Types of Assembly Male Headers with Solder Pins with 1-/2-Conductor Female Plugs

Transcription

1 Types of Assembly Male Headers with Solder Pins with -/-Conductor Female Plugs 0* * Maximum dimension when using -conductor female plugs.* * Maximum dimension when using -conductor female plugs Male header with straight solder pins Male header with angled solder pins Male header with angled solder pins Male header with fixing flanges -conductor female plug with bottom-mount locking levers Male header with fixing flanges -conductor female plug with lateral locking levers Male header with feedthrough flanges -conductor female plug -conductor female plug Cutouts for headers with fixing flanges for feedthrough applications and locking levers Female plugs with bottom-mounted locking levers Female plug without locking levers L < > max. > <_ Cutouts for -pole locking levers (- to -pole female plugs) Cutouts for single pole locking levers < > > <,, > <, Female plug with lateral locking levers < >, < > < >, L L > < < > L < > > <, > < > <, < > < > < < > < > L L,, Layout for locking levers outer inner > > L0 >, L, > <, < L < >, < > < > L > <,, L = No. of poles x pin spacing +. mm L = L +. mm L = L +. mm L = No. of poles V x pin spacing - 0. mm L = L +. mm L0 = No. of poles V x pin spacing + 0. mm L = L0 +. mm No. of poles V: Number of poles before the pole with the locking lever attached

2 X-COM -SYSTEM -Conductor Female Plugs mm 00 V/ kv/ AWG - 00 V, 0 AU 00 V, 0 A module width mm / 0. in 00 V = rated voltage kv = rated surge voltage = pollution degree (also see Section ) See current-carrying capacity curve, pages to and at Strip length, see packaging or instructions. Item-no. suffix... / /000-0 Application examples for -pole female plug: Phase selection in three-phase network Test plug with rated current capability Simplified circuit expansion addition of base circuits requires only female plugs to be plugged in See page -conductor female plug, for insertion into carrier terminal blocks or male connectors, with coding fingers,, commoning possible with miniature adjacent jumpers Accessories Miniature WSB (see Section ) mm s (0. mm f-st) white (x) mm light - 00 (x) 0. - mm dark - 00 (x) Miniature adjacent jumper, insulated, I N A (x) Jumper cover, for -conductor female plugs, for poles - 00 (x) CAGE CLAMP (0x00) female plugs with -pole - 00 (x) orange - 00 (x) female plugs with -poles or more orange - 00 (x) Strain relief plate, -pole (x) - to -pole - 00 (x) - to -pole - 00 (x) Strain relief plate, - to -pole - 00 (x) 0- to -pole - 00 (x) L, 0, for terminal blocks yellow 0-00 (x) -pole -0 Miniature WSB Quick marking system, 0 strips with 0 markers per card, mm wide markers plain -0 Miniature WSB Quick marking system, plain, 0 strips with 0 markers per card, mm wide markers yellow -0/ red -0/ / / orange -0/000-0 light green -0/000-0 green -0/000-0 violet -0/000-0 L = Number of poles x module width For list of approvals and user guide, see pages to.

3 X-COM -SYSTEM -Conductor Female Plugs with Lateral Locking Levers mm 00 V/ kv/ AWG - 00 V, 0 AU 00 V, 0 A module width mm / 0. in Jumper cover for -conductor female plugs 00 V = rated voltage kv = rated surge voltage = pollution degree (also see Section ) See current-carrying capacity curve, pages to and at Strip length, see packaging or instructions. See page -conductor female plug with lateral locking levers, with coding fingers,, commoning possible with miniature adjacent jumpers, only to be used with male connectors -0/ / / / / / / / / / / / / / Accessories Miniature WSB (see Section ) mm s (0. mm f-st) white (x) mm light - 00 (x) 0. - mm dark - 00 (x) Miniature adjacent jumper, insulated, I N A (x) Jumper cover, for -conductor female plugs, for poles - 00 (x) Male connector with fixing flanges and -conductor female plug with lateral locking levers, L,,, 0 0, for terminal blocks yellow 0-00 (x) CAGE CLAMP (0x00) with 00 mm cable, mm red 0-0 with 00 mm cable,. mm yellow 0-0 Strain relief plate, - to -pole - 00 (x) - to -pole - 00 (x) Strain relief plate, - to -pole - 00 (x) 0- to -pole - 00 (x) Male connector and -conductor female plug with lateral locking levers L = Number of poles x module width For list of approvals and user guide, see pages to. -pole -0

4 0 X-COM -SYSTEM -Conductor Female Plugs mm 00 V/ kv/ AWG - 00 V, 0 AU 00 V, 0 A module width mm / 0. in 00 V = rated voltage kv = rated surge voltage = pollution degree (also see Section ) See current-carrying capacity curve at Strip length, see packaging or instructions. Item-no. suffix... / /000-0 See application notes for: Staggered jumper, page 0 -conductor female plug, for insertion into carrier terminal blocks or male connectors, with coding fingers,, commoning possible with adjacent jumpers and staggered jumpers Accessories Miniature WSB (see Section ) mm s (0. mm f-st) white (x) mm light - 00 (x) 0. - mm dark - 00 (x) Adjacent jumper, insulated, I N = I N terminal block (x) Staggered jumper, insulated, width mm/0. in, I N A from to 0-00 (x) from to 0-00 (x) from to 0-00 (x) from to 0-0 (x) from to 0-0 (x) from to 0-0 (x) from to 0-0 (x) Commoning possibility of female plugs After removal, commoned potentials still remain commoned Use of plug-in jumpers instead of additional wired jumpers Can be used as a hardware key for safety lockout Can also be used as a commoning jumper for sensor circuits or machine programming < L > > < <, > L = Number of poles x module width < 0 > <, > For list of approvals and user guide, see pages to. for terminal blocks yellow 0-00 (x) female plugs with -pole - 00 (x) orange - 00 (x) female plugs with -poles or more orange - 00 (x) Strain relief plate, -pole (x) - to -pole - 00 (x) - to -pole - 00 (x) Strain relief plate, - to -pole - 00 (x) 0- to -pole - 00 (x) -conductor female plugs Commoning signals from one sub-assembly to the other (bus structure) Can be used as a T-wire branch tap connection (e.g., for lighting wiring) Enables a higher number of connection possibilities

5 X-COM -SYSTEM -Conductor Female Plugs, Angled mm 00 V/ kv/ AWG - 00 V, 0 AU 00 V, 0 A module width mm / 0. in 00 V = rated voltage kv = rated surge voltage = pollution degree (also see Section ) See current-carrying capacity curve at Strip length, see packaging or instructions. Item-no. suffix... / /000-0 See page -conductor female plug, angled, for insertion into carrier terminal blocks or male connectors, with coding fingers, -0/ / / / / / / / / / / / / / / L,, Accessories Miniature WSB (see Section ) mm s (0. mm f-st) white (x) mm light - 00 (x) 0. - mm dark - 00 (x) for terminal blocks yellow 0-00 (x) CAGE CLAMP (0x00) with 00 mm cable, mm red 0-0 with 00 mm cable,. mm yellow 0-0 Strain relief plate, -pole (x) - to -pole - 00 (x) - to -pole - 00 (x) Strain relief plate, - to -pole - 00 (x) 0- to -pole - 00 (x) -pole -0 Angled female plugs provide reduced installation height. Angled female plugs installed on double-deck terminal block., Miniature WSB Quick marking system, 0 strips with 0 markers per card, mm wide markers plain -0 L = Number of poles x module width For list of approvals and user guide, see pages to.

6 X-COM -SYSTEM Female Plugs for Self-Assembly mm 00 V/ kv/ AWG - module width mm / 0. in mm 00 V/ kv/ AWG - module width mm / 0. in mm AWG - 00 V/ kv/ module width mm / 0. in Item No. -conductor end module, with coding fingers, commoning possible with miniature adjacent jumpers / / conductor center module, with coding fingers, commoning possible with miniature adjacent jumpers / / Item No. -conductor end module, with coding fingers, commoning possible with adjacent jumpers and staggered jumpers / / conductor center module, with coding fingers, commoning possible with adjacent jumpers and staggered jumpers / / Item No. -conductor end module, angled, with coding fingers - 0 -/ / conductor center module, angled, with coding fingers - 0 -/ / conductor base module, with integrated end plate, with coding fingers, commoning possible with miniature adjacent jumpers / / Item-Specific Accessories Miniature adjacent jumper, insulated, I N A (x) -conductor base module, with integrated end plate, with coding fingers, commoning possible with adjacent jumpers and staggered jumpers / / Item-Specific Accessories Adjacent jumper, insulated, I N = I N terminal block (x) -conductor base module, angled, with integrated end plate, with coding fingers - 0 -/ / Accessories for Female Plugs mm s (0. mm f-st) white (x) mm light - 00 (x) 0. - mm dark - 00 (x) for terminal blocks yellow 0-00 (x) female plugs with -pole - 00 (x) orange - 00 (x) For list of approvals and user guide, see pages to. Miniature WSB (see Section ) female plugs with -poles or more orange - 00 (x) with 00 mm cable, mm red 0-0 with 00 mm cable,. mm yellow 0-0 CAGE CLAMP (0x00) Miniature WSB Quick marking system, 0 strips with 0 markers per card, mm wide markers plain -0 Strain relief plate, -pole (x) - to -pole - 00 (x) - to -pole - 00 (x) Strain relief plate, - to -pole - 00 (x) 0- to -pole - 00 (x)

7 Self-assembly of individual female plugs: Using modular female plugs from the X-COM -SYSTEM, female plugs can be customized for applications requiring varying numbers of poles (e.g., when designing prototypes). Modules and pole numbers: A self-assembled female plug consists of: Base module with integrated end plate, up to center modules (corresponding to a -pole female plug = maximum number of poles), end module. Intended use: According to EN, connectors without current interrupting capacity shall not be mated and unmated when live or under load. Assembly: The appropriate mounting tool shall be used to guarantee that the individual modules are properly attached to each other without damaging the locking latches. 00 V = rated voltage kv = rated surge voltage = pollution degree (also see Section ) See current-carrying capacity curve at Strip length, see packaging or instructions. End module Center module Base module Example: -, -Conductor Female Plug Base module with integrated end plate -0/000-0 Center module -0/ Center modules -0 End module -0

8 X-COM -SYSTEM -Conductor Female Plugs mm 00 V/ kv/ AWG - module width mm / 0. in mm 00 V/ kv/ AWG - module width mm / 0. in 00 V = rated voltage kv = rated surge voltage = pollution degree (also see Section ) See current-carrying capacity curve at Strip length, see packaging or instructions. -conductor female plug with ground base module (), for insertion into carrier terminal blocks or male connectors, with coding fingers, commoning possible with miniature adjacent jumpers -0/ conductor female plug with ground end module (), for insertion into carrier terminal blocks or male connectors, with coding fingers, commoning possible with miniature adjacent jumpers -0/ conductor female plug with ground base module (), for insertion into carrier terminal blocks or male connectors, with coding fingers, commoning possible with miniature adjacent jumpers -0/ conductor female plug with ground end module (), for insertion into carrier terminal blocks or male connectors, with coding fingers, commoning possible with miniature adjacent jumpers -0/ Accessories for -Conductor Female Plugs Miniature WSB (see Section ) mm s (0. mm f-st) white (x) mm light - 00 (x) 0. - mm dark - 00 (x) Miniature adjacent jumper, insulated, I N A (x) female plugs with -pole - 00 (x) orange - 00 (x) female plugs with -poles or more orange - 00 (x) with 00 mm cable, mm red 0-0 with 00 mm cable,. mm yellow 0-0 For list of approvals and user guide, see pages to. for terminal blocks yellow 0-00 (x) Strain relief plate, - to -pole - 00 (x) Strain relief plate, - to -pole - 00 (x) -pole -0 -pole -0 CAGE CLAMP (0x00) Miniature WSB Quick marking system, 0 strips with 0 markers per card, mm wide markers plain -0

9 Snap-on Type Strain Relief Housings for Series Female Plugs and Male Connectors with CAGE CLAMP Connection Snap-on type relief housing Snap-on type relief housing cable outlet rear, - to -pole only suitable for cable ties (Fa. Hellermann not offered by WAGO) not for cable clamp cable outlet rear cable outlets, cover cable outlets, covers consisting of strain relief support/housing, consisting of strain relief support/housing, Application Item-Specific Accessories Item-Specific Accessories WSB Quick marking system, 0 strips with 0 markers per card, for terminal widths -. mm plain 0-0 Cable clamp, Fixing screw, for strain relief from -pole and on 0- for cable clamp for or more poles 0-0 Dimensions for strain relief housings < L > < 0, > < L >, > < >,,< (,) < L > ( D ) < L > < L > No. of L poles L L L L D Snapping on strain relief housing < L > ( D ) < L > <_, _>