LAB 1 TECHNICAL DOC 3 IN ONE LAB DEVICE. Velleman Legen Heirweg Gavere Belgium

Transcription

1 LAB 1 TECHNICAL DOC 3 IN ONE LAB DEVICE Velleman Legen Heirweg Gavere Belgium

2 SPECIFICATIONS DIGITAL MULTIMETER 3 1/2 backlit LCD Automatic polarity indication DC voltage 200mV to 600V in 5 steps AC voltage 200V and 600V DC current 200uA to 10A in 5 steps Resistance test 200ohm to 2Mohm Diode, transistor and continuity tester Data Hold function and buzzer CATI 600V CATII 300V REGULATED POWER SUPPLY Selectable output voltages: Vdc Output 1.5A (2A peak) LED overload indication With output on/off switch Very low ripple LED power indication SOLDERING STATION Low-voltage iron: 24V Ceramic 48W heating element with temperature sensor Temperature range: OFF C Low voltage iron : 24V Lead free soldering compatible Velleman page 2

3 Part No Description LAB-P01 Main enclosure part (*) LAB-P02 LAB-P03 LAB-PM01 LAB-P06 LAB-P07 LAB-M01 LAB-M04 LAB-M02 LAB-M03 LAB-P08 LAB-P04 LAB-P05 LAB-F01 Main enclosure bottom part Mains connector support Alu heat sink plate Power supply front panel Power supply turning knob Multimeter front panel Multimeter display window Multimeter turning knob Multimeter hold knob Multimeter battery holder Soldering iron support Soldering station knob Fire proof sponge tray for soldering station LAB1SCS LAB1STD LAB1SOLE BITC10N1 LAB1SPNG Soldering Iron (grey + red rubber) Soldering stand Electronics + transformer Spare Bit Sponge LAB1DMM Multimeter PCB assembly + connectors LAB1PWR Power supply PCB + transformer + connectors 6LR61 LAB1TSTL HLAB1(V)-1 9V battery Test leads for multimeter (straight type) Manual (*V = Voltcraft version) LAB1BOX(V) Carton Box for packaging + foam blocks (*) (*) Voltcraft printing version for LAB1V Velleman page 3

4 Declaration of Conformity We, Manufacturer Velleman Legen Heirweg Gavere Belgium declare that the product LAB1-3 in one LAB device if used according the instructions included with the unit meet the directives in accordance with 89/336/EEC-EMC 73/23 EEC Directive and EN Electromagnetic compatibility - Emission (CISPR22 level) IEC Electromagnetic Compatibility - Generic immunity standard EFT IEC Low voltage directive 73/25/EG - Insulation IEC Safety requirements for equipment for measurement, control and laboratory use IEC Electromagnetic Compatibility - General immunity standard ESD For the manufacturer Date: 03/06/2005 Signature: Name: Stephan Santens R&D manager Velleman page 4

5 DIAGRAMS Velleman page 5

6 MAINS SUPPLY BLOCK DIAGRAM TRANSFORMER SOLDERING STATION SECTION TRANSFORMER DC SUPPLY SECTION DMM BACKLIGHT 9V BATTERY DMM SECTION Velleman page 6

7 Power supply Velleman page 7

8 Soldering station Velleman page 8

9 Multimeter part 1 Velleman page 9

10 Multimeter part 2 Velleman page 10

11 CE - TEST RESULTS Velleman page 11

12 Radiated disturbance Field MR EUT: LAB1 (Prototype) Manufacturer: Velleman ( Witness S.Santens) Operating Condition: Normal Test Site: ESM EMC centre Operator: Meuleman Hendrik Test Specification: CISPR22 / EN55022 Class B Comment: Pré-compliance Power supply connected with Multimeter Start of Test: 1/06/2005 / 9:31:01 SCAN TABLE: "CISPR22 Field" Short Description: CISPR22 Field Strength Start Stop Step Detector Meas. IF Transducer Frequency Width Time Bandw MHz 1.0 GHz 80.0 khz QuasiPeak 10.0 ms 120 khz CBL61113M Velleman page 12

13 Company Name: Report No.: Test Report EFT (Electrical Fast Transient) ESM Engineering Services & Marketing EMC lab MR Date of test: June , 10:22 Tester: Customer: E. U. T.: LAB 1 Meuleman Hendrik Velleman S.Santens Standard used: IEC (2004) Application: Ambient Temperature: Power Supply AC 23.2 C Humidity: 49% Pressure: Note: T e s t R e s u l t 1012hPa Pré-compliance Result: Test passed! Class A result Velleman page 13

14 D. U. T Name: LAB 1 Serial Number: Operation Mode: Connection: Description: Prototype DMM on Reading Supp AC 220 V 50 Hz Soldering iron ; DC Poser supply ; DMM T e s t P r o c e d u r e Pulse Name: IEC (2004) : Part 4 (100kHz) Test generator: EFT500 Software No.: Serial No.: Coupling network: CNI501 Serial No.: T e s t S e t u p V: 1000 V f: 100 khz td: 0.8 ms tr: 300 ms Mode: Polarity: Asynchronous Alternate Coupling: L, N, PE, L+N, L+PE, N+PE, L+N+PE Test duration: 1 m Time between Tests: 2 s T e s t R e s u l t V: ±1000 V f: 100 khz td: 0.8 ms tr: 300 ms Coupling: L, N, PE, L+N, L+PE, N+PE, L+N+PE Elapsed Test time: 1 m Result: Test passed! Class A result Velleman page 14

15 Company Name: ESM Engineering Services & Marketing EMC lab Report No.: MR Date of test: June , 10:06 Tester: Meuleman Hendrik Customer: Velleman S.Santens E. U. T.: LAB 1 Standard used: IEC (2004) Application: Power Supply AC Ambient Temperature: 23.2 C Humidity: 49% Pressure: 1012hPa T e s t R e s u l t Result: Test passed! Class A result Velleman page 15

16 D. U. T Name: LAB 1 Serial Number: Operation Mode: Connection: Description: Prototype DMM on Reading Supp AC 220 V 50 Hz Soldering iron ; DC Poser supply ; DMM T e s t P r o c e d u r e Pulse Name: IEC (2004) : Part 4 (5kHz) Test generator: EFT500 Software No.: Coupling network: Serial No.: CNI501 Serial No.: T e s t S e t u p V: 1000 V f: 5 khz td: 15 ms tr: 300 ms Mode: Polarity: Asynchronous Alternate Coupling: L, N, PE, L+N, L+PE, N+PE, L+N+PE Test duration: 1 m Time between Tests: 2 s Velleman page 16

17 T e s t I n t e r r u p t i o n Test interrupted! Elapsed Test time: 50 s Coupling: L Display read-out DMM affected by pulses T e s t R e s u l t V: ±1000 V f: 5 khz Coupling: Elapsed Test time: L, N, PE, L+N, L+PE, N+PE, L+N+PE 1 m Result: Test passed! Class A result td: 15 ms tr: 300 ms Velleman page 17

18 Low voltage Insulation MR EUT: LAB 1 (Prototype) Manufacturer: Velleman ( Witness S.Santens) Operating Condition: Normal Test Site: ESM EMC centre Operator: Meuleman Hendrik Test Specification: IEC60065 (1998) Comment: Pré-compliance Power supply connected with Multimeter Date of Test: 1/06/2005 Short Description: Insulation resistance test 1 minute 500Vdc resistance must be > 4Mohm (reinforced insulation) Test result: 809Mohm between mains (L+N) connection and Solder iron: OK Velleman page 18

19 Low voltage Dielectric strenght MR EUT: LAB 1 (Prototype) Manufacturer: Velleman ( Witness S.Santens) Operating Condition: Normal Test Site: ESM EMC centre Operator: Meuleman Hendrik Test Specification: IEC60065 (1998) Comment: Pré-compliance Power supply connected with Multimeter Date of Test: 1/06/2005 Short Description: Dielectric strength test 1 minute Test result: 3KV between mains (L+N) connection and soldering iron: PASS 3KV between mains (L+N) connection and supply GND: PASS Velleman page 19

20 Electrostatic Discharge immunity test MR EUT: LAB 1 (Prototype) Manufacturer: Velleman ( Witness S.Santens) Operating Condition: Normal Test Site: ESM EMC centre Operator: Meuleman Hendrik Test Specification: CIE IEC Comment: Pré-compliance Power supply connected with Multimeter Date of Test: 1/06/2005 Short Description: + and - 4KV ESD, horizontal and vertical coupling RESULT: PASS Velleman page 20

21 Velleman Legen Heirweg Gavere Belgium Velleman page 21