Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) All rights reserved by Bosch
|
|
- Harry Williams
- 7 years ago
- Views:
Transcription
1 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) Linear Products Training
2 Rexroth Ball Nuts Wide range of standard ball nuts: Diameters 6mm-80mm Leads 1mm- 40mm 63x40 is the largest size produced in Charlotte Preferred GoTo versions FEMES, FEMEC, FEMEB FEMEB Sizes 12x5-40x40 Standard end machining Linear Motion and Assembly Technologies
3 Rexroth Standard Recirculation Optimized travel path provides Smooth tangential liftoff with Delrin finger Gradual change of direction to reduce forces Dramatically reduced heat generation at high speeds Enclosing the system within the nut body Provides total protection from environment and handling influences Ensures no accidental damages occur post installation Makes the smallest envelope dimensions possible Allows simple housing designs and fabrication Linear Motion and Assembly Technologies
4 Rexroth Standard Seals Full Contact, Best in Class Sealing Matches screw cross-section, even the groove Impervious to almost all known cutting fluids Rigid shield against wood, metal, and debris Importantly, keeps lubricant clean and contained Linear Motion and Assembly Technologies
5 Ballscrew Assemblies Features Sizes from 6mm to 80mm and leads from 1mm up to 40mm 13 different ball nut solutions to choose from Full range of bearings, pillow block units, and ball nut housings Lead accuracy from T5 (0.023/300mm) to T9 (0.130/30mm) Preload and non-preload solutions available Corrosion resistant designs with our TDC plating Customized or standard end machining possibility Highest DIN rating in the industry CAD Drawings and 3D STEP Files Available Rotating Nut 5
6 Planetary Screw Assembly (PLSA = Planetary Screw Assembly) Features Dynamic and static load capacities up to 220kN and 481kN, respectively. Higher throughput speeds up to 1.5m/s Standard overall screw lengths up to 3000mm Reduce motor sizes w/ the high efficiency precision roller technology. Lower operational cost when compared to hydraulics. Extended lubrication life and protection with Rexroth s high performing sealing system. 6
7 Ball Rail
8 Ball Rail Profile Geometry O-Arrangement X-Arrangement M M t0 M M t0 O-arrangement (Double Backed) Example : Rexroth Ball Rail Block - Increases resistance to deflection under heavy moment loading X-arrangement (Double Faced)
9 Roller Rail
10 Rexroth Roller Rail 100 Industry leading size offering from mm Roller rail size 125 is currently the largest roller rail on the market Roller rail size 65XL and size100 fills the gap between the previous standard sizes 65 and 125 The main target industries are heavy machinery manufacturing, forming and injection molding 10
11 Linear Guides Ball Rail Products Ball rail systems with corrosion protection Aluminium CR NR NR II Aluminium runner blocks Steel internals Compact light weight design, 60% weight reduction 2 types Sizes: 15 to 35 Precision: N and H Steel runner blocks with corrosion resistant coating (matt silver hard chrom-plated) 18 types Sizes: 15 to 65 Precision: H Preload: C0 und C1 SS runner blocks with Corrosion resistant steel Steel internals 6 types Sizes: 15 to 35 Precision: H Preload: C0 und C1 All metal parts from corrosion resistant SS steel 6 types Sizes: 15 to 35 Precision: N, H, P Preload: C0,C1 and C2 Preload: C0 and C1 with cover strip Top & bottom mounting possible DC-IA/SFP Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. 11
12 Linear Modules Belt & Ballscrew Side drives for Belt modules Single & Double Carriages Features Cam roller belt module High Speed 10 m/s Belt and Ballscrew Drives Profile Rail and Cam Roller Guides 12 meter length Load Capacity 49,000N Weight Capacity 1000 Kg Speeds up to 10 m/s Repeatability up to 0.005mm Accuracy up to 0.01mm Mechanical & Proximity Switches Clamping Fixtures, T Nuts Bellows 12
13 Linear Modules Construction MKK MKR MLR Housing Guide Anodized aluminum extrusion Excellent strength/weight ratio, corrosion resistant Single Ball Rail High load capacities Dual Cam Roller High speeds, lower cost Drive Ball Screw Toothed Belt High load capacity, accurate & repeatable High speeds, long lengths Cover Plastic sealing strip (12-40, 15-65) Steel sealing strip (20-80, ) Bellows (35-165) Plastic sealing strip (12-40, 15-65) Steel sealing strip (20-80, ) None (35-165) None Belt covers opening in extrusion Linear Motion and Assembly Technologies
14 Compact Modules Construction CKK CKR CKP CKL (in dev.) Housing Guide Anodized aluminum extrusion Excellent strength/weight ratio, corrosion resistant Dual Ball Rail High load capacities, especially moment (off-center) loads Drive Ball Screw Toothed Belt Pneumatic Linear Motor High load capacity, accurate & repeatable High speeds, long lengths Low cost for 2 point positioning High speeds, accuracy and repeatability Cover Plastic sealing strip Gap type seal None Belt covers opening in extr. None Linear Motion and Assembly Technologies
15 PSK-Precision Module Features Machined steel frame with integral ball rail system Up to 940mm length Zero Backlash Nut Single and Double Carriage Cover Strip Options Repeatability up to 0.005mm Accuracy up to 0.01mm Mechanical & Proximity Switches Clamping Fixtures, T Nuts 15
16 CKL Linear Motor Features Ironless Linear Motor Manufactured in Charlotte, NC Lengths up to 5.5 meters Velocity up to 5 m/sec Acceleration up to 500 m/sec 2 Resolution 0f 0.5µm Forces up to 1,712 N 16
17 EMC-Linear Actuator Features 6 Different Sizes Class 5, 7 Precision Ballscrew Preloaded Nuts Available Zero Backlash Nut 29,000 N Max Force 1,500 mm Max Stroke Side Drive Option Various Mounting Options Mounting Options 17
18 Electro-Mechanical Cylinder EMC Assembly Arrestor Nut BSA Screw End cap with highquality Angular Contact Ball Bearing Cover with Bushing and Seal IP65 Relubrication according to BSA (Cat. R310A3301) Threaded Bolt and Rod Stainless Steel BSA Nut; reduced backlash Anti-Rotation Device Easy mounting for accessories Aluminum Profile with Switch Groove 18
19 THANK YOU 19
Rexroth Linear Motion Technology
2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Ball Rail Systems R310A 2202 (2007.05) Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Standard
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationUnited Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Linear Units Table of Contents Introduction... 5 Introduction... 5 How to Choose a Unit...6-7 Technical Introduction...8 - Linear Units with Ball Screw Drive and Ball Guide... 3 Introduction...
More informationR310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationUnited Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Danaher Motion - Helping you build a better machine, faster Danaher Corporation combined over 30 industry-leading brands such as Kollmorgen, Thomson, Dover, Pacific Scientific, Portescap,
More informationSelecting and Sizing Ball Screw Drives
Selecting and Sizing Ball Screw Drives Jeff G. Johnson, Product Engineer Thomson Industries, Inc. Wood Dale, IL 540-633-3549 www.thomsonlinear.com Thomson@thomsonlinear.com Fig 1: Ball screw drive is a
More informationLinear Systems. Main Catalog
Linear Systems Main Catalog MOVITEC Linear Systems The Italian company Impex Tecniche Lineari designs and manufactures a wide range of products under the brand name MOVITEC: Electromechanical and pneumatic
More informationBall Rail Tables TKK. with Ball Rail Systems and Ball Screw Drive R310EN 2501 (2008.04) The Drive & Control Company
with Ball Rail Systems and Ball Screw Drive R310EN 2501 (2008.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationProfile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationDryLin ZLW Belt Drive
Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having
More informationQ&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers
Q&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers Topic: Noise Q: Is there a way to predict/calculate noise on a ball screw? A: No, there is no way to calculate the noise of
More informationTBG-25 OPTIONS X AXIS TRAVEL (MM) Z AXIS TRAVEL (MM) OPTIONS FOR: SPECIFICATIONS. Specifications. Configuration. Belt Type 25.
LINEAR ROBOTICS > T-BOT GANTRY ROBOTS T-BOT GANTRY ROBOTS TBG-25 OPTIONS X AXIS TRAVEL (MM) 500 1000 2000 Custom Z AXIS TRAVEL (MM) 250 500 Custom Controls Motor Gearbox HOW TO BUILD YOUR TBG-25: Features
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationSo You Want to Think Lean? Jürgen Hilbinger and Martin Schreiber
So You Want to Think Lean? Jürgen Hilbinger and Martin Schreiber INA reprint November 2000 So You Want to Think Lean? New High-Precision Bearing Unit for Cost-Effective Ball Screw Supports in the Small
More informationWhy Lead Screws are the Best Fit for Many Linear Motion Applications - and How to Rightly Apply Them
Why Lead Screws are the Best Fit for Many Linear Motion Applications - and How to Rightly Apply Them Robert Lipsett, Engineering Manager, Thomson BSA Thomson Industries, Inc. San Jose, CA 800.882.8857
More informationSense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More informationPosition Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationExperience In Motion. Valtek Spring Cylinder Linear Actuators
Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators
More informationITT Industrial Products
ITT Industrial Products Providing custom industrial solutions to meet customers application needs globally. ITT Control Technologies GmbH under the ITT Enidine brand provides quality energy absorption
More informationSMALLER SBD15-60 SIZE NEW NOW AVAILABLE. HepcoMotion. SBD Sealed Belt Drive
NEW SMALLER SD15-60 SIZE NOW AVAILALE HepcoMotion SD Sealed elt Drive For amendments and updates visit www.hepcomotion.com and select literature button Introduction The HepcoMotion SD is an exceptionally
More informationConfigured Linear Motion Assemblies Reduce Engineering and Assembly Costs and Leadtime
Configured Linear Motion Assemblies Reduce Engineering and Assembly Costs and Leadtime Kyle Thompson, Associate Product Line Manager Thomson Industries, Inc. www.thomsonlinear.com www.linearmotioneering.com
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationAlternative Linear Motion Systems. Iron Core Linear Motors
Alternative Linear Motion Systems ME EN 7960 Precision Machine Design Topic 5 ME EN 7960 Precision Machine Design Alternative Linear Motion Systems 5-1 Iron Core Linear Motors Provide actuation forces
More informationLinear guide slides. For smooth and extremely accurate positioning
Linear guide slides For smooth and extremely accurate positioning Complete Gilman USA slide selection Linear slides ** Built-to-order Ball or roller styles Used for high-precision, high-speed applications
More informationChoosing Between Electromechanical and Fluid Power Linear Actuators in Industrial Systems Design
Choosing Between Electromechanical and Fluid Power Linear Actuators in Industrial Systems Design James Marek, Business Unit Director, Thomson Systems Thomson Industries, Inc. 540-633-3549 www.thomsonlinear.com
More informationCNC HARDWARE & TOOLING BASICS
Computer Aided Manufacturing (CAM) CNC HARDWARE & TOOLING BASICS Assoc. Prof. Dr. Tamer S. Mahmoud 1. Parts of CNC Machine Tools Any CNC machine tool essentially consists of the following parts: Part Program,
More informationSERVOMECH Linear Actuators
. SERVOMECH Linear actuators SERVOMECH mechanical linear actuators are motorised mechanical cylinders able to transform the rotary motion of a motor into the linear motion of a push rod. They are designed
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationConstruction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6)
Contents Construction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6) Dust Proof (7) Dimensions of Tapped-hole Rails (8) Rail
More informationThe modular Line and Room Gantry design from SCHUNK
The modular Line and Room Gantry design from SCHUNK Save up to 50% Exceptional precision from the competence leader for clamping technology and gripping systems Standard Gantries ready for assembly, at
More informationMachine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Bolt shut-off with integrated 2-way actuator pneumatically
More informationFDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
More informationStainless Linear Motion Rolling Guide series
products are avaiable from: MARYLAND METRICS phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 P.O.Box 261 Owings Mills, MD 21117 USA URL: http://mdmetric.com E-mail: sales@mdmetric.com
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More informationWhen looking at machine tools, the details of the installed drive technology usually
Multiple Solutions: Different Drive Concepts for Machine Tools When looking at machine tools, the details of the installed drive technology usually remain concealed. There are, in principle, various possibilities
More informationDisplacement encoders
Displacement encoders Analogue and digital For measuring and positioning For use with pneumatic components 1 Displacement encoders Key features Analogue displacement encoders MLO-POT- -TLF Conductive plastic
More informationBelt Tensioning Methods for Small Package Conveyors What s the best solution?
Belt Tensioning Methods for Small Package Conveyors What s the best solution? Industrial White Paper By: Michael A. Hosch, P.E. Dorner Mfg. Corp. 975 Cottonwood Avenue Hartland, WI 53029 USA Phone: 800
More informationNorbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationLinear Recirculating Roller Bearing and Guideway Assemblies. Series RUE-E / RUE-E-KT-L
Linear Recirculating Roller Bearing and Guideway Assemblies Series RUE-E / RUE-E-KT-L C o n c e p t Linear Recirculating Roller Bearing and Guideway Assemblies RUE-E / RUE-E-KT-L: Optimum Running Characteristics
More informationEMR project Overview
EMR project Overview MICE Collaboration Meeting RAL, May 31, June 3-2009 1. 1. EMR EMR conceptual design design 2. 2. Mechanical envelope 3. 3. Pending issues issues & outlook outlook University of Geneva:
More informationmechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles
Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles
More informationUNIT II Robots Drive Systems and End Effectors Part-A Questions
UNIT II Robots Drive Systems and End Effectors Part-A Questions 1. Define End effector. End effector is a device that is attached to the end of the wrist arm to perform specific task. 2. Give some examples
More informationCustom configuration such as modified angle dimensions, other flange standards, 3-way function, alternative materials.are available on request.
LEAKVALVE: HIGHLIGHTS The core of this valve is a diaphragm in stainless steel 316L, gold plated. Robust, it cannot be damaged with any normal methods. The dead volume is kept as small as possible. There
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More information12.2 Compact Type, MSB Series
12.2 Compact Type, MSB Series A. Construction Upper Retainer Carriage End Cap End Seal Rail Grease Nipple Ball Lower Retainer 45 Bottom Seal 45 B. Characteristics The trains of balls are designed to a
More informationMachine nozzle with needle shut-off type HP pneumatically or hydraulically controlled
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator
More informationMACHINE SCREW ACTUATORS 2 to 100 Tons
2 to 100 Tons Top Plate 316 S.S. Must be bolted to lifting member to prevent rotation except when screw is keyed. Lifting Screw 316 S.S. Also available as threaded end or clevis end. Shell Cap 316 S.S.
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationLinear Motion System: Transport and positioning for demanding applications
Linear Motion System: Transport and positioning for demanding applications 2 The Perfect Concept for a variety of applications The Linear Motion System (LMS) from Rexroth is a unique technical solution
More informationProduct catalogue, tank cleaning systems
Product catalogue, tank cleaning systems Aquamat Tank cleaning units Aquarex Tank cleaning systems www.hammelmann.com Contents (Navigation via Bookmarks) Tank cleaning units L XL XXL High pressure lance
More informationAPPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
More informationNSK Product Lineup for Machine Tools
NSK Product Lineup for Machine Tools We have two general catalogs on Super Precision and Precision Machine Components available, which contain detailed information related to our bearings and linear products.
More informationIntroduction to Accuracy and Repeatability in Linear Motion Systems
Introduction to accuracy and repeatability in linear motion systems By Gary Rosengren, Director of Engineering Tolomatic, Inc. About the Author Gary Rosengren is Director of Engineering at Tolomatic and
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationCOUNTERBALANCE VALVES
COUNTERBALANCE VALVES Introduction They are modulating valves which allow free flow into the actuator and then block the reverse flow until they feel a pilot pressure inversely proportional to the load
More informationRotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
More informationMachine tool optimization
Machine tool optimization SKF solutions for super-precision, productivity and sustainability The Power of Knowledge Engineering Run faster, longer, Machine tools: whether you are designing them or using
More informationOperating Instructions Drill rig DRU160
Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationSECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationPrecise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
More informationUSER MANUAL ELECTRICAL PARALLEL GRIPPER GPE. Mechanical Part
USER MANUAL ELECTRICAL PARALLEL GRIPPER GPE Mechanical Part BA-100069 Starting from serial number 427127 English, edition 02/2008 Contents 1. Important information 2 1.1. Introduction 2 1.2. EU - conformance
More information10. CNC Hardware Basics
CAD/CAM Principles and Applications 10 CNC Hardware Basics 10-1/10-20 by P.N.Rao 10. CNC Hardware Basics 10.1 Structure of CNC machine tools Table 10.1 Some design criteria for CNC machine tool design
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationHow To Fit A Portman Door Leaf
Portman Sliding Door Gear Timber/Frames Doors Frameless Glass Doors Top track Portman top tracks are suitable for door leaves of up to 80kg as standard Material is 6063T6 aluminium alloy anodised to 15
More informationSeries 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
More informationSICONT Limit Switches Type 3SE3 upto 500 VAC, 600 VDC, 10A
s SICONT Limit Switches Type 3SE3 upto 500 VAC, 600 VDC, 10A Introduction The technical and descriptive information on the function, construction and selection of the new types of 3SE3 limit switches is
More informationSlides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
More informationAtling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationSITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents
SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould Closing Devices series FSP drive
More informationTubular connection elements
KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular
More informationDiaphragm Actuators Favorable Variety Pneumatic Diaphragm Actuators Electric Actuators Hydraulic Actuators
Favorable Variety Whether rotary or linear with pneumatic, electric, and hydraulic valve actuators from ARCA Regler GmbH, you always have the right solution at hand. ARCA s comprehensive product portfolio
More informationWhirling Machine. New Dimension of Whirling Technology. Thread Whirling Machines. Big Workpiece Diameter. High Pitch Thread
LEISTRITZ PRODUKTIONSTECHNIK GMBH Thread Whirling Machines Whirling Machine New Dimension of Whirling Technology Big Workpiece Diameter High Pitch Thread Customer Satisfaction remains the Highest Priority
More informationFeatures IMC Precision Link Conveyors are ideal for linear transfer applications with features including:
Features IMC Precision Link Conveyors are ideal for linear transfer applications with features including: Table Top or Heavy Duty versions Precision positioning of parts for assembly or manufacturing processes
More informationCylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationProduct catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
More informationMechanical Cylinders
Mechanical Cylinders 1 Wormgear 2 Spherical plain bearings 3 Motor flange, IEC-norm 4 Lubricator 5 Air vent 6 Spindle nut 7 Trapezoidal spindle 8 Cylinder tube 9 Piston tube 10 Sealing 11 Wiper 12 Rotation
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationVacuum Gate Valve DN 100 and DN 150
Vacuum Gate Valve DN 100 and DN 150 WER Dok.E.02.050_02.051 1. Introduction/Safety Instructions 2. Description 3. Technical Data 4. Installation 5. Operation 6. Maintenance Instructions 7. Spare Parts
More informationDIY CNC: A REVIEW. dhaval.patel1@git.org.in. 382481, ani_kyadaauto@yahoo.co.in. Abstract
DIY CNC: A REVIEW Dhaval B. Patel 1 *, Aniruddh R. Kyada 2. 1 *Assistant Professor, Gandhinagar Institute of Technology, Gandhinagar 382721, dhaval.patel1@git.org.in 2 Assistant Professor, Silver Oak College
More informationDiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
More informationDOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More informationEXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
More informationLoad Frames. www.humboldtmfg.com 1.800.544.7220 708.468.6300
Lab Equipment Soil Lab Consolidation Load Frames 80 52 ConMatic IPC, Automated Consolidation System, 120/220V 50/60Hz HM-2470A.3F The ConMatic IPC is a fully-automated, incremental pressure controller
More informationTechnical News Bulletin
Technical News Bulletin January 2003 Two-way air operated Funnel Mechanism 200-2100 Up-Stroke Cushion Control Valve Top-mounted Check Valve Increased Stroke Rigid Cam Cam Roller Fixation Page 1/5 1. Description
More informationAlways Following the Sun
DLR Always Following the Sun Bearing solutions for tracking systems Photovoltaic & Solar Thermal Systems Photovoltaic and solar thermal systems: Improved performance with tracking systems with high-precision
More informationHOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY
More information