KM/55001/M, Roundline cylinders Stainless steel Magnetic piston, double acting
|
|
|
- Erick Harrell
- 7 years ago
- Views:
Transcription
1 KM/5500/M, oundline cylinders > >... 5 mm > > Clean line design > > High corrosion and acid resistance > > Magnetic piston as standard > > Suitable for applications in the food industry > > Special wiper/seal as standard Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Operation: Double acting, magnetic piston, adjustable cushioning Operating pressure:... 0 bar (... 5 psi) Cylinder diameters:... 5 mmm Non-standard strokes: Non-standard strokes (600 mm max. available) Operating temperature: -0 C C ( F) Maximum 50 C (+ F) heat resistant seals ir supply must be dry enough to avoid ice formation at temperatures below + C (+ F). Materials: arrel: 5 Cr Ni 8 0 (.; ISI ) End covers: 0 Cr Ni S 8 9 (.5; ISI ) Piston rod: 0 Cr Ni S 8 9 (.5; ISI ) O-rings: FPM Piston seal: PU Cushion seal: N Technical data Cylinder (mm) Port size G /8 G / G / G /8 G /8 G / G / Piston rod (mm) Piston rod thread (mm) M0 x,5 M x,5 M6 x,5 M6 x,5 M0 x,5 M0 x,5 M7 x Cushion length (mm) 9 7 Theoretical thrusts at 6 bar outstroke (N) Theoretical thrusts at 6 bar instroke (N) ir consumption at 6 bar outstroke (l/cm) 0,056 0,088 0,7 0,8 0, 0,55 0,86 ir consumption at 6 bar instroke (l/cm) 0,08 0,07 0, 0,95 0, 0,5 0,79 without notice, the specifications given in this document. (998-09d) 05 Norgren GmbH 05/6 en
2 KM/5500/M, oundline cylinders Cylinder variants Symbol magnetic piston Description Dimensions Page KM/55000/M Standard cylinders with female threads on rear end cover for trunning mounting KM/55000/MF Cylinders with threaded front end cover KM/55000/MFT Standard cylinders with female threads on front end cover for trunning mounting KM/55000/M/D Cylinders with integral clevis mounting 5 KM/55000/M/ Cylinders with integral rear eye mounting 5 KM/55000/M/U Cylinders with integral universal rear eye mounting 5 TKM/55000/M High temperature cylinders, 50 C max. KM/55000/MU Standard cylinders with extended piston rod and female threads on rear end cover for trunning mounting KM/55000/JM Cylinders with double ended piston rod and threaded front end covers ( to 6 mm) For the cylinder of alternative options consult our technical service Option selector Piston rod material Stainless steel martensitic (standard) Hard chromium plated Stainless steel austenitic Cylinder (mm) Substitute C S Substitute KM/55 / / / Strokes (mm) 600 max. Cylinder with integral mountings Integral clevis mounting Integral rear eye mounting Substitute D Integral universal rear eye mounting U Variants Standard, female threads on rear end cover for trunning mounting Threaded front end cover Standard, female threads on front end cover for trunning trounting Double ended piston rod (ø... 6 mm),threaded front end cover *KM/55****/MU/****/*** Substitute M MF MFT JM MU Extension (mm) en without notice, the specifications given in this document. (998-09d) 05 Norgren GmbH 05/6
3 KM/5500/M, oundline cylinders Materials of mountings and accessories Standard cylinders Cylinder variant Position Style Stainless steel Position Style Stainless steel /G Flange mounting: 5 Cr Ni 8 0 (.; ISI ) 5 F Piston rod clevis mounting: 0 Cr Ni S 8 9 (.5; ISI C Foot mounting: 5 Cr Ni 8 0 (.; ISI ) 7 UF ody: 5 Cr Ni 8 0 (.; ISI ), Inner ring: 05 Cr Co 8- (.58), Outer ring: 0 Cr Ni S 8 9 (.5; ISI ) 6 ear hinge mounting: 5 Cr Ni 8 0 (.; ISI ), bolt: 0 Cr Ni S 8 9 (.5; ISI ), eyebolt: 0 Cr Ni S 8 9 (.5; ISI ) 9 Nose nut 0 Cr Ni S 8 9 (.5; ISI ) H Central trunnion: 0 Cr Ni S 8 9 (.5; ISI ) racket ody ø mm POM, ø 00 & 5 mm stainless steel for Screws stainless steel switches Cyl., G C F H (mm) N Page M/P76 KQM/805/ UF KQM/5500/ M/P77 KQM/800/ M/P KQM/556/ KQM/555/5 QM/556/8 KQM/55050/ M/P78 KQM/5506/ M/P78 KQM/555/ KQM/555/5 QM/5550/8 KQM/8050/ 6 6 KQM/8050/ KQ/8080/5 QM/5580/8 KQM/55080/ KQM/8080/ 00 KQ/8080/5 QM/550/8 KQM/5500/ KQM/8080/ 5 KQ/85/5 QM/555/8 KQM/555/ KQM/85/ Cyl. Switch mounting Page 7 7 QM/// 8 9 QM//0/ 9 Magnetically operated switches Service kit 0 Page 8 & 9 KQM/550/00 KQM/5500/00 QM//50/ KQM/55050/00 QM//6/ KQM/5506/00 80 QM//80/ KQM/55080/00 00 QM//00/ KQM/5500/00 5 QM//5/ KQM/555/ / (mm) KQM/550/ KQM/55/ KQM/55/5 QM/550/8 0 M/P M/P M/P97 KQM/55/ KQM/55/5 QM/55/8 6 9 without notice, the specifications given in this document. (998-09d) 05 Norgren GmbH en
4 KM/5500/M, oundline cylinders Dimensions Standard cylinders KM/5500/M Standard cylinders with female threads on rear end cover for trunning mounting G D TC M KW WH P + # EE EE P Cylinder variant KM/5500/MFT Standard cylinders with female threads on front end cover for trunning mounting T ø MM KK KV SW J + # G # Stroke Cushion screw M G D EE KK KV KW MM P P T SW TC WH G kg at 0 mm kg per 5 mm 6 6 G /8 M0 x, M8 x 0,5 8,5 7 0,78 0,06 KM/550/M/* 0 8 G / M x, , M0 x ,6 0,09 KM/550/M/* 50 9,5 5 G / M6 x, M x, ,5 0, KM/5505/M/* G /8 M6 x, M x, ,78 0,6 KM/5506/M/* G /8 M0 x, M6 x,5 8, ,99 0,5 KM/5508/M/* G / M0 x, M0 x,5 0, ,6 0,9 KM/550/M/* G / M7 x,5 7,5 6,5 M x,5 7 8,5 0 07,5 8,5 5,97 0,8 KM/556/M/* Cylinder variants KM/5500/JM Cylinders with double ended piston rod and threaded front end covers KM/5500/MF Cylinders with threaded front end cover M + x # 8 + # WH F KW 8 + # + # ø E ø h9 KV V 8 M 9 70 KM/550/JM/* KM/550/JM/* 50 KM/5505/JM/* 6 KM/5506/JM/* h9 E F KV KW 8 V WH Mx, KM/550/MF/* 0 8 M8x, KM/550/MF/* 50 5 M5x, KM/5505/MF/* 6 5 M5x, KM/5506/MF/* en without notice, the specifications given in this document. (998-09d) 05 Norgren GmbH 05/6
5 KM/5500/M, oundline cylinders Cylinder variant KM/5500/M/D cylinder with integral clevis mounting + # ø mm + # P ø CD H9 P EW EW T # stroke CDH9 EW EW+0, P T kg at 0 mm kg per 5 mm 0 6,5 6, ,78 0,06 KM/550/M/D/* 0 6 6,5 9, , 0,09 KM/550/M/D/* 50 6,5, , 0, KM/5505/M/D/* 6 6 6,5 5, ,7 0,6 KM/5506/M/D/* KM/5500/M/ cylinder with integral rear eye mounting + # CDH9 EW P T kg at 0 mm kg per 5 mm 0 5,8 9, ,9 0,06 KM/550/M//* 0 7, ,7 0,09 KM/550/M//* 50,7, , 0, KM/5505/M//* 6 6 9,7 6 5, ,98 0,6 KM/5506/M//* , ,0 0,5 KM/5508/M//* , ,5 0,9 KM/550/M//* EW + # P ø CD H9 T KM/5500/M/U cylinder with integral universal rear eye mounting + # + # CNH7 EN- 0, P T kg at 0 mm kg per 5 mm 0 6,5 7,5 58 0,8 kg 0,06 KM/550/M/U/* , , kg 0,09 KM/550/M/U/* 50 6, , kg 0, KM/5505/M/U/* ,5 90 5,8 kg 0,6 KM/5506/M/U/* , , kg 0,5 KM/5508/M/U/* ,5 5 60,6 kg 0,9 KM/550/M/U/* P CN H7 T EN -0, 05/6 without notice, the specifications given in this document. (998-09d) 05 Norgren GmbH en
6 KM/5500/M, oundline cylinders Mountings ear flange, front flange G Foot C MF UF TF H T H F E E U O ø T UF H E F MF TF UF kg , M/P ,9 M/P ,5 M/P , M/P0 H O T U E T UF kg ,5 KQM/55/ , KQM/55/ ,59 KQM/555/ ,7 KQM/556/ Piston rod clevis F Conforms to DIN ISO 80 End cover trunnion H C E CE KK K C CM ø CK h ø TDh9 T UT E KK CE C CM E E K kg CKh M0x, ,09 KQM/55/5 0 Mx, , KQM/55/5 50/6 M6x, ,5 0, KQM/555/5 80/00 M0x, ,67 KQ/8080/5 5 M7 x , KQ/85/5 TDh9 T UT kg ,0 QM/55/8 0 9, ,0 QM/550/ ,05 QM/5550/ ,07 QM/556/8 80 8,5 8 0,09 QM/5580/8 00 0,5 0 0,5 QM/550/ ,5 0 0, QM/555/8 Nose nut N Universal piston rod eye UF Conforms to DIN ISO 89 CN H 7 CE EN -0, E KK E E E KW kg M x, ,0 M/P76 0 M8 x, ,06 M/P77 50/6 M5 x, ,08 M/P78 Thread KK CE CNH7 EN- 0, E E kg M0x,5 0 0,5 5 0,09 KQM/80/ 0 Mx, ,5 7 0, KQM/800/ 50/6 M6x, ,5 5 0, KQM/8050/ 80/00 M0x, , ,67 KQM/8080/ 5 M7x ,5 KQM/85/ en without notice, the specifications given in this document. (998-09d) 05 Norgren GmbH 05/6
7 KM/5500/M, oundline cylinders ear hinge G H C G ø S G G K K H C G G G G S H K K H kg ,5 59, ,5 KQM/550/ , ,6 KQM/5500/ , , KQM/55050/ , ,5 KQM/5506/ , , ,5 5, ,96 KQM/55080/ ,5 5,5 9 7,7 KQM/5500/ , ,5, ,5 75,5 88,5 KQM/555/ Switch mounting bracket QM//xxx/ 5 0 max. max. max. 0 9 QM/// 0 0 QM//0/ QM//50/ QM//6/ 80 5 QM//80/ Magnetically operated switch Switch mounting bracket max QM//00/ 5 0 7,5 QM//5/ 05/6 without notice, the specifications given in this document. (998-09d) 05 Norgren GmbH en
8 KM/5500/M, oundline cylinders Technical data - eed switches - additional informations see data sheet N/en..005 Symbol Voltage Current maximum Function Operating temperature ED Protection class Plug Cable length Cable type Weight (V a.c.) (V d.c.) (m) ( C) (m) (g) ~ + N Closer IP66, 5 or 0 PVC x 0,5 7 M/50/SU/*V Closer IP66 5 PU x 0,5 7 M/50/SU/5U ~ U N U Closer IP66 Silicon x 0,5 7 TM/50/U/S K U N + N ~ Changeover IP66 5 PVC x 0,5 7 M/50/C/5V Closer IP66 M8 x 0, PVC x 0,5 6 M/50/SU/CP *) ~ K * Insert cable length; *) Plug-in connector; Color code: K = black, N = brown, U = blue Drawings M/50/SU/*V, M/50/SU/5U, TM/50/U/S Cable length =, 5 or 0 m - 5, M/50/C/5V Cable length = 5 m 5, ø 6, ø 6,, ,5 M/50/SU/CP - 5, 0 ±5, K ø 6,,5 N U Fixing screw + N = brown; - U = blue (output) - K = black; + N = brown; - U = blue Plug M8 x, color code: K = black; N = brown; U = blue en without notice, the specifications given in this document. (998-09d) 05 Norgren GmbH 05/6
9 KM/5500/M, oundline cylinders Technical data - Solid state - additional informations see data sheet N/en..007 Symbol pnp + N U K Voltage (V d.c.) Current maximum (m) Function Operating temperature ( C) ED Protection class Plug Cable length (m) Cable type Weight (g) PNP IP67, 5 or 0 PVC x 0, 7 M/50/EP/*V PNP IP68 5 PU x 0, 7 M/50/EP/5U pnp npn npn + N U K U + N K + U N K PNP IP67 M8 x 0, PVC x 0, 6 M/50/EP/CP *) PNP IP67 M x 0, PVC x 0, 6 M/50/EP/CC *) NPN IP67, 5 or 0 PVC x 0, 7 M/50/EN/*V Closer IP67 M8 x 0, PVC x 0, 6 M/50/EN/CP *) * Insert cable length; *) Plug-in connector; Color code: K = black, N = brown, U = blue Drawings M/50/EP/*V, M/50/EN/*V Cable length =, 5 or 0 m - 5, + ± ø 6,,5 M/50/EP/CP, M/50/EN/CP - 5, 0 ±5, K ø 6,,5 N U M/50/EP/CC - 5, 7,5 0 ±5 K U ø 6,,5 N ccessories Plug-in connector cable with nut Fixing screw Color code: K = black; N = brown; U = blue Plug M8 x Plug M x Outer cover Cable length (m) Weight (kg) Connector Connector PVC x 0,5 5 m 0,8 M8 x M/P70/5 PU x 0,5 5 m 0,8 M8 x M/P70/5 PU x 0, 5 m 0, M x M/P9/5 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering, Norgren GmbH. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 05/6 without notice, the specifications given in this document. (998-09d) 05 Norgren GmbH en
KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
RM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
RM/8000/M, ISO cylinder Magnetic piston, double acting
> > Ø 0... 5 mm > > Magnetic piston as standard > > Conforming to ISO 6 > > Corrosion resistant- With buffer or adjustable cushioning > > Nose mounting nut and piston rod supplied locknut as standard Technical
PRA/182000/M; PRA/182000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 125 mm
P/8000/M; P/8000 Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, double acting 3... 5 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
RA/8000/M, RA/8000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 320 mm
Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, double acting 3... 30 mm Comprehensive range for the utmost versatility Conforms to ISO 555 (ISO 643, VDM 456 and NFE 49-003-) High performance,
Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
ISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
Piston rod cylinder Tie rod cylinder Series 167. Brochure
Brochure 2 Tie rod cylinder ISO 6431, Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 5 Tie rod cylinder ISO 6431, -53 double-acting
Cylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
Piston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure
ISO 15552, series TRB Brochure 2 ISO 15552, series TRB Tie rod cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
Stainless Steel Cylinders DIN ISO 6431 and VDMA 24 562
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYPE MAGNETIC STANDARD AMX STAINLESS STEEL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Normcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB
Normcylinder Universal application through accomodating on DIN ISO 6431 and VDMA 24562 Part 1. Fastening elements according DIN ISO 6431, VDMA 24562 Part 2. Technical data Tension-rod-cylinder according
DOUBLE ACTING CYLINDERS, Ø 32 to 125 mm
DOUBLE ACTING CYLINDERS, 3 to 15 mm conforming to ISO 6431 - VDMA 456 STANDARDS SERIES 450 - TYPE : PES (with profiled barrel) P30-GB.R8 DOUBLE ACTING PNEUMATIC CYLINDERS - TYPE PES WITH PROFILED BARREL
Rotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
Piston rod cylinders Standard cylinders ISO 15552, series PRA. Brochure
ISO 15552, series PRA Brochure 2 ISO 15552, series PRA Profile cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston Cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
Port size 32 12 G1/8 RA/8032/* RA/8032/M/* QA/8032/00 100 25 G1/2 RA/8100/* RA/8100/M/* QA/8100/00
Actuators ISO/VDMA Cylinders RA/8000/M Ø 32 to 320 mm Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 High performance, ruggedness and reliability Extensive range of mountings Technical data Medium:
Relative and absolute pressure switch type 529
Relative and absolute pressure switch type 529 Pressure range -1... 0 60 bar The compact type 529 pressure switch is based upon the Huba Control developed unique ceramic technology used for the last 20
Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Control- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.
CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension
Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
IMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
FDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Operating Instructions for Plastic Flow Meter. Model: KSK
Operating Instructions for Plastic Flow Meter Model: KSK 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical Connection...
Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
Radial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
Linear actuator Econom 0. Our intelligent model: Econom 0. Econom 0
Linear actuator Econom 0 Our intelligent model: Econom 0 Econom 0 Linear actuators Econom 0 Description Applications Facts The users of the steel or stainless steel Econom 0 come from many different industries:
Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N
S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
Electro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
www.sebury.com.cn Digital Keypad Use s Manual
K3 K4 www.sebury.com.cn Digital Keypad Use s Manual Contents Introduction Introduction Specifications Intramural Interface Circuit 3 Mounting 3 Wiring 5 Power UP 7 Engineer Programming Mode 7 The K3/K4
Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Electronic pressure measurement Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
Duplex Filters 40/160 LD 0003-0045 40/160 LDN 0040-0400. Industrial Filters Accumulators. Filters for inline installation for continuous operation
Industrial Filters Accumulators Duplex Filters 40/160 LD 0003-0045 40/160 LDN 0040-0400 Filters for inline installation for continuous operation With integrated pressure equalisation valve Optimised flow
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
LED...A70..4-..Q Series Sealed High-Intensity
LED...A70..4-..Q Series Sealed High-Intensity Area Lights High-Power Lighting for use with PresencePLUS and Other Vision Systems Features Rugged, waterproof housing, rated IEC IP68 Compact area light for
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Compensation Unit in X-, Y-, and Z-Direction AGE-S-XYZ 100-200
Translation of the original manual Compensation Unit in X-, Y-, and Z-Direction AGE-S-XYZ 100-200 Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains
Hydraulic cylinders Tie rod design. Type CD70 / CG70. Contents. Features. RE 17016 Edition: 2014-03 Replaces: 08.08
Hydraulic cylinders Tie rod design Type CD / CG RE 1 Edition: 2014-03 Replaces: 08.08 Series Component series 1X Nominal pressure bar [7 MPa] Features Contents types of mounting Piston Ø (ØAL)... mm Piston
Incubator with mechanical convection
BF series 400 Incubators and cooling incubators Incubator with mechanical convection The BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications,
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
Solenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot
G1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
WaterMAG. Electromagnetic Flowmeter for Water Applications. Model MCB10A OVERVIEW APPLICATIONS FEATURES. No. SS2-MCB100-0100
WaterMAG Electromagnetic Flowmeter for Water Applications OVERVIEW The WaterMAG is an electromagnetic flowmeter for water measurement applications based on field proven Azbil Corporation's technologies.
Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
Oil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data
amping Engineering Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps, lids, lever arms. They are fixed at
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
Housing diameter Shaft diameter 1. Flange (Mounting of housing) Protection class shaft input (EN 60529) Protection class housing (EN 60529)
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
Electro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
Hydraulic cylinder Mill type. CDL2 type. Contents. Features. RE 17326 Version: 2013-06 Replaces: 12.12. Series L2 Component series 1X
Hydraulic cylinder Mill type CDL2 type RE 17326 Version: 2013-06 Replaces: 12.12 Series L2 Component series 1X 2 pressure ranges: Nominal pressure 160 bar [16 MPa] Nominal pressure 250 bar [25 MPa] Features
Conductive Level Switch FK 2 Technical Data:
Level switch for conductive liquids Optional electrode length adjustment Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by
SITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
TECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
SMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9
CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY
Shut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
Cables. Accessories. For Force, Torque and Strain Sensors
Accessories Cables For Force, Torque and Strain Sensors Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
SITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents
SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould Closing Devices series FSP drive
Supplementary instructions. Connection cable IP 66/IP 68 (1 bar) Retrofitting set/accessory for instruments of the plics family. Document ID: 34107
Supplementary instructions Connection cable IP 66/IP 68 (1 bar) Retrofitting set/accessory for instruments of the plics family Document ID: 4107 Contents Contents 1 For your safety 1.1 Appropriate use...
Standard cylinders DNG/DNGZK/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO 15552 (corresponds
How To Drive A Compact Serie 1
Electric lifting cylinder Compact Series Table of Contents Glossary... 2 Compact serie SR 1... 4 Dimension SR 1... 5 Compact Serie SR 1SP... 6 Dimension SR 1SP... 7 Compact Serie SR 5... 8 Dimension SR
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
Material test chamber with mechanical convection
FP series 400 Material test chambers Material test chamber with mechanical convection A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
Control blocks for two-hand start ZSB
Key features Function This pneumatic control block for twohand start ZSB is used where a manually started operation, such as the triggering of compressed air cylinders, would otherwise involve danger for
Product series DSA, DSB, DSC, DSD
Pressure Switches Product series DSA, DSB, DSC, DSD For oil, fluid grease and grease For use in SKF centralized lubrication systems, hydraulic and compressed-air systems DSA DSB DSC SKF pressure switches
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
Combi switchbox with integrated 3/2 way pilot valve
H Combi switchbox with integrated 3/2 way pilot valve Construction The GEMÜ combi switchbox with integrated 3/2 way pilot valve for pneumatically operated quarter turn actuators has a micro-processor controlled
HG600/HG800. Hydro-Power Unit. Installation and Operation Guide
HG600/HG800 Hydro-Power Unit Installation and Operation Guide Copyright 04 HydroSpin, All rights reserved. The data contained in this document is proprietary to HydroSpin. It is disclosed to the receiving