab.com Introduction The CE mark (an acronym for the French
Espotel Test Laboratory Services. November 20, 2014
Espotel Test Laboratory Services November 20, 2014 Espotel Laboratory Services EMC, ESD, RF testing EMC chamber for radiated emissions and immunity testing Radiated interoperability for LTE, GSM/3G, WLAN
Electromagnetic Compatibility Test Report. DC DC umodule Regulator LTM4613
Report No.: 0000091428 31160742.001 Page 1 of 36 Electromagnetic Compatibility Test Report Prepared in accordance with EN 55022: 2006, +A1: 2007 On DC DC umodule Regulator LTM4613 For Linear Technology
IEEE Electromagnetic Compatibility Standards (Active & Archive) Collection: VuSpec
IEEE Electromagnetic Compatibility Standards (Active & Archive) Collection: VuSpec This value-packed VuSpec CD-ROM represents the most complete resource available for professional engineers looking for
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
PRODUCT DATA SHEET AUDIO LINE COMBINATION ALC0300-1300
PRODUCT DATA SHEET AUDIO LINE COMBINATION ALC0300-1300 SCOPE These technical specifications describes the functionalities and features of the Anaview Audio Line Combination ALC0300-1300, an integrated
Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac, > 89.0% @ 230Vac NEC Class
Evaluating Cell Phone and Personal Communications Equipment and their EMC Effects on Automotive Audio and In-Cabin Modules
Evaluating Cell Phone and Personal Communications Equipment and their EMC Effects on Automotive Audio and In-Cabin Modules Craig W. Fanning Elite Electronic Engineering, Inc. 1516 Centre Circle Downers
Agilent N8973A, N8974A, N8975A NFA Series Noise Figure Analyzers. Data Sheet
Agilent N8973A, N8974A, N8975A NFA Series Noise Figure Analyzers Data Sheet Specifications Specifications are only valid for the stated operating frequency, and apply over 0 C to +55 C unless otherwise
AVX EMI SOLUTIONS Ron Demcko, Fellow of AVX Corporation Chris Mello, Principal Engineer, AVX Corporation Brian Ward, Business Manager, AVX Corporation
AVX EMI SOLUTIONS Ron Demcko, Fellow of AVX Corporation Chris Mello, Principal Engineer, AVX Corporation Brian Ward, Business Manager, AVX Corporation Abstract EMC compatibility is becoming a key design
Jens-EMC ApS. Randersvej 6 DK-8600 Silkeborg Denmark. EMC test report 2010-01-11-SeaCom. AC48/SeaCom1000 & AC128/SeaCom2100
Jens-EMC ApS Randersvej 6 DK-8600 Silkeborg Denmark Test lab (+45) 86 84 91 66 Mobile(+45) 40 10 90 33 jko@jens-emc.dk www.jens-emc.dk CVR 27 21 47 62 EMC Consultancy EMC test report 2010-01-11-SeaCom
Analog signal converters CC-E I/I Current / current isolators
ata sheet Analog signal converters CC-E I/I Current / current isolators The CC-E I/I is an isolator for the electrical isolation of current signals without auxiliary supply. It allows the isolation between
Automotive Electronics Council Component Technical Committee
AEC - Q101-005 - REV- ATTACHMENT 5 AEC - Q101-005 Rev- CAPACITIVE DISCHARGE MODEL (CDM) ELECTROSTATIC DISCHARGE (ESD) TEST METHOD - 005 DISCRETE COMPONENT CHARGED DEVICE MODEL (CDM) ELECTROSTATIC DISCHARGE
ELDAŞ Elektrik Elektronik Sanayi ve Tic.A.Ş.
Page: 2/91 Sincan 06935 - ANKARA /TURKEY CONTENTS Page No: Contents: 2-3 Test Standards: 4 List of Test Equipment: 5 Short Description of EUT: 6 Inspection Checklist 7-8 Percentage Error Limits Test (Active)
Report No. 091028R-RFCEP02V01. Test Report. MS-6633, VS12489, NetOn AP1900. Transmitter Module. MSI / MS-6894
Test Report Product Name All in one PC Model No. Transmitter Module. MSI / MS-6894 MS-6633, VS12489, NetOn AP1900 Applicant Address MICRO-STAR INT L Co., LTD. No. 69, Li-De St., Jung-He City, Taipei Hsien,
Single-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window
Power-monitoring unit PowerLogic System. Technical data sheet. Power Meter Series 800
Power-monitoring unit PowerLogic System Technical data sheet 2003 Power Meter Series 800 Function and characteristics PB100313 The PowerLogic Power Meter Series 800 offers all the high-performance measurement