Form No , 7 8. Parts List for: RWP55 MODEL A HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW.

Transcription

1 Parts List for: Form No RWP55 MODEL A HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW 90 Elbow & Hose Assembly not shown in this view 3 4 To Parts List , Basic Pump Ass'y See sheet 3 of 5 2 Sheet No. of 5 Litho in USA Rev. 5 Date: 25 May 202

2 Part List, Form No. 0990, Back sheet of 5 Item Part No. Item Part No. No. No. Req'd Description No. No. Req'd Description Copper Tubing Elbow Fitting Air Valve Straight Nipple Fitting ft. Plastic Tubing Tee Fitting Straight Fitting (NOTE: Install #2328 Ftting into #0623 Tee Fitting. Install /4 NPTF end of #2328 into Port No. 3 of # Air Valve.) Cap Screw (/4-20 X -/4 Lg.) Elbow Fitting Air Valve Manifold 0006 Soc. Hd. Cap Screw (/4-20 X 5/8 Lg.) BK2 Reservoir 3 *559 Air Motor Ass y (Prior to 5--9; Keyed shaft; See back sheet 2 of 5) Straight Fitting Plastic Cup ElbowFitting Tee Fitting *Note: For air motor repair kit, order no To Drawing PRESSURE CONTROL VALVE NOTE: Set at 500/700 PSI Item Part No. No. No. Req'd Description 5456 Nipple Fitting Straight Fitting Relief Valve Ass y HAND CONTROL ASSEMBLY Item Part No. No. No. Req'd Description Push Button Retaining Ring Valve Cartridge (Including seals) Decal (Stop) Control Valve Body (Includes decals [Items 4 & 6]) Decal (Run)

3 Parts List Form No GENERAL ASS'Y TOP VIEW , Item Part No. Item Part No. No. No. Req'd Description No. No. Req'd Description Valve (See Form No. 0800) Drain Tube (Included but not shown) Screw (3/8-6 UNC x /2 Lg.) Seal Washer Elbow Fitting Oil Level / Thermometer Gauge Muffler Deflector Drive Screw Screw (/4-0 X 7/8 Lg.) ft. Pressure Hose Hose Clamp Straight Fitting ft. Plastic Tubing Elbow Fitting Air Valve Elbow Fitting Hose Assembly (25' Lg.) Straight Fitting Grommet Heat Exchanger Coil Jam Nut Straight Fitting Air Operated Hand Control (See back sheet of 5) Gauge (0,000 PSI, 4 dia.) Tee Fitting Straight Fitting Fitting (Supplied with valve) Muffler Straight Fitting (/2 x /2 BSPP) Sheet No. 2 of 5 Rev. 5 Date: 25 May 202

4 Parts List, Form No. 0990, Back sheet 2 of 5 AIR MOTOR ASSEMBLY Item Part No. Item Part No. No. No. Req'd Description No. No. Req'd Description 004 Cap Screw (/4-28 X Lg.) Machine Screw (/4-20 X /2 Lg.) Handle Bracket Washer Cap Screw (3/8-6 X 3 Lg.) Shaft Extension Set Screw (/4-20 UNC X /4 Lg.) Gasket Cap Screw (/4-20 X 3/4 Lg.) 3 558WH2 Motor Base 4 *477 Air Motor (See Form #638) Cap Screw (/4-28 X -/4 Lg.) Handle 559 Complete Air Motor Ass y (Includes Items through 6) *Note: For air motor repair kit, order no

5 Parts List Form No GENERAL PUMP ASSEMBLY To Parts List Sheet No. 3 of 5 Rev. 5 Date: 25 May 202

6 Parts List, Form No. 0990, Back sheet 3 of 5 Item Part No. Item Part No. No. No. Req d Description No. No. Req d Description Cap Screw (/4-20 X Lg.) Basic Pump Assembly (Includes all items on sheet 4 of 5 and items, 7, 8, 9,0,, 2, 3, 5 & 22 on this sheet) Vent Cap WH2 Cover Gasket External Pressure Regulator (See below) Elbow Fitting Valve Body Poppet Comp. Spring (3/8 O.D. X 3/4 Lg.) 026 Copper Washer (3/4 X 9/32 X /32) Connector (Torque to 40/45 in. lbs.) Cap Screw (/4-28 X Lg.; Torque to 80 in. lbs.) Relief Valve (Set at 0,00/0,700 PSI) O-ring (/4 X 3/8 X /6) O-ring (/2 X 3/8 X /6) PTFE Backup Washer Valve Connector Tube Sleeve Tube Nut Oil LIne To Drawing Filter Ass y (Includes Item #23) O-ring (3/6 X.644 X.087) Oil Line Tube Straight Fitting PRESSURE REGULATOR ASSEMBLY NOTE: Set at 0,00/0,700 PSI COVER PLATE Item Part No. Item Part No. No. No. Req d Description No. No. Req d Description Knob Adjustment Stem (Assemble to knob with Loctite No. 242 or equiv.) Jam Nut Regulator Housing Compression Spring (.00 O.D. X 2-/2 Lg.) Regulator Body Seat Fitting O-ring (.558 x.44 x.072) Poppet Spring Retainer (Grease pocket [both ends] before assembly) 2543 Spring (Assemble closed coils of spring form towards seat fitting [Item #7]) Locknut Backup Washer O-ring (3/8 X /4 X /6)

7 Parts List Form No BASIC PUMP ASS'Y To Parts List Sheet No. 4 of 5 Rev. 5 Date: 25 May 202

8 Parts List, Form No. 0990, Back sheet 4 of 5 Item Part No. No. No. Req'd Description Soc. Hd. Cap Screw (/4-20 X -/4 Lg.; Torque to in. lbs.) High Pressure Pump Ass y (See back sheet 5 of 5) Compression Spring (/4 O.D. X Lg.) Steel Ball (/4 Dia.) Bearing Top Plate Top Plate Thrust Bearing Bearing Race 9 84 Ball Bearing Angle Plate 955 Roll Pin (/4 Dia. X 3/4 Lg.) Needle Bearing Retaining Ring (-/8 Shaft) Shaft 5 82 Woodruff Key Gear Pump End Plate To Drawing Soc. Hd. Cap Screw (0-32 X -3/4 Lg.; Torque to 50 in. lbs.) Aluminum Coupling Needle Thrust Bearing (See diagram below) O-ring (/4 X 3/8 X /6) Drive Gear O-ring (7/8 X 3/4 X /6) Compression Spring (3/8 O.D. X 3/4 Lg.) Poppet Pump Body Pipe Plug (/8 NPTF) O-ring (/6 x /2 X 3/32) PTFE Backup Washer (/6 X /2 X /6) Spool Spring Guide Compression Spring ( O.D. X -3/6 Lg.) Spring Guide NEEDLE BEARING INSTALLATION SPECIFICATIONS When replacing the needle bearings on the drive gear of the basic pump, the dimensions shown must be as specified.

9 Parts List Form No HIGH PRESSURE PUMP ASSEMBLY To Parts List Sheet No. 5 of 5 Rev. 5 Date: 25 May 202

10 Parts List, Form No. 0990, Back sheet 5 of 5 #333 HIGH PRESSURE PUMP ASS'Y (3 Pistons - 9/32 Dia.) Item Part No. No. No. Req'd Description 0442 Copper Washer (3/8 X /4 X /32) Soc. Hd. Cap Screw (/4-20 NC X 3/8 Lg.; Torque to 40/60 in. lbs.) 3 * Valve Guide 4 * Compression Spring (.64 O.D. X.78 Lg.) 5 * Steel Ball (3/6 Dia.) 6 * Soc. Hd. Cap Screw (/4-28 NF X -/2 Lg.; Torque to 70/80 in. lbs.) 7 *504 Top Plate (Aluminum) Soc. Set Screw (/4-20 NC X 3/8 Lg.; Torque to 65/70 in. lbs.) 9 *40630 Valve Head 0 *4062 Pump Barrel * Piston Consult factory when replacing items marked with an asterisk (*). To Drawing BOLT TIGHTENING SEQUENCE NOTE: Assemble in sequence shown. Lubricate under head and on threads. Torque to 80 in. lbs. Refer to any operating instructions included with this product for detailed information about operation, testing, disassembly, reassembly, and preventive maintenance. Items found in this parts list have been carefully tested and selected. Therefore: Use only genuine Power Team replacement parts! Additional questions can be directed to our Technical Services Department.