sliding & folding door essentials

Transcription

1 sliding & folding door essentials for furniture exclusively brought to you by häfele

2 Häfele - sliding & folding door essentials - for furniture / CONTENTS SLIDING AND FOLDING DOOR - ESSENTIALS FOR FURNITURE timber doors flush fitted forefront infront System name Configuration Max. door height (mm) Max. door width (mm) Door thickness (mm) Max. door weight (kg) No. of doors Soft Close EKU Frontino 20 Flush fitted Yes 4-5 EKU Frontino 40 Flush fitted Yes 6 EKU Combino 20/35 Forefront and 35 2 or 3 Yes 7 EKU Combino 45 Forefront or 3 Yes 8 EKU Combino 60 Forefront or 3 Yes 9 Page No. EKU Clipo 16 Infront Yes EKU Clipo 26/36 Infront and 36 2 or 3 Yes SLIDO Classic 55 Infront or 3 No 14 frameless glass doors System name Configuration Max. door height (mm) infront Max. door width (mm) Glass thickness (mm) Max. door weight (kg) No. of doors Soft Close Page No. EKU Clipo 16 Infront Yes SLIDO Design 25 Infront 6 and No EKU Clipo 36 Infront and Yes

3 folding doors Bi-folding folding & sliding System name Configuration Max. door height (mm) SALICE Concertina HAWA Multifold 30W Max. door width (mm) Door thickness (mm) Max. door weight (kg) No. of doors Bi-folding Bi-folding Page No. TWINLINE 25/50 Bi-folding and HAWA Multifold 30 Folding & Sliding , 4, 6 26 pivot sliding & pivot folding doors System name Configuration Max. door height (mm) HAWA Concepta 25/30/40/50 HAWA Folding Concepta 25 pivot sliding Max. door width (mm) Door thickness (mm) pivot folding Max. door weight (kg) No. of doors Pivot sliding , 30, 40, Pivot folding Page No. 3

4 Häfele - sliding & folding door essentials - for furniture / EKU-FRONTINO 20 for timber doors top or bottom RUNNING, up to 20kg flush fitted bottom running 1 For 2 doors 4

5 top running >Max. > door height (mm): 1000 > > Door width (mm): > > Door thickness (mm): > > Material:, rollers: Plastic > > Running gear: bottom or top running, 4-point guidance > > Running gear guided by: Ball bearings > > Door stop: stopper system with soft closing mechanism integrated in running equipment > > Mounting: running gear and rails for screw fixing > > Installation depth (mm): 270 > > Max. handle depth (mm): 50 >Distance > from handle to door edge: Handle depth > > Door arrangement: Symmetrical Fitting sets For cabinet width (mm) Door width (mm) Cat. No. Version For furniture Top running or bottom running, For kitchens Top running, with concealed fixings Packing: 1 set 1 1 For 2 doors For 2 doors Top running installation Bottom running installation Note: > > Both doors must have identical dimensions. > > The door width specified in the ordering table was calculated with 2 mm door gaps For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue...p

6 Häfele - sliding & folding door essentials - for furniture / EKU-FRONTINO 40 for timber doors top RUNNING, up to 40kg flush fitted Top running installation > > Version: symmetrical door arrangement > > Max. door height (mm): 2380 (cabinet 2400) > > Door width (mm): > > Door thickness (mm): 19 > > Material:, rollers: Plastic > > Running gear: Top running, 4-point guidance > > Running gear guided by: Ball bearings > > Door stop: stopper system with soft closing mechanism integrated in running equipment > > Mounting: running gear and rails for screw fixing > > Installation depth (mm): Top 250, bottom 170 > > Max. handle depth (mm): 30 >Distance > from handle to door edge: Equal to handle depth Fitting sets For cabinet width (mm) Door width (mm) Cat. No. Version Tall cabinet Packing: 1 set 1 Top running, for 2 doors 1 For 2 doors Note: Both doors must have identical dimensions. The door width specified in the ordering table was calculated with 3 mm door gaps For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue... p

7 EKU-Combino 20/35 Forefront For timber doors bottom RUNNING, up to 20/35kg, with soft close mechanism (optional) > > Max. door height (mm): 2200 > > Max. door width (mm): 1200 > > Door thickness (mm): 19 >height > adjustment (mm): Eccentric adjustment of +4/-2 1 For 2 doors 2 For 3 doors Note: Insert retaining clips before assembly of the double guide rail. Fitting sets For 2 doors For 3 doors Version EKU Combino EKU Combino 20 soft close EKU Combino EKU Combino 35 soft close Packing: 1 set Running rails and accessories Material Colour/Finish Length (mm) Cat. No. Upper guide rail, pre-drilled Bright Lower running rail, pre-drilled Anodised Cover profile, for upper guides Anodised Intermediate stop, for 3 door fitting sets Plastic/Steel Grey/Galvanised For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue... p

8 Häfele - sliding & folding door essentials - for furniture / EKU-combino 45 Forefront For timber doors bottom RUNNING, up to 45kg, with soft close mechanism (optional) > > Max. door height (mm): 2400 > > Max. door width (mm): 1400 > > Door thickness (mm): > > Height adjustment (mm): Eccentric height adjustment of ±3 on running gear > > Features: easy door mounting Comfortable rail mounting and stopper adjustment from front Fitting sets Door thickness (mm) For 2 doors For 3 doors Version EKU Combino EKU Combino 45 soft close Packing: 1 set Running rails and accessories Material Length (mm) Cat. No. Upper guide rail, with screw mounting holes Lower running rail, with screw mounting holes Cover profile for upper guides on outer door, bright, anodised, anodised Centre door stopper for outer door for 3 door sets Plastic, grey For 2 doors 2 For 3 doors For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue... p

9 EKU-combino 60 Forefront For timber doors BOTTOM RUNNING, up to 60kg, with soft close mechanism (optional) > > Max. door height (mm): 2600 > > Max. door width (mm): 1400 > > Door thickness (mm): 25 > > Adjustment (mm): comfortable eccentric height adjustment of +4/-2 on running gear > > Features: tool-less door mounting via spring-loaded guide system > > Recommended door overlay (mm): Running rails suitable for all types of cabinets 1 For 2 doors 2 For 3 doors Note: Install guide buffers into running and guide railsbefore assembly. Fitting sets For 2 doors For 3 doors Version EKU-Combino EKU-Combino Packing: 1 set Running rails and accessories Material Length (mm) Cat. No. Upper guide rail, pre-drilled Lower running rail, pre-drilled, anodised, anodised Intermediate stop, for 3 door fitting set Plastic, grey For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue... p

10 Häfele - sliding & folding door essentials - for furniture / EKU-clipo 16 infront for timber doors top RUNNING, up to 16kg, with soft close mechanism (optional) Version A with clip-on running gear and thumbwheel adjuster Version A With single running rails, swivel lug mounted Version A With single running rails, screw mounted Version B with concealed slide-in running gear Version B With dual running rail, screw mounted Minimum door width for 1 soft close mechanism mm Minimum door width for 2 soft close mechanism mm Door overlap Cabinet installation 10

11 Version A running gear installation Version B running gear installation > > Max. door height (mm): 1400 > > Max. door width (mm): 1000 > > Door thickness (mm): > > Height adjustment (mm): +2/-1 on running gear using adjusting wheel > > Material: Housing, running gear and guide: plastic > > Running gear: top running, 2 rollers. Friction bearing mounted plastic roller, steel axle > > Door stop: top stopper, with retainer for sliding into single top running rail > > Installation: housing for screw fixing, running gear without tools (quick fixing system), guide for press fitting into drill hole Running rails and accessories Material Colour/Finish Length (mm) Cat. No. Single running rail, for screw fixing. Min. Timber thickness 30 mm. Single running rail with swivel lugs (Not for hardwood or MDF). Min. Timber thickness 19 mm. Running rail-end piece with swivel lug (Not for hardwood or MDF). Bright Bright Plastic Grey Running rail-end piece for screw fixing Plastic Grey Double running rail, for screw fixing. Min. Timber thickness 19 mm. Single bottom guide rail, ribbed, for press fitting and glue fixing into 7 mm groove Soft closing mechansim for retrofitting or for soft closing on both sides, with installation instructions Bright Plastic Anthracite Plastic Fitting sets For 2 doors Version For 2 doors A For 2 doors with 8-16 kg soft close mechanism (2 pieces), Min. door width = 620 mm B For 1 door with installation instructions Packing: 1 set Note: Order one soft closing mechanism each for door widths of 400 mm to 620 mm, two soft closing mechanisms for door widths above 620 mm. Grey < 8kg kg For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue... p

12 Häfele - sliding & folding door essentials - for furniture / EKU-clipo 26/36 infront for timber doors Top running up to 26 / 36kg with soft close mechanism (optional) Version A with clip-on running gear Version A running gear installation CLIPO 36 CLIPO 26 Version B with concealed slide-in running gear Version B running gear installation Installation of housing 12

13 > > Door height (mm): Version A: <2,200, Version B: <2,400 > > Door width (mm): <1,000 > > Door thickness (mm): > > Material: housing: Plastic, running gear: Zinc alloy, guide: Plastic > > Running gear: top running; Clipo 26 with 2 rollers, Clipo 36 with 4 rollers > > Running gear guided by: Friction bearing mounted plastic roller > > Door stopper: top stopper, with retainer for sliding into single top running track 1 For 2 doors 2 For 3 doors Fitting sets Model Cat. No. Version A For 2 doors Clipo Clipo For 3 doors Clipo B For 1 door Clipo Packing: 1 set Note: Order one soft closing mechanism for door widths of 420 mm to 620 mm, two soft closing mechanisms for door widths above 620 mm. Running rails and accessories Material Finish/colour Length (m) Cat. No. Single running rail, with swivel lug Single running rail, pre-drilled, for screw fixing Bottom guide rail, for glue fixing Bright Double running rail, pre-drilled, for screw fixing Silver coloured anodised Silver coloured anodised Silver coloured anodised Single running rail end piece, for screw fixing Plastic Grey Single running rail end piece, with swivel lug Plastic Soft closing mechanism for door weights up to 15 kg Plastic Soft closing mechanism for door weights up to 26 kg Soft closing mechanism for door weights up to 36 kg For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue...p A

14 Häfele - sliding & folding door essentials - for furniture / slido-classic 55 for timber doors bottom RUNNING, up to 55kg infront > > Door thickness (mm): 16 > > Running gear: Bottom running, 1 roller >running > gear guided by: Steel ball bearing >height > adjustment (mm): ±2 1 For 2 doors 2 For 3 doors Note: > > fitting sets with height adjustment have a different drilling pattern for both doors with or doors without height adjustment. The centre door always has the drill hole for the height adjustment on the left hand side. Other doors always have the drill hole at the edge next to the side panel. > > Excellent running characteristics due to large roller diameters > > Individual door thickness possible Fitting sets Cat. No. Version For 2 doors For 2 doors with height adjustment For 3 doors For 3 doors with height adjustment Packing: 1 set Running rails and accessories Material Colour/Finish Length (mm) Cat. No. Single guide rail, top, not drilled Bright Single running rail, bottom, for press fitting, barbed Bright Single running rail, bottom, surface mounting Forstner drill bit, Ø 50 mm, 10 mm shank, for mounting the rollers in drilled holes Silver coloured anodised For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue... p

15 get up to date stock & pricing information, on all the products in this catalogue. plus much more! the new hafele.com.au! register now!

16 Häfele - sliding & folding door essentials - for furniture / EKU-clipo 16 infront for frameless glass doors top RUNNING, up to 16 kg with soft close mechanism (optional) Installation dimensions Version A: For top glass fixing profile and visible bottom guide. Shown with surface mounted running rails. Clipo 16 GPK Version Clipo B: 16 For GPPK top and bottom glass fixing profile and invisible bottom guide. Shown with surface mounted running rails. Door overlap 1 For 2 doors. Version B: For top and bottom glass fixing profile and invisible bottom guide. Shown with recess mounted running rails. 16

17 with optional soft close > > Version: A For top glass fixing profile and visible bottom guide. B For top and bottom glass fixing profile and invisible bottom guide > > Max. door height (mm): 1400 > > Max. door width (mm): 1000 > > Glass thickness (mm): > > Height adjustment: +2/-1 mm on running gear > > Material: Plastic > > Running gear: Top running, 2 rollers >running > gear guided by: Friction bearing > > Door stop: Top stopper, with retainer > > Installation: running gear without tools (quick fixing system), guide for screw fixing Fitting sets For 2 doors Version A Clipo 16, for top glass fixing profile and visible bottom guide. For 2 doors B Clipo 16, for top and bottom glass fixing profile and invisible bottom guide. For 2 doors Packing: 1 set Running rails and accessories Material Colour/Finish Length (mm) Cat. No. Double top running rail, for screw fixing, surface mounted Min. installation depth = 19 mm Double top running rail, for screw fixing, recess mounted Min. installation depth = 19 mm Rail end piece, with swivel lugs (not suitable for hardwood/ MDF) Silver anodised Silver anodised Plastic Grey Rail end piece, for screw fixing Plastic Grey Glass fixing profile, for glue fixing, for top and bottom of door Soft close mechanism, for door weight up to 8 kg for soft closing on both sides, with installation instructions Soft close mechanism, for door weight from 8 to 16 kg for soft closing on both sides, with installation instructions ELCH PRO 3B silicone adhesive 310 ml Note: Order one soft closing mechanism each for door widths of 400 mm to 620 mm, two soft closing mechanisms for door widths above 620 mm. Silver anodised Plastic Grey Plastic Grey Highly flexible, acetate curing silicone sealant Transparent For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue... p

18 Häfele - sliding & folding door essentials - for furniture / slido-design 25 for frameless glass doors bottom RUNNING, up to 25kg infront > > Running gear: Bottom running, 1 roller >running > gear guided by: Ball bearing mounted,plastic coated roller > > Glass thickness (mm): 6 and 8 Note: Quick and easy installation, running gears with slide-in technology for sliding into runner housing profile. Very smooth running action. Running gear installation Calculations: Glass height: C = X - (25 + 8) Glass width: A = internal cabinet width B = door overlap N = number of door leaves NE = number of end panels! A + B - NE x 2.5 N 2 A + B N 1 For 2 doors End piece with finger grip Closed-type Glass width:! End piece Closed-type Glass width:! Open-type Glass width: 2 End piece set with lock and centrepiece, open-type Glass width: 2 Open-type Glass width: 2 Mounting aid for running gear 18

19 System components Glass thickness (mm) For 2 doors, closed-type, without lock For 2 doors, closed-type, with lock For 2 doors, open-type without lock For 2 doors, open-type with lock Cat. No. Running gear, for sliding in and tightening 6 and Mounting aid for running gear 6 and Anti-derailment device and gasket, for clipping on and screwing into guide rail (length 50 mm) End piece, closed-type (for clipping on and tighening) End piece, open-type (for clipping on and tightening) End piece with finger grip, closed-type (for clipping on and tightening) End piece with finger grip, open-type (for clipping on and tightening) End piece with lock, and counterpiece, open type VCS18 cylinder core with reversible key, including 2 keys (up to 2000 key changes), with door lift-up safeguard (for clipping on and tightening) Packing: 1 set Running rails and accessories Double top guide rail, for screw fixing Double bottom running rail, for screw fixing, for use with end cap turn cylinder ( ) Double bottom running rail for screw fixing, for use with EFL 41 sliding door lock. Runner housing profile, for fixing the runner to the glass door Rubber profile for fixing glass into running housing profile** 6 and and and and and KD* KD* KA* KA* Note *Order Keyed to differ (KD) or keyed alike (KA) cylinder core as required. Dust protection profile Glass thickness (mm) Material Colour/finish Length (mm) Cat. No. 6 and 8 Silver anodised 6 and 8 Silver anodised and 8 Silver anodised and 8 Silver anodised x 32 x and 8 Rubber Black 1.5 x 32 x x 32 x , Silver anodised, Plastic Grey Note ** Groove in runner housing profile is 9 mm wide. This is important information for selecting the suitable rubber width. The inserted pane of glass may not exactly fit in the profiles as considerable tolerances can occur with glass. In this case it is required to glue the pane of glass into the profile using silicone, for example. For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue... p

20 Häfele - sliding & folding door essentials - for furniture / EKU-clipo 36 infront For frameless glass doors top running, up to 36kg. with soft close mechanism (optional) Version A: For top glass fixing profile and visible bottom guide. Version B: For top and bottom glass fixing profile and invisible bottom guide. Version C: For top glass clamp fixing and visible bottom guide. 1 For 2 doors Version A Version B Version C (1 Door) Version C (2 Doors) Shown with surface mounted running rails 20

21 > > Version: A For top glass fixing profile and visible bottom guide. B For top and bottom glass fixing profile and invisible bottom guide. C For top glass clamp fixing and visible bottom guide. > > Door height (mm): <2,000 > > Door width (mm): <1,000 > > For glass door thickness (mm): 6 8 > > Material: running gear and suspension fitting: Zinc alloy, guide: Zinc alloy or plastic > > Running gear: Top running, 4 rollers > > Running gear guided by: friction bearing mounted plastic roller, steel axle. > > Door stop: With retaining spring for sliding into top > > Soft close mechanism: running rail Optional, for sliding into top running rail. Fitting sets Version Cat. No. A For top glass fixing profile and visible bottom guide For 1 door B For top and bottom glass fixing profile and invisible bottom guide C For top glass clamp fixing and visible bottom guide Packing: 1 set Note: Order one soft closing mechanism for door widths of 420 mm to 620 mm, two soft closing mechanisms for door widths above 620 mm. Running rails and accessories Material Finish/colour Length (mm) Cat. No Single running rail, with swivel lug. Silver coloured, anodised Single running rail, pre-drilled, for screw fixing. Single running rail, pre-drilled, with flange for screw fixing. Single running rail for surface mounting, pre-drilled, for screw fixing. Double running rail, pre-drilled, for screw fixing. Not to be used with version C with top glass clamps. Silver coloured, anodised Silver coloured, anodised Silver coloured, anodised Silver coloured, anodised Single running rail end piece, with swivel lug. Plastic Glass fixing profile, top and bottom, for glue fixing. Not to be used with version C with top glass clamps. Soft closing mechanism for door weights up to 26 kg Silver coloured, anodised Plastic, Soft closing mechanism for door weights up to 36 kg Clip panel, for clipping onto glass clamp shoe, for version C only Silver coloured, anodised End caps and fixing clips for clip panel, for version C only Plastic Anthracite Locking system Cat. No. Locking system for Version B, with cylinder, right * Left hand Locking system for Version B, with cylinder, left lock shown For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue...p. 3.21A B and 3.23A B 21

22 Häfele - sliding & folding door essentials - for furniture / salice - concertina for timber doors up to 15kg. (30 KG PER PAIR) Bi-folding Assembly Mount the hinges of the fixed door onto the mounting plates on the cabinet side. We recommend the use of SALICE hinge with mounting plate or similar. Height adjustment Position the sliding block inside the rail by rotating it 90º. Lock the sliding block into position by turning the lever, marked in red. SALICE Concertina complate fitting set Cat. No. For 1 pair of doors Packing: 1 set Note: SALICE Hinges and mounting plates for carcase must be ordered separately. Supplied with: > > 1 piece , hinge for sliding block > > 1 piece , sliding block > > 3 pieces , central hinge with offset knuckle > > 1 piece , upper running rail > > 2 meters , adhesive finger-protection strip +2 mm -2 mm Note: The sliding block does not have a load-bearing function It must slide freely inside the running rail. > > Height adjustment of hinges assembled with the sliding components is achieved through a cam. > > Through this alignment a parallel movement of the component in the running rail is achieved. > > The result is a smooth movement without any binding. Depth adjustment +2.5 mm Note: Recommended maximum door leaf width 500 mm. > > Depth adjustment of the hinges mounted on the sliding component is achieved through the fixing screw of the hinge. > > Depth adjustment should be made in conjunction with the hinges mounted on opposing doors. > > This adjustment is useful to keep the L value constant along the front of the furniture. For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue...p

23 HAWA-multifold 30w for Timber doors up to 30kg (60kg per pair) bi-folding > > Max. door height (mm): 2600 > > Door width (mm): > > Door thickness (mm): > > Height adjustment (mm): ± 2 on the running gear > > Features: Same fitting applicable for Infront and Forefront installations Light, quiet running Horizontal seals reduce sound Quick assembly Lower guide not required, suitable for accessible cabinets without bottom panel Note: Please order accessories separately Fitting sets For 2 doors For 1 outer panel pair Running rails and accessories Material Colour/Finish Packing Cat. No. Interlocking door holder, between two panel pairs Plastic Black 1 Pair Sealing profile, for pressing into 2.5 mm groove mm length Rubber Black 1 Roll Milling jig for guides and suspension unit Laminated timber 1 Piece Packing: 1 set For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue...p

24 Häfele - sliding & folding door essentials - for furniture / TWINLINE 25/50 for timber doors up to 25/50kg per pair BI-FOLDING > > Features: load bearing running gears with two-wheel guidance Running gears clip-mount into top track Durable all-metal components TWINLINE 25 > > Max. door width (mm): 550 > > Door weight (kg): 25 (12.5 per door leaf) > > Door thickness (mm): TWINLINE 25/50 64 X = 56 + T 56 Ø35 Ø TWINLINE 25 T TWINLINE 50 TWINLINE 50 > > Max. door width (mm): 600 > > Door weight (kg): 50 (25 per door leaf) > > Door thickness (mm): doors thickness Number of concealed hinges per door The graph shown gives guideline information only. A trial hanging is recommended. The number of concealed hinges per door depends on: Door width and height Door weight Door material According to the example graph, three concealed hinges have to be mounted at a door height of 1,500 mm and a door weight of 9 to 12 kg. 24

25 TWINLINE 25 For door weights up to 25 kg Basic Set Left Hand Basic Set Right Hand Basic Set Left and Right Hand Standard Set Left Hand Standard Set Right Hand Standard Set Left and Right Hand Top running gear with 1 hinge (left/right hand) Connecting hinge with central knuckle Connecting hinge with lateral adjustment Cover cap, plastic, white Door to carcase alignment fitting 1 1 Door to door alignment fitting 1 Cat No TWINLINE 50 For door weights up to 50 kg Basic Set Left Hand Basic Set Right Hand Basic Set Left and Right Hand Standard Set Left Hand Standard Set Right Hand Standard Set Left and Right Hand Top running gear with 2 hinges (left/right hand) Connecting hinge with central knuckle Connecting hinge with lateral adjustment Cover cap, plastic, white Door to carcase alignment fitting 1 1 Door to door alignment fitting 1 Cat. No Running rails Top running rail profile Installation 1 2 Material Length (mm) Cat. No

26 Häfele - sliding & folding door essentials - for furniture / HAWA-multifold 30 for timber doors up to 30kg (60kg per pair) folding & sliding > > Max. door height (mm): 2600 > > Door width (mm): 500 (650 when fixed to carcase) > > Door thickness (mm): > > Height adjustment (mm): ± 2 on the running gear > > Running gear guided by: 2 ball bearing, plastic-coated 2 guide rolls of plastic > > Installation also possible in the fully assembled cabinets Fitting sets For 2 doors Version For 1 outer panel pair For 1 centre panel pair For 1 outer panel pair, with concealed hinges Running rails and accessories Material Colour/finish Length (mm) Packing Cat. No Upper running rail and lower guide rail set Silver anodised Set Set Interlocking door holder, between two panel pairs Plastic Black 1 Pair Folding door connection piece for connecting two panel pairs Steel Nickel-plated 1 Piece Sealing profile, for pressing into 2.5 mm groove Rubber Black Roll Milling jig for guides and suspension unit Laminated timber 1 Piece Central concealed hinge, with automatic closing, zinc die-cast Packing: 1 set 1 Piece For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue...p

27 available online 24/7 at > cad data > mounting instructions. > product information > stock availability > price register at now! 27

28 Häfele - sliding & folding door essentials - for furniture / hawa-concepta 25/30/40/50 pivot sliding for timber doors up to 25/30/40/50kg > > Features: Pivot/slide timber doors for furniture and room partitioning solutions. Unique scissor technology Accommodates large and heavy doors Adjustments are made from the front. All components are fixed on to the intermediate panel. Can be used in left or right handed applications. > > Door height (mm): for Concepta for Concepta for Concepta for Concepta 50 > > Door width (mm): > > Door thickness (mm): timber doors: Note: > > For large and heavy timber doors > > Modular system with four design options > > Carcase-independent covering of wall cavities > > Door adjustment from the front > > Body-side connection and angle for surface mounted doors must be ordered separately. Fitting sets Application Door height (mm) Door weight (kg) Cat. No For 1 door For timber doors Packing: 1 set Accessories Width (mm) Material Finish Length (mm) Cat. No Connecting profile. Order 2 pieces per door for connecting end panel to carcase. Interconnecting profile, for connecting 2 Concepta fittings together. Order 2 pieces for connecting 2 Concepta fitting sets Silver anodised Silver anodised For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue... p

29 hawa-folding concepta 25 pivot folding for timber doors up to 25kg > > Door width (mm): > > Door height (mm): or > > Max door weight (kg): 25 (per pair of panels 50) > > Door thickness (mm): > > Features: two pairs of folding doors enables complete opening of cabinets up to 2800 mm in width The folding door pair can be pushed fully flush with the external side Room-high designs without a cabinet base allow for recess enclosures and walk-in cabinets with uninterrupted flooring Cabinet designs for countertop to ceiling possible Adjustment are made from the front Integrated cabinet and side connectors for easy and simplified installation Unique scissor technology prevents jamming when folding and sliding Lock catch assembly for use with espagnolette locks Fitting set For 1 pair of folding doors Packing: 1 set Note: > > For large and heavy timber doors > > Modular system with four design options > > Carcase-independent covering of wall cavities > > Door adjustment from the front Door height (mm) Door weight (kg) Cat. No. Left Right Left Right Accessories Width (mm) Material Finish Cat. No Door positiong / door centering Bottom profile complete 1300 mm including cover cap, leading ramp and drilling jig aluminium anodised Silver anodised Magnetic centering part, including drilling jig, aluminium anodised 55 Silver anodised Reinforcement profile Anodised For detailed product information: > > Refer the Sliding and Folding Hardware for Furniture Catalogue... p

30 Häfele - sliding & folding door essentials - for furniture / index

31 index

32 Sliding & folding door essentials - for furniture Häfele Australia Pty. Ltd. 8 Monterey Road Dandenong Victoria 3175 Phone: Fax: (03) info@hafele.com.au Häfele New Zealand Ltd. 16 Accent Drive East Tamaki Auckland 2013 Phone: info@hafele.co.nz HÄFELE LOCATIONS: Australia I MELBOURNE I SYDNEY I NEWCASTLE I BRISBANE I ADELAIDE I LAUNCESTON I HOBART I PERTH New Zealand I Auckland I Wellington I Christchurch