High-Purity. Ball Valves
|
|
|
- Bruce French
- 7 years ago
- Views:
Transcription
1 High-Purity s COMPONENTS MANUFACTURING ASSEMBLY TESTING
2 HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free Air (OFA), General Nitrogen (GN2), Utility Nitrogen (UN2), and other inert gas applications. Product Description Size Range: Tube: 1/4" o.d. to 6" o.d. JIS Pipe: 15A to 250A NPS Pipe: NPS 1/2 to NPS 14 Temperature Range: -20 F to 350 F (-29 C to 177 C) Stainless steel construction Wide variety of end connections available Features & Benefits High flow full-port design Available in various integrated tee valve assemblies using Valex tube and tube fittings High cycle-life performance Floating ball for positive shut-off 3-Piece construction for ease of maintenance Color-coded handle options Locking handle for lock-out/tag-out applications Each valve includes a Certificate-of-Compliance to Valex specification SP % Helium leak tested Nitrogen-purged and double polyethylene bagged Cleaned for Oxygen Service (CFOS) ISO Class 5 cleanroom assembled, tested & packaged PED Certification available
3 HP Flow Coefficient ASTM Tube Sizes Valve Size Ball Orifice Cv 1 1/4" x.035" 0.402" " x.035" 0.402" 9.0 1/2" x.049" 0.402" /4" x.065" 0.620" " x.065" 0.870" /2" x.065" 1.370" 223 2" x.056" 1.870" /2" x.065" 2.370" 713 3" x.065" 2.870" 1,069 4" x.083" 3.834" 1,971 6" x.109" 5.782" 4,688 NPS Pipe Sizes (Schedule 10) Valve Size Ball Orifice Cv 1 NPS 1/ " 37.0 NPS 3/ " 68.5 NPS " 110 NPS 1-1/ " 186 NPS 1-1/ " 269 NPS " 481 NPS 2-1/ " 839 NPS " 1,301 NPS " 2,085 NPS " 3,338 NPS " 4,902 NPS " 8,980 NPS " 14,354 NPS " 21,048 NPS " 26,864 JIS Pipe Sizes (Schedule 10) Valve Size Ball Orifice Cv 1 JIS 15A 0.591" 37.0 JIS 20A 0.787" 68.5 JIS 25A 0.984" 110 JIS 32A 1.260" 186 JIS 40A 1.496" 269 JIS 50A 1.969" 481 JIS 65A 2.559" 839 JIS 80A 3.150" 1,301 JIS 100A 3.937" 2,085 JIS 125A 4.921" 3,338 JIS 150A 5.906" 4,902 JIS 200A 7.874" 8,980 JIS 250A 9.843" 14, Flow coefficient data calculated using methods described in Crane Technical Paper TP-410. Pressure (PSIG) /4" 1" Tube 1.5" 2" Tube 2.5" 4" Tube 6" Tube Pressure Temperature Rating Temperature ( C) Temperature ( F) ASTM Tube Sizes NPS Pipe Sizes (Sch 10) JIS Pipe Sizes (Sch 10) NPS 1/2 NPS 1-1/2 NPS 2 NPS 3 NPS 4 NPS 5 NPS 6 NPS 10 NPS 12 NPS A 40A 50A 80A 100A 125A 150A 250A 300A 350A Pressure (BARG)
4 HP ASTM Tube Sizes Dimensions Below in Inches Size A1 A2 A3 B C D E 1/4" 4.50" 4.09" 3.68" 2.25" 1.84" 2.16" 4.40" 3/8" 4.50" 4.18" 3.82" 2.25" 1.91" 2.16" 4.40" Tube x Tube Pipe x Pipe E D 1/2" 5.00" 4.56" 4.13" 2.50" 2.06" 2.16" 4.40" 3/4" 5.25" 5.01" 4.77" 2.63" 2.39" 2.32" 5.11" 1" 5.50" 5.77" 6.04" 2.75" 3.02" 2.92" 5.65" 1-1/2" 7.00" 7.80" 8.59" 3.50" 4.30" 3.76" 7.72" 2" 8.00" 9.54" 11.08" 4.00" 5.54" 4.12" 7.72" 2-1/2" 9.50" 4.75" 5.68" 12.08" 3" 10.80" 5.40" 6.03" 12.08" 4" 12.35" 6.18" 7.04" 15.52" 6" 17.00" 8.50" 10.6" 18" - 36" B A1 NPS Pipe Sizes (Schedule 10) Dimensions Below in Millimeters Size A1 B D E Tube x Compression E B A2 Compression x Compression E C A3 D D NPS 1/ NPS 3/ NPS NPS 1-1/ NPS 1-1/ NPS NPS 2-1/ NPS NPS NPS NPS NPS NPS NPS JIS Pipe Sizes (Schedule 10) Dimensions Below in Millimeters Size A1 B D E JIS 15A JIS 20A JIS 25A JIS 32A JIS 40A JIS 50A JIS 65A JIS 80A JIS 100A JIS 125A JIS 150A JIS 200A JIS 250A JIS 300A N/A Gear Operator N/A Gear Operator Dimensions are approximate, subject to change, and may vary from valve to valve. Please check the Valex website for latest dimensions.
5 Materials of Construction HP Item Qty Part Material A 2 SPRING WASHERS 300 SERIES SS B 1 BODY CF8M SS C 1 NUT STOP 304 SS D 1 HANDLE NUT 300 SERIES SS E 1 STEM NUT 300 SERIES SS F 1 HANDLE 300 SERIES SS G 1 HANDLE COVER VINYL POLYMER H 2 GLAND WASHERS 300 SERIES SS I 1 STEM PACKING PTFE J 1 THRUST WASHER PTFE K 1 STEM 316 SS L 2 SEAT PTFE/RPTFE M 2 BODY GASKET PTFE N 4 END CAP FLANGE 300 SERIES SS HARDWARE O 2 END CAP FLANGE CF3M SS P 1 BALL 316L/CF3M SS SS = Stainless Steel C D E F G A B O P H I J K L M N Rebuild Kits Complete PTFE/RPTFE seal and hardware kits are available to service all Valex high-purity valves. Rebuild kits include new stem packing seals, body gasket seals, thrust washer, and ball seats. Also included, is a full stainless steel hardware kit to keep your high-purity valve operating like new.
6 HP Custom Spools & Manifold Assemblies Valex can build specialty CFOS valve assemblies that reduce field welds and installation time. From integrated tee valve sub-assemblies, all the way to 24-foot long CFOS manifolds, each assembly is custom built out of Valex tube, pipe, fittings and valves. Our mission of providing products and services that meet or exceed our customers expectations. Valex is your one trusted source for all of your CFOS needs. Contact your local Valex representative for more details. Handles Standard locking lever: Tube 1/4" 4" JIS 15A 100A NPS 1/2 NPS 4 Tee style bar handle: Tube 6" JIS 125A NPS 5 Gearbox actuation: JIS 150A 250A NPS 6 NPS 14 Handle Color Options Blue handles come standard, or choose from nine different color-coded handles for easy process line identification. Colors include: blue, red, pink, white, yellow, green, black, purple, silver, and gold.
7 COMPONENTS MANUFACTURING ASSEMBLY TESTING HP Standard Configurations Straight Valve Single Horizontal Cross Double Horizontal Cross Double Single Sided Double Vertical Tee Double Horizontal Tee COMPONENTS MANUFACTURING ASSEMBLY TESTING Benefit From World Leadership We are your trusted source for high-purity ball valves, PCW ball valves, instrumentation ball valves, headers, manifolds, pipe, tube, fittings and more. For more information, please visit our website or contact your Valex representative. Benefit from world leadership, and benefit from Valex quality. Manifolds Mini Process Cooling Water PCW s
8 Ordering Information S S H C L 1 6 P X S M B Valex Corporate Offices & Manufacturing 6080 Leland Street Ventura, CA Phone: Hansan-Gil Chungbuk-Myon Pyongtaek-City Kyonggi-Province, Korea Phone: No. 559 Yuanzhong Road Nanhui Industrial Zone Pudong New District Shanghai, China Phone: S Material S = Stainless Steel S H C Assembly Pattern STR = Straight DHC = Double Horizontal Cross SHC = Single Horizontal Cross DSS = Double Single Sided DVT = Double Vertical Tee DHT = Double Horizontal Tee Main Line Size 04 = 1/4" o.d. x.035" Wall 15 = DN15 (NPS 1/2 / JIS 15A) 06 = 3/8" o.d. x.035" Wall 20 = DN20 (NPS 3/4 / JIS 20A) 08 = 1/2" o.d. x.049" Wall 25 = DN25 (NPS 1 / JIS 25A) 12 = 3/4" o.d. x.065" Wall 32 = DN32 (NPS 1-1/4 / JIS 32A) 16 = 1" o.d. x.065" Wall 40 = DN40 (NPS 1-1/2 / JIS 40A) 24 = 1-1/2" o.d. x.065" Wall 50 = DN50 (NPS 2 / JIS 50A) 32 = 2" o.d. x.065" Wall 65 = DN65 (NPS 2-1/2 / JIS 65A) 40 = 2-1/2" o.d. x.065" Wall 80 = DN80 (NPS 3 / JIS 80A) 48 = 3" o.d. x.065" Wall 64 = 4" o.d. x.083" Wall 96 = 6" o.d. x.109" Wall 100 = DN100 (NPS 4 / JIS 100A) 150 = DN150 (NPS 6 / JIS 150A) 200 = DN200 (NPS 8 / JIS 200A) 250 = DN250 (NPS 10 / JIS 250A) 300 = DN300 (NPS 12 / JIS 300A) 350 = DN350 (NPS 14 / JIS 350A) L Main Line End Connection A = JIS (Sch 5) Pipe Buttweld Inlet/Outlet B = Tube Buttweld Inlet, Tube Buttweld Outlet w/ Welded Cap C = Compression Fitting Inlet & Outlet D = JIS (Sch 10) Pipe Buttweld Inlet/Outlet E = Tube Buttweld Inlet, FNPT Outlet F = Face-seal Fixed Male Inlet & Outlet G = Tube Buttweld Inlet, Face-seal Fixed Male Outlet H = Compression Fitting Inlet, Tube Buttweld Outlet J = Tube Buttweld Inlet, Compression Fitting Outlet K = Face-seal Fixed Male Inlet, Tube Buttweld Outlet L = NPS (Sch 10) Pipe Buttweld Inlet/Outlet M = Tube Buttweld Inlet & Outlet N = Tube Buttweld Inlet, B16.5 Class 150 Flange Outlet P = B16.5 Class 150 Flange Inlet & Outlet Q = Compression Fitting w/ Plug Inlet, Tube Buttweld Outlet R = Tube Buttweld Inlet, Compression Fitting w/ Plug Outlet 1 6 Branch Valve(s) Outlet Size 04 = 1/4" o.d. x.035" Wall XX = No Branch Valve(s) 06 = 3/8" o.d. x.035" Wall 15 = DN15 (NPS 1/2 / JIS 15A) 08 = 1/2" o.d. x.049" Wall 20 = DN20 (NPS 3/4 / JIS 20A) 12 = 3/4" o.d. x.065" Wall 25 = DN25 (NPS 1 / JIS 25A) 16 = 1" o.d. x.065" Wall 32 = DN32 (NPS 1-1/4 / JIS 32A) 24 = 1-1/2" o.d. x.065" Wall 40 = DN40 (NPS 1-1/2 / JIS 40A) 32 = 2" o.d. x.065" Wall 50 = DN50 (NPS 2 / JIS 50A) 40 = 2-1/2" o.d. x.065" Wall 65 = DN65 (NPS 2-1/2 / JIS 65A) 48 = 3" o.d. x.065" Wall 80 = DN80 (NPS 3 / JIS 80A) 64 = 4" o.d. x.083" Wall 100 = DN100 (NPS 4 / JIS 100A) 96 = 6" o.d. x.109" Wall 150 = DN150 (NPS 6 / JIS 150A) P Connection On Branch Valve(s) X = No Branch Valve(s) A = JIS (Sch 5) Pipe Buttweld B = Tube Buttweld w/ Welded Cap C = Compression Fitting D = NPS (Sch 10) w/ B16.5 Class 150 Flange E = Female NPT National Pipe Thread F = Face-seal Fixed Male L = NPS (Sch 10) Pipe Buttweld M = Tube Buttweld P = Compression Fitting w/ Plug X Inlet Purge Port X = No Purge Port C = Compression Fitting D = Purge Drill (Open to Atmosphere) P = Compression Fitting w/ Plug S = Face-Seal (Swivel Male Nut w/ Cap) T = Purge Tube (Open to Atmosphere) U = Face-Seal (Swivel Female Nut w/ Plug) V = Purge Valve w/ Compression Fitting S Outlet Purge Port X = No Purge Port C = Compression Fitting D = Purge Drill (Open to Atmosphere) P = Compression Fitting w/ Plug S = Face-Seal (Swivel Male Nut w/ Cap) T = Purge Tube (Open to Atmosphere) U = Face-Seal (Swivel Female Nut w/ Plug) V = Purge Valve w/ Compression Fitting M Section 9.0 Identifier E = 10 Ra Electropolished M = Standard Finish Option (per SP-9217) B Handle Sleeve Color 0 = N/A P = Purple B = Blue R = Red D = Gold S = Silver G = Green W = White I = Pink Y = Yellow K = Black Not all possible part number combinations are available. Please contact Valex for availability. Neither ozone-depleting nor mercury-bearing compounds are used during Valex processing or testing of any product. C1412
ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267
BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
Ball Valves (HB Series) Catalog 4121-HB Revised, April 2005
Ball Valves (HB Series) Revised, April 2005 Introduction Parker High Pressure HB4 Series Ball Valves provide reliable shut-off or switching functions. The upper and lower trunnion bearings enhance the
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Proportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to psig (0.7 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves Spring
TY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
Copper Meter Resetters
Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710
Pipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
AUTOMATIC CHANGEOVER MANIFOLD Series 915
AUTOMATIC CHANGEOVER MANIFOLD Series 915 FEATURES Fully automatic, simple, hassle-free operation No variance in delivery pressure Designed for ultra high purity gas service Built-in audio and visual alarm
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Types 66R and 66RR Low-Pressure Relief Valves
November 2009 Types 66R and 66RR Low-Pressure Relief Valves W1953 W1908 TYPE 66R RELIEF VALVE TYPE 66RR RELIEF VALVE Figure 1. Typical Constructions Introduction Types 66R and 66RR low-pressure throttling
Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
Multipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
TYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
Cajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
Compact, High-Flow Gas Regulators
www.swagelok.com Compact, High-Flow Gas Regulators HF Series Precise pressure control Tamper-free design High-purity design Preset and adjustable dome-loaded models 2 Compact, High-Flow Gas Regulators
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
Complete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
Baumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
Shut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Block and Bleed Gauge Valves M25 and M251
Product Overview The M25 and M251 are two-valve single outlet gauge valves that combine isolating, calibrating, and venting facilities in a single compact unit. These valves enable gauges, pressure transmitters,
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
1805 Series Relief Valves
October 2011 1805 Series Relief Valves P1026 1805G Type 1805-2 Type 1805-4 Figure 1. Typical 1805 Relief Valves Introduction The 1805 Series relief valves are designed for use in farm tap applications
AIR LINE VALVES AND GAUGES
AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand
Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS
MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
Installation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Baumann 24000SB Barstock Control Valve
Instruction Manual 24000SB Valve Baumann 24000SB Barstock Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 3 Installation... 3 Air Piping... 4 Disassembly...
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
VAD. Variable Area Desuperheaters
Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
valve solutions Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper www.quilinox.
valve solutions www.quilinox.com Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper valvulas esfera PBM.pdf (1753) 2015/01 1/10 D E SIGN F E A
MFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
Copper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Float and Thermostatic Traps Series H, C and X
Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves Features Top guided design offers high capacity with 0.110 in 2 [0.710 cm 2 ] orifice area.
Watts Pure Water Systems
Watts Pure Water Systems WM-120-PT Installation and Operation Manual Premier Water Systems Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before
60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
SIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
SERVICE PARTS LIST AND ASSEMBLY INSTRUCTIONS
T-352PL Manual SERVICE PARTS LIST AND ASSEMBLY INSTRUCTIONS for FlexCLIK Hose & Fittings T-352PL REV. 11/2012 2012 Mobile Climate Control TABLE OF CONTENTS 1 INTRODUCTION... ii 2 ORDERING INSTRUCTIONS...
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
KF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
Engineering Specifications
PUREFLOW PEX PRODUCTS PART 1 GENERAL 1.1 SUMMARY 1.1.1 This specification covers Branch & Main, Parallel Water Distribution Systems (MANABLOC), Cross-linked Polyethylene tubing and fittings using PEX Press
Full Technical Catalog For Closed-loop Sampling System
Full Technical Catalog For Closed-loop Sampling System Full Technical Catalog For Closed-loop Sampling System FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany
High Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
Type 92S Pilot-Operated Steam Regulator
Type 92S Pilot-Operated Steam Regulator Introduction The Type 92S steam regulator is piston actuated for high cycle steam service which includes a Type 6492L, 6492H or pilot (see Figure 1). These pilots
PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM
PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM PRESSURE REDUCER AND RELIEF VALVES These devices are used to reduce and control a gaseous flow pressure (air, steam, gas ). The PRESSURE
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
Type EZL Pressure Reducing Regulator for Low Differential Pressure Applications
Type EZL Pressure Reducing Regulator for Low Differential Pressure Applications May 2016 W8962 Figure 1. Type EZL Pressure Reducing Regulator Features Main Diaphragm The main diaphragm is Nitrile (NBR)
KEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing
KEYSTONE Stainless steel hygienic butterfly valves F0 for imperial tubing F for metric tubing Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
Product Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description
Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR
Submersion/Insertion Toroidal Sensor
Instruction Sheet PN 51A-228/rev.P December 2010 Model 228 Submersion/Insertion Toroidal Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION SENSOR/PROCESS
needle valves Needle Valves Index At a Glance 1
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
HM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control
HM Series - DBB Single, Double Block & Bleed Valves INDEX / USER RESPONSIBILITY Index Technical Specifications... 3 How To Order / Optional Extras... 5, 9, 12, 14 Hand Valves... 4 Gauge Valves... 6 Model
Replacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS
Replacement parts DO NOT SERVICE THE BOILER WITHOUT A WM97+ MAINTENANCE KIT AVAILABLE Failure to adhere to these guidelines can result in severe personal injury, death or substantial property damage. The
FUEL SYSTEMS OUR PARTS PUT YOU IN THE PASSING LANE. Protect your fuel system. velvac.com
OUR PARTS PUT YOU IN THE PASSING LANE FUEL SYSTEMS Protect your fuel system. Velvac offers a wide range of locking fuel caps and anti-siphon tubes to keep unlawful occurances at bay. With OEM approved
Baumann 81000 Mikroseal Control Valve
Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
Transport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
SPERRYN GAS CONTROLS DELTA FLUID PRODUCTS LIMITED
SPERRYN GAS CONTROLS DELTA FLUID PRODUCTS LIMITED Domestic and Non-Domestic Meter Regulators G940/G941 - Domestic Meter Regulator Domestic regulator offering high performance in a compact unit. Sizes:
PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263
Many Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
Model 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve
High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its
Severe-Ser vice Union-Bonnet Needle Valves
www.swagelok.com Severe-Ser vice Union-onnet Needle Valves N Series and N Series Working pressures up to 10 000 psig (689 bar) Temperatures from 65 to 450 F ( 53 to 232 C) with PTFE packing; up to 1200
Powers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat
Document No. 155-068P25 TH 193-4 Powers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 193 HC thermostats are proportional dual
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
HT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
289 Series Spring-Loaded Relief Valves
October 14 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L and 89U Relief Valves Introduction The
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
Your safety and the safety of others are very important.
NATURAL GAS TO PROPANE CONVERSION KIT 090 INSTALLATION INSTRUCTIONS FOR ALTITUDES 0 -,00 FT. ONLY PROPANE CONVERSION KIT SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... LP Gas Requirements...
COPPER METER SETTERS 6-08. A.Y. McDONALD MFG. CO. WATER SERVICE PRODUCTS. TO SET 5/8", 5/8" X 3/4", 3/4", 1", 1 1/2", and 2" Water Meters
COPPER METER SETTERS TO SET 5/8", 5/8" X 3/4", 3/4", 1", 1 1/2", and 2" Water Meters A.Y. McDONALD MFG. CO. WATER SERVICE PRODUCTS 608 A.Y. M c Donald Mfg. Co. is pleased to present its extensive line
1-800-654-3872 1-405-273-6302
Anodeless Risers Transition Risers Compression Risers Riser Accessories Transition Risers and Transitions The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com Risers and Transitions:
Regulator Options and Accessories
Regulator Options and Accessories Regulator accessories are available separately or mounted on Swagelok regulators. Some accessories limit regulator pressure or temperature ratings. Additional materials,
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
PVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
RMF Engineering 23 05 23
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
Powers Controls TH 192 S Single Temperature Room Thermostat
Technical Instructions Document No. 155-065P25 TH 192-1 Powers Controls TH 192 S Single Temperature Room Thermostat 50 60 70 80 TH0355R1 70 80 POWERS Description The TH 192 S thermostats are proportional
2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications
Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?
Meter Units. Inch and Metric Threads. General. Application. How to Order 35470 R2 09/12
Meter Units Inch and Metric Threads General Meter units are oil proportioning devices for cyclic systems. Each outlet of a lubricating system is controlled by a meter unit. The lubricator in the system
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
MODEL 201 225LP 225LP2 225LP4 Safety Relief Valves
Edition GDRV.06 BRYAN DONKIN RMG CANADA LIMITED Serving the Gas Industry WORLDWIDE Applications Specifically designed to protect the downstream system or equipment from over pressure conditions by discharging