3/2, 5/2, 5/3 Way. Installation & Application Data
|
|
- Mabel Rice
- 7 years ago
- Views:
Transcription
1 3/2, 5/2, 5/3 Way 3/2 Way, Mini, KCV Series 3 3/2 Way, Mini, Gang Mount Components, KCV Series 5 3/2 Way, Solenoid Spring, CKV200 Series 7 3/2 Way, Solenoid Solenoid, CKV300 Series 9 5/2 & 5/3 Way, Solenoid Spring, DKV200 Series 11 5/2 & 5/3 Way, Solenoid Solenoid, DKV300 Series 13 5/2 & 5/3 Way, Solenoid Spring Solenoid, DKV0 Series 15 5/2 Way, Namur Solenoid Spring, DKM Series 17 5/2 Way, Namur Solenoid Solenoid, DKM Series 17 Solenoid Coils 19 Solenoid Valve Manifolds 21 General Purpose Solenoid Valves Pilot Operated 23 Valve Timer 25 Direct Acting 27 ISO K Sub-based Valves Solenoid 29 Installation & Application Data Before installing, be sure the valve hasn t been damaged in transit. Use clean lubricated air filtered to µm. Be aware of the flow direction and port size. Please note whether the installation conditions meet the technical requirements (such as voltage, actuation frequency, working pressure and temperature) before installing the valve. Notice the flow direction of air during installation; P is the air input, A (B) is the outlet port, and R (S) is the exhaust port. Avoid freezing temperature and vibration. Before use ensure fittings and tubes are clean. Use PTFE tape correctly when connecting fittings. To stop the ingress of dust use silencers in the exhaust ports. After installation use the manual override to test the valve first. 1
2 2
3 3/2 Way, Mini, KCV Series Specification Model KCV1-M5 KCV1-06 Fluid Air (to be filtered by µm filter element) Acting Direct Port M5 1/8 Orifice Ø 1.2mm Valve Type 3/2 Operating Pressure 0-0.8MPa (0-114psi) Proof Pressure 1.5MPa (215psi) Temperature -20 to +70ºC Material of Body Aluminium Alloy Lubrication Not Required Coil Specification Item Specification Standard voltage 24V DC 110V 50/60Hz 220V 50/60Hz Scope of voltage AC : ± 15% DC : ± 10% Power consumption AC : 3.5VA DC : 3.0W Protection IP65 (DIN050) Temperature classification B Class Electriacal entry Terminal Activating time 0.05 sec Symbol Ordering Code K C V A Model Port Size Voltage KCV1 : Solenoid Valve 3/2 Way M5 : M5 B : 24V DC 06 : 1/8 C : 110V 50/60Hz A : 220V 50/60Hz Flow Chart Product Features 1 Direct acting. 2 Sub-based mounted. 3 Manual override. 4 Several standard voltages are available. 5 Several valves can be gang mounted together with the use of coupling screws and O-rings, saving space on installations. 6 Can be used as a stand alone valve. 7 Comes complete with Solenoid Coil & DIN Connector. Operating Pressure MPa Inlet pressure P1 Flow : L/min 3
4 3/2 Way, Mini, KCV Series Dimensions 76 2xø3.3( Thru. hole) 2xø5. 3( Counter sink) M5 3xM x1/ 8 A xM dp: P M Inner Structure No. Item 1 Connector 2 Gasket 3 Coil Nut 4 Coil Nut 5 Armature 6 O-ring 7 Return Spring 8 Body 4
5 3/2 Way, Mini, Gang Mount Components, KCV Series Ordering Code KCV1-P31 KCV1-P30 KCV1-P32 Long Coupling Screws & O-ring Short Coupling Screws & Fixing Nuts Base Plate & Fixing Screws Series Connection Dimensions 3 Gang Mounted Valves Base Plate =( 3 2 3) x M4x0.7dp Base Plate 2 xø How to Connect KCV1-P31 KCV1-P31 5 KCV1-P30 KCV1-P32 KCV1-P32
6 6
7 3/2 Way, CKV200 Series Specification Model CKV CKV CKV CKV Fluid Air(to be filtered by µm filter element) Acting Internal Piloted Port 1/8" 1/4" Orifice 14.0mm 2 (Cv=0.78) 16.0mm 2 (Cv=0.89) Valve Type 3/2 Lubrication Not required Operating Pressure MPa(21 114psi) Proof Pressure 1.5MPa(215psi) Temperature -20 to +70 C Material of Body Aluminum Alloy G threads as standard. PT & NPT threads are available on request. If using lubricants the practice must remain constant for the life of the valve. Lubricants like ISO VG32 or the equivalent are recommended Symbol Normally Open Normally Closed Ordering Code CKV NO Model CKV2 : 200 Series Solenoid Valve (3/2 way) Port size 06 : 1/8" 08 : 1/4" Valve type 10 : Single solenoid 20 : Double solenoid Acting type NC : Normally closed NO : Normally opened Thread type P : PT T : NPT BLANK : BSPP 1 Remark: 2 position double control solenoid valves have no differences between normally opened & normally closed, thus this code is blank. Product Features 1 Pilot-oriented mode is internally piloted. 2 Sliding spool has tight tolerances. 3 Double control solenoid valves have memory function. 4 Internal orifice adopts special processing technology giving low friction and long service life. 5 Lubrication is not necessary but once oil is introduced to the valve it must be continued. 6 Valves have manual override. 7 Several standard voltages are available. Flow Chart Model CKV NO Operating Pressure (M Pa) Flow L/min 7
8 3/2 Way, CKV200 Series Dimensions CKV210 Item CKV CKV A B C D CKV220 Item CK V CKV A B C D A B ø3.2 Manual override xø Inner structure 109 D C C D A B 2-ø xø4.2 Manual override CKV : 3 x 1/8" CKV : 3 x 1/4" CKV : 3 x 1/8" CKV : 3 x 1/4" Inner Structure No. Item No. Item No. Item 1 Fixed Plate 8 O-ring 15 Piston 2 Manual Override 9 Body 16 Pilot Screw 3 Override Spring 10 Spool Spring 17 O-ring 4 Piston O-ring 11 End Cover Gasket 18 Armature 5 Pilot Body 12 End Cover 19 Coil 6 Spool Packing 13 Screw 20 Coil Nut 7 Spool 14 Wearing Ring 21 Connector
9 3/2 Way, CKV300 Series Specification Model CKV CKV Fluid Acting Air (to be filtered by µm filter element) Internal Piloted Port 3/8" Orifice 30.0mm 2 (Cv=1.67) Valve Type 3/2 Symbol Normally Open Normally Closed Lubrication Operating Pressure Proof Pressure Temperature Material of Body Not required MPa(21 114psi) 1.5MPa(215psi) -20 to +70 C Aluminum Alloy G threads as standard. PT & NPT threads are available on request. If using lubricants the practice must remain constant for the life of the valve. Lubricants like ISO VG32 or the equivalent are recommended. Ordering Code CKV NO Model CKV : Solenoid Valve (3/2 way) 300 Series Port size 10 : 3/8" Valve type 10 : Single solenoid 20 : Double solenoid Acting type NC : Normally closed NO : Normally opened Thread type P : PT T : NPT BLANK : BSPP Product Features 1. Pilot-oriented mode is internally piloted. 2. Sliding spool has tight tolerances. 3. Double control solenoid valves have memory function. 4. Internal orifice adopts special processing technology giving low friction and long service life. 5. Lubrication is not necessary but once oil is introduced to the valve it must be continued. 6. Valves have manual override. 7. Several standard voltages are available. 1 Remark: 2 position double control solenoid valves have no differences between normally opened and normally closed state, thus this code is blank. Flow Chart Operating Pressure (MPa) Model CKV NO Flow L/min 9
10 3/2 Way, CKV300 Series Dimensions CKV :0 10: x ø4.3 Manual override 2x ø CKV x 1/4" CKV x 3/8" 2x ø CKV x 1/4" CKV x 3/8" CKV x ø Manual override :0 10: Inner Structure 10 No. Item No. Item No. Item 1 Fixed Plate 8 O-ring 15 Piston 2 Manual Override 9 Body 16 Pilot Screw 3 Ov erride Spring 10 Spool Spring 17 O-ring 4 Piston O-ring 11 End Cover Gasket 18 Armature 5 Pilot Body 12 End Cover 19 Coil 6 Spool Packing 13 Screw 20 Coil Nut 7 Spool 14 Wearing Ri ng 21 Connector
11 5/2 & 5/3 Way, DKV200 Series Specification Model DKV DKV DKV230C-06 DKV230E-06 DKV230P-06 DKV DKV DKV230C-08 DKV230E-08 DKV230P-08 Fluid Acting Air (to be filtered by µm filter element) Internal Piloted Port 1/8" Inlet & Outlet 1/4" Exhaust 1/8" Orifice 14.0mm 2 (Cv=0.78) 12.0mm 2 (Cv=0.67) 16.0mm 2 (Cv=0.89) 12.0mm 2 (Cv=0.67) Valve Type 5/2 5/3 5/2 5/3 Operating Pressure MPa(21 114p si) Proof Pressure Temperature Material of Body Lubrication 1.5MPa(215psi) -20 to +70 C Aluminum Alloy Not required Max. frequency 5 cycle/sec 3 cycle/sec 5 cycle/sec 3 cycle/sec Weight DKV g DKV g 360g DKV g DKV g 360g G threads as standard. PT & NPT threads are available on request. If using lubricants the practice must remain constant for the life of the valve. Lubricants like ISO VG32 or the equivalent are recommended. Ordering Code DKV Symbol Solenoid Spring Solenoid Solenoid Model DKV : Solenoid valve (5/2 & 5/3 way) Code 2 : 200 Series Valve type Port size 06 : 1/8" 08 : 1/4" Thread type P : PT T : NPT BLANK : BSPP 10 : Solenoid Spring 5/2 way 20 : Solenoid Solenoid 5/2 way 30C : Solenoid Spring Solenoid 5/3 way Fully Sealed 30E : Solenoid Spring Solenoid 5/3 way Supply Sealed 30P : Solenoid Spring Solenoid 5/3 way Centre Open Pressurised Supply Sealed Centre Open Pressurised Fully Sealed Please refer to Pages 21 & 22 for manifold specification and ordering information. Flow Charts Operating P ressure ( MPa ) Operating Pressure ( MPa ) Model : DKV Flow : L/min Model : DKV Flow : L /min Product Features 1 Pilot-oriented mode has optional internal or external pilots. 2 Sliding spool has tight tolerances. 3 Three position valves have three different central functions. 4 Double control solenoid valves have memory function. 5 Internal orifice adopts special processing technology giving low friction and long service life. 6 Lubrication is not necessary but once oil is introduced to the valve it must be continued. 7 Manifold bases are available for 5/2 valves to save installation space. 8 Valves have manual override for test purposes. 9 Several standard voltages are available. 11
12 5/2 & 5/3 Way, DKV200 Series Dimensions DKV Inner Structure x ø Model A B C D E DKV /8" 1/8" DKV /8" 1/4" x DKV220 x x ø Manual override Manual override 61 3 x x E 2x ø3.2 D C 2x ø3.2 D C E Model A B C D E DKV /8" 1/8" DKV /8" 1/4" DKV No. Item No. Item No. Item 1 Connector 9 Wearing Ring 17 Override Spring 2 Coil Nut 10 End Cover 18 Manual Override 3 Coil 11 Fixed Screw 19 Spring Holder 4 Armature 12 Spool Spring 20 Return Spring 5 Fixed Plate 13 End Cover Gasket 21 Side Cover x 2x ø Manual override 80 3 x D C 2x ø3.2 4V230(Grommet) 6 Piston 14 Spool O-ring 22 Spring Holder 7 Pilot Kit 15 Spool 8 Body 16 Piston O-ring E Model A B C D E DKV /8" 1/8" DKV /8" 1/4"
13 5/2 & 5/3 Way, DKV300 Series Specification Model Fluid Acting DKV DKV Air (to be filtered by µm filter element) Internal Piloted Port Inlet & Outlet 3/8" Ex haust 1/4" Orific e 30.0mm 2 (C v=1. 68) DKV330C-10 DKV 330E-10 DKV 330P mm 2 (Cv=1.00) Valve Type 5/2 5/3 Operating Pressure Proof Pressure MPa (21 114psi) 1.5MPa (215psi) Temperature -20 to +7 0 C Material of Body Lubrication Aluminum Alloy Not required Max. frequency 4 cycle/sec 3 cycle/sec Weight DKV DKV g 0g 450g Ordering Code DKV Symbol Solenoid Spring Solenoid Solenoid Model DKV : Solenoid Valve (5/2 & 5/3 way) Code 3 : 300 Series Valve type Port size 10 : 3/8" 10 : Solenoid Spring 5/2 way 20 : Solenoid Solenoid 5/2 way 30C : Solenoid Spring Solenoid 5/3 way Fully Sealed Thread type P : PT T : NPT BLANK : BSPP 30E : Solenoid Spring Solenoid 5/3 way Supply Sealed 30P : Solenoid Spring Solenoid 5/3 way Centre Open Pressurised Fully Sealed Centre Open Pressurised Supply Sealed Please refer to Pages 21 & 22 for manifold specification and ordering information. Flow Chart Operating Pressure ( MPa ) Operating Pressure ( MPa ) Model : DKV Flow L/min Model : DKV Flow L/min Product Features 1 Pilot-oriented mode has optional internal or external pilots. 2 Sliding spool has tight tolerances. 3 Three position valves have three different central functions. 4 Double control solenoid valves have memory function. 5 Internal orifice adopts special processing technology giving low friction and long service life. 6 Lubrication is not necessary but once oil is introduced to the valve it must be continued. 7 Manifold bases are available for 5/2 valves to save installation space. 8 Valves have manual override for test purposes. 9 Several standard voltages are available. 13
14 5/2 & 5/3 Way, DKV300 Series Dimensions DKV Inner Structure xA 2x ø Manual override x 2x ø Model A B C D E DKV /4" 3/8" DKV xA x ø Manual override x 2x ø Model A B C D E DKV /4" 3/8" No. Item No. Item No. Item 1 Connector 9 Wearing Ring 17 Override Spring DKV Coil Nut 10 End Cover 18 Manual Override 3 Coil 11 Fixed Screw 19 Spring Holder 4 Armature 12 Spool Spring 20 Return Spring 5 Fixed Plate 13 End Cover Gasket 21 Side Cover 6 Piston 14 Spool O-ring 22 Spring Holder 7 Pilot Kit 15 Spool 8 Body 16 Piston O-ring x A x ø Manual override 99 x x ø4.3 D C Model A B C D E DKV /4" 3/8"
15 5/2 & 5/3 Way, DKV0 Series Specification Model DKV DKV DKV430C-15 DKV430E-15 DKV430P-15 Fluid Air (to be filtered by µm filter element) Acting Internal Piloted Port 1/2" Orifice 50.0mm 2 (Cv=2.79) 30.0mm 2 (Cv=1. 68) Valve Type 5/2 5/3 Operating Pressure MPa (21 114psi) Proof Pressure 1.5MPa (215psi) Temperature -20 to +7 0 C Material of Body Aluminum Alloy Lubrication Not required Max. frequency 3 cycle/sec Weight 590g 720g 770g Symbol Solenoid Spring Ordering Code DKV Solenoid Solenoid Model 4V : Solenoid Valve (5/2 & 5/3 way) Code 4 : 0 Series Valve type Port size 15 : 1/2" 10 : Solenoid Spring 5/2 way Thread type P : PT T : NPT BLANK : BSPP 20 : Solenoid Solenoid 5/2 way 30C : Solenoid Spring Solenoid 5/3 way Fully Sealed 30E : Solenoid Spring Solenoid 5/3 way Supply Sealed 30P : Solenoid Spring Solenoid 5/3 way Centre Open Pressurised Fully Sealed Supply Sealed Please refer to Pages 21 & 22 for manifold specification and ordering information. Product Features 1 Pilot-oriented mode has optional internal or external pilots. 2 Sliding spool has tight tolerances. 3 Three position valves have three different central functions. 4 Double control solenoid valves have memory function. 5 Internal orifice adopts special processing technology giving low friction and long service life. 6 Lubrication is not necessary but once oil is introduced to the valve it must be continued. 7 Manifold bases are available for 5/2 valves to save installation space. 8 Valves have manual override for test purposes. 9 Several standard voltages are available. Flow Chart Operating Pressure ( MPa ) Centre Open Pressurised Model : DKV Model : DKV Flow L/min 15
16 5/2 & 5/3 Way, DKV0 Series Dimensions DKV Inner Structure x 1/2" x ø Manual override x ø DKV x 1/2" 2 x ø x ø Manual override DKV No. Item No. Item No. Item 1 Connector 9 Wearing Ring 17 Override Spring 2 Coil Nut 10 Bottom Cover 18 Manual Override 3 Coil 11 Fixed Screw 19 Spring Holder 4 Armature 12 Spool Spring 20 Return Spring 5 Fixed Plate 13 End Cover Gasket 21 Side Cover 6 Piston 14 Spool O-ring 22 Spring Holder 7 Pilot Kit 15 Spool 8 Body 16 Piston O-ring 5x 1/2" 2 x ø (Ter 2 x ø mina Manual override
17 5/2 Way, Namur, DKM Series Specification Model DKM DKM DKM DKM Fluid Ai r (to be filtered by µm filter element Acting Internal Piloted Port 1/4" Inlet 3/8" Exhaust 1/4" Orifice 25.0mm 2 (Cv=1.) 30.0mm 2 (Cv=1.68) Valve Type 5/2 Operating Pressure MPa (21 114psi) Proof Pressure 1.5MPa (215psi) Temperature -20 to +70 C Material of Body Aluminum Alloy Lubrication Not required Max. frequency 4 cycle / sec Weight DKM g DKM320 0g Ordering Code DKM Symbol Solenoid Spring Code 3 : 300 Series Model DKM : Solenoid Valve (5/2 way NAMUR type) Valve type Port size 08 : 1/4" 10 : 3/8" 10 : Solenoid Spring 5/2 way 20 : Solenoid Solenoid 5/2 way Thread type P : PT T : NPT BLANK : BSPP Solenoid/Solenoid Please refer to Pages 21 & 22 for manifold specification and ordering information. Flow Chart Operating Pressure ( MPa ) Operating Pressure ( MPa ) Model : DKM Flow L/min Model : DKM Flow L/min Product Features 1 Internal pilot. 2 Sliding spool has tight tolerances. 3 Double control solenoid valves have memory function. 4 Internal orifice adopts special processing technology giving low friction and long service life. 5 Lubrication is not necessary but once oil is introduced to the valve it must be continue. 6 Valves can be mounted directly onto Namur actuators. 7 Valves have manual override. 8 Several standard voltages are available. 17
18 5/2 Way, Namur, DKM Series Dimensions DKM310 Manualoverride 2 x ø M31008 x 1/4" 4M31010 x 3/8" 1/4" Manualoverride 2 x ø5.2 DKM M31008 x 1/4" 4M31010 x 3/8" 1/4" x ø19.2 dp : x ø19.2 dp : Inner Structure 18 No. Item No. Item 1 Connector 10 End Cover 2 Coil Nut 11 Fixed Screw 3 Coil 12 Spool Spring 4 Armature 13 End Cover Gasket 5 Fixed Plate 14 Spool O-ring 6 Piston 15 Spool 7 Pilot Kit 16 Piston O-ring 8 Body 17 Override Spring 9 Wearing Ring 18 Manual Override
19 Solenoid Coils Specification Standard voltage AC220V AC110V AC24V DC24V DC12V Scope of voltage AC ±15% DC ±10% Power consumption AC 2. 5VA DC 2.5W AC 3.5VA DC 3.0W Protection IP65 DIN050 Temperature classification B Class Electrical entry Terminal Activating time 0.05 sec Ordering Code K-12DC 12V DC K24DC 24V DC K-24AC 24V 50/60Hz K-110AC K-220AC 110V 50/60Hz 220V 50/60Hz 1 to positive pole 2 to negative pole Coil terminal with DC specification has polar indicator lights, thus when wiring, please notice positive and negative poles, 1 shall be connected to positive pole, 2 to negative pole. If the poles are connected incorrectly, the indicator lights will not light up but the valve will still actuate. 19
20 20
21 Solenoid Valve Manifolds Specification Model A00KM B00KM C00KM D00KM Fluid Air (to be filtered by µm filter element) Temperature -20 to +70ºC To Suit 200 Series 200 Series 300 Series 0 Series Ordering Code For Manifold A F Model A00M : 1/8 BSP B00KM : 1/4 BSP C00KM : 3/8 BSP D00KM : 1/2 BSP Number of Stations 1F : 1 2F : 2 16F : 16 A00M and B00KM series both have a maximum of 16 stations; C00KM series have a maximum of 12 stations; D00KM series have a maximum of 8 stations. Product Features 1 Use with direction 5/2 and 5/3 valves of the same series to save space and costs. 2 Easy fault finding with common air intake and exhaust unified wiring. 3 Flexible system can be expanded easily. Ordering Code For Blanking Plate A 0 0 K M B Model A00KM : A Series : 1/8 BSP B00KM : B Series : 1/4 BSP C00KM : C Series : 3/8 BSP D00KM : D Series : 1/2 BSP A00M series have a maximum of 16 stations; B00KM series have a maximum of 16 stations; C00KM series have a maximum of 12 stations; D00KM series have a maximum of 8 stations. 21
22 Solenoid Valve Manifolds Dimensions øe Blanking plate L Model A B C D E F G H I J 2F 3F 4F 5F 6F 7F 8F 9F 10F B00KM C00KM D00KM Model L P 11F 12F 13F 14F 15F 16F 1F 2F 3F 4F 5F 6F 7F 8F 9F 10F 11F 12F 13F 14F 15F 16F B00KM C00KM D00KM øe Model K K 1 M1 M 1 Q R S T U V W X Y 5F 6F 7F 8F 9F 10F B00KM / C00KM / Blanking plate D00KM / L Model / Item A B C E F G H I J 1F 2F 3F 4F 5F 6F 7F 8F 9F 10F 11F 12F A00M B00KM C00KM D00KM Model / Item L 13F 14F 15F 16F 1F 2F 3F 4F 5F 6F 7F 8F 9F 10F 11F 12F 13F 14F 15F 16F A00M B00KM C00KM D00KM Model / Item K K1 M (Pilot) M1 (Sol) Q R S T U V W X Y A00M / B00KM / C00KM / D00KM / P
23 Pilot Operated, General Purpose Solenoid Valves Specification Model K K K K K K K Fluid Operation Type Material of Seal Air, Water & Oil Pilot Normally Open & Normally Closed NBR Orifice mm Flow Rate l/pm Port Size 3/8 1/2 3/ /4 1.1/2 2 Fluid Viscosity 50 CST Max Pressure 0.05 to 0.98MPa (7-142psi) Symbols Normally Closed Normally Open Working Pressure Temperature 0.15MPa -5 to +80 C Ordering Code K AC NO Code Port Size Voltage Operation Two position, two way, brass, pilot operated solenoid 03 : 3/8 04 : 1/2 06 : 3/4 08 : 1 12 : 1.1/4 14 : 1.1/2 20 : 2 230AC : 230/50V AC 110AC : 110/50V AC 24AC : 24/50V AC 24DC : 24V DC 12DC : 12V DC NO : Normally Open NC : Normally Closed Product Features 1 2/2 operation. 2 Sizes 3/8 to 2 BSPP. 3 Available in both Normally Open and Normally Closed functions. 4 Valve Timer optional. 5 Spare coils available in: 230/50V AC 110/50V AC 24/50V AC 24V DC 12V DC 23
24 Pilot Operated, General Purpose Solenoid Valves Flow Charts K K Operating Pressure (Mpa) Operating Pressure (Mpa) Flow L/min Flow L/min K K Operating Pressure (Mpa) Operating Pressure (Mpa) Flow L/min Flow L/min Dimensions Model Port A mm B mm C mm K / K / K / K K / K / K
25 Valve Timer For use with General Purpose Pilot Operated Valves K225 Specification / Ordering Code Model Voltage Range Protection Class KVT 24 to 2V IP65 Product Features 1 Suitable for use with Pilot Operated General Purpose Solenoid Valves K Also Suitable for DIN 43650B Socket Type Coil. 3 Can be used with both Normally Open & Normally Closed. 25
26 26
27 Direct Acting, General Purpose Solenoid Valves Specification Model K2W K2W K2W0-10 K2WH K2WH K2WH Fluid Operation Type Material of Seal Air, Water & Oil Direct Acting Normally Closed NBR Orifice mm Flow Rate l/pm Port Size 1/8 1/4 3/8 1/8 1/4 3/8 Fluid Viscosity 20 CST Max Pressure 0.00 to 0.98MPa (0-142psi) 0.00 to 3.MPa (0-497psi) Working Pressure 0.00 to 0.68MPa (0-99psi) 0.00 to 1.96MPa (0-284psi) Temperature -5 to +80 C Symbol Normally Closed Ordering Code K 2 W H AC Code Pressure Orifice mm Port Size Voltage Two position, two way, brass, direct acting solenoid Blank : Standard H : High Pressure 012 : : AC : 230/50V AC 110AC : 110/50V AC 025 : AC : 24/50 V AC 0 : DC : 24V DC 12DC : 12V DC Flow Charts Air 06 : 1/8 08 : 1/4 10 : 3/8 Water Product Features 1 2/2 operation. 2 Sizes 1/8 to 3/8 BSPP. 3 Available in Normally Closed function. 4 Spare coils available in: 230/50V AC 110/50V AC 24/50V AC 24V DC 12V DC Flow L/min Operating Pressure (Mpa) Operating Pressure (Mpa) Flow L/min 27
28 Direct Acting, General Purpose Solenoid Valves Dimensions Model Port (K) A mm B mm C mm D mm K2W / K2W / K2W0-10 3/ K2WH / K2WH / K2WH /
29 ISO K Sub-based Valves Solenoid Specification Model 200 Series 300 Series 0 Series 600 Series Fluid Acting Lubrication 1 Operating Pressure Internal Pilot External Pilot Control Pressure (External Pilot) Proof Pressure Air (to be filtered by µm filter element) Internal pilot or external pilot Not required Mpa (29-145psi) Mpa (0-145psi) Mpa (29-145psi) 1.5 Mpa (215psi) Temperature ºC Port Size (Manifold) 1/4 3/8 1/2 3/4 Port Size (End Plate) 3/8 1/2 3/4 1 Voltage Range AC: ± 15% DC: ± 10% Power Consumption AC: 3.5VA DC: 3.0W Activating Time 10\20 Series 33\41ms 42\55ms 50\68ms 55\85ms (0.5MPa) Open\Close 30 C\E\P Series 38\50ms 52\62ms 52\68ms 55\85ms Insulation Class B Protection IP65 Installation Size ISO standard 1 Note: once lubricated air is used, continue with same medium to optimise valve life span. Lubricants like ISO VG32 or equivalent are recommended. Product Features 1 Succinct appearance and compact conformation. 2 The installation size conforms to the ISO 5599/1 standard. 3 Special seals improve flow rate and enhance lifetime of product. 4 The installation direction of the pilot O-ring can be adjusted to change the acting type to internal pilot, external pilot or air control. 5 The valve(s) should be installed together with the KELM single or parallel type manifolds. 6 Easy to install various connection and installation methods for manifolds. 7 The manifold has an exhaust dampener no need to connect to separate silencer. Symbols 5/2 Solenoid/Spring 5/2 Solenoid/Solenoid 5/3 Solenoid/Solenoid, Fully Sealed Mid Position APB 5/3 Solenoid/Solenoid, Supply Sealed Mid Position COE 5/3 Solenoid/Solenoid, Centre Open Pressurised Mid Position COP Ordering Code K 5 S V 4 30 I C Model Code Valve Type Pilot Type Voltage K5SV:ISO standard solenoid valve 2 : 200 series 3 : 300 series 10 : Solenoid Spring 5/2 way 20 : Solenoid Solenoid 5/2 way I : Internal Pilot E : External Pilot A : AC220V B : DC24V 4 : 0 series 6 : 600 series 30C : Solenoid Spring Solenoid 5/3 way Fully Sealed 30E : Solenoid Spring Solenoid 5/3 way Supply Sealed 30P : Solenoid Spring Solenoid 5/3 way Centre Open Pressurised C : AC110V E : AC24V F : DC12V 29
30 ISO K Sub-based Valves Solenoid Flow Charts 200 Series 300 Series 0 Series 600 Series Inner Structure 30
31 ISO K Sub-based Valves Solenoid Dimensions 200 Series All sizes are in millimetres unless stated otherwise. Dimensions 300 Series All sizes are in millimetres unless stated otherwise. Single Solenoid Single Solenoid Double Solenoid Double Solenoid 5/3 Double Solenoid 5/3 Double Solenoid 31
32 ISO K Sub-based Valves Solenoid Dimensions 0 Series All sizes are in millimetres unless stated otherwise. Dimensions 600 Series All sizes are in millimetres unless stated otherwise. Single Solenoid Single Solenoid Double Solenoid Double Solenoid 5/3 Double Solenoid 32
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
More informationUM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
More information3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More informationElectrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
More information97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationUM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More information4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationSOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
More informationFluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
More information2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
More informationtype V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
More information5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm
More information3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
More informationSolenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
More information3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationInrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
More information2.12. page 223 2.12. Products for Explosion hazardous Environment
2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available
More informationSolenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot
More information3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
More informationSystem 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More information4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More information3/2-way pneumatic cartridge solenoid valve
3/2-way pneumatic cartridge solenoid valve Compact design with 11 mm width per station Orifices from 0.5 mm (9 bar) to 1.2 mm (1.5 bar) High durability and reliability Low power consumption, as well as
More information2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
More informationG1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationRPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
More information-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () NBR aluminium AA series/u1-u,5
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More information% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
.55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard
More informationElectro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
More informationSTC 3S012-020-A Series Solenoid Valves
STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,
More informationCheck Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits
Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot
More informationDirectional seated valves type VP 1
Directional seated valves type VP 1 zero leakage, intended for general hydraulic applications and grease lubing systems Flow Q max Operation pressure p max = 15 lpm = 400 bar Individual valve Individual
More information3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
More informationzamak nitrile rubber self-extinguishing technopolymer aluminum
PS COMBOBOX valves - Valves with compact design: valve body with integrated sub-base - High flexibility: > possibility of choosing fitting dimension (--) according to users needs > manifolds from up to
More informationCartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
More informationsize 3 15 4200 size 4 19 6600
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
More informationSensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationPressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits.
Vickers Pressure Relief Pressure Relief and Sequence Valves CG2V-6/8, 1 Series; CG5V-6/8, 2 Series Typical Section CG2V-6*W-1 relief valve Basic Characteristics Maximum pressure.......... 35 bar (5 psi)
More informationE4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
More informationValves. Sub-Base Mounted Valves to ISO 5599/2
Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great
More information10 mm Solenoid Valves. 0,6 W Power Consumption. 10,5 mm wide. 230 l/min air-flow. Service friendly design. High quality solenoid system
10 mm Solenoid Valves 0,6 W Power Consumption 230 l/min air-flow 10,5 mm wide Service friendly design High quality solenoid system Table of Contents page 2 page 5/2 way in-line valves 3 MMD 510 301 24DC
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationzamak nitrile rubber selfestinguishing technopolymer aluminum B10 24 V DC (± 10%) holding 0,32 W, pick-up 5,5 W (25 ms) IP65 button with tool
P0 0mm COMPCT valves - threaded body and for sub-base mounting - Low standard power consumption (0,W): low power consumption electropilot B0 (standard version with LED) - Quick response times - High flow
More informationSpecifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
More informationSolenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working
More informationzamak nitrile rubber self-extinguishing technopolymes aluminum
G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
More informationSOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
More informationCable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
More information0.35 0.9. 3 Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3
Port Solenoid Valve 00/00/00 Metal Seal Rubber Seal 0. 0.9 (Standard) (High pressure type, High speed response type) Power consumption: 0. W/0.9 W Compact, High Flow Body ported Base mounted 00 00 00 00
More informationOn-off valves MS-EM/EE, MS series, NPT
On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12
More informationSolenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SF-2C-115A-35 S-1AY-12D-35 SD-2C-12D-35 Features High Flow/ High Pressure: Up to 40 gpm / 5000 psi working pressure*.
More informationSQUARE D INDUSTRIAL CONTROL PRODUCTS
SQUARE D INDUSTRIAL CONTROL PRODUCTS CLASS 9012 3a INDUSTRIAL PRESSURE SWITCHES Type A Heavy duty switch for virtually any industrial application involving air, water, steam or oil Bellows, piston and
More informationElectro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
More informationSPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4
SPOO & SV VAVS monostable / bistable function threaded ports -G 1/ 5/-5/3 Series 1 FATURS Reliability: steel spool & sleeve technology with long service life Robust valve design, particularly recommended
More informationSolenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
More informationSTC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting
STC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting Female NPT Thread 3/8 OD Tube 3/8 Push-In Fitting 2P050 Series Solenoid Valve Specifications Valve Model 2P050-1/4 2P050-3/8
More informationD634-P Series Direct Drive Proportional Valve with Integrated 24 V Electronics ISO 4401 Size 05
D634-P Series Direct Drive Proportional Valve with Integrated 24 V Electronics ISO 4401 Size 05 GENERAL SECTION PAGE MOOG SERVO- AND PROPORTIONAL CONTROL VALVES General 2 enefits and Functionality 3 General
More information3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
More informationControl- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
More informationFlow switches Series AD/VH
Flow switches Flow switch and indicator for liquids and gases Suitable for clear, opaque or turbid liquids (series AD & VH), and for gases (series AD) Flow switching by means of magnetic coupling, watertight,
More information2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
More information2 position single. (Standard) 100V AC 50/60Hz 200V AC 50/60Hz 24V DC. 2 position double
4/ Port Solenoid Valve Rubber Seal VZ1000/000/000 Solenoid Valve Variations Port Size Effective area (mm 2 ) Position solenoid Voltage Electrical entry Option/ Indicator light and surge voltage suppressor
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationPlastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
More informationPressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations
VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................
More informationCentro-Matic Automatic Lubrication Systems System Controls
Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several different models may be chosen to control power-operated pumps, depending on the
More informationSolenoid/pneumatic valves, Tiger Classic
Solenoid/pneumatic valves, Tiger Classic Electrically or pneumatically actuated valves With internal or external pilot air Sturdy and reliable Specified types in accordance with ATEX directive for potentially
More informationM A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
More informationMANTA Piston Distributor for Oil and Fluid Grease
MANTA Piston Distributor for Oil and Fluid Grease Function Piston distributors meter out and distribute the oil delivered by an intermittently actuated pump. The quantities of oil for the individual lube
More informationCoil Classification: Class F standard, Class H available Class B standard on V9xx models
Direct Acting & Pilot Operated Valves 1/8" - 1/2" General Description: Direct Acting and Pilot Operated valves are used in applications for actuation of double acting cylinders and piloting of larger control
More informationVSO MAX HP High Flow Proportional Valve
VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties
More informationPrecision Regulator. Series IR1000/2000/3000 ARJ AMR ARM ARP IR IRV VEX1 SRH SRP SRF ARX20 VCHR ITV IC PVQ VER VEA VY2 AP100.
Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.
More informationDXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
More informationSafety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
More informationHow To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
More informationISO 15407-1/2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves
BD ISO 0/ (VDM ) ISO 0 ( mm) ISO 0 ( mm) Valves BDE = solenoid valves ISO 0/ with integrated connection including V DC coils and connector BDB = solenoid valves ISO 0/ with external connection with M connector
More informationProportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F040-1/E Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 AGMZO are two stage poppet type proportional
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationCircuit Breakers. NRC Series. NRC Series. 900 www.idec.com
Switches & Pilot Lights Display Lights NRC series circuit breakers offer circuit protection which is far superior to using fuses in applications containing relay circuits, motor circuits, heater circuits,
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV
More informationModel 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve
High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its
More informationWater Separator. Main Line Filter. Mist Separator. Micro Mist Separator 150C 250C 350C 450C AMG 550C 2C 4C 8C 11C AFF 22C 37B 75B 150C 250C 350C 450C
Water droplet removal Water Separator Water droplet separation rate: % Model Flow capacity l/min (ANR) Max. flow capacity at 0.7 MPa inlet pressure 300 750 1,500 AMG 2,0 AMG to AMG/ Large dust particle
More informationSolenoid valves VOFC Key features
Valve series VOFC Solenoid valves VOFC Key features General information The valves in the VOFC series are special 3/2-way and 5/2-way valves for process automation, for use within chemical and petrochemical
More informationPilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
More informationARB AIR LOCKER Air Operated Locking Differentials
CKMTA12 & CKMTA24 On-Board Air Compressor Kit, Maximum Performance Specs: ITEM # QTY DESCRIPTION PART # NOTES 01(a) 2 COMPRESSOR ASSEMBLY (12V) CKM01 1 Voltage 12 Volts (CKMTA12), 24 Volts (CKMTA24) 01(b)
More informationStandard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
More informationDSE5J 83 280/112 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL FEEDBACK AND INTEGRATED ELECTRONICS SERIES 10 SUBPLATE MOUNTING ISO 4401-05 (CETOP 05)
83 280/112 ED DSE5J DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL FEEDBACK AND INTEGRATED ELECTRONICS SERIES 10 SUBPLATE MOUNTING ISO 4401-05 (CETOP 05) p max 320 bar Q max 180 l/min MOUNTING SURFACE OPERATING
More information5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Model position position Type of actuation
More informationSolenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
More informationDigital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More information