Finnish Competence Network for WIND POWER TECHNOLOGY

Transcription

1 Finnish Competence Network for WIND POWER TECHNOLOGY

2 Contents Introduction... 1 Index... 3 Structures, foundation... 4 Wind turbine, rotor... 6 Gearbox, Generators... 8 Control devices Engineering and Design Others Editors: Design and layout: Cover images: Inner page images: Tanja Suominen / Prizztech Oy Megumi Asano-Ulmonen / Prizztech Oy Anne Autioniemi / Prizztech Oy Eero Länsimäki, Marko Mikkola / Prizztech Oy, TuuliWatti Oy TuuliWatti Oy Eero Länsimäki Marko Mikkola / Prizztech Oy Merinova Oy

3 Partners: PRIZZTECH Tanja Suominen Project Manager Renewable Energy Technologies Anna-Kaisa Karppinen Project Engineer Hannu Mars Managing Director Eeli Mykkänen Project Manager Energy and Environmental Technology Petri Nieminen Programme Director Sentre - Sustainable Energy Solutions petri.nieminen@hermia.fi Introduction This publication is the fourth part of Finnish Competence Network series on Renewable Energy Technologies which will be completed in the beginning of the year The series consists of eight publications and will cover most of the renewable energy fi eld. They will get you familiarized with the Finnish competence and expertise on renewable energy technology on different branches. The publication series is a part of the Renewable energy technology companies networks and supply chains project. Project is a co-operational project to Finnish Energy Cluster program and it is mainly funded from European Regional Development Funds (ERDF). Project aims to increase the renewable energy share on the energy technology export business and answer the growing demand of renewable energy technology due to increased renewable energy use, as stated in the EU climate program. The markets are growing worldwide, not only within Europe. According to recent report of The Research Institute of the Finnish Economy, the Finnish energy technology export grows fast. During the year 2008 the energy technology export reached the value of 5 billion Euros, which is 7.6 % of all Finnish export. This means that is one of the most specialized energy technology supplier in the world. Numbers include all energy forms, but not for example component delivery, so the actual values are even larger. It was also pointed out in the same report, that there are still growing sectors in the renewable energy technology markets. An extensive survey was sent nationwide to the renewable energy technology suppliers. Questions covered the whole value chains for each branch of energy sources, companies current status and future prospects, willingness for networking and to extend their business plus many other things. These results will be reported in detail in due course. The companies who expressed their interest on participating The Competence Network series are introduced in this publication. This presentation gives an overview of Finnish competence in the Wind Power technologies. The brochure also provides quick and easy reference across the disciplines to reach the right contacts required for further information. Tuomas Rouhunkoski Head of the Unit tuomas.rouhunkoski@uwasa.fi January 2010 Tanja Suominen Project Manager Prizztech Oy 1

4 2

5 Index Categories Primary area of competence Other areas of competence Structures, foundation Wind turbine, rotor Gearbox, Generators Control devices Engineering and Design page Others 10 a-lab Oy 14 AIRIX Industry Ltd 11 CLS-Engineering Oy 17 Componenta Oyj Castings for wind turbines and gearboxes 18 Cupori Group Oy Copper tubes for applications with good electrical conductivity e.g. coaxial cables 6 Efore Plc 15 FCG Finnish Consulting Group Research and development 18 Greenstream Financing and consulting 4 Hollming Works Oy 7 Hydroll Oy 15 KPM-Engineering Oy Research and development 8 Moventas Oy Research and development 19 MSc electronics Oy Grid-tie converters for small wind energy 19 Numerola Oy Simulation driven design services, Research and development 7 OMP-Konepaja Oy 11 OS Automation Oy Research and development 5 Peikko Group Oy 20 Pemamek Ltd Production automation for windmill tower manufacturing 20 PowerQ Oy Monitoring and control 21 Oy Primo Ab Plastic extrusion, Pultrusion 21 Process Flow Ltd Modeling and simulation 16 Ramboll Oy 22 Oy Rikta Ab Wire harness and cable 12 Sabik Oy Ab Navigation aids and marking of offshore wind mill parks 13 Satmatic Oy 9 The Switch Converters 5 Technip Offshore 12 Vacon Group 13 Vamp Ltd Protection systems, arc flash protection 22 VNT Management Oy Financing 23 YRJtechnology Site analysis, evaluation 3

6 STRUCTURES, FOUNDATION Hollming Works Oy Hollming Works P.O. Box Pori M EUR Jorma Koskenmäki Director, new business development jorma.koskenmaki@ hollmingworks.com Hollming Works is one of the most signifi cant conglomerations of engineering works in and an essential part of the supply chain of its international customers. As a reliable contract manufacturer of mechanical engineering products, our operation is based on customer-orientation and competitiveness. Operation is in four locations: Kankaanpää, Loviisa, Parkano and Pori. Assembly (nacell, hub, generator, gearsbox, lubricant unit ) Manufacturing of steel structures (suction anchor, platform, pedestal, tower, frames ) Machining of steel and cast iron components (generator and gear housing, hub, frames, shaft, slewing ring ) Turbine maintenance Mechanical engineering 3 MW Nacelles for WinWinD during MW Generators for The Switch during Generator frames for ABB during STRUCTURES, FOUNDATION 4

7 Peikko Group Oy Subsidiaries abroad Peikko Group Oy P.O. Box 104 Voimakatu Lahti over 700 over 100 M EUR Production in FIN, DE, SK, LT, UK and United Arab Emirates Sales and logistics in 20 countries Markku Koponen Sales Director markku.koponen@peikko.com Peikko has developed a standardized anchoring system for wind turbine tower foundations which consists of a complete solution with anchoring ring, pre-tensioned anchor bolts, top ring, optional high quality welded adapter ring and mounting templates. Peikko offers a secure and proven solution for wind turbine tower fastening according to today s standards and fulfi lls the challenging requirements of delivery times, quality and cost to our customers. The key element in the Peikko foundation system consists of a pretension bolted ring design. This ring structure effi ciently transfers the dynamic loads in the wind tower to the reinforced concrete foundation and thus provides a very secure and stable fastening solution in the concrete foundation with a very long life span. Standardized anchoring system for wind turbine tower foundations. Brunsmo wind mill park, Sweden Råbelöf wind mill park, Sweden Uljabuouda wind mill park STRUCTURES, FOUNDATION Technip Offshore Oy Reposaaren maantie 170 Mäntyluoto Pori M EUR Technip Offshore Technip Offshore s main products cover hulls for oil and gas production platforms (SPARs, TLP-platforms, fl oaters), subsea structures and equipment as well as large and heavy critical components for industry. In the renewable energy sector the main fi eld of activity is the foundations for the wind mills on a EPCI basis (Engineering, Procurement, Construction, Installation). Delivery of wind mill foundations (foundations, monopiles, transition pieces) on an EPCI basis. Vesa Vuorenpää Sales Manager vvuorenpaa@technip.com Delivery of Hywind substructure to Norway, summer 2009 Hywind is the world s 1st fl oating offshore wind mill. Client StatoilHydro Delivery of offshore wind mill foundation for Suomen Hyötytuuli Oy, delivery summer 2010 STRUCTURES, FOUNDATION 5

8 WIND TURBINE, ROTOR Subsidiaries abroad Efore Plc P.O. Box Espoo M EUR 4 Efore Plc Efore supplies DC power systems for telecom networks and industrial applications. Our Systems business has over thirty years of experience in designing, manufacturing and marketing power supply systems for DC applications. In addition to DC-systems Efore is building integrated Site Solutions using alternative energy together with industry leading partners. 30 years experience in Power Electronics Efore site solutions provide integrated, managed, and scalable solutions using alternative energy sources such as PV, Wind Turbines and Fuel Cells. Sirpa Hyvönen Marketing Specialist sirpa.hyvonen@efore.fi Technical University of Helsinki WIND TURBINE, ROTOR 6

9 OMP-Konepaja Oy OMP-Konepaja Oy Tuoreenmaanarontie Oulu M EUR Vesa Korkiakoski Development manager vesa.korkiakoski@ omp-konepaja.fi Steel structures, Installation, maintenance, welding works, machining welding works Putkimaa Oy Foster Wheeler Oy Winwind Oy PVO-Pohjolan Voima Oy WIND TURBINE, ROTOR Hydroll Oy Lohkarekuja LAPUA M EUR Pertti Vilenius Managing Director pertti.vilenius@hydroll.com Hydroll Oy Hydroll Oy manufactures and markets piston accumulators. In its short history the company has become well known for being the manufacturer of the long lasting HPS range of accumulators. The products have been manufactured to specifi cally withstand the requirements of heavy duty installations operating within diffi cult Nordic conditions. Designing and manufacturing of hydraulic piston accumulators Within the Wind Energy sector: Siemens Wind Power 2.3 MW turbines Acciona Wind Power 1.5 MW turbines Mitsubishi Heavy Industries 1.5 MW turbines WIND TURBINE, ROTOR 7

10 GEARBOX, GENERATORS COMPONENTS, SUBPRODUCTS Moventas Oy Subsidiaries abroad Moventas Oy Piippukatu Jyväskylä over M EUR Brazil, Canada, Chile, China, Germany, Singapore, Sweden, USA Antti Mäntylä Communications planner antti.mantyla@moventas.com Moventas is one of the largest manufacturers of wind turbine gears in the world. The company also manufactures power transmission solutions for industry use and provides services for their overhaul and maintenance. Majority of the products end use is connected with renewable energy. In 2008 Moventas generated net sales of EUR 382 million. The company has over 1300 employees in 8 countries globally with a world-wide partner network. European private equity investor IK Investment Partners holds the majority of the shares in Moventas. Wind turbine gears Industrial gears Service Vestas Acciona GE Metso GEARBOX, GENERATORS 8

11 The Switch Subsidiaries abroad The Switch Äyritie 8 C Vantaa M EUR Beijing and Lu an, CN, Hudson, NH, USA. Hamburg, DE Jussi Vanhanen Marketing Manager jussi.vanhanen@theswitch.com The Switch is a leading supplier of megawatt-class permanent magnet generator and full-power converter packages for wind power and other New Energy applications. With innovative people and cutting edge technology, we capture the power from the wind and transform it into maximized energy fl ow. Our solutions help to combat climate change and conserve energy resources. The Switch Drive TM, our fully optimized generator and converter package, is the soul of every reliable wind turbine. With patented magnet shapes and arrangements, our generators always run smoothly at maximum effi ciency, and provide excellent availability and productivity. The rugged design of our full-power converters provides greater fault tolerance and grid support through FRT functionality. Our converters easily adapt to changing operational conditions and ensure stable and high-quality electricity. ScanWind, Norway; Goldwind, China; PowerWind, Germany GEARBOX, GENERATORS COMPONENTS, SUBPRODUCTS 9

12 CONTROL DEVICES a-lab Oy a-lab Ltd Loilonkuja Keuruu Antti Ruokolainen antti.ruokolainen@a-lab.fi a-lab supplies wireless, low power sensory systems and internet based control/reporting, such as the following: Environment monitoring products for weather, water and soil. Food chain monitoring systems starting from agriculture fi eld monitoring applications to food industry monitoring. Nonfood industry remote measurement and monitoring systems and related data services. Measurement systems based on low power wireless technology. Virtual, customized, internet based control rooms. Neste Oyj, gas tank remote monitoring and logistics management system. Fazer Oyj, food factory remote monitoring SYKE, country wide wireless environment monitoring system CONTROL DEVICES 10

13 CLS-Engineering Oy CLS-Engineering Oy Hakunintie Rauma M EUR Tom Holmström Sales Manager tom.holmstrom@ cls-engineering.fi CLS-Engineering Oy is a project supplier specialized in automation and electrifi cation. We deliver automation and electrifi cation services such as consulting, designing, manufacturing and installations to a wide range of industries. Our capabilities allow us to meet the most demanding requirements of our customers at home and abroad. CLS-Engineering Oy has the ISO9001:2000 standards certifi cation from Det Norske Veritas. CLS-Engineering has been working since the beginning of company history in the Energy Industry, in particular, the nuclear power industry. This has given us the know-how that we now use also in the bio-energy industry, with several turn-key deliveries during the last years. Given upon request CONTROL DEVICES OS Automation Oy P.O.Box Varkaus M EUR Jukka Koskinen Managing Director fi rstname.lastname@ osautomation.fi OS Automation Oy Our success lies in our ability to build automation system architectures that take advantage of both automation hardware and software technologies at their best. Automation solutions and applications are designed just for customers needs. In fact, taking advantages of both hard- and software technologies is essential when developing a fully integrated and cost-effective solution. OS Automation Oy is a partner of many global companies. Automation is an essential part of their product. OS Automation Oy is an engineering company who supplies automation in Boxes, based on Box It -product concept. Hardware design engineering for hundreds of projects Automation of boilers and gasifi ers Burner automation CONTROL DEVICES 11

14 Subsidiaries abroad Oy Sabik Ab Merituulentie Porvoo M EUR in Germany Mr. Lars Mansner Marketing director Lars.mansner.@sabik.com Sabik Oy Ab Sabik Oy Ab provides aids to navigation, solar power systems, LED lights for special purposes, off shore oil & gas industry needs for navigation aids, off shore wind farms navigation aids LED technology, low energy consumption, marine environment, arctic environment Europe no.1 supplier of aids to navigation Scandinavian countries US coast guard Canadian coast guard CONTROL DEVICES Subsidiaries abroad Vacon Group Runsorintie Vaasa M EUR 27 Sebastian Linko Director, Corporate Communications sebastian.linko@vacon.com Vacon Group Vacon s operations are driven by a passion to develop, manufacture and sell the best AC drives in the world and nothing else. AC drives are used to control electric motors and in renewable energy generation. Vacon has R&D and production units in, the USA, China and Italy, and sales offi ces in more than 25 countries. In 2008 Vacon had revenues of EUR million and globally employed 1200 people. The shares of Vacon Plc (VAC1V) are quoted on the main list of the Helsinki stock exchange. Vacon puts 100% effort on the AC drive business. Focusing on a single business gives major customer benefi ts, which are demonstrated as expertise in R&D, sales and service operations. The Switch Converteam CONTROL DEVICES 12

15 Vamp Ltd Vamp Ltd P.O. Box 810 Yrittäjänkatu Vaasa M EUR Pekka Hämäläinen Marketing manager sales@vamp.fi Vamp Ltd is a globally recognized supplier of protection relays, arc-fl ash protection systems, and measuring and monitoring units. Vamp medium voltage and subtransmission relays are used in a number of applications in electric utilities, power generation companies and in industrial power systems worldwide. Vamp is the global leader in arc-fl ash protection systems, with thousands of installations. Fast and selective protection can easily and cost-effi ciently be set up using an appropriate combination of Vamp arc-fl ash protection products. Arc fl ash protection system, low and medium voltage protection relays, power quality monitoring and measuring units, expert services (consultation) Wärtsilä, Fortum, Vattenfall, Fingrid, Stora Enso, UPM, DuPont CONTROL DEVICES Satmatic Oy Sammontie Ulvila M EUR Satmatic Oy Satmatic Oy is one of the leading manufacturers of electrical and automation technology in. Satmatic is specialised in electrifi cation and automation manufacturing. We develop, manufacture, and market automation control system cabinets, drive cabinets, and switch gears. We offer the whole package from planning to installation and maintenance. Rainer Nurkkala Sales Manager rainer.nurkkala@satmatic.fi CONTROL DEVICES 13

16 ENGINEERING AND DESIGN AIRIX Industry Ltd AIRIX Industry provides Power Plant design and Consultant services. AIRIX Industry Ltd Salhojankatu Tampere Ari Nieminen Sales Director Pre Engineering Energy Studies EPCM Services Process design E&I design Plant design Equipment design HVAC design Technical calculations Oliluoto 1 and 2, maintenance design since 1985 Olkiluoto 3 Expert services Boiler design for Metso Power Helsingin Energia maintenance design ENGINEERING AND DESIGN 14

17 FCG Finnish Consulting Group FCG Finnish Consulting Group Oy P.O. Box 30 Osmontie Helsinki Päivi Piispa Planning Director FCG Finnish Consulting Group provides consulting services related to energy and climate sector including renewable energy, energy effi ciency, land use, waste management and entire energy infrastructure planning for municipalities. Renewable energy solutions in the fi eld of wind power and solar energy. Improvement of energy effi ciency in buildings. Benchmarking the performances in order to implement the Energy Effi ciency Agreements of municipalities. Energy Effi ciency Audits Land use and zoning of wind power projects in the West coast of for different investors. Consulting of energy trading in the Finnish forestry related energy solutions. Benchmarking the operations to perform the Energy Effi ciency Agreement in a Finnish city of citizens. ENGINEERING AND DESIGN KPM-Engineering Oy Kalevantie 7 C Tampere M EUR Matti Mikkola CEO matti.mikkola@kpmeng.fi KPM-Engineering Oy KPM-Engineering Oy is a structural engineering company producing technical engineering plans for the building, machine, equipment, plant, and shipbuilding industries. Most of our structural engineering projects are industrial or commercial buildings, both in and abroad. With our experience, competence and innovative nature we can secure the best possible solutions for our clients both fi nancially and technically. Our steel structure business unit is specialised in designing steel frameworks, roof structures and cladding panels. Our reinforced concrete structure business unit is specialised in industrial buildings. Foster Wheeler Energia Oy: CFB boiler, Norrköping, Sweden, m 3, 2008 Metso Power Oy: recox boiler, Kymi RB,, m 3, Veracel Celulose S.A.: the largest single line pulp mill, Brazil, m 3, ENGINEERING AND DESIGN 15

18 Ramboll Oy Ramboll Oy P.O. Box 3 Piispanmäentie Espoo over 1100 in Esa Tepponen Head of Unit esa.tepponen@ramboll.fi Ramboll is part Ramboll Group, a consulting company with more than 8000 specialists in 23 countries. We provide engineering, consultancy, product development and operation services within the areas of infrastructure, industrial and energy processes, buildings, water and environment and management consulting. Our expertise in energy and industry sector comprises waste-toenergy, biofuels, CHP, wind and industrial processes etc. Power plant (Tampere,, ) utilizes peat and wood for production of district heat. Our services: e.g. concept feasibility study, detailed design. Waste-to-energy power plant (Turku,, 2003 ) Our services: e.g. operational supervision, design and supervision of modifi cation work. The Igelsta CHP plant (Södertalje, Sweden, ) is Sweden s largest bio-fuelled combined heat and power unit. Our services: e.g. automation and electrifi cation work of boiler. ENGINEERING AND DESIGN 16

19 OTHERS Componenta Oyj Panuntie Helsinki M EUR (2008) Lauri Eklin Sales Director lauri.eklin@componenta.com Componenta Oyj Componenta is a metal sector company with international operations and production plants located in, Turkey, the Netherlands and Sweden. The net sales of Componenta were EUR 681 million in The Group employs approx. 3,800 people. Componenta s shares are quoted on the NASDAQ OMX Helsinki. Componenta specializes in supplying cast and machined components and total solutions made of them to its global customers who are manufacturers of vehicles, machines and equipment. Casting, machining, painting, engineering Moventas Siemens Wärtsilä CASTINGS FOR WIND TURBINES AND GEARBOXES 17

20 Subsidiaries abroad Cupori Group Oy/Cupori Oy Kuparitie Pori M EUR Own sales offi ces in, Sweden, Norway, UK, Germany, Italy, Poland and Russia Jaana Matilainen Marketing Director jaana.matilainen@cupori.com Cupori Goup Oy Cupori Group Oy is a leading supplier of copper plumbing installation tubes in the Nordic countries and one of the major suppliers of industrial tubes in Europe. Our customer-oriented business is based on fl exibility and innovation in the development of new products, solutions and services. If you have specifi c requirements on dimensions, mechanical properties or delivery forms, we are interested in meeting the challenge and developing new solutions for these requirements. We use phosphorous deoxidized copper Cu-DHP (CW 024A) and oxygen-free copper (CW 008A). The company was previously part of Outokumpu Oyj. Cupori Group Oy purchased Outokumpu Oyj s copper tube business in the summer of Material, material technologies and development Knowledge of material, material technologies and development since COPPER TUBES FOR E.G. COAXIAL CABLES Subsidiaries and representavives abroad GreenStream Network Plc Kluuvikatu Helsinki Beijing, Berlin, Gothenburg, Hamburg, Moscow, Kiev, Oslo, Stockholm, Vilnius Greenstream GreenStream Network is a leading Northern European company providing investment opportunities, intermediary and advisory services in the carbon and renewable energy markets. Develops and manages investment vehicles investing in renewable energy and carbon commodities and projects. Supports clients in defi ning and developing strategies towards the risks of a carbon-constrained economy and for carbon and certifi cate business. Offers both brokerage and consultative portfolio management. Jussi Nykänen CEO jussi.nykanen@greenstream.net Fine Carbon Fund (FCF) and Nordic Carbon Fund (NCF) acquire carbon credits for Nordic investors Blåfall fund (20 million EUR) builds small hydropower plants in Norway, Biogas Fund Europe (BFE) invests in small scale biogas plants in Central Europe FINANCING AND CONSULTING 18

21 MSc Electronics oy MSc electronics Oy Alasniitynkatu Tampere Pekka Hytti Business Development pekka.hytti@msc.eu MSc electronics Oy is a Finnish company which has gained 25 years of experience in power electronics. The mission is to improve the customer s solutions energy effi ciency, help them to save energy and produce energy from renewable energy sources. MSc electronics has concentrated on developing and manufacturing power converters in range kw. Business is divided in four different business areas: Hybrid Drives Renewable Energy Power Back-Up Railway and Rolling Stock Grid-Tie Converters in use with many different types of renewable energy sources GRID-TIE CONVERTERS FOR SMALL WIND ENERGY Numerola Oy (Ltd) P.O. Box 126 Väinönkatu 7 C Jyväskylä M EUR Kai Hiltunen Director, founding partner kai.hiltunen@numerola.fi Numerola Oy Numerola is an expert company that offers simulation driven design services for device and process development. Our highly educated personnel includes experts in mathematics, software engineering and engineering sciences. We have developed computational technology in energy production in order to support the use of renewable energy sources. For example, we offer analysis and software engineering solutions related to emissions control, small-scale bio-combustion, wind energy as well as wave energy technology. Simulation & optimisation, engineering analysis, software engineering. AW Energy, HT Enerco, Ecocat, Kemira, Metso, Neste Jacobs, Valtra, Ramboll SIMULATION DRIVEN DESIGN SERVICES 19

22 Pemamek Ltd Pemamek Ltd P.O. Box 50 Lamminkatu Loimaa Jukka Rantala Director, Sales & Marketing pema@pemamek.com PEMA welding automation comes from Pemamek Oy Ltd, the world s leading specialist in designing and manufacturing welding mechanisation and automation systems, and work-piece handling equipment. Pemamek uses and produces hi-tech: utilising the best available robot and automation technology, every PEMA product and system is uncompromisingly designed to improve customer competitiveness and productivity. Established in 1970, Pemamek has constantly strived to supply the best welding automation solutions in the world. Production automation for: boiler panel manufacturing windmill tower manufacturing With its long experience of supplying technically-advanced equipment to well-known boiler manufacturers, Pemamek has the right solutions, and has recently developed some new techniques for wind turbine tower suppliers to support this growing alternative energy sector. PRODUCTION AUTOMATION FOR WINDMILL TOWER PowerQ Oy Hermiankatu 8 D Tampere Petri Trygg Managing Director petri.trygg@powerq.fi PowerQ Oy PowerQ is specialised in producing solutions for measurement data management. We offer effi cient software products for measurement and control. Measurement and data analysis Power quality Disturbance analysis Web technologies Databases Control and monitoring of objects Industrial customers working on energy production or demanding high quality energy for their manufacturing processes. MONITORING AND CONTROL 20

23 Oy Primo Ab Oy Primo Ab P.O. Box Vaasa M EUR Niclas Häggblom Country Sales Manager niclas.haggblom@primo.fi Primo is a resource centre and strategic partner in integrated plastic solutions. Primo can supply all types of extruded plastic profi les from the simplest to the most complex. Innovation, Development process, Tool manufacturing, Compounds, Extrusion, Pultrusion, Quality and Logistics Energy Segment Customers PLASTIC EXTRUSION, PULTRUSION Process Flow Ltd Puolalanpuisto 1bA Turku ow.fi Juha Tanttari Marketing and sales juha@processfl ow.fi Process Flow Ltd The cornerstones of Process Flow business operations are: Modeling and simulation services Modeling and simulation software tools These cornerstones are built on a strong technological know-how and an in-depth understanding of mathematical modeling, computational fl uid dynamics (CFD), fi nite element analysis (FEA) and industrial processes. Simulation softwares used and represented by Process Flow are widely recognized standard tools for large-scale industrial simulation: ANSYS and ANSYS Fluent, Concepts NREC, DEM Solutions, FFT, Sigma Technology optimization package IOSO. Fluidized bed, combustion modeling: A better combustion was found by designing the air inlets, enabling lower NOx and CO levels Exhaust Gas Scrubber: Analysis of non-catalytic NOx reduction in FBC freeboard MODELING AND SIMULATION 21

24 Oy Rikta Ab Balticvägen Bosund M EUR Oy Rikta Ab Oy Rikta Ab is a company specialized in the manufacturing of customer-driven and fl exible wire harness and cable solutions designed to transfer information and power in all types of environments. Established in 1969, Rikta is one of s oldest companies in its sector. Rikta s long experience and solid know-how guarantees proven solutions. Finding the best and most effi cient solution is often a result of a close cooperation with our customers. Delivery accuracy, reliability, fl exibility and high quality are cornerstones of our activities. Many of our customers are market leaders in their respective fi elds. Karl Erik Westö Managing Director karl.westo@rikta.fi Wire harnesses, cable solutions, spiral cables, mechanical and electrical assemblies Long experience of deliveries to the energy industry. WIRE HARNESS AND CABLE Subsidiaries abroad VNT Management Ltd Yrittäjänkatu Vaasa M EUR Munich Jarmo Saaranen President jarmo.saaranen@vntm.com VNT Management Ltd VNT Management Ltd is a venture capital company investing into renewable energy and other cleantech companies. Especially interested in electrical systems in the above areas. Management and development of business-to-business growth companies on international market. Technology, business models, networking. See FINANCING 22

25 YRJ technology Oy YRJ technology YRJtechnology Oy Kiviveistämöntie Pori M EUR Yrjö Rinta-Jouppi Managing Director yrjo.rinta-jouppi@kolumbus.fi Wind resource measuring, analysing and calculating the goodness of site for wind mill, by using 100 m al mast, GSM mast or SODAR. All effecting factor to wind power price 15 years continuing wind measuring doctoral thesis 2003 concerning offshore wind power SITE ANALYSIS, EVALUATION 23

26 24

27 Finnish Competence Network Finnish Competence Network -series on Renewable Energy Technologies will continue to concentrate on introducing the energy technologies with following scopes (preliminary categories): Boilers and Combustion Technologies Already published: Burners Refractories, insulation, cladding and coating Fans Steel constructions, tanks and vessels Air and fl ue gas ducting, superheaters Water and steam piping Valves Stacks and chimneys Engineering and Design R&D Hydropower Dam structures Water turbines Generators Control devices Engineering and Design R&D Recycled Fuel Collection and compactors Transport vehicles and devices Crushing, screening, separating devices Conveyers Automation, hydraulics Balers, pelletizers Gasifi cation Engineering and Design R&D Heat pumps Boiler tanks Evaporators, condensors Circulation pumps, compressors Components manufacturing Instrumentation and control devices Frame structures Assembly Engineering and Design R&D Project Funding: European Regional Development Funds (ERDF) /Satakunta Employment and Economic Development Centre (TE-Keskus) Pori Regional Development Agency Ltd (POSEK) Regional Council of Central (Keski-Suomen Liitto) Vaasa Region Development Company (VASEK) City of Tampere City of Lapua City of Seinäjoki City of Vaasa City of Mustasaari 25

28 CONTACT Tanja Suominen Project Manager Renewable Energy Technologies tel