TESTING CAPABILITIES
|
|
- Nickolas Anderson
- 7 years ago
- Views:
Transcription
1 TESTING CAPABILITIES Physical Testing Lab Filter Testing Lab Insulation Testing Lab Fire Testing Lab Analytical Testing Lab Surface Characterization Lab Wet Testing Lab IN COLLABORATION WITH
2 PHYSICAL TESTING LAB TENSILE STRENGTH TESTER 100 KN 10 KN To determine Tensile, Compression, Puncture and Elongation Properties Fabrics, Composites, Ropes, Yarn, Fibers, Belts e.t.c. ASTM D5034, ASTM D5035, ASTM D4268, ISO 10319, DIN EN ISO and customized test methods as well. WEIGHING BALANCE TEAR STRENGTH TESTER THICKNESS GAUGE To determine Weight or Mass Textiles, Foams, Composites etc Customized test method To determine Tearing force Textiles, Papers and Laminates ASTM D 1424, ASTM D 5437, DIN 53862, To determine Thickness Textiles, Foams, Composites etc ENISO-5084, & EN BURSTING STRG. TESTER SPRAY RATING TESTER STIFFNESS TESTER To determine Bursting Strength Textiles, Paper, Boards etc ASTM D 3786 To determine Water Repellancy of a material Textiles, Laminates etc AATCC 22, ISO 4920 etc. To determine Bending Length Textiles, Laminates etc ASTM D1388
3 FILTER TESTING LAB AIR PERMEABILITY TESTER CAPILLARY FLOW POROMETER To determine Air Flow Resistance Textiles, Foams and other porous materials Customized test method To determine pore sizes in the porous materials Textiles, Papers, Foams and other porous materials ASTM D 1424, ASTM D 5437, DIN 53862, EN ISO4674-2, ISO 1974, ISO 9290 etc FUEL FILTER MULTI PASS TEST RIG To determine filtration performance of a filter element, flat sheet filter media and differential pressure characteristics. Fuel Filters & Filter Media ISO OIL FILTER MULTI PASS TEST RIG To determine filtration performance of a filter element, flat sheet filter media and differential pressure characteristics. Oil Filters & Filter Media ISO & ISO 16889
4 INSULATION TESTING LAB IMPENDANCE TUBE FOR SOUND INSULATION To determine sound absorption & transmission of materials Textiles, Foams, Porous Materials etc ASTM E-1050, ASTM E-2611 & ISO THERMAL CONDUCTIVITY TESTER ELECTRICAL SURFACE RESISTIVITY TESTER To determine thermal conductivity of a material Textiles, Nonwovens and other materials ASTM C518, ISO 8301, JIS A 1412, DIN EN 12939, DIN EN and DIN EN To determine electrical surface resistivity of a material Textiles, Nonwovens and other materials DIN , DIN EN & DIN EN
5 FIRE TESTING LAB VERTICAL FLAMMABILITY TESTER HORIZONTAL FLAMMABILITY TESTER To determine vertical combustion behaviour and flame spread pattern of a given material Textiles and similar materials EN ISO 6941, EN ISO etc,. To determine horizontal combustion behaviour and flame spread pattern of a given material Textiles and similar materials DIN 75200, ISO 3795 etc INCLINED FLAMMABILITY TESTER LIMITED OXYGEN INDEX To determine inclined combustion behaviour at 45 degree of a given material Textiles and similar materials ASTM D 1230, BS 2963 etc., To determine minimum concentration of oxygen that will support flaming combustion of Textiles in a glowing mixture of oxygen and nitrogen Textiles and similar materials ASTM D-2863
6 ANALYTICAL TESTING LAB FSEM WITH EDS WIDE ANGLE XRAY DIFFRACTION To determine surface morphology & elemental analysis Textiles, Composites & other materials To determine phase identification of a crystalline material All crystalline materials SIMULTANEOUS DSC & TGA UV SPECTROSCOPY FTIR To characterize the thermo physical properties of a polymer Organic and In-organic materials For determination of different analytes, such as transition metal ions, highly conjugated organic compounds and biological macro-molecules. All appropriate materials To obtain an infra spectrum of absorption, emission, photo conductivity of a solid, liquid or gas. (Chemical group identification) All polymeric materials UV - WEATHEROMETER To study the accelerated life testing of materials under UV exposure Appropriate materials STANDARDS: AATCC TM16, AATCC TM169, ASTM C1442, ASTM D3424 and many more. UV TRANSMITTANCE ANALYSER To determine UV resistance of a material Textiles and other materials STANDARDS: AS/NZS 4399:1996, EN :2002, AATCC 183:2010 HYDRO HEAD TESTER To determine water flow resistance of a material Plastics, Textiles and other materials STANDARDS: ATCC 127, ASTM F 1670, BS 2823, DIN 53886, EN 1734, EN 20811, FZ/T &others
7 WET TESTING LAB zzzzz PH METER zzzzzzzzzzzzzzzzzzzzzzs HOT PLATE & MAGNETIC STIRRER OVEN To determine the concentration of Hydrogen ions in an aqueous solution. For homogenous stirring of solution Used for sterilization and sample preparation and drying. CONDITIONING CHAMBER zzzzzzzzzzzzzzzzzzzzzzs LAUNDROMETER VISCOMETER For the conditioning of samples prior to testing, provides conditions from 20% to 98% RH ± 2 and 0 C to 94 C ± 0.5 C. To determine wash fastness of a given material STANDARDS: AATCC61, ISO 105 etc,. To determine the viscosity of a given solution FOGGING TESTER To determine the fogging characteristics evaluation of volatile constituents of decorating materials used in cars and aircrafts, Textiles, Leather, Foams and other materials. STANDARDS: ISO 6452, DIN 75201, SAE J1756, QB/T 2728, BS EN 14288, PV 3920, PV 3015, ES-X83231, NES M0161, D , GM 9305P, TSM 0503G
8 SURFACE CHARACTERIZATION TESTING LAB PROCESS TENSIOMETER WET SCRUB ABRASION TESTER To determine wear resistance of surface coatings Textiles, Ceramics and other materials STANDARDS: ASTM D2486, D 3450, D 4213, D 4828 & ISO To determine wear resistance of surface coatings Textiles, Ceramics and other materials STANDARDS: ASTM D2486, D 3450, D 4213, D 4828 & ISO MARTINDALE ABRASION TESTER TABER ABRASION TESTER To determine wear resistance of surface coatings Textiles, Ceramics and other materials STANDARDS: ASTM D2486, D 3450, D 4213, D 4828 & ISO To determine abrasion resistance of materials Textiles, Coatings and other materials STANDARDS: ASTM D3389, ASTM D4685 and more. CONTACT DETAILS Address: PSG Techs COE INDUTECH, PSG itech Campus, Avinashi Road, Neelambur, Coimbatore testing.int@gapps.psgtech.ac.in Ph: No: , / Fax: Website:
VISCOSE FIBRES WITH NEW FUNCTIONAL QUALITIES
VISCOSE FIBRES WITH NEW FUNCTIONAL QUALITIES Walter Roggenstein Kelheim Fibres GmbH, Regensburger Str. 109, 93309 Kelheim, Germany Phone: (+49) 9441 99-489; Fax: (+49) 9441 99-1489; Email: walter.roggenstein@kelheim-fibres.com
More informationMaxCell Technical Manual Design Parameters
MaxCell Technical Manual Design Parameters Breaking Strength by Product Style, lbs Product Style Standard MaxCell Fire Resistant MaxCell Test Method 4 Cell 2,750 2,200 ASTM D 5 Bellcore 5 5.. Cell 2,50
More informationOIL CONDITION MONITORING: AUTOMOTIVE ANALYSIS
OIL CONDITION MONITORING: AUTOMOTIVE ANALYSIS Why Analyse Lubricants? With increasing costs and tighter deadlines, the need for effective maintenance strategies is greater than ever before. So why not
More informationTHERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST
THERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST Instruction: Check each test method for which you are requesting accreditation. An asterisk beside the NVLAP Test Method Code indicates that proficiency
More informationMARTIN TESTING LABORATORIES (MTL) PAINTS AND COATINGS TESTING CAPABILITIES
Liquid Coating Properties Composition VOC Content, ASTM D2369 Water Content, ASTM D4017 Physical Properties Calculating Physical Constants of Coatings, ASTM D5201 Density, ASTM D1475 Flash Point, ASTM
More informationNON-WOVEN COMPOSITE OFFICE PANEL
NON-WOVEN COMPOSITE OFFICE PANEL Patent Number: US7871947 Publication date: 2011-01-18 Applicant(s): Milliken Provided herein is a non-stratified, or homogeneous, non-woven composite having (a) strength-imparting
More informationNaue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
More informationDubai Municipality Standard DMS 1: Part 5: 2004
Specification for precast concrete blocks Part 5: Normal-weight concrete-polystyrene sandwich masonry blocks Issue Date Revision Revision Description Prepared by Approved by Authorized by 19/12/2004 Issue
More informationAnnex of the certificate (Page 1/6) Accreditation Scope
As a Testing Laboratory Annex of the certificate (Page 1/6) Accreditation Scope Address: Küçük Çiğli Mh. 8780/1 Sk. No:5 Çiğli 35681 İZMİR / TÜRKİYE Phone : 0 232 376 24 25 Fax : 0 232 386 33 98 E-Mail
More information4. Cryogenic gloves are generally designed to protect the hands from intense cold or heat.
PROTECTIVE GLOVES In many University laboratories, exposure to chemicals, infectious agents, sharp objects, extreme temperatures and other hazards can create a potential for injury to the hand. Wherever
More informationNomex KD Technology. DuPont TM. DuPont s Heritage in Hot Gas Filtration Application. For over 4 decades, a filter media made of Nomex
DuPont s Heritage in Hot Gas Filtration Application For over 4 decades, a filter media made of Nomex brand fibre has been considered as the state of the art product in typical filtration applications such
More informationSpecial Claims Seminar
Special Claims Seminar Agenda Truth In Labeling Review Special Claims Examples of Hang Tags 2 Importance of Special Claims Traditional textiles are no longer competitive Consumers are demanding more function
More informationSTAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM Installed in Pre-engineered Steel Buildings Provides Lowest Cost Construction Method for CORROSIVE AND WET Environments PREFERRED SOLUTIONS, INC.
More informationStudy on flame retardant properties of poly(lactic acid) fibre fabrics
Indian Journal of Fibre & Textile Research Vol. 39, September 2014, pp. 268-273 Study on flame retardant properties of poly(lactic acid) fibre fabrics M S Parmar a, Maheshwar Singh, Rajiv Kumar Tiwari
More informationWelding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E)
Welding of Plastics Amit Mukund Joshi (B.E Mechanical, A.M.I.Prod.E) Introduction Mechanical fasteners, adhesives, and welding processes can all be employed to form joints between engineering plastics.
More informationEffect of Lycra Extension Percent on Single Jersey Knitted Fabric Properties
Effect of Lycra Extension Percent on Single Jersey Knitted Fabric Properties R. Sadek, A. M. El-Hossini, A. S. Eldeeb, A.A. Yassen Mansoura University, Textile Engineering Department, Mansoura, EGYPT Correspondence
More informationSILICONE RUBBER: THE DEFINITIVE GUIDE WHITE PAPER
SILICONE RUBBER: THE DEFINITIVE GUIDE WHITE PAPER February 2014 Executive Summary J-Flex has created this comprehensive Guide to Silicone Rubber to be used as a valuable resource for all those working
More informationEUROPEAN STANDARDS PERSONAL PROTECTIVE CLOTHING FOR FLAME RESISTANT. Alexander Gstettner, Lenzing AG Austria
EUROPEAN STANDARDS FOR FLAME RESISTANT PERSONAL PROTECTIVE CLOTHING Alexander Gstettner, Lenzing AG Austria W a t e r How are the standards organized? A 1 Testing Methods Standards specifiying performance
More informationIUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS
IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS INTRODUCTION Each REACH registrant is required to file its
More informationEUROPEAN STANDARDS AND MARKINGS FOR HAND AND ARM PROTECTION
APPENDIX 5 EUROPEAN STANDARDS AND MARKINGS FOR HAND AND ARM PROTECTION ISSUE 8: January 2013 This information is extracted from British Standards with the permission of BSI under licence number PD\1998
More informationnature invented packaging. We improved it. DuPont Tyvek PROTECTIVE PACKAGING
nature invented packaging. We improved it. DuPont Tyvek PROTECTIVE PACKAGING Why Tyvek? Since its discovery back in 1955, DuPont TM Tyvek has been used in various sectors for a wide range of purposes.
More informationKinematic viscometers in accordance with ISO 3105, DIN 51562, ASTM D445 For automatic and manual viscosity measuring Greatest precision and durability
T h e r i g h t t e m p e r a t u r e w o r l d w i d e Kinematic viscometers in accordance with ISO 3105, DIN 51562, ASTM D445 For automatic and manual viscosity measuring Greatest precision and durability
More informationSpecifications, Product Testing and Terminology
Specifications, Product Testing and Terminology The following synopsis provides a review of various material and final product testing, which is performed on our products, as well as, many of our competitors.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MGA RESEARCH CORPORATION 820 Suburban Park Drive Greer, SC 29651 Jennifer Young Phone: (864) 848-3088 Website: www.mgaresearch.com MECHANICAL Valid Until: May
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS TESTING TECHNOLOGY (SHENZHEN) CO., LTD. 4/F, Building #3 Runheng Electronic Park Luxian Road 2 nd Road, Xin an Street, Bao an District Shenzhen City,
More informationAnalytical Testing Services Commercial Price List ManTech International Corporation January 2016
Analytical ing Services Commercial List ManTech International Corporation January 2016 TABLE OF CONTENTS MECHANICAL TENSILE TESTING... 1 DIFFERENTIAL SCANNING CALORIMETRY (DSC)... 2 THERMOMECHANICAL ANALYSIS
More informationAustin Peay State University Department of Chemistry CHEM 1111. Empirical Formula of a Compound
Cautions Magnesium ribbon is flammable. Nitric acid (HNO 3 ) is toxic, corrosive and contact with eyes or skin may cause severe burns. Ammonia gas (NH 3 ) is toxic and harmful. Hot ceramic crucibles and
More informationConstruction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationVeMet, Utrecht, NL «Solution in Wear Protection» 26.10.2011 Dipl.-Ing. Wolfgang Leichnitz. Quit
VeMet, Utrecht, NL «Solution in Wear Protection» 26.10.2011 Dipl.-Ing. Wolfgang Leichnitz Quit Theory and Practice of Wear Definition In materials science, wear is the erosion of material from a solid
More informationUnderstanding BS EN 771-3: Aggregate concrete masonry units
60 Charles Street, Leicester LE1 1FB Tel: 0116 253 6161 Fax: 0116 251 4568 Email: enquiries@cba-blocks.org.uk Website: www.cba-blocks.org.uk February 2006 Understanding BS EN 771-3: Aggregate concrete
More informationPLASMA TECHNOLOGY OVERVIEW
PLASMA TECHNOLOGY OVERVIEW Plasmas are not a lab curiosity. Plasma processing has been an essential production tool for more than 30 years in the fabrication of microelectronic devices for example. Over
More informationInterested in conducting your own webinar? Email webinars@bnpmedia.com
Interested in conducting your own webinar? Email webinars@bnpmedia.com IR Applications in the Real World Archive www.process-heating.com Add to your favorites IR Applications in the Real World What it
More informationGeneral Chemistry I (FC, 09-10) Lab #3: The Empirical Formula of a Compound. Introduction
General Chemistry I (FC, 09-10) Introduction A look at the mass relationships in chemistry reveals little order or sense. The ratio of the masses of the elements in a compound, while constant, does not
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
More information07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying
More informationCERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
More informationStandard Test Procedures Manual
STP 206-4 Standard Test Procedures Manual Section: 1. SCOPE 1.1. Description of Test This method describes the procedure for determining the liquid limit, plastic limit and the plasticity index of coarse-grained
More informationCNG & Hydrogen Tank Safety, R&D, and Testing
> Powertech Labs Inc. CNG & Hydrogen Tank Safety, R&D, and Testing 012.10.2009 Presented by Joe Wong, P.Eng. PRESENTATION OBJECTIVES Present experience from CNG in-service tank performance. The process
More informationAnnex to the Accreditation Certificate D PL 17640 01 00 according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 17640 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 05.06.2015 to 04.11.2018 Holder of certificate: Haltermann
More informationOil Analysis. It is important that the sampling be done in the following manner: 1.
Oil Analysis Introduction Oil analysis was originally used by the military and the railroad as a preventative maintenance program. It has expanded today to the fi eld of study called Tribology. Oil analysis
More informationGENERAL GUIDELINES AND TECHNICAL SPECIFICATIONS OF UNIFORM FABRICS FOR MGVCL EMPOLYEES FOR BLOCK YEAR 2011-2013
/ GENERAL GUIDELINES AND TECHNICAL SPECIFICATIONS OF UNIFORM FABRICS FOR MGVCL EMPOLYEES FOR BLOCK YEAR 2011-2013 MADHYA GUJARAT VIJ COMPANY LTD. REGISTERED OFFICE: SARDAR PATEL VIDYUT BHAVAN, RACE COURSE,
More informationComposite Materials. Mary P. Shafer. Fabric Development, Inc. Quakertown, PA 18951
Composite Materials Mary P. Shafer Fabric Development, Inc. Quakertown, PA 18951 Composite Material Two inherently different materials that when combined together produce a material with properties that
More informationTAIYO PSR-4000 AUS703
TAIYO PSR-4000 AUS703 LIQUID PHOTOIMAGEABLE SOLDER MASK Designed for Flip Chip Packaging Applications Halogen-Free (300ppm) Excellent Thermal and Crack Resistance Low Water Absorption RoHS Compliant Excellent
More informationNorth American Stainless
Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,
More informationA H M 531 Penetration & Ring & Ball & Ductility & Flash & Fire point By: Mu'men Al-Otoom
The Civil Engineering Center 1 Visit www.ahm531.com for more lecture notes and E-book! The Civil Engineering Center 2 Visit www.ahm531.com for more lecture notes and E-book! Introduction : The grades of
More informationSecondary Containment Comparison ATI Ultra COAT vs HDPE
When choosing a secondary containment system it must be chosen based on its ability to withstand long term contact with the natural elements (weather), whatever the tanks hold (unrefined oil, fuels, acids,
More informationPLEXIGLAS SUNACTIVE GS. For a Better Feeling
PLEXIGLAS SUNACTIVE GS For a Better Feeling PLEXIGLAS SUNACTIVE GS For a Better Feeling A perfect tan and a feeling of wellbeing are two important sales factors for tanning beds. To enable you to convincingly
More informationA GUIDE TO SELECTING YOUR INDUSTRIAL OVEN
A GUIDE TO SELECTING YOUR INDUSTRIAL OVEN Application 1 The first step in selecting an industrial oven is defining the required heat application that your oven will be used for. Heat processing is extensively
More informationThe Empirical Formula of a Compound
The Empirical Formula of a Compound Lab #5 Introduction A look at the mass relationships in chemistry reveals little order or sense. The ratio of the masses of the elements in a compound, while constant,
More informationRemovable Insulation Blankets from A to Z
Removable Insulation Blankets from A to Z At first glance, making up a removable insulation blanket seems somewhat simple take some insulation, put some mesh on one side, a cover on the other, sew them
More informationjoining expertise at the service of the plastic converting industry
joining expertise at the service of the plastic converting industry VKC-CENTEXBEL Etienne Sabbelaan 49 BE-8500 Kortrijk phone +32 56 29 27 00 fax +32 56 29 27 01 info@vkc.be www.vkc.be VAT BE 0459.218.289
More informationScience Standard Articulated by Grade Level Strand 5: Physical Science
Concept 1: Properties of Objects and Materials Classify objects and materials by their observable properties. Kindergarten Grade 1 Grade 2 Grade 3 Grade 4 PO 1. Identify the following observable properties
More informationAbrasive Elements and Abrasion Resistance Tests for Car Seat Upholstery
Abrasive Elements and Abrasion Resistance Tests for Car Seat Upholstery Ivona Jerkovic, Josep Maria Pallarés, Monica Ardanuy, PhD, Xavier Capdevila PhD Universitat Politècnica de Catalunya, Terrassa, Barcelona
More informationHIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS
BSW HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side
More informationPTFE Teflon Glass Fabric Grades & Material Data Sheets
PTFE Teflon Glass Fabric Grades & Material Data Sheets Taconic TAC-TAPES Taconic TAC-TAPES are constructed with high-quality adhesives and backing materials to deliver superior performance. A choice of
More informationFire Testing of Recycled Materials for Building Applications
Fire Testing of Recycled Materials for Building Applications Robert H. White Abstract To gain wide market acceptance of new building products made from recycled materials, fire testing may be necessary.
More informationPOLYVINYL ALCOHOL. SYNONYMS Vinyl alcohol polymer, PVOH, INS No. 1203 DEFINITION DESCRIPTION FUNCTIONAL USES CHARACTERISTICS
POLYVINYL ALCOHOL Prepared at the 68 th JECFA (2007) and published in FAO JECFA Monographs 4 (2007), superseding specifications prepared at the 63 rd JECFA (2004) and published in the Combined Compendium
More informationDEEPSEALSM SERVICE SOLUTIONS
DEEP WATER CHEMICAL SOLUTIONS DEEPSEALSM SERVICE SOLUTIONS (DEEP SEA ENGINEERING ASSURANCE LEADERSHIP) Solving challenges. Deepwater Solutions from Multi-Chem ABOUT HALLIBURTON Founded in 1919, Halliburton
More informationSoil Suction. Total Suction
Soil Suction Total Suction Total soil suction is defined in terms of the free energy or the relative vapor pressure (relative humidity) of the soil moisture. Ψ = v RT ln v w 0ω v u v 0 ( u ) u = partial
More informationBuzziBlinds Product Specification Sheet
BuzziBlinds Product Specification Sheet This document contains technical information about the BuzziBlinds www.buzzi.space Acoustical performance and privacy with a twist After the introduction in 2011
More informationTECHNICAL DATA SHEET
EPOXY - NG1001 Formulated Resin System for Pre-preg Process General information Description: TECHNICAL DATA SHEET EPOXY - NG1001 is a formulated epoxy based resin system for hot melt pre-preg and pressure
More informationDrainage Composites. The ready-made solution to sub soil drainage
Drainage Composites The ready-made solution to sub soil drainage The Ready-Made Solution to Sub Soil Drainage Drainage Composites are prefabricated subsurface-drainage products which directly replace conventional
More information2. The mold is closed up and held under hydraulic pressure while the rubber material or compound cures.
Designing with Rubber Molding Processes Compression Molding Compression molding is the process of placing a pre-load of a rubber material or compound directly in the mold cavity and compressed to the shape
More informationHFM Heat Flow Meter Thermal Conductivity Analyzer
HFM Heat Flow Meter Thermal Conductivity Analyzer Introduction An insulating material is a material with low thermal conductivity, which in the construction industry, equipment manufacturing, or the production
More informationEXPERIMENT 7 Reaction Stoichiometry and Percent Yield
EXPERIMENT 7 Reaction Stoichiometry and Percent Yield INTRODUCTION Stoichiometry calculations are about calculating the amounts of substances that react and form in a chemical reaction. The word stoichiometry
More informationEnclosure to Accreditation Certificate D-PL-14115-11-00 according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Enclosure to Accreditation Certificate D-PL-14115-11-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: from 24/03/2015 to 23/03/2020 Date of issue: 24/03/2015
More informationDOW ECOLIBRIUM Bio-Based Plasticizers - Greening of PVC with Renewably Sourced Plasticizers
DOW ECOLIBRIUM Bio-Based Plasticizers - Greening of PVC with Renewably Sourced Plasticizers Bharat I. Chaudhary R. Eaton, B. Sczekalla, C. Laufer, B. Neese, A. Ghosh-Dastidar The Dow Chemical Company Outline
More informationHow To Test For Premer Retardant
TEST REPORT NEBS COMPLIANCE CHOMERICS PREMIER CONDUCTIVE PLASTIC Prepared by: CHOMERICS R&D 84 DRAGON COURT WOBURN, MA 01801 Test Report Number: TR 1007 EN 0206 Chomerics Approved Signatory: This report
More informationEUROPEAN STANDARDS AND MARKINGS FOR PROTECTIVE CLOTHING
APPENDIX 7 EUROPEAN STANDARDS AND MARKINGS FOR PROTECTIVE CLOTHING ISSUE 8: January 2013 This information is extracted from British Standards with the permission of BSI under licence number PD\1998 1367
More informationPierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013
Pierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013 Agenda Dubuc works: location and overview MMC fabrication process at Rio Tinto Alcan Boralcan product caracteristics
More informationHyLife TM HVAC Line Corrosion testing. Precision Tubing Technology Centre, 2012
Precision Tubing Technology Centre, 2012 Background: There is an increasing interest in the use of aluminium tubes for connecting lines for residential HVACR applications Connecting lines are often covered
More informationConductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice.
CMOS Processing Technology Silicon: a semiconductor with resistance between that of conductor and an insulator. Conductivity of silicon can be changed several orders of magnitude by introducing impurity
More informationAbuse Testing of Lithium Ion Cells: Internal Short Circuit, Accelerated Rate Calorimetry and Nail Penetration in Large Cells (1-20 Ah)
Abuse Testing of Lithium Ion Cells: Internal Short Circuit, Accelerated Rate Calorimetry and Nail Penetration in Large Cells (1-20 Ah) Battery Safety 2011, Nov 9-10, Las Vegas, NV Ann Edwards, PhD Kirby
More informationPhysical Dry Conditioned Unit Test method
Technical Data Sheet Ixef 1022 Ixef 1022 is a 50% glass-fiber reinforced, general purpose compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance.
More informationFLAMMABILITY REQUIREMENTS FOR 25.853-1 AIRCRAFT SEAT CUSHIONS
FLAMMABILITY REQUIREMENTS FOR 25.853-1 AIRCRAFT SEAT CUSHIONS ANM-110 1. PURPOSE. This Advisory Circular (AC) provides guidance material for demonstrating compliance with the Federal Aviation Regulations
More informationGlobal Hybrid Roofing Solutions (Delaware) LLC
Global Hybrid Roofing Solutions (Delaware) LLC Product ing Summary Distributed by: BEST MATERIALS LLC Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 Email: sales@bestmaterials.com www.bestmaterials.com
More informationWhat Boat Captains and Marine Surveyors Should Know about Oils and Oil Analysis
What Boat Captains and Marine Surveyors Should Know about Oils and Oil Analysis Tom Johnson, President/Co-Founder JG LUBRICANT SERVICES, LLC Affiliate Member, Society of Accredited Marine Surveyors (SAMS)
More informationXFA 600 Thermal Diffusivity Thermal Conductivity
XFA 600 Thermal Diffusivity Thermal Conductivity Thermal Diffusivity, Thermal Conductivity Information of the thermo physical properties of materials and heat transfer optimization of final products is
More informationOverview of Filtration Media Classes, Their Properties, and Applications in Which They Excel
Overview of Filtration Media Classes, Their Properties, and Applications in Which They Excel Dr. Heath Himstedt John Simenson Johns Manville Next Generation Filter Media Conference American Filtration
More informationRadiation Curable Components and Their use in Hard, Scratch Resistant Coating Applications
Radiation Curable Components and Their use in Hard, Scratch Resistant Coating Applications William Schaeffer Steven Tyson Indu Vappala Robert Kensicki Sartomer USA, LLC 502 Thomas Jones Way Exton, PA 19343
More informationConstruction. SikaProof A-08 Edge, A-12 Edge. Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing system. Product Description
Product Data Sheet Edition 15/10/2014 Identification no: 02 07 04 10 300 0 000002 SikaProof A Edge SikaProof A-08 Edge, A-12 Edge Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing
More informationSTANDARD SPECIFICATION. for. Plumbing, Heating, Hot Water, Cold Water & Electrical work. Sussex Lodge London W2 & 16 Stanhope Terrace London W2
STANDARD for Plumbing, Heating, Hot Water, Cold Water & Electrical work undertaken by owners within the building known as Sussex Lodge London W2 & 16 Stanhope Terrace London W2 BPME Consulting Engineers
More informationApplications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT)
I Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT) Table of Content 1 Introduction...1 2 Improved Properties...1 3 Potential Applications...1 3.1 Current / short-term applications...3
More informationSECTION 15190 HVAC INSULATION. A. All work specified in this Section is subject to the provisions of Section 15010.
SECTION 15190 HVAC INSULATION PART ONE - GENERAL PART 1 - GENERAL 1.01 DESCRIPTION A. All work specified in this Section is subject to the provisions of Section 15010. B. All insulation products shall
More informationExperiment 12- Classification of Matter Experiment
Experiment 12- Classification of Matter Experiment Matter can be classified into two groups: mixtures and pure substances. Mixtures are the most common form of matter and consist of mixtures of pure substances.
More informationWELDING & CUTTING MAIN EQUIPMENT
GASES DIVISION GAS WELDING & CUTTING EQUIPMENT WELDING & CUTTING MAIN EQUIPMENT GAS WELDING & CUTTING KIT The MARIGASES GAS WELDING AND CUTTING KIT is a high quality set containing all the tools and components
More informationPneumatic Tires. Specialist Tires for Maximum Efficiency
Pneumatic Tires Specialist Tires for Maximum Efficiency Radial Pneumatic Tires from Continental Continental Industrial Pneumatic Tires provide comfort on all surfaces and therefore offer the protection
More informationRACQUETBALL, HANDBALL OR SQUASH COURTS AND GYMNASIUM WALL SURFACES
1807 Elmwood Avenue, Suite 275 Buffalo, New York 14207 (800) 543-5155 RACQUETBALL, HANDBALL OR SQUASH COURTS AND GYMNASIUM WALL SURFACES Fiberesin Wall System Provide materials and labor to complete courts
More informationValidation of biomedical coatings
Synergy makes sence Validation of biomedical coatings MG-FSI72-108 Last revision: March 2011 5, Chemin du Catupolan - 69120 Vaulx en Velin - France - Tel. 33 (0)4 72 81 22 62 - Fax : 33 (0)4 72 81 22 72
More informationPortable petrol storage containers
Portable petrol storage containers The Petroleum (Consolidation) Regulations 2014 (PCR), which came into force on 1 October 2014, apply to the following: workplaces that store petrol where petrol is dispensed,
More informationTest report P 7013-E. InoPaz H2O. Pazkar LTD. Alon Tavor Industrial Zone AFULA 18000 / Israel. J. Magner Dipl.-Ing. N. Machill.
Kiwa Polymer Institut GmbH Quellenstraße 3 65439 Flörsheim-Wicker Tel. +49 (0)61 45-5 97 10 Fax +49 (0)61 45-5 97 19 www.kiwa.de Test report P 7013-E Testing order: Test of the waterproofing system based
More informationENERGY. TECSUN DUO (PV) Twin Cables for Photovoltaics
ENERGY TECSUN DUO (PV) Twin Cables for Photovoltaics Auswahlkriterien Manufacturer Trademark Approvals Application Prysmian Kabel und Systeme GmbH Kabel- und Leitungswerk Neustadt bei Coburg / Germany
More informationHome Product Testing
Intertek s global reach is our major strength linking suppliers in one part of the world with buyers in another. We independently inspect factories and goods in the countries of origin across the whole
More informationRECITATION NOTES FOR EXPERIMENT # 5 A&B THIN LAYER CHROMATOGRAPHY
RECITATION NOTES FOR EXPERIMENT # 5 A&B THIN LAYER CHROMATOGRAPHY Have your lab textbook available for quick reference to specific pages, indicated in red. BASIC PRINCIPLES OF CHROMATOGRAPHY Chromatography
More informationCABLE 101. The Basics of Wire & Cable. Copyright 2007, Belden Inc.
CABLE 101 The Basics of Wire & Cable Copyright 2007, Belden Inc. KEY TERMS Insulations Jacket Capacitance Attenuation Velocity of propagation Dielectric strength Dielectric constant Working voltage Elongation
More informationSaeid Rahimi. Effect of Different Parameters on Depressuring Calculation Results. 01-Nov-2010. Introduction. Depressuring parameters
Effect of Different Parameters on Depressuring Calculation Results Introduction Saeid Rahimi 01-Nov-2010 Emergency depressuring facilities are utilized to accomplish at least one of the following objectives:
More informationEOSINT P and FORMIGA P materials for plastic laser-sintering systems
EOSINT P and FORMIGA P materials for plastic laser-sintering systems Contents Pages Material data overview ALUMIDE CarbonMide PA 2200/2201 PA 2210 FR PA 3200 GF PEEK HP3 PrimeCast 101 PrimePart DC 3 6
More information40 years of quality & service. SINTEPLAST, S.A. de C.V. TARPAULIN
SINTEPLAST, S.A. de C.V. TARPAULIN Econoplast Tarpaulin 9 x 6 1000 D. Specially designed for outdoor uses. Its excellent physical and mechanical proprieties make it one of the most versatile materials.
More informationInnovative value chain development for sustainable plastics in Central Europe
Work Package 3: Developing a roadmap for action from science to innovation in the value chain Goal: To elaborate a transnational roadmap for technology transfer in biodegradable plastics industry STAGE
More information