joining expertise at the service of the plastic converting industry
|
|
- Cori Hardy
- 8 years ago
- Views:
Transcription
1 joining expertise at the service of the plastic converting industry
2 VKC-CENTEXBEL Etienne Sabbelaan 49 BE-8500 Kortrijk phone fax VAT BE IBAN BE BIC GEBABEBB
3 VKC, a division of Centexbel in KORTRIJK VKC, a division of Centexbel Kortrijk Centexbel Gent Centexbel Brussels Centexbel Grâce-Hollogne TESTING LABORATORY RESEARCH CENTRE CONSULTANCY SERVICES TRAINING CENTRE POLYMER EXTRUSION PLATFORM COMPOSITE & PLASTIC PROCESSING PLATFORM
4 VKC, a division of CENTEXBEL VKC-Centexbel offers a dynamic competence centre and test laboratory to the plastic converting industry. All actors involved in the plastic converting value chain - manufacturers of raw materials and additifs, plastic converters, suppliers of processing equipment and recycling companies - are welcome to the open innovation platform and professional services of VKC-Centexbel. VKC-Centexbel provides services in the fields of material characterisation, failure analyses, product development, process and energy optimisation and new applications of plastics, virgin and recycled polymers, fibre reinforced composites, rubber, coatings, smart materials and bio-based polymers. Our strategy is focused on the following key notions: confidentiality, "creation of added value", "curiosity", "professionalism", "creativity", "service", "punctuality", "closing the cycle", "People, Planet, Profit". Thanks to its integration in Centexbel, the textile competence centre, VKC- Centexbel guarantees a cross-sector approach in an optimal research environment, where innovation is self-evident.
5 PLASTICS for the FUTURE Marc Wallican.be VKC-Centexbel actively supports and promotes the Factories for the future project, initiated by the Province of West Flanders to provide a platform aimed at structuring and optimising the offer of research and services. OUR SERVICES TO THE INDUSTRY Technological and environmental consultancy on materials, products, processes, energy, recycling Problem solving Polymer extrusion / composite & plastic processing platforms QA-CER: certification system for recycled materials Seminars, workshops and symposiums Dissemination of R&D results & publications
6 RESEARCH THEMES RESEARCH SPEARHEADS FOR SUSTAINABLE PLASTICS & COMPOSITES Bio-based polymers Extrusion, processing and functionalisation Ecological plastic processing Ecological alternatives Energy-efficient curing and functionalisation Process energy optimisation in the plastic converting industry Research, testing, consultation and audits Recycling: Identification and characterisation Optimisation Bio-based polymers Thermoplasts Controlled quality Training In the projects VKC-CENTEXBEL develops technological know-how on: MATERIALS: (bio)polymers, (nano)additives, smart materials TECHNOLOGIES: compounding, sorting, extraction TEST METHODS: chemical analyses, barrier properties, conductivity PROCESSES: production (injection moulding, extrusion, 3D printing, coating), assembling (glueing, welding) and recycling END PRODUCTS: multi-layer, foamed, fibre-reinforced, hybrid products APPLICATIONS: food, automotive, construction industries ENVIRONMENT and LEGISLATION (e.g. REACH] VKC-CENTEXBEL SUPPORTS COMPANIES IN IMPLEMENTING INNOVATIVE MATERIALS AND PROCESSES
7 TESTING A GRIP OUT OF THE TESTING VKC-CENTEXBEL Physical and mechanical testing Tensile strength and impact behaviour (products & films), resistance to scratch, abrasion deflection, etc. These tests are often carried out following the exposure of the samples to artificial weathering Artifcial weathering Accelerated simulation of the detoriating effects of sunlight [QUV-Xenon] and climatological conditions on materials. Rheology: Study of flow and deformation of materials under applied forces Melt Flow Index [MFI] Rheotens Capillary Rheology Meter Rotational Rheology Meter Thermal properties Heat Deflection Temperature [HDT] Vicat Softening Temperature [VST] Dynamic Thermo-Mechanical Analyses [DTMA] Thermogravimetric Analyses [TGA] Differential Scanning Calorimetry [DSC] Material identification X-Ray Fluoresence [XRF and µxrf] Gel Permeation Chromatography [GPC] Fourier Transformation IR spectroscopy [FTIR] GCMS, LCMS: gas & liquid chromatography [HPLC] linked with mass spectrometry Inductive Coupled Plasma Spectrometry [ICP] Microscopic analyses Stereomicroscope Scanning Electron Microscope [SEM] MORE INFORMATION AND UPDATES and
8 VKC-CENTEXBEL Etienne Sabbelaan 49 BE-8500 Kortrijk phone fax VAT BE IBAN BE BIC GEBABEBB Marc Wallican.be
Centexbel. Textile Competence Centre
Centexbel Textile Competence Centre TEXTILE COMPETENCE CENTRE At the service of the industry Centexbel Collective research and technical centre Governed by the industry Membership organisation Belgian
More informationOngoing R&D projects in COST member countries
Ongoing R&D projects in COST member countries France Institute Acronym Research Groups Ecole Supérieure du Bois, Nantes École Nationale Supérieure des Technologies et Industries du Bois, Epinal Laboratoire
More informationDevelopment of an innovative bio-based structural adhesive
Development of an innovative bio-based structural adhesive Blanca Palomo, R&D Engineer blanca.palomo@rescoll.fr RESCOLL Independent research company located in Pessac (33) specialized in technologic innovation
More informationInnovative value chain development for sustainable plastics in Central Europe
Work Package 3: Developing a roadmap for action from science to innovation in the value chain Goal: To elaborate a transnational roadmap for technology transfer in biodegradable plastics industry STAGE
More informationIUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS
IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS INTRODUCTION Each REACH registrant is required to file its
More information2015 2016 Ph.D. Science & Engineering Positions. Wilmington, DE. Analytical Sciences Wilmington, DE. Sciences Wilmington, DE.
2015 2016 Ph.D. Science & Engineering Positions 1) Synthetic Organic Chemistry Crop Protection Newark, DE 2) Polymer Chemistry Performance Polymers Various 3) Polymer Engineering Performance Polymers Various
More informationXII. 3.2 Determining Bulk Material Properties 40. 3.3 Determining the Properties of Fluids 42
Table of Contents Nomenclature (Selection) Terminology Symbols and Abbreviated Terms XXI XXIX XXXIII 1 Introduction 1 1.1 The Genesis of Polymer Testing as a Science 1 1.2 Factors Influencing Data Acquisition
More informationHow To Make A Lightweight Car
Lightweight solutions Multi-material constructions Flanders DRIVE Index: Flanders DRIVE 1 Need for cost-efficient lightweight solutions 2 Multi-material constructions as a valuable solution 3 Our expertise
More informationLaserwelding of plastics Ir. Luc Janssen 2008
3D Laserwelding page 1 of 12 Laserwelding of plastics Ir. Luc Janssen 2008 1 Laserwelding - How it works Laserwelding is a very versatile process and is suitable for both small series and massproduction.
More informationGlossary. 3D Animation Using computer software to create and animate a three-dimensional representation of image data.
Glossary # 2D Control Drawing A line drawing showing various views of a product with details such as material, surface finish, volume, tolerances and critical dimensions. 3D Animation Using computer software
More informationwww.axon-cable.com Power distribution systems
www.axon-cable.com Power distribution systems Power distribution systems As vital components for electrical power distribution in telecommunication satellites and landbased weapon systems, the bus and
More informationCourse Contents. MS Forensic Chemistry
Course Contents MS Forensic Chemistry Year 1 Semester - I Course Code Course Title Credit Hours FCHEM-7105 Introduction to Forensic Science 3 FCHEM-7106 Crime Scene Investigation 3 FCHEM-7107 Chemistry
More informationAnalytical Testing Services Commercial Price List ManTech International Corporation January 2016
Analytical ing Services Commercial List ManTech International Corporation January 2016 TABLE OF CONTENTS MECHANICAL TENSILE TESTING... 1 DIFFERENTIAL SCANNING CALORIMETRY (DSC)... 2 THERMOMECHANICAL ANALYSIS
More informationWired for success Comprehensive compliance & performance solutions for printed wiring boards
Consumer Technology Wired for success Comprehensive compliance & performance solutions for printed wiring boards UL Consumer Technology: Supporting the success and safety of printed wiring boards (PWBs)
More informationNON-WOVEN COMPOSITE OFFICE PANEL
NON-WOVEN COMPOSITE OFFICE PANEL Patent Number: US7871947 Publication date: 2011-01-18 Applicant(s): Milliken Provided herein is a non-stratified, or homogeneous, non-woven composite having (a) strength-imparting
More informationIssued in September 2014. Innventia Research Programme 2015 2017
Issued in September 2014 Innventia Research Programme 2015 2017 Innventia Research Programme 2015 2017 The business environment of the pulp, paper and industry and their suppliers is going through radical
More informationPROCESSING OF VARIOUS MATERIALS
4 PROCESSING OF VARIOUS MATERIALS CHAPTER CONTENTS 4.1 Shaping Processes for Polymers Polymers Manufacturing Processes for Polymers 4.2 Rubber Processing Technology Processing of rubber into finished good
More informationAnalytical service charges for use of sophisticated instrument facility
Analytical service charges for use of sophisticated instrument facility In view of a severe cut in non planed grants of the University, we are constraint to implement nominal service charges against the
More informationEngineering Materials Research /DEVISER/
DEVelopment of Infrastructure for Smart Engineering Materials Research /DEVISER/ A Czech structural funds project aimed for building a new public research infrastructure called Laboratory of Functional
More informationENVIRONMENTAL EFFECTS ON COATINGS
ENVIRONMENTAL EFFECTS ON COATINGS Surfaces exposed to the environment, may be damaged by elements such as water, snow, ice, heat, dirt, smog, humidity, brake dust, grime, salts, chemical attack, and acid
More informationCT for non-destructive testing of plastic joints
CT for non-destructive testing of plastic joints B. Baudrit, S. Horlemann, E. Kraus 24. October 2013 German-Austrian-Danish Workshop on Industrial CT Scanning, TUM, Munich List of contents Introduction
More informationPrecision injection moulding
Extrusion Moulding Assembly Precision injection moulding Customised polymer solutions Your development partner and system supplier for medical and pharmaceutical assemblies and systems CERTIFICATE The
More informationClosing the loop: Rubber Recycling. Joint seminar Kumi-instituutti instituutti & MOL
Closing the loop: 1 Rubber Recycling Joint seminar Kumi-instituutti instituutti & MOL Contents 2 - Introduction - Present: Rubber crumb Surface activated rubber crumb Reclaim / devulcanizate - Future Introduction
More informationFoam Injection Molding:
Foam Injection Molding: Unique Process Solutions for Light Weighting Automotive Plastic Parts Steve Braig President & CEO Trexel, Inc. AGENDA Technology Overview > Chemical Foaming > Physical Foaming Foamed
More informationFaculty of Engineering and Architecture MATERIALS SCIENCE AND ENGINEERING
MATERIALS SCIENCE AND ENGINEERING IKCU- MATERIALS SCIENCE AND ENGINEERING Materials Science and Engineering Department established in 2012 and ve the program has started taking its first students at the
More informationpolymer additive General Overview
DuPont Fluoroguard polymer additive General Overview DuPont Fluoroguard is a range of colorless, odorless, and chemically inert polymer additives based on fluorinated synthetic oil. Fluoroguard is designed
More informationNaue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
More informationNew Advances in Rapid Prototyping using Inkjet-based 3D Printing
New Advances in Rapid Prototyping using Inkjet-based 3D Printing April 2011 Objet Geometries Ltd. DISCLAIMER: Objet Geometries Ltd. ("Objet") does not guarantee the final release and availability of materials,
More informationEffects of Tg and CTE on Semiconductor Encapsulants
Effects of Tg and CTE on Semiconductor Encapsulants Dr. Mark M. Konarski Loctite Corporation www.loctite.com Abstract As the role of direct-chip-attachment increases in the electronics industry, the reliability
More informationYour partner for safer fire proof materials and assemblies
Your partner for safer fire proof materials and assemblies now-how Let our knowhow in fire safety make your success Key player at the European level, develops, guaranties and qualifies the fire performances
More informationBasic Properties and Application of Auto Enamels
Basic Properties and Application of Auto Enamels Composition of Ceramic Automotive Glass Enamels Ceramic automotive glass colours are glass enamels that fire on to the glass during the bending process
More informationSD-0150 GENERAL PURPOSE ABS (Acrylonitrile Butadiene Styrene) (TA)
1) Product Description: SD-0150 GENERAL PURPOSE ABS (Acrylonitrile Butadiene Styrene) (TA) General Purpose ABS, SD 0150 grade, is a rigid thermoplastic with good processing characteristics. It is a high
More informationPlastics and Polymer Business. Properties enhancement for Plastics
News Letter Vol. 18, issue October-December, 2012 Hyperdispersants and Coupling Agents for Thermoplastics and Thermosets Solplus, Ircolplus and Solsperse hyperdispersants and coupling agents have been
More informationJoining techniques for lightweight constructions in heavy vehicles
Joining techniques for lightweight constructions in heavy vehicles Flanders DRIVE Index: Flanders DRIVE 1 Joining techniques for lightweight constructions 2 Project partners 3 5 lightweight challenges
More informationInfluence of material data on injection moulding simulation Application examples Ass.Prof. Dr. Thomas Lucyshyn
TRAINING IN THE FIELD OF POLYMER MATERIALS / PLASTICS Influence of material data on injection moulding simulation Application examples Ass.Prof. Dr. Thomas Lucyshyn 24 th April 2014 Otto Gloeckel-Straße
More informationNew technology for Rubber and Plastics
New technology for Rubber and Plastics Requests and offers from all over the world. Find your international partner to explore your international business opportunities in the database of the Enterprise
More informationFactsheet. UP Resins
Factsheet UP Resins & you COMPOSITE MATERIALS UP RESINS What is a UP Resin? Unsaturated Polyester Resins (UP Resins) are durable, resinous polymers dissolved in styrene. They are used in combination with
More informationExamination sessions (two) winter session (January/February) summer session (June/July) Courses per years Year I Semester I Semester II crt.
Transilvania University of Braşov, Romania Study program: EGINEERING AND MANAGEMENT OF ADVANCED MATERIALS METALLIC, CERAMIC AND COMPOSITE Faculty MATERIALS SCIENCE and ENGINEERING Study program (Curriculum)
More informationNylon 612: Viable Alternative Tubing Constructions in Fuel Systems
Nylon 612: Viable Alternative Tubing Constructions in Fuel Systems ITB Automotive Energy Storage Systems 2013 Novi, MI March 6-7, 2013 FAST FORWARD YOUR INNOVATION TM A. Schulman A Global Solutions Provider
More information2010 2011 Learning Enhancement Grant Program Grant Application. Applicant Information
2010 2011 Learning Enhancement Grant Program Grant Application Applicant Information Applicants must be full time faculty members. 1. Applicant Name Teresa D. Golden 3. Department Chemistry 2. EMPLID:
More informationCeramic Injection Moulding Capabilities
Ceramic Injection Moulding Capabilities TECHNICAL CERAMICS About is a global materials engineering company which designs and manufactures a wide range of high specification products with extraordinary
More informationThermoplastic composites
Thermoplastic composites Definition By definition, a thermoplastic is a material based on polymer (macromolecular compound) which can be shaped, in a liquid (viscous) state at a temperature either higher
More informationNotes on Polymer Rheology Outline
1 Why is rheology important? Examples of its importance Summary of important variables Description of the flow equations Flow regimes - laminar vs. turbulent - Reynolds number - definition of viscosity
More informationPLASTIC/METAL HYBRID TECHNOLOGY. Innovative Design Solutions for Structural Performance with Weight and Cost Reduction
PLASTIC/METAL HYBRID TECHNOLOGY Innovative Design Solutions for Structural Performance with Weight and Cost Reduction LANXESS Corporation Unites Plastic and Metal to Help Manufacturers Create Products
More informationTWOBEARS. Technical Information biofila silk & linen. By: Benno Besler & Eva Besler from: 7. November 2014 Version: 2
Technical Information biofila silk & linen By: Benno Besler & Eva Besler from: 7. November 2014 Version: 2 GENERAL INFORMATION biofila silk and biofila linen are compounds of biopolymers designed for 3D
More informationWATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12
WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 87 88 GOOD INDUSTRY PRACTICES 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12.1 BACKGROUND Most roofs in Singapore are constructed using reinforced
More informationScientific Opinion on the safety evaluation of the process, PP crates CHEP, used to recycle plastic for use as food contact materials 1
SCIENTIFIC OPINION Scientific Opinion on the safety evaluation of the process, PP crates CHEP, used to recycle plastic for use as food contact materials 1 EFSA Panel on food contact materials, enzymes,
More informationContents. Contributors. 1 Quality control and regulation 1 C.J. MOORES
Contents Contributors Preface xiii xiv 1 Quality control and regulation 1 C.J. MOORES 1.1 Introduction 1 1.2 The quality of medicines 2 1.2.1 The meaning of quality 2 1.2.2 Medicines are special 3 1.2.3
More informationChapter 5 POWDER-BASED RAPID PROTOTYPING SYSTEMS
Chapter 5 POWDER-BASED RAPID PROTOTYPING SYSTEMS 5.1 3D SYSTEMS SELECTIVE LASER SINTERING (SLS) 5.1.1 Company 3D Systems Corporation was founded by Charles W. Hull and Raymond S. Freed in 1986. The founding
More informationINDUSTRY INTRODUCTION: PLASTICS
PLASTICS INDUSTRY INTRODUCTION: PLASTICS A day without plastics is unthinkable in a modern, sustainable society. Plastics is used in an endless number of items in our daily lives and is extremely valuable
More informationBecause sustainability matters
Because sustainability matters 1992 Mike Biddle begins work on plastics separation Richmond, CA - USA 2002 Edison Award for Innovation 2005 Our aim is to be the leading global plastics recycling company
More informationfilm stretching production lines and components Specialty Machinery Quality creates value MF 1
film stretching production lines and components Quality creates value Specialty Machinery MF 1 Film stretching Lines and Equipment Film Stretching lines ahead of standard with custom-made systems Sheets
More informationAvoiding the Landfill: The Recycling of Vinyl Roof Membranes
Avoiding the Landfill: The Recycling of Vinyl Roof Membranes With its European counterparts blazing the trail, the North American vinyl (PVC) roofing industry has entered a new phase in its commitment
More informationChemical Engineering - CHEN
Auburn University 1 Chemical Engineering - CHEN Courses CHEN 2100 PRINCIPLES OF CHEMICAL ENGINEERING (4) LEC. 3. LAB. 3. Pr. (CHEM 1110 or CHEM 1117 or CHEM 1030) and (MATH 1610 or MATH 1613 or MATH 1617
More informationEXTERIOR LONG GLASS FIBER POLYPROPYLENE SYSTEM FOR AUTOMOTIVE APPLICATIONS. Abstract
EXTERIOR LONG GLASS FIBER POLYPROPYLENE SYSTEM FOR AUTOMOTIVE APPLICATIONS D. Fuller, S. Green, T. Ho, T. Kajdan, R. Lee, M. McKelvy, T. Sutton, T. Traugott The Dow Chemical Company, Dow Automotive Abstract
More informationENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING MERSEN A world leader committed to Renewable Energies A world leading supplier of electrical protection, sealing,
More informationLightweight structures with new car technologies
Lightweight structures with new car technologies Julian Haspel Application Development, LANXESS Business Unit Semi-Crystalline Products Automotive Days Poland October 27-28, 2011 LANXESS A premium supplier
More informationEnvironmental Product Declaration
Environmental Product Declaration PVDF-System According to EN 15804 Circling and distribution of purified water in a pharmaceutical plant Georg Fischer Piping Systems Ltd. Ebnatstrasse 111 CH-8201 Schaffhausen
More informationGuidance for monomers and polymers
GUIDANCE Guidance for monomers and polymers April 2012 Version 2.0 Guidance for the implementation of REACH 2 Guidance for monomers and polymers Version 2.0 April 2012 Version Changes Date Version 0 First
More informationDIRECT FIBER FEEDING INJECTION MOLDING OF CARBON FIBER REINFORCED POLYCARBONATE COMPOSITES. Abstract. Introduction
DIRECT FIBER FEEDING INJECTION MOLDING OF CARBON FIBER REINFORCED POLYCARBONATE COMPOSITES Putinun Uawongsuwan, Hiroyuki Inoya and Hiroyuki Hamada, Department of Advanced Fibro-Science, Kyoto Institute
More informationWelding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E)
Welding of Plastics Amit Mukund Joshi (B.E Mechanical, A.M.I.Prod.E) Introduction Mechanical fasteners, adhesives, and welding processes can all be employed to form joints between engineering plastics.
More informationThe Effects of Corona and Flame Treatment: Part 1. PE-LD Coated Packaging Board
TAMPERE UNIVERSITY OF TECHNOLOGY Institute of Paper Converting Part 1. PE-LD Coated Packaging Board Mikko Tuominen & Johanna Lahti Session 12.4 Introduction Extrusion coated paperboards are applied successfully
More informationBuilding Owners Guide to a Duro-Last System!
Building Owners Guide to a Duro-Last System Table of Contents Section 1: Introduction to Duro-Last Roofing Systems Section 2: Benefits of a Duro-Last Roofing System Section 3: Comparing a Duro-Last Roof
More informationPIETER HAASBROEK SENIOR MANAGER SABS RSA
PIETER HAASBROEK SENIOR MANAGER SABS RSA INTRODUCTION SABS OVERVIEW State owned company (established 1945) Mandated by the Standards Act 2008 (Act 8 of 2008) Employ 1200 people Head Office, Regional offices
More information4 Thermomechanical Analysis (TMA)
172 4 Thermomechanical Analysis 4 Thermomechanical Analysis (TMA) 4.1 Principles of TMA 4.1.1 Introduction A dilatometer is used to determine the linear thermal expansion of a solid as a function of temperature.
More informationINJECTION MOLDING COOLING TIME REDUCTION AND THERMAL STRESS ANALYSIS
INJECTION MOLDING COOLING TIME REDUCTION AND THERMAL STRESS ANALYSIS Tom Kimerling University of Massachusetts, Amherst MIE 605 Finite Element Analysis Spring 2002 ABSTRACT A FEA transient thermal structural
More informationThème Analytical Chemistry ECUE composant l UE
Thème Analytical Chemistry ECUE composant l UE UE 7.1 Performing analyses in the environment and complex systems UE 7.2 Heterogeneity and complexity UE 7.3 Processes in aquatic systems and at geo-interfaces
More informationPLASTICS & POLYMERS INNOVATION AWARD BENELUX
Flanders PlasticVision (FPV), the Dutch Federation of Rubber and Plastics Industry (NRK) and the Society of Plastics Engineers (SPE and its Benelux Section) are announcing their Plastics & Polymers Innovation
More informationGroup A/B Dust Explosion Classification Chilworth Hazard and Risk Profile (CHARP) - Standard package of tests
Item Description Item Remarks Explosion severity analysis (20L sphere): Triplicate test Explosion severity analysis (20L sphere): Single series screening test Explosion severity analysis (20L sphere):
More informationDOMO ENGINEERING PLASTICS IN CHEMICALS WE TRUST.
DOMO ENGINEERING PLASTICS IN CHEMICALS WE TRUST. Production of raw materials on Leuna production site 7 2 Phenol&Acetone Nylon 6 granules 6 Caprolactam 5 HAS PROFILE DOMO Engineering Plastics produces
More informationCERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
More informationProjects and R&D activities
Projects and R&D activities J.M. Jimenez On behalf of the Vacuum, Surface and Coatings Group (VSC) Vacuum, Surface and Coatings group* Mandate Design, construction, operation, maintenance and upgrade of
More informationA Career in Knowledge Transfer & Project Management
A Career in Knowledge Transfer & Project Management Dr Matthew Thornton Project Manager, NetComposites 27 November 2013 Outline of this presentation: 1995 2001: The undergraduate years! 2001 2005: The
More informationScience Industry Placement Program
Science Industry Placement Program Title: Analysis of various weld bead characteristics for assessment of polyethylene weld quality Company name: ExcelPlas Pty. Ltd Location: 473 Warrigal Road (Rear Factory),
More informationTECHNICAL DATA SHEET GRILON BG-15 S
TECHNICAL DATA SHEET GRILON BG-1 S Grilon BG-1 S is a heat stabilised PA6 injection moulding grade with 1% glass fibres. Grilon BG-1 S has the following important properties: Excellent surface finish Easy
More informationPhD Annual Scholarship Competition 2016
PhD Annual Scholarship Competition 2016 (DEL & VCRS Studentship) Built Environment Research Institute (BERI) Research Degree Topics Fire Safety Engineering Research & Technology Centre (FireSERT) Page
More informationC 5. chemical development contract research custom synthesis cgmp API manufacturing commercial production. Welcome to
C 5 chemical development contract research custom synthesis cgmp API manufacturing commercial production Welcome to ChemCon Company profile Company profile ChemCon offers outstanding chemical services
More informationInjection molding equipment
Injection Molding Process Injection molding equipment Classification of injection molding machines 1. The injection molding machine processing ability style clamping force(kn) theoretical injection volume(cm3)
More informationDEEPSEALSM SERVICE SOLUTIONS
DEEP WATER CHEMICAL SOLUTIONS DEEPSEALSM SERVICE SOLUTIONS (DEEP SEA ENGINEERING ASSURANCE LEADERSHIP) Solving challenges. Deepwater Solutions from Multi-Chem ABOUT HALLIBURTON Founded in 1919, Halliburton
More informationTHE POLYMERS BUSINESS
Early bird offer Book 6 weeks before the course and receive a 10% discount FUNDAMENTALS OF THE POLYMERS BUSINESS A comprehensive introduction to the world of polymers This two-day interactive course provides
More informationSecondary Containment Comparison ATI Ultra COAT vs HDPE
When choosing a secondary containment system it must be chosen based on its ability to withstand long term contact with the natural elements (weather), whatever the tanks hold (unrefined oil, fuels, acids,
More informationDISPLAY YOUR NOVELTIES AT MECSPE PARMA FAIRGROUND, ITALY
TECH N OLOGIE S FOR I NNOVATION DISPLAY YOUR NOVELTIES AT MECSPE PARMA FAIRGROUND, ITALY THE SHOWS OF MECSPE: 3DPRINT HUB in collaboration with: WWW.MECSPE.COM project and management: 31.625 HIGH QUALITY
More informationMARTIN TESTING LABORATORIES (MTL) PAINTS AND COATINGS TESTING CAPABILITIES
Liquid Coating Properties Composition VOC Content, ASTM D2369 Water Content, ASTM D4017 Physical Properties Calculating Physical Constants of Coatings, ASTM D5201 Density, ASTM D1475 Flash Point, ASTM
More informationCharacterization of Electronic Materials Using Thermal Analysis
application Note Thermal Analysis Characterization of Electronic Materials Using Thermal Analysis Thermal analysis comprises a series of powerful techniques for the characterization of the thermal, physical,
More informationPreface Light Microscopy X-ray Diffraction Methods
Preface xi 1 Light Microscopy 1 1.1 Optical Principles 1 1.1.1 Image Formation 1 1.1.2 Resolution 3 1.1.3 Depth of Field 5 1.1.4 Aberrations 6 1.2 Instrumentation 8 1.2.1 Illumination System 9 1.2.2 Objective
More information100 Year Service Life of Polypropylene And Polyethylene Gravity Sewer Pipes. Summary Technical Report
December 2014 100 Year Service Life of Polypropylene And Polyethylene Gravity Sewer Pipes A TEPPFA Project in cooperation with Borealis and LyondellBasell Summary Technical Report (Based on Extracts of
More informationDevelopment/ 3D Modelling Calculations and Sizing Design Eco-design Expert knowledge Software Virtual prototyping Simulation.
BUSINESS FIELDS REPRESENTED: Studies and development Equipment supply Raw materials Additive manufacturing Rapid prototyping Design and manufacture of rapid tooling and / or prototype molds Laboratory
More informationChemistry 321, Experiment 8: Quantitation of caffeine from a beverage using gas chromatography
Chemistry 321, Experiment 8: Quantitation of caffeine from a beverage using gas chromatography INTRODUCTION The analysis of soft drinks for caffeine was able to be performed using UV-Vis. The complex sample
More informationStudies on the Effect of Ageing on a range of UK Polymer Bonded Explosives
Studies on the Effect of Ageing on a range of UK Polymer Bonded Explosives Philip Cheese, Peter Barnes, Michael Sharp DOSG Ron Hollands and Ian Murray BAE Systems Nigel Davies and Peter Jemmet RMCS Shrivenham
More informationSpecialty Engineered Materials for Wire & Cable
Industr y Over view Specialty Engineered Materials for Wire & Cable Developing innovative polymer solutions that help wire & cable manufacturers exceed consumer expectations, stand apart from their competition
More information2. PREPARATION OF TEST SPECIMENS
Leaching of Cement Lining in Newly-Laid Water Mains (Part II) Ong Tuan Chin and Dr. Wong Sook Fun School of Civil and Environmental Engineering, Nanyang Technological University, 5 Nanyang Avenue, Singapore
More informationLightweighting: How Adhesive Tapes Contribute to Weight Reduction in Automotive Production Processes
Lightweighting: How Adhesive Tapes Contribute to Weight Reduction in Automotive Production Processes Presented by: Amy Kaus Senior Applications Solution Engineer tesa tape, inc. www.tesatape.com/industry/automotive
More informationFACULTY OF SCIENCES Cycle Teaching Period Nature Num. of credits (T/P) Second Semi-optional 5 (4/1)
MASTER's DEGREE IN ADVANCED CHEMISTRY POSTGRADUATE DEGREE IN ADVANCED CHEMISTRY DEPARTMENT OF CHEMISTRY FACULTY OF SCIENCES UNIVERSITY OF BURGOS COURSE CODE Polymer materials: Synthesis, properties and
More informationHexFlow RTM6/RTM6-2. HexFlow
HexFlow RTM6/RTM6-2 Safety & Processing Recommendations for Injection & Infusion HexFlow RTM6/RTM6-2 Safety & Processing Recommendations for Injection & Infusion These recommendations along with the Technology
More informationTPO: Getting Better With Age
TPO: Getting Better With Age By Michael Mendoza, TPO product manager, Firestone Building Products Thermoplastic polyolefin has matured. By any criteria, TPO is no longer the new kid on the block when it
More informationThe ColorMatrix quick guide to liquid color. for plastics and silicones
The ColorMatrix quick guide to liquid color for plastics and silicones 1 Colorant selection Understanding which colorant technology best suits your particular product application will help ensure you gain
More informationExplaining and avoiding faults Increasing availability
Explaining and avoiding faults Increasing availability > Cables > Cable joints > Cable terminals Cables, cable joints, cable terminals Increasing availability A cable breakdown usually means an unexpected
More informationTHE WEAR OF INJECTION MOULD FUNCTIONAL PARTS IN CONTACT WITH POLYMER COMPOSITES
26 THE WEAR OF INJECTION MOULD FUNCTIONAL PARTS IN CONTACT WITH POLYMER COMPOSITES Janette Brezinová, Anna Guzanová Received 27 th January 2009; accepted in revised form 28 th February 2009 Abstract The
More informationElectron Beam Technology for Pressure Sensitive Adhesive Applications
Electron Beam Technology for Pressure Sensitive Adhesive Applications Introduction Stephen C. Lapin, Ph.D. PCT Engineered Systems LLC Davenport, IA, USA Initial reports on the use of ultraviolet (UV) and
More informationCharacterization of Polymers Using TGA
application note Characterization of Polymers Using TGA W.J. Sichina, Marketing Manager Introduction Thermogravimetric analysis (TGA) is one of the members of the family of thermal analysis techniques
More information