PSSB05P. USB 3.0 Interface HDMI 1.4 Gigabit Ethernet esata

Transcription

1 ultra LOW CAPACITANCE - super speed bus protection - TVS ARRAY Description The is an ultra low capacitance transient voltage suppressor array, designed to protect super speed bus applications such as USB 3.0, HDMI.4 and esata from the damaging effects of Electrostatic Discharge and Electrical Fast Transients. The meets IEC (ESD) and IEC (EFT) requirements. At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. This device offers an ultra low capacitance and low leakage current in a miniature DFN--040 package. DFN- package Features Compatible with IEC (ESD): Air(Level ) 6kV, Contact(Level 3) 6kV Compatible with IEC (EFT) Compatible with IEC (Surge) 0 Watts Peak Pulse Power per Line (tp = 8/0µs) ESD Protection Low Clamping Voltage Protects One Bidirectional Line Ultra Low Capacitance: 0.3 pf Typical RoHS Compliant REACH Compliant applications USB 3.0 Interface HDMI.4 Gigabit Ethernet esata Mechanical characteristics Molded JEDEC DFN--040 Package Approximate Weight: milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 00: C 8mm Tape and Reel Per EIA Standard 48 Flammability Rating UL 94V-0 PIN CONFIGURATION R 0/ Page

2 typical device characteristics MAXIMUM 5 C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/0µs) - See Figure P PP 0 Watts Operating Temperature T A -55 to 50 C Storage Temperature T STG -55 to 50 C ELECTRICAL CHARACTERISTICS PER 5 C Unless Otherwise Specified PART NUMBER device marking RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (Fig. ) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE V WM ma V (BR) P = A V C WM I D MHz C J pf S R 0/ Page

3 typical device characteristics,000 figure peak pulse power vs pulse time P PP - Peak Pulse Power - Watts W, 8/0µs Waveform ,000 0,000 t d - Pulse Duration - µs I PP - Peak Pulse Current - % of I PP t f figure pulse wave form Peak Value I PP e -t t d = t/(i PP /) TEST WAVEFORM PARAMETERS t f = 8µs t d = 0µs t - Time - µs R 0/ Page 3

4 SPICE MODEL figure spice model I/O D D3 D D D ABD (D3) - Avalanche Breakdown Diode (TVS) LCRD (D/D): Low Capacitance Rectifier Diode table - spice parameters parameter unit abd/tvs(d3) LCRD (D) LCRD (D) BV V IBV ma C jo pf I S A E- E- E- Vj V M N -... R S Ohms TT s E-9 E-9 E-9 EG ev R 0/ Page 4

5 typical device characteristics figure 3 eye diagram - USB R 0/ Page 5

6 application information D+, D- V DD Rx+, Rx- GND GND Tx+, Tx- figure - USB 3.0 Protection Six devices placed right at the entry point of the connector or at the individual transmission traces. The provides dedicated ESD protection for each super high speed line for the USB interface. PCB traces are not constrained by the protection devices and can be routed in a manner that best suits the design. These devices can also provide protection for USB.0 applications. circuit board recommendations Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. The path length between the TVS device and the protected line should be minimized. All conductive loops including power and ground loops should be minimized. The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. Ground planes should be used whenever possible. For multilayer PCBs, use ground vias R 0/ Page 6

7 DFN--040 package information outline dimensions L dim millimeters inches min max min max A B C BOTTOM VIEW L4 A TOP VIEW H 0~0.0 0~0.0 0~ ~0.004 L L L L BSC 0.06 BSC NOTEs. Dimensioning and tolerances per ANSI Y4.M, Controlling dimension: inches. 3. Dimensions are exclusive of mold flash and metal burrs. C H B SIDE VIEW dim pad layout dimensions millimeters inches min max min max A B C NOTES. Controlling dimension: inches. A C B R 0/ Page 7

8 TAPE AND REEL T D P P0 0 Pitches Cumulative Tolerance on tape ± 0. E Top Cover Tape K0 A0 B0 F W P User Direction of Feed specifications Tape Reel Dia. A0 B0 K0 D E F W P0 P P tmax Width 78mm (7 ) 8mm 0.70 ± ± ± ± ± ± ± ± ± ± Notes. Dimensions are in millimeters.. Surface mount product is taped and reeled in accordance with EIA Suffix - T70 = 7 Reel - 0,000 pieces per 8mm tape. 4. Marking on Part - marking code (see page ). Package outline, pad layout and tape specifications per document number R 3/ - Option. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty n/a -T70 0,000 7 n/a This device is only available in a Lead-Free configuration R 0/ Page 8

9 company information COMPANY PROFILE In business more than 0 years, ProTek Devices is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 99 South Fair Lane Tempe, Arizona 858 USA By Telephone General: Sales: & Marketing: Customer Service: Product Technical Support: By Fax General: By Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road, #06-9 Zervex Singapore Tel: Fax: Web COPYRIGHT ProTek Devices 00 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory R 0/ Page 9